drm/vc4: hdmi: Enable power domain before setting minimum

On the RaspberryPi0-3, the HSM clock was provided by the clk-bcm2835
driver, but on the Pi4 it was provided by the firmware through the
clk-raspberrypi driver.

The clk-bcm2835 driver registers the HSM clock using the
CLK_SET_RATE_GATE flag that prevents any modification to the rate while
the clock is active.

This meant that we needed to call clk_set_min_rate() before our call to
pm_runtime_resume_and_get() since our runtime_resume implementation
needs to enable the HSM clock for the HDMI controller registers to be
functional.

However, the HSM clock is part of the HDMI power domain which might not
be powered prior to the pm_runtime_resume_and_get() call, so we could
end up changing the rate of the HSM clock while its power domain was
disabled.

We recently changed the backing driver for the RaspberryPi0-3 to
clk-raspberrypi though, which doesn't have such restrictions. We can
thus move the clk_set_min_rate() after our call to runtime_resume and
avoid the access while the power domain is disabled.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230126-rpi-display-fw-clk-cleanup-v1-2-d646ff6fb842@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Replace hardcoded value by define

The 120MHz value hardcoded in the call to max_t to compute the HSM rate
is defined in the driver as HSM_MIN_CLOCK_FREQ, let's switch to it so
that it's more readable.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230126-rpi-display-fw-clk-cleanup-v1-1-d646ff6fb842@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/nouveau/led: explicitly include linux/leds.h

Instead of relying on an accidental, transitive inclusion of linux/leds.h
use it directly.

Also drop the forware definition of struct led_classdev that is now
provided by linux/leds.h.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215-power_supply-leds-nouveau-v1-1-ea93bfa0ba7e@weissschuh.net

drm/vmwgfx: Do not drop the reference to the handle too soon

v3: Fix vmw_user_bo_lookup which was also dropping the gem reference
before the kernel was done with buffer depending on userspace doing
the right thing. Same bug, different spot.

It is possible for userspace to predict the next buffer handle and
to destroy the buffer while it's still used by the kernel. Delay
dropping the internal reference on the buffers until kernel is done
with them.

Instead of immediately dropping the gem reference in vmw_user_bo_lookup
and vmw_gem_object_create_with_handle let the callers decide when they're
ready give the control back to userspace.

Also fixes the second usage of vmw_gem_object_create_with_handle in
vmwgfx_surface.c which wasn't grabbing an explicit reference
to the gem object which could have been destroyed by the userspace
on the owning surface at any point.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230211050514.2431155-1-zack@kde.org

drm/vmwgfx: Stop accessing buffer objects which failed init

ttm_bo_init_reserved on failure puts the buffer object back which
causes it to be deleted, but kfree was still being called on the same
buffer in vmw_bo_create leading to a double free.

After the double free the vmw_gem_object_create_with_handle was
setting the gem function objects before checking the return status
of vmw_bo_create leading to null pointer access.

Fix the entire path by relaying on ttm_bo_init_reserved to delete the
buffer objects on failure and making sure the return status is checked
before setting the gem function objects on the buffer object.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208180050.2093426-1-zack@kde.org

drm/vmwgfx: Make the driver work without the dummy resources

In commit 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
ttm stopped allocating dummy resources but vmwgfx was never ported to
handle it. Make the driver treat null resources as initial creation and
port code to handle null resources in general.

Fixes kernel oops'es on boot with vmwgfx.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230210023437.2214816-1-zack@kde.org

drm/vmwgfx: Stop using raw ttm_buffer_object's

Various bits of the driver used raw ttm_buffer_object instead of the
driver specific vmw_bo object. All those places used to duplicate
the mapped bo caching policy of vmw_bo.

Instead of duplicating all of that code and special casing various
functions to work both with vmw_bo and raw ttm_buffer_object's unify
the buffer object handling code.

As part of that work fix the naming of bo's, e.g. insted of generic
backup use 'guest_memory' because that's what it really is.

All of it makes the driver easier to maintain and the code easier to
read. Saves 100+ loc as well.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-9-zack@kde.org

drm/vmwgfx: Abstract placement selection

Problem with explicit placement selection in vmwgfx is that by the time
the buffer object needs to be validated the information about which
placement was supposed to be used is lost. To workaround this the driver
had a bunch of state in various places e.g. as_mob or cpu_blit to
somehow convey the information on which placement was intended.

Fix it properly by allowing the buffer objects to hold their preferred
placement so it can be reused whenever needed. This makes the entire
validation pipeline a lot easier both to understand and maintain.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-8-zack@kde.org

drm/vmwgfx: Rename dummy to is_iomem

Rename dummy to is_iomem because that's what it is even if we're not
activelly using it. Makes the code easier to read.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-7-zack@kde.org

drm/vmwgfx: Cleanup the vmw bo usage in the cursor paths

Base mapped count is useless because the ttm unmap functions handle
null maps just fine so completely remove all the code related to it.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-6-zack@kde.org

drm/vmwgfx: Simplify fb pinning

Only the legacy display unit requires pinning of the fb memory in vram.
Both the screen objects and screen targets can present from any buffer.
That makes the pinning abstraction pointless. Simplify all of the code
and move it to the legacy display unit, the only place that needs it.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-5-zack@kde.org

drm/vmwgfx: Rename vmw_buffer_object to vmw_bo

The rest of the drivers which are using ttm have mostly standardized on
driver_prefix_bo as the name for subclasses of the TTM buffer object.
Make vmwgfx match the rest of the drivers and follow the same naming
semantics.

This is especially clear given that the name of the file in which the
object was defined is vmw_bo.c.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-4-zack@kde.org

drm/vmwgfx: Remove the duplicate bo_free function

Remove the explicit bo_free parameter which was switching between
vmw_bo_bo_free and vmw_gem_destroy which had exactly the same
implementation.

