staging: brcm80211: unifdef -UWLC_LOW_ONLY

Part of BMAC removal.

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: unifdef -UWLC_HIGH_ONLY

Part of BMAC removal.

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replaced PKTSETLEN macro by native __skb_trim call

- removed PKTSETLEN macro and used __skb_trim call instead.
- removed unused macros PKTSETPOOL and PKTPOOL

Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace PKTPUSH and PKTPULL macros with native skbuff calls

Replacing PKTPUSH by skb_push() call and PKTPULL by skb_pull() call to make
it obvious what the operation is doing with the packet.

Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: brcmfmac: cleanup bcmsdh_(un)register

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: brcmfmac: remove PCI SDIO controller binding

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sst: remove rest of aava bits and aava related code

This removes the remaining bit of aava dependent and related bits from driver

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: spectra: asynchronous init

The spectra nand driver takes quite some time to initialize because
it needs to scan the whole nand disk to find the latest block table.
This patch initializes the spectra nand driver asynchronously so that
other things in the kernel can initialize in parallel to the scanning
operation.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: spectra: move all init logic into nand_pci_probe

Currently there are some driver initialization logic that
is not part of nand_pci_probe function. This will result in
that part of driver initialization code executing even on
platforms without the corresponding hardware which is always
dangerous.

Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: ft1000-usb: freeing uninitialized pointer

GCC complains that if (info->CardReady) is false we kfree() an
uninitialized pointer.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: nicpci.c: replace osl based PCI calls with native linux pci calls

Get rid of the private PCI access routines and replace with standard calls from linux/pci.h in nicpci.c

(The private versions are still used in siutils.c... for now)

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: s/osl_t/struct osl_info/g

Do the substitution (and then fix all the dang lines that were pushed past 80 columns.)

Some of the touched lines triggered checkpatch warnings for completely unrelated
reasons that were already there. Those will have to be addressed later.

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: completely remove osl_pubinfo_t typedef

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: expose osl contents and start combining osl and pub_osl.

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: signedness bug in InitCardAndDownloadFirmware()

status is used to store negative error codes throughout.  The only place
where this is a runtime bug is if create_worker_threads() fails.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: signedness bug in StoreSFParam()

wrm() returns negative error codes so "ret" needs to be signed here.
There was place where wrm() returned positive EACCES instead of
negative -EACCES so I fixed that as well.  Also a few checkpatch.pl
issues.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: fix iio/gyro typos, build errors

Typo causes build errors.  Did anyone even build this driver?

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio/dds: double locking bugs

This is a static checker patch and I don't have this hardware.

This code is unusual because while I've often seen a double lock, this
is the first time I've seen code that takes a lock 11 times in a row.  I
feel like I must have missed something.  But I've looked very carefully
I don't see any way the original code is correct.  Does spi_sync()
somehow release the lock in a way that I can't see?  Even if it does,
the locking would still be wrong.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cptm1217: move free under dereference

We dereference "ts" in the printk so move the kfree() down a line.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/easycap: make module params private/static, fix build

The easycap driver has module parameters (bars, gain, & debug)
with global scope that intrude on the kernel namespace and cause
build problems.  Change the names of them to be driver-specific
and make 2 of them static.

drivers/built-in.o:(.bss+0x97c00): multiple definition of `debug'
ld: Warning: size of symbol `debug' changed from 58 in arch/x86/built-in.o to 4 in drivers/built-in.o

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: fix ste_rmi4 build, depends on INPUT

The synaptics_i2c_rmi4 driver uses input_*() interfaces,
so it should depend on INPUT to fix its build errors:

ERROR: "input_event" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_free_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_register_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_set_abs_params" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_allocate_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!
ERROR: "input_unregister_device" [drivers/staging/ste_rmi4/synaptics_i2c_rmi4.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: naveen.gaddipati@stericsson.com, js.ha@stericsson.com
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: autofs: fix coding style issue in dirhash.c

This is a patch to the dirhash.c file that fixes up a number of issues
found by the checkpatch.pl tool

Signed-off-by: Tushar Mehta <tushariiitb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: add explanation of no-op set_multicast_list

I was going to remove netvsc_set_multicast_list() so I think it is worth
adding a comment since it isn't immediately clear why you would want
this.

