platform/kernel/linux-rpi.git
2 years agomptcp: netlink: process IPv6 addrs in creating listening sockets
Kishen Maloor [Thu, 10 Feb 2022 01:25:08 +0000 (17:25 -0800)]
mptcp: netlink: process IPv6 addrs in creating listening sockets

This change updates mptcp_pm_nl_create_listen_socket() to create
listening sockets bound to IPv6 addresses (where IPv6 is supported).

Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Acked-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoselftests: mptcp: add missing join check
Matthieu Baerts [Thu, 10 Feb 2022 01:25:07 +0000 (17:25 -0800)]
selftests: mptcp: add missing join check

This function also writes the name of the test with its ID, making clear
a new test has been executed.

Without that, the ADD_ADDR results from this test was appended at the
end of the previous test causing confusions. Especially when the second
test was failing, we had:

  17 signal invalid addresses     syn[ ok ] - synack[ ok ] - ack[ ok ]
                                  add[ ok ] - echo  [ ok ]
                                  add[fail] got 2 ADD_ADDR[s] expected 3

In fact, this 17th test was OK but not the 18th one.

Now we have:

  17 signal invalid addresses     syn[ ok ] - synack[ ok ] - ack[ ok ]
                                  add[ ok ] - echo  [ ok ]
  18 signal addresses race test   syn[fail] got 2 JOIN[s] syn expected 3
   - synack[fail] got 2 JOIN[s] synack expected
   - ack[fail] got 2 JOIN[s] ack expected 3
                                  add[fail] got 2 ADD_ADDR[s] expected 3

Fixes: 33c563ad28e3 ("selftests: mptcp: add_addr and echo race test")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: usb: qmi_wwan: Add support for Dell DW5829e
Slark Xiao [Wed, 9 Feb 2022 02:47:17 +0000 (10:47 +0800)]
net: usb: qmi_wwan: Add support for Dell DW5829e

Dell DW5829e same as DW5821e except the CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
Also, DW5829e includes normal and eSIM type.
Please see below test evidence:

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e6 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=413c ProdID=81e4 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5829e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoMerge branch 'vlan-QinQ-leak-fix'
David S. Miller [Wed, 9 Feb 2022 13:33:39 +0000 (13:33 +0000)]
Merge branch 'vlan-QinQ-leak-fix'

Xin Long says:

====================
vlan: fix a netdev refcnt leak for QinQ

This issue can be simply reproduced by:

  # ip link add dummy0 type dummy
  # ip link add link dummy0 name dummy0.1 type vlan id 1
  # ip link add link dummy0.1 name dummy0.1.2 type vlan id 2
  # rmmod 8021q

 unregister_netdevice: waiting for dummy0.1 to become free. Usage count = 1

So as to fix it, adjust vlan_dev_uninit() in Patch 1/1 so that it won't
be called twice for the same device, then do the fix in vlan_dev_uninit()
in Patch 2/2.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agovlan: move dev_put into vlan_dev_uninit
Xin Long [Wed, 9 Feb 2022 08:19:56 +0000 (03:19 -0500)]
vlan: move dev_put into vlan_dev_uninit

Shuang Li reported an QinQ issue by simply doing:

  # ip link add dummy0 type dummy
  # ip link add link dummy0 name dummy0.1 type vlan id 1
  # ip link add link dummy0.1 name dummy0.1.2 type vlan id 2
  # rmmod 8021q

 unregister_netdevice: waiting for dummy0.1 to become free. Usage count = 1

When rmmods 8021q, all vlan devs are deleted from their real_dev's vlan grp
and added into list_kill by unregister_vlan_dev(). dummy0.1 is unregistered
before dummy0.1.2, as it's using for_each_netdev() in __rtnl_kill_links().

When unregisters dummy0.1, dummy0.1.2 is not unregistered in the event of
NETDEV_UNREGISTER, as it's been deleted from dummy0.1's vlan grp. However,
due to dummy0.1.2 still holding dummy0.1, dummy0.1 will keep waiting in
netdev_wait_allrefs(), while dummy0.1.2 will never get unregistered and
release dummy0.1, as it delays dev_put until calling dev->priv_destructor,
vlan_dev_free().

This issue was introduced by Commit 563bcbae3ba2 ("net: vlan: fix a UAF in
vlan_dev_real_dev()"), and this patch is to fix it by moving dev_put() into
vlan_dev_uninit(), which is called after NETDEV_UNREGISTER event but before
netdev_wait_allrefs().

Fixes: 563bcbae3ba2 ("net: vlan: fix a UAF in vlan_dev_real_dev()")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agovlan: introduce vlan_dev_free_egress_priority
Xin Long [Wed, 9 Feb 2022 08:19:55 +0000 (03:19 -0500)]
vlan: introduce vlan_dev_free_egress_priority

This patch is to introduce vlan_dev_free_egress_priority() to
free egress priority for vlan dev, and keep vlan_dev_uninit()
static as .ndo_uninit. It makes the code more clear and safer
when adding new code in vlan_dev_uninit() in the future.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agoax25: fix UAF bugs of net_device caused by rebinding operation
Duoming Zhou [Wed, 9 Feb 2022 12:53:45 +0000 (20:53 +0800)]
ax25: fix UAF bugs of net_device caused by rebinding operation

The ax25_kill_by_device() will set s->ax25_dev = NULL and
call ax25_disconnect() to change states of ax25_cb and
sock, if we call ax25_bind() before ax25_kill_by_device().

However, if we call ax25_bind() again between the window of
ax25_kill_by_device() and ax25_dev_device_down(), the values
and states changed by ax25_kill_by_device() will be reassigned.

Finally, ax25_dev_device_down() will deallocate net_device.
If we dereference net_device in syscall functions such as
ax25_release(), ax25_sendmsg(), ax25_getsockopt(), ax25_getname()
and ax25_info_show(), a UAF bug will occur.

One of the possible race conditions is shown below:

      (USE)                   |      (FREE)
ax25_bind()                   |
                              |  ax25_kill_by_device()
ax25_bind()                   |
ax25_connect()                |    ...
                              |  ax25_dev_device_down()
                              |    ...
                              |    dev_put_track(dev, ...) //FREE
ax25_release()                |    ...
  ax25_send_control()         |
    alloc_skb()      //USE    |

the corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in ax25_send_control+0x43/0x210
...
Call Trace:
  ...
  ax25_send_control+0x43/0x210
  ax25_release+0x2db/0x3b0
  __sock_release+0x6d/0x120
  sock_close+0xf/0x20
  __fput+0x11f/0x420
  ...
Allocated by task 1283:
  ...
  __kasan_kmalloc+0x81/0xa0
  alloc_netdev_mqs+0x5a/0x680
  mkiss_open+0x6c/0x380
  tty_ldisc_open+0x55/0x90
  ...
Freed by task 1969:
  ...
  kfree+0xa3/0x2c0
  device_release+0x54/0xe0
  kobject_put+0xa5/0x120
  tty_ldisc_kill+0x3e/0x80
  ...

In order to fix these UAF bugs caused by rebinding operation,
this patch adds dev_hold_track() into ax25_bind() and
corresponding dev_put_track() into ax25_kill_by_device().

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agonet: dsa: fix panic when DSA master device unbinds on shutdown
Vladimir Oltean [Wed, 9 Feb 2022 12:04:33 +0000 (14:04 +0200)]
net: dsa: fix panic when DSA master device unbinds on shutdown

Rafael reports that on a system with LX2160A and Marvell DSA switches,
if a reboot occurs while the DSA master (dpaa2-eth) is up, the following
panic can be seen:

systemd-shutdown[1]: Rebooting.
Unable to handle kernel paging request at virtual address 00a0000800000041
[00a0000800000041] address between user and kernel address ranges
Internal error: Oops: 96000004 [#1] PREEMPT SMP
CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00042-g8f5585009b24 #32
pc : dsa_slave_netdevice_event+0x130/0x3e4
lr : raw_notifier_call_chain+0x50/0x6c
Call trace:
 dsa_slave_netdevice_event+0x130/0x3e4
 raw_notifier_call_chain+0x50/0x6c
 call_netdevice_notifiers_info+0x54/0xa0
 __dev_close_many+0x50/0x130
 dev_close_many+0x84/0x120
 unregister_netdevice_many+0x130/0x710
 unregister_netdevice_queue+0x8c/0xd0
 unregister_netdev+0x20/0x30
 dpaa2_eth_remove+0x68/0x190
 fsl_mc_driver_remove+0x20/0x5c
 __device_release_driver+0x21c/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x94/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_device_remove+0x24/0x40
 __fsl_mc_device_remove+0xc/0x20
 device_for_each_child+0x58/0xa0
 dprc_remove+0x90/0xb0
 fsl_mc_driver_remove+0x20/0x5c
 __device_release_driver+0x21c/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_bus_remove+0x80/0x100
 fsl_mc_bus_shutdown+0xc/0x1c
 platform_shutdown+0x20/0x30
 device_shutdown+0x154/0x330
 __do_sys_reboot+0x1cc/0x250
 __arm64_sys_reboot+0x20/0x30
 invoke_syscall.constprop.0+0x4c/0xe0
 do_el0_svc+0x4c/0x150
 el0_svc+0x24/0xb0
 el0t_64_sync_handler+0xa8/0xb0
 el0t_64_sync+0x178/0x17c

It can be seen from the stack trace that the problem is that the
deregistration of the master causes a dev_close(), which gets notified
as NETDEV_GOING_DOWN to dsa_slave_netdevice_event().
But dsa_switch_shutdown() has already run, and this has unregistered the
DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to
call dev_close_many() on those slave interfaces, leading to the problem.

The previous attempt to avoid the NETDEV_GOING_DOWN on the master after
dsa_switch_shutdown() was called seems improper. Unregistering the slave
interfaces is unnecessary and unhelpful. Instead, after the slaves have
stopped being uppers of the DSA master, we can now reset to NULL the
master->dsa_ptr pointer, which will make DSA start ignoring all future
notifier events on the master.

Fixes: 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown")
Reported-by: Rafael Richter <rafael.richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agonet: amd-xgbe: disable interrupts during pci removal
Raju Rangoju [Wed, 9 Feb 2022 04:32:01 +0000 (10:02 +0530)]
net: amd-xgbe: disable interrupts during pci removal

Hardware interrupts are enabled during the pci probe, however,
they are not disabled during pci removal.

Disable all hardware interrupts during pci removal to avoid any
issues.

Fixes: e75377404726 ("amd-xgbe: Update PCI support to use new IRQ functions")
Suggested-by: Selwin Sebastian <Selwin.Sebastian@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agotipc: rate limit warning for received illegal binding update
Jon Maloy [Wed, 9 Feb 2022 03:22:37 +0000 (22:22 -0500)]
tipc: rate limit warning for received illegal binding update

It would be easy to craft a message containing an illegal binding table
update operation. This is handled correctly by the code, but the
corresponding warning printout is not rate limited as is should be.
We fix this now.

Fixes: b97bf3fd8f6a ("[TIPC] Initial merge")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agonet: mdio: aspeed: Add missing MODULE_DEVICE_TABLE
Joel Stanley [Wed, 9 Feb 2022 00:03:59 +0000 (10:33 +1030)]
net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE

Fix loading of the driver when built as a module.

Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agoveth: fix races around rq->rx_notify_masked
Eric Dumazet [Tue, 8 Feb 2022 23:28:22 +0000 (15:28 -0800)]
veth: fix races around rq->rx_notify_masked

veth being NETIF_F_LLTX enabled, we need to be more careful
whenever we read/write rq->rx_notify_masked.