It makes no sense to keep parameter which is always the same, remove it
and all code referencing it. Instead use the vmw_bo_bo_free directly.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-3-zack@kde.org

drm/vmwgfx: Use the common gem mmap instead of the custom code

Before vmwgfx supported gem it needed to implement the entire mmap logic
explicitly. With GEM support that's not needed and the generic code
can be used by simply setting the vm_ops to vmwgfx specific ones on the
gem object itself.

Removes a lot of code from vmwgfx without any functional difference.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-2-zack@kde.org

drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()

Other functions touching shmem->sgt take the pages lock, so do that here
too. drm_gem_shmem_get_pages() & co take the same lock, so move to the
_locked() variants to avoid recursive locking.

Discovered while auditing locking to write the Rust abstractions.

Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects")
Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net

drm/vgem: add missing mutex_destroy

vgem_fence_open() instantiates a mutex for a particular fence
instance, but never destroys it by calling mutex_destroy() in
vgem_fence_close().

So, add the missing mutex_destroy() to guarantee proper resource
destruction.

Fixes: 407779848445 ("drm/vgem: Attach sw fences to exported vGEM dma-buf (ioctl)")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202125517.427976-1-mcanal@igalia.com

drm: remove dumb_destroy callback

Not used by any driver any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126102814.8722-2-christian.koenig@amd.com

drm/amdgpu: Remove TTM resource->start visible VRAM condition v2

Use amdgpu_bo_in_cpu_visible_vram() instead.

v2 (chk): fix test inversion

Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208090106.9659-2-Amaranath.Somalapuram@amd.com

drm/bridge: panel: Set orientation on panel_bridge connector

Commit 15b9ca1641f0 ("drm: Config orientation property if panel provides
it") added a helper to set the panel orientation early but only
connected this for drm_bridge_connector, which constructs a panel bridge
with DRM_BRIDGE_ATTACH_NO_CONNECTOR and creates the connector itself.

When the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is not specified and the
panel_bridge creates its own connector the orientation is not set unless
the panel does it in .get_modes which is too late and leads to a warning
splat from __drm_mode_object_add() because the device is already
registered.

Call the necessary function to set add the orientation property when the
connector is created so that it is available before the device is
registered.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120114313.2087015-1-john@metanate.com

drm/ttm: prevent moving of pinned BOs

We have checks for this in the individual drivers move callback, but
it's probably better to generally forbid that on a higher level.

Also stops exporting ttm_resource_compat() since that's not necessary
any more after removing the extra checks in vmwgfx.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130120636.63765-6-matthew.auld@intel.com

drm/ttm: stop allocating a dummy resource for pipelined gutting

That should not be necessary any more when drivers should at least be
able to handle a move without a resource.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130120636.63765-5-matthew.auld@intel.com

drm/ttm: stop allocating dummy resources during BO creation

That should not be necessary any more when drivers should at least be
able to handle the move without a resource.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130120636.63765-4-matthew.auld@intel.com

drm/ttm: clear the ttm_tt when bo->resource is NULL

In the next few patches, when initially creating a ttm BO, the
bo->resource is NULL, and the driver is then expected to handle the
initial dummy move.  However, if this is created as a system resource
the first ttm_tt we create will always have the clear value set to
false. Previously the initial ttm_tt would be created in
ttm_bo_validate() with the clear parameter always set to true.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-3-matthew.auld@intel.com
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/i915/ttm: audit remaining bo->resource

In the near future TTM will have NULL bo->resource when the object is
initially created, plus after calling into pipeline-gutting. Try to
handle the remaining cases. In practice NULL bo->resource should be
taken to mean swapped-out or purged object.

v2 (Andrzej):
  - Rather make i915_ttm_cpu_maps_iomem() return false with NULL
    resource.

References: 516198d317d8 ("drm/i915: audit bo->resource usage v3")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-2-matthew.auld@intel.com
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/i915/ttm: fix sparse warning

Sparse complains with:

drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse:
expected restricted vm_fault_t [assigned] [usertype] ret
drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse: got int

Fixes: 516198d317d8 ("drm/i915: audit bo->resource usage v3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-1-matthew.auld@intel.com
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

accel/ivpu: Fix old dma_buf api usage

Update according to new dma-buf locking scheme.

Remove redundant WARN_ON()'s, dma_buf functions internally
have the same warnings already.

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-5-stanislaw.gruszka@linux.intel.com

accel/ivpu: Set dma max_segment_size

Avoid below spurious warning:

[  264.844029] DMA-API: intel_vpu 0000:00:0b.0: mapping sg segment longer than device claims to support [len=143360] [max=65536]
[  264.844038] WARNING: CPU: 0 PID: 1254 at kernel/dma/debug.c:1160 debug_dma_map_sg+0x6ca/0xb70

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-4-stanislaw.gruszka@linux.intel.com

accel/ivpu: Send VPU_JSM_MSG_CONTEXT_DELETE when deleting context

The VPU_JSM_MSG_CONTEXT_DELETE will remove any resources associated
with the SSID, that included any blobs create by the user space
application.

The command can also remove doorbell registrations, but since this
does not work in HW scheduling case, we do not depend on this
capability and unregister the doorbells explicitly.

Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-3-stanislaw.gruszka@linux.intel.com

accel/ivpu: Fix FW API data alignment issues

FW API structures have been updated to fix misaligned
structure members.

Also changed JSM message header format to account for
future improvements.

Added explicit check for minimum supported JSM API version.

Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-2-stanislaw.gruszka@linux.intel.com

drm/rockchip: Drop unbalanced obj unref

In the error path, rockchip_drm_gem_object_mmap() is dropping an obj
reference that it doesn't own.

Fixes: 41315b793e13 ("drm/rockchip: use drm_gem_mmap helpers")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119231734.2884543-1-robdclark@gmail.com

drm/rockchip: avoid duplicate mappings for IOMMU devices

If a buffer is allocated with alloc_kmap, then it is vmap'd on creation
and there is no reason to map it again in rockchip_gem_prime_vmap() when
the existing mapping can be used.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110172415.2853420-1-john@metanate.com

drm/rockchip: vop: Quiet always-warning AFBC log

The downstream code from which this was derived didn't ever run through
this 'switch' block with non-AFBC formats, but the upstream code does --
we use this function to probe whether a given format is supported.

