review.tizen.org Git - platform/kernel/linux-rpi.git/log

bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves

BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with
following testcase:

  # ip netns add ns1
  # ip netns exec ns1 ip link add bond0 type bond mode 0
  # ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
  # ip netns exec ns1 ip link set bond_slave_1 master bond0
  # ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link set bond_slave_1 nomaster
  # ip netns del ns1

The logical analysis of the problem is as follows:

1. create ETH_P_8021AD protocol vlan10 for bond_slave_1:
register_vlan_dev()
  vlan_vid_add()
    vlan_info_alloc()
    __vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1

2. create ETH_P_8021AD protocol bond0_vlan10 for bond0:
register_vlan_dev()
  vlan_vid_add()
    __vlan_vid_add()
      vlan_add_rx_filter_info()
          if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER
              return 0;

          if (netif_device_present(dev))
              return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called
              // The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid.

3. detach bond_slave_1 from bond0:
__bond_release_one()
  vlan_vids_del_by_dev()
    list_for_each_entry(vid_info, &vlan_info->vid_list, list)
        vlan_vid_del(dev, vid_info->proto, vid_info->vid);
        // bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted.
        // bond_slave_1->vlan_info will be assigned NULL.

4. delete vlan10 during delete ns1:
default_device_exit_batch()
  dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10
    vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1
BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!!

Add S-VLAN tag related features support to bond driver. So the bond driver
will always propagate the VLAN info to its slaves.

Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ionic: Add missing err handling for queue reconfig

ionic_start_queues_reconfig returns an error code if txrx_init fails.
Handle this error code in the relevant places.

This fixes a corner case where the device could get left in a detached
state if the CMB reconfig fails and the attempt to clean up the mess
also fails. Note that calling netif_device_attach when the netdev is
already attached does not lead to unexpected behavior.

Change goto name "errout" to "err_out" to maintain consistency across
goto statements.

Fixes: 40bc471dc714 ("ionic: add tx/rx-push support with device Component Memory Buffers")
Fixes: 6f7d6f0fd7a3 ("ionic: pull reset_queues into tx_timeout handler")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers: vxlan: vnifilter: free percpu vni stats on error path

In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the
allocated percpu vni stats are not freed on the error path.

Introduce vxlan_vni_free() which would work as a nice wrapper to free
vxlan_vni_node resources properly.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

macsec: use DEV_STATS_INC()

syzbot/KCSAN reported data-races in macsec whenever dev->stats fields
are updated.

It appears all of these updates can happen from multiple cpus.

Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: tls: avoid discarding data on record close

TLS records end with a 16B tag. For TLS device offload we only
need to make space for this tag in the stream, the device will
generate and replace it with the actual calculated tag.

Long time ago the code would just re-reference the head frag
which mostly worked but was suboptimal because it prevented TCP
from combining the record into a single skb frag. I'm not sure
if it was correct as the first frag may be shorter than the tag.

The commit under fixes tried to replace that with using the page
frag and if the allocation failed rolling back the data, if record
was long enough. It achieves better fragment coalescing but is
also buggy.

We don't roll back the iterator, so unless we're at the end of
send we'll skip the data we designated as tag and start the
next record as if the rollback never happened.
There's also the possibility that the record was constructed
with MSG_MORE and the data came from a different syscall and
we already told the user space that we "got it".

Allocate a single dummy page and use it as fallback.

Found by code inspection, and proven by forcing allocation
failures.

Fixes: e7b159a48ba6 ("net/tls: remove the record tail optimization")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

dccp: fix data-race around dp->dccps_mss_cache

dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().

Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked.

Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803163021.2958262-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-more-fixes-for-v6-5'

Matthieu Baerts says:

====================
mptcp: more fixes for v6.5

Here is a new batch of fixes related to MPTCP for v6.5 and older.

Patches 1 and 2 fix issues with MPTCP Join selftest when manually
launched with '-i' parameter to use 'ip mptcp' tool instead of the
dedicated one (pm_nl_ctl). The issues have been there since v5.18.

Thank you Andrea for your first contributions to MPTCP code in the
upstream kernel!

Patch 3 avoids corrupting the data stream when trying to reset
connections that have fallen back to TCP. This can happen from v6.1.

Patch 4 fixes a race when doing a disconnect() and an accept() in
parallel on a listener socket. The issue only happens in rare cases if
the user is really unlucky since a fix that landed in v6.3 but
backported up to v6.1.
====================

Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-0-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix disconnect vs accept race

Despite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.

The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.

As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:

BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330
Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89
RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300
RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a
RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020
R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880
FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_accept+0x1ae/0x260 net/socket.c:1872
__sys_accept4+0x9b/0x110 net/socket.c:1913
__do_sys_accept4 net/socket.c:1954 [inline]
__se_sys_accept4 net/socket.c:1951 [inline]
__x64_sys_accept4+0x20/0x30 net/socket.c:1951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.

After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal.

Fixes: 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/423
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: avoid bogus reset on fallback close

Since the blamed commit, the MPTCP protocol unconditionally sends
TCP resets on all the subflows on disconnect().

That fits full-blown MPTCP sockets - to implement the fastclose
mechanism - but causes unexpected corruption of the data stream,
caught as sporadic self-tests failures.

Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/419
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-3-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: fix 'implicit EP' test

mptcp_join 'implicit EP' test currently fails when using ip mptcp:

  $ ./mptcp_join.sh -iI
  <snip>
  001 implicit EP    creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
  Error: too many addresses or duplicate one: -22.
                     ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
                     modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal '

This happens because of two reasons:
- iproute v6.3.0 does not support the implicit flag, fixed with
  iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit
  flag")
- pm_nl_check_endpoint wrongly expects the ip address to be repeated two
  times in iproute output, and does not account for a final whitespace
  in it.

This fixes the issue trimming the whitespace in the output string and
removing the double address in the expected string.

Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: fix 'delete and re-add' test

mptcp_join 'delete and re-add' test fails when using ip mptcp:

  $ ./mptcp_join.sh -iI
  <snip>
  002 delete and re-add                    before delete[ ok ]
                                           mptcp_info subflows=1         [ ok ]
  Error: argument "ADDRESS" is wrong: invalid for non-zero id address
                                           after delete[fail] got 2:2 subflows expected 1

This happens because endpoint delete includes an ip address while id is
not 0, contrary to what is indicated in the ip mptcp man page:

"When used with the delete id operation, an IFADDR is only included when
the ID is 0."

This fixes the issue using the $addr variable in pm_nl_del_endpoint()
only when id is 0.

Fixes: 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tunnels-fix-ipv4-pmtu-icmp-checksum'

Florian Westphal says:

====================
tunnels: fix ipv4 pmtu icmp checksum

The checksum of the generated ipv4 icmp pmtud message is
only correct if the skb that causes the icmp error generation
is linear.

Fix this and add a selftest for this.
====================

Link: https://lore.kernel.org/r/20230803152653.29535-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: test vxlan pmtu exceptions with tcp

TCP might get stuck if a nonlinear skb exceeds the path MTU,
icmp error contains an incorrect icmp checksum in that case.

Extend the existing test for vxlan to also send at least 1MB worth of
data via TCP in addition to the existing 'large icmp packet adds
route exception'.

On my test VM this fails due to 0-size output file without
"tunnels: fix kasan splat when generating ipv4 pmtu error".

Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tunnels: fix kasan splat when generating ipv4 pmtu error

If we try to emit an icmp error in response to a nonliner skb, we get

BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]

ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck.

Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/packet: annotate data-races around tp->status

Another syzbot report [1] is about tp->status lockless reads
from __packet_get_status()

[1]
BUG: KCSAN: data-race in __packet_rcv_has_room / __packet_set_status

write to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 0:
__packet_set_status+0x78/0xa0 net/packet/af_packet.c:407
tpacket_rcv+0x18bb/0x1a60 net/packet/af_packet.c:2483
deliver_skb net/core/dev.c:2173 [inline]
__netif_receive_skb_core+0x408/0x1e80 net/core/dev.c:5337
__netif_receive_skb_one_core net/core/dev.c:5491 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x57/0xa0 kernel/softirq.c:650
sysvec_apic_timer_interrupt+0x6d/0x80 arch/x86/kernel/apic/apic.c:1106
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:645
smpboot_thread_fn+0x33c/0x4a0 kernel/smpboot.c:112
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

read to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 1:
__packet_get_status net/packet/af_packet.c:436 [inline]
packet_lookup_frame net/packet/af_packet.c:524 [inline]
__tpacket_has_room net/packet/af_packet.c:1255 [inline]
__packet_rcv_has_room+0x3f9/0x450 net/packet/af_packet.c:1298
tpacket_rcv+0x275/0x1a60 net/packet/af_packet.c:2285
deliver_skb net/core/dev.c:2173 [inline]
dev_queue_xmit_nit+0x38a/0x5e0 net/core/dev.c:2243
xmit_one net/core/dev.c:3574 [inline]
dev_hard_start_xmit+0xcf/0x3f0 net/core/dev.c:3594
__dev_queue_xmit+0xefb/0x1d10 net/core/dev.c:4244
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
can_send+0x4eb/0x5d0 net/can/af_can.c:276
bcm_can_tx+0x314/0x410 net/can/bcm.c:302
bcm_tx_timeout_handler+0xdb/0x260
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x217/0x700 kernel/time/hrtimer.c:1749
hrtimer_run_softirq+0xd6/0x120 kernel/time/hrtimer.c:1766
__do_softirq+0xc1/0x265 kernel/softirq.c:571
run_ksoftirqd+0x17/0x20 kernel/softirq.c:939
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

value changed: 0x0000000000000000 -> 0x0000000020000081

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 6.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023

Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230803145600.2937518-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: ocelot: call dsa_tag_8021q_unregister() under rtnl_lock() on driver remove

When the tagging protocol in current use is "ocelot-8021q" and we unbind
the driver, we see this splat:

$ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind
mscc_felix 0000:00:00.5 swp0: left promiscuous mode
sja1105 spi2.0: Link is Down
DSA: tree 1 torn down
mscc_felix 0000:00:00.5 swp2: left promiscuous mode
sja1105 spi2.2: Link is Down
DSA: tree 3 torn down
fsl_enetc 0000:00:00.2 eno2: left promiscuous mode
mscc_felix 0000:00:00.5: Link is Down
------------[ cut here ]------------
RTNL: assertion failed at net/dsa/tag_8021q.c (409)
WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0
Modules linked in:
CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771
pc : dsa_tag_8021q_unregister+0x12c/0x1a0
lr : dsa_tag_8021q_unregister+0x12c/0x1a0
Call trace:
dsa_tag_8021q_unregister+0x12c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
RTNL: assertion failed at net/8021q/vlan_core.c (376)
WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0
CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771
pc : vlan_vid_del+0x1b8/0x1f0
lr : vlan_vid_del+0x1b8/0x1f0
dsa_tag_8021q_unregister+0x8c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
DSA: tree 0 torn down

This was somewhat not so easy to spot, because "ocelot-8021q" is not the
default tagging protocol, and thus, not everyone who tests the unbinding
path may have switched to it beforehand. The default
felix_tag_npi_teardown() does not require rtnl_lock() to be held.

Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230803134253.2711124-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix the incorrect judgment for msk->cb_flags

Coccicheck reports the error below:
net/mptcp/protocol.c:3330:15-28: ERROR: test of a variable/field address

Since the address of msk->cb_flags is used in __test_and_clear_bit, the
address should not be NULL. The judgment for if (unlikely(msk->cb_flags))
will always be true, we should check the real value of msk->cb_flags here.

Fixes: 65a569b03ca8 ("mptcp: optimize release_cb for the common case")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803072438.1847500-1-xiangyang3@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'at803x-wol'

Li Yang says:

====================
fix at803x wol setting

v3:
  Break long lines
  Add back error checking of phy_read

v4:
  Disable WoL in 1588 register for AR8031 in probe
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: at803x: remove set/get wol callbacks for AR8032

Since the AR8032 part does not support wol, remove related callbacks
from it.

Fixes: 5800091a2061 ("net: phy: at803x: add support for AR8032 PHY")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Cc: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: at803x: fix the wol setting functions

In commit 7beecaf7d507 ("net: phy: at803x: improve the WOL feature"), it
seems not correct to use a wol_en bit in a 1588 Control Register which is
only available on AR8031/AR8033(share the same phy_id) to determine if WoL
is enabled.  Change it back to use AT803X_INTR_ENABLE_WOL for determining
the WoL status which is applicable on all chips supporting wol. Also update
the at803x_set_wol() function to only update the 1588 register on chips
having it.  After this change, disabling wol at probe from commit
d7cd5e06c9dd ("net: phy: at803x: disable WOL at probe") is no longer
needed.  Change it to just disable the WoL bit in 1588 register for
AR8031/AR8033 to be aligned with AT803X_INTR_ENABLE_WOL in probe.

Fixes: 7beecaf7d507 ("net: phy: at803x: improve the WOL feature")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

mISDN: Update parameter type of dsp_cmx_send()

When booting a kernel with CONFIG_MISDN_DSP=y and CONFIG_CFI_CLANG=y,
there is a failure when dsp_cmx_send() is called indirectly from
call_timer_fn():

[ 0.371412] CFI failure at call_timer_fn+0x2f/0x150 (target: dsp_cmx_send+0x0/0x530; expected type: 0x92ada1e9)

The function pointer prototype that call_timer_fn() expects is

void (*fn)(struct timer_list *)

whereas dsp_cmx_send() has a parameter type of 'void *', which causes
the control flow integrity checks to fail because the parameter types do
not match.

Change dsp_cmx_send()'s parameter type to be 'struct timer_list' to
match the expected prototype. The argument is unused anyways, so this
has no functional change, aside from avoiding the CFI failure.

Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308020936.58787e6c-oliver.sang@intel.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: e313ac12eb13 ("mISDN: Convert timers to use timer_setup()")
Link: https://lore.kernel.org/r/20230802-fix-dsp_cmx_send-cfi-failure-v1-1-2f2e79b0178d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.5-rc5' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and wireless.

  Nothing scary here. Feels like the first wave of regressions from v6.5
  is addressed - one outstanding fix still to come in TLS for the
  sendpage rework.

  Current release - regressions:

   - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES

   - dsa: fix older DSA drivers using phylink

  Previous releases - regressions:

   - gro: fix misuse of CB in udp socket lookup

   - mlx5: unregister devlink params in case interface is down

   - Revert "wifi: ath11k: Enable threaded NAPI"

  Previous releases - always broken:

   - sched: cls_u32: fix match key mis-addressing

   - sched: bind logic fixes for cls_fw, cls_u32 and cls_route

   - add bound checks to a number of places which hand-parse netlink

   - bpf: disable preemption in perf_event_output helpers code

   - qed: fix scheduling in a tasklet while getting stats

   - avoid using APIs which are not hardirq-safe in couple of drivers,
     when we may be in a hard IRQ (netconsole)

   - wifi: cfg80211: fix return value in scan logic, avoid page
     allocator warning

   - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D
     (DBDC)

  Misc:

   - drop handful of inactive maintainers, put some new in place"

* tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits)
  MAINTAINERS: update TUN/TAP maintainers
  test/vsock: remove vsock_perf executable on `make clean`
  tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen
  tcp_metrics: annotate data-races around tm->tcpm_net
  tcp_metrics: annotate data-races around tm->tcpm_vals[]
  tcp_metrics: annotate data-races around tm->tcpm_lock
  tcp_metrics: annotate data-races around tm->tcpm_stamp
  tcp_metrics: fix addr_same() helper
  prestera: fix fallback to previous version on same major version
  udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
  net/mlx5e: Set proper IPsec source port in L4 selector
  net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio
  net/mlx5: fs_core: Make find_closest_ft more generic
  wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
  vxlan: Fix nexthop hash size
  ip6mr: Fix skb_under_panic in ip6mr_cache_report()
  s390/qeth: Don't call dev_close/dev_open (DOWN/UP)
  net: tap_open(): set sk_uid from current_fsuid()
  net: tun_chr_open(): set sk_uid from current_fsuid()
  net: dcb: choose correct policy to parse DCB_ATTR_BCN
  ...

MAINTAINERS: update TUN/TAP maintainers

Willem and Jason have agreed to take over the maintainer
duties for TUN/TAP, thank you!

There's an existing entry for TUN/TAP which only covers
the user mode Linux implementation.
Since we haven't heard from Maxim on the list for almost
a decade, extend that entry and take it over, rather than
adding a new one.

Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230802182843.4193099-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Martin KaFai Lau says:

====================
pull-request: bpf 2023-08-03

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 3 files changed, 37 insertions(+), 20 deletions(-).

The main changes are:

1) Disable preemption in perf_event_output helpers code,
   from Jiri Olsa

2) Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing,
   from Lin Ma

3) Multiple warning splat fixes in cpumap from Hou Tao

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, cpumap: Handle skb as well when clean up ptr_ring
  bpf, cpumap: Make sure kthread is running before map update returns
  bpf: Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing
  bpf: Disable preemption in bpf_event_output
  bpf: Disable preemption in bpf_perf_event_output
====================

Link: https://lore.kernel.org/r/20230803181429.994607-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2023-08-03' of git://git./linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.5

We did some house cleaning in MAINTAINERS file so several patches
about that. Few regressions fixed and also fix some recently enabled
memcpy() warnings. Only small commits and nothing special standing
out.