Signed-off-by: Brandon Philips <brandon@ifup.org>
Acked-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging: Remove unnecessary casts of netdev_priv

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging: Remove unnecessary casts of pci_get_drvdata

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging: Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: brcmfmac: remove PXA SDIO controller binding

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused osl_pkt{get,free}_static

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: get rid of last bit of pci configspace workaround.

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: simplify pci_config_read/write osl routines.

Start simplifying osl with goal of purging it entirely.

Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: fix typo in error message

Fix typo in error message of dux commands allocation.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: ca91cx42: mark the registers' base address pointer as __iomem

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: tsi148: mark the registers' base address pointer as __iomem

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: mark struct vme_master_resource's base address pointer as __iomem

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme_user: mark user-space buffers with __user

Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme_user: remove __iomem marking from kern_buf and derivates

kern_buf is not iomem; it comes from kmalloc and is directly
dereferenced.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme_user: use an unsigned int for counting the number of kparams

unsigned int is what struct kparam_array internally uses.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme_user: declare private variables as static

Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: ca91cx42: declare static functions as such

Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: tsi148: declare static functions as such

Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: tsi148: remove unreachable line

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: tsi148: fix warning in free_irq

The cookie passed to request_irq isn't the same as the one passed
to free_irq, which results in the following warning:

[   63.243533] WARNING: at kernel/irq/manage.c:899 __free_irq+0x9b/0x17d()
[   63.243533] Hardware name:
[   63.243533] Trying to free already-free IRQ 17
[   63.243533] Modules linked in: vme_tsi148(-) vme e1000e iTCO_wdt iTCO_vendor_support [last unloaded: scsi_wait_scan]
[   63.243533] Pid: 2013, comm: rmmod Not tainted 2.6.35 #2
[   63.243533] Call Trace:
[   63.243533]  [<ffffffff81036ea3>] warn_slowpath_common+0x80/0x98
[   63.243533]  [<ffffffff81036f4f>] warn_slowpath_fmt+0x41/0x43
[   63.243533]  [<ffffffff810678c4>] __free_irq+0x9b/0x17d
[   63.243533]  [<ffffffff810679d9>] free_irq+0x33/0x4e
[   63.243533]  [<ffffffffa004a897>] tsi148_irq_exit+0x6b/0x70 [vme_tsi148]
[...]
[   63.243533] ---[ end trace bbf92311d969efb4 ]---

Fix it by passing the same cookie to both functions.

Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: tsi148: remove double freeing of the IRQ in .remove

tsi148_irq_exit is called twice in .remove, which causes an oops.

Remove the second call, which apart from being redundant cannot
possibly work; the CR/CSR space has been already unmapped.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: tsi148: use list_for_each_safe when deleting resources in .remove

This fixes an oops when removing the module.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: fix bogus clearing of the bus number in vme_free_bus_num

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme_user: remove unreachable line

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme_user: return the appropriate error code when module_init fails

When init_module fails, 0 is returned anyway; the module is then installed
and oopses when we try to remove it:

[ 3236.368009] WARNING: at drivers/base/driver.c:262 driver_unregister+0x36/0x6f()
[ 3236.368012] Hardware name:
[ 3236.368014] Unexpected driver unregister!
[ 3236.368016] Modules linked in: vme_user(-) vme_tsi148 vme e1000e iTCO_wdt iTCO_vendor_support [last unloaded: vme]
[ 3236.368027] Pid: 16162, comm: rmmod Not tainted 2.6.35 #2
[ 3236.368029] Call Trace:
[ 3236.368037]  [<ffffffff81036ea3>] warn_slowpath_common+0x80/0x98
[ 3236.368044]  [<ffffffff81060a65>] ? __try_stop_module+0x0/0x58
[ 3236.368049]  [<ffffffff81036f4f>] warn_slowpath_fmt+0x41/0x43
[ 3236.368054]  [<ffffffff81060a65>] ? __try_stop_module+0x0/0x58
[ 3236.368059]  [<ffffffff811e8f78>] driver_unregister+0x36/0x6f
[ 3236.368066]  [<ffffffffa004aa44>] vme_unregister_driver+0xd/0xf [vme]
[ 3236.368072]  [<ffffffffa00616c8>] vme_user_exit+0x10/0x1e [vme_user]
[ 3236.368076]  [<ffffffff810612c1>] sys_delete_module+0x1ba/0x226
[ 3236.368082]  [<ffffffff812d6e14>] ? do_page_fault+0x25d/0x28a
[ 3236.368088]  [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[ 3236.368092] ---[ end trace cab6d88ebc44c1de ]---

The appended fixes it by returning the appropriate error code in module_init
whenever something goes wrong, thus cancelling the insertion of the module.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: vme: style: convert '&(foo)' to '&foo'

done with
find . -name '*.c' | xargs perl -p -i -e 's/&\(([^()]+)\)/&$1/g'

Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ft1000: Copy from user into correct data

While doing a ktest.pl I used a MIN_CONFIG that had STAGING enabled, and
a randconfig with CONFIG_DEBUG_STRICT_USER_COPY_CHECKS enabled caught
the following bug:

In file included from /home/rostedt/work/autotest/nobackup/linux-test.git/arch/x86/include/asm/uaccess.h:571:0,
                 from /home/rostedt/work/autotest/nobackup/linux-test.git/include/linux/poll.h:14,
                 from /home/rostedt/work/autotest/nobackup/linux-test.git/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c:32:
In function 'copy_from_user',
    inlined from 'ft1000_ChIoctl' at /home/rostedt/work/autotest/nobackup/linux-test.git/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c:702:36:
/home/rostedt/work/autotest/nobackup/linux-test.git/arch/x86/include/asm/uaccess_32.h:212:26: error: call to 'copy_from_user_overflow' declared with attribute error: copy_from_user() buffer size is not provably correct

Looking at the code it was obvious what the problem was. The pointer
dpram_data was being allocated but the address was being written to.
Looking at the comment above the code shows that it use to write into an
element of that pointer where the '&' is appropriate. But now that it
writes to the pointer itself, we need to remove the '&' otherwise we
write over the pointer and not into the data it points to.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ft1000: Fix error goto statements.

With commit 2dab1ac81b4767095f96503a9ac093a68c6e9c95 there
was intruduced error which lead to stopping uninitialized
kthread which leads to kernel panics.

This patch fix problems with common entry point in correct
way.

Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Merge 2.6.37-rc2 into staging-next

This was necessary in order  to resolve some conflicts that happened
between -rc1 and -rc2 with the following files:
drivers/staging/bcm/Bcmchar.c
drivers/staging/intel_sst/intel_sst_app_interface.c

All should be resolved now.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Linux 2.6.37-rc2

capabilities/syslog: open code cap_syslog logic to fix build failure

The addition of CONFIG_SECURITY_DMESG_RESTRICT resulted in a build
failure when CONFIG_PRINTK=n.  This is because the capabilities code
which used the new option was built even though the variable in question
didn't exist.