BUG: KCSAN: data-race in veth_xmit / veth_xmit

write to 0xffff888133d9a9f8 of 1 bytes by task 23552 on cpu 0:
 __veth_xdp_flush drivers/net/veth.c:269 [inline]
 veth_xmit+0x307/0x470 drivers/net/veth.c:350
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
 NF_HOOK include/linux/netfilter.h:307 [inline]
 br_forward_finish net/bridge/br_forward.c:66 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
 br_dev_xmit+0x8b6/0x960
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 neigh_hh_output include/net/neighbour.h:525 [inline]
 neigh_output include/net/neighbour.h:539 [inline]
 ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out net/ipv4/ip_output.c:126 [inline]
 ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888133d9a9f8 of 1 bytes by task 23563 on cpu 1:
 __veth_xdp_flush drivers/net/veth.c:268 [inline]
 veth_xmit+0x2d6/0x470 drivers/net/veth.c:350
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53
 NF_HOOK include/linux/netfilter.h:307 [inline]
 br_forward_finish net/bridge/br_forward.c:66 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115
 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242
 br_dev_xmit+0x8b6/0x960
 __netdev_start_xmit include/linux/netdevice.h:4683 [inline]
 netdev_start_xmit include/linux/netdevice.h:4697 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3473
 dev_hard_start_xmit net/core/dev.c:3489 [inline]
 __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149
 neigh_hh_output include/net/neighbour.h:525 [inline]
 neigh_output include/net/neighbour.h:539 [inline]
 ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228
 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430
 dst_output include/net/dst.h:451 [inline]
 ip_local_out net/ipv4/ip_output.c:126 [inline]
 ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570
 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967
 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254
 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 ____sys_sendmsg+0x39a/0x510 net/socket.c:2413
 ___sys_sendmsg net/socket.c:2467 [inline]
 __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23563 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00064-gc36c04c2e132 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 948d4f214fde ("veth: Add driver XDP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agoMerge tag 'linux-can-fixes-for-5.17-20220209' of git://git.kernel.org/pub/scm/linux...
David S. Miller [Wed, 9 Feb 2022 12:02:28 +0000 (12:02 +0000)]
Merge tag 'linux-can-fixes-for-5.17-20220209' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-02-09

this is a pull request of 2 patches for net/master.

Oliver Hartkopp contributes 2 fixes for the CAN ISOTP protocol.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agoax25: fix NPD bug in ax25_disconnect
Duoming Zhou [Tue, 8 Feb 2022 15:40:00 +0000 (23:40 +0800)]
ax25: fix NPD bug in ax25_disconnect

The ax25_disconnect() in ax25_kill_by_device() is not
protected by any locks, thus there is a race condition
between ax25_disconnect() and ax25_destroy_socket().
when ax25->sk is assigned as NULL by ax25_destroy_socket(),
a NULL pointer dereference bug will occur if site (1) or (2)
dereferences ax25->sk.

ax25_kill_by_device()                | ax25_release()
  ax25_disconnect()                  |   ax25_destroy_socket()
    ...                              |
    if(ax25->sk != NULL)             |     ...
      ...                            |     ax25->sk = NULL;
      bh_lock_sock(ax25->sk); //(1)  |     ...
      ...                            |
      bh_unlock_sock(ax25->sk); //(2)|

This patch moves ax25_disconnect() into lock_sock(), which can
synchronize with ax25_destroy_socket() in ax25_release().

Fail log:
===============================================================
BUG: kernel NULL pointer dereference, address: 0000000000000088
...
RIP: 0010:_raw_spin_lock+0x7e/0xd0
...
Call Trace:
ax25_disconnect+0xf6/0x220
ax25_device_event+0x187/0x250
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x17d/0x230
rollback_registered_many+0x1f1/0x950
unregister_netdevice_queue+0x133/0x200
unregister_netdev+0x13/0x20
...

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agoMerge branch 'net-fix-skb-unclone-issues'
David S. Miller [Wed, 9 Feb 2022 11:41:48 +0000 (11:41 +0000)]
Merge branch 'net-fix-skb-unclone-issues'

Antoine Tenart says:

====================
net: fix issues when uncloning an skb dst+metadata

This fixes two issues when uncloning an skb dst+metadata in
tun_dst_unclone; this was initially reported by Vlad Buslov[1]. Because
of the memory leak fixed by patch 2, the issue in patch 1 never happened
in practice.

tun_dst_unclone is called from two different places, one in geneve/vxlan
to handle PMTU and one in net/openvswitch/actions.c where it is used to
retrieve tunnel information. While both Vlad and I tested the former, we
could not for the latter. I did spend quite some time trying to, but
that code path is not easy to trigger. Code inspection shows this should
be fine, the tunnel information (dst+metadata) is uncloned and the skb
it is referenced from is only consumed after all accesses to the tunnel
information are done:

  do_execute_actions
    output_userspace
      dev_fill_metadata_dst         <- dst+metadata is uncloned
      ovs_dp_upcall
        queue_userspace_packet
          ovs_nla_put_tunnel_info   <- metadata (tunnel info) is accessed
    consume_skb                     <- dst+metadata is freed

Thanks!
Antoine

[1] https://lore.kernel.org/all/ygnhh79yluw2.fsf@nvidia.com/T/#m2f814614a4f5424cea66bbff7297f692b59b69a0
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agonet: fix a memleak when uncloning an skb dst and its metadata
Antoine Tenart [Mon, 7 Feb 2022 17:13:19 +0000 (18:13 +0100)]
net: fix a memleak when uncloning an skb dst and its metadata

When uncloning an skb dst and its associated metadata, a new
dst+metadata is allocated and later replaces the old one in the skb.
This is helpful to have a non-shared dst+metadata attached to a specific
skb.

The issue is the uncloned dst+metadata is initialized with a refcount of
1, which is increased to 2 before attaching it to the skb. When
tun_dst_unclone returns, the dst+metadata is only referenced from a
single place (the skb) while its refcount is 2. Its refcount will never
drop to 0 (when the skb is consumed), leading to a memory leak.

Fix this by removing the call to dst_hold in tun_dst_unclone, as the
dst+metadata refcount is already 1.

Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.")
Cc: Pravin B Shelar <pshelar@ovn.org>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agonet: do not keep the dst cache when uncloning an skb dst and its metadata
Antoine Tenart [Mon, 7 Feb 2022 17:13:18 +0000 (18:13 +0100)]
net: do not keep the dst cache when uncloning an skb dst and its metadata

When uncloning an skb dst and its associated metadata a new dst+metadata
is allocated and the tunnel information from the old metadata is copied
over there.

The issue is the tunnel metadata has references to cached dst, which are
copied along the way. When a dst+metadata refcount drops to 0 the
metadata is freed including the cached dst entries. As they are also
referenced in the initial dst+metadata, this ends up in UaFs.

In practice the above did not happen because of another issue, the
dst+metadata was never freed because its refcount never dropped to 0
(this will be fixed in a subsequent patch).

Fix this by initializing the dst cache after copying the tunnel
information from the old metadata to also unshare the dst cache.

Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agocan: isotp: fix error path in isotp_sendmsg() to unlock wait queue
Oliver Hartkopp [Wed, 9 Feb 2022 07:36:01 +0000 (08:36 +0100)]
can: isotp: fix error path in isotp_sendmsg() to unlock wait queue

Commit 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent
access in isotp_sendmsg()") introduced a new locking scheme that may render
the userspace application in a locking state when an error is detected.
This issue shows up under high load on simultaneously running isotp channels
with identical configuration which is against the ISO specification and
therefore breaks any reasonable PDU communication anyway.

Fixes: 43a08c3bdac4 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()")
Link: https://lore.kernel.org/all/20220209073601.25728-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2 years agocan: isotp: fix potential CAN frame reception race in isotp_rcv()
Oliver Hartkopp [Tue, 8 Feb 2022 20:00:26 +0000 (21:00 +0100)]
can: isotp: fix potential CAN frame reception race in isotp_rcv()

When receiving a CAN frame the current code logic does not consider
concurrently receiving processes which do not show up in real world
usage.

Ziyang Xuan writes:

The following syz problem is one of the scenarios. so->rx.len is
changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals
0 before alloc_skb() and equals 4096 after alloc_skb(). That will
trigger skb_over_panic() in skb_put().

=======================================================
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc8-syzkaller #0
RIP: 0010:skb_panic+0x16c/0x16e net/core/skbuff.c:113
Call Trace:
 <TASK>
 skb_over_panic net/core/skbuff.c:118 [inline]
 skb_put.cold+0x24/0x24 net/core/skbuff.c:1990
 isotp_rcv_cf net/can/isotp.c:570 [inline]
 isotp_rcv+0xa38/0x1e30 net/can/isotp.c:668
 deliver net/can/af_can.c:574 [inline]
 can_rcv_filter+0x445/0x8d0 net/can/af_can.c:635
 can_receive+0x31d/0x580 net/can/af_can.c:665
 can_rcv+0x120/0x1c0 net/can/af_can.c:696
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5465
 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5579

Therefore we make sure the state changes and data structures stay
consistent at CAN frame reception time by adding a spin_lock in
isotp_rcv(). This fixes the issue reported by syzkaller but does not
affect real world operation.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/linux-can/d7e69278-d741-c706-65e1-e87623d9a8e8@huawei.com/T/
Link: https://lore.kernel.org/all/20220208200026.13783-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Reported-by: syzbot+4c63f36709a642f801c5@syzkaller.appspotmail.com
Reported-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2 years agonfp: flower: fix ida_idx not being released
Louis Peens [Tue, 8 Feb 2022 10:14:53 +0000 (11:14 +0100)]
nfp: flower: fix ida_idx not being released

When looking for a global mac index the extra NFP_TUN_PRE_TUN_IDX_BIT
that gets set if nfp_flower_is_supported_bridge is true is not taken
into account. Consequently the path that should release the ida_index
in cleanup is never triggered, causing messages like:

    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
    nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.

after NFP_MAX_MAC_INDEX number of reconfigs. Ultimately this lead to
new tunnel flows not being offloaded.

Fix this by unsetting the NFP_TUN_PRE_TUN_IDX_BIT before checking if
the port is of type OTHER.

Fixes: 2e0bc7f3cb55 ("nfp: flower: encode mac indexes with pre-tunnel rule check")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220208101453.321949-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path
Eric Dumazet [Tue, 8 Feb 2022 05:34:51 +0000 (21:34 -0800)]
ipmr,ip6mr: acquire RTNL before calling ip[6]mr_free_table() on failure path

ip[6]mr_free_table() can only be called under RTNL lock.

RTNL: assertion failed at net/core/dev.c (10367)
WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Modules linked in:
CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367
Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee
RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4
R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000
FS:  00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509
 ip6mr_free_table net/ipv6/ip6mr.c:389 [inline]
 ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline]
 ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline]
 ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298
 ops_init+0xaf/0x470 net/core/net_namespace.c:140
 setup_net+0x54f/0xbb0 net/core/net_namespace.c:331
 copy_net_ns+0x318/0x760 net/core/net_namespace.c:475
 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
 copy_namespaces+0x391/0x450 kernel/nsproxy.c:178
 copy_process+0x2e0c/0x7300 kernel/fork.c:2167
 kernel_clone+0xe7/0xab0 kernel/fork.c:2555
 __do_sys_clone+0xc8/0x110 kernel/fork.c:2672
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f4ab89f9059
Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f.
RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038
RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059
RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000
RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300
R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000
R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000
 </TASK>

Fixes: f243e5a7859a ("ipmr,ip6mr: call ip6mr_free_table() on failure path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220208053451.2885398-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: ethernet: litex: Add the dependency on HAS_IOMEM
Cai Huoqing [Tue, 8 Feb 2022 01:33:08 +0000 (09:33 +0800)]
net: ethernet: litex: Add the dependency on HAS_IOMEM

The LiteX driver uses devm io function API which
needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM.

