platform/kernel/linux-amlogic.git
14 years ago[media] Add the via framebuffer camera controller driver
Jonathan Corbet [Wed, 20 Oct 2010 00:32:11 +0000 (21:32 -0300)]
[media] Add the via framebuffer camera controller driver

Add a driver for the video capture port on VIA integrated chipsets.  This
version has a remaining OLPCism or two and expects to be talking to an
ov7670; those can be improved as the need arises.

This work was supported by the One Laptop Per Child project.
Thanks to Laurent Pinchart for a number of useful comments.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] ov7670: fix QVGA visible area
Daniel Drake [Mon, 18 Oct 2010 21:07:36 +0000 (18:07 -0300)]
[media] ov7670: fix QVGA visible area

The QVGA mode has a green horizontal line on the left hand side, and a red
(or sometimes blue) vertical line at the bottom. Tweak the visible area
to remove them.

Thanks to Mauro for explaining how to fix this.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] av7110: Fix driver name
Derek Kelly [Sat, 16 Oct 2010 19:33:53 +0000 (16:33 -0300)]
[media] av7110: Fix driver name

This patch changes the name of the av7110  driver from the
generic "dvb" to "av7110", to be descriptive of the driver.

I've included Oliver Endriss's ack from the original post, which
contained a mangled patch.  The content of the patch is unchanged.

Signed-off-by: Derek Kelly <user.vdr@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] em28xx: Add dvb support for Terratec Cinergy Hybrid T USB XS FR
Michel Garnier [Sat, 16 Oct 2010 17:42:01 +0000 (14:42 -0300)]
[media] em28xx: Add dvb support for Terratec Cinergy Hybrid T USB XS FR

Signed-off-by: Michel Garnier <catimimi@orange.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] ir-raw-event: Fix a stupid error at a printk
Mauro Carvalho Chehab [Wed, 20 Oct 2010 14:56:50 +0000 (11:56 -0300)]
[media] ir-raw-event: Fix a stupid error at a printk

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] cx231xx: Fix compilation breakage if DVB is not selected
Mauro Carvalho Chehab [Tue, 19 Oct 2010 00:18:49 +0000 (21:18 -0300)]
[media] cx231xx: Fix compilation breakage if DVB is not selected

In file included from drivers/media/video/cx231xx/cx231xx-audio.c:40:
drivers/media/video/cx231xx/cx231xx.h:559: error: field ‘frontends’ has incomplete type
make[4]: ** [drivers/media/video/cx231xx/cx231xx-audio.o] Erro 1
make[3]: ** [drivers/media/video/cx231xx] Erro 2
make[2]: ** [drivers/media/video] Erro 2
make[1]: ** [drivers/media] Erro 2
make: ** [drivers] Erro 2

Reported-by: Marcio Araujo Alves <froooozen@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] cx231xx: Remove IR support from the driver
Mauro Carvalho Chehab [Mon, 18 Oct 2010 22:28:07 +0000 (19:28 -0300)]
[media] cx231xx: Remove IR support from the driver

Polaris design uses MCE support. Instead of reinventing the wheel,
just let mceusb handle the remote controller.

Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Sri Devi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] cx231xx: Only register USB interface 1
Mauro Carvalho Chehab [Tue, 19 Oct 2010 00:10:46 +0000 (21:10 -0300)]
[media] cx231xx: Only register USB interface 1

Interface 0 is used by IR. The current driver starts initializing
on it, finishing on interface 6. Change the logic to only handle
interface 1. This allows another driver (mceusb) to take care of
the IR interface.

Reviewed-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Sri Devi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] mceusb: add support for cx231xx-based IR (e. g. Polaris)
Mauro Carvalho Chehab [Mon, 18 Oct 2010 19:32:50 +0000 (16:32 -0300)]
[media] mceusb: add support for cx231xx-based IR (e. g. Polaris)

For now, it adds support for Conexant EVK and for Pixelview.
We should probably find a better way to specify all Conexant
Polaris devices, to avoid needing to repeat this setup on
both mceusb and cx231xx-cards.

Reviewed-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Sri Devi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] tm6000: fix resource locking
Mauro Carvalho Chehab [Mon, 11 Oct 2010 13:48:11 +0000 (10:48 -0300)]
[media] tm6000: fix resource locking

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] tm6000: Use just one lock for devlist
Mauro Carvalho Chehab [Mon, 11 Oct 2010 12:57:34 +0000 (09:57 -0300)]
[media] tm6000: Use just one lock for devlist

This avoids a race condition

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] tm6000-alsa: fix some locking issues
Mauro Carvalho Chehab [Sun, 10 Oct 2010 00:15:33 +0000 (21:15 -0300)]
[media] tm6000-alsa: fix some locking issues