Demote the warning to eliminate this sort of warning seen on every
boot:

  [drm] unsupported AFBC format[3231564e]

And make it warn more than once, because if we *actually* care to see
what formats we're probing/rejecting and for what reasons, we probably
care about more than just the first message.

Drop the comment, because one of the two *is* commonly reachable.

And lastly, drop the unreachable return; we'd do better to let the
compiler complain if we start hitting this unexpectedly.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031101557.1.Ic1569d394173c1c3016142fee4bb87a09753db94@changeid

drm/rockchip: vop2: add support for the rgb output block

The Rockchip VOP2 features an internal RGB output block, which can be
attached any video port of the VOP2. Add support for this output block.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124054706.3921383-6-michael.riesch@wolfvision.net

drm/rockchip: vop2: use symmetric function pair vop2_{create,destroy}_crtcs

Let the function name vop2_create_crtcs reflect that the function creates
multiple CRTCS. Also, use a symmetric function pair to create and destroy
the CRTCs and the corresponding planes.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124054706.3921383-5-michael.riesch@wolfvision.net

drm/rockchip: rgb: add video_port parameter to init function

The VOP2 driver has more than one video port, hence the hard-coded
port id will not work anymore. Add an extra parameter for the video
port id to the rockchip_rgb_init function.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124054706.3921383-4-michael.riesch@wolfvision.net

drm/rockchip: rgb: embed drm_encoder into rockchip_encoder

Commit 540b8f271e53 ("drm/rockchip: Embed drm_encoder into
rockchip_decoder") provides the means to pass the endpoint ID to the
VOP2 driver, which sets the interface MUX accordingly. However, this
step has not yet been carried out for the RGB output block. Embed the
drm_encoder structure into the rockchip_encoder structure and set the
endpoint ID correctly.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124054706.3921383-3-michael.riesch@wolfvision.net

drm/rockchip: vop2: initialize possible_crtcs properly

The variable possible_crtcs is only initialized for primary and
overlay planes. Since the VOP2 driver only supports these plane
types at the moment, the current code is safe. However, in order
to provide a future-proof solution, fix the initialization of
the variable.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124054706.3921383-2-michael.riesch@wolfvision.net

dt-bindings: display: rockchip: convert analogix_dp-rockchip.txt to yaml

Convert analogix_dp-rockchip.txt to yaml.

Changed:
  Add power-domains property
  File name

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/88a5a9e3-9bc8-5966-22ec-5bdb1fa7a5b1@gmail.com

dt-bindings: display: bridge: convert analogix_dp.txt to yaml

Convert analogix_dp.txt to yaml for use as common document.

Changed:
  Relexed requirements

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/489e7bd3-fa26-885f-4104-8b0b29aa4f2b@gmail.com

dt-bindings: display: rockchip: convert dw_mipi_dsi_rockchip.txt to yaml

Convert dw_mipi_dsi_rockchip.txt to yaml.

Changed:
  file name
  requirements

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/d6dc8453-4807-0a5d-15bf-6dcf80dcd0fe@gmail.com

dt-bindings: display: bridge: snps,dw-mipi-dsi: fix clock properties

Fix clock properties from the common snps,dw-mipi-dsi.yaml file,
as they don't match with what is used on the SoCs.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/78b4548e-dfe1-d0c6-f96c-5d40f28f8b2e@gmail.com

dt-bindings: display: dsi-controller: move clock-master property

The clock-master property is used for the controller and not in the panel,
so move it there.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1c3b18ad-350f-e862-de98-a775e11e132c@gmail.com

dt-bindings: soc: rockchip: grf: add rockchip,lvds.yaml

Add new converted rockchip,lvds.yaml to grf.yaml file.
Prepare for more SoCs with lvds output.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ff3644da-e5ae-f795-c7d9-454b8c8bdfe8@gmail.com

dt-bindings: display: rockchip: convert rockchip-lvds.txt to YAML

Convert rockchip-lvds.txt to YAML.

Changed:
  Add power-domains property.
  Requirements between PX30 and RK3288

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/67771143-fd83-383d-41b2-68e8707134e8@gmail.com

drm/arm/malidp: use sysfs_emit in show function callback

According to Documentation/filesystems/sysfs.rst, the show() callback
function of kobject attributes should strictly use sysfs_emit() instead
of sprintf() family functions.
Issue identified using the device_attr_show.cocci Coccinelle script.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9Q5Tt8c9WBDxeyV@ubun2204.myguest.virtualbox.org

drm/format-helper: Use KUNIT_EXPECT_MEMEQ macro

Commit b8a926bea8b1 ("kunit: Introduce KUNIT_EXPECT_MEMEQ and
KUNIT_EXPECT_MEMNEQ macros") introduced a new macro to compare blocks of
memory and, if the test fails, print the result in a human-friendly
format. Therefore, use KUNIT_EXPECT_MEMEQ to compare memory blocks in
replacement of the KUNIT_EXPECT_EQ macro.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130125554.363481-1-mairacanal@riseup.net

drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable

The unprepare sequence has started to fail after moving to panel bridge
code in the msm drm driver (commit 007ac0262b0d ("drm/msm/dsi: switch to
DRM_PANEL_BRIDGE")). You'll see messages like this in the kernel logs:

   panel-boe-tv101wum-nl6 ae94000.dsi.0: failed to set panel off: -22

This is because boe_panel_enter_sleep_mode() needs an operating DSI link
to set the panel into sleep mode. Performing those writes in the
unprepare phase of bridge ops is too late, because the link has already
been torn down by the DSI controller in post_disable, i.e. the PHY has
been disabled, etc. See dsi_mgr_bridge_post_disable() for more details
on the DSI .

Split the unprepare function into a disable part and an unprepare part.
For now, just the DSI writes to enter sleep mode are put in the disable
function. This fixes the panel off routine and keeps the panel happy.