Fixes: ee7da21ac4c3 ("net: Add driver for LiteX's LiteETH network interface")
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220208013308.6563-1-cai.huoqing@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoibmvnic: don't release napi in __ibmvnic_open()
Sukadev Bhattiprolu [Tue, 8 Feb 2022 00:19:18 +0000 (16:19 -0800)]
ibmvnic: don't release napi in __ibmvnic_open()

If __ibmvnic_open() encounters an error such as when setting link state,
it calls release_resources() which frees the napi structures needlessly.
Instead, have __ibmvnic_open() only clean up the work it did so far (i.e.
disable napi and irqs) and leave the rest to the callers.

If caller of __ibmvnic_open() is ibmvnic_open(), it should release the
resources immediately. If the caller is do_reset() or do_hard_reset(),
they will release the resources on the next reset.

This fixes following crash that occurred when running the drmgr command
several times to add/remove a vnic interface:

[102056] ibmvnic 30000003 env3: Disabling rx_scrq[6] irq
[102056] ibmvnic 30000003 env3: Disabling rx_scrq[7] irq
[102056] ibmvnic 30000003 env3: Replenished 8 pools
Kernel attempted to read user page (10) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000010
Faulting instruction address: 0xc000000000a3c840
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
...
CPU: 9 PID: 102056 Comm: kworker/9:2 Kdump: loaded Not tainted 5.16.0-rc5-autotest-g6441998e2e37 #1
Workqueue: events_long __ibmvnic_reset [ibmvnic]
NIP:  c000000000a3c840 LR: c0080000029b5378 CTR: c000000000a3c820
REGS: c0000000548e37e0 TRAP: 0300   Not tainted  (5.16.0-rc5-autotest-g6441998e2e37)
MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 28248484  XER: 00000004
CFAR: c0080000029bdd24 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0
GPR00: c0080000029b55d0 c0000000548e3a80 c0000000028f0200 0000000000000000
...
NIP [c000000000a3c840] napi_enable+0x20/0xc0
LR [c0080000029b5378] __ibmvnic_open+0xf0/0x430 [ibmvnic]
Call Trace:
[c0000000548e3a80] [0000000000000006] 0x6 (unreliable)
[c0000000548e3ab0] [c0080000029b55d0] __ibmvnic_open+0x348/0x430 [ibmvnic]
[c0000000548e3b40] [c0080000029bcc28] __ibmvnic_reset+0x500/0xdf0 [ibmvnic]
[c0000000548e3c60] [c000000000176228] process_one_work+0x288/0x570
[c0000000548e3d00] [c000000000176588] worker_thread+0x78/0x660
[c0000000548e3da0] [c0000000001822f0] kthread+0x1c0/0x1d0
[c0000000548e3e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
7d2948f8 792307e0 4e800020 60000000 3c4c01eb 384239e0 f821ffd1 39430010
38a0fff6 e92d1100 f9210028 39200000 <e9030010f9010020 60420000 e9210020
---[ end trace 5f8033b08fd27706 ]---

Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220208001918.900602-1-sukadev@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoMerge branch 'more-dsa-fixes-for-devres-mdiobus_-alloc-register'
Jakub Kicinski [Wed, 9 Feb 2022 04:30:38 +0000 (20:30 -0800)]
Merge branch 'more-dsa-fixes-for-devres-mdiobus_-alloc-register'

Vladimir Oltean says:

====================
More DSA fixes for devres + mdiobus_{alloc,register}

The initial patch series "[net,0/2] Fix mdiobus users with devres"
https://patchwork.kernel.org/project/netdevbpf/cover/20210920214209.1733768-1-vladimir.oltean@nxp.com/
fixed some instances where DSA drivers on slow buses (SPI, I2C) trigger
a panic (changed since then to a warn) in mdiobus_free. That was due to
devres calling mdiobus_free() with no prior mdiobus_unregister(), which
again was due to commit ac3a68d56651 ("net: phy: don't abuse devres in
devm_mdiobus_register()") by Bartosz Golaszewski.

Rafael Richter and Daniel Klauer report yet another variation on that
theme, but this time it applies to any DSA switch driver, not just those
on buses which have a "->shutdown() calls ->remove() which unregisters
children" sequence.

Their setup is that of an LX2160A DPAA2 SoC driving a Marvell DSA switch
(MDIO). DPAA2 Ethernet drivers probe on the "fsl-mc" bus
(drivers/bus/fsl-mc/fsl-mc-bus.c). This bus is meant to be the
kernel-side representation of the networking objects kept by the
Management Complex (MC) firmware.

The fsl-mc bus driver has this pattern:

static void fsl_mc_bus_shutdown(struct platform_device *pdev)
{
fsl_mc_bus_remove(pdev);
}

which proceeds to remove the children on the bus. Among those children,
the dpaa2-eth network driver.

When dpaa2-eth is a DSA master, this removal of the master on shutdown
trips up the device link created by dsa_master_setup(), and as such, the
Marvell switch is also removed.

From this point on, readers can revisit the description of commits
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

since the prerequisites for the BUG_ON in mdiobus_free() have been
accomplished if there is a devres mismatch between mdiobus_alloc() and
mdiobus_register().

Most DSA drivers have this kind of mismatch, and upon my initial
assessment I had not realized the possibility described above, so I
didn't fix it. This patch series walks through all drivers and makes
them use either fully devres, or no devres.

I am aware that there are DSA drivers that are only known to be tested
with a single DSA master, so some patches are probably overkill for
them. But code is copy-pasted from so many sources without fully
understanding the differences, that I think it's better to not leave an
in-tree source of inspiration that may lead to subtle breakage if not
adapted properly.
====================

Link: https://lore.kernel.org/r/20220207161553.579933-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: dsa: lantiq_gswip: don't use devres for mdiobus
Vladimir Oltean [Mon, 7 Feb 2022 16:15:53 +0000 (18:15 +0200)]
net: dsa: lantiq_gswip: don't use devres for mdiobus

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The GSWIP switch is a platform device, so the initial set of constraints
that I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the GSWIP switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The gswip driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: dsa: mt7530: fix kernel bug in mdiobus_free() when unbinding
Vladimir Oltean [Mon, 7 Feb 2022 16:15:52 +0000 (18:15 +0200)]
net: dsa: mt7530: fix kernel bug in mdiobus_free() when unbinding

Nobody in this driver calls mdiobus_unregister(), which is necessary if
mdiobus_register() completes successfully. So if the devres callbacks
that free the mdiobus get invoked (this is the case when unbinding the
driver), mdiobus_free() will BUG if the mdiobus is still registered,
which it is.

My speculation is that this is due to the fact that prior to commit
ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
from June 2020, _devm_mdiobus_free() used to call mdiobus_unregister().
But at the time that the mt7530 support was introduced in May 2021, the
API was already changed. It's therefore likely that the blamed patch was
developed on an older tree, and incorrectly adapted to net-next. This
makes the Fixes: tag correct.

Fix the problem by using the devres variant of mdiobus_register.

Fixes: ba751e28d442 ("net: dsa: mt7530: add interrupt support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: dsa: seville: register the mdiobus under devres
Vladimir Oltean [Mon, 7 Feb 2022 16:15:51 +0000 (18:15 +0200)]
net: dsa: seville: register the mdiobus under devres

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Seville VSC9959 switch is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the seville switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The seville driver has a code structure that could accommodate both the
mdiobus_unregister and mdiobus_free calls, but it has an external
dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls
devm_mdiobus_alloc_size() on its behalf. So rather than restructuring
that, and exporting yet one more symbol mscc_miim_teardown(), let's work
with devres and replace of_mdiobus_register with the devres variant.
When we use all-devres, we can ensure that devres doesn't free a
still-registered bus (it either runs both callbacks, or none).

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: dsa: felix: don't use devres for mdiobus
Vladimir Oltean [Mon, 7 Feb 2022 16:15:50 +0000 (18:15 +0200)]
net: dsa: felix: don't use devres for mdiobus

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Felix VSC9959 switch is a PCI device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the felix switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The felix driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc_size() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: dsa: bcm_sf2: don't use devres for mdiobus
Vladimir Oltean [Mon, 7 Feb 2022 16:15:49 +0000 (18:15 +0200)]
net: dsa: bcm_sf2: don't use devres for mdiobus

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The Starfighter 2 is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the bcm_sf2 switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The bcm_sf2 driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: dsa: ar9331: register the mdiobus under devres
Vladimir Oltean [Mon, 7 Feb 2022 16:15:48 +0000 (18:15 +0200)]
net: dsa: ar9331: register the mdiobus under devres

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The ar9331 is an MDIO device, so the initial set of constraints that I
thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the ar9331 switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The ar9331 driver doesn't have a complex code structure for mdiobus
removal, so just replace of_mdiobus_register with the devres variant in
order to be all-devres and ensure that we don't free a still-registered
bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: dsa: mv88e6xxx: don't use devres for mdiobus
Vladimir Oltean [Mon, 7 Feb 2022 16:15:47 +0000 (18:15 +0200)]
net: dsa: mv88e6xxx: don't use devres for mdiobus

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The mv88e6xxx is an MDIO device, so the initial set of constraints that
I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the Marvell switch driver on shutdown.

systemd-shutdown[1]: Powering off.
mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down
fsl-mc dpbp.9: Removing from iommu group 7
fsl-mc dpbp.8: Removing from iommu group 7
------------[ cut here ]------------
kernel BUG at drivers/net/phy/mdio_bus.c:677!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15
pc : mdiobus_free+0x44/0x50
lr : devm_mdiobus_free+0x10/0x20
Call trace:
 mdiobus_free+0x44/0x50
 devm_mdiobus_free+0x10/0x20
 devres_release_all+0xa0/0x100
 __device_release_driver+0x190/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x4c/0x220
 device_release_driver_internal+0xac/0xb0
 device_links_unbind_consumers+0xd4/0x100
 __device_release_driver+0x94/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_device_remove+0x24/0x40
 __fsl_mc_device_remove+0xc/0x20
 device_for_each_child+0x58/0xa0
 dprc_remove+0x90/0xb0
 fsl_mc_driver_remove+0x20/0x5c
 __device_release_driver+0x21c/0x220
 device_release_driver+0x28/0x40
 bus_remove_device+0x118/0x124
 device_del+0x174/0x420
 fsl_mc_bus_remove+0x80/0x100
 fsl_mc_bus_shutdown+0xc/0x1c
 platform_shutdown+0x20/0x30
 device_shutdown+0x154/0x330
 kernel_power_off+0x34/0x6c
 __do_sys_reboot+0x15c/0x250
 __arm64_sys_reboot+0x20/0x30
 invoke_syscall.constprop.0+0x4c/0xe0
 do_el0_svc+0x4c/0x150
 el0_svc+0x24/0xb0
 el0t_64_sync_handler+0xa8/0xb0
 el0t_64_sync+0x178/0x17c

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The Marvell driver already has a good structure for mdiobus removal, so
just plug in mdiobus_free and get rid of devres.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Reported-by: Rafael Richter <Rafael.Richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Daniel Klauer <daniel.klauer@gin.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agobonding: pair enable_port with slave_arr_updates
Mahesh Bandewar [Mon, 7 Feb 2022 22:29:01 +0000 (14:29 -0800)]
bonding: pair enable_port with slave_arr_updates

When 803.2ad mode enables a participating port, it should update
the slave-array. I have observed that the member links are participating
and are part of the active aggregator while the traffic is egressing via
only one member link (in a case where two links are participating). Via
kprobes I discovered that slave-arr has only one link added while
the other participating link wasn't part of the slave-arr.

