Johannes Berg [Thu, 4 May 2023 13:45:01 +0000 (16:45 +0300)]
wifi: mac80211: fix min center freq offset tracing
[ Upstream commit
248e4776514bf70236e6b1a54c65aa5324c8b1eb ]
We need to set the correct trace variable, otherwise we're
overwriting something else instead and the right one that
we print later is not initialized.
Fixes:
b6011960f392 ("mac80211: handle channel frequency offset")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mirsad Goran Todorovac [Tue, 25 Apr 2023 16:40:08 +0000 (18:40 +0200)]
wifi: mac80211: fortify the spinlock against deadlock by interrupt
[ Upstream commit
ef6e1997da63ad0ac3fe33153fec9524c9ae56c9 ]
In the function ieee80211_tx_dequeue() there is a particular locking
sequence:
begin:
spin_lock(&local->queue_stop_reason_lock);
q_stopped = local->queue_stop_reasons[q];
spin_unlock(&local->queue_stop_reason_lock);
However small the chance (increased by ftracetest), an asynchronous
interrupt can occur in between of spin_lock() and spin_unlock(),
and the interrupt routine will attempt to lock the same
&local->queue_stop_reason_lock again.
This will cause a costly reset of the CPU and the wifi device or an
altogether hang in the single CPU and single core scenario.
The only remaining spin_lock(&local->queue_stop_reason_lock) that
did not disable interrupts was patched, which should prevent any
deadlocks on the same CPU/core and the same wifi device.
This is the probable trace of the deadlock:
kernel: ================================
kernel: WARNING: inconsistent lock state
kernel: 6.3.0-rc6-mt-
20230401-00001-gf86822a1170f #4 Tainted: G W
kernel: --------------------------------
kernel: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kernel: kworker/5:0/25656 [HC0[0]:SC0[0]:HE1:SE1] takes:
kernel:
ffff9d6190779478 (&local->queue_stop_reason_lock){+.?.}-{2:2}, at: return_to_handler+0x0/0x40
kernel: {IN-SOFTIRQ-W} state was registered at:
kernel: lock_acquire+0xc7/0x2d0
kernel: _raw_spin_lock+0x36/0x50
kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211]
kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm]
kernel: iwl_mvm_mac_wake_tx_queue+0x2d/0xd0 [iwlmvm]
kernel: ieee80211_queue_skb+0x450/0x730 [mac80211]
kernel: __ieee80211_xmit_fast.constprop.66+0x834/0xa50 [mac80211]
kernel: __ieee80211_subif_start_xmit+0x217/0x530 [mac80211]
kernel: ieee80211_subif_start_xmit+0x60/0x580 [mac80211]
kernel: dev_hard_start_xmit+0xb5/0x260
kernel: __dev_queue_xmit+0xdbe/0x1200
kernel: neigh_resolve_output+0x166/0x260
kernel: ip_finish_output2+0x216/0xb80
kernel: __ip_finish_output+0x2a4/0x4d0
kernel: ip_finish_output+0x2d/0xd0
kernel: ip_output+0x82/0x2b0
kernel: ip_local_out+0xec/0x110
kernel: igmpv3_sendpack+0x5c/0x90
kernel: igmp_ifc_timer_expire+0x26e/0x4e0
kernel: call_timer_fn+0xa5/0x230
kernel: run_timer_softirq+0x27f/0x550
kernel: __do_softirq+0xb4/0x3a4
kernel: irq_exit_rcu+0x9b/0xc0
kernel: sysvec_apic_timer_interrupt+0x80/0xa0
kernel: asm_sysvec_apic_timer_interrupt+0x1f/0x30
kernel: _raw_spin_unlock_irqrestore+0x3f/0x70
kernel: free_to_partial_list+0x3d6/0x590
kernel: __slab_free+0x1b7/0x310
kernel: kmem_cache_free+0x52d/0x550
kernel: putname+0x5d/0x70
kernel: do_sys_openat2+0x1d7/0x310
kernel: do_sys_open+0x51/0x80
kernel: __x64_sys_openat+0x24/0x30
kernel: do_syscall_64+0x5c/0x90
kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc
kernel: irq event stamp: 5120729
kernel: hardirqs last enabled at (5120729): [<
ffffffff9d149936>] trace_graph_return+0xd6/0x120
kernel: hardirqs last disabled at (5120728): [<
ffffffff9d149950>] trace_graph_return+0xf0/0x120
kernel: softirqs last enabled at (5069900): [<
ffffffff9cf65b60>] return_to_handler+0x0/0x40
kernel: softirqs last disabled at (5067555): [<
ffffffff9cf65b60>] return_to_handler+0x0/0x40
kernel:
other info that might help us debug this:
kernel: Possible unsafe locking scenario:
kernel: CPU0
kernel: ----
kernel: lock(&local->queue_stop_reason_lock);
kernel: <Interrupt>
kernel: lock(&local->queue_stop_reason_lock);
kernel:
*** DEADLOCK ***
kernel: 8 locks held by kworker/5:0/25656:
kernel: #0:
ffff9d618009d138 ((wq_completion)events_freezable){+.+.}-{0:0}, at: process_one_work+0x1ca/0x530
kernel: #1:
ffffb1ef4637fe68 ((work_completion)(&local->restart_work)){+.+.}-{0:0}, at: process_one_work+0x1ce/0x530
kernel: #2:
ffffffff9f166548 (rtnl_mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel: #3:
ffff9d6190778728 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel: #4:
ffff9d619077b480 (&mvm->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel: #5:
ffff9d61907bacd8 (&trans_pcie->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel: #6:
ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_queue_state_change+0x59/0x3a0 [iwlmvm]
kernel: #7:
ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm]
kernel:
stack backtrace:
kernel: CPU: 5 PID: 25656 Comm: kworker/5:0 Tainted: G W 6.3.0-rc6-mt-
20230401-00001-gf86822a1170f #4
kernel: Hardware name: LENOVO 82H8/LNVNB161216, BIOS GGCN51WW 11/16/2022
kernel: Workqueue: events_freezable ieee80211_restart_work [mac80211]
kernel: Call Trace:
kernel: <TASK>
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: dump_stack_lvl+0x5f/0xa0
kernel: dump_stack+0x14/0x20
kernel: print_usage_bug.part.46+0x208/0x2a0
kernel: mark_lock.part.47+0x605/0x630
kernel: ? sched_clock+0xd/0x20
kernel: ? trace_clock_local+0x14/0x30
kernel: ? __rb_reserve_next+0x5f/0x490
kernel: ? _raw_spin_lock+0x1b/0x50
kernel: __lock_acquire+0x464/0x1990
kernel: ? mark_held_locks+0x4e/0x80
kernel: lock_acquire+0xc7/0x2d0
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: ? ftrace_return_to_handler+0x8b/0x100
kernel: ? preempt_count_add+0x4/0x70
kernel: _raw_spin_lock+0x36/0x50
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211]
kernel: ? prepare_ftrace_return+0xc5/0x190
kernel: ? ftrace_graph_func+0x16/0x20
kernel: ? 0xffffffffc02ab0b1
kernel: ? lock_acquire+0xc7/0x2d0
kernel: ? iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm]
kernel: ? ieee80211_tx_dequeue+0x9/0x1330 [mac80211]
kernel: ? __rcu_read_lock+0x4/0x40
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_mvm_queue_state_change+0x311/0x3a0 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_mvm_wake_sw_queue+0x17/0x20 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_txq_gen2_unmap+0x1c9/0x1f0 [iwlwifi]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_txq_gen2_free+0x55/0x130 [iwlwifi]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_txq_gen2_tx_free+0x63/0x80 [iwlwifi]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: _iwl_trans_pcie_gen2_stop_device+0x3f3/0x5b0 [iwlwifi]
kernel: ? _iwl_trans_pcie_gen2_stop_device+0x9/0x5b0 [iwlwifi]
kernel: ? mutex_lock_nested+0x4/0x30
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_trans_pcie_gen2_stop_device+0x5f/0x90 [iwlwifi]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_mvm_stop_device+0x78/0xd0 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: __iwl_mvm_mac_start+0x114/0x210 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_mvm_mac_start+0x76/0x150 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: drv_start+0x79/0x180 [mac80211]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: ieee80211_reconfig+0x1523/0x1ce0 [mac80211]
kernel: ? synchronize_net+0x4/0x50
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: ieee80211_restart_work+0x108/0x170 [mac80211]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: process_one_work+0x250/0x530
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: worker_thread+0x48/0x3a0
kernel: ? __pfx_worker_thread+0x10/0x10
kernel: kthread+0x10f/0x140
kernel: ? __pfx_kthread+0x10/0x10
kernel: ret_from_fork+0x29/0x50
kernel: </TASK>
Fixes:
4444bc2116ae ("wifi: mac80211: Proper mark iTXQs for resumption")
Link: https://lore.kernel.org/all/1f58a0d1-d2b9-d851-73c3-93fcc607501c@alu.unizg.hr/
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/all/cdc80531-f25f-6f9d-b15f-25e16130b53a@alu.unizg.hr/
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: tag, or it goes automatically?