My Wormdingler has an integrated touchscreen that stops responding to
touch if the panel is only half disabled too. This patch fixes it. And
finally, this saves power when the screen is off because without this
fix the regulators for the panel are left enabled when nothing is being
displayed on the screen.

Fixes: 007ac0262b0d ("drm/msm/dsi: switch to DRM_PANEL_BRIDGE")
Fixes: a869b9db7adf ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel")
Cc: yangcong <yangcong5@huaqin.corp-partner.google.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230106030108.2542081-1-swboyd@chromium.org

accel/ivpu: avoid duplicate assignment

With extra warnings enabled, gcc warns about two assignments
of the same .mmap callback:

In file included from drivers/accel/ivpu/ivpu_drv.c:10:
include/drm/drm_accel.h:31:27: error: initialized field overwritten [-Werror=override-init]
   31 |         .mmap           = drm_gem_mmap
      |                           ^~~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.c:360:9: note: in expansion of macro 'DRM_ACCEL_FOPS'
  360 |         DRM_ACCEL_FOPS,
      |         ^~~~~~~~~~~~~~

Remove the unused local assignment.

Fixes: e868cc591e89 ("accel: Add .mmap to DRM_ACCEL_FOPS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126163804.3648051-2-arnd@kernel.org

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.2-rc6.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drivers: Restore alignment and newline in Makefile

The introduction of drivers/accel/ broke alignment, and removed the
newline at the end of the file.  Fix all of that.

Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124104145.3962497-1-geert+renesas@glider.be

Merge v6.2-rc6 into drm-next

Due to holidays we started -next with more -fixes in-flight than
usual, and people have been asking where they are. Backmerge to get
things better in sync.

Conflicts:
- Tiny conflict in drm_fbdev_generic.c between variable rename and
  missing error handling that got added.
- Conflict in drm_fb_helper.c between the added call to vgaswitcheroo
  in drm_fb_helper_single_fb_probe and a refactor patch that extracted
  lots of helpers and incidentally removed the dev local variable.
  Readd it to make things compile.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

dt-bindings: display: simple-framebuffer: Document the panel node

Document the new panel node and what it is used for.

Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126182435.70544-3-rayyan@ansari.sh

drm/simpledrm: Allow physical width and height configuration via panel node

Parse the width-mm and height-mm devicetree properties of the panel node,
and use this to set the DRM Display Mode instead of calculating it
based on a hardcoded DPI.

Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126182435.70544-2-rayyan@ansari.sh

accel: fix CONFIG_DRM dependencies

At the moment, accel drivers can be built-in even with CONFIG_DRM=m,
but this causes a link failure:

x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_dev_init':
ivpu_drv.c:(.text+0x1535): undefined reference to `drmm_kmalloc'
x86_64-linux-ld: ivpu_drv.c:(.text+0x1562): undefined reference to `drmm_kmalloc'
x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_remove':
ivpu_drv.c:(.text+0x1faa): undefined reference to `drm_dev_unregister'
x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_probe':
ivpu_drv.c:(.text+0x1fef): undefined reference to `__devm_drm_dev_alloc'

The problem is that DRM_ACCEL is a 'bool' symbol, so driver that
only depend on DRM_ACCEL but not also on DRM do not see the restriction
to =m configs.

To ensure that each accel driver has an implied dependency on CONFIG_DRM,
enclose the entire Kconfig file in an if/endif check.

Fixes: 8bf4889762a8 ("drivers/accel: define kconfig and register a new major")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127221504.2522909-1-arnd@kernel.org

drm/shmem: Cleanup drm_gem_shmem_create_with_handle()

Once we create the handle, the handle owns the reference.  Currently
nothing was doing anything with the shmem ptr after the handle was
created, but let's change drm_gem_shmem_create_with_handle() to not
return the pointer, so-as to not encourage problematic use of this
function in the future.  As a bonus, it makes the code a bit cleaner.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123154831.3191821-1-robdclark@gmail.com

Merge tag 'amd-drm-next-6.3-2023-01-27' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.3-2023-01-27:

amdgpu:
- GC11 fixes
- SMU13 fixes
- Freesync fixes
- DP MST fixes
- DP MST code rework and cleanup
- AV1 fixes for VCN4
- DCN 3.2.x fixes
- PSR fixes
- DML optimizations
- DC link code rework

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127225917.2419162-1-alexander.deucher@amd.com

Merge tag 'drm/tegra/for-6.3-rc1' of https://gitlab.freedesktop.org/drm/tegra into drm-next

drm/tegra: Changes for v6.3-rc1

This set of changes includes a rework of the custom syncpoint interrupt
code to take better advantage of existing DRM/KMS infrastructure.

There's also various bits of cleanup and fixes included.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127170119.495943-1-thierry.reding@gmail.com

Merge tag 'drm-next-20230127' of git://git./linux/kernel/git/pinchartl/linux into drm-next

Renesas R-Car DU fixes and improvements

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9QCw3SkHm6k1bwJ@pendragon.ideasonboard.com

Merge tag 'drm-intel-next-2023-01-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 feature pull #2 v6.3:

Features and functionality:
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid (Jani)
- Start using unversioned DMC firmware paths for new platforms (Gustavo)

Refactoring and cleanups:
- ELD refactor: Stop using hardware buffer, precompute ELD, and wire up ELD in
  the state checker (Ville)
- Use generics for debugfs device parameters (Jani)
- DSB refactoring and fixes (Ville)
- Header refactoring, add new intel_display_limits.h (Jani)
- Split out GMCH code to a new file (Jani)
- Split out vblank code to a new file (Jani)
- i915_drv.h and struct drm_i915_private cleanups (Jani)
- Simplify FBC and DRRS debug attributes (Deepak R Varma)
- Remove some single-use macros (Rodrigo)

Fixes:
- Fix scaler limits for display versions 12 and 13 (Luca)
- Fix plane source size check for zero height (Drew Davenport)
- Implement PSR2 selective fetch workaround (Jouni)
- Expand a PSR workaound to more platforms and pipes (Jouni)
- Expand an HDMI infoframe workaround to all MTL steppings (Jouni)
- Enable PIPEDMC whenever its corresponding pipe is enabled (Imre)

Merges:
- Backmerge drm-next (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87tu0c44gv.fsf@intel.com

Merge tag 'drm-habanalabs-next-2023-01-26' of https://git./linux/kernel/git/ogabbay/linux into drm-next

This tag contains habanalabs driver and accel changes for v6.3:

- Moved the driver to the accel subsystem. Currently only the files were
  moved (including the uapi file which was also renamed). This doesn't
  include registering to the accel subsystem. This will probably be only
  in the next kernel version.

