Mika Westerberg [Tue, 29 Oct 2019 17:00:22 +0000 (20:00 +0300)]
PCI: pciehp: Prevent deadlock on disconnect
[ Upstream commit
87d0f2a5536fdf5053a6d341880f96135549a644 ]
This addresses deadlocks in these common cases in hierarchies containing
two switches:
- All involved ports are runtime suspended and they are unplugged. This
can happen easily if the drivers involved automatically enable runtime
PM (xHCI for example does that).
- System is suspended (e.g., closing the lid on a laptop) with a dock +
something else connected, and the dock is unplugged while suspended.
These cases lead to the following deadlock:
INFO: task irq/126-pciehp:198 blocked for more than 120 seconds.
irq/126-pciehp D 0 198 2 0x80000000
Call Trace:
schedule+0x2c/0x80
schedule_timeout+0x246/0x350
wait_for_completion+0xb7/0x140
kthread_stop+0x49/0x110
free_irq+0x32/0x70
pcie_shutdown_notification+0x2f/0x50
pciehp_remove+0x27/0x50
pcie_port_remove_service+0x36/0x50
device_release_driver+0x12/0x20
bus_remove_device+0xec/0x160
device_del+0x13b/0x350
device_unregister+0x1a/0x60
remove_iter+0x1e/0x30
device_for_each_child+0x56/0x90
pcie_port_device_remove+0x22/0x40
pcie_portdrv_remove+0x20/0x60
pci_device_remove+0x3e/0xc0
device_release_driver_internal+0x18c/0x250
device_release_driver+0x12/0x20
pci_stop_bus_device+0x6f/0x90
pci_stop_bus_device+0x31/0x90
pci_stop_and_remove_bus_device+0x12/0x20
pciehp_unconfigure_device+0x88/0x140
pciehp_disable_slot+0x6a/0x110
pciehp_handle_presence_or_link_change+0x263/0x400
pciehp_ist+0x1c9/0x1d0
irq_thread_fn+0x24/0x60
irq_thread+0xeb/0x190
kthread+0x120/0x140
INFO: task irq/190-pciehp:2288 blocked for more than 120 seconds.
irq/190-pciehp D 0 2288 2 0x80000000
Call Trace:
__schedule+0x2a2/0x880
schedule+0x2c/0x80
schedule_preempt_disabled+0xe/0x10
mutex_lock+0x2c/0x30
pci_lock_rescan_remove+0x15/0x20
pciehp_unconfigure_device+0x4d/0x140
pciehp_disable_slot+0x6a/0x110
pciehp_handle_presence_or_link_change+0x263/0x400
pciehp_ist+0x1c9/0x1d0
irq_thread_fn+0x24/0x60
irq_thread+0xeb/0x190
kthread+0x120/0x140
What happens here is that the whole hierarchy is runtime resumed and the
parent PCIe downstream port, which got the hot-remove event, starts
removing devices below it, taking pci_lock_rescan_remove() lock. When the
child PCIe port is runtime resumed it calls pciehp_check_presence() which
ends up calling pciehp_card_present() and pciehp_check_link_active(). Both
of these use pcie_capability_read_word(), which notices that the underlying
device is already gone and returns PCIBIOS_DEVICE_NOT_FOUND with the
capability value set to 0. When pciehp gets this value it thinks that its
child device is also hot-removed and schedules its IRQ thread to handle the
event.
The deadlock happens when the child's IRQ thread runs and tries to acquire
pci_lock_rescan_remove() which is already taken by the parent and the
parent waits for the child's IRQ thread to finish.
Prevent this from happening by checking the return value of
pcie_capability_read_word() and if it is PCIBIOS_DEVICE_NOT_FOUND stop
performing any hot-removal activities.
[bhelgaas: add common scenarios to commit log]
Link: https://lore.kernel.org/r/20191029170022.57528-2-mika.westerberg@linux.intel.com
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aurelien Jarno [Sun, 1 Dec 2019 19:57:28 +0000 (20:57 +0100)]
libbpf: Fix readelf output parsing on powerpc with recent binutils
[ Upstream commit
3464afdf11f9a1e031e7858a05351ceca1792fea ]
On powerpc with recent versions of binutils, readelf outputs an extra
field when dumping the symbols of an object file. For example:
35:
0000000000000838 96 FUNC LOCAL DEFAULT [<localentry>: 8] 1 btf_is_struct
The extra "[<localentry>: 8]" prevents the GLOBAL_SYM_COUNT variable to
be computed correctly and causes the check_abi target to fail.
Fix that by looking for the symbol name in the last field instead of the
8th one. This way it should also cope with future extra fields.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/bpf/20191201195728.4161537-1-aurelien@aurel32.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mika Westerberg [Tue, 12 Nov 2019 09:16:16 +0000 (12:16 +0300)]
PCI/PM: Add pcie_wait_for_link_delay()
[ Upstream commit
4827d63891b6a839dac49c6ab62e61c4b011c4f2 ]
Add pcie_wait_for_link_delay(). Similar to pcie_wait_for_link() but allows
passing custom activation delay in milliseconds.
Link: https://lore.kernel.org/r/20191112091617.70282-2-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yongqiang Sun [Mon, 9 Mar 2020 21:13:02 +0000 (17:13 -0400)]
drm/amd/display: Not doing optimize bandwidth if flip pending.
[ Upstream commit
9941b8129030c9202aaf39114477a0e58c0d6ffc ]
[Why]
In some scenario like 1366x768 VSR enabled connected with a 4K monitor
and playing 4K video in clone mode, underflow will be observed due to
decrease dppclk when previouse surface scan isn't finished
[How]
In this use case, surface flip is switching between 4K and 1366x768,
1366x768 needs smaller dppclk, and when decrease the clk and previous
surface scan is for 4K and scan isn't done, underflow will happen. Not
doing optimize bandwidth in case of flip pending.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mathias Nyman [Thu, 12 Mar 2020 14:45:16 +0000 (16:45 +0200)]
xhci: Finetune host initiated USB3 rootport link suspend and resume
[ Upstream commit
ceca49382ac20e06ce04c21279c7f2868c4ec1d4 ]
Depending on the current link state the steps to resume the link to U0
varies. The normal case when a port is suspended (U3) we set the link
to U0 and wait for a port event when U3exit completed and port moved to
U0.
If the port is in U1/U2, then no event is issued, just set link to U0
If port is in Resume or Recovery state then the device has already
initiated resume, and this host initiated resume is racing against it.
Port event handler for device initiated resume will set link to U0,
just wait for the port to reach U0 before returning.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Thu, 12 Mar 2020 14:45:15 +0000 (16:45 +0200)]
xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0
[ Upstream commit
0200b9f790b0fc9e9a42f685f5ad54b23fe959f4 ]
Like U3 case, xHCI spec doesn't specify the upper bound of U0 transition
time. The 20ms is not enough for some devices.
Intead of polling PLS or PLC, we can facilitate the port change event to
know that the link transits to U0 is completed.
While at it, also separate U0 and U3 case to make the code cleaner.
[variable rename to u3exit, and skip completion for usb2 ports -Mathias ]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Thu, 12 Mar 2020 14:45:14 +0000 (16:45 +0200)]
xhci: Ensure link state is U3 after setting USB_SS_PORT_LS_U3
[ Upstream commit
eb002726fac7cefb98ff39ddb89e150a1c24fe85 ]
The xHCI spec doesn't specify the upper bound of U3 transition time. For
some devices 20ms is not enough, so we need to make sure the link state
is in U3 before further actions.
I've tried to use U3 Entry Capability by setting U3 Entry Enable in
config register, however the port change event for U3 transition
interrupts the system suspend process.
For now let's use the less ideal method by polling PLS.
[use usleep_range(), and shorten the delay time while polling -Mathias]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
František Kučera [Wed, 1 Apr 2020 09:59:07 +0000 (11:59 +0200)]
ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk
[ Upstream commit
73d8c94084341e2895169a0462dbc18167f01683 ]
Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE.
Input is not working.
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://lore.kernel.org/r/20200401095907.3387-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sun, 5 Apr 2020 13:37:26 +0000 (15:37 +0200)]
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet
[ Upstream commit
c8b78f24c1247b7bd0882885c672d9dec5800bc6 ]
The MPMAN MPWIN895CL tablet almost fully works with out default settings.
The only problem is that it has only 1 speaker so any sounds only playing
on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200405133726.24154-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Kazlauskas [Sun, 5 Apr 2020 20:40:57 +0000 (16:40 -0400)]
drm/amd/display: Calculate scaling ratios on every medium/full update
[ Upstream commit
3bae20137cae6c03f58f96c0bc9f3d46f0bc17d4 ]
[Why]
If a plane isn't being actively enabled or disabled then DC won't
always recalculate scaling rects and ratios for the primary plane.
This results in only a partial or corrupted rect being displayed on
the screen instead of scaling to fit the screen.
[How]
Add back the logic to recalculate the scaling rects into
dc_commit_updates_for_stream since this is the expected place to
do it in DC.
This was previously removed a few years ago to fix an underscan issue
but underscan is still functional now with this change - and it should
be, since this is only updating to the latest plane state getting passed
in.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Olsa [Tue, 7 Apr 2020 14:14:27 +0000 (16:14 +0200)]
perf/core: Disable page faults when getting phys address
[ Upstream commit
d3296fb372bf7497b0e5d0478c4e7a677ec6f6e9 ]
We hit following warning when running tests on kernel
compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y:
WARNING: CPU: 19 PID: 4472 at mm/gup.c:2381 __get_user_pages_fast+0x1a4/0x200
CPU: 19 PID: 4472 Comm: dummy Not tainted 5.6.0-rc6+ #3
RIP: 0010:__get_user_pages_fast+0x1a4/0x200
...
Call Trace:
perf_prepare_sample+0xff1/0x1d90
perf_event_output_forward+0xe8/0x210
__perf_event_overflow+0x11a/0x310
__intel_pmu_pebs_event+0x657/0x850
intel_pmu_drain_pebs_nhm+0x7de/0x11d0
handle_pmi_common+0x1b2/0x650
intel_pmu_handle_irq+0x17b/0x370
perf_event_nmi_handler+0x40/0x60
nmi_handle+0x192/0x590
default_do_nmi+0x6d/0x150
do_nmi+0x2f9/0x3c0
nmi+0x8e/0xd7
While __get_user_pages_fast() is IRQ-safe, it calls access_ok(),
which warns on:
WARN_ON_ONCE(!in_task() && !pagefault_disabled())
Peter suggested disabling page faults around __get_user_pages_fast(),
which gets rid of the warning in access_ok() call.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200407141427.3184722-1-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Mon, 3 Feb 2020 21:35:35 +0000 (13:35 -0800)]
pwm: bcm2835: Dynamically allocate base
[ Upstream commit
2c25b07e5ec119cab609e41407a1fb3fa61442f5 ]
The newer 2711 and 7211 chips have two PWM controllers and failure to
dynamically allocate the PWM base would prevent the second PWM
controller instance being probed for succeeding with an -EEXIST error
from alloc_pwms().
Fixes:
e5a06dc5ac1f ("pwm: Add BCM2835 PWM driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 16 Mar 2020 10:32:15 +0000 (11:32 +0100)]
pwm: renesas-tpu: Fix late Runtime PM enablement
[ Upstream commit
d5a3c7a4536e1329a758e14340efd0e65252bd3d ]
Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should always be disabled after the removal of the
PWM chip, even if the latter failed.
Fixes:
99b82abb0a35b073 ("pwm: Add Renesas TPU PWM driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nick Bowler [Sat, 28 Mar 2020 05:09:09 +0000 (01:09 -0400)]
nvme: fix compat address handling in several ioctls
[ Upstream commit
c95b708d5fa65b4e51f088ee077d127fd5a57b70 ]
On a 32-bit kernel, the upper bits of userspace addresses passed via
various ioctls are silently ignored by the nvme driver.
However on a 64-bit kernel running a compat task, these upper bits are
not ignored and are in fact required to be zero for the ioctls to work.