* tag 'wireless-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
  wifi: ray_cs: Replace 1-element array with flexible array
  MAINTAINERS: add Jeff as ath10k, ath11k and ath12k maintainer
  MAINTAINERS: wifi: mark mlw8k as orphan
  MAINTAINERS: wifi: mark b43 as orphan
  MAINTAINERS: wifi: mark zd1211rw as orphan
  MAINTAINERS: wifi: mark wl3501 as orphan
  MAINTAINERS: wifi: mark rndis_wlan as orphan
  MAINTAINERS: wifi: mark ar5523 as orphan
  MAINTAINERS: wifi: mark cw1200 as orphan
  MAINTAINERS: wifi: atmel: mark as orphan
  MAINTAINERS: wifi: rtw88: change Ping as the maintainer
  Revert "wifi: ath6k: silence false positive -Wno-dangling-pointer warning on GCC 12"
  wifi: cfg80211: Fix return value in scan logic
  Revert "wifi: ath11k: Enable threaded NAPI"
  MAINTAINERS: Update mwifiex maintainer list
  wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC)
====================

Link: https://lore.kernel.org/r/20230803140058.57476C433C9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

test/vsock: remove vsock_perf executable on `make clean`

We forgot to add vsock_perf to the rm command in the `clean`
target, so now we have a left over after `make clean` in
tools/testing/vsock.

Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility")
Cc: AVKrasnov@sberdevices.ru
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20230803085454.30897-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tcp_metrics-series-of-fixes'

Eric Dumazet says:

====================
tcp_metrics: series of fixes

This series contains a fix for addr_same() and various
data-race annotations.

We still have to address races over tm->tcpm_saddr and
tm->tcpm_daddr later.
====================

Link: https://lore.kernel.org/r/20230802131500.1478140-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen

Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst()
would overwrite data that could be read from tcp_fastopen_cache_get()
or tcp_metrics_fill_info().

We need to acquire fastopen_seqlock to maintain consistency.

For newly allocated objects, tcpm_new() can switch to kzalloc()
to avoid an extra fastopen_seqlock acquisition.

Fixes: 1fe4c481ba63 ("net-tcp: Fast Open client - cookie cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_net

tm->tcpm_net can be read or written locklessly.

Instead of changing write_pnet() and read_pnet() and potentially
hurt performance, add the needed READ_ONCE()/WRITE_ONCE()
in tm_net() and tcpm_new().

Fixes: 849e8a0ca8d5 ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_vals[]

tm->tcpm_vals[] values can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this,
and force use of tcp_metric_get() and tcp_metric_set()

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_lock

tm->tcpm_lock can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this.

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_stamp

tm->tcpm_stamp can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this.

Also constify tcpm_check_stamp() dst argument.

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: fix addr_same() helper

Because v4 and v6 families use separate inetpeer trees (respectively
net->ipv4.peers and net->ipv6.peers), inetpeer_addr_cmp(a, b) assumes
a & b share the same family.

tcp_metrics use a common hash table, where entries can have different
families.

We must therefore make sure to not call inetpeer_addr_cmp()
if the families do not match.

Fixes: d39d14ffa24c ("net: Add helper function to compare inetpeer addresses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

prestera: fix fallback to previous version on same major version

When both supported and previous version have the same major version,
and the firmwares are missing, the driver ends in a loop requesting the
same (previous) version over and over again:

    [   76.327413] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
    [   76.339802] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.352162] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.364502] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.376848] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.389183] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.401522] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.413860] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.426199] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    ...

Fix this by inverting the check to that we aren't yet at the previous
version, and also check the minor version.

This also catches the case where both versions are the same, as it was
after commit bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0
support").

With this fix applied:

    [   88.499622] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
    [   88.511995] Prestera DX 0000:01:00.0: failed to request previous firmware: mrvl/prestera/mvsw_prestera_fw-v4.0.img
    [   88.522403] Prestera DX: probe of 0000:01:00.0 failed with error -2

Fixes: 47f26018a414 ("net: marvell: prestera: try to load previous fw version")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Taras Chornyi <taras.chornyi@plvision.eu>
Link: https://lore.kernel.org/r/20230802092357.163944-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nfsd-6.5-3' of git://git./linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

- Fix tmpfs splice read support

* tag 'nfsd-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: Fix reading via splice

Merge tag 'erofs-for-6.5-rc5-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:

- Fix data corruption caused by insufficient decompression on
   deduplicated compressed extents

- Drop a useless s_magic checking in erofs_kill_sb()

* tag 'erofs-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: drop unnecessary WARN_ON() in erofs_kill_sb()
  erofs: fix wrong primary bvec selection on deduplicated extents

Merge tag 's390-6.5-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

- Split kernel large page mappings into 4k mappings in case debug
   pagealloc is enabled again. This got accidentally removed by commit
   bb1520d581a3 ("s390/mm: start kernel with DAT enabled")

- Fix error handling in KVM's sthyi handling

- Add missing include to s390's uapi ptrace.h

- Update defconfigs

* tag 's390-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ptrace: add missing linux/const.h include
  KVM: s390: fix sthyi error handling
  s390: update defconfigs
  s390/vmem: split pages when debug pagealloc is enabled

udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES

__ip_append_data() can get into an infinite loop when asked to splice into
a partially-built UDP message that has more than the frag-limit data and up
to the MTU limit.  Something like:

        pipe(pfd);
        sfd = socket(AF_INET, SOCK_DGRAM, 0);
        connect(sfd, ...);
        send(sfd, buffer, 8161, MSG_CONFIRM|MSG_MORE);
        write(pfd[1], buffer, 8);
        splice(pfd[0], 0, sfd, 0, 0x4ffe0ul, 0);

where the amount of data given to send() is dependent on the MTU size (in
this instance an interface with an MTU of 8192).

The problem is that the calculation of the amount to copy in
__ip_append_data() goes negative in two places, and, in the second place,
this gets subtracted from the length remaining, thereby increasing it.

This happens when pagedlen > 0 (which happens for MSG_ZEROCOPY and
MSG_SPLICE_PAGES), because the terms in:

        copy = datalen - transhdrlen - fraggap - pagedlen;

then mostly cancel when pagedlen is substituted for, leaving just -fraggap.
This causes:

        length -= copy + transhdrlen;

to increase the length to more than the amount of data in msg->msg_iter,
which causes skb_splice_from_iter() to be unable to fill the request and it
returns less than 'copied' - which means that length never gets to 0 and we
never exit the loop.

Fix this by:

(1) Insert a note about the dodgy calculation of 'copy'.

(2) If MSG_SPLICE_PAGES, clear copy if it is negative from the above
     equation, so that 'offset' isn't regressed and 'length' isn't
     increased, which will mean that length and thus copy should match the
     amount left in the iterator.

(3) When handling MSG_SPLICE_PAGES, give a warning and return -EIO if
     we're asked to splice more than is in the iterator.  It might be
     better to not give the warning or even just give a 'short' write.

[!] Note that this ought to also affect MSG_ZEROCOPY, but MSG_ZEROCOPY
avoids the problem by simply assuming that everything asked for got copied,
not just the amount that was in the iterator.  This is a potential bug for
the future.

Fixes: 7ac7c987850c ("udp: Convert udp_sendpage() to use MSG_SPLICE_PAGES")
Reported-by: syzbot+f527b971b4bdc8e79f9e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000881d0606004541d1@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1420063.1690904933@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlx5-ipsec-fixes'

Leon Romanovsky says:

====================
mlx5 IPsec fixes

The following patches are combination of Jianbo's work on IPsec eswitch mode
together with our internal review toward addition of TCP protocol selectors
support to IPSec packet offload.

Despite not-being fix, the first patch helps us to make second one more
clear, so I'm asking to apply it anyway as part of this series.
====================

Link: https://lore.kernel.org/r/cover.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Set proper IPsec source port in L4 selector

Fix typo in setup_fte_upper_proto_match() where destination UDP port
was used instead of source port.

Fixes: a7385187a386 ("net/mlx5e: IPsec, support upper protocol selector field offload")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/ffc024a4d192113103f392b0502688366ca88c1f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio

In the cited commit, new type of FS_TYPE_PRIO_CHAINS fs_prio was added
to support multiple parallel namespaces for multi-chains. And we skip
all the flow tables under the fs_node of this type unconditionally,
when searching for the next or previous flow table to connect for a
new table.

As this search function is also used for find new root table when the
old one is being deleted, it will skip the entire FS_TYPE_PRIO_CHAINS
fs_node next to the old root. However, new root table should be chosen
from it if there is any table in it. Fix it by skipping only the flow
tables in the same FS_TYPE_PRIO_CHAINS fs_node when finding the
closest FT for a fs_node.

Besides, complete the connecting from FTs of previous priority of prio
because there should be multiple prevs after this fs_prio type is
introduced. And also the next FT should be chosen from the first flow
table next to the prio in the same FS_TYPE_PRIO_CHAINS fs_prio, if
this prio is the first child.