- In case of decoder error (axi error) in Gaudi2, we can now find the exact
  IP that initiated the erroneous transaction and print the details for
  better debug.

- Add more trace events. We now can trace mmio transactions and communication
  with the preboot firmware.

- Add to Gaudi2 support for abrupt reset that is done by the firmware. This
  was support so far only for Gaudi1.

- Add uAPI to flush memory transactions (to the device memory). This is
  needed by the communications library in case of doing p2p with a host NIC
  which access our HBM directly through the PCI BAR.

- Add uAPI to pass-through a request from user-space to firmware and get the
  result back to user-space. This will allow the driver code to avoid the
  need to add new packet (in the communication channel with the firmware) for
  every new request type.

- Remove the option to export dma-buf by memory allocation handle in our uAPI.
  This was planned for Gaudi2 but was never used. Instead, we will do export
  by memory address (same as Gaudi1). In addition, we added the option to
  specify an offset to the address. This is needed in Gaudi2 because there
  the user allocates the entire HBM in one allocation, but would like to
  export only small part of it.

- Multiple bug fixes, refactors and small optimizations.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126213317.GA1520525@ogabbay-vm-u20.habana-labs.com

Merge tag 'drm-misc-next-2023-01-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.3:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

 * fbdev-helper: Streamline code in generic fbdev and its helpers

 * TTM: Fixes plus their reverts

Driver Changes:

 * accel/ivpu: Typo fixes

 * i915: TTM-related fixes

 * nouveau: Remove unused return value from disable helper

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9I2nOzHxTxPeTjg@linux-uq9g

Linux 6.2-rc6

Merge tag 'irq_urgent_for_v6.2_rc6' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Borislav Petkov:

 - Cleanup the firmware node for the new IRQ MSI domain properly, to
   avoid leaking memory

* tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/msi: Free the fwnode created by msi_create_device_irq_domain()

Merge tag 'x86_urgent_for_v6.2_rc6' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Start checking for -mindirect-branch-cs-prefix clang support too now
   that LLVM 16 will support it

 - Fix a NULL ptr deref when suspending with Xen PV

 - Have a SEV-SNP guest check explicitly for features enabled by the
   hypervisor and fail gracefully if some are unsupported by the guest
   instead of failing in a non-obvious and hard-to-debug way

 - Fix a MSI descriptor leakage under Xen

 - Mark Xen's MSI domain as supporting MSI-X

 - Prevent legacy PIC interrupts from being resent in software by
   marking them level triggered, as they should be, which lead to a NULL
   ptr deref

* tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block
  acpi: Fix suspend with Xen PV
  x86/sev: Add SEV-SNP guest feature negotiation support
  x86/pci/xen: Fixup fallout from the PCI/MSI overhaul
  x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain
  x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL

Merge tag 'input-for-v6.2-rc5' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - touchpads on HP 15-* laptops switched back to PS/2 emulation mode

 - a quirk for Clevo PCX0DX/TUXEDO XP1511 to make sure keyboard is
   responding after resume

* tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Clevo PCX0DX to i8042 quirk table
  Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"

Merge tag 'cxl-fixes-for-6.2-rc6' of git://git./linux/kernel/git/cxl/cxl

Pull cxl fixes from Dan Williams:
 "A couple of fixes for bugs introduced during the merge window. One is
  a regression, the other was a bug in the CXL AER handler:

   - Fix a crash regression due to module load order of cxl_pmem.ko

   - Fix wrong register offset read in CXL AER handling path"

* tag 'cxl-fixes-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/pmem: Fix nvdimm unregistration when cxl_pmem driver is absent
  cxl: fix cxl_report_and_clear() RAS UE addr mis-assignment

Revert "mm/compaction: fix set skip in fast_find_migrateblock"

This reverts commit 7efc3b7261030da79001c00d92bc3392fd6c664c.

We have got openSUSE reports (Link 1) for 6.1 kernel with khugepaged
stalling CPU for long periods of time.  Investigation of tracepoint data
shows that compaction is stuck in repeating fast_find_migrateblock()
based migrate page isolation, and then fails to migrate all isolated
pages.

Commit 7efc3b726103 ("mm/compaction: fix set skip in fast_find_migrateblock")
was suspected as it was merged in 6.1 and in theory can indeed remove a
termination condition for fast_find_migrateblock() under certain
conditions, as it removes a place that always marks a scanned pageblock
from being re-scanned.  There are other such places, but those can be
skipped under certain conditions, which seems to match the tracepoint
data.

Testing of revert also appears to have resolved the issue, thus revert
the commit until a more robust solution for the original problem is
developed.

It's also likely this will fix qemu stalls with 6.1 kernel reported in
Link 2, but that is not yet confirmed.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1206848
Link: https://lore.kernel.org/kvm/b8017e09-f336-3035-8344-c549086c2340@kernel.org/
Link: https://lore.kernel.org/lkml/20230125134434.18017-1-mgorman@techsingularity.net/
Fixes: 7efc3b726103 ("mm/compaction: fix set skip in fast_find_migrateblock")
Cc: <stable@vger.kernel.org>
Tested-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix up more non-executable files marked executable

Joe found another DT file that shouldn't be executable, and that
frustrated me enough that I went hunting with this script:

    git ls-files -s |
        grep '^100755' |
        cut -f2 |
        xargs grep -L '^#!'

and that found another file that shouldn't have been marked executable
either, despite being in the scripts directory.