Unfortunately, this difference matters. 32-bit smartctl submits the
NVME_IOCTL_ADMIN_CMD ioctl with garbage in these upper bits because it
seems the pointer value it puts into the nvme_passthru_cmd structure is
sign extended. This works fine on 32-bit kernels but fails on a 64-bit
one because (at least on my setup) the addresses smartctl uses are
consistently above 2G. For example:
# smartctl -x /dev/nvme0n1
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.11] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Bad address
Since changing 32-bit kernels to actually check all of the submitted
address bits now would break existing userspace, this patch fixes the
compat problem by explicitly zeroing the upper bits in the compat case.
This enables 32-bit smartctl to work on a 64-bit kernel.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ganesh Goudar [Fri, 20 Mar 2020 11:01:19 +0000 (16:31 +0530)]
powerpc/pseries: Fix MCE handling on pseries
[ Upstream commit
a95a0a1654f16366360399574e10efd87e867b39 ]
MCE handling on pSeries platform fails as recent rework to use common
code for pSeries and PowerNV in machine check error handling tries to
access per-cpu variables in realmode. The per-cpu variables may be
outside the RMO region on pSeries platform and needs translation to be
enabled for access. Just moving these per-cpu variable into RMO region
did'nt help because we queue some work to workqueues in real mode, which
again tries to touch per-cpu variables. Also fwnmi_release_errinfo()
cannot be called when translation is not enabled.
This patch fixes this by enabling translation in the exception handler
when all required real mode handling is done. This change only affects
the pSeries platform.
Without this fix below kernel crash is seen on injecting
SLB multihit:
BUG: Unable to handle kernel data access on read at 0xc00000027b205950
Faulting instruction address: 0xc00000000003b7e0
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: mcetest_slb(OE+) af_packet(E) xt_tcpudp(E) ip6t_rpfilter(E) ip6t_REJECT(E) ipt_REJECT(E) xt_conntrack(E) ip_set(E) nfnetlink(E) ebtable_nat(E) ebtable_broute(E) ip6table_nat(E) ip6table_mangle(E) ip6table_raw(E) ip6table_security(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) iptable_mangle(E) iptable_raw(E) iptable_security(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) xfs(E) ibmveth(E) vmx_crypto(E) gf128mul(E) uio_pdrv_genirq(E) uio(E) crct10dif_vpmsum(E) rtc_generic(E) btrfs(E) libcrc32c(E) xor(E) zstd_decompress(E) zstd_compress(E) raid6_pq(E) sr_mod(E) sd_mod(E) cdrom(E) ibmvscsi(E) scsi_transport_srp(E) crc32c_vpmsum(E) dm_mod(E) sg(E) scsi_mod(E)
CPU: 34 PID: 8154 Comm: insmod Kdump: loaded Tainted: G OE 5.5.0-mahesh #1
NIP:
c00000000003b7e0 LR:
c0000000000f2218 CTR:
0000000000000000
REGS:
c000000007dcb960 TRAP: 0300 Tainted: G OE (5.5.0-mahesh)
MSR:
8000000000001003 <SF,ME,RI,LE> CR:
28002428 XER:
20040000
CFAR:
c0000000000f2214 DAR:
c00000027b205950 DSISR:
40000000 IRQMASK: 0
GPR00:
c0000000000f2218 c000000007dcbbf0 c000000001544800 c000000007dcbd70
GPR04:
0000000000000001 c000000007dcbc98 c008000000d00258 c0080000011c0000
GPR08:
0000000000000000 0000000300000003 c000000001035950 0000000003000048
GPR12:
000000027a1d0000 c000000007f9c000 0000000000000558 0000000000000000
GPR16:
0000000000000540 c008000001110000 c008000001110540 0000000000000000
GPR20:
c00000000022af10 c00000025480fd70 c008000001280000 c00000004bfbb300
GPR24:
c000000001442330 c00800000800000d c008000008000000 4009287a77000510
GPR28:
0000000000000000 0000000000000002 c000000001033d30 0000000000000001
NIP [
c00000000003b7e0] save_mce_event+0x30/0x240
LR [
c0000000000f2218] pseries_machine_check_realmode+0x2c8/0x4f0
Call Trace:
Instruction dump:
3c4c0151 38429050 7c0802a6 60000000 fbc1fff0 fbe1fff8 f821ffd1 3d42ffaf
3fc2ffaf e98d0030 394a1150 3bdef530 <
7d6a62aa>
1d2b0048 2f8b0063 380b0001
---[ end trace
46fd63f36bbdd940 ]---
Fixes:
9ca766f9891d ("powerpc/64s/pseries: machine check convert to use common event code")
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200320110119.10207-1-ganeshgr@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Piggin [Thu, 2 Apr 2020 12:04:01 +0000 (22:04 +1000)]
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
[ Upstream commit
abc3fce76adbdfa8f87272c784b388cd20b46049 ]
This reverts commit
ebb37cf3ffd39fdb6ec5b07111f8bb2f11d92c5f.
That commit does not play well with soft-masked irq state
manipulations in idle, interrupt replay, and possibly others due to
tracing code sometimes using irq_work_queue (e.g., in
trace_hardirqs_on()). That can cause PACA_IRQ_DEC to become set when
it is not expected, and be ignored or cleared or cause warnings.
The net result seems to be missing an irq_work until the next timer
interrupt in the worst case which is usually not going to be noticed,
however it could be a long time if the tick is disabled, which is
against the spirit of irq_work and might cause real problems.
The idea is still solid, but it would need more work. It's not really
clear if it would be worth added complexity, so revert this for
now (not a straight revert, but replace with a comment explaining why
we might see interrupts happening, and gives git blame something to
find).
Fixes:
ebb37cf3ffd3 ("powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402120401.1115883-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evan Green [Fri, 3 Apr 2020 14:43:04 +0000 (16:43 +0200)]
loop: Better discard support for block devices
[ Upstream commit
c52abf563049e787c1341cdf15c7dbe1bfbc951b ]
If the backing device for a loop device is itself a block device,
then mirror the "write zeroes" capabilities of the underlying
block device into the loop device. Copy this capability into both
max_write_zeroes_sectors and max_discard_sectors of the loop device.
The reason for this is that REQ_OP_DISCARD on a loop device translates
into blkdev_issue_zeroout(), rather than blkdev_issue_discard(). This
presents a consistent interface for loop devices (that discarded data
is zeroed), regardless of the backing device type of the loop device.
There should be no behavior change for loop devices backed by regular
files.
This change fixes blktest block/003, and removes an extraneous
error print in block/013 when testing on a loop device backed
by a block device that does not support discard.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[used updated version of Evan's comment in loop_config_discard()]
[moved backingq to local scope, removed redundant braces]
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cornelia Huck [Fri, 27 Mar 2020 12:45:02 +0000 (13:45 +0100)]
s390/cio: avoid duplicated 'ADD' uevents
[ Upstream commit
05ce3e53f375295c2940390b2b429e506e07655c ]
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The io_subchannel driver will do so when the associated
ccw_device has been registered -- but unconditionally, so more
ADD uevents will be generated if a subchannel has been unbound
from the io_subchannel driver and later rebound.
To fix this, only generate the ADD event if uevents were still
suppressed for the device.
Fixes:
fa1a8c23eb7d ("s390: cio: Delay uevents for subchannels")
Message-Id: <
20200327124503.9794-2-cohuck@redhat.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cornelia Huck [Fri, 27 Mar 2020 12:45:03 +0000 (13:45 +0100)]
s390/cio: generate delayed uevent for vfio-ccw subchannels
[ Upstream commit
2bc55eaeb88d30accfc1b6ac2708d4e4b81ca260 ]
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The vfio-ccw I/O subchannel driver, however, did not
do that, and will not generate an ADD uevent for subchannels
that had not been bound to a different driver (or none at all,
which also triggers the uevent).
Generate the ADD uevent at the end of the probe function if
uevents were still suppressed for the device.
Message-Id: <
20200327124503.9794-3-cohuck@redhat.com>
Fixes:
63f1934d562d ("vfio: ccw: basic implementation for vfio_ccw driver")
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Thu, 26 Mar 2020 08:00:49 +0000 (17:00 +0900)]
lib/raid6/test: fix build on distros whose /bin/sh is not bash
[ Upstream commit
06bd48b6cd97ef3889b68c8e09014d81dbc463f1 ]
You can build a user-space test program for the raid6 library code,
like this:
$ cd lib/raid6/test
$ make
The command in $(shell ...) function is evaluated by /bin/sh by default.
(or, you can specify the shell by passing SHELL=<shell> from command line)
Currently '>&/dev/null' is used to sink both stdout and stderr. Because
this code is bash-ism, it only works when /bin/sh is a symbolic link to
bash (this is the case on RHEL etc.)
This does not work on Ubuntu where /bin/sh is a symbolic link to dash.
I see lots of
/bin/sh: 1: Syntax error: Bad fd number
and
warning "your version of binutils lacks ... support"
Replace it with portable '>/dev/null 2>&1'.
Fixes:
4f8c55c5ad49 ("lib/raid6: build proper files on corresponding arch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro Carvalho Chehab [Thu, 2 Apr 2020 09:28:03 +0000 (11:28 +0200)]
kconfig: qconf: Fix a few alignment issues
[ Upstream commit
60969f02f07ae1445730c7b293c421d179da729c ]
There are a few items with wrong alignments. Solve them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Averin [Fri, 10 Apr 2020 21:34:13 +0000 (14:34 -0700)]
ipc/util.c: sysvipc_find_ipc() should increase position index
[ Upstream commit
89163f93c6f969da5811af5377cc10173583123b ]
If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/b7a20945-e315-8bb0-21e6-3875c14a8494@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Biggers [Fri, 10 Apr 2020 21:33:53 +0000 (14:33 -0700)]
selftests: kmod: fix handling test numbers above 9
[ Upstream commit
6d573a07528308eb77ec072c010819c359bebf6e ]
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Averin [Fri, 10 Apr 2020 21:34:10 +0000 (14:34 -0700)]
kernel/gcov/fs.c: gcov_seq_next() should increase position index
[ Upstream commit
f4d74ef6220c1eda0875da30457bef5c7111ab06 ]
If seq_file .next function does not change position index, read after
some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Waiman Long <longman@redhat.com>
Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kishon Vijay Abraham I [Mon, 6 Apr 2020 05:28:36 +0000 (10:58 +0530)]
dma-direct: fix data truncation in dma_direct_get_required_mask()
[ Upstream commit
cdcda0d1f8f4ab84efe7cd9921c98364398aefd7 ]
The upper 32-bit physical address gets truncated inadvertently
when dma_direct_get_required_mask() invokes phys_to_dma_direct().
This results in dma_addressing_limited() return incorrect value
when used in platforms with LPAE enabled.
Fix it here by explicitly type casting 'max_pfn' to phys_addr_t
in order to prevent overflow of intermediate value while evaluating
'(max_pfn - 1) << PAGE_SHIFT'.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Isabel Zhang [Sun, 5 Apr 2020 20:41:01 +0000 (16:41 -0400)]
drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax
[ Upstream commit
346d8a0a3c91888a412c2735d69daa09c00f0203 ]
[Why]
After v_total_min and max are updated in vrr structure, the changes are
not reflected in stream adjust. When these values are read from stream
adjust it does not reflect the actual state of the system.
[How]
Set stream adjust values equal to vrr adjust values after vrr adjust
values are updated.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sagi Grimberg [Thu, 2 Apr 2020 16:34:54 +0000 (09:34 -0700)]
nvme: fix deadlock caused by ANA update wrong locking
[ Upstream commit
657f1975e9d9c880fa13030e88ba6cc84964f1db ]
The deadlock combines 4 flows in parallel:
- ns scanning (triggered from reconnect)
- request timeout
- ANA update (triggered from reconnect)
- I/O coming into the mpath device
(1) ns scanning triggers disk revalidation -> update disk info ->
freeze queue -> but blocked, due to (2)
(2) timeout handler reference the g_usage_counter - > but blocks in
the transport .timeout() handler, due to (3)
(3) the transport timeout handler (indirectly) calls nvme_stop_queue() ->
which takes the (down_read) namespaces_rwsem - > but blocks, due to (4)
(4) ANA update takes the (down_write) namespaces_rwsem -> calls
nvme_mpath_set_live() -> which synchronize the ns_head srcu
(see commit
504db087aacc) -> but blocks, due to (5)
(5) I/O came into nvme_mpath_make_request -> took srcu_read_lock ->
direct_make_request > blk_queue_enter -> but blocked, due to (1)
==> the request queue is under freeze -> deadlock.