The patch here fixes this by moving the capabilities checks out of the
LSM and into the caller.  All (known) LSMs should have been calling the
capabilities hook already so it actually makes the code organization
better to eliminate the hook altogether.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  arm: omap1: devices: need to return with a value
  OMAP1: camera.h: add missing include
  omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts
  OMAP2: Devkit8000: Fix mmc regulator failure

Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (w83795) Check for BEEP pin availability
  hwmon: (w83795) Clear intrusion alarm immediately
  hwmon: (w83795) Read the intrusion state properly
  hwmon: (w83795) Print the actual temperature channels as sources
  hwmon: (w83795) List all usable temperature sources
  hwmon: (w83795) Expose fan control method
  hwmon: (w83795) Fix fan control mode attributes
  hwmon: (lm95241) Check validity of input values
  hwmon: Change mail address of Hans J. Koch

Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Sanity checks on adapter registration
  i2c: Mark i2c_adapter.id as deprecated
  i2c: Drivers shouldn't include <linux/i2c-id.h>
  i2c: Delete unused adapter IDs
  i2c: Remove obsolete cleanup for clientdata

Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: sysfs: fix printk warnings
  PCI: fix pci_bus_alloc_resource() hang, prefer positive decode
  PCI: read current power state at enable time
  PCI: fix size checks for mmap() on /proc/bus/pci files
  x86/PCI: coalesce overlapping host bridge windows
  PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area

i2c: Sanity checks on adapter registration

Make sure I2C adapters being registered have the required struct
fields set. If they don't, problems will happen later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

i2c: Mark i2c_adapter.id as deprecated

It's about time to make it clear that i2c_adapter.id is deprecated.
Hopefully this will remind the last user to move over to a different
strategy.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>

i2c: Drivers shouldn't include <linux/i2c-id.h>

Drivers don't need to include <linux/i2c-id.h>, especially not when
they don't use anything that header file provides.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Michael Hunold <michael@mihu.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>

i2c: Delete unused adapter IDs

Delete unused I2C adapter IDs. Special cases are:

* I2C_HW_B_RIVA was still set in driver rivafb, however no other
  driver is ever looking for this value, so we can safely remove it.
* I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no
  adapter ID is ever set to this value, so the code in question never
  runs. As the code additionally expects that I2C_HW_B_HDPVR may not
  be defined, we can delete it now and let the lirc_zilog driver
  maintainer rewrite this piece of code.

Big thanks for Hans Verkuil for doing all the hard work :)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>

i2c: Remove obsolete cleanup for clientdata

A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit. This is obsolete meanwhile, so fix it and hope the word will spread.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

include/linux/kernel.h: Move logging bits to include/linux/printk.h

Move the logging bits from kernel.h into printk.h so that
there is a bit more logical separation of the generic from
the printk logging specific parts.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again)

The fix in commit 6b4e81db2552 ("i8k: Tell gcc that *regs gets
clobbered") to work around the gcc miscompiling i8k.c to add "+m
(*regs)" caused register pressure problems and a build failure.

Changing the 'asm' statement to 'asm volatile' instead should prevent
that and works around the gcc bug as well, so we can remove the "+m".

[ Background on the gcc bug: a memory clobber fails to mark the function
  the asm resides in as non-pure (aka "__attribute__((const))"), so if
  the function does nothing else that triggers the non-pure logic, gcc
  will think that that function has no side effects at all. As a result,
  callers will be mis-compiled.

  Adding the "+m" made gcc see that it's not a pure function, and so
  does "asm volatile". The problem was never really the need to mark
  "*regs" as changed, since the memory clobber did that part - the
  problem was just a bug in the gcc "pure" function analysis  - Linus ]

Signed-off-by: Jim Bos <jim876@xs4all.nl>
Acked-by: Jakub Jelinek <jakub@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwmon: (w83795) Check for BEEP pin availability

On the W83795ADG, there's a single pin for BEEP and OVT#, so you
can't have both. Check the configuration and don't create beep
attributes when BEEP pin is not available.