Those locking issues affect tvtime, causing a kernel oops/panic, due to
a race condition.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] tm6000: don't use BKL at the driver
Mauro Carvalho Chehab [Sat, 9 Oct 2010 20:05:14 +0000 (17:05 -0300)]
[media] tm6000: don't use BKL at the driver

Instead, use core lock handling.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] cx25840: Remove a now unused variable
Mauro Carvalho Chehab [Thu, 21 Oct 2010 13:13:37 +0000 (11:13 -0200)]
[media] cx25840: Remove a now unused variable

drivers/media/video/cx25840/cx25840-core.c: In function ‘cx25840_s_frequency’:
drivers/media/video/cx25840/cx25840-core.c:1563: warning: unused variable ‘state’

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] SR030PC30: Avoid use of uninitialized variables
Sylwester Nawrocki [Mon, 18 Oct 2010 09:51:35 +0000 (06:51 -0300)]
[media] SR030PC30: Avoid use of uninitialized variables

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] IR: ene_ir: don't upload all settings on each TX packet
Maxim Levitsky [Sat, 16 Oct 2010 22:56:30 +0000 (19:56 -0300)]
[media] IR: ene_ir: don't upload all settings on each TX packet

This is just unnessesary, and now more logical

Also a lot of refactoring

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] IR: ene_ir: add support for carrier reports
Maxim Levitsky [Sat, 16 Oct 2010 22:56:29 +0000 (19:56 -0300)]
[media] IR: ene_ir: add support for carrier reports

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] IR: extend ir_raw_event and do refactoring
Maxim Levitsky [Sat, 16 Oct 2010 22:56:28 +0000 (19:56 -0300)]
[media] IR: extend ir_raw_event and do refactoring

Add new event types for timeout & carrier report
Move timeout handling from ir_raw_event_store_with_filter to
ir-lirc-codec, where it is really needed.
Now lirc bridge ensures proper gap handling.
Extend lirc bridge for carrier & timeout reports

Note: all new ir_raw_event variables now should be initialized
like that: DEFINE_IR_RAW_EVENT(ev);

To clean an existing event, use init_ir_raw_event(&ev);

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] dvb-usb-gp8psk: Fix tuner timeout (against git)
Derek Kelly [Sat, 16 Oct 2010 19:07:47 +0000 (16:07 -0300)]
[media] dvb-usb-gp8psk: Fix tuner timeout (against git)

This patches adjusts the tuner delay to be longer in response to
several users experiencing tuner timeouts.  This change fixes that
problem and allows those users to be able to tune.

Signed-off-by: Derek Kelly <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] dvb-usb-gp8psk: Fix driver name
Derek Kelly [Sat, 16 Oct 2010 19:18:15 +0000 (16:18 -0300)]
[media] dvb-usb-gp8psk: Fix driver name

This patch updates the name of the dvb-usb-gp8psk driver
from "Genpix 8psk-to-USB2 DVB-S" to "Genpix DVB-S".
The old name doesn't reflect newer devices such as the
Skywalker line which also user this driver.

Signed-off-by: Derek Kelly <user.vdr@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] Add support for AUX_PLL on cx2583x chips
Sven Barth [Sat, 10 Jul 2010 18:02:21 +0000 (15:02 -0300)]
[media] Add support for AUX_PLL on cx2583x chips

This adds support for the AUX_PLL in cx2583x chips which is available in
those although the audio part of the chip is not.
The AUX_PLL is used at least by Terratec in their Grabster AV400 device.

Signed-off-by: Sven Barth <pascaldragon@googlemail.com>
Acked-by: Mike Isely <isely@pobox.com>
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] v4l-dvb: using vmalloc needs vmalloc.h in cx231xx-417.c
Stephen Rothwell [Tue, 19 Oct 2010 07:07:30 +0000 (18:07 +1100)]
[media] v4l-dvb: using vmalloc needs vmalloc.h in cx231xx-417.c

Fixes these build errors and warnings:

drivers/media/video/cx231xx/cx231xx-417.c: In function 'cx231xx_load_firmware':
drivers/media/video/cx231xx/cx231xx-417.c:943: error: implicit declaration of function 'vmalloc'
drivers/media/video/cx231xx/cx231xx-417.c:943: warning: cast to pointer from integer of different size
drivers/media/video/cx231xx/cx231xx-417.c:950: warning: cast to pointer from integer of different size
drivers/media/video/cx231xx/cx231xx-417.c:1039: error: implicit declaration of function 'vfree'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
14 years ago[media] msp3400: fix mute audio regression
Hans Verkuil [Sun, 17 Oct 2010 10:24:20 +0000 (07:24 -0300)]
[media] msp3400: fix mute audio regression

The switch to the new control framework caused a regression where the audio was
no longer unmuted after the carrier scan finished.

The original code attempted to set the volume control to its current value in
order to have the set-volume control code to be called that handles the volume
and muting. However, the framework will not call that code unless the new volume
value is different from the old.