The fix is making ANA update take a read lock as the namespaces list
is not manipulated, it is just the ns and ns->head that are being
updated (which is protected with the ns->head lock).
Fixes:
0d0b660f214dc ("nvme: add ANA support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Thu, 2 Apr 2020 18:53:57 +0000 (20:53 +0200)]
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
[ Upstream commit
81630dc042af998b9f58cd8e2c29dab9777ea176 ]
sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some
places it is called with the drv->lock mutex already held.
So it must always be called with the mutex locked. This commit adds missing
locking in the sst_set_be_modules() code-path.
Fixes:
24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200402185359.3424-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Santosh Sivaraj [Tue, 14 Jan 2020 05:40:51 +0000 (11:10 +0530)]
tools/test/nvdimm: Fix out of tree build
[ Upstream commit
1f776799628139d0da47e710ad86eb58d987ff66 ]
Out of tree build using
make M=tools/test/nvdimm O=/tmp/build -C /tmp/build
fails with the following error
make: Entering directory '/tmp/build'
CC [M] tools/testing/nvdimm/test/nfit.o
linux/tools/testing/nvdimm/test/nfit.c:19:10: fatal error: nd-core.h: No such file or directory
19 | #include <nd-core.h>
| ^~~~~~~~~~~
compilation terminated.
That is because the kbuild file uses $(src) which points to
tools/testing/nvdimm, $(srctree) correctly points to root of the linux
source tree.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Link: https://lore.kernel.org/r/20200114054051.4115790-1-santosh@fossix.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wu Bo [Tue, 24 Mar 2020 07:58:50 +0000 (15:58 +0800)]
scsi: iscsi: Report unbind session event when the target has been removed
[ Upstream commit
13e60d3ba287d96eeaf1deaadba51f71578119a3 ]
If the daemon is restarted or crashes while logging out of a session, the
unbind session event sent by the kernel is not processed and is lost. When
the daemon starts again, the session can't be unbound because the daemon is
waiting for the event message. However, the kernel has already logged out
and the event will not be resent.
When iscsid restart is complete, logout session reports error:
Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260]
iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260].
iscsiadm: initiator reported error (9 - internal error)
iscsiadm: Could not logout of all requested sessions
Make sure the unbind event is emitted.
[mkp: commit desc and applied by hand since patch was mangled]
Link: https://lore.kernel.org/r/4eab1771-2cb3-8e79-b31c-923652340e99@huawei.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sagi Grimberg [Mon, 23 Mar 2020 22:06:30 +0000 (15:06 -0700)]
nvme-tcp: fix possible crash in write_zeroes processing
[ Upstream commit
25e5cb780e62bde432b401f312bb847edc78b432 ]
We cannot look at blk_rq_payload_bytes without first checking
that the request has a mappable physical segments first (e.g.
blk_rq_nr_phys_segments(rq) != 0) and only then to take the
request payload bytes. This caused us to send a wrong sgl to
the target or even dereference a non-existing buffer in case
we actually got to the data send sequence (if it was in-capsule).
Reported-by: Tony Asleson <tasleson@redhat.com>
Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 16 Mar 2020 10:32:14 +0000 (11:32 +0100)]
pwm: rcar: Fix late Runtime PM enablement
[ Upstream commit
1451a3eed24b5fd6a604683f0b6995e0e7e16c79 ]
Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should be disabled after the removal of the PWM
chip.
Fixes:
ed6c1476bf7f16d5 ("pwm: Add support for R-Car PWM Timer")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yan, Zheng [Tue, 10 Mar 2020 11:34:20 +0000 (19:34 +0800)]
ceph: don't skip updating wanted caps when cap is stale
[ Upstream commit
0aa971b6fd3f92afef6afe24ef78d9bb14471519 ]
1. try_get_cap_refs() fails to get caps and finds that mds_wanted
does not include what it wants. It returns -ESTALE.
2. ceph_get_caps() calls ceph_renew_caps(). ceph_renew_caps() finds
that inode has cap, so it calls ceph_check_caps().
3. ceph_check_caps() finds that issued caps (without checking if it's
stale) already includes caps wanted by open file, so it skips
updating wanted caps.
Above events can cause an infinite loop inside ceph_get_caps().
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qiujun Huang [Fri, 6 Mar 2020 01:34:20 +0000 (09:34 +0800)]
ceph: return ceph_mdsc_do_request() errors from __get_parent()
[ Upstream commit
c6d50296032f0b97473eb2e274dc7cc5d0173847 ]
Return the error returned by ceph_mdsc_do_request(). Otherwise,
r_target_inode ends up being NULL this ends up returning ENOENT
regardless of the error.
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Javed Hasan [Fri, 27 Mar 2020 06:02:07 +0000 (23:02 -0700)]
scsi: libfc: If PRLI rejected, move rport to PLOGI state
[ Upstream commit
45e544bfdab2014d11c7595b8ccc3c4715a09015 ]
If PRLI reject code indicates "rejected status", move rport state machine
back to PLOGI state.
Link: https://lore.kernel.org/r/20200327060208.17104-2-skashyap@marvell.com
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Sun, 22 Mar 2020 18:12:59 +0000 (11:12 -0700)]
scsi: lpfc: Fix crash in target side cable pulls hitting WAIT_FOR_UNREG
[ Upstream commit
807e7353d8a7105ce884d22b0dbc034993c6679c ]
Kernel is crashing with the following stacktrace:
BUG: unable to handle kernel NULL pointer dereference at
00000000000005bc
IP: lpfc_nvme_register_port+0x1a8/0x3a0 [lpfc]
...
Call Trace:
lpfc_nlp_state_cleanup+0x2b2/0x500 [lpfc]
lpfc_nlp_set_state+0xd7/0x1a0 [lpfc]
lpfc_cmpl_prli_prli_issue+0x1f7/0x450 [lpfc]
lpfc_disc_state_machine+0x7a/0x1e0 [lpfc]
lpfc_cmpl_els_prli+0x16f/0x1e0 [lpfc]
lpfc_sli_sp_handle_rspiocb+0x5b2/0x690 [lpfc]
lpfc_sli_handle_slow_ring_event_s4+0x182/0x230 [lpfc]
lpfc_do_work+0x87f/0x1570 [lpfc]
kthread+0x10d/0x130
ret_from_fork+0x35/0x40
During target side fault injections, it is possible to hit the
NLP_WAIT_FOR_UNREG case in lpfc_nvme_remoteport_delete. A prior commit
fixed a rebind and delete race condition, but called lpfc_nlp_put
unconditionally. This triggered a deletion and the crash.
Fix by movng nlp_put to inside the NLP_WAIT_FOR_UNREG case, where the nlp
will be being unregistered/removed. Leave the reference if the flag isn't
set.
Link: https://lore.kernel.org/r/20200322181304.37655-8-jsmart2021@gmail.com
Fixes:
b15bd3e6212e ("scsi: lpfc: Fix nvme remoteport registration race conditions")
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Sun, 22 Mar 2020 18:12:57 +0000 (11:12 -0700)]
scsi: lpfc: Fix crash after handling a pci error
[ Upstream commit
4cd70891308dfb875ef31060c4a4aa8872630a2e ]
Injecting EEH on a 32GB card is causing kernel oops
The pci error handler is doing an IO flush and the offline code is also
doing an IO flush. When the 1st flush is complete the hdwq is destroyed
(freed), yet the second flush accesses the hdwq and crashes.
Added a check in lpfc_sli4_fush_io_rings to check both the HBA_IOQ_FLUSH
flag and the hdwq pointer to see if it is already set and not already
freed.
Link: https://lore.kernel.org/r/20200322181304.37655-6-jsmart2021@gmail.com
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Sun, 22 Mar 2020 18:12:53 +0000 (11:12 -0700)]
scsi: lpfc: Fix kasan slab-out-of-bounds error in lpfc_unreg_login
[ Upstream commit
38503943c89f0bafd9e3742f63f872301d44cbea ]
The following kasan bug was called out:
BUG: KASAN: slab-out-of-bounds in lpfc_unreg_login+0x7c/0xc0 [lpfc]
Read of size 2 at addr
ffff889fc7c50a22 by task lpfc_worker_3/6676
...
Call Trace:
dump_stack+0x96/0xe0
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
print_address_description.constprop.6+0x1b/0x220
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
__kasan_report.cold.9+0x37/0x7c
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
kasan_report+0xe/0x20
lpfc_unreg_login+0x7c/0xc0 [lpfc]
lpfc_sli_def_mbox_cmpl+0x334/0x430 [lpfc]
...
When processing the completion of a "Reg Rpi" login mailbox command in
lpfc_sli_def_mbox_cmpl, a call may be made to lpfc_unreg_login. The vpi is
extracted from the completing mailbox context and passed as an input for
the next. However, the vpi stored in the mailbox command context is an
absolute vpi, which for SLI4 represents both base + offset. When used with
a non-zero base component, (function id > 0) this results in an
out-of-range access beyond the allocated phba->vpi_ids array.
Fix by subtracting the function's base value to get an accurate vpi number.
Link: https://lore.kernel.org/r/20200322181304.37655-2-jsmart2021@gmail.com
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tero Kristo [Thu, 12 Mar 2020 09:58:06 +0000 (11:58 +0200)]
watchdog: reset last_hw_keepalive time at start
[ Upstream commit
982bb70517aef2225bad1d802887b733db492cc0 ]
Currently the watchdog core does not initialize the last_hw_keepalive
time during watchdog startup. This will cause the watchdog to be pinged
immediately if enough time has passed from the system boot-up time, and
some types of watchdogs like K3 RTI does not like this.
To avoid the issue, setup the last_hw_keepalive time during watchdog
startup.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Thu, 23 Jan 2020 15:47:20 +0000 (16:47 +0100)]
tools/testing/nvdimm: Fix compilation failure without CONFIG_DEV_DAX_PMEM_COMPAT
[ Upstream commit
c0e71d602053e4e7637e4bc7d0bc9603ea77a33f ]
When a kernel is configured without CONFIG_DEV_DAX_PMEM_COMPAT, the
compilation of tools/testing/nvdimm fails with:
Building modules, stage 2.
MODPOST 11 modules
ERROR: "dax_pmem_compat_test" [tools/testing/nvdimm/test/nfit_test.ko] undefined!
Fix the problem by calling dax_pmem_compat_test() only if the kernel has
the required functionality.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200123154720.12097-1-jack@suse.cz
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Catalin Marinas [Fri, 24 Apr 2020 16:38:05 +0000 (17:38 +0100)]
arm64: Silence clang warning on mismatched value/register sizes
[ Upstream commit:
27a22fbdeedd6c5c451cf5f830d51782bf50c3a2 ]
Clang reports a warning on the __tlbi(aside1is, 0) macro expansion since
the value size does not match the register size specified in the inline
asm. Construct the ASID value using the __TLBI_VADDR() macro.
Fixes:
222fc0c8503d ("arm64: compat: Workaround Neoverse-N1 #1542419 for compat user-space")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Morse [Fri, 24 Apr 2020 16:38:04 +0000 (17:38 +0100)]
arm64: compat: Workaround Neoverse-N1 #1542419 for compat user-space
[ Upstream commit
222fc0c8503d98cec3cb2bac2780cdd21a6e31c0 ]
Compat user-space is unable to perform ICIMVAU instructions from
user-space. Instead it uses a compat-syscall. Add the workaround for
Neoverse-N1 #1542419 to this code path.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Morse [Fri, 24 Apr 2020 16:38:03 +0000 (17:38 +0100)]
arm64: Fake the IminLine size on systems affected by Neoverse-N1 #1542419
[ Upstream commit
ee9d90be9ddace01b7fb126567e4b539fbe1f82f ]
Systems affected by Neoverse-N1 #1542419 support DIC so do not need to
perform icache maintenance once new instructions are cleaned to the PoU.