The W83795G has a dedicated BEEP pin so the functionality is always
available there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

hwmon: (w83795) Clear intrusion alarm immediately

When asked to clear the intrusion alarm, do so immediately. We have to
invalidate the cache to make sure the new status will be read. But we
also have to read from the status register once to clear the pending
alarm, as writing to CLR_CHS surprising won't clear it automatically.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

hwmon: (w83795) Read the intrusion state properly

We can't read the intrusion state from the real-time alarm registers
as we do for all other alarm flags, because real-time alarm bits don't
stick (by definition) and the intrusion state has to stick until
explicitly cleared (otherwise it has little value.)

So we have to use the interrupt status register instead, which is read
from the same address but with a configuration bit flipped in another
register.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

hwmon: (w83795) Print the actual temperature channels as sources

Don't expose raw register values to user-space. Decode and encode
temperature channels selected as temperature sources as needed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

hwmon: (w83795) List all usable temperature sources

Temperature sources are not correlated directly with temperature
channels. A look-up table is required to find out which temperature
sources can be used depending on which temperature channels (both
analog and digital) are enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

hwmon: (w83795) Expose fan control method

Expose fan control method (DC vs. PWM) using the standard sysfs
attributes. I've made it read-only as the board should be wired for
a given mode, the BIOS should have set up the chip for this mode, and
you shouldn't have to change it. But it would be easy enough to make
it changeable if someone comes up with a use case.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

hwmon: (w83795) Fix fan control mode attributes

There were two bugs:
* Speed cruise mode was improperly reported for all fans but fan1.
* Fan control method (PWM vs. DC) was mixed with the control mode.
  It will be added back as a separate attribute, as per the standard
  sysfs interface.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

hwmon: (lm95241) Check validity of input values

This clears the following build-time warnings I was seeing:

drivers/hwmon/lm95241.c: In function "set_interval":
drivers/hwmon/lm95241.c:132:15: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max2":
drivers/hwmon/lm95241.c:278:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max1":
drivers/hwmon/lm95241.c:277:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min2":
drivers/hwmon/lm95241.c:249:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min1":
drivers/hwmon/lm95241.c:248:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type2":
drivers/hwmon/lm95241.c:220:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type1":
drivers/hwmon/lm95241.c:219:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result

This also fixes a small race in set_interval() as a side effect: by
working with a temporary local variable we prevent data->interval from
being accessed at a time it contains the interval value in the wrong
unit.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Davide Rizzo <elpa.rizzo@gmail.com>

hwmon: Change mail address of Hans J. Koch

My old mail address doesn't exist anymore. This changes all occurrences
to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

PCI: sysfs: fix printk warnings

Cast pci_resource_start() and pci_resource_len() to u64 for printk.

drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 9 has type 'resource_size_t'
drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 10 has type 'resource_size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Fix inode deallocation race

Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: Fix HAVE_S3C_RTC warnings
  ARM: SAMSUNG: Fix HAVE_S3C2410_I2C warnings
  ARM: SAMSUNG: Fix HAVE_S3C2410_WATCHDOG warnings

Merge branch 'fbdev-fixes-for-linus' of git://git./linux/kernel/git/lethal/fbdev-2.6

* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
  fsl-diu-fb: drop dead ioctl define
  MAINTAINERS: Add an fbdev git tree entry.
  OMAP: DSS: Fix documentation regarding 'vram' kernel parameter
  OMAP: VRAM: Fix boot-time memory allocation
  OMAP: VRAM: improve VRAM error prints
  sisfb: limit POST memory test according to PCI resource length
  fbdev: sh_mobile_lcdc: use correct number of modes, when using the default
  fbdev: sh_mobile_lcdc: use the standard CEA-861 720p timing
  fbdev: sh_mobile_hdmi: properly clean up modedb on monitor unplug

Merge branches 'sh-fixes-for-linus' and 'rmobile-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: intc: Fix up build failure introduced by radix tree changes.
  MAINTAINERS: update the sh git tree entry.
  sh: clkfwk: fix up compiler warnings.
  sh: intc: Fix up initializers for gcc 4.5.
  rtc: rtc-sh - fix a memory leak

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate
  MAINTAINERS: update the ARM SH-Mobile git tree entry.
  ARM: mach-shmobile: ap4evb: Mark NOR boot loader partitions read-only.
  ARM: mach-shmobile: intc-sh7372: fix interrupt number

GFS2: Fix inode deallocation race

This area of the code has always been a bit delicate due to the
subtleties of lock ordering. The problem is that for "normal"
alloc/dealloc, we always grab the inode locks first and the rgrp lock
later.