Maybe these two are the last ones at least for now.  But I'm sure we'll
be back in a few years, fixing things up again.

Fixes: 8c6789f4e2d4 ("ASoC: dt-bindings: Add Everest ES8326 audio CODEC")
Fixes: 4d8e5cd233db ("locking/atomics: Fix scripts/atomic/ script permissions")
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag '6.2-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd

Pull ksmbd server fixes from Steve French:
 "Four smb3 server fixes, all also for stable:

   - fix for signing bug

   - fix to more strictly check packet length

   - add a max connections parm to limit simultaneous connections

   - fix error message flood that can occur with newer Samba xattr
     format"

* tag '6.2-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: downgrade ndr version error message to debug
  ksmbd: limit pdu length size according to connection status
  ksmbd: do not sign response to session request for guest login
  ksmbd: add max connections parameter

Merge tag '6.2-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fix from Steve French:
 "Fix for reconnect oops in smbdirect (RDMA), also is marked for stable"

* tag '6.2-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix oops due to uncleared server->smbd_conn in reconnect

Merge tag 'block-6.2-2023-01-27' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:
 "Minor tweaks for this release:

   - NVMe pull request via Christoph:
        - Flush initial scan_work for async probe (Keith Busch)
        - Fix passthrough csi check (Keith Busch)
        - Fix nvme-fc initialization order (Ross Lagerwall)

   - Fix for tearing down non-started device in ublk (Ming)"

* tag 'block-6.2-2023-01-27' of git://git.kernel.dk/linux:
  block: ublk: move ublk_chr_class destroying after devices are removed
  nvme: fix passthrough csi check
  nvme-pci: flush initial scan_work for async probe
  nvme-fc: fix initialization order

Merge tag 'io_uring-6.2-2023-01-27' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:
 "Two small fixes for this release:

   - Sanitize how async prep is done for drain requests, so we ensure
     that it always gets done (Dylan)

   - A ring provided buffer recycling fix for multishot receive (me)"

* tag 'io_uring-6.2-2023-01-27' of git://git.kernel.dk/linux:
  io_uring: always prep_async for drain requests
  io_uring/net: cache provided buffer group value for multishot receives

Merge tag 'hardening-v6.2-rc6' of git://git./linux/kernel/git/kees/linux

Pull hardening fixes from Kees Cook:

 - Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST

 - Reorganize gcc-plugin includes for GCC 13

 - Silence bcache memcpy run-time false positive warnings

* tag 'hardening-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  bcache: Silence memcpy() run-time false positive warnings
  gcc-plugins: Reorganize gimple includes for GCC 13
  kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST

Merge tag 'trace-v6.2-rc5' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

 - Fix filter memory leak by calling ftrace_free_filter()

 - Initialize trace_printk() earlier so that ftrace_dump_on_oops shows
   data on early crashes.

 - Update the outdated instructions in scripts/tracing/ftrace-bisect.sh

 - Add lockdep_is_held() to fix lockdep warning

 - Add allocation failure check in create_hist_field()

 - Don't initialize pointer that gets set right away in enabled_monitors_write()

 - Update MAINTAINER entries

 - Fix help messages in Kconfigs

 - Fix kernel-doc header for update_preds()

* tag 'trace-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  bootconfig: Update MAINTAINERS file to add tree and mailing list
  rv: remove redundant initialization of pointer ptr
  ftrace: Maintain samples/ftrace
  tracing/filter: fix kernel-doc warnings
  lib: Kconfig: fix spellos
  trace_events_hist: add check for return value of 'create_hist_field'
  tracing/osnoise: Use built-in RCU list checking
  tracing: Kconfig: Fix spelling/grammar/punctuation
  ftrace/scripts: Update the instructions for ftrace-bisect.sh
  tracing: Make sure trace_printk() can output as soon as it can be used
  ftrace: Export ftrace_free_filter() to modules

amdgpu: fix build on non-DCN platforms.

This fixes the build here locally on my 32-bit arm build.

Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit f439a959dcfb6b39d6fd4b85ca1110a1d1de1587)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'i2c-for-6.2-rc6' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "A bunch of driver fixes with a tiny bit of new IDs"

* tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rk3x: fix a bunch of kernel-doc warnings
  i2c: axxia: use 'struct' for kernel-doc notation
  dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
  i2c: mxs: suppress probe-deferral error message
  i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  i2c: designware: Fix unbalanced suspended flag
  i2c: designware: use casting of u64 in clock multiplication to avoid overflow

Merge tag 'gpio-fixes-for-v6.2-rc6' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - fix the -c option in the gpio-event-mode user-space example program

 - fix the irq number translation in gpio-ep93xx and make its irqchip
   immutable

 - add a missing spin_unlock in error path in gpio-mxc

 - fix a suspend breakage on System76 and Lenovo Gen2a introduced in
   GPIO ACPI

* tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  tools: gpio: fix -c option of gpio-event-mon
  gpio: ep93xx: remove unused variable
  gpio: ep93xx: Make irqchip immutable
  gpio: ep93xx: Fix port F hwirq numbers in handler
  gpio: mxc: Unlock on error path in mxc_flip_edge()
  gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode

Merge tag 'regulator-fix-v6.2-rc5' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "A fix for the DT binding documentation which dropped a property when
  being converted to YAML format causing spurious errors validating
  device trees for platforms using the device"

* tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: dt-bindings: samsung,s2mps14: add lost samsung,ext-control-gpios

Merge tag 'ovl-fixes-6.2-rc6' of git://git./linux/kernel/git/mszeredi/vfs

Pull overlayfs fixes from Miklos Szeredi:
 "Fix two bugs, a recent one introduced in the last cycle, and an older
  one from v5.11"

* tag 'ovl-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fail on invalid uid/gid mapping at copy up
  ovl: fix tmpfile leak