For the errata workaround, the kernel hides DIC from user-space, so that
the unnecessary cache maintenance can be trapped by firmware.
To reduce the number of traps, produce a fake IminLine value based on
PAGE_SIZE.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Morse [Fri, 24 Apr 2020 16:38:02 +0000 (17:38 +0100)]
arm64: errata: Hide CTR_EL0.DIC on systems affected by Neoverse-N1 #1542419
[ Upstream commit
05460849c3b51180d5ada3373d0449aea19075e4 ]
Cores affected by Neoverse-N1 #1542419 could execute a stale instruction
when a branch is updated to point to freshly generated instructions.
To workaround this issue we need user-space to issue unnecessary
icache maintenance that we can trap. Start by hiding CTR_EL0.DIC.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
William Dauchy [Fri, 27 Mar 2020 18:56:39 +0000 (19:56 +0100)]
net, ip_tunnel: fix interface lookup with no key
commit
25629fdaff2ff509dd0b3f5ff93d70a75e79e0a1 upstream.
when creating a new ipip interface with no local/remote configuration,
the lookup is done with TUNNEL_NO_KEY flag, making it impossible to
match the new interface (only possible match being fallback or metada
case interface); e.g: `ip link add tunl1 type ipip dev eth0`
To fix this case, adding a flag check before the key comparison so we
permit to match an interface with no local/remote config; it also avoids
breaking possible userland tools relying on TUNNEL_NO_KEY flag and
uninitialised key.
context being on my side, I'm creating an extra ipip interface attached
to the physical one, and moving it to a dedicated namespace.
Fixes:
c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randall Huang [Fri, 18 Oct 2019 06:56:22 +0000 (14:56 +0800)]
f2fs: fix to avoid memory leakage in f2fs_listxattr
commit
688078e7f36c293dae25b338ddc9e0a2790f6e06 upstream.
In f2fs_listxattr, there is no boundary check before
memcpy e_name to buffer.
If the e_name_len is corrupted,
unexpected memory contents may be returned to the buffer.
Signed-off-by: Randall Huang <huangrandall@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Monakhov [Wed, 6 Nov 2019 12:25:02 +0000 (12:25 +0000)]
ext4: fix extent_status fragmentation for plain files
[ Upstream commit
4068664e3cd2312610ceac05b74c4cf1853b8325 ]
Extents are cached in read_extent_tree_block(); as a result, extents
are not cached for inodes with depth == 0 when we try to find the
extent using ext4_find_extent(). The result of the lookup is cached
in ext4_map_blocks() but is only a subset of the extent on disk. As a
result, the contents of extents status cache can get very badly
fragmented for certain workloads, such as a random 4k read workload.
File size of /mnt/test is
33554432 (8192 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 8191: 40960.. 49151: 8192: last,eof
$ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test
$ perf script | grep ext4_es_insert_extent | head -n 10
fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W
fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W
fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W
fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W
fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W
fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W
fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W
fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W
fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W
Fix this by caching the extents for inodes with depth == 0 in
ext4_find_extent().
[ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this
newly added function is not in extents_cache.c, and to avoid
potential visual confusion with ext4_es_cache_extent(). -TYT ]
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Link: https://lore.kernel.org/r/20191106122502.19986-1-dmonakhov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Thu, 23 Apr 2020 08:36:46 +0000 (10:36 +0200)]
Linux 5.4.35
Daniel Borkmann [Tue, 21 Apr 2020 13:01:52 +0000 (15:01 +0200)]
bpf, test_verifier: switch bpf_get_stack's 0 s> r8 test
[ no upstream commit ]
Switch the comparison, so that is_branch_taken() will recognize that below
branch is never taken:
[...]
17: [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-
2147483648,smax_value=-1,umin_value=
18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
17: (67) r8 <<= 32
18: [...] R8_w=inv(id=0,smax_value=-
4294967296,umin_value=
9223372036854775808,umax_value=
18446744069414584320,var_off=(0x8000000000000000; 0x7fffffff00000000)) [...]
18: (c7) r8 s>>= 32
19: [...] R8_w=inv(id=0,smin_value=-
2147483648,smax_value=-1,umin_value=
18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
19: (6d) if r1 s> r8 goto pc+16
[...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-
2147483648,smax_value=-1,umin_value=
18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
[...]
Currently we check for is_branch_taken() only if either K is source, or source
is a scalar value that is const. For upstream it would be good to extend this
properly to check whether dst is const and src not.
For the sake of the test_verifier, it is probably not needed here:
# ./test_verifier 101
#101/p bpf_get_stack return R0 within range OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
I haven't seen this issue in test_progs* though, they are passing fine:
# ./test_progs-no_alu32 -t get_stack
Switching to flavor 'no_alu32' subdirectory...
#20 get_stack_raw_tp:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
# ./test_progs -t get_stack
#20 get_stack_raw_tp:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Fastabend [Mon, 30 Mar 2020 21:37:19 +0000 (14:37 -0700)]
bpf: Test_progs, add test to catch retval refine error handling
commit
d2db08c7a14e0b5eed6132baf258b80622e041a9 upstream.
Before this series the verifier would clamp return bounds of
bpf_get_stack() to [0, X] and this led the verifier to believe
that a JMP_JSLT 0 would be false and so would prune that path.
The result is anything hidden behind that JSLT would be unverified.
Add a test to catch this case by hiding an goto pc-1 behind the
check which will cause an infinite loop if not rejected.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560423908.10843.11783152347709008373.stgit@john-Precision-5820-Tower
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Fastabend [Mon, 30 Mar 2020 21:37:40 +0000 (14:37 -0700)]
bpf: Test_verifier, bpf_get_stack return value add <0
commit
9ac26e9973bac5716a2a542e32f380c84db2b88c upstream.
With current ALU32 subreg handling and retval refine fix from last
patches we see an expected failure in test_verifier. With verbose
verifier state being printed at each step for clarity we have the
following relavent lines [I omit register states that are not
necessarily useful to see failure cause],
#101/p bpf_get_stack return R0 within range FAIL
Failed to load prog 'Success'!
[..]
14: (85) call bpf_get_stack#67
R0_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
R3_w=inv48
15:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
15: (b7) r1 = 0
16:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
16: (bf) r8 = r0
17:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
17: (67) r8 <<= 32
18:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smax_value=
9223372032559808512,
umax_value=
18446744069414584320,
var_off=(0x0; 0xffffffff00000000),
s32_min_value=0,
s32_max_value=0,
u32_max_value=0,
var32_off=(0x0; 0x0))
18: (c7) r8 s>>= 32
19
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-
2147483648,
smax_value=
2147483647,
var32_off=(0x0; 0xffffffff))
19: (cd) if r1 s< r8 goto pc+16
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-
2147483648,
smax_value=0,
var32_off=(0x0; 0xffffffff))
20:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-
2147483648,
smax_value=0,
R9=inv48
20: (1f) r9 -= r8
21: (bf) r2 = r7
22:
R2_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
22: (0f) r2 += r8
value -
2147483648 makes map_value pointer be out of bounds
After call bpf_get_stack() on line 14 and some moves we have at line 16
an r8 bound with max_value 48 but an unknown min value. This is to be
expected bpf_get_stack call can only return a max of the input size but
is free to return any negative error in the 32-bit register space. The
C helper is returning an int so will use lower 32-bits.
Lines 17 and 18 clear the top 32 bits with a left/right shift but use
ARSH so we still have worst case min bound before line 19 of -
2147483648.
At this point the signed check 'r1 s< r8' meant to protect the addition
on line 22 where dst reg is a map_value pointer may very well return
true with a large negative number. Then the final line 22 will detect
this as an invalid operation and fail the program. What we want to do
is proceed only if r8 is positive non-error. So change 'r1 s< r8' to
'r1 s> r8' so that we jump if r8 is negative.
Next we will throw an error because we access past the end of the map
value. The map value size is 48 and sizeof(struct test_val) is 48 so
we walk off the end of the map value on the second call to
get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to
24 by using 'sizeof(struct test_val) / 2'. After this everything passes
as expected.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/158560426019.10843.3285429543232025187.stgit@john-Precision-5820-Tower
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Tue, 21 Apr 2020 13:01:49 +0000 (15:01 +0200)]
bpf: fix buggy r0 retval refinement for tracing helpers
[ no upstream commit ]
See the glory details in
100605035e15 ("bpf: Verifier, do_refine_retval_range
may clamp umin to 0 incorrectly") for why
849fa50662fb ("bpf/verifier: refine
retval R0 state for bpf_get_stack helper") is buggy. The whole series however
is not suitable for stable since it adds significant amount [0] of verifier
complexity in order to add 32bit subreg tracking. Something simpler is needed.
Unfortunately, reverting
849fa50662fb ("bpf/verifier: refine retval R0 state
for bpf_get_stack helper") or just cherry-picking
100605035e15 ("bpf: Verifier,
do_refine_retval_range may clamp umin to 0 incorrectly") is not an option since
it will break existing tracing programs badly (at least those that are using
bpf_get_stack() and bpf_probe_read_str() helpers). Not fixing it in stable is
also not an option since on 4.19 kernels an error will cause a soft-lockup due
to hitting dead-code sanitized branch since we don't hard-wire such branches
in old kernels yet. But even then for 5.x
849fa50662fb ("bpf/verifier: refine
retval R0 state for bpf_get_stack helper") would cause wrong bounds on the
verifier simluation when an error is hit.
In one of the earlier iterations of mentioned patch series for upstream there
was the concern that just using smax_value in do_refine_retval_range() would
nuke bounds by subsequent <<32 >>32 shifts before the comparison against 0 [1]
which eventually led to the 32bit subreg tracking in the first place. While I
initially went for implementing the idea [1] to pattern match the two shift
operations, it turned out to be more complex than actually needed, meaning, we
could simply treat do_refine_retval_range() similarly to how we branch off
verification for conditionals or under speculation, that is, pushing a new
reg state to the stack for later verification. This means, instead of verifying
the current path with the ret_reg in [S32MIN, msize_max_value] interval where
later bounds would get nuked, we split this into two: i) for the success case
where ret_reg can be in [0, msize_max_value], and ii) for the error case with
ret_reg known to be in interval [S32MIN, -1]. Latter will preserve the bounds
during these shift patterns and can match reg < 0 test. test_progs also succeed
with this approach.
[0] https://lore.kernel.org/bpf/
158507130343.15666.
8018068546764556975.stgit@john-Precision-5820-Tower/
[1] https://lore.kernel.org/bpf/
158015334199.28573.
4940395881683556537.stgit@john-XPS-13-9370/T/#m2e0ad1d5949131014748b6daa48a3495e7f0456d
Fixes:
849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper")
Reported-by: Lorenzo Fontana <fontanalorenz@gmail.com>
Reported-by: Leonardo Di Donato <leodidonato@gmail.com>
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waiman Long [Sun, 22 Mar 2020 01:11:24 +0000 (21:11 -0400)]
KEYS: Don't write out to userspace while holding key semaphore
commit
d3ec10aa95819bff18a0d936b18884c7816d0914 upstream.
A lockdep circular locking dependency report was seen when running a
keyutils test:
[12537.027242] ======================================================
[12537.059309] WARNING: possible circular locking dependency detected
[12537.088148] 4.18.0-147.7.1.el8_1.x86_64+debug #1 Tainted: G OE --------- - -
[12537.125253] ------------------------------------------------------
[12537.153189] keyctl/25598 is trying to acquire lock:
[12537.175087]
000000007c39f96c (&mm->mmap_sem){++++}, at: __might_fault+0xc4/0x1b0
[12537.208365]
[12537.208365] but task is already holding lock:
[12537.234507]
000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220
[12537.270476]
[12537.270476] which lock already depends on the new lock.