Fixes: 328edb499f99 ("net/mlx5: Split FDB fast path prio to multiple namespaces")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/7a95754df479e722038996c97c97b062b372591f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: fs_core: Make find_closest_ft more generic

As find_closest_ft_recursive is called to find the closest FT, the
first parameter of find_closest_ft can be changed from fs_prio to
fs_node. Thus this function is extended to find the closest FT for the
nodes of any type, not only prios, but also the sub namespaces.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/d3962c2b443ec8dde7a740dc742a1f052d5e256c.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'soc-fixes-6.5-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms get a lone dts fix each:

   - SoCFPGA: Fix incorrect I2C property for SCL signal

   - Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and
     RZ/V2L.

   - Juno/Vexpress: remove a dangling symlink

   - at91: sam9x60 SoC detection compatible strings

   - nspire: Fix arm primecell compatible string

  On the NXP i.MX platform, there multiple issues that get addressed:

   - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
     frequency of sk-imx53 board

   - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux

   - A couple of imx8mm-venice fixes from Tim Harvey to diable
     disp_blk_ctrl

   - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
     VPU label and gpio-line-names

   - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as
     bus_power_dev child, so that runtime PM can translate into the
     necessary GPC power domain action

  On the driver side, there are two fixes for tegra memory controller
  drivers addressing regressions from the merge window, a couple of
  minor correctness fixes for SCMI and SMCCC firmware, as well as a
  build fix for an lcd backlight driver"

* tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
  backlight: corgi_lcd: fix missing prototype
  memory: tegra: make icc_set_bw return zero if BWMGR not supported
  arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
  dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60
  ARM: dts: at91: sam9x60: fix the SOC detection
  ARM: dts: nspire: Fix arm primecell compatible string
  firmware: arm_scmi: Fix chan_free cleanup on SMC
  firmware: arm_scmi: Drop OF node reference in the transport channel setup
  soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
  ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
  firmware: arm_scmi: Fix signed error return values handling
  firmware: smccc: Fix use of uninitialised results structure
  arm64: dts: freescale: Fix VPU G2 clock
  arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
  arm64: dts: phycore-imx8mm: Correction in gpio-line-names
  arm64: dts: phycore-imx8mm: Label typo-fix of VPU
  ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
  arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
  arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
  arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
  ...

Merge tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux

Pull bitmap fixes from Yury Norov:

- Fix for bitmap documentation

- Fix for kernel build under certain configurations

* tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux:
lib/bitmap: workaround const_eval test build failure
cpumask: eliminate kernel-doc warnings

Merge tag 'exfat-for-6.5-rc5' of git://git./linux/kernel/git/linkinjeon/exfat

Pull exfat fixes from Namjae Jeon:

- Fix page allocation failure from allocation bitmap by using
   kvmalloc_array/kvfree

- Add the check to validate if filename entries exceeds max filename
   length

- Fix potential deadlock condition from dir_emit*()

* tag 'exfat-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: release s_lock before calling dir_emit()
  exfat: check if filename entries exceeds max filename length
  exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pm80xx: Fix error return code in pm8001_pci_probe()
  scsi: zfcp: Defer fc_rport blocking until after ADISC response
  scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices

word-at-a-time: use the same return type for has_zero regardless of endianness

Compiling big-endian targets with Clang produces the diagnostic:

  fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
} while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants)));
          ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
  fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning

It appears that when has_zero was introduced, two definitions were
produced with different signatures (in particular different return
types).

Looking at the usage in hash_name() in fs/namei.c, I suspect that
has_zero() is meant to be invoked twice per while loop iteration; using
logical-or would not update `bdata` when `a` did not have zeros.  So I
think it's preferred to always return an unsigned long rather than a
bool than update the while loop in hash_name() to use a logical-or
rather than bitwise-or.

[ Also changed powerpc version to do the same  - Linus ]

Link: https://github.com/ClangBuiltLinux/linux/issues/1832
Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/
Fixes: 36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic")
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()

Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers
a backtrace caused by the following field-spanning warning:

memcpy: detected field-spanning write (size 120) of single field
"&params_le->channel_list[0]" at
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2)

The driver still works after this warning. The warning was introduced by the
new field-spanning write checks which were enabled recently.

Fix this by replacing the channel_list[1] declaration at the end of
the struct with a flexible array declaration.

Most users of struct brcmf_scan_params_le calculate the size to alloc
using the size of the non flex-array part of the struct + needed extra
space, so they do not care about sizeof(struct brcmf_scan_params_le).

brcmf_notify_escan_complete() however uses the struct on the stack,
expecting there to be room for at least 1 entry in the channel-list
to store the special -1 abort channel-id.

To make this work use an anonymous union with a padding member
added + the actual channel_list flexible array.

Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230729140500.27892-1-hdegoede@redhat.com

vxlan: Fix nexthop hash size

The nexthop code expects a 31 bit hash, such as what is returned by
fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash
returned by skb_get_hash() can lead to problems related to the fact that
'int hash' is a negative number when the MSB is set.

In the case of hash threshold nexthop groups, nexthop_select_path_hthr()
will disproportionately select the first nexthop group entry. In the case
of resilient nexthop groups, nexthop_select_path_res() may do an out of
bounds access in nh_buckets[], for example:
    hash = -912054133
    num_nh_buckets = 2
    bucket_index = 65535

which leads to the following panic:

BUG: unable to handle page fault for address: ffffc900025910c8
PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0
Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:ffff88810c36f260 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8
RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219
R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0
R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900
FS:  0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x1ee/0x5c0
? __pfx_is_prefetch.constprop.0+0x10/0x10
? __pfx_page_fault_oops+0x10/0x10
? search_bpf_extables+0xfe/0x1c0
? fixup_exception+0x3b/0x470
? exc_page_fault+0xf6/0x110
? asm_exc_page_fault+0x26/0x30
? nexthop_select_path+0x197/0xbf0
? nexthop_select_path+0x197/0xbf0
? lock_is_held_type+0xe7/0x140
vxlan_xmit+0x5b2/0x2340
? __lock_acquire+0x92b/0x3370
? __pfx_vxlan_xmit+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_register_lock_class+0x10/0x10
? skb_network_protocol+0xce/0x2d0
? dev_hard_start_xmit+0xca/0x350
? __pfx_vxlan_xmit+0x10/0x10
dev_hard_start_xmit+0xca/0x350
__dev_queue_xmit+0x513/0x1e20
? __pfx___dev_queue_xmit+0x10/0x10
? __pfx_lock_release+0x10/0x10
? mark_held_locks+0x44/0x90
? skb_push+0x4c/0x80
? eth_header+0x81/0xe0
? __pfx_eth_header+0x10/0x10
? neigh_resolve_output+0x215/0x310
? ip6_finish_output2+0x2ba/0xc90
ip6_finish_output2+0x2ba/0xc90
? lock_release+0x236/0x3e0
? ip6_mtu+0xbb/0x240
? __pfx_ip6_finish_output2+0x10/0x10
? find_held_lock+0x83/0xa0
? lock_is_held_type+0xe7/0x140
ip6_finish_output+0x1ee/0x780
ip6_output+0x138/0x460
? __pfx_ip6_output+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_ip6_finish_output+0x10/0x10
NF_HOOK.constprop.0+0xc0/0x420
? __pfx_NF_HOOK.constprop.0+0x10/0x10
? ndisc_send_skb+0x2c0/0x960
? __pfx_lock_release+0x10/0x10
? __local_bh_enable_ip+0x93/0x110
? lock_is_held_type+0xe7/0x140
ndisc_send_skb+0x4be/0x960
? __pfx_ndisc_send_skb+0x10/0x10
? mark_held_locks+0x65/0x90
? find_held_lock+0x83/0xa0
ndisc_send_ns+0xb0/0x110
? __pfx_ndisc_send_ns+0x10/0x10
addrconf_dad_work+0x631/0x8e0
? lock_acquire+0x180/0x3f0
? __pfx_addrconf_dad_work+0x10/0x10
? mark_held_locks+0x24/0x90
process_one_work+0x582/0x9c0
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? mark_held_locks+0x24/0x90
worker_thread+0x93/0x630
? __kthread_parkme+0xdc/0x100
? __pfx_worker_thread+0x10/0x10
kthread+0x1a5/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
RIP: 0000:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Modules linked in:
CR2: ffffc900025910c8
---[ end trace 0000000000000000 ]---
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:ffff88810c36f260 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8
RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219
R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0
R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900
FS:  0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000129d00000 CR4: 0000000000750ee0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fix this problem by ensuring the MSB of hash is 0 using a right shift - the
same approach used in fib_multipath_hash() and rt6_multipath_hash().

Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6mr: Fix skb_under_panic in ip6mr_cache_report()

skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4
head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:192!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x152/0x1d0
Call Trace:
  <TASK>
  skb_push+0xc4/0xe0
  ip6mr_cache_report+0xd69/0x19b0
  reg_vif_xmit+0x406/0x690
  dev_hard_start_xmit+0x17e/0x6e0
  __dev_queue_xmit+0x2d6a/0x3d20
  vlan_dev_hard_start_xmit+0x3ab/0x5c0
  dev_hard_start_xmit+0x17e/0x6e0
  __dev_queue_xmit+0x2d6a/0x3d20
  neigh_connected_output+0x3ed/0x570
  ip6_finish_output2+0x5b5/0x1950
  ip6_finish_output+0x693/0x11c0
  ip6_output+0x24b/0x880
  NF_HOOK.constprop.0+0xfd/0x530
  ndisc_send_skb+0x9db/0x1400
  ndisc_send_rs+0x12a/0x6c0
  addrconf_dad_completed+0x3c9/0xea0
  addrconf_dad_work+0x849/0x1420
  process_one_work+0xa22/0x16e0
  worker_thread+0x679/0x10c0
  ret_from_fork+0x28/0x60
  ret_from_fork_asm+0x11/0x20

When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit().
reg_vif_xmit()
    ip6mr_cache_report()
        skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4
And skb_push declared as:
void *skb_push(struct sk_buff *skb, unsigned int len);
skb->data -= len;
//0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850
skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.

Fixes: 14fb64e1f449 ("[IPV6] MROUTE: Support PIM-SM (SSM).")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: Don't call dev_close/dev_open (DOWN/UP)

dev_close() and dev_open() are issued to change the interface state to DOWN
or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its
Ipv6 addresses and routes. We don't want this in cases of device recovery
(triggered by hardware or software) or when the qeth device is set
offline.

Setting a qeth device offline or online and device recovery actions call
netif_device_detach() and/or netif_device_attach(). That will reset or
set the LOWER_UP indication i.e. change the dev->state Bit
__LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and
still preserves the interface settings that are handled by the network
stack.

Don't call dev_open() nor dev_close() from the qeth device driver. Let the
network stack handle this.

Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tun-tap-uid'

Laszlo Ersek says:

====================
tun/tap: set sk_uid from current_fsuid()

The original patches fixing CVE-2023-1076 are incorrect in my opinion.
This small series fixes them up; see the individual commit messages for
explanation.

I have a very elaborate test procedure demonstrating the problem for
both tun and tap; it involves libvirt, qemu, and "crash". I can share
that procedure if necessary, but it's indeed quite long (I wrote it
originally for our QE team).

The patches in this series are supposed to "re-fix" CVE-2023-1076; given
that said CVE is classified as Low Impact (CVSSv3=5.5), I'm posting this
publicly, and not suggesting any embargo. Red Hat Product Security may
assign a new CVE number later.

I've tested the patches on top of v6.5-rc4, with "crash" built at commit
c74f375e0ef7.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: tap_open(): set sk_uid from current_fsuid()

Commit 66b2c338adce initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/tapX" device node's owner UID. Per original
commit 86741ec25462 ("net: core: Add a UID field to struct sock.",
2016-11-04), that's wrong: the idea is to cache the UID of the userspace
process that creates the socket. Commit 86741ec25462 mentions socket() and
accept(); with "tap", the action that creates the socket is
open("/dev/tapX").

Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/tapX" will be owned by root, so in practice, commit 66b2c338adce has
no observable effect:

- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),

- after, "sk_uid" would be zero, due to "/dev/tapX" being owned by root.

What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".

Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 66b2c338adce ("tap: tap_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: tun_chr_open(): set sk_uid from current_fsuid()

Commit a096ccca6e50 initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/net/tun" device node's owner UID. Per
original commit 86741ec25462 ("net: core: Add a UID field to struct
sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the
userspace process that creates the socket. Commit 86741ec25462 mentions
socket() and accept(); with "tun", the action that creates the socket is
open("/dev/net/tun").

Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/net/tun" will be owned by root, so in practice, commit a096ccca6e50
has no observable effect:

- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),

- after, "sk_uid" would be zero, due to "/dev/net/tun" being owned by root.

What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".

Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dcb: choose correct policy to parse DCB_ATTR_BCN

The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN],
which is introduced in commit 859ee3c43812 ("DCB: Add support for DCB
BCN"). Please see the comment in below code

static int dcbnl_bcn_setcfg(...)
{
  ...
  ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. )
  // !!! dcbnl_pfc_up_nest for attributes
  //  DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs
  ...
  for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) {
  // !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs
    ...
    value_byte = nla_get_u8(data[i]);
    ...
  }
  ...
  for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) {
  // !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs
  ...
    value_int = nla_get_u32(data[i]);
  ...
  }
  ...
}

That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nest
attributes to parse nlattr defined in dcbnl_pfc_up_attrs. But the
following access code fetch each nlattr as dcbnl_bcn_attrs attributes.
By looking up the associated nla_policy for dcbnl_bcn_attrs. We can find
the beginning part of these two policies are "same".

static const struct nla_policy dcbnl_pfc_up_nest[...] = {
        [DCB_PFC_UP_ATTR_0]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_1]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_2]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_3]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_4]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_5]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_6]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_7]   = {.type = NLA_U8},
        [DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG},
};

static const struct nla_policy dcbnl_bcn_nest[...] = {
        [DCB_BCN_ATTR_RP_0]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_1]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_2]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_3]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_4]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_5]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_6]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_7]         = {.type = NLA_U8},
        [DCB_BCN_ATTR_RP_ALL]       = {.type = NLA_FLAG},
        // from here is somewhat different
        [DCB_BCN_ATTR_BCNA_0]       = {.type = NLA_U32},
        ...
        [DCB_BCN_ATTR_ALL]          = {.type = NLA_FLAG},
};

Therefore, the current code is buggy and this
nla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and use
the adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0.

Hence use the correct policy dcbnl_bcn_nest to parse the nested
tb[DCB_ATTR_BCN] TLV.

Fixes: 859ee3c43812 ("DCB: Add support for DCB BCN")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801013248.87240-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'bnxt_en-2-xdp-bug-fixes'

Michael Chan says:

====================
bnxt_en: 2 XDP bug fixes

The first patch fixes XDP page pool logic on systems with page size >=
64K. The second patch fixes the max_mtu setting when an XDP program
supporting multi buffers is attached.
====================

Link: https://lore.kernel.org/r/20230731142043.58855-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_en: Fix max_mtu setting for multi-buf XDP

The existing code does not allow the MTU to be set to the maximum even
after an XDP program supporting multiple buffers is attached. Fix it
to set the netdev->max_mtu to the maximum value if the attached XDP
program supports mutiple buffers, regardless of the current MTU value.

Also use a local variable dev instead of repeatedly using bp->dev.

Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230731142043.58855-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_en: Fix page pool logic for page size >= 64K

The RXBD length field on all bnxt chips is 16-bit and so we cannot
support a full page when the native page size is 64K or greater.
The non-XDP (non page pool) code path has logic to handle this but
the XDP page pool code path does not handle this. Add the missing
logic to use page_pool_dev_alloc_frag() to allocate 32K chunks if
the page size is 64K or greater.

Fixes: 9f4b28301ce6 ("bnxt: XDP multibuffer enablement")
Link: https://lore.kernel.org/netdev/20230728231829.235716-2-michael.chan@broadcom.com/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230731142043.58855-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftest: net: Assert on a proper value in so_incoming_cpu.c.

Dan Carpenter reported an error spotted by Smatch.

./tools/testing/selftests/net/so_incoming_cpu.c:163 create_clients()
error: uninitialized symbol 'ret'.

The returned value of sched_setaffinity() should be checked with
ASSERT_EQ(), but the value was not saved in a proper variable,
resulting in an error above.

Let's save the returned value of with sched_setaffinity().

Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-kselftest/fe376760-33b6-4fc9-88e8-178e809af1ac@moroto.mountain/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230731181553.5392-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: netsec: Ignore 'phy-mode' on SynQuacer in DT mode

As documented in acd7aaf51b20 ("netsec: ignore 'phy-mode' device
property on ACPI systems") the SocioNext SynQuacer platform ships with
firmware defining the PHY mode as RGMII even though the physical
configuration of the PHY is for TX and RX delays.  Since bbc4d71d63549bc
("net: phy: realtek: fix rtl8211e rx/tx delay config") this has caused
misconfiguration of the PHY, rendering the network unusable.

This was worked around for ACPI by ignoring the phy-mode property but
the system is also used with DT.  For DT instead if we're running on a
SynQuacer force a working PHY mode, as well as the standard EDK2
firmware with DT there are also some of these systems that use u-boot
and might not initialise the PHY if not netbooting.  Newer firmware
imagaes for at least EDK2 are available from Linaro so print a warning
when doing this.

Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731-synquacer-net-v3-1-944be5f06428@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: korina: handle clk prepare error in korina_probe()

in korina_probe(), the return value of clk_prepare_enable()
should be checked since it might fail. we can use
devm_clk_get_optional_enabled() instead of devm_clk_get_optional()
and clk_prepare_enable() to automatically handle the error.