I couldn't see what caused that situation but the simple code-walk
through provided me hints that the enable_port wasn't always associated
with the slave-array update.

Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agogve: Recording rx queue before sending to napi
Tao Liu [Mon, 7 Feb 2022 17:59:01 +0000 (09:59 -0800)]
gve: Recording rx queue before sending to napi

This caused a significant performance degredation when using generic XDP
with multiple queues.

Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support")
Signed-off-by: Tao Liu <xliutaox@google.com>
Link: https://lore.kernel.org/r/20220207175901.2486596-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs
Pavel Parkhomenko [Sat, 5 Feb 2022 20:39:32 +0000 (23:39 +0300)]
net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs

It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.

Cc: stable@vger.kernel.org
Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet/smc: use GFP_ATOMIC allocation in smc_pnet_add_eth()
Eric Dumazet [Sun, 6 Feb 2022 14:33:48 +0000 (06:33 -0800)]
net/smc: use GFP_ATOMIC allocation in smc_pnet_add_eth()

My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().

I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:

BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256

Fixes: 28f922213886 ("net/smc: fix ref_tracker issue in smc_pnet_add()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agonet/smc: fix ref_tracker issue in smc_pnet_add()
Eric Dumazet [Sun, 6 Feb 2022 05:05:16 +0000 (21:05 -0800)]
net/smc: fix ref_tracker issue in smc_pnet_add()

I added the netdev_tracker_alloc() right after ndev was
stored into the newly allocated object:

  new_pe->ndev = ndev;
  if (ndev)
      netdev_tracker_alloc(ndev, &new_pe->dev_tracker, GFP_KERNEL);

But I missed that later, we could end up freeing new_pe,
then calling dev_put(ndev) to release the reference on ndev.

The new_pe->dev_tracker would not be freed.

To solve this issue, move the netdev_tracker_alloc() call to
the point we know for sure new_pe will be kept.

syzbot report (on net-next tree, but the bug is present in net tree)
WARNING: CPU: 0 PID: 6019 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 6019 Comm: syz-executor.3 Not tainted 5.17.0-rc2-syzkaller-00650-g5a8fb33e5305 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d f4 70 a0 09 31 ff 89 de e8 4d bc 99 fd 84 db 75 e0 e8 64 b8 99 fd 48 c7 c7 20 0c 06 8a c6 05 d4 70 a0 09 01 e8 9e 4e 28 05 <0f> 0b eb c4 e8 48 b8 99 fd 0f b6 1d c3 70 a0 09 31 ff 89 de e8 18
RSP: 0018:ffffc900043b7400 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815fb318 RDI: fffff52000876e72
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f507e R11: 0000000000000000 R12: 1ffff92000876e85
R13: 0000000000000000 R14: ffff88805c1c6600 R15: 0000000000000000
FS:  00007f1ef6feb700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2d02b000 CR3: 00000000223f4000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __refcount_dec include/linux/refcount.h:344 [inline]
 refcount_dec include/linux/refcount.h:359 [inline]
 ref_tracker_free+0x53f/0x6c0 lib/ref_tracker.c:119
 netdev_tracker_free include/linux/netdevice.h:3867 [inline]
 dev_put_track include/linux/netdevice.h:3884 [inline]
 dev_put_track include/linux/netdevice.h:3880 [inline]
 dev_put include/linux/netdevice.h:3910 [inline]
 smc_pnet_add_eth net/smc/smc_pnet.c:399 [inline]
 smc_pnet_enter net/smc/smc_pnet.c:493 [inline]
 smc_pnet_add+0x5fc/0x15f0 net/smc/smc_pnet.c:556
 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731
 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
 genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: b60645248af3 ("net/smc: add net device tracker to struct smc_pnetentry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agonet: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs
Pavel Parkhomenko [Sat, 5 Feb 2022 21:49:51 +0000 (00:49 +0300)]
net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs

When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.

Fixes: 605f196efbf8 ("phy: Add support for Marvell 88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agonet: mscc: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP
Vladimir Oltean [Fri, 4 Feb 2022 23:03:21 +0000 (01:03 +0200)]
net: mscc: ocelot: fix all IP traffic getting trapped to CPU with PTP over IP

The filters for the PTP trap keys are incorrectly configured, in the
sense that is2_entry_set() only looks at trap->key.ipv4.dport or
trap->key.ipv6.dport if trap->key.ipv4.proto or trap->key.ipv6.proto is
set to IPPROTO_TCP or IPPROTO_UDP.

But we don't do that, so is2_entry_set() goes through the "else" branch
of the IP protocol check, and ends up installing a rule for "Any IP
protocol match" (because msk is also 0). The UDP port is ignored.

This means that when we run "ptp4l -i swp0 -4", all IP traffic is
trapped to the CPU, which hinders bridging.

Fix this by specifying the IP protocol in the VCAP IS2 filters for PTP
over UDP.

Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agotcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case
Eric Dumazet [Thu, 3 Feb 2022 22:55:47 +0000 (14:55 -0800)]
tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case

syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY)
calls over the same TCP socket would again trigger the
infamous warning in inet_sock_destruct()

WARN_ON(sk_forward_alloc_get(sk));

While Talal took into account a mix of regular copied data
and MSG_ZEROCOPY one in the same skb, the sendpage() path
has been forgotten.

We want the charging to happen for sendpage(), because
pages could be coming from a pipe. What is missing is the
downgrading of pure zerocopy status to make sure
sk_forward_alloc will stay synced.

Add tcp_downgrade_zcopy_pure() helper so that we can
use it from the two callers.

Fixes: 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20220203225547.665114-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Jakub Kicinski [Fri, 4 Feb 2022 16:47:41 +0000 (08:47 -0800)]
Merge git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Don't refresh timeout for SCTP flows in CLOSED state.

2) Don't allow access to transport header if fragment offset is set on.

3) Reinitialize internal conntrack state for retransmitted TCP
   syn-ack packet.

4) Update MAINTAINER file to add the Netfilter group tree. Moving
   forward, Florian Westphal has access to this tree so he can also
   send pull requests.

5) Set on IPS_HELPER for entries created via ctnetlink, otherwise NAT
   might zap it.

All patches from Florian Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: ctnetlink: disable helper autoassign
  MAINTAINERS: netfilter: update git links
  netfilter: conntrack: re-init state for retransmitted syn-ack
  netfilter: conntrack: move synack init code to helper
  netfilter: nft_payload: don't allow th access for fragments
  netfilter: conntrack: don't refresh sctp entries in closed state
====================

Link: https://lore.kernel.org/r/20220204151903.320786-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoixgbevf: Require large buffers for build_skb on 82599VF
Samuel Mendoza-Jonas [Thu, 3 Feb 2022 22:49:16 +0000 (14:49 -0800)]
ixgbevf: Require large buffers for build_skb on 82599VF

From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb
around new data in the page buffer shared with the ixgbe PF.
This uses either a 2K or 3K buffer, and offsets the DMA mapping by
NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to
ensure the PF does not write a full 2K bytes into the buffer, which is
actually 2K minus the offset.

However on the 82599 virtual function, the RXDCTL mechanism is not
available. The driver attempts to work around this by using the SET_LPE
mailbox method to lower the maximm frame size, but the ixgbe PF driver
ignores this in order to keep the PF and all VFs in sync[0].

This means the PF will write up to the full 2K set in SRRCTL, causing it
to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer.
With 4K pages split into two buffers, this means it either writes
NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the
second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA
mapping.

Avoid this by only enabling build_skb when using "large" buffers (3K).
These are placed in each half of an order-1 page, preventing the PF from
writing past the end of the mapping.

[0]: Technically it only ever raises the max frame size, see
ixgbe_set_vf_lpe() in ixgbe_sriov.c

Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agonetfilter: ctnetlink: disable helper autoassign
Florian Westphal [Wed, 2 Feb 2022 11:00:56 +0000 (12:00 +0100)]
netfilter: ctnetlink: disable helper autoassign

When userspace, e.g. conntrackd, inserts an entry with a specified helper,
its possible that the helper is lost immediately after its added:

ctnetlink_create_conntrack
  -> nf_ct_helper_ext_add + assign helper
    -> ctnetlink_setup_nat
      -> ctnetlink_parse_nat_setup
         -> parse_nat_setup -> nfnetlink_parse_nat_setup
                       -> nf_nat_setup_info
                                 -> nf_conntrack_alter_reply
                                   -> __nf_ct_try_assign_helper

... and __nf_ct_try_assign_helper will zero the helper again.

Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like
when helper is assigned via ruleset.

Dropped old 'not strictly necessary' comment, it referred to use of
rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER().

NB: Fixes tag intentionally incorrect, this extends the referenced commit,
but this change won't build without IPS_HELPER introduced there.

Fixes: 6714cf5465d280 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT")
Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2 years agoMAINTAINERS: netfilter: update git links
Florian Westphal [Sat, 29 Jan 2022 17:30:18 +0000 (18:30 +0100)]
MAINTAINERS: netfilter: update git links

nf and nf-next have a new location.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2 years agonetfilter: conntrack: re-init state for retransmitted syn-ack
Florian Westphal [Sat, 29 Jan 2022 16:47:01 +0000 (17:47 +0100)]
netfilter: conntrack: re-init state for retransmitted syn-ack

TCP conntrack assumes that a syn-ack retransmit is identical to the
previous syn-ack.  This isn't correct and causes stuck 3whs in some more
esoteric scenarios.  tcpdump to illustrate the problem:

 client > server: Flags [S] seq 1365731894, win 29200, [mss 1460,sackOK,TS val 2083035583 ecr 0,wscale 7]
 server > client: Flags [S.] seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215367629 ecr 2082921663]

Note the invalid/outdated synack ack number.
Conntrack marks this syn-ack as out-of-window/invalid, but it did
initialize the reply direction parameters based on this packets content.

 client > server: Flags [S] seq 1365731894, win 29200, [mss 1460,sackOK,TS val 2083036623 ecr 0,wscale 7]

... retransmit...

 server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215368644 ecr 2082921663]

and another bogus synack. This repeats, then client re-uses for a new
attempt:

client > server: Flags [S], seq 2375731741, win 29200, [mss 1460,sackOK,TS val 2083100223 ecr 0,wscale 7]
server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215430754 ecr 2082921663]

... but still gets a invalid syn-ack.

This repeats until:

 server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215437785 ecr 2082921663]
 server > client: Flags [R.], seq 145824454, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215443451 ecr 2082921663]
 client > server: Flags [S], seq 2375731741, win 29200, [mss 1460,sackOK,TS val 2083115583 ecr 0,wscale 7]
 server > client: Flags [S.], seq 162602410, ack 2375731742, win 65535, [mss 8952,wscale 5,TS val 3215445754 ecr 2083115583]

This syn-ack has the correct ack number, but conntrack flags it as
invalid: The internal state was created from the first syn-ack seen
so the sequence number of the syn-ack is treated as being outside of
the announced window.