[12537.270476]
[12537.307209]
[12537.307209] the existing dependency chain (in reverse order) is:
[12537.340754]
[12537.340754] -> #3 (&type->lock_class){++++}:
[12537.367434] down_write+0x4d/0x110
[12537.385202] __key_link_begin+0x87/0x280
[12537.405232] request_key_and_link+0x483/0xf70
[12537.427221] request_key+0x3c/0x80
[12537.444839] dns_query+0x1db/0x5a5 [dns_resolver]
[12537.468445] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs]
[12537.496731] cifs_reconnect+0xe04/0x2500 [cifs]
[12537.519418] cifs_readv_from_socket+0x461/0x690 [cifs]
[12537.546263] cifs_read_from_socket+0xa0/0xe0 [cifs]
[12537.573551] cifs_demultiplex_thread+0x311/0x2db0 [cifs]
[12537.601045] kthread+0x30c/0x3d0
[12537.617906] ret_from_fork+0x3a/0x50
[12537.636225]
[12537.636225] -> #2 (root_key_user.cons_lock){+.+.}:
[12537.664525] __mutex_lock+0x105/0x11f0
[12537.683734] request_key_and_link+0x35a/0xf70
[12537.705640] request_key+0x3c/0x80
[12537.723304] dns_query+0x1db/0x5a5 [dns_resolver]
[12537.746773] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs]
[12537.775607] cifs_reconnect+0xe04/0x2500 [cifs]
[12537.798322] cifs_readv_from_socket+0x461/0x690 [cifs]
[12537.823369] cifs_read_from_socket+0xa0/0xe0 [cifs]
[12537.847262] cifs_demultiplex_thread+0x311/0x2db0 [cifs]
[12537.873477] kthread+0x30c/0x3d0
[12537.890281] ret_from_fork+0x3a/0x50
[12537.908649]
[12537.908649] -> #1 (&tcp_ses->srv_mutex){+.+.}:
[12537.935225] __mutex_lock+0x105/0x11f0
[12537.954450] cifs_call_async+0x102/0x7f0 [cifs]
[12537.977250] smb2_async_readv+0x6c3/0xc90 [cifs]
[12538.000659] cifs_readpages+0x120a/0x1e50 [cifs]
[12538.023920] read_pages+0xf5/0x560
[12538.041583] __do_page_cache_readahead+0x41d/0x4b0
[12538.067047] ondemand_readahead+0x44c/0xc10
[12538.092069] filemap_fault+0xec1/0x1830
[12538.111637] __do_fault+0x82/0x260
[12538.129216] do_fault+0x419/0xfb0
[12538.146390] __handle_mm_fault+0x862/0xdf0
[12538.167408] handle_mm_fault+0x154/0x550
[12538.187401] __do_page_fault+0x42f/0xa60
[12538.207395] do_page_fault+0x38/0x5e0
[12538.225777] page_fault+0x1e/0x30
[12538.243010]
[12538.243010] -> #0 (&mm->mmap_sem){++++}:
[12538.267875] lock_acquire+0x14c/0x420
[12538.286848] __might_fault+0x119/0x1b0
[12538.306006] keyring_read_iterator+0x7e/0x170
[12538.327936] assoc_array_subtree_iterate+0x97/0x280
[12538.352154] keyring_read+0xe9/0x110
[12538.370558] keyctl_read_key+0x1b9/0x220
[12538.391470] do_syscall_64+0xa5/0x4b0
[12538.410511] entry_SYSCALL_64_after_hwframe+0x6a/0xdf
[12538.435535]
[12538.435535] other info that might help us debug this:
[12538.435535]
[12538.472829] Chain exists of:
[12538.472829] &mm->mmap_sem --> root_key_user.cons_lock --> &type->lock_class
[12538.472829]
[12538.524820] Possible unsafe locking scenario:
[12538.524820]
[12538.551431] CPU0 CPU1
[12538.572654] ---- ----
[12538.595865] lock(&type->lock_class);
[12538.613737] lock(root_key_user.cons_lock);
[12538.644234] lock(&type->lock_class);
[12538.672410] lock(&mm->mmap_sem);
[12538.687758]
[12538.687758] *** DEADLOCK ***
[12538.687758]
[12538.714455] 1 lock held by keyctl/25598:
[12538.732097] #0:
000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220
[12538.770573]
[12538.770573] stack backtrace:
[12538.790136] CPU: 2 PID: 25598 Comm: keyctl Kdump: loaded Tainted: G
[12538.844855] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015
[12538.881963] Call Trace:
[12538.892897] dump_stack+0x9a/0xf0
[12538.907908] print_circular_bug.isra.25.cold.50+0x1bc/0x279
[12538.932891] ? save_trace+0xd6/0x250
[12538.948979] check_prev_add.constprop.32+0xc36/0x14f0
[12538.971643] ? keyring_compare_object+0x104/0x190
[12538.992738] ? check_usage+0x550/0x550
[12539.009845] ? sched_clock+0x5/0x10
[12539.025484] ? sched_clock_cpu+0x18/0x1e0
[12539.043555] __lock_acquire+0x1f12/0x38d0
[12539.061551] ? trace_hardirqs_on+0x10/0x10
[12539.080554] lock_acquire+0x14c/0x420
[12539.100330] ? __might_fault+0xc4/0x1b0
[12539.119079] __might_fault+0x119/0x1b0
[12539.135869] ? __might_fault+0xc4/0x1b0
[12539.153234] keyring_read_iterator+0x7e/0x170
[12539.172787] ? keyring_read+0x110/0x110
[12539.190059] assoc_array_subtree_iterate+0x97/0x280
[12539.211526] keyring_read+0xe9/0x110
[12539.227561] ? keyring_gc_check_iterator+0xc0/0xc0
[12539.249076] keyctl_read_key+0x1b9/0x220
[12539.266660] do_syscall_64+0xa5/0x4b0
[12539.283091] entry_SYSCALL_64_after_hwframe+0x6a/0xdf
One way to prevent this deadlock scenario from happening is to not
allow writing to userspace while holding the key semaphore. Instead,
an internal buffer is allocated for getting the keys out from the
read method first before copying them out to userspace without holding
the lock.
That requires taking out the __user modifier from all the relevant
read methods as well as additional changes to not use any userspace
write helpers. That is,
1) The put_user() call is replaced by a direct copy.
2) The copy_to_user() call is replaced by memcpy().
3) All the fault handling code is removed.
Compiling on a x86-64 system, the size of the rxrpc_read() function is
reduced from 3795 bytes to 2384 bytes with this patch.
Fixes: ^
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wen Yang [Wed, 18 Mar 2020 15:31:56 +0000 (23:31 +0800)]
mtd: phram: fix a double free issue in error path
commit
49c64df880570034308e4a9a49c4bc95cf8cdb33 upstream.
The variable 'name' is released multiple times in the error path,
which may cause double free issues.
This problem is avoided by adding a goto label to release the memory
uniformly. And this change also makes the code a bit more cleaner.
Fixes:
4f678a58d335 ("mtd: fix memory leaks in phram_setup")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 28 Feb 2020 09:25:54 +0000 (12:25 +0300)]
mtd: lpddr: Fix a double free in probe()
commit
4da0ea71ea934af18db4c63396ba2af1a679ef02 upstream.
This function is only called from lpddr_probe(). We free "lpddr" both
here and in the caller, so it's a double free. The best place to free
"lpddr" is in lpddr_probe() so let's delete this one.
Fixes:
8dc004395d5e ("[MTD] LPDDR qinfo probing.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200228092554.o57igp3nqhyvf66t@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Neuschäfer [Tue, 18 Feb 2020 15:02:19 +0000 (16:02 +0100)]
docs: Fix path to MTD command line partition parser
commit
fb2511247dc4061fd122d0195838278a4a0b7b59 upstream.
cmdlinepart.c has been moved to drivers/mtd/parsers/.
Fixes:
a3f12a35c91d ("mtd: parsers: Move CMDLINE parser")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frieder Schrempf [Tue, 18 Feb 2020 10:05:25 +0000 (10:05 +0000)]
mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB
commit
621a7b780bd8b7054647d53d5071961f2c9e0873 upstream.
When writing the bad block marker to the OOB area the access mode
should be set to MTD_OPS_RAW as it is done for reading the marker.
Currently this only works because req.mode is initialized to
MTD_OPS_PLACE_OOB (0) and spinand_write_to_cache_op() checks for
req.mode != MTD_OPS_AUTO_OOB.
Fix this by explicitly setting req.mode to MTD_OPS_RAW.
Fixes:
7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-3-frieder.schrempf@kontron.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Kerello [Thu, 23 Jan 2020 08:22:48 +0000 (09:22 +0100)]
mtd: rawnand: free the nand_device object
commit
009264605cdf1b12962c3a46f75818d05452e890 upstream.
This patch releases the resources allocated in nanddev_init function.
Fixes:
a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object")
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1579767768-32295-1-git-send-email-christophe.kerello@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul E. McKenney [Thu, 23 Jan 2020 17:19:01 +0000 (09:19 -0800)]
locktorture: Print ratio of acquisitions, not failures
commit
80c503e0e68fbe271680ab48f0fe29bc034b01b7 upstream.
The __torture_print_stats() function in locktorture.c carefully
initializes local variable "min" to statp[0].n_lock_acquired, but
then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail
field should normally be zero, and given the initialization, it seems
reasonable to display the maximum and minimum number acquisitions
instead of miscomputing the maximum and minimum number of failures.
This commit therefore switches from failures to acquisitions.
And this turns out to be not only a day-zero bug, but entirely my
own fault. I hate it when that happens!
Fixes:
0af3fe1efa53 ("locktorture: Add a lock-torture kernel module")
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Rothwell [Thu, 9 Jan 2020 07:39:12 +0000 (18:39 +1100)]
tty: evh_bytechan: Fix out of bounds accesses
commit
3670664b5da555a2a481449b3baafff113b0ac35 upstream.
ev_byte_channel_send() assumes that its third argument is a 16 byte
array. Some places where it is called it may not be (or we can't
easily tell if it is). Newer compilers have started producing warnings
about this, so make sure we actually pass a 16 byte array.
There may be more elegant solutions to this, but the driver is quite
old and hasn't been updated in many years.
The warnings (from a powerpc allyesconfig build) are:
In file included from include/linux/byteorder/big_endian.h:5,
from arch/powerpc/include/uapi/asm/byteorder.h:14,
from include/asm-generic/bitops/le.h:6,
from arch/powerpc/include/asm/bitops.h:250,
from include/linux/bitops.h:29,
from include/linux/kernel.h:12,
from include/asm-generic/bug.h:19,
from arch/powerpc/include/asm/bug.h:109,
from include/linux/bug.h:5,
from include/linux/mmdebug.h:5,
from include/linux/gfp.h:5,
from include/linux/slab.h:15,
from drivers/tty/ehv_bytechan.c:24:
drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’:
arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds]
298 | r6 = be32_to_cpu(p[1]);
include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’
40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
| ^
arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’
298 | r6 = be32_to_cpu(p[1]);
| ^~~~~~~~~~~
drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’
166 | static void ehv_bc_udbg_putc(char c)
| ^~~~~~~~~~~~~~~~
Fixes:
dcd83aaff1c8 ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
[mpe: Trim warnings from change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200109183912.5fcb52aa@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Wed, 18 Dec 2019 03:00:25 +0000 (20:00 -0700)]
fbmem: Adjust indentation in fb_prepare_logo and fb_blank
commit
93166f5f2e4dc593cff8ca77ef828ac6f148b0f3 upstream.
Clang warns:
../drivers/video/fbdev/core/fbmem.c:665:3: warning: misleading
indentation; statement is not part of the previous 'else'
[-Wmisleading-indentation]
if (fb_logo.depth > 4 && depth > 4) {
^
../drivers/video/fbdev/core/fbmem.c:661:2: note: previous statement is
here
else
^
../drivers/video/fbdev/core/fbmem.c:1075:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
return ret;
^
../drivers/video/fbdev/core/fbmem.c:1072:2: note: previous statement is
here
if (!ret)
^
2 warnings generated.