Fixes: e4cd854ec487 ("net: korina: Get mdio input clock via common clock framework")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230731090535.21416-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

USB: zaurus: Add ID for A-300/B-500/C-700

The SL-A300, B500/5600, and C700 devices no longer auto-load because of
"usbnet: Remove over-broad module alias from zaurus."
This patch adds IDs for those 3 devices.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217632
Fixes: 16adf5d07987 ("usbnet: Remove over-broad module alias from zaurus.")
Signed-off-by: Ross Maynard <bids.7405@bigpond.com>
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/69b5423b-2013-9fc9-9569-58e707d9bafb@bigpond.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ll_temac: fix error checking of irq_of_parse_and_map()

Most kernel functions return negative error codes but some irq functions
return zero on error. In this code irq_of_parse_and_map(), returns zero
and platform_get_irq() returns negative error codes. We need to handle
both cases appropriately.

Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/3d0aef75-06e0-45a5-a2a6-2cc4738d4143@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/ptrace: add missing linux/const.h include

Adrian Reber reported the following CRIU build bug after
commit b8af5999779d ("s390/ptrace: make all psw related
defines also available for asm"):

compel/arch/s390/src/lib/infect.c: In function 'arch_can_dump_task':
compel/arch/s390/src/lib/infect.c:523:25: error: 'UL' undeclared (first use in this function)
523 | if (psw->mask & PSW_MASK_RI) {
| ^~~~~~~~~~~

Add the missing linux/const.h include to fix this.

Reported-by: Adrian Reber <areber@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2225745
Link: https://github.com/checkpoint-restore/criu/pull/2232
Tested-by: Adrian Reber <areber@redhat.com>
Fixes: b8af5999779d ("s390/ptrace: make all psw related defines also available for asm")
Link: https://lore.kernel.org/r/20230731183926.330932-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

wifi: ray_cs: Replace 1-element array with flexible array

The trailing array member of struct tx_buf was defined as a 1-element
array, but used as a flexible array. This was resulting in build warnings:

    In function 'fortify_memset_chk',
        inlined from 'memset_io' at /kisskb/src/arch/mips/include/asm/io.h:486:2,
        inlined from 'build_auth_frame' at /kisskb/src/drivers/net/wireless/legacy/ray_cs.c:2697:2:
    /kisskb/src/include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning:
detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
      493 |                         __write_overflow_field(p_size_field, size);
          |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Replace it with an actual flexible array. Binary difference comparison
shows a single change in output:

│  drivers/net/wireless/legacy/ray_cs.c:883
│       lea    0x1c(%rbp),%r13d
│ -     cmp    $0x7c3,%r13d
│ +     cmp    $0x7c4,%r13d

This is from:

        if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) {

specifically:

#define TX_BUF_SIZE (2048 - sizeof(struct tx_msg))

This appears to have been originally buggy, so the change is correct.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/88f83d73-781d-bdc-126-aa629cb368c@linux-m68k.org
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230728231245.never.309-kees@kernel.org

erofs: drop unnecessary WARN_ON() in erofs_kill_sb()

Previously, .kill_sb() will be called only after fill_super fails.
It will be changed [1].

Besides, checking for s_magic in erofs_kill_sb() is unnecessary from
any point of view. Let's get rid of it now.

[1] https://lore.kernel.org/r/20230731-flugbereit-wohnlage-78acdf95ab7e@brauner

Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230801014737.28614-1-hsiangkao@linux.alibaba.com

erofs: fix wrong primary bvec selection on deduplicated extents

When handling deduplicated compressed data, there can be multiple
decompressed extents pointing to the same compressed data in one shot.

In such cases, the bvecs which belong to the longest extent will be
selected as the primary bvecs for real decompressors to decode and the
other duplicated bvecs will be directly copied from the primary bvecs.

Previously, only relative offsets of the longest extent were checked to
decompress the primary bvecs.  On rare occasions, it can be incorrect
if there are several extents with the same start relative offset.
As a result, some short bvecs could be selected for decompression and
then cause data corruption.

For example, as Shijie Sun reported off-list, considering the following
extents of a file:
117:   903345..  915250 |   11905 :     385024..    389120 |    4096
...
119:   919729..  930323 |   10594 :     385024..    389120 |    4096
...
124:   968881..  980786 |   11905 :     385024..    389120 |    4096

The start relative offset is the same: 2225, but extent 119 (919729..
930323) is shorter than the others.

Let's restrict the bvec length in addition to the start offset if bvecs
are not full.

Reported-by: Shijie Sun <sunshijie@xiaomi.com>
Fixes: 5c2a64252c5d ("erofs: introduce partial-referenced pclusters")
Tested-by Shijie Sun <sunshijie@xiaomi.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230719065459.60083-1-hsiangkao@linux.alibaba.com

bpf: sockmap: Remove preempt_disable in sock_map_sk_acquire

Disabling preemption in sock_map_sk_acquire conflicts with GFP_ATOMIC
allocation later in sk_psock_init_link on PREEMPT_RT kernels, since
GFP_ATOMIC might sleep on RT (see bpf: Make BPF and PREEMPT_RT co-exist
patchset notes for details).

This causes calling bpf_map_update_elem on BPF_MAP_TYPE_SOCKMAP maps to
BUG (sleeping function called from invalid context) on RT kernels.

preempt_disable was introduced together with lock_sk and rcu_read_lock
in commit 99ba2b5aba24e ("bpf: sockhash, disallow bpf_tcp_close and update
in parallel"), probably to match disabled migration of BPF programs, and
is no longer necessary.

Remove preempt_disable to fix BUG in sock_map_update_common on RT.

Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/all/20200224140131.461979697@linutronix.de/
Fixes: 99ba2b5aba24 ("bpf: sockhash, disallow bpf_tcp_close and update in parallel")
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230728064411.305576-1-tglozar@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'net-sched-bind-logic-fixes-for-cls_fw-cls_u32-and-cls_route'

valis says:

====================
net/sched Bind logic fixes for cls_fw, cls_u32 and cls_route

Three classifiers (cls_fw, cls_u32 and cls_route) always copy
tcf_result struct into the new instance of the filter on update.

This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.

This patch set fixes this issue in all affected classifiers by no longer
copying the tcf_result struct from the old filter.
====================

Link: https://lore.kernel.org/r/20230729123202.72406-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: cls_route: No longer copy tcf_result on update to avoid use-after-free

When route4_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.

This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.

Fix this by no longer copying the tcf_result struct from the old filter.

Fixes: 1109c00547fc ("net: sched: RCU cls_route")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: cls_fw: No longer copy tcf_result on update to avoid use-after-free

When fw_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.

This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.

Fix this by no longer copying the tcf_result struct from the old filter.

Fixes: e35a8ee5993b ("net: sched: fw use RCU")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: cls_u32: No longer copy tcf_result on update to avoid use-after-free

When u32_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.

This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.

Fix this by no longer copying the tcf_result struct from the old filter.

Fixes: de5df63228fc ("net: sched: cls_u32 changes to knode must appear atomic to readers")
Reported-by: valis <sec@valis.email>
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'Two fixes for cpu-map'

Hou Tao says:

====================

The patchset fixes two reported warning in cpu-map when running
xdp_redirect_cpu and some RT threads concurrently. Patch #1 fixes
the warning in __cpu_map_ring_cleanup() when kthread is stopped
prematurely. Patch #2 fixes the warning in __xdp_return() when
there are pending skbs in ptr_ring.

Please see individual patches for more details. And comments are always
welcome.

====================

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

bpf, cpumap: Handle skb as well when clean up ptr_ring

The following warning was reported when running xdp_redirect_cpu with
both skb-mode and stress-mode enabled:

  ------------[ cut here ]------------
  Incorrect XDP memory type (-2128176192) usage
  WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405
  Modules linked in:
  CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G  6.5.0-rc2+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  Workqueue: events __cpu_map_entry_free
  RIP: 0010:__xdp_return+0x1e4/0x4a0
  ......
  Call Trace:
   <TASK>
   ? show_regs+0x65/0x70
   ? __warn+0xa5/0x240
   ? __xdp_return+0x1e4/0x4a0
   ......
   xdp_return_frame+0x4d/0x150
   __cpu_map_entry_free+0xf9/0x230
   process_one_work+0x6b0/0xb80
   worker_thread+0x96/0x720
   kthread+0x1a5/0x1f0
   ret_from_fork+0x3a/0x70
   ret_from_fork_asm+0x1b/0x30
   </TASK>

The reason for the warning is twofold. One is due to the kthread
cpu_map_kthread_run() is stopped prematurely. Another one is
__cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs in
ptr_ring as XDP frames.

Prematurely-stopped kthread will be fixed by the preceding patch and
ptr_ring will be empty when __cpu_map_ring_cleanup() is called. But
as the comments in __cpu_map_ring_cleanup() said, handling and freeing
skbs in ptr_ring as well to "catch any broken behaviour gracefully".