Don't assume that retransmitted syn-ack is identical to previous one.
Treat it like the first syn-ack and reinit state.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2 years agonetfilter: conntrack: move synack init code to helper
Florian Westphal [Sat, 29 Jan 2022 16:47:00 +0000 (17:47 +0100)]
netfilter: conntrack: move synack init code to helper

It seems more readable to use a common helper in the followup fix rather
than copypaste or goto.

No functional change intended.  The function is only called for syn-ack
or syn in repy direction in case of simultaneous open.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2 years agonetfilter: nft_payload: don't allow th access for fragments
Florian Westphal [Sat, 29 Jan 2022 16:13:23 +0000 (17:13 +0100)]
netfilter: nft_payload: don't allow th access for fragments

Loads relative to ->thoff naturally expect that this points to the
transport header, but this is only true if pkt->fragoff == 0.

This has little effect for rulesets with connection tracking/nat because
these enable ip defra. For other rulesets this prevents false matches.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2 years agonetfilter: conntrack: don't refresh sctp entries in closed state
Florian Westphal [Fri, 28 Jan 2022 12:13:32 +0000 (13:13 +0100)]
netfilter: conntrack: don't refresh sctp entries in closed state

Vivek Thrivikraman reported:
 An SCTP server application which is accessed continuously by client
 application.
 When the session disconnects the client retries to establish a connection.
 After restart of SCTP server application the session is not established
 because of stale conntrack entry with connection state CLOSED as below.

 (removing this entry manually established new connection):

 sctp 9 CLOSED src=10.141.189.233 [..]  [ASSURED]

Just skip timeout update of closed entries, we don't want them to
stay around forever.

Reported-and-tested-by: Vivek Thrivikraman <vivek.thrivikraman@est.tech>
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2 years agonet: sparx5: Fix get_stat64 crash in tcpdump
Steen Hegelund [Thu, 3 Feb 2022 10:29:00 +0000 (11:29 +0100)]
net: sparx5: Fix get_stat64 crash in tcpdump

This problem was found with Sparx5 when the tcpdump tool requests the
do_get_stats64 (sparx5_get_stats64) statistic.

The portstats pointer was incorrectly incremented when fetching priority
based statistics.

Fixes: af4b11022e2d (net: sparx5: add ethtool configuration and statistics support)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220203102900.528987-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agogcc-plugins/stackleak: Use noinstr in favor of notrace
Kees Cook [Thu, 3 Feb 2022 20:17:54 +0000 (12:17 -0800)]
gcc-plugins/stackleak: Use noinstr in favor of notrace

While the stackleak plugin was already using notrace, objtool is now a
bit more picky.  Update the notrace uses to noinstr.  Silences the
following objtool warnings when building with:

CONFIG_DEBUG_ENTRY=y
CONFIG_STACK_VALIDATION=y
CONFIG_VMLINUX_VALIDATION=y
CONFIG_GCC_PLUGIN_STACKLEAK=y

  vmlinux.o: warning: objtool: do_syscall_64()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: do_int80_syscall_32()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: exc_general_protection()+0x22: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: fixup_bad_iret()+0x20: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: do_machine_check()+0x27: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .text+0x5346e: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x143: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x10eb: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x17f9: call to stackleak_erase() leaves .noinstr.text section

Note that the plugin's addition of calls to stackleak_track_stack() from
noinstr functions is expected to be safe, as it isn't runtime
instrumentation and is self-contained.

Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoMerge tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Linus Torvalds [Fri, 4 Feb 2022 00:54:18 +0000 (16:54 -0800)]
Merge tag 'net-5.17-rc3' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, netfilter, and ieee802154.

  Current release - regressions:

   - Partially revert "net/smc: Add netlink net namespace support", fix
     uABI breakage

   - netfilter:
      - nft_ct: fix use after free when attaching zone template
      - nft_byteorder: track register operations

  Previous releases - regressions:

   - ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

   - phy: qca8081: fix speeds lower than 2.5Gb/s

   - sched: fix use-after-free in tc_new_tfilter()

  Previous releases - always broken:

   - tcp: fix mem under-charging with zerocopy sendmsg()

   - tcp: add missing tcp_skb_can_collapse() test in
     tcp_shift_skb_data()

   - neigh: do not trigger immediate probes on NUD_FAILED from
     neigh_managed_work, avoid a deadlock

   - bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
     false-positives

   - netfilter: nft_reject_bridge: fix for missing reply from prerouting

   - smc: forward wakeup to smc socket waitqueue after fallback

   - ieee802154:
      - return meaningful error codes from the netlink helpers
      - mcr20a: fix lifs/sifs periods
      - at86rf230, ca8210: stop leaking skbs on error paths

   - macsec: add missing un-offload call for NETDEV_UNREGISTER of parent

   - ax25: add refcount in ax25_dev to avoid UAF bugs

   - eth: mlx5e:
      - fix SFP module EEPROM query
      - fix broken SKB allocation in HW-GRO
      - IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows

   - eth: amd-xgbe:
      - fix skb data length underflow
      - ensure reset of the tx_timer_active flag, avoid Tx timeouts

   - eth: stmmac: fix runtime pm use in stmmac_dvr_remove()

   - eth: e1000e: handshake with CSME starts from Alder Lake platforms"

* tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  ax25: fix reference count leaks of ax25_dev
  net: stmmac: ensure PTP time register reads are consistent
  net: ipa: request IPA register values be retained
  dt-bindings: net: qcom,ipa: add optional qcom,qmp property
  tools/resolve_btfids: Do not print any commands when building silently
  bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
  net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
  tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
  net: sparx5: do not refer to skb after passing it on
  Partially revert "net/smc: Add netlink net namespace support"
  net/mlx5e: Avoid field-overflowing memcpy()
  net/mlx5e: Use struct_group() for memcpy() region
  net/mlx5e: Avoid implicit modify hdr for decap drop rule
  net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
  net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
  net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
  net/mlx5: E-Switch, Fix uninitialized variable modact
  net/mlx5e: Fix handling of wrong devices during bond netevent
  net/mlx5e: Fix broken SKB allocation in HW-GRO
  net/mlx5e: Fix wrong calculation of header index in HW_GRO
  ...

2 years agoMerge tag 'selinux-pr-20220203' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 4 Feb 2022 00:44:12 +0000 (16:44 -0800)]
Merge tag 'selinux-pr-20220203' of git://git./linux/kernel/git/pcmoore/selinux

Pull selinux fix from Paul Moore:
 "One small SELinux patch to ensure that a policy structure field is
  properly reset after freeing so that we don't inadvertently do a
  double-free on certain error conditions"

* tag 'selinux-pr-20220203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix double free of cond_list on error paths

2 years agoMerge tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Fri, 4 Feb 2022 00:36:26 +0000 (16:36 -0800)]
Merge tag 'linux-kselftest-fixes-5.17-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "Important fixes to several tests and documentation clarification on
  running mainline kselftest on stable releases. A few notable fixes:

   - fix kselftest run hang due to child processes that haven't been
     terminated. Fix signals all child processes

   - fix false pass/fail results from vdso_test_abi, openat2, mincore

   - build failures when using -j (multiple jobs) option

   - exec test build failure due to incorrect build rule for a run-time
     created "pipe"

   - zram test fixes related to interaction with zram-generator to make
     sure zram test to coordinate deleted with zram-generator

   - zram test compression ratio calculation fix and skipping
     max_comp_streams.

   - increasing rtc test timeout

   - cpufreq test to write test results to stdout which will necessary
     on automated test systems"

* tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftest: Fix vdso_test_abi return status
  selftests: skip mincore.check_file_mmap when fs lacks needed support
  selftests: openat2: Skip testcases that fail with EOPNOTSUPP
  selftests: openat2: Add missing dependency in Makefile
  selftests: openat2: Print also errno in failure messages
  selftests: futex: Use variable MAKE instead of make
  selftests/exec: Remove pipe from TEST_GEN_FILES
  selftests/zram: Adapt the situation that /dev/zram0 is being used
  selftests/zram01.sh: Fix compression ratio calculation
  selftests/zram: Skip max_comp_streams interface on newer kernel
  docs/kselftest: clarify running mainline tests on stables
  kselftest: signal all child processes
  selftests: cpufreq: Write test output to stdout as well
  selftests: rtc: Increase test timeout so that all tests run

2 years agoax25: fix reference count leaks of ax25_dev
Duoming Zhou [Thu, 3 Feb 2022 15:08:11 +0000 (23:08 +0800)]
ax25: fix reference count leaks of ax25_dev

The previous commit d01ffb9eee4a ("ax25: add refcount in ax25_dev
to avoid UAF bugs") introduces refcount into ax25_dev, but there
are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(),
ax25_rt_add(), ax25_rt_del() and ax25_rt_opt().

This patch uses ax25_dev_put() and adjusts the position of
ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev.

Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220203150811.42256-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: stmmac: ensure PTP time register reads are consistent
Yannick Vignon [Thu, 3 Feb 2022 16:00:25 +0000 (17:00 +0100)]
net: stmmac: ensure PTP time register reads are consistent

Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.

Add logic to ensure the "seconds" and "nanoseconds" values are consistent.

Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoMerge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Jakub Kicinski [Thu, 3 Feb 2022 21:42:38 +0000 (13:42 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2022-02-03

We've added 6 non-merge commits during the last 10 day(s) which contain
a total of 7 files changed, 11 insertions(+), 236 deletions(-).

The main changes are:

1) Fix BPF ringbuf to allocate its area with VM_MAP instead of VM_ALLOC
   flag which otherwise trips over KASAN, from Hou Tao.

2) Fix unresolved symbol warning in resolve_btfids due to LSM callback
   rename, from Alexei Starovoitov.

3) Fix a possible race in inc_misses_counter() when IRQ would trigger
   during counter update, from He Fengqing.

4) Fix tooling infra for cross-building with clang upon probing whether
   gcc provides the standard libraries, from Jean-Philippe Brucker.

5) Fix silent mode build for resolve_btfids, from Nathan Chancellor.

6) Drop unneeded and outdated lirc.h header copy from tooling infra as
   BPF does not require it anymore, from Sean Young.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  tools/resolve_btfids: Do not print any commands when building silently
  bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
  tools: Ignore errors from `which' when searching a GCC toolchain
  tools headers UAPI: remove stale lirc.h
  bpf: Fix possible race in inc_misses_counter
  bpf: Fix renaming task_getsecid_subj->current_getsecid_subj.
====================

Link: https://lore.kernel.org/r/20220203155815.25689-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoprintk: Fix incorrect __user type in proc_dointvec_minmax_sysadmin()
Mickaël Salaün [Thu, 3 Feb 2022 14:50:29 +0000 (15:50 +0100)]
printk: Fix incorrect __user type in proc_dointvec_minmax_sysadmin()

The move of proc_dointvec_minmax_sysadmin() from kernel/sysctl.c to
kernel/printk/sysctl.c introduced an incorrect __user attribute to the
buffer argument.  I spotted this change in [1] as well as the kernel
test robot.  Revert this change to please sparse:

  kernel/printk/sysctl.c:20:51: warning: incorrect type in argument 3 (different address spaces)
  kernel/printk/sysctl.c:20:51:    expected void *
  kernel/printk/sysctl.c:20:51:    got void [noderef] __user *buffer

Fixes: faaa357a55e0 ("printk: move printk sysctl to printk/sysctl.c")
Link: https://lore.kernel.org/r/20220104155024.48023-2-mic@digikod.net
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220203145029.272640-1-mic@digikod.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoRevert "module, async: async_synchronize_full() on module init iff async is used"
Igor Pylypiv [Thu, 27 Jan 2022 23:39:53 +0000 (15:39 -0800)]
Revert "module, async: async_synchronize_full() on module init iff async is used"

This reverts commit 774a1221e862b343388347bac9b318767336b20b.