This warning occurs because there are spaces before the tabs on these
lines. Normalize the indentation in these functions so that it is
consistent with the Linux kernel coding style and clang no longer warns.
Fixes:
1692b37c99d5 ("fbdev: Fix logo if logo depth is less than framebuffer depth")
Link: https://github.com/ClangBuiltLinux/linux/issues/825
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218030025.10064-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Roussin-Bélanger [Wed, 19 Feb 2020 17:40:08 +0000 (12:40 -0500)]
iio: si1133: read 24-bit signed integer for measurement
commit
328b50e9a0ad1fe8accdf8c19923deebab5e0c01 upstream.
The chip is configured in 24 bit mode. The values read from
it must always be treated as is. This fixes the issue by
replacing the previous 16 bits value by a 24 bits buffer.
This changes affects the value output by previous version of
the driver, since the least significant byte was missing.
The upper half of 16 bit values previously output are now
the upper half of a 24 bit value.
Fixes:
e01e7eaf37d8 ("iio: light: introduce si1133")
Reported-by: Simon Goyette <simon.goyette@gmail.com>
Co-authored-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jernej Skrabec [Fri, 24 Jan 2020 23:20:09 +0000 (00:20 +0100)]
ARM: dts: sunxi: Fix DE2 clocks register range
commit
da180322582bd9db07f29e6d4a2d170afde0703f upstream.
As it can be seen from DE2 manual, clock range is 0x10000.
Fix it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Fixes:
73f122c82775 ("ARM: dts: sun8i: a83t: Add display pipeline")
Fixes:
05a43a262d03 ("ARM: dts: sun8i: r40: Add HDMI pipeline")
Fixes:
21b299209330 ("ARM: sun8i: v3s: add device nodes for DE2 display pipeline")
Fixes:
d8c6f1f0295c ("ARM: sun8i: h3/h5: add DE2 CCU device node for H3")
[wens@csie.org: added fixes tags]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 13 Jan 2020 11:08:14 +0000 (14:08 +0300)]
fbdev: potential information leak in do_fb_ioctl()
commit
d3d19d6fc5736a798b118971935ce274f7deaa82 upstream.
The "fix" struct has a 2 byte hole after ->ywrapstep and the
"fix = info->fix;" assignment doesn't necessarily clear it. It depends
on the compiler. The solution is just to replace the assignment with an
memcpy().
Fixes:
1f5e31d7e55a ("fbmem: don't call copy_from/to_user() with mutex held")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Grygorii Strashko [Wed, 8 Apr 2020 19:43:00 +0000 (22:43 +0300)]
dma-debug: fix displaying of dma allocation type
commit
9bb50ed7470944238ec8e30a94ef096caf9056ee upstream.
The commit
2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using
dma_map_page_attrs") removed "dma_debug_page" enum, but missed to update
type2name string table. This causes incorrect displaying of dma allocation
type.
Fix it by removing "page" string from type2name string table and switch to
use named initializers.
Before (dma_alloc_coherent()):
k3-ringacc
4b800000.ringacc: scather-gather idx 2208 P=
d1140000 N=d114 D=
d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
k3-ringacc
4b800000.ringacc: scather-gather idx 2216 P=
d1150000 N=d115 D=
d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
After:
k3-ringacc
4b800000.ringacc: coherent idx 2208 P=
d1140000 N=d114 D=
d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
k3-ringacc
4b800000.ringacc: coherent idx 2216 P=
d1150000 N=d115 D=
d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
Fixes:
2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Mon, 30 Mar 2020 21:38:46 +0000 (14:38 -0700)]
net: dsa: bcm_sf2: Fix overflow checks
commit
d0802dc411f469569a537283b6f3833af47aece9 upstream.
Commit
f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing
set_rxnfc") tried to fix the some user controlled buffer overflows in
bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using
CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is
not representative of what the device actually supports. Correct that by
using bcm_sf2_cfp_rule_size() instead.
The latter subtracts the number of rules by 1, so change the checks from
greater than or equal to greater than accordingly.
Fixes:
f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Skeggs [Tue, 31 Mar 2020 06:08:44 +0000 (16:08 +1000)]
drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init
[ Upstream commit
028a12f5aa829b4ba6ac011530b815eda4960e89 ]
Certain boards with GP107/GP108 chipsets hang (often, but randomly) for
unknown reasons during GR initialisation.
The first tell-tale symptom of this issue is:
nouveau 0000:01:00.0: bus: MMIO read of
00000000 FAULT at 409800 [ TIMEOUT ]
appearing in dmesg, likely followed by many other failures being logged.
Karol found this WAR for the issue a while back, but efforts to isolate
the root cause and proper fix have not yielded success so far. I've
modified the original patch to include a few more details, limit it to
GP107/GP108 by default, and added a config option to override this choice.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Fri, 14 Feb 2020 09:45:12 +0000 (17:45 +0800)]
f2fs: fix to wait all node page writeback
[ Upstream commit
dc5a941223edd803f476a153abd950cc3a83c3e1 ]
There is a race condition that we may miss to wait for all node pages
writeback, fix it.
- fsync() - shrink
- f2fs_do_sync_file
- __write_node_page
- set_page_writeback(page#0)
: remove DIRTY/TOWRITE flag
- f2fs_fsync_node_pages
: won't find page #0 as TOWRITE flag was removeD
- f2fs_wait_on_node_pages_writeback
: wont' wait page #0 writeback as it was not in fsync_node_list list.
- f2fs_add_fsync_node_entry
Fixes:
50fa53eccf9f ("f2fs: fix to avoid broken of dnode block list")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adrian Huang [Fri, 14 Feb 2020 10:44:51 +0000 (18:44 +0800)]
iommu/amd: Fix the configuration of GCR3 table root pointer
[ Upstream commit
c20f36534666e37858a14e591114d93cc1be0d34 ]
The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However,
this requires 21 bits (Please see the AMD IOMMU specification).
This leads to the potential failure when the bit 51 of SPA of
the GCR3 table root pointer is 1'.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Fixes:
52815b75682e2 ("iommu/amd: Add support for IOMMUv2 domain mode")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 25 Feb 2020 16:20:56 +0000 (19:20 +0300)]
libnvdimm: Out of bounds read in __nd_ioctl()
[ Upstream commit
f84afbdd3a9e5e10633695677b95422572f920dc ]
The "cmd" comes from the user and it can be up to 255. It it's more
than the number of bits in long, it results out of bounds read when we
check test_bit(cmd, &cmd_mask). The highest valid value for "cmd" is
ND_CMD_CALL (10) so I added a compare against that.
Fixes:
62232e45f4a2 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200225162055.amtosfy7m35aivxg@kili.mountain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeffery Miller [Tue, 25 Feb 2020 22:59:41 +0000 (16:59 -0600)]
power: supply: axp288_fuel_gauge: Broaden vendor check for Intel Compute Sticks.
[ Upstream commit
e42fe5b29ac07210297e75f36deefe54edbdbf80 ]
The Intel Compute Stick `STK1A32SC` can have a system vendor of
"Intel(R) Client Systems".
Broaden the Intel Compute Stick DMI checks so that they match "Intel
Corporation" as well as "Intel(R) Client Systems".
This fixes an issue where the STK1A32SC compute sticks were still
exposing a battery with the existing blacklist entry.
Signed-off-by: Jeffery Miller <jmiller@neverware.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guo Ren [Wed, 26 Feb 2020 02:23:26 +0000 (10:23 +0800)]
csky: Fixup init_fpu compile warning with __init
[ Upstream commit
12879bda3c2a974b7e4fe199a9c21f0c5f6bca04 ]
WARNING: vmlinux.o(.text+0x2366): Section mismatch in reference from the
function csky_start_secondary() to the function .init.text:init_fpu()
The function csky_start_secondary() references
the function __init init_fpu().
This is often because csky_start_secondary lacks a __init
annotation or the annotation of init_fpu is wrong.
Reported-by: Lu Chongzhi <chongzhi.lcz@alibaba-inc.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuck Lever [Wed, 11 Mar 2020 15:21:07 +0000 (11:21 -0400)]
sunrpc: Fix gss_unwrap_resp_integ() again
[ Upstream commit
4047aa909c4a40fceebc36fff708d465a4d3c6e2 ]
xdr_buf_read_mic() tries to find unused contiguous space in a
received xdr_buf in order to linearize the checksum for the call
to gss_verify_mic. However, the corner cases in this code are
numerous and we seem to keep missing them. I've just hit yet
another buffer overrun related to it.
This overrun is at the end of xdr_buf_read_mic():
1284 if (buf->tail[0].iov_len != 0)
1285 mic->data = buf->tail[0].iov_base + buf->tail[0].iov_len;
1286 else
1287 mic->data = buf->head[0].iov_base + buf->head[0].iov_len;
1288 __read_bytes_from_xdr_buf(&subbuf, mic->data, mic->len);
1289 return 0;
This logic assumes the transport has set the length of the tail
based on the size of the received message. base + len is then
supposed to be off the end of the message but still within the
actual buffer.
In fact, the length of the tail is set by the upper layer when the
Call is encoded so that the end of the tail is actually the end of
the allocated buffer itself. This causes the logic above to set
mic->data to point past the end of the receive buffer.
The "mic->data = head" arm of this if statement is no less fragile.
As near as I can tell, this has been a problem forever. I'm not sure
that minimizing au_rslack recently changed this pathology much.
So instead, let's use a more straightforward approach: kmalloc a
separate buffer to linearize the checksum. This is similar to
how gss_validate() currently works.
Coming back to this code, I had some trouble understanding what
was going on. So I've cleaned up the variable naming and added
a few comments that point back to the XDR definition in RFC 2203
to help guide future spelunkers, including myself.
As an added clean up, the functionality that was in
xdr_buf_read_mic() is folded directly into gss_unwrap_resp_integ(),
as that is its only caller.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Tue, 17 Mar 2020 11:40:02 +0000 (12:40 +0100)]
ext2: fix debug reference to ext2_xattr_cache
[ Upstream commit
32302085a8d90859c40cf1a5e8313f575d06ec75 ]
Fix a debug-only build error in ext2/xattr.c:
When building without extra debugging, (and with another patch that uses
no_printk() instead of <empty> for the ext2-xattr debug-print macros,
this build error happens:
../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’:
../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in
this function); did you mean ‘ext2_xattr_list’?
atomic_read(&ext2_xattr_cache->c_entry_count));
Fix the problem by removing cached entry count from the debug message
since otherwise we'd have to export the mbcache structure just for that.
Fixes:
be0726d33cb8 ("ext2: convert to mbcache2")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacob Pan [Tue, 17 Mar 2020 01:10:18 +0000 (09:10 +0800)]
iommu/vt-d: Fix page request descriptor size
[ Upstream commit
52355fb1919ef7ed9a38e0f3de6e928de1f57217 ]
Intel VT-d might support PRS (Page Reqest Support) when it's
running in the scalable mode. Each page request descriptor
occupies 32 bytes and is 32-bytes aligned. The page request
descriptor offset mask should be 32-bytes aligned.
Fixes:
5b438f4ba315d ("iommu/vt-d: Support page request in scalable mode")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Tue, 17 Mar 2020 15:03:26 +0000 (11:03 -0400)]
iommu/vt-d: Silence RCU-list debugging warning in dmar_find_atsr()
[ Upstream commit
c6f4ebdeba4cff590594df931ff1ee610c426431 ]
dmar_find_atsr() calls list_for_each_entry_rcu() outside of an RCU read
side critical section but with dmar_global_lock held. Silence this
false positive.
drivers/iommu/intel-iommu.c:4504 RCU-list traversed in non-reader section!!