Fixes: 11941f8a8536 ("bpf: cpumap: Implement generic cpumap")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

bpf, cpumap: Make sure kthread is running before map update returns

The following warning was reported when running stress-mode enabled
xdp_redirect_cpu with some RT threads:

  ------------[ cut here ]------------
  WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135
  CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  Workqueue: events cpu_map_kthread_stop
  RIP: 0010:put_cpu_map_entry+0xda/0x220
  ......
  Call Trace:
   <TASK>
   ? show_regs+0x65/0x70
   ? __warn+0xa5/0x240
   ......
   ? put_cpu_map_entry+0xda/0x220
   cpu_map_kthread_stop+0x41/0x60
   process_one_work+0x6b0/0xb80
   worker_thread+0x96/0x720
   kthread+0x1a5/0x1f0
   ret_from_fork+0x3a/0x70
   ret_from_fork_asm+0x1b/0x30
   </TASK>

The root cause is the same as commit 436901649731 ("bpf: cpumap: Fix memory
leak in cpu_map_update_elem"). The kthread is stopped prematurely by
kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call
cpu_map_kthread_run() at all but XDP program has already queued some
frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks
the ptr_ring, it will find it was not emptied and report a warning.

An alternative fix is to use __cpu_map_ring_cleanup() to drop these
pending frames or skbs when kthread_stop() returns -EINTR, but it may
confuse the user, because these frames or skbs have been handled
correctly by XDP program. So instead of dropping these frames or skbs,
just make sure the per-cpu kthread is running before
__cpu_map_entry_alloc() returns.

After apply the fix, the error handle for kthread_stop() will be
unnecessary because it will always return 0, so just remove it.

Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

octeon_ep: initialize mbox mutexes

The two mbox-related mutexes are destroyed in octep_ctrl_mbox_uninit(),
but the corresponding mutex_init calls were missing.
A "DEBUG_LOCKS_WARN_ON(lock->magic != lock)" warning was emitted with
CONFIG_DEBUG_MUTEXES on.

Initialize the two mutexes in octep_ctrl_mbox_init().

Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230729151516.24153-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt: don't handle XDP in netpoll

Similarly to other recently fixed drivers make sure we don't
try to access XDP or page pool APIs when NAPI budget is 0.
NAPI budget of 0 may mean that we are in netpoll.

This may result in running software IRQs in hard IRQ context,
leading to deadlocks or crashes.

To make sure bnapi->tx_pkts don't get wiped without handling
the events, move clearing the field into the handler itself.
Remember to clear tx_pkts after reset (bnxt_enable_napi())
as it's technically possible that netpoll will accumulate
some tx_pkts and then a reset will happen, leaving tx_pkts
out of sync with reality.

Fixes: 322b87ca55f2 ("bnxt_en: add page_pool support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230728205020.2784844-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: Fix RDMA VSI removal during queue rebuild

During qdisc create/delete, it is necessary to rebuild the queue
of VSIs. An error occurred because the VSIs created by RDMA were
still active.

Added check if RDMA is active. If yes, it disallows qdisc changes
and writes a message in the system logs.

Fixes: 348048e724a0 ("ice: Implement iidc operations")
Signed-off-by: Rafal Rogalski <rafalx.rogalski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230728171243.2446101-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sfc: fix field-spanning memcpy in selftest

Add a struct_group for the whole packet body so we can copy it in one
go without triggering FORTIFY_SOURCE complaints.

Fixes: cf60ed469629 ("sfc: use padding to fix alignment in loopback test")
Fixes: 30c24dd87f3f ("sfc: siena: use padding to fix alignment in loopback test")
Fixes: 1186c6b31ee1 ("sfc: falcon: use padding to fix alignment in loopback test")
Reviewed-by: Andy Moreton <andy.moreton@amd.com>
Tested-by: Andy Moreton <andy.moreton@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230728165528.59070-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: qmi_wwan: add Quectel EM05GV2

Add support for Quectel EM05GV2 (G=global) with vendor ID
0x2c7c and product ID 0x030e

Enabling DTR on this modem was necessary to ensure stable operation.
Patch for usb: serial: option: is also in progress.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030e Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Martin Kohn <m.kohn@welotec.com>
Link: https://lore.kernel.org/r/AM0PR04MB57648219DE893EE04FA6CC759701A@AM0PR04MB5764.eurprd04.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: lan78xx: reorder cleanup operations to avoid UAF bugs

The timer dev->stat_monitor can schedule the delayed work dev->wq and
the delayed work dev->wq can also arm the dev->stat_monitor timer.

When the device is detaching, the net_device will be deallocated. but
the net_device private data could still be dereferenced in delayed work
or timer handler. As a result, the UAF bugs will happen.

One racy situation is shown below:

      (Thread 1)                 |      (Thread 2)
lan78xx_stat_monitor()           |
...                             |  lan78xx_disconnect()
lan78xx_defer_kevent()          |    ...
  ...                            |    cancel_delayed_work_sync(&dev->wq);
  schedule_delayed_work()        |    ...
  (wait some time)               |    free_netdev(net); //free net_device
  lan78xx_delayedwork()          |
  //use net_device private data  |
  dev-> //use                    |

Although we use cancel_delayed_work_sync() to cancel the delayed work
in lan78xx_disconnect(), it could still be scheduled in timer handler
lan78xx_stat_monitor().

Another racy situation is shown below:

      (Thread 1)                |      (Thread 2)
lan78xx_delayedwork             |
mod_timer()                    |  lan78xx_disconnect()
                                |   cancel_delayed_work_sync()
(wait some time)               |   if (timer_pending(&dev->stat_monitor))
                              |       del_timer_sync(&dev->stat_monitor);
lan78xx_stat_monitor()         |   ...
  lan78xx_defer_kevent()        |   free_netdev(net); //free
   //use net_device private data|
   dev-> //use                  |

Although we use del_timer_sync() to delete the timer, the function
timer_pending() returns 0 when the timer is activated. As a result,
the del_timer_sync() will not be executed and the timer could be
re-armed.

In order to mitigate this bug, We use timer_shutdown_sync() to shutdown
the timer and then use cancel_delayed_work_sync() to cancel the delayed
work. As a result, the net_device could be deallocated safely.

What's more, the dev->flags is set to EVENT_DEV_DISCONNECT in
lan78xx_disconnect(). But it could still be set to EVENT_STAT_UPDATE
in lan78xx_stat_monitor(). So this patch put the set_bit() behind
timer_shutdown_sync().

Fixes: 77dfff5bb7e2 ("lan78xx: Fix race condition in disconnect handling")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: mediatek,net: fixup MAC binding

1. Use unevaluatedProperties
It's needed to allow ethernet-controller.yaml properties work correctly.

2. Drop unneeded phy-handle/phy-mode

3. Don't require phy-handle
Some SoCs may use fixed link.

For in-kernel MT7621 DTS files this fixes following errors:
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'phy-handle' is a required property
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'phy-handle' is a required property
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX.

syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.

We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().

The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.

syzkaller fed this input and 0x100000000 is cast to s32 to be 0.

  @TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}

We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.

While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.

Also, we add a new tdc test case for this issue.

[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in:

Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Co-developed-by: Eric Dumazet <edumazet@google.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfsd: Fix reading via splice

nfsd_splice_actor() has a clause in its loop that chops up a compound page
into individual pages such that if the same page is seen twice in a row, it
is discarded the second time.  This is a problem with the advent of
shmem_splice_read() as that inserts zero_pages into the pipe in lieu of
pages that aren't present in the pagecache.

Fix this by assuming that the last page is being extended only if the
currently stored length + starting offset is not currently on a page
boundary.

This can be tested by NFS-exporting a tmpfs filesystem on the test machine
and truncating it to more than a page in size (eg. truncate -s 8192) and
then reading it by NFS.  The first page will be all zeros, but thereafter
garbage will be read.

Note: I wonder if we can ever get a situation now where we get a splice
that gives us contiguous parts of a page in separate actor calls.  As NFSD
can only be splicing from a file (I think), there are only three sources of
the page: copy_splice_read(), shmem_splice_read() and file_splice_read().
The first allocates pages for the data it reads, so the problem cannot
occur; the second should never see a partial page; and the third waits for
each page to become available before we're allowed to read from it.