In order to ensure no races in looking up the unlinked, but still
allocated inodes, we need to hold the rgrp lock when we do the lookup,
which means that we can't take the inode glock.

The solution is to borrow the technique already used by NFS to solve
what is essentially the same problem (given an inode number, look up
the inode carefully, checking that it really is in the expected
state).

We cannot do that directly from the allocation code (lock ordering
again) so we give the job to the pre-existing delete workqueue and
carry on with the allocation as normal.

If we find there is no space, we do a journal flush (required anyway
if space from a deallocation is to be released) which should block
against the pending deallocations, so we should always get the space
back.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Merge branch 'rmobile/core' into rmobile-fixes-for-linus

ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate

Tested-by: Tony SIM <chinyeow.sim.xt@renesas.com>
Tested-by: TAKEI Mitsuharu <takei.andr@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

sh: intc: Fix up build failure introduced by radix tree changes.

The radix tree retry logic got a bit of an overhaul and subsequently
broke the virtual IRQ subgroup build. Simply switch over to
radix_tree_deref_retry() as per the filemap changes, which the virq
lookup logic was modelled after in the first place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6 into sh/urgent

fsl-diu-fb: drop dead ioctl define

The fsl-diu-fb driver no longer uses this define, and we have a common one
to cover this already (FBIO_WAITFORVSYNC).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

MAINTAINERS: Add an fbdev git tree entry.

Now that there's an fbdev git tree (this is also what is pulled in to
-next), stub it in to the MAINTAINERS entry.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: Fix slub_lock down/up imbalance

Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Change some lock status member in ocfs2_lock_res to char.

slub: Fix slub_lock down/up imbalance

There are two places, that do not release the slub_lock.

Respective bugs were introduced by sysfs changes ab4d5ed5 (slub: Enable
sysfs support for !CONFIG_SLUB_DEBUG) and 2bce6485 ( slub: Allow removal
of slab caches during boot).

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>

Merge branch 'urgent' of git://git./linux/kernel/git/brodo/pcmcia-2.6

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  drivers/pcmcia/soc_common.c: Use printf extension %pV
  pcmcia: fix warning in synclink driver
  pcmcia/sa1100: don't put machine specific init functions in .init.text
  pcmcia/cm4000: fix error code
  pd6729: Coding Style fixes

Revert "8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang"

This reverts commit 47d3904fe40d62deee8cd46e79ca784e7a548acd.

Crashes any x86 serial console bootup:

  Console: colour VGA+ 80x25
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000158
  IP: [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430
  ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: padlock - Fix AES-CBC handling on odd-block-sized input
  crypto: n2 - dubious error check

Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] soc-camera: Compile fixes for mx2-camera
  [media] SoC Camera: ov6650: minor cleanups
  [media] SOC Camera: OMAP1: typo fix
  [media] SoC Camera: OMAP1: update for recent videobuf changes
  [media] SoC Camera: OMAP1: update for recent framework changes
  [media] ARM mx3_camera: check for DMA engine type
  [media] tm6000: bugfix set tv standards
  [media] cafe_ccic: fix subdev configuration
  [media] saa7134: Fix autodetect for Behold A7 and H7 TV cards
  [media] v4l: kill the BKL
  [media] BZ#22292: dibx000_common: Restore i2c algo pointer

i8k: Tell gcc that *regs gets clobbered

More recent GCC caused the i8k driver to stop working, on Slackware
compiler was upgraded from gcc-4.4.4 to gcc-4.5.1 after which it didn't
work anymore, meaning the driver didn't load or gave total nonsensical
output.