1 lock held by swapper/0/1:
#0:
ffffffff9755bee8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1a6/0xe19
Call Trace:
dump_stack+0xa4/0xfe
lockdep_rcu_suspicious+0xeb/0xf5
dmar_find_atsr+0x1ab/0x1c0
dmar_parse_one_atsr+0x64/0x220
dmar_walk_remapping_entries+0x130/0x380
dmar_table_init+0x166/0x243
intel_iommu_init+0x1ab/0xe19
pci_iommu_init+0x1a/0x44
do_one_initcall+0xae/0x4d0
kernel_init_freeable+0x412/0x4c5
kernel_init+0x19/0x193
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Mon, 23 Mar 2020 02:45:41 +0000 (19:45 -0700)]
ext2: fix empty body warnings when -Wextra is used
[ Upstream commit
44a52022e7f15cbaab957df1c14f7a4f527ef7cf ]
When EXT2_ATTR_DEBUG is not defined, modify the 2 debug macros
to use the no_printk() macro instead of <nothing>.
This fixes gcc warnings when -Wextra is used:
../fs/ext2/xattr.c:252:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:258:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:330:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:872:45: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
I have verified that the only object code change (with gcc 7.5.0) is
the reversal of some instructions from 'cmp a,b' to 'cmp b,a'.
Link: https://lore.kernel.org/r/e18a7395-61fb-2093-18e8-ed4f8cf56248@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jan Kara <jack@suse.com>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olga Kornievskaia [Thu, 26 Mar 2020 14:24:51 +0000 (10:24 -0400)]
SUNRPC: fix krb5p mount to provide large enough buffer in rq_rcvsize
[ Upstream commit
df513a7711712758b9cb1a48d86712e7e1ee03f4 ]
Ever since commit
2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing
reply buffer size"). It changed how "req->rq_rcvsize" is calculated. It
used to use au_cslack value which was nice and large and changed it to
au_rslack value which turns out to be too small.
Since 5.1, v3 mount with sec=krb5p fails against an Ontap server
because client's receive buffer it too small.
For gss krb5p, we need to account for the mic token in the verifier,
and the wrap token in the wrap token.
RFC 4121 defines:
mic token
Octet no Name Description
--------------------------------------------------------------
0..1 TOK_ID Identification field. Tokens emitted by
GSS_GetMIC() contain the hex value 04 04
expressed in big-endian order in this
field.
2 Flags Attributes field, as described in section
4.2.2.
3..7 Filler Contains five octets of hex value FF.
8..15 SND_SEQ Sequence number field in clear text,
expressed in big-endian order.
16..last SGN_CKSUM Checksum of the "to-be-signed" data and
octet 0..15, as described in section 4.2.4.
that's 16bytes (GSS_KRB5_TOK_HDR_LEN) + chksum
wrap token
Octet no Name Description
--------------------------------------------------------------
0..1 TOK_ID Identification field. Tokens emitted by
GSS_Wrap() contain the hex value 05 04
expressed in big-endian order in this
field.
2 Flags Attributes field, as described in section
4.2.2.
3 Filler Contains the hex value FF.
4..5 EC Contains the "extra count" field, in big-
endian order as described in section 4.2.3.
6..7 RRC Contains the "right rotation count" in big-
endian order, as described in section
4.2.5.
8..15 SND_SEQ Sequence number field in clear text,
expressed in big-endian order.
16..last Data Encrypted data for Wrap tokens with
confidentiality, or plaintext data followed
by the checksum for Wrap tokens without
confidentiality, as described in section
4.2.4.
Also 16bytes of header (GSS_KRB5_TOK_HDR_LEN), encrypted data, and cksum
(other things like padding)
RFC 3961 defines known cksum sizes:
Checksum type sumtype checksum section or
value size reference
---------------------------------------------------------------------
CRC32 1 4 6.1.3
rsa-md4 2 16 6.1.2
rsa-md4-des 3 24 6.2.5
des-mac 4 16 6.2.7
des-mac-k 5 8 6.2.8
rsa-md4-des-k 6 16 6.2.6
rsa-md5 7 16 6.1.1
rsa-md5-des 8 24 6.2.4
rsa-md5-des3 9 24 ??
sha1 (unkeyed) 10 20 ??
hmac-sha1-des3-kd 12 20 6.3
hmac-sha1-des3 13 20 ??
sha1 (unkeyed) 14 20 ??
hmac-sha1-96-aes128 15 20 [KRB5-AES]
hmac-sha1-96-aes256 16 20 [KRB5-AES]
[reserved] 0x8003 ? [GSS-KRB5]
Linux kernel now mainly supports type 15,16 so max cksum size is 20bytes.
(GSS_KRB5_MAX_CKSUM_LEN)
Re-use already existing define of GSS_KRB5_MAX_SLACK_NEEDED that's used
for encoding the gss_wrap tokens (same tokens are used in reply).
Fixes:
2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacob Pan [Fri, 20 Mar 2020 04:32:30 +0000 (21:32 -0700)]
iommu/vt-d: Fix mm reference leak
[ Upstream commit
902baf61adf6b187f0a6b789e70d788ea71ff5bc ]
Move canonical address check before mmget_not_zero() to avoid mm
reference leak.
Fixes:
9d8c3af31607 ("iommu/vt-d: IOMMU Page Request needs to check if address is canonical.")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jean-Philippe Brucker [Thu, 26 Mar 2020 09:35:57 +0000 (10:35 +0100)]
iommu/virtio: Fix freeing of incomplete domains
[ Upstream commit
7062af3ed2ba451029e3733d9f677c68f5ea9e77 ]
Calling viommu_domain_free() on a domain that hasn't been finalised (not
attached to any device, for example) can currently cause an Oops,
because we attempt to call ida_free() on ID 0, which may either be
unallocated or used by another domain.
Only initialise the vdomain->viommu pointer, which denotes a finalised
domain, at the end of a successful viommu_domain_finalise().
Fixes:
edcd69ab9a32 ("iommu: Add virtio-iommu driver")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200326093558.2641019-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicolas Saenz Julienne [Thu, 26 Mar 2020 12:20:01 +0000 (13:20 +0100)]
drm/vc4: Fix HDMI mode validation
[ Upstream commit
b1e7396a1d0e6af6806337fdaaa44098d6b3343c ]
Current mode validation impedes setting up some video modes which should
be supported otherwise. Namely 1920x1200@60Hz.
Fix this by lowering the minimum HDMI state machine clock to pixel clock
ratio allowed.
Fixes:
32e823c63e90 ("drm/vc4: Reject HDMI modes with too high of clocks.")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326122001.22215-1-nsaenzjulienne@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alan Maguire [Tue, 17 Mar 2020 17:35:34 +0000 (17:35 +0000)]
um: falloc.h needs to be directly included for older libc
[ Upstream commit
35f3401317a3b26aa01fde8facfd320f2628fdcc ]
When building UML with glibc 2.17 installed, compilation
of arch/um/os-Linux/file.c fails due to failure to find
FALLOC_FL_PUNCH_HOLE and FALLOC_FL_KEEP_SIZE definitions.
It appears that /usr/include/bits/fcntl-linux.h (indirectly
included by /usr/include/fcntl.h) does not include falloc.h
with an older glibc, whereas a more up-to-date version
does.
Adding the direct include to file.c resolves the issue
and does not cause problems for more recent glibc.
Fixes:
50109b5a03b4 ("um: Add support for DISCARD in the UBD Driver")
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Moore [Fri, 27 Mar 2020 22:21:09 +0000 (15:21 -0700)]
ACPICA: Fixes for acpiExec namespace init file
[ Upstream commit
9a1ae80412dcaa67a29eecf19de44f32b5f1c357 ]
This is the result of squashing the following ACPICA commit ID's:
6803997e5b4f3635cea6610b51ff69e29d251de3
f31cdf8bfda22fe265c1a176d0e33d311c82a7f7
This change fixes several problems with the support for the
acpi_exec namespace init file (-fi option). Specifically, it
fixes AE_ALREADY_EXISTS errors, as well as various seg faults.
Link: https://github.com/acpica/acpica/commit/f31cdf8b
Link: https://github.com/acpica/acpica/commit/6803997e
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Thu, 19 Mar 2020 11:58:00 +0000 (19:58 +0800)]
f2fs: fix NULL pointer dereference in f2fs_write_begin()
[ Upstream commit
62f63eea291b50a5677ae7503ac128803174698a ]
BUG: kernel NULL pointer dereference, address:
0000000000000000
RIP: 0010:f2fs_write_begin+0x823/0xb90 [f2fs]
Call Trace:
f2fs_quota_write+0x139/0x1d0 [f2fs]
write_blk+0x36/0x80 [quota_tree]
get_free_dqblk+0x42/0xa0 [quota_tree]
do_insert_tree+0x235/0x4a0 [quota_tree]
do_insert_tree+0x26e/0x4a0 [quota_tree]
do_insert_tree+0x26e/0x4a0 [quota_tree]
do_insert_tree+0x26e/0x4a0 [quota_tree]
qtree_write_dquot+0x70/0x190 [quota_tree]
v2_write_dquot+0x43/0x90 [quota_v2]
dquot_acquire+0x77/0x100
f2fs_dquot_acquire+0x2f/0x60 [f2fs]
dqget+0x310/0x450
dquot_transfer+0x7e/0x120
f2fs_setattr+0x11a/0x4a0 [f2fs]
notify_change+0x349/0x480
chown_common+0x168/0x1c0
do_fchownat+0xbc/0xf0
__x64_sys_fchownat+0x20/0x30
do_syscall_64+0x5f/0x220
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Passing fsdata parameter to .write_{begin,end} in f2fs_quota_write(),
so that if quota file is compressed one, we can avoid above NULL
pointer dereference when updating quota content.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guo Ren [Tue, 31 Mar 2020 15:45:52 +0000 (23:45 +0800)]
csky: Fixup get wrong psr value from phyical reg
[ Upstream commit
9c0e343d7654a329d1f9b53d253cbf7fb6eff85d ]
We should get psr value from regs->psr in stack, not directly get
it from phyiscal register then save the vector number in
tsk->trap_no.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Mon, 30 Mar 2020 00:06:45 +0000 (20:06 -0400)]
NFS: Fix memory leaks in nfs_pageio_stop_mirroring()
[ Upstream commit
862f35c94730c9270833f3ad05bd758a29f204ed ]
If we just set the mirror count to 1 without first clearing out
the mirrors, we can leak queued up requests.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Zhang [Wed, 1 Apr 2020 12:06:58 +0000 (20:06 +0800)]
drm/amdkfd: kfree the wrong pointer
[ Upstream commit
3148a6a0ef3cf93570f30a477292768f7eb5d3c3 ]
Originally, it kfrees the wrong pointer for mem_obj.
It would cause memory leak under stress test.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guo Ren [Sat, 28 Mar 2020 11:14:37 +0000 (19:14 +0800)]
csky: Fixup cpu speculative execution to IO area
[ Upstream commit
aefd9461d34a1b0a2acad0750c43216c1c27b9d4 ]
For the memory size ( > 512MB, < 1GB), the MSA setting is:
- SSEG0: PHY_START , PHY_START + 512MB
- SSEG1: PHY_START + 512MB, PHY_START + 1GB
But the real memory is no more than 1GB, there is a gap between the
end size of memory and border of 1GB. CPU could speculatively
execute to that gap and if the gap of the bus couldn't respond to
the CPU request, then the crash will happen.
Now make the setting with:
- SSEG0: PHY_START , PHY_START + 512MB (no change)
- SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB)
We also deprecated zhole_szie[] settings, it's only used by arm
style CPUs. All memory gap should use Reserved setting of dts in
csky system.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Fri, 3 Apr 2020 14:03:45 +0000 (10:03 -0400)]
x86: ACPI: fix CPU hotplug deadlock
[ Upstream commit
696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ]
Similar to commit
0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug
deadlock") except this is for acpi_processor_ffh_cstate_probe():
"The problem is that the work is scheduled on the current CPU from the
hotplug thread associated with that CPU.
It's not required to invoke these functions via the workqueue because
the hotplug thread runs on the target CPU already.
Check whether current is a per cpu thread pinned on the target CPU and
invoke the function directly to avoid the workqueue."