Instead we now call msp_s_ctrl directly.

It is a bit of a hack: we really need a v4l2_ctrl_refresh_ctrl function for this
(or something along those lines).

Thanks to Andy Walls for bisecting this and to Shane Shrybman for reporting it!

Reported-by: Shane Shrybman <shrybman@teksavvy.com>
Thanks-to: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] gspca - main: Fix a regression with the PS3 Eye webcam
Jean-François Moine [Sat, 16 Oct 2010 16:54:05 +0000 (13:54 -0300)]
[media] gspca - main: Fix a regression with the PS3 Eye webcam

When audio is present, some alternate settings were skipped.
This prevented some webcams to work, especially when bulk transfer was used.
This patch permits to use the last or only alternate setting.

Reported-by: Antonio Ospite <ospite@studenti.unina.it>
Tested-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] Re: [git:v4l-dvb/v2.6.37] [media] Fix compilation of Siliconfile SR030PC30...
Hans Verkuil [Sun, 17 Oct 2010 20:14:15 +0000 (17:14 -0300)]
[media] Re: [git:v4l-dvb/v2.6.37] [media] Fix compilation of Siliconfile SR030PC30 VGA camera

Siliconfile SR030PC30 VGA camera fails to compile with this error:

drivers/media/video/sr030pc30.c: In function ‘sr030pc30_probe’:
drivers/media/video/sr030pc30.c:834: error: implicit declaration of function ‘kzalloc’
drivers/media/video/sr030pc30.c:834: warning: assignment makes pointer from integer without a cast
drivers/media/video/sr030pc30.c: In function ‘sr030pc30_remove’:
drivers/media/video/sr030pc30.c:858: error: implicit declaration of function ‘kfree’

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] hdpvr: add usb product id 0x4903
Janne Grunau [Mon, 11 Oct 2010 13:29:36 +0000 (10:29 -0300)]
[media] hdpvr: add usb product id 0x4903

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] hdpvr: decrease URB timeout to 90ms
Alan Young [Mon, 26 Jul 2010 11:50:32 +0000 (08:50 -0300)]
[media] hdpvr: decrease URB timeout to 90ms

Based on USB traces of the windows driver.

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] hdpvr: fix audio input setting for pre AC3 firmwares
Janne Grunau [Tue, 27 Jul 2010 14:01:47 +0000 (11:01 -0300)]
[media] hdpvr: fix audio input setting for pre AC3 firmwares

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] hdpvr: use AC3 as default audio codec for SPDIF
Janne Grunau [Tue, 27 Jul 2010 13:40:43 +0000 (10:40 -0300)]
[media] hdpvr: use AC3 as default audio codec for SPDIF

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] hdpvr: add two known to work firmware versions
Janne Grunau [Tue, 27 Jul 2010 14:03:35 +0000 (11:03 -0300)]
[media] hdpvr: add two known to work firmware versions

refine the firmware version test and print the version only once

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] hdpvr: print firmware date
Alan Young [Mon, 26 Jul 2010 11:30:06 +0000 (08:30 -0300)]
[media] hdpvr: print firmware date

Hauppauge released different firmwares using the same version number.
The firmware date can be used to identify the exact driver/firmware
combination.

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] hdpvr: remove unecessary sleep in buffer drain loop
Alan Young [Mon, 26 Jul 2010 19:27:32 +0000 (16:27 -0300)]
[media] hdpvr: remove unecessary sleep in buffer drain loop

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] hdpvr: remove unnecessary sleep in hdpvr_config_call
Alan Young [Mon, 26 Jul 2010 11:17:53 +0000 (08:17 -0300)]
[media] hdpvr: remove unnecessary sleep in hdpvr_config_call

Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] hdpvr: Add missing URB_NO_TRANSFER_DMA_MAP flag
James M McLaren [Sun, 3 Oct 2010 22:09:18 +0000 (19:09 -0300)]
[media] hdpvr: Add missing URB_NO_TRANSFER_DMA_MAP flag

Necessary on arm.

Signed-off-by: Janne Grunau <j@jannau.net>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] V4L2: Add seek spacing and RDS CAP bits
Matti Aaltonen [Thu, 7 Oct 2010 13:16:11 +0000 (10:16 -0300)]
[media] V4L2: Add seek spacing and RDS CAP bits

Add spacing field to v4l2_hw_freq_seek.

Add V4L2_TUNER_CAP_RDS_BLOCK_IO, which indicates that the tuner/
transmitter if capable of transmitting/receiving RDS blocks.

Add V4L2_TUNER_CAP_RDS_CONTROLS capability, which indicates that the
RDS data is handled as values of predefined controls like radio text,
program ID and so on.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] DiSEqC bug fixed for stv0288 based interfaces
Malcolm Priestley [Sun, 26 Sep 2010 18:16:20 +0000 (15:16 -0300)]
[media] DiSEqC bug fixed for stv0288 based interfaces

Fixed problem with DiSEqC communication. The message was wrongly modulated,
so the DiSEqC switch was not work.