We need to finish all async code before the module init sequence is
done.  In the reverted commit the PF_USED_ASYNC flag was added to mark a
thread that called async_schedule().  Then the PF_USED_ASYNC flag was
used to determine whether or not async_synchronize_full() needs to be
invoked.  This works when modprobe thread is calling async_schedule(),
but it does not work if module dispatches init code to a worker thread
which then calls async_schedule().

For example, PCI driver probing is invoked from a worker thread based on
a node where device is attached:

if (cpu < nr_cpu_ids)
error = work_on_cpu(cpu, local_pci_probe, &ddi);
else
error = local_pci_probe(&ddi);

We end up in a situation where a worker thread gets the PF_USED_ASYNC
flag set instead of the modprobe thread.  As a result,
async_synchronize_full() is not invoked and modprobe completes without
waiting for the async code to finish.

The issue was discovered while loading the pm80xx driver:
(scsi_mod.scan=async)

modprobe pm80xx                      worker
...
  do_init_module()
  ...
    pci_call_probe()
      work_on_cpu(local_pci_probe)
                                     local_pci_probe()
                                       pm8001_pci_probe()
                                         scsi_scan_host()
                                           async_schedule()
                                           worker->flags |= PF_USED_ASYNC;
                                     ...
      < return from worker >
  ...
  if (current->flags & PF_USED_ASYNC) <--- false
   async_synchronize_full();

Commit 21c3c5d28007 ("block: don't request module during elevator init")
fixed the deadlock issue which the reverted commit 774a1221e862
("module, async: async_synchronize_full() on module init iff async is
used") tried to fix.

Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous
request_module() from async workers") synchronous module loading from
async is not allowed.

Given that the original deadlock issue is fixed and it is no longer
allowed to call synchronous request_module() from async we can remove
PF_USED_ASYNC flag to make module init consistently invoke
async_synchronize_full() unless async module probe is requested.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoMerge branch 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Thu, 3 Feb 2022 16:15:13 +0000 (08:15 -0800)]
Merge branch 'for-5.17-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fixes from Tejun Heo:

 - Eric's fix for a long standing cgroup1 permission issue where it only
   checks for uid 0 instead of CAP which inadvertently allows
   unprivileged userns roots to modify release_agent userhelper

 - Fixes for the fallout from Waiman's recent cpuset work

* 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning
  cgroup-v1: Require capabilities to set release_agent
  cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask()
  cgroup/cpuset: Make child cpusets restrict parents on v1 hierarchy

2 years agoMerge branch 'net-ipa-enable-register-retention'
Jakub Kicinski [Thu, 3 Feb 2022 16:04:15 +0000 (08:04 -0800)]
Merge branch 'net-ipa-enable-register-retention'

Alex Elder says:

====================
net: ipa: enable register retention

With runtime power management in place, we sometimes need to issue
a command to enable retention of IPA register values before power
collapse.  This requires a new Device Tree property, whose presence
will also be used to signal that the command is required.
====================

Link: https://lore.kernel.org/r/20220201150205.468403-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: ipa: request IPA register values be retained
Alex Elder [Tue, 1 Feb 2022 15:02:05 +0000 (09:02 -0600)]
net: ipa: request IPA register values be retained

In some cases, the IPA hardware needs to request the always-on
subsystem (AOSS) to coordinate with the IPA microcontroller to
retain IPA register values at power collapse.  This is done by
issuing a QMP request to the AOSS microcontroller.  A similar
request ondoes that request.

We must get and hold the "QMP" handle early, because we might get
back EPROBE_DEFER for that.  But the actual request should be sent
while we know the IPA clock is active, and when we know the
microcontroller is operational.

Fixes: 1aac309d3207 ("net: ipa: use autosuspend")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agodt-bindings: net: qcom,ipa: add optional qcom,qmp property
Alex Elder [Tue, 1 Feb 2022 15:02:04 +0000 (09:02 -0600)]
dt-bindings: net: qcom,ipa: add optional qcom,qmp property

For some systems, the IPA driver must make a request to ensure that
its registers are retained across power collapse of the IPA hardware.
On such systems, we'll use the existence of the "qcom,qmp" property
as a signal that this request is required.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agocgroup/cpuset: Fix "suspicious RCU usage" lockdep warning
Waiman Long [Thu, 3 Feb 2022 03:31:03 +0000 (22:31 -0500)]
cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning

It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks().  It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.

Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.

Fixes: 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus")
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2 years agotools/resolve_btfids: Do not print any commands when building silently
Nathan Chancellor [Tue, 1 Feb 2022 21:25:04 +0000 (14:25 -0700)]
tools/resolve_btfids: Do not print any commands when building silently

When building with 'make -s', there is some output from resolve_btfids:

$ make -sj"$(nproc)" oldconfig prepare
  MKDIR     .../tools/bpf/resolve_btfids/libbpf/
  MKDIR     .../tools/bpf/resolve_btfids//libsubcmd
  LINK     resolve_btfids

Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.

Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org
2 years agoRevert "mm/gup: small refactoring: simplify try_grab_page()"
John Hubbard [Wed, 2 Feb 2022 03:23:17 +0000 (19:23 -0800)]
Revert "mm/gup: small refactoring: simplify try_grab_page()"

This reverts commit 54d516b1d62ff8f17cee2da06e5e4706a0d00b8a

That commit did a refactoring that effectively combined fast and slow
gup paths (again).  And that was again incorrect, for two reasons:

 a) Fast gup and slow gup get reference counts on pages in different
    ways and with different goals: see Linus' writeup in commit
    cd1adf1b63a1 ("Revert "mm/gup: remove try_get_page(), call
    try_get_compound_head() directly""), and

 b) try_grab_compound_head() also has a specific check for
    "FOLL_LONGTERM && !is_pinned(page)", that assumes that the caller
    can fall back to slow gup. This resulted in new failures, as
    recently report by Will McVicker [1].

But (a) has problems too, even though they may not have been reported
yet.  So just revert this.

Link: https://lore.kernel.org/r/20220131203504.3458775-1-willmcvicker@google.com
Fixes: 54d516b1d62f ("mm/gup: small refactoring: simplify try_grab_page()")
Reported-and-tested-by: Will McVicker <willmcvicker@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Minchan Kim <minchan@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2 years agoMerge tag 'mips-fixes-5.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips...
Linus Torvalds [Thu, 3 Feb 2022 14:45:34 +0000 (06:45 -0800)]
Merge tag 'mips-fixes-5.17_2' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix missed change for PTR->PTR_WD conversion

 - kernel-doc fixes

* tag 'mips-fixes-5.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: KVM: fix vz.c kernel-doc notation
  MIPS: octeon: Fix missed PTR->PTR_WD conversion

2 years agobpf: Use VM_MAP instead of VM_ALLOC for ringbuf
Hou Tao [Wed, 2 Feb 2022 06:01:58 +0000 (14:01 +0800)]
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf

After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mappings will be marked as accessible
in __get_vm_area_node() when KASAN is enabled. But now the flag for
ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access
after vmap() returns. Because the ringbuf area is created by mapping
allocated pages, so use VM_MAP instead.

After the change, info in /proc/vmallocinfo also changes from
  [start]-[end]   24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
  [start]-[end]   24576 ringbuf_map_alloc+0x171/0x290 vmap user

Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com
2 years agonet, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
Daniel Borkmann [Tue, 1 Feb 2022 19:39:42 +0000 (20:39 +0100)]
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work

syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]:

  kworker/0:16/14617 is trying to acquire lock:
  ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
  [...]
  but task is already holding lock:
  ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572

The neighbor entry turned to NUD_FAILED state, where __neigh_event_send()
triggered an immediate probe as per commit cd28ca0a3dd1 ("neigh: reduce
arp latency") via neigh_probe() given table lock was held.

One option to fix this situation is to defer the neigh_probe() back to
the neigh_timer_handler() similarly as pre cd28ca0a3dd1. For the case
of NTF_MANAGED, this deferral is acceptable given this only happens on
actual failure state and regular / expected state is NUD_VALID with the
entry already present.

The fix adds a parameter to __neigh_event_send() in order to communicate
whether immediate probe is allowed or disallowed. Existing call-sites
of neigh_event_send() default as-is to immediate probe. However, the
neigh_managed_work() disables it via use of neigh_event_send_probe().

[0] <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
  print_deadlock_bug kernel/locking/lockdep.c:2956 [inline]
  check_deadlock kernel/locking/lockdep.c:2999 [inline]
  validate_chain kernel/locking/lockdep.c:3788 [inline]
  __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027
  lock_acquire kernel/locking/lockdep.c:5639 [inline]
  lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604
  __raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline]
  _raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334
  ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
  ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123
  __ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
  __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
  ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
  NF_HOOK_COND include/linux/netfilter.h:296 [inline]
  ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
  dst_output include/net/dst.h:451 [inline]
  NF_HOOK include/linux/netfilter.h:307 [inline]
  ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508
  ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650
  ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742
  neigh_probe+0xc2/0x110 net/core/neighbour.c:1040
  __neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201
  neigh_event_send include/net/neighbour.h:470 [inline]
  neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574
  process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
  worker_thread+0x657/0x1110 kernel/workqueue.c:2454
  kthread+0x2e9/0x3a0 kernel/kthread.c:377
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
  </TASK>

Fixes: 7482e3841d52 ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries")
Reported-by: syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Tested-by: syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220201193942.5055-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agotcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
Eric Dumazet [Tue, 1 Feb 2022 18:46:40 +0000 (10:46 -0800)]
tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()

tcp_shift_skb_data() might collapse three packets into a larger one.

P_A, P_B, P_C  -> P_ABC

Historically, it used a single tcp_skb_can_collapse_to(P_A) call,
because it was enough.

In commit 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions"),
this call was replaced by a call to tcp_skb_can_collapse(P_A, P_B)

But the now needed test over P_C has been missed.

This probably broke MPTCP.

Then later, commit 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
added an extra condition to tcp_skb_can_collapse(), but the missing call
from tcp_shift_skb_data() is also breaking TCP zerocopy, because P_A and P_C
might have different skb_zcopy_pure() status.

Fixes: 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions")
Fixes: 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220201184640.756716-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoMerge tag 'nfsd-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Linus Torvalds [Wed, 2 Feb 2022 18:14:31 +0000 (10:14 -0800)]
Merge tag 'nfsd-5.17-1' of git://git./linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:
 "Notable bug fixes:

   - Ensure SM_NOTIFY doesn't crash the NFS server host

   - Ensure NLM locks are cleaned up after client reboot

   - Fix a leak of internal NFSv4 lease information"

* tag 'nfsd-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.
  lockd: fix failure to cleanup client locks
  lockd: fix server crash on reboot of client holding lock

2 years agoMerge tag 'fsnotify_for_v5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 2 Feb 2022 18:08:52 +0000 (10:08 -0800)]
Merge tag 'fsnotify_for_v5.17-rc3' of git://git./linux/kernel/git/jack/linux-fs

Pull fanotify fix from Jan Kara:
 "Fix stale file descriptor in copy_event_to_user"

* tag 'fsnotify_for_v5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: Fix stale file descriptor in copy_event_to_user()

2 years agoMerge tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm...
Linus Torvalds [Wed, 2 Feb 2022 18:00:08 +0000 (10:00 -0800)]
Merge tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
 "A single fix to an error seen on qemu due to a missing import"

* tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: Import missing importlib.abc

2 years agoMerge tag 'pinctrl-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Wed, 2 Feb 2022 17:50:17 +0000 (09:50 -0800)]
Merge tag 'pinctrl-v5.17-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Most interesting and urgent is the Intel stuff affecting Chromebooks
  and laptops.