Fixes: bd194b187115 ("shmem: Implement splice-read")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
cc: Hugh Dickins <hughd@google.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Linux 6.5-rc4

Merge tag 'spi-fix-v6.5-rc3' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"A bunch of fixes for the Qualcomm QSPI driver, fixing multiple issues
  with the newly added DMA mode - it had a number of issues exposed when
  tested in a wider range of use cases, both race condition style issues
  and issues with different inputs to those that had been used in test"

* tag 'spi-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized reads
  spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes
  spi: spi-qcom-qspi: Add DMA_CHAIN_DONE to ALL_IRQS
  spi: spi-qcom-qspi: Call dma_wmb() after setting up descriptors
  spi: spi-qcom-qspi: Use GFP_ATOMIC flag while allocating for descriptor
  spi: spi-qcom-qspi: Ignore disabled interrupts' status in isr

Merge tag 'regulator-fix-v6.5-rc3' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"A couple of small fixes for the the mt6358 driver, fixing error
  reporting and a bootstrapping issue"

* tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: mt6358: Fix incorrect VCN33 sync error message
  regulator: mt6358: Sync VCN33_* enable status after checking ID

Merge tag 'usb-6.5-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are a set of USB driver fixes for 6.5-rc4. Include in here are:

   - new USB serial device ids

   - dwc3 driver fixes for reported issues

   - typec driver fixes for reported problems

   - gadget driver fixes

   - reverts of some problematic USB changes that went into -rc1

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  usb: misc: ehset: fix wrong if condition
  usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
  usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
  usb: gadget: call usb_gadget_check_config() to verify UDC capability
  usb: typec: Use sysfs_emit_at when concatenating the string
  usb: typec: Iterate pds array when showing the pd list
  usb: typec: Set port->pd before adding device for typec_port
  usb: typec: qcom: fix return value check in qcom_pmic_typec_probe()
  Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"
  Revert "usb: xhci: tegra: Fix error check"
  USB: gadget: Fix the memory leak in raw_gadget driver
  usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate
  Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"
  Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
  USB: quirks: add quirk for Focusrite Scarlett
  usb: xhci-mtk: set the dma max_seg_size
  MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail
  usb: dwc3: don't reset device side if dwc3 was configured as host-only
  usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()
  usb: ohci-at91: Fix the unhandle interrupt when resume
  ...

Merge tag 'tty-6.5-rc4' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
"Here are some small TTY and serial driver fixes for 6.5-rc4 for some
  reported problems. Included in here is:

   - TIOCSTI fix for braille readers

   - documentation fix for minor numbers

   - MAINTAINERS update for new serial files in -rc1

   - minor serial driver fixes for reported problems

  All of these have been in linux-next with no reported problems"

* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_dw: Preserve original value of DLF register
  tty: serial: sh-sci: Fix sleeping in atomic context
  serial: sifive: Fix sifive_serial_console_setup() section
  Documentation: devices.txt: reconcile serial/ucc_uart minor numers
  MAINTAINERS: Update TTY layer for lists and recently added files
  tty: n_gsm: fix UAF in gsm_cleanup_mux
  TIOCSTI: always enable for CAP_SYS_ADMIN

Merge tag 'staging-6.5-rc4' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.5-rc4 that resolve
  some reported problems. These fixes are:

   - fix for an old bug in the r8712 driver

   - fbtft driver fix for a spi device

   - potential overflow fix in the ks7010 driver

  All of these have been in linux-next with no reported problems"

* tag 'staging-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()
  staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVER
  staging: r8712: Fix memory leak in _r8712_init_xmit_priv()

Merge tag 'char-misc-6.5-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char driver and Documentation fixes from Greg KH:
"Here is a char driver fix and some documentation updates for 6.5-rc4
  that contain the following changes:

   - sram/genalloc bugfix for reported problem

   - security-bugs.rst update based on recent discussions

   - embargoed-hardware-issues minor cleanups and then partial revert
     for the project/company lists

  All of these have been in linux-next for a while with no reported
  problems, and the documentation updates have all been reviewed by the
  relevant developers"

* tag 'char-misc-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc/genalloc: Name subpools by of_node_full_name()
  Documentation: embargoed-hardware-issues.rst: add AMD to the list
  Documentation: embargoed-hardware-issues.rst: clean out empty and unused entries
  Documentation: security-bugs.rst: clarify CVE handling
  Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group

Merge tag 'probes-fixes-v6.5-rc3' of git://git./linux/kernel/git/trace/linux-trace

Pull probe fixes from Masami Hiramatsu:

- probe-events: add NULL check for some BTF API calls which can return
   error code and NULL.

- ftrace selftests: check fprobe and kprobe event correctly. This fixes
   a miss condition of the test command.

- kprobes: do not allow probing functions that start with "__cfi_" or
   "__pfx_" since those are auto generated for kernel CFI and not
   executed.

* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobes: Prohibit probing on CFI preamble symbol
  selftests/ftrace: Fix to check fprobe event eneblement
  tracing/probes: Fix to add NULL check for BTF APIs

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"x86:

   - Do not register IRQ bypass consumer if posted interrupts not
     supported

   - Fix missed device interrupt due to non-atomic update of IRR

   - Use GFP_KERNEL_ACCOUNT for pid_table in ipiv

   - Make VMREAD error path play nice with noinstr

   - x86: Acquire SRCU read lock when handling fastpath MSR writes

   - Support linking rseq tests statically against glibc 2.35+

   - Fix reference count for stats file descriptors

   - Detect userspace setting invalid CR0

  Non-KVM:

   - Remove coccinelle script that has caused multiple confusion
     ("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
     usage", acked by Greg)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
  KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
  KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
  KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
  Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
  KVM: selftests: Verify stats fd is usable after VM fd has been closed
  KVM: selftests: Verify stats fd can be dup()'d and read
  KVM: selftests: Verify userspace can create "redundant" binary stats files
  KVM: selftests: Explicitly free vcpus array in binary stats test
  KVM: selftests: Clean up stats fd in common stats_test() helper
  KVM: selftests: Use pread() to read binary stats header
  KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
  selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
  Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
  KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
  KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
  KVM: VMX: Make VMREAD error path play nice with noinstr
  KVM: x86/irq: Conditionally register IRQ bypass consumer again
  KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
  KVM: x86: check the kvm_cpu_get_interrupt result before using it
  KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
  ...

Merge tag 'locking_urgent_for_v6.5_rc4' of git://git./linux/kernel/git/tip/tip

Pull locking fix from Borislav Petkov:

- Fix a rtmutex race condition resulting from sharing of the sort key
   between the lock waiters and the PI chain tree (->pi_waiters) of a
   task by giving each tree their own sort key

* tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix task->pi_waiters integrity

Merge tag 'x86_urgent_for_v6.5_rc4' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

- AMD's automatic IBRS doesn't enable cross-thread branch target
   injection protection (STIBP) for user processes. Enable STIBP on such
   systems.

- Do not delete (but put the ref instead) of AMD MCE error thresholding
   sysfs kobjects when destroying them in order not to delete the kernfs
   pointer prematurely

- Restore annotation in ret_from_fork_asm() in order to fix kthread
   stack unwinding from being marked as unreliable and thus breaking
   livepatching

* tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
  x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks
  x86: Fix kthread unwind

Merge tag 'irq_urgent_for_v6.5_rc4' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Borislav Petkov:

- Work around an erratum on GIC700, where a race between a CPU handling
   a wake-up interrupt, a change of affinity, and another CPU going to
   sleep can result in a lack of wake-up event on the next interrupt

- Fix the locking required on a VPE for GICv4

- Enable Rockchip 3588001 erratum workaround for RK3588S

- Fix the irq-bcm6345-l1 assumtions of the boot CPU always be the first
   CPU in the system

* tag 'irq_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
  irqchip/gic-v3: Enable Rockchip 3588001 erratum workaround for RK3588S
  irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation
  irq-bcm6345-l1: Do not assume a fixed block to cpu mapping

Merge tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
"Four small SMB3 client fixes:

   - two reconnect fixes (to address the case where non-default
     iocharset gets incorrectly overridden at reconnect with the
     default charset)

   - fix for NTLMSSP_AUTH request setting a flag incorrectly)

   - Add missing check for invalid tlink (tree connection) in ioctl"

* tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add missing return value check for cifs_sb_tlink
  smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request
  cifs: fix charset issue in reconnection
  fs/nls: make load_nls() take a const parameter

Merge tag 'trace-v6.5-rc3' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fix to /sys/kernel/tracing/per_cpu/cpu*/stats read and entries.

   If a resize shrinks the buffer it clears the read count to notify
   readers that they need to reset. But the read count is also used for
   accounting and this causes the numbers to be off. Instead, create a
   separate variable to use to notify readers to reset.

- Fix the ref counts of the "soft disable" mode. The wrong value was
   used for testing if soft disable mode should be enabled or disable,
   but instead, just change the logic to do the enable and disable in
   place when the SOFT_MODE is set or cleared.

- Several kernel-doc fixes

- Removal of unused external declarations

* tag 'trace-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix warning in trace_buffered_event_disable()
  ftrace: Remove unused extern declarations
  tracing: Fix kernel-doc warnings in trace_seq.c
  tracing: Fix kernel-doc warnings in trace_events_trigger.c
  tracing/synthetic: Fix kernel-doc warnings in trace_events_synth.c
  ring-buffer: Fix kernel-doc warnings in ring_buffer.c
  ring-buffer: Fix wrong stat of cpu_buffer->read

arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS

Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.

Get rid of it mechanically:

   git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
       xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'

Also just remove the AUTOFS4_FS config option stub.  Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.

Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'net-data-races'

Eric Dumazet says:

====================
net: annotate data-races

This series was inspired by a syzbot/KCSAN report.

This will later also permit some optimizations,
like not having to lock the socket while reading/writing
some of its fields.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>