This patch fixes DiSEqC messages, simple tone burst and tone on/off.
I verified it with osciloscope against the DiSEqC documentation.

Interface: PCI DVB-S TV tuner TeVii S420
Kernel: 2.6.32-24-generic (UBUNTU 10.4)

Signed-off-by: Josef Pavlik <josef@pavlik.it>
Tested-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] dvb: mantis: use '%pM' format to print MAC address
Andy Shevchenko [Sat, 11 Sep 2010 17:33:27 +0000 (14:33 -0300)]
[media] dvb: mantis: use '%pM' format to print MAC address

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] v4l: videobuf: remove unused is_userptr variable
Pawel Osciak [Mon, 6 Sep 2010 06:53:48 +0000 (03:53 -0300)]
[media] v4l: videobuf: remove unused is_userptr variable

Remove unused is_userptr variable from videobuf-dma-contig.

Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] Twinhan 1027 + IR Port support
Sergey Ivanov [Mon, 9 Aug 2010 13:18:32 +0000 (10:18 -0300)]
[media] Twinhan 1027 + IR Port support

Patch add support of TwinHan 1027 DVB-S card.

Refreshed version of https://patchwork.kernel.org/patch/79753/ patch.
(adapted for the new IR system), still works.

DVB-S support come from a patch originally authored by
Manu Abraham (abraham.manu@gmail.com).
IR Port support were added by Sergey.

Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] gspca - mars: Add illuminator controls
Jean-François Moine [Sat, 16 Oct 2010 17:12:53 +0000 (14:12 -0300)]
[media] gspca - mars: Add illuminator controls

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] gspca - mars: Propagate USB errors to higher level
Jean-François Moine [Sat, 16 Oct 2010 17:10:59 +0000 (14:10 -0300)]
[media] gspca - mars: Propagate USB errors to higher level

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] gspca - mars: Use the new video control mechanism
Jean-François Moine [Sat, 16 Oct 2010 17:07:06 +0000 (14:07 -0300)]
[media] gspca - mars: Use the new video control mechanism

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] gspca - main: Have discontinuous sequence numbers when frames are lost
Jean-François Moine [Sat, 16 Oct 2010 16:59:13 +0000 (13:59 -0300)]
[media] gspca - main: Have discontinuous sequence numbers when frames are lost

This patch also sets to 0 the sequence of the first frame.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] Add driver for Siliconfile SR030PC30 VGA camera
Sylwester Nawrocki [Mon, 11 Oct 2010 16:33:57 +0000 (13:33 -0300)]
[media] Add driver for Siliconfile SR030PC30 VGA camera

Add an I2C/v4l2-subdev driver for Siliconfile SR030PC30 VGA
camera sensor with Image Signal Processor. SR030PC30 is
the low resolution camera sensor on Samsung Aquila boards.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] s5p-fimc: Add suport for FIMC on S5PC210 SoCs
Sylwester Nawrocki [Mon, 11 Oct 2010 16:19:27 +0000 (13:19 -0300)]
[media] s5p-fimc: Add suport for FIMC on S5PC210 SoCs

Enable FIMC operation on S5PC210 (S5PV310) SoCs. This a minimal
adaptation to obtain functionality of older FIMC IP revisions
(S5PC100, S5PC110) on S5PC210 SOcs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] s5p-fimc: Add camera capture support
Sylwester Nawrocki [Thu, 7 Oct 2010 13:06:16 +0000 (10:06 -0300)]
[media] s5p-fimc: Add camera capture support

Add a video device driver per each FIMC entity to support
the camera capture input mode. Video capture node is registered
only if CCD sensor data is provided through driver's platfrom data
and board setup code.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] s5p-fimc: Do not lock both buffer queues in s_fmt
Sylwester Nawrocki [Tue, 28 Sep 2010 17:19:26 +0000 (14:19 -0300)]
[media] s5p-fimc: Do not lock both buffer queues in s_fmt

It is not necessary to lock both capture and output buffer queue while
setting format for single queue.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] s5p-fimc: Fix 90/270 deg rotation errors
Sylwester Nawrocki [Fri, 8 Oct 2010 08:01:22 +0000 (05:01 -0300)]
[media] s5p-fimc: Fix 90/270 deg rotation errors

Due to errorneous swapping of image dimensions the rotation
control was not handled properly in subsequent calls.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] s5p-fimc: mem2mem driver refactoring and cleanup
Sylwester Nawrocki [Fri, 8 Oct 2010 08:01:14 +0000 (05:01 -0300)]
[media] s5p-fimc: mem2mem driver refactoring and cleanup