   - Fix up group name building on the Intel Thunderbay

   - Fix interrupt problems on the Intel Cherryview

   - Fix some pin data on the Sunxi H616

   - Fix up the CONFIG_PINCTRL_ST Kconfig sort order as noted during the
     merge window

   - Fix an unexpected interrupt problem on the Intel Sunrisepoint

   - Fix a glitch when updating IRQ flags on all Intel pin controllers

   - Revert a Zynqmp patch to unify the pin naming, let's find some
     better solution

   - Fix some error paths in the Broadcom BCM2835 driver

   - Fix a Kconfig problem pertaining to the BCM63XX drivers

   - Fix the regmap support in the Microchip SGPIO driver"

* tag 'pinctrl-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: microchip-sgpio: Fix support for regmap
  pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP
  pinctrl: bcm2835: Fix a few error paths
  pinctrl: zynqmp: Revert "Unify pin naming"
  pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line
  pinctrl: intel: fix unexpected interrupt
  pinctrl: Place correctly CONFIG_PINCTRL_ST in the Makefile
  pinctrl: sunxi: Fix H616 I2S3 pin data
  pinctrl: cherryview: Trigger hwirq0 for interrupt-lines without a mapping
  pinctrl: thunderbay: rework loops looking for groups names
  pinctrl: thunderbay: comment process of building functions a bit

2 years agonet: sparx5: do not refer to skb after passing it on
Steen Hegelund [Wed, 2 Feb 2022 08:30:39 +0000 (09:30 +0100)]
net: sparx5: do not refer to skb after passing it on

Do not try to use any SKB fields after the packet has been passed up in the
receive stack.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220202083039.3774851-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoselinux: fix double free of cond_list on error paths
Vratislav Bendel [Wed, 2 Feb 2022 11:25:11 +0000 (12:25 +0100)]
selinux: fix double free of cond_list on error paths

On error path from cond_read_list() and duplicate_policydb_cond_list()
the cond_list_destroy() gets called a second time in caller functions,
resulting in NULL pointer deref.  Fix this by resetting the
cond_list_len to 0 in cond_list_destroy(), making subsequent calls a
noop.

Also consistently reset the cond_list pointer to NULL after freeing.

Cc: stable@vger.kernel.org
Signed-off-by: Vratislav Bendel <vbendel@redhat.com>
[PM: fix line lengths in the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2 years agoPartially revert "net/smc: Add netlink net namespace support"
Dmitry V. Levin [Wed, 2 Feb 2022 03:09:04 +0000 (06:09 +0300)]
Partially revert "net/smc: Add netlink net namespace support"

The change of sizeof(struct smc_diag_linkinfo) by commit 79d39fc503b4
("net/smc: Add netlink net namespace support") introduced an ABI
regression: since struct smc_diag_lgrinfo contains an object of
type "struct smc_diag_linkinfo", offset of all subsequent members
of struct smc_diag_lgrinfo was changed by that change.

As result, applications compiled with the old version
of struct smc_diag_linkinfo will receive garbage in
struct smc_diag_lgrinfo.role if the kernel implements
this new version of struct smc_diag_linkinfo.

Fix this regression by reverting the part of commit 79d39fc503b4 that
changes struct smc_diag_linkinfo.  After all, there is SMC_GEN_NETLINK
interface which is good enough, so there is probably no need to touch
the smc_diag ABI in the first place.

Fixes: 79d39fc503b4 ("net/smc: Add netlink net namespace support")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220202030904.GA9742@altlinux.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoMerge tag 'mlx5-fixes-2022-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git...
David S. Miller [Wed, 2 Feb 2022 14:19:38 +0000 (14:19 +0000)]
Merge tag 'mlx5-fixes-2022-02-01' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2022-02-01

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.

Sorry about the long series, but I had to move the top two patches from
net-next to net to help avoiding a build break when kspp branch is merged
into linus-next on next merge window.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2 years agoMerge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Jakub Kicinski [Wed, 2 Feb 2022 05:03:15 +0000 (21:03 -0800)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-02-01

This series contains updates to e1000e driver only.

Sasha removes CSME handshake with TGL platform as this is not supported
and is causing hardware unit hangs to be reported.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  e1000e: Handshake with CSME starts from ADL platforms
  e1000e: Separate ADP board type from TGP
====================

Link: https://lore.kernel.org/r/20220201173754.580305-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet/mlx5e: Avoid field-overflowing memcpy()
Kees Cook [Mon, 24 Jan 2022 17:20:28 +0000 (09:20 -0800)]
net/mlx5e: Avoid field-overflowing memcpy()

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.

Use flexible arrays instead of zero-element arrays (which look like they
are always overflowing) and split the cross-field memcpy() into two halves
that can be appropriately bounds-checked by the compiler.

We were doing:

#define ETH_HLEN  14
#define VLAN_HLEN  4
...
#define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN)
...
        struct mlx5e_tx_wqe      *wqe  = mlx5_wq_cyc_get_wqe(wq, pi);
...
        struct mlx5_wqe_eth_seg  *eseg = &wqe->eth;
        struct mlx5_wqe_data_seg *dseg = wqe->data;
...
memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE);

target is wqe->eth.inline_hdr.start (which the compiler sees as being
2 bytes in size), but copying 18, intending to write across start
(really vlan_tci, 2 bytes). The remaining 16 bytes get written into
wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr
(8 bytes).

struct mlx5e_tx_wqe {
        struct mlx5_wqe_ctrl_seg   ctrl;                 /*     0    16 */
        struct mlx5_wqe_eth_seg    eth;                  /*    16    16 */
        struct mlx5_wqe_data_seg   data[];               /*    32     0 */

        /* size: 32, cachelines: 1, members: 3 */
        /* last cacheline: 32 bytes */
};

struct mlx5_wqe_eth_seg {
        u8                         swp_outer_l4_offset;  /*     0     1 */
        u8                         swp_outer_l3_offset;  /*     1     1 */
        u8                         swp_inner_l4_offset;  /*     2     1 */
        u8                         swp_inner_l3_offset;  /*     3     1 */
        u8                         cs_flags;             /*     4     1 */
        u8                         swp_flags;            /*     5     1 */
        __be16                     mss;                  /*     6     2 */
        __be32                     flow_table_metadata;  /*     8     4 */
        union {
                struct {
                        __be16     sz;                   /*    12     2 */
                        u8         start[2];             /*    14     2 */
                } inline_hdr;                            /*    12     4 */
                struct {
                        __be16     type;                 /*    12     2 */
                        __be16     vlan_tci;             /*    14     2 */
                } insert;                                /*    12     4 */
                __be32             trailer;              /*    12     4 */
        };                                               /*    12     4 */

        /* size: 16, cachelines: 1, members: 9 */
        /* last cacheline: 16 bytes */
};

struct mlx5_wqe_data_seg {
        __be32                     byte_count;           /*     0     4 */
        __be32                     lkey;                 /*     4     4 */
        __be64                     addr;                 /*     8     8 */

        /* size: 16, cachelines: 1, members: 3 */
        /* last cacheline: 16 bytes */
};

So, split the memcpy() so the compiler can reason about the buffer
sizes.

"pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe
nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object
code changes (i.e. only source line number induced differences and
optimizations).

Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: Use struct_group() for memcpy() region
Kees Cook [Mon, 24 Jan 2022 17:22:41 +0000 (09:22 -0800)]
net/mlx5e: Use struct_group() for memcpy() region

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.

Use struct_group() in struct vlan_ethhdr around members h_dest and
h_source, so they can be referenced together. This will allow memcpy()
and sizeof() to more easily reason about sizes, improve readability,
and avoid future warnings about writing beyond the end of h_dest.

"pahole" shows no size nor member offset changes to struct vlan_ethhdr.
"objdump -d" shows no object code changes.

Fixes: 34802a42b352 ("net/mlx5e: Do not modify the TX SKB")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: Avoid implicit modify hdr for decap drop rule
Roi Dayan [Tue, 1 Feb 2022 13:27:48 +0000 (15:27 +0200)]
net/mlx5e: Avoid implicit modify hdr for decap drop rule

Currently the driver adds implicit modify hdr action for
decap rules on tunnel devices if the port is an ovs port.
This is also done if the action is drop and makes the modify
hdr redundant and also the FW doesn't support it and will generate
a syndrome.

kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)

Fix it by adding the implicit modify hdr only for fwd actions.

Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device")
Fixes: 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
Raed Salem [Thu, 2 Dec 2021 15:49:01 +0000 (17:49 +0200)]
net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic

IPsec Tunnel mode crypto offload software parser (SWP) setting in data
path currently always set the inner L4 offset regardless of the
encapsulated L4 header type and whether it exists in the first place,
this breaks non TCP/UDP traffic as such.

Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4
header protocol is TCP/UDP.

While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP
flag to address the case where the ip header protocol is IPv6.

Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
Raed Salem [Thu, 2 Dec 2021 15:43:50 +0000 (17:43 +0200)]
net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic

IPsec crypto offload always set the ethernet segment checksum flags with
the inner L4 header checksum flag enabled for encapsulated IPsec offloaded
packet regardless of the encapsulated L4 header type, and even if it
doesn't exists in the first place, this breaks non TCP/UDP traffic as
such.

Set the inner L4 checksum flag only when the encapsulated L4 header
protocol is TCP/UDP using software parser swp_inner_l4_offset field as
indication.

Fixes: 5cfb540ef27b ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: Don't treat small ceil values as unlimited in HTB offload
Maxim Mikityanskiy [Tue, 18 Jan 2022 11:31:54 +0000 (13:31 +0200)]
net/mlx5e: Don't treat small ceil values as unlimited in HTB offload

The hardware spec defines max_average_bw == 0 as "unlimited bandwidth".
max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become
0 when ceil is small, leading to an undesired effect of having no
bandwidth limit.

This commit fixes it by rounding up small values of ceil to 1 Mbit/s.

Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5: E-Switch, Fix uninitialized variable modact
Maor Dickman [Sun, 30 Jan 2022 14:00:41 +0000 (16:00 +0200)]
net/mlx5: E-Switch, Fix uninitialized variable modact

The variable modact is not initialized before used in command
modify header allocation which can cause command to fail.

Fix by initializing modact with zeros.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: Fix handling of wrong devices during bond netevent
Maor Dickman [Thu, 13 Jan 2022 13:11:42 +0000 (15:11 +0200)]
net/mlx5e: Fix handling of wrong devices during bond netevent

Current implementation of bond netevent handler only check if
the handled netdev is VF representor and it missing a check if
the VF representor is on the same phys device of the bond handling
the netevent.

Fix by adding the missing check and optimizing the check if
the netdev is VF representor so it will not access uninitialized
private data and crashes.