As it turned out the asm(..) statement forgot to mention it modifies the
*regs variable.

Credits to Andi Kleen and Andreas Schwab for providing the fix.

Signed-off-by: Jim Bos <jim876@xs4all.nl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ACPI: debugfs custom_method open to non-root

Currently we have:

  --w--w--w-. 1 root root 0 2010-11-11 14:56 /sys/kernel/debug/acpi/custom_method

which is just crazy. Change this to --w-------.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@kernel.org (for 2.6.36)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: Change some lock status member in ocfs2_lock_res to char.

Commit 83fd9c7 changes l_level, l_requested and l_blocking of
ocfs2_lock_res from int to unsigned char. But actually it is
initially as -1(ocfs2_lock_res_init_common) which
correspoding to 255 for unsigned char. So the whole dlm lock
mechanism doesn't work now which means a disaster to ocfs2.

Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

ARM: SAMSUNG: Fix HAVE_S3C_RTC warnings

This patch fixes followng build warnings.
warning: (ARCH_S5P64X0 && <choice> || ARCH_S5PC100 && <choice> ||
          ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice>)
         selects HAVE_S3C_RTC which has unmet direct dependencies (RTC_CLASS)

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

ARM: SAMSUNG: Fix HAVE_S3C2410_I2C warnings

This patch fixes following warnings.
warning: (ARCH_S3C2410 && <choice> || ARCH_S3C64XX && <choice> ||
          ARCH_S5P64X0 && <choice> || ARCH_S5PC100 && <choice> ||
          ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice>)
         selects HAVE_S3C2410_I2C which has unmet direct dependencies (I2C)

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

ARM: SAMSUNG: Fix HAVE_S3C2410_WATCHDOG warnings

Fix build warnings
warning: (ARCH_S3C64XX && <choice> && WATCHDOG || ARCH_S5P64X0 && <choice> && WATCHDOG ||
          ARCH_S5P6442 && <choice> && WATCHDOG || ARCH_S5PC100 && <choice> ||
          ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice> || MACH_SMDK6410 && ARCH_S3C64XX)
         selects HAVE_S3C2410_WATCHDOG which has unmet direct dependencies (WATCHDOG)

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: Added fix same warning(mach-s3c64xx/Kconfig)]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits)
  can-bcm: fix minor heap overflow
  gianfar: Do not call device_set_wakeup_enable() under a spinlock
  ipv6: Warn users if maximum number of routes is reached.
  docs: Add neigh/gc_thresh3 and route/max_size documentation.
  axnet_cs: fix resume problem for some Ax88790 chip
  ipv6: addrconf: don't remove address state on ifdown if the address is being kept
  tcp: Don't change unlocked socket state in tcp_v4_err().
  x25: Prevent crashing when parsing bad X.25 facilities
  cxgb4vf: add call to Firmware to reset VF State.
  cxgb4vf: Fail open if link_start() fails.
  cxgb4vf: flesh out PCI Device ID Table ...
  cxgb4vf: fix some errors in Gather List to skb conversion
  cxgb4vf: fix bug in Generic Receive Offload
  cxgb4vf: don't implement trivial (and incorrect) ndo_select_queue()
  ixgbe: Look inside vlan when determining offload protocol.
  bnx2x: Look inside vlan when determining checksum proto.
  vlan: Add function to retrieve EtherType from vlan packets.
  virtio-net: init link state correctly
  ucc_geth: Fix deadlock
  ucc_geth: Do not bring the whole IF down when TX failure.
  ...

Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  drivers/ata/pata_octeon_cf.c: delete double assignment
  pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test
  libata: fix NULL sdev dereference race in atapi_qc_complete()