Register access functions refactored for camera capture interface
control. Removed the workqueue since it was only useful for FIFO
output mode which is not supported at this time.
Fixed errors on module unload. Comments and whitespace cleanup.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] s5p-fimc: Register definition cleanup
Sylwester Nawrocki [Tue, 28 Sep 2010 08:49:11 +0000 (05:49 -0300)]
[media] s5p-fimc: Register definition cleanup

Add MIPI CSI format definitions, prepare DMA address
definitions for interlaced input frame mode.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] V4L: sh_mobile_ceu_camera: use default .get_parm() and .set_parm() operations
Guennadi Liakhovetski [Wed, 6 Oct 2010 07:04:10 +0000 (04:04 -0300)]
[media] V4L: sh_mobile_ceu_camera: use default .get_parm() and .set_parm() operations

No need to duplicate default .get_parm() and .set_parm() operations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] V4L: add an IMX074 sensor soc-camera / v4l2-subdev driver
Guennadi Liakhovetski [Tue, 5 Oct 2010 15:33:25 +0000 (12:33 -0300)]
[media] V4L: add an IMX074 sensor soc-camera / v4l2-subdev driver

This patch adds an initial driver for the IMXъ74 image sensor from Sony.
Lacking documentation, only very basic functionality in one specific image
format has been implemented and tested.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] V4L: add IMX074 sensor chip ID
Guennadi Liakhovetski [Tue, 5 Oct 2010 15:32:41 +0000 (12:32 -0300)]
[media] V4L: add IMX074 sensor chip ID

Chip identification register contains the value 0x74.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] SoC Camera: add support for g_parm / s_parm operations
Janusz Krzysztofik [Sat, 11 Sep 2010 01:26:16 +0000 (22:26 -0300)]
[media] SoC Camera: add support for g_parm / s_parm operations

This patch adds support for g_parm / s_parm operations to the SoC Camera
framework. It is usefull for checking/setting camera frame rate.

Example usage can be found in the previous patch from this series,
"SoC Camera: add driver for OV6650 sensor".

Created and tested against linux-2.6.36-rc3 on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] SoC Camera: add driver for OV6650 sensor
Janusz Krzysztofik [Tue, 5 Oct 2010 14:52:45 +0000 (11:52 -0300)]
[media] SoC Camera: add driver for OV6650 sensor

This patch provides a V4L2 SoC Camera driver for OV6650 camera sensor, found
on OMAP1 SoC based Amstrad Delta videophone.

Since I have no experience with camera sensors, and the sensor documentation I
was able to find was not very comprehensive, I left most settings at their
default (reset) values, except for:
- those required for proper mediabus parameters and picture geometry and
  format setup,
- those used by controls.
Resulting picture quality may be far from perfect, but better than nothing.

In order to be able to get / set the sensor frame rate from userspace, I
decided to provide two not yet SoC camera supported operations, g_parm and
s_parm. These can be used after applying patch 4/6 from this series,
"SoC Camera: add support for g_parm / s_parm operations".

Created and tested against linux-2.6.36-rc5 on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] SoC Camera: add driver for OMAP1 camera interface
Janusz Krzysztofik [Thu, 30 Sep 2010 11:35:49 +0000 (08:35 -0300)]
[media] SoC Camera: add driver for OMAP1 camera interface

This is a V4L2 driver for TI OMAP1 SoC camera interface.

Both videobuf-dma versions are supported, contig and sg, selectable with a
module option. The former uses less processing power, but often fails to
allocate contignuous buffer memory. The latter is free of this problem, but
generates tens of DMA interrupts per frame. If contig memory allocation ever
fails, the driver falls back to sg automatically on next open, but still can
be switched back to contig manually. Both paths work stable for me, even
under heavy load, on my OMAP1510 based Amstrad Delta videophone, that is the
oldest, least powerfull OMAP1 implementation.

The interface generally works in pass-through mode. Since input data byte
endianess can be swapped, it provides up to two v4l2 pixel formats per each of
several soc_mbus formats that have their swapped endian counterparts.

Boards using this driver can provide it with the following platform data:
- if and what freqency clock is expected by an on-board camera sensor,
- what is the maximum pixel clock that should be accepted from the sensor,
- what is the polarity of the sensor provided pixel clock,
- if the interface GPIO line is connected to a sensor reset/powerdown input
  and what is the input polarity.