BUG: kernel NULL pointer dereference, address: 000000000000036c
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
Workqueue: eth3bond0 bond_mii_monitor [bonding]
RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core]
RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000
RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880
RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008
R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10
R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core]
 mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core]
 mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core]
 raw_notifier_call_chain+0x41/0x60
 call_netdevice_notifiers_info+0x34/0x80
 netdev_lower_state_changed+0x4e/0xa0
 bond_mii_monitor+0x56b/0x640 [bonding]
 process_one_work+0x1b9/0x390
 worker_thread+0x4d/0x3d0
 ? rescuer_thread+0x350/0x350
 kthread+0x124/0x150
 ? set_kthread_struct+0x40/0x40
 ret_from_fork+0x1f/0x30

Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: Fix broken SKB allocation in HW-GRO
Khalid Manaa [Wed, 26 Jan 2022 12:25:55 +0000 (14:25 +0200)]
net/mlx5e: Fix broken SKB allocation in HW-GRO

In case the HW doesn't perform header-data split, it will write the whole
packet into the data buffer in the WQ, in this case the SHAMPO CQE handler
couldn't use the header entry to build the SKB, instead it should allocate
a new memory to build the SKB using the function:
mlx5e_skb_from_cqe_mpwrq_nonlinear.

Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support")
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: Fix wrong calculation of header index in HW_GRO
Khalid Manaa [Wed, 26 Jan 2022 12:14:58 +0000 (14:14 +0200)]
net/mlx5e: Fix wrong calculation of header index in HW_GRO

The HW doesn't wrap the CQE.shampo.header_index field according to the
headers buffer size, instead it always increases it until reaching overflow
of u16 size.

Thus the mlx5e_handle_rx_cqe_mpwrq_shampo handler should mask the
CQE header_index field to find the actual header index in the headers buffer.

Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support")
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5: Bridge, Fix devlink deadlock on net namespace deletion
Roi Dayan [Mon, 24 Jan 2022 11:56:26 +0000 (13:56 +0200)]
net/mlx5: Bridge, Fix devlink deadlock on net namespace deletion

When changing mode to switchdev, rep bridge init registered to netdevice
notifier holds the devlink lock and then takes pernet_ops_rwsem.
At that time deleting a netns holds pernet_ops_rwsem and then takes
the devlink lock.

Example sequence is:
$ ip netns add foo
$ devlink dev eswitch set pci/0000:00:08.0 mode switchdev &
$ ip netns del foo

deleting netns trace:

[ 1185.365555]  ? devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.368331]  ? mutex_lock_io_nested+0x13f0/0x13f0
[ 1185.370984]  ? xt_find_table+0x40/0x100
[ 1185.373244]  ? __mutex_lock+0x24a/0x15a0
[ 1185.375494]  ? net_generic+0xa0/0x1c0
[ 1185.376844]  ? wait_for_completion_io+0x280/0x280
[ 1185.377767]  ? devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.378686]  devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.379579]  ? devlink_nl_cmd_get_dumpit+0x3a0/0x3a0
[ 1185.380557]  ? xt_find_table+0xda/0x100
[ 1185.381367]  cleanup_net+0x372/0x8e0

changing mode to switchdev trace:

[ 1185.411267]  down_write+0x13a/0x150
[ 1185.412029]  ? down_write_killable+0x180/0x180
[ 1185.413005]  register_netdevice_notifier+0x1e/0x210
[ 1185.414000]  mlx5e_rep_bridge_init+0x181/0x360 [mlx5_core]
[ 1185.415243]  mlx5e_uplink_rep_enable+0x269/0x480 [mlx5_core]
[ 1185.416464]  ? mlx5e_uplink_rep_disable+0x210/0x210 [mlx5_core]
[ 1185.417749]  mlx5e_attach_netdev+0x232/0x400 [mlx5_core]
[ 1185.418906]  mlx5e_netdev_attach_profile+0x15b/0x1e0 [mlx5_core]
[ 1185.420172]  mlx5e_netdev_change_profile+0x15a/0x1d0 [mlx5_core]
[ 1185.421459]  mlx5e_vport_rep_load+0x557/0x780 [mlx5_core]
[ 1185.422624]  ? mlx5e_stats_grp_vport_rep_num_stats+0x10/0x10 [mlx5_core]
[ 1185.424006]  mlx5_esw_offloads_rep_load+0xdb/0x190 [mlx5_core]
[ 1185.425277]  esw_offloads_enable+0xd74/0x14a0 [mlx5_core]

Fix this by registering rep bridges for per net netdev notifier
instead of global one, which operats on the net namespace without holding
the pernet_ops_rwsem.

Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
Dima Chumak [Mon, 17 Jan 2022 13:32:16 +0000 (15:32 +0200)]
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE

Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.

Fixes: d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: TC, Reject rules with forward and drop actions
Roi Dayan [Mon, 17 Jan 2022 13:00:30 +0000 (15:00 +0200)]
net/mlx5e: TC, Reject rules with forward and drop actions

Such rules are redundant but allowed and passed to the driver.
The driver does not support offloading such rules so return an error.

Fixes: 03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5: Use del_timer_sync in fw reset flow of halting poll
Maher Sanalla [Thu, 13 Jan 2022 13:48:48 +0000 (15:48 +0200)]
net/mlx5: Use del_timer_sync in fw reset flow of halting poll

Substitute del_timer() with del_timer_sync() in fw reset polling
deactivation flow, in order to prevent a race condition which occurs
when del_timer() is called and timer is deactivated while another
process is handling the timer interrupt. A situation that led to
the following call trace:
RIP: 0010:run_timer_softirq+0x137/0x420
<IRQ>
recalibrate_cpu_khz+0x10/0x10
ktime_get+0x3e/0xa0
? sched_clock_cpu+0xb/0xc0
__do_softirq+0xf5/0x2ea
irq_exit_rcu+0xc1/0xf0
sysvec_apic_timer_interrupt+0x9e/0xc0
asm_sysvec_apic_timer_interrupt+0x12/0x20
</IRQ>

Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: Fix module EEPROM query
Gal Pressman [Sun, 16 Jan 2022 07:07:22 +0000 (09:07 +0200)]
net/mlx5e: Fix module EEPROM query

When querying the module EEPROM, there was a misusage of the 'offset'
variable vs the 'query.offset' field.
Fix that by always using 'offset' and assigning its value to
'query.offset' right before the mcia register read call.

While at it, the cross-pages read size adjustment was changed to be more
intuitive.

Fixes: e19b0a3474ab ("net/mlx5: Refactor module EEPROM query")
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5e: TC, Reject rules with drop and modify hdr action
Roi Dayan [Tue, 4 Jan 2022 08:38:02 +0000 (10:38 +0200)]
net/mlx5e: TC, Reject rules with drop and modify hdr action

This kind of action is not supported by firmware and generates a
syndrome.

kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)

Fixes: d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5: Bridge, ensure dev_name is null-terminated
Vlad Buslov [Thu, 6 Jan 2022 16:45:26 +0000 (18:45 +0200)]
net/mlx5: Bridge, ensure dev_name is null-terminated

Even though net_device->name is guaranteed to be null-terminated string of
size<=IFNAMSIZ, the test robot complains that return value of netdev_name()
can be larger:

In file included from include/trace/define_trace.h:102,
                    from drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:113,
                    from drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:12:
   drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h: In function 'trace_event_raw_event_mlx5_esw_bridge_fdb_template':
>> drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:24:29: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation]
      24 |                             strncpy(__entry->dev_name,
         |                             ^~~~~~~~~~~~~~~~~~~~~~~~~~
      25 |                                     netdev_name(fdb->dev),
         |                                     ~~~~~~~~~~~~~~~~~~~~~~
      26 |                                     IFNAMSIZ);
         |                                     ~~~~~~~~~

This is caused by the fact that default value of IFNAMSIZ is 16, while
placeholder value that is returned by netdev_name() for unnamed net devices
is larger than that.

The offending code is in a tracing function that is only called for mlx5
representors, so there is no straightforward way to reproduce the issue but
let's fix it for correctness sake by replacing strncpy() with strscpy() to
ensure that resulting string is always null-terminated.

Fixes: 9724fd5d9c2a ("net/mlx5: Bridge, add tracepoints")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agonet/mlx5: Bridge, take rtnl lock in init error handler
Vlad Buslov [Thu, 6 Jan 2022 14:40:18 +0000 (16:40 +0200)]
net/mlx5: Bridge, take rtnl lock in init error handler

The mlx5_esw_bridge_cleanup() is expected to be called with rtnl lock
taken, which is true for mlx5e_rep_bridge_cleanup() function but not for
error handling code in mlx5e_rep_bridge_init(). Add missing rtnl
lock/unlock calls and extend both mlx5_esw_bridge_cleanup() and its dual
function mlx5_esw_bridge_init() with ASSERT_RTNL() to verify the invariant
from now on.

Fixes: 7cd6a54a8285 ("net/mlx5: Bridge, handle FDB events")
Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2 years agoMerge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Jakub Kicinski [Wed, 2 Feb 2022 04:39:46 +0000 (20:39 -0800)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-01-31

This series contains updates to i40e driver only.

Jedrzej fixes a condition check which would cause an error when
resetting bandwidth when DCB is active with one TC.

Karen resolves a null pointer dereference that could occur when removing
the driver while VSI rings are being disabled.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Fix reset path while removing the driver
  i40e: Fix reset bw limit when DCB enabled with 1 TC
====================

Link: https://lore.kernel.org/r/20220201000522.505909-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agonet: macsec: Verify that send_sci is on when setting Tx sci explicitly
Lior Nahmanson [Sun, 30 Jan 2022 11:37:52 +0000 (13:37 +0200)]
net: macsec: Verify that send_sci is on when setting Tx sci explicitly

When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.

Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
Georgi Valkov [Tue, 1 Feb 2022 07:16:18 +0000 (08:16 +0100)]
ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

When rx_buf is allocated we need to account for IPHETH_IP_ALIGN,
which reduces the usable size by 2 bytes. Otherwise we have 1512
bytes usable instead of 1514, and if we receive more than 1512
bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW,
after which the driver malfunctiones and all communication stops.

Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75

Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14")
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/
Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agotcp: fix mem under-charging with zerocopy sendmsg()
Eric Dumazet [Tue, 1 Feb 2022 06:52:54 +0000 (22:52 -0800)]
tcp: fix mem under-charging with zerocopy sendmsg()

We got reports of following warning in inet_sock_destruct()

WARN_ON(sk_forward_alloc_get(sk));

Whenever we add a non zero-copy fragment to a pure zerocopy skb,
we have to anticipate that whole skb->truesize will be uncharged
when skb is finally freed.

skb->data_len is the payload length. But the memory truesize
estimated by __zerocopy_sg_from_iter() is page aligned.

Fixes: 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20220201065254.680532-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2 years agoaf_packet: fix data-race in packet_setsockopt / packet_setsockopt
Eric Dumazet [Tue, 1 Feb 2022 02:23:58 +0000 (18:23 -0800)]
af_packet: fix data-race in packet_setsockopt / packet_setsockopt

When packet_setsockopt( PACKET_FANOUT_DATA ) reads po->fanout,
no lock is held, meaning that another thread can change po->fanout.

Given that po->fanout can only be set once during the socket lifetime
(it is only cleared from fanout_release()), we can use
READ_ONCE()/WRITE_ONCE() to document the race.

BUG: KCSAN: data-race in packet_setsockopt / packet_setsockopt

write to 0xffff88813ae8e300 of 8 bytes by task 14653 on cpu 0:
 fanout_add net/packet/af_packet.c:1791 [inline]
 packet_setsockopt+0x22fe/0x24a0 net/packet/af_packet.c:3931
 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88813ae8e300 of 8 bytes by task 14654 on cpu 1:
 packet_setsockopt+0x691/0x24a0 net/packet/af_packet.c:3935
 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000000000000000 -> 0xffff888106f8c000

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 14654 Comm: syz-executor.3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 47dceb8ecdc1 ("packet: add classic BPF fanout mode")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220201022358.330621-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>