WARNING: possible circular locking dependency detected
------------------------------------------------------
cpuhp/1/15 is trying to acquire lock:
ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630
but task is already holding lock:
ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (cpu_hotplug_lock){++++}-{0:0}:
cpus_read_lock+0x3e/0xc0
irq_calc_affinity_vectors+0x5f/0x91
__pci_enable_msix_range+0x10f/0x9a0
pci_alloc_irq_vectors_affinity+0x13e/0x1f0
pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208
pqi_ctrl_init+0x72f/0x1618 [smartpqi]
pqi_pci_probe.cold.63+0x882/0x892 [smartpqi]
local_pci_probe+0x7a/0xc0
work_for_cpu_fn+0x2e/0x50
process_one_work+0x57e/0xb90
worker_thread+0x363/0x5b0
kthread+0x1f4/0x220
ret_from_fork+0x27/0x50
-> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
__lock_acquire+0x2244/0x32a0
lock_acquire+0x1a2/0x680
__flush_work+0x4e6/0x630
work_on_cpu+0x114/0x160
acpi_processor_ffh_cstate_probe+0x129/0x250
acpi_processor_evaluate_cst+0x4c8/0x580
acpi_processor_get_power_info+0x86/0x740
acpi_processor_hotplug+0xc3/0x140
acpi_soft_cpu_online+0x102/0x1d0
cpuhp_invoke_callback+0x197/0x1120
cpuhp_thread_fun+0x252/0x2f0
smpboot_thread_fn+0x255/0x440
kthread+0x1f4/0x220
ret_from_fork+0x27/0x50
other info that might help us debug this:
Chain exists of:
(work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(cpuidle_lock);
lock(cpuhp_state-up);
lock(cpuidle_lock);
lock((work_completion)(&wfc.work));
*** DEADLOCK ***
3 locks held by cpuhp/1/15:
#0:
ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
#1:
ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
#2:
ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20
Call Trace:
dump_stack+0xa0/0xea
print_circular_bug.cold.52+0x147/0x14c
check_noncircular+0x295/0x2d0
__lock_acquire+0x2244/0x32a0
lock_acquire+0x1a2/0x680
__flush_work+0x4e6/0x630
work_on_cpu+0x114/0x160
acpi_processor_ffh_cstate_probe+0x129/0x250
acpi_processor_evaluate_cst+0x4c8/0x580
acpi_processor_get_power_info+0x86/0x740
acpi_processor_hotplug+0xc3/0x140
acpi_soft_cpu_online+0x102/0x1d0
cpuhp_invoke_callback+0x197/0x1120
cpuhp_thread_fun+0x252/0x2f0
smpboot_thread_fn+0x255/0x440
kthread+0x1f4/0x220
ret_from_fork+0x27/0x50
Signed-off-by: Qian Cai <cai@lca.pw>
Tested-by: Borislav Petkov <bp@suse.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ricardo Ribalda Delgado [Wed, 1 Apr 2020 09:51:47 +0000 (11:51 +0200)]
leds: core: Fix warning message when init_data
[ Upstream commit
64ed6588c2ea618d3f9ca9d8b365ae4c19f76225 ]
The warning message when a led is renamed due to name collition can fail
to show proper original name if init_data is used. Eg:
[ 9.073996] leds-gpio
a0040000.leds_0: Led (null) renamed to red_led_1 due to name collision
Fixes:
bb4e9af0348d ("leds: core: Add support for composing LED class device names")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Karol Herbst [Tue, 24 Mar 2020 20:29:23 +0000 (21:29 +0100)]
drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges
[ Upstream commit
434fdb51513bf3057ac144d152e6f2f2b509e857 ]
Fixes the infamous 'runtime PM' bug many users are facing on Laptops with
Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.
Depending on the used kernel there might be messages like those in demsg:
"nouveau 0000:01:00.0: Refused to change power state, currently in D3"
"nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config
space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.
It's still unkown why this issue exists, but this is a reliable workaround
and solves a very annoying issue for user having to choose between a
crashing kernel or higher power consumption of their Laptops.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Mika Westerberg <mika.westerberg@intel.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Hildenbrand [Fri, 3 Apr 2020 15:30:48 +0000 (17:30 +0200)]
KVM: s390: vsie: Fix possible race when shadowing region 3 tables
[ Upstream commit
1493e0f944f3c319d11e067c185c904d01c17ae5 ]
We have to properly retry again by returning -EINVAL immediately in case
somebody else instantiated the table concurrently. We missed to add the
goto in this function only. The code now matches the other, similar
shadowing functions.
We are overwriting an existing region 2 table entry. All allocated pages
are added to the crst_list to be freed later, so they are not lost
forever. However, when unshadowing the region 2 table, we wouldn't trigger
unshadowing of the original shadowed region 3 table that we replaced. It
would get unshadowed when the original region 3 table is modified. As it's
not connected to the page table hierarchy anymore, it's not going to get
used anymore. However, for a limited time, this page table will stick
around, so it's in some sense a temporary memory leak.
Identified by manual code inspection. I don't think this classifies as
stable material.
Fixes:
998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vegard Nossum [Tue, 7 Apr 2020 03:09:37 +0000 (20:09 -0700)]
compiler.h: fix error in BUILD_BUG_ON() reporting
[ Upstream commit
af9c5d2e3b355854ff0e4acfbfbfadcd5198a349 ]
compiletime_assert() uses __LINE__ to create a unique function name. This
means that if you have more than one BUILD_BUG_ON() in the same source
line (which can happen if they appear e.g. in a macro), then the error
message from the compiler might output the wrong condition.
For this source file:
#include <linux/build_bug.h>
#define macro() \
BUILD_BUG_ON(1); \
BUILD_BUG_ON(0);
void foo()
{
macro();
}
gcc would output:
./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_9' declared with attribute error: BUILD_BUG_ON failed: 0
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
However, it was not the BUILD_BUG_ON(0) that failed, so it should say 1
instead of 0. With this patch, we use __COUNTER__ instead of __LINE__, so
each BUILD_BUG_ON() gets a different function name and the correct
condition is printed:
./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_0' declared with attribute error: BUILD_BUG_ON failed: 1
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Daniel Santos <daniel.santos@pobox.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200331112637.25047-1-vegard.nossum@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Tue, 7 Apr 2020 03:10:25 +0000 (20:10 -0700)]
percpu_counter: fix a data race at vm_committed_as
[ Upstream commit
7e2345200262e4a6056580f0231cccdaffc825f3 ]
"vm_committed_as.count" could be accessed concurrently as reported by
KCSAN,
BUG: KCSAN: data-race in __vm_enough_memory / percpu_counter_add_batch
write to 0xffffffff9451c538 of 8 bytes by task 65879 on cpu 35:
percpu_counter_add_batch+0x83/0xd0
percpu_counter_add_batch at lib/percpu_counter.c:91
__vm_enough_memory+0xb9/0x260
dup_mm+0x3a4/0x8f0
copy_process+0x2458/0x3240
_do_fork+0xaa/0x9f0
__do_sys_clone+0x125/0x160
__x64_sys_clone+0x70/0x90
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
read to 0xffffffff9451c538 of 8 bytes by task 66773 on cpu 19:
__vm_enough_memory+0x199/0x260
percpu_counter_read_positive at include/linux/percpu_counter.h:81
(inlined by) __vm_enough_memory at mm/util.c:839
mmap_region+0x1b2/0xa10
do_mmap+0x45c/0x700
vm_mmap_pgoff+0xc0/0x130
ksys_mmap_pgoff+0x6e/0x300
__x64_sys_mmap+0x33/0x40
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The read is outside percpu_counter::lock critical section which results in
a data race. Fix it by adding a READ_ONCE() in
percpu_counter_read_positive() which could also service as the existing
compiler memory barrier.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/1582302724-2804-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steven Price [Tue, 7 Apr 2020 03:08:43 +0000 (20:08 -0700)]
include/linux/swapops.h: correct guards for non_swap_entry()
[ Upstream commit
3f3673d7d324d872d9d8ddb73b3e5e47fbf12e0d ]
If CONFIG_DEVICE_PRIVATE is defined, but neither CONFIG_MEMORY_FAILURE nor
CONFIG_MIGRATION, then non_swap_entry() will return 0, meaning that the
condition (non_swap_entry(entry) && is_device_private_entry(entry)) in
zap_pte_range() will never be true even if the entry is a device private
one.
Equally any other code depending on non_swap_entry() will not function as
expected.
I originally spotted this just by looking at the code, I haven't actually
observed any problems.
Looking a bit more closely it appears that actually this situation
(currently at least) cannot occur:
DEVICE_PRIVATE depends on ZONE_DEVICE
ZONE_DEVICE depends on MEMORY_HOTREMOVE
MEMORY_HOTREMOVE depends on MIGRATION
Fixes:
5042db43cc26 ("mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200305130550.22693-1-steven.price@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ralph Campbell [Wed, 4 Mar 2020 00:13:36 +0000 (16:13 -0800)]
drm/nouveau/svm: fix vma range check for migration
[ Upstream commit
b92103b559c77abc5f8b7bec269230a219c880b7 ]
find_vma_intersection(mm, start, end) only guarantees that end is greater
than or equal to vma->vm_start but doesn't guarantee that start is
greater than or equal to vma->vm_start. The calculation for the
intersecting range in nouveau_svmm_bind() isn't accounting for this and
can call migrate_vma_setup() with a starting address less than
vma->vm_start. This results in migrate_vma_setup() returning -EINVAL for
the range instead of nouveau skipping that part of the range and migrating
the rest.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ralph Campbell [Wed, 4 Mar 2020 00:13:37 +0000 (16:13 -0800)]
drm/nouveau/svm: check for SVM initialized before migrating
[ Upstream commit
822cab6150d3002952407a8297ff5a0d32bb7b54 ]
When migrating system memory to GPU memory, check that SVM has been
enabled. Even though most errors can be ignored since migration is
a performance optimization, return an error because this is a violation
of the API.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Thu, 2 Apr 2020 04:11:54 +0000 (21:11 -0700)]
mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS
[ Upstream commit
bb297bb2de517e41199185021f043bbc5d75b377 ]
When CONFIG_HUGETLB_PAGE is set but not CONFIG_HUGETLBFS, the following
build failure is encoutered:
In file included from arch/powerpc/mm/fault.c:33:0:
include/linux/hugetlb.h: In function 'hstate_inode':
include/linux/hugetlb.h:477:9: error: implicit declaration of function 'HUGETLBFS_SB' [-Werror=implicit-function-declaration]
return HUGETLBFS_SB(i->i_sb)->hstate;
^
include/linux/hugetlb.h:477:30: error: invalid type argument of '->' (have 'int')
return HUGETLBFS_SB(i->i_sb)->hstate;
^
Gate hstate_inode() with CONFIG_HUGETLBFS instead of CONFIG_HUGETLB_PAGE.
Fixes:
a137e1cc6d6e ("hugetlbfs: per mount huge page sizes")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Link: http://lkml.kernel.org/r/7e8c3a3c9a587b9cd8a2f146df32a421b961f3a2.1584432148.git.christophe.leroy@c-s.fr
Link: https://patchwork.ozlabs.org/patch/1255548/#2386036
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Long Li [Fri, 27 Mar 2020 05:09:20 +0000 (22:09 -0700)]
cifs: Allocate encryption header through kmalloc
[ Upstream commit
3946d0d04bb360acca72db5efe9ae8440012d9dc ]
When encryption is used, smb2_transform_hdr is defined on the stack and is
passed to the transport. This doesn't work with RDMA as the buffer needs to
be DMA'ed.
Fix it by using kmalloc.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gabriel Krisman Bertazi [Tue, 17 Mar 2020 00:45:06 +0000 (20:45 -0400)]
um: ubd: Prevent buffer overrun on command completion
[ Upstream commit
6e682d53fc1ef73a169e2a5300326cb23abb32ee ]
On the hypervisor side, when completing commands and the pipe is full,
we retry writing only the entries that failed, by offsetting
io_req_buffer, but we don't reduce the number of bytes written, which
can cause a buffer overrun of io_req_buffer, and write garbage to the
pipe.
Cc: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log