Created and tested against linux-2.6.36-rc5 on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] v4l2-mediabus: Add pixelcodes for BGR565 formats
Sascha Hauer [Tue, 3 Aug 2010 10:57:47 +0000 (07:57 -0300)]
[media] v4l2-mediabus: Add pixelcodes for BGR565 formats

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] mt9m111: changed MIN_DARK_COLS to MT9M131 spec count
Michael Grzeschik [Tue, 3 Aug 2010 10:57:43 +0000 (07:57 -0300)]
[media] mt9m111: changed MIN_DARK_COLS to MT9M131 spec count

Signed-off-by: Philipp Wiesner <p.wiesner@phytec.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: Removed use of the BKL
Steven Toth [Thu, 7 Oct 2010 00:52:22 +0000 (21:52 -0300)]
[media] saa7164: Removed use of the BKL

Remove usage of the BKL and instead used video_set_drvdata() during
open fops.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: Remove V4L2_CAP_STREAMING capability flag
Steven Toth [Thu, 7 Oct 2010 00:50:55 +0000 (21:50 -0300)]
[media] saa7164: Remove V4L2_CAP_STREAMING capability flag

Remove V4L2_CAP_STREAMING capability flag, we don't support
the ioctls. It breaks VLC otherwise.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] Fix the -E{*} returns in the VBI device as well
Gavin Hurlbut [Thu, 30 Sep 2010 21:21:20 +0000 (18:21 -0300)]
[media] Fix the -E{*} returns in the VBI device as well

Signed-off-by: Gavin Hurlbut <gjhurlbu@gmail.com>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] Fix the negative -E{BLAH} returns from fops_read
Gavin Hurlbut [Wed, 29 Sep 2010 18:18:20 +0000 (15:18 -0300)]
[media] Fix the negative -E{BLAH} returns from fops_read

Signed-off-by: Gavin Hurlbut <gjhurlbu@gmail.com>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] Change the second input names to include " 2" to distinguish them
Gavin Hurlbut [Tue, 28 Sep 2010 02:50:43 +0000 (23:50 -0300)]
[media] Change the second input names to include " 2" to distinguish them

Signed-off-by: Gavin Hurlbut <gjhurlbu@gmail.com>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7134: Fix lots os spaces at the wrong places
Mauro Carvalho Chehab [Mon, 11 Oct 2010 20:39:06 +0000 (17:39 -0300)]
[media] saa7134: Fix lots os spaces at the wrong places

There are lots of checkpatch complains about:

ERROR: space prohibited after that open parenthesis '('
ERROR: space prohibited after that open square bracket '['
ERROR: space prohibited before that close parenthesis ')'
ERROR: space prohibited before that close square bracket ']'

This script should fix all of them:

for i in drivers/media/video/saa7164/*.[ch]; do cat $i|perl -ne 's/\[\ +(.*)/[$1/; s/\ +\]/$1\]/g; s/\(\ +(.*)/($1/g; s/\ +\)/$1)/g; print $_;' >a && mv a $i; done

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: Don't use typedefs
Mauro Carvalho Chehab [Mon, 11 Oct 2010 20:17:45 +0000 (17:17 -0300)]
[media] saa7164: Don't use typedefs

According with CodingStyle, drivers shouldn't use typedef, except on very
special cases. This is not the case of saa7164. So, convert all usecases
to struct/enum.

After changing the saa7164-types.h, all we need to do is to run those scripts
to fix all occurrences of the bad types and double check/fix everything that
might be broken after the test (of course, I did a small script to generate those scripts).

for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmBusType_t/enum tmBusType/; print " \>a \&\& mv a tmBusType; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResCmd_t/enum tmComResCmd/; print " \>a \&\& mv a tmComResCmd; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResTermType_t/enum tmComResTermType/; print " \>a \&\& mv a tmComResTermType; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmBufferFlag_t/enum tmBufferFlag/; print " \>a \&\& mv a tmBufferFlag; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResHWDescr_t/struct tmComResHWDescr/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResInterfaceDescr_t/struct tmComResInterfaceDescr/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResBusDescr_t/struct tmComResBusDescr/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmBusType_t/struct tmBusType/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResBusInfo_t/struct tmComResBusInfo/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResInfo_t/struct tmComResInfo/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResCmd_t/struct tmComResCmd/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmDescriptor_t/struct tmDescriptor/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResDescrHeader_t/struct tmComResDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResExtDevDescrHeader_t/struct tmComResExtDevDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResGPIO_t/struct tmComResGPIO/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResPathDescrHeader_t/struct tmComResPathDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResTermType_t/struct tmComResTermType/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResAntTermDescrHeader_t/struct tmComResAntTermDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResTunerDescrHeader_t/struct tmComResTunerDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmBufferFlag_t/struct tmBufferFlag/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmBuffer_t/struct tmBuffer/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmHWStreamParameters_t/struct tmHWStreamParameters/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmStreamParameters_t/struct tmStreamParameters/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResDMATermDescrHeader_t/struct tmComResDMATermDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResTSFormatDescrHeader_t/struct tmComResTSFormatDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResSelDescrHeader_t/struct tmComResSelDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResProcDescrHeader_t/struct tmComResProcDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResEncVideoBitRate_t/struct tmComResEncVideoBitRate/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResEncVideoInputAspectRatio_t/struct tmComResEncVideoInputAspectRatio/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResEncVideoGopStructure_t/struct tmComResEncVideoGopStructure/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResEncoderDescrHeader_t/struct tmComResEncoderDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResAFeatureDescrHeader_t/struct tmComResAFeatureDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResAudioDefaults_t/struct tmComResAudioDefaults/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResEncAudioBitRate_t/struct tmComResEncAudioBitRate/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResTunerStandard_t/struct tmComResTunerStandard/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResTunerStandardAuto_t/struct tmComResTunerStandardAuto/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResPSFormatDescrHeader_t/struct tmComResPSFormatDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResVBIFormatDescrHeader_t/struct tmComResVBIFormatDescrHeader/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResProbeCommit_t/struct tmComResProbeCommit/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResDebugSetLevel_t/struct tmComResDebugSetLevel/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmComResDebugGetData_t/struct tmComResDebugGetData/g; print " $i >a && mv a $i; done
for i in drivers/media/video/saa7164/*.[ch]; do perl -ne "s/tmFwInfoStruct_t/struct tmFwInfoStruct/g; print " $i >a && mv a $i; done