Merge tag 'drm-fixes-2023-01-27' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Fairly small this week as well, i915 has a memory leak fix and some
  minor changes, and amdgpu has some MST fixes, and some other minor
  ones:

  drm:
   - DP MST kref fix
   - fb_helper: check return value

  i915:
   - Fix BSC default context for Meteor Lake
   - Fix selftest-scheduler's modify_type
   - memory leak fix

  amdgpu:
   - GC11.x fixes
   - SMU13.0.0 fix
   - Freesync video fix
   - DP MST fixes
   - build fix"

* tag 'drm-fixes-2023-01-27' of git://anongit.freedesktop.org/drm/drm:
  amdgpu: fix build on non-DCN platforms.
  drm/amd/display: Fix timing not changning when freesync video is enabled
  drm/display/dp_mst: Correct the kref of port.
  drm/amdgpu/display/mst: update mst_mgr relevant variable when long HPD
  drm/amdgpu/display/mst: limit payload to be updated one by one
  drm/amdgpu/display/mst: Fix mst_state->pbn_div and slot count assignments
  drm/amdgpu: declare firmware for new MES 11.0.4
  drm/amdgpu: enable imu firmware for GC 11.0.4
  drm/amd/pm: add missing AllowIHInterrupt message mapping for SMU13.0.0
  drm/amdgpu: remove unconditional trap enable on add gfx11 queues
  drm/fb-helper: Use a per-driver FB deferred I/O handler
  drm/fb-helper: Check fb_deferred_io_init() return value
  drm/i915/selftest: fix intel_selftest_modify_policy argument types
  drm/i915/mtl: Fix bcs default context
  drm/i915: Fix a memory leak with reused mmap_offset
  drm/drm_vma_manager: Add drm_vma_node_allow_once()

Merge tag 'acpi-6.2-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "Add ACPI backlight handling quirks for 3 machines (Hans de Goede)"

* tag 'acpi-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add backlight=native DMI quirk for Asus U46E
  ACPI: video: Add backlight=native DMI quirk for HP EliteBook 8460p
  ACPI: video: Add backlight=native DMI quirk for HP Pavilion g6-1d80nr

Merge tag 'thermal-6.2-rc6' of git://git./linux/kernel/git/rafael/linux-pm

Pull thermal control fixes from Rafael Wysocki:
 "Add locking to the Intel int340x thermal control driver to prevent its
  thermal zone callbacks from racing with firmware-induced thermal trip
  point updates (Srinivas Pandruvada, Rafael Wysocki)"

* tag 'thermal-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()
  thermal: intel: int340x: Protect trip temperature from concurrent updates

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Will Deacon:

 - Fix event counting regression in Arm CMN PMU driver due to broken
   optimisation

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Partially revert "perf/arm-cmn: Optimise DTC counter accesses"

Merge tag 'riscv-for-linus-6.2-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A few DT bindings fixes to more closely align the ISA string
   requirements between the bindings and the ISA manual.

 - A handful of build error/warning fixes.

 - A fix to move init_cpu_topology() later in the boot flow, so it can
   allocate memory.

 - The IRC channel is now in the MAINTAINERS file, so it's easier to
   find.

* tag 'riscv-for-linus-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move call to init_cpu_topology() to later initialization stage
  riscv/kprobe: Fix instruction simulation of JALR
  riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT
  MAINTAINERS: add an IRC entry for RISC-V
  RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2
  dt-bindings: riscv: fix single letter canonical order
  dt-bindings: riscv: fix underscore requirement for multi-letter extensions

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - fix nommu assignment build warning

 - fix -Wundef preprocessor warning

 - reduce __thumb2__ definitions for crypto files that require it

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9287/1: Reduce __thumb2__ definition to crypto files that require it
  ARM: 9284/1: include <asm/pgtable.h> from proc-macros.S to fix -Wundef warnings
  ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment

Merge tag 'linux-kselftest-fixes-6.2-rc6' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "A single fix to a amd-pstate test Makefile bug that deletes source
  files during make clean run"

* tag 'linux-kselftest-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: amd-pstate: Don't delete source files via Makefile

drm/tegra: nvdec: Use tegra_dev_iommu_get_stream_id()

Use the newly implemented tegra_dev_iommu_get_stream_id() helper to
encapsulate and centralize the IOMMU stream ID access.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: vic: Use tegra_dev_iommu_get_stream_id()

Use the newly implemented tegra_dev_iommu_get_stream_id() helper to
encapsulate and centralize the IOMMU stream ID access.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: Use tegra_dev_iommu_get_stream_id()

Use the newly implemented tegra_dev_iommu_get_stream_id() helper to
encapsulate and centralize the IOMMU stream ID access.

Signed-off-by: Thierry Reding <treding@nvidia.com>

gpu: host1x: Use tegra_dev_iommu_get_stream_id()

Use the newly implemented tegra_dev_iommu_get_stream_id() helper to
encapsulate and centralize the IOMMU stream ID access.

Signed-off-by: Thierry Reding <treding@nvidia.com>

ovl: fail on invalid uid/gid mapping at copy up

If st_uid/st_gid doesn't have a mapping in the mounter's user_ns, then
copy-up should fail, just like it would fail if the mounter task was doing
the copy using "cp -a".

There's a corner case where the "cp -a" would succeed but copy up fail: if
there's a mapping of the invalid uid/gid (65534 by default) in the user
namespace.  This is because stat(2) will return this value if the mapping
doesn't exist in the current user_ns and "cp -a" will in turn be able to
create a file with this uid/gid.

This behavior would be inconsistent with POSIX ACL's, which return -1 for
invalid uid/gid which result in a failed copy.

For consistency and simplicity fail the copy of the st_uid/st_gid are
invalid.

Fixes: 459c7c565ac3 ("ovl: unprivieged mounts")
Cc: <stable@vger.kernel.org> # v5.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Seth Forshee <sforshee@kernel.org>

ovl: fix tmpfile leak

Missed an error cleanup.