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: fix a warning at some printk's on i386
Mauro Carvalho Chehab [Mon, 11 Oct 2010 19:26:04 +0000 (16:26 -0300)]
[media] saa7164: fix a warning at some printk's on i386

drivers/media/video/saa7164/saa7164-buffer.c: In function ‘saa7164_buffer_display’:
drivers/media/video/saa7164/saa7164-buffer.c:76: warning: cast to pointer from integer of different size
drivers/media/video/saa7164/saa7164-buffer.c:78: warning: cast to pointer from integer of different size

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: Disable firmware debug message output
Steven Toth [Tue, 28 Sep 2010 01:36:40 +0000 (22:36 -0300)]
[media] saa7164: Disable firmware debug message output

... Also disable collection of messages via kernel thread.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: Remove loud debugging during video_poll()
Steven Toth [Sun, 5 Sep 2010 17:49:15 +0000 (14:49 -0300)]
[media] saa7164: Remove loud debugging during video_poll()

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: bugfix, avoid oops when driver unloads without firmware
Steven Toth [Sun, 5 Sep 2010 14:24:50 +0000 (11:24 -0300)]
[media] saa7164: bugfix, avoid oops when driver unloads without firmware

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: saa7164-buffer.c line 274 bugfix
Steven Toth [Sun, 5 Sep 2010 12:49:43 +0000 (09:49 -0300)]
[media] saa7164: saa7164-buffer.c line 274 bugfix

Mark buffers free when the dvb dma engine stops.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: Some whitespace cleanup
Steven Toth [Sat, 31 Jul 2010 19:51:23 +0000 (16:51 -0300)]
[media] saa7164: Some whitespace cleanup

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: fix vbi compiler warnings
Steven Toth [Sat, 31 Jul 2010 19:34:58 +0000 (16:34 -0300)]
[media] saa7164: fix vbi compiler warnings

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: change debug to saa_debug
Steven Toth [Sat, 31 Jul 2010 19:24:25 +0000 (16:24 -0300)]
[media] saa7164: change debug to saa_debug

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: monitor the RISC cpu load via a thread
Steven Toth [Sat, 31 Jul 2010 19:18:35 +0000 (16:18 -0300)]
[media] saa7164: monitor the RISC cpu load via a thread

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: collect/show the firmware debugging via a thread
Steven Toth [Sat, 31 Jul 2010 19:17:51 +0000 (16:17 -0300)]
[media] saa7164: collect/show the firmware debugging via a thread

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: enforce the march 10th firmware is used
Steven Toth [Sat, 31 Jul 2010 19:16:29 +0000 (16:16 -0300)]
[media] saa7164: enforce the march 10th firmware is used

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: Monitor the command bus and check for inconsistencies
Steven Toth [Sat, 31 Jul 2010 19:15:22 +0000 (16:15 -0300)]
[media] saa7164: Monitor the command bus and check for inconsistencies

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: VBI irq cleanup and V4L VBI raw pitch adjustments
Steven Toth [Sat, 31 Jul 2010 19:10:02 +0000 (16:10 -0300)]
[media] saa7164: VBI irq cleanup and V4L VBI raw pitch adjustments

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: add firmware debug message collection and procfs changes
Steven Toth [Sat, 31 Jul 2010 19:08:52 +0000 (16:08 -0300)]
[media] saa7164: add firmware debug message collection and procfs changes

Check for PROCFS and dynamically adjust code.
Cache some PCIe values in the device context.
Provide a mechanism to collect the debug messages
coming from the firmware.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: add NTSC VBI support
Steven Toth [Sat, 31 Jul 2010 19:06:06 +0000 (16:06 -0300)]
[media] saa7164: add NTSC VBI support

IRQ handlers, firmware messages, deferred queue handlers, V4L api's
etc.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: Add missing saa7164-vbi.c file
Steven Toth [Sat, 31 Jul 2010 19:34:19 +0000 (16:34 -0300)]
[media] saa7164: Add missing saa7164-vbi.c file

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: rename a structure for readability
Steven Toth [Sat, 31 Jul 2010 19:04:59 +0000 (16:04 -0300)]
[media] saa7164: rename a structure for readability

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: Avoid spurious error after firmware starts
Steven Toth [Sat, 31 Jul 2010 19:03:55 +0000 (16:03 -0300)]
[media] saa7164: Avoid spurious error after firmware starts

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: New firmware changes, new size, new filename
Steven Toth [Sat, 31 Jul 2010 19:02:41 +0000 (16:02 -0300)]
[media] saa7164: New firmware changes, new size, new filename

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: allow DMA engine buffers to vary in size between analog and digital
Steven Toth [Sat, 31 Jul 2010 19:01:00 +0000 (16:01 -0300)]
[media] saa7164: allow DMA engine buffers to vary in size between analog and digital

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: code cleanup
Steven Toth [Sat, 31 Jul 2010 18:55:22 +0000 (15:55 -0300)]
[media] saa7164: code cleanup

Removed some previous debugging code, whitespace cleanup and
spurious comments.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: irqhandler cleanup and helper function added
Steven Toth [Sat, 31 Jul 2010 18:49:28 +0000 (15:49 -0300)]
[media] saa7164: irqhandler cleanup and helper function added

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: mundane buffer debugging changes to track issues
Steven Toth [Sat, 31 Jul 2010 18:29:34 +0000 (15:29 -0300)]
[media] saa7164: mundane buffer debugging changes to track issues

Code is removed in future patches in this set.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: Implement resolution control firmware command
Steven Toth [Sat, 31 Jul 2010 18:28:18 +0000 (15:28 -0300)]
[media] saa7164: Implement resolution control firmware command

.. also fix a minor line 80 wrapping coding style issue.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: adjust the PS pack size handling to fill buffers 100%
Steven Toth [Sat, 31 Jul 2010 18:27:01 +0000 (15:27 -0300)]
[media] saa7164: adjust the PS pack size handling to fill buffers 100%

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: buffer crc checks and ensure we use the memcpy func
Steven Toth [Sat, 31 Jul 2010 18:13:45 +0000 (15:13 -0300)]
[media] saa7164: buffer crc checks and ensure we use the memcpy func

Buffer crc checks and ensure we use the correct PCIe IO memcpy func

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: add guard bytes around critical buffers to detect failure
Steven Toth [Sat, 31 Jul 2010 18:11:59 +0000 (15:11 -0300)]
[media] saa7164: add guard bytes around critical buffers to detect failure

If the guard bytes are trampled then we have a memory related problem.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: measure via histograms various irq and queue latencies
Steven Toth [Sat, 31 Jul 2010 18:10:52 +0000 (15:10 -0300)]
[media] saa7164: measure via histograms various irq and queue latencies

saa7164: measure via histograms various irq and queue latencies
Attempting to determine where buffering issues under high load are due
to highly latent irq or work queue handling.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: allow the number of encoder buffers to be user configurable
Steven Toth [Sat, 31 Jul 2010 18:09:25 +0000 (15:09 -0300)]
[media] saa7164: allow the number of encoder buffers to be user configurable

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: patches to monitor TS payload for inconsistencies
Steven Toth [Sat, 31 Jul 2010 18:06:49 +0000 (15:06 -0300)]
[media] saa7164: patches to monitor TS payload for inconsistencies

... and report errors to console. (Debugging a DMA buffering issue).
These are made optional in later patches.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: allow variable length GOP sizes and switch encoder default to CBR
Steven Toth [Sat, 31 Jul 2010 18:05:35 +0000 (15:05 -0300)]
[media] saa7164: allow variable length GOP sizes and switch encoder default to CBR

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: allow encoder output format to be user configurable
Steven Toth [Sat, 31 Jul 2010 18:03:31 +0000 (15:03 -0300)]
[media] saa7164: allow encoder output format to be user configurable

Allow PS and TS.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: implement encoder peak bitrate feature
Steven Toth [Sat, 31 Jul 2010 17:59:38 +0000 (14:59 -0300)]
[media] saa7164: implement encoder peak bitrate feature

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: allow the IBP reference distance to be configurable
Steven Toth [Sat, 31 Jul 2010 17:58:35 +0000 (14:58 -0300)]
[media] saa7164: allow the IBP reference distance to be configurable

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
14 years ago[media] saa7164: add support for encoder CBR and VBR optionally
Steven Toth [Sat, 31 Jul 2010 17:51:30 +0000 (14:51 -0300)]
[media] saa7164: add support for encoder CBR and VBR optionally

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>