Reported-by: syzbot+fd749a7ea127a84e0ffd@syzkaller.appspotmail.com
Fixes: 2b1a77461f16 ("ovl: use vfs_tmpfile_open() helper")
Cc: <stable@vger.kernel.org> # v6.1
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

io_uring: always prep_async for drain requests

Drain requests all go through io_drain_req, which has a quick exit in case
there is nothing pending (ie the drain is not useful). In that case it can
run the issue the request immediately.

However for safety it queues it through task work.
The problem is that in this case the request is run asynchronously, but
the async work has not been prepared through io_req_prep_async.

This has not been a problem up to now, as the task work always would run
before returning to userspace, and so the user would not have a chance to
race with it.

However - with IORING_SETUP_DEFER_TASKRUN - this is no longer the case and
the work might be defered, giving userspace a chance to change data being
referred to in the request.

Instead _always_ prep_async for drain requests, which is simpler anyway
and removes this issue.

Cc: stable@vger.kernel.org
Fixes: c0e0d6ba25f1 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20230127105911.2420061-1-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

tools: gpio: fix -c option of gpio-event-mon

Following line should listen for a rising edge and exit after the first
one since '-c 1' is provided.

    # gpio-event-mon -n gpiochip1 -o 0 -r -c 1

It works with kernel 4.19 but it doesn't work with 5.10. In 5.10 the
above command doesn't exit after the first rising edge it keep listening
for an event forever. The '-c 1' is not taken into an account.
The problem is in commit 62757c32d5db ("tools: gpio: add multi-line
monitoring to gpio-event-mon").
Before this commit the iterator 'i' in monitor_device() is used for
counting of the events (loops). In the case of the above command (-c 1)
we should start from 0 and increment 'i' only ones and hit the 'break'
statement and exit the process. But after the above commit counting
doesn't start from 0, it start from 1 when we listen on one line.
It is because 'i' is used from one more purpose, counting of lines
(num_lines) and it isn't restore to 0 after following code

    for (i = 0; i < num_lines; i++)
        gpiotools_set_bit(&values.mask, i);

Restore the initial value of the iterator to 0 in order to allow counting
of loops to work for any cases.

Fixes: 62757c32d5db ("tools: gpio: add multi-line monitoring to gpio-event-mon")
Signed-off-by: Ivo Borisov Shopov <ivoshopov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

gpio: ep93xx: remove unused variable

This one was left behind by a previous cleanup patch:

drivers/gpio/gpio-ep93xx.c: In function 'ep93xx_gpio_add_bank':
drivers/gpio/gpio-ep93xx.c:366:34: error: unused variable 'ic' [-Werror=unused-variable]

Fixes: 216f37366e86 ("gpio: ep93xx: Make irqchip immutable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

accel/ivpu: PM: remove broken ivpu_dbg() statements

When CONFIG_PM is disabled, the driver fails to build:

drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get':
drivers/accel/ivpu/ivpu_pm.c:240:84: error: 'struct dev_pm_info' has no member named 'usage_count'
  240 |         ivpu_dbg(vdev, RPM, "rpm_get count %d\n", atomic_read(&vdev->drm.dev->power.usage_count));
      |                                                                                    ^
include/linux/dynamic_debug.h:223:29: note: in definition of macro '__dynamic_func_call_cls'
  223 |                 func(&id, ##__VA_ARGS__);                       \
      |                             ^~~~~~~~~~~
include/linux/dynamic_debug.h:249:9: note: in expansion of macro '_dynamic_func_call_cls'
  249 |         _dynamic_func_call_cls(_DPRINTK_CLASS_DFLT, fmt, func, ##__VA_ARGS__)
      |         ^~~~~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:272:9: note: in expansion of macro '_dynamic_func_call'
  272 |         _dynamic_func_call(fmt, __dynamic_dev_dbg,              \
      |         ^~~~~~~~~~~~~~~~~~
include/linux/dev_printk.h:155:9: note: in expansion of macro 'dynamic_dev_dbg'
  155 |         dynamic_dev_dbg(dev, dev_fmt(fmt), ##__VA_ARGS__)
      |         ^~~~~~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.h:65:17: note: in expansion of macro 'dev_dbg'
   65 |                 dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args);          \
      |                 ^~~~~~~
drivers/accel/ivpu/ivpu_pm.c:240:9: note: in expansion of macro 'ivpu_dbg'
  240 |         ivpu_dbg(vdev, RPM, "rpm_get count %d\n", atomic_read(&vdev->drm.dev->power.usage_count));
      |         ^~~~~~~~

It would be possible to rework these statements to only conditionally print
the reference counter, or to make the driver depend on CONFIG_PM, but my
impression is that these are not actually needed at all if the driver generally
works, or they could be put back when required. Just remove all four of these
to make the driver build in all configurations.

Fixes: 852be13f3bd3 ("accel/ivpu: Add PM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126163804.3648051-1-arnd@kernel.org

drm/panel: Add Magnachip D53E6EA8966 Panel Driver

Support Magnachip D53E6EA8966 based panels such as the Samsung
AMS495QA01 panel as found on the Anbernic RG503. Note this driver
supports only the AMS495QA01 today which receives video signals via DSI,
however it receives commands via 3-wire SPI using DBI.

Co-developed-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123154603.1315112-4-macroalpha82@gmail.com

dt-bindings: display: panel: Add Samsung AMS495QA01

Add documentation for Samsung AMS495QA01 panel (with Magnachip
D53E6EA8966 controller IC).

Co-developed-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123154603.1315112-3-macroalpha82@gmail.com

drm: of: Add drm_of_get_dsi_bus helper function

Add helper function to find DSI host for devices where DSI panel is not
a minor of a DSI bus (such as the Samsung AMS495QA01 panel or the
official Raspberry Pi touchscreen display).

Co-developed-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123154603.1315112-2-macroalpha82@gmail.com

drm: panel: jd9365da-h3: Add Radxa Display 8HD

Radxa Display 8HD is a family of DSI panels from Radxa that
uses jd9365da-h3 IC.

Add support for it.

Co-developed-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230123183312.436573-4-jagan@edgeble.ai