Link: https://lore.kernel.org/r/20230425164005.25272-1-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilan Peer [Mon, 24 Apr 2023 07:32:24 +0000 (10:32 +0300)]
wifi: cfg80211: Drop entries with invalid BSSIDs in RNR
[ Upstream commit
1b6b4ed01493b7ea2205ab83c49198f7d13ca9d2 ]
Ignore AP information for entries that include an invalid
BSSID in the TBTT information field, e.g., all zeros BSSIDs.
Fixes:
c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230424103224.5e65d04d1448.Ic10c8577ae4a85272c407106c9d0a2ecb5372743@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dawid Wesierski [Tue, 18 Apr 2023 09:52:55 +0000 (11:52 +0200)]
ice: Fix ice VF reset during iavf initialization
[ Upstream commit
7255355a0636b4eff08d5e8139c77d98f151c4fc ]
Fix the current implementation that causes ice_trigger_vf_reset()
to start resetting the VF even when the VF-NIC is still initializing.
When we reset NIC with ice driver it can interfere with
iavf-vf initialization e.g. during consecutive resets induced by ice
iavf ice
| |
|<-----------------|
| ice resets vf
iavf |
reset |
start |
|<-----------------|
| ice resets vf
| causing iavf
| initialization
| error
| |
iavf
reset
end
This leads to a series of -53 errors
(failed to init adminq) from the IAVF.
Change the state of the vf_state field to be not active when the IAVF
is still initializing. Make sure to wait until receiving the message on
the message box to ensure that the vf is ready and initializded.
In simple terms we use the ACTIVE flag to make sure that the ice
driver knows if the iavf is ready for another reset
iavf ice
| |
| |
|<------------- ice resets vf
iavf vf_state != ACTIVE
reset |
start |
| |
| |
iavf |
reset-------> vf_state == ACTIVE
end ice resets vf
| |
| |
Fixes:
c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration")
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacob Keller [Thu, 19 Jan 2023 01:16:51 +0000 (17:16 -0800)]
ice: introduce clear_reset_state operation
[ Upstream commit
fa4a15c85c849e92257da6dbffeb1e3a6399fd7b ]
When hardware is reset, the VF relies on the VFGEN_RSTAT register to detect
when the VF is finished resetting. This is a tri-state register where 0
indicates a reset is in progress, 1 indicates the hardware is done
resetting, and 2 indicates that the software is done resetting.
Currently the PF driver relies on the device hardware resetting VFGEN_RSTAT
when a global reset occurs. This works ok, but it does mean that the VF
might not immediately notice a reset when the driver first detects that the
global reset is occurring.
This is also problematic for Scalable IOV, because there is no read/write
equivalent VFGEN_RSTAT register for the Scalable VSI type. Instead, the
Scalable IOV VFs will need to emulate this register.
To support this, introduce a new VF operation, clear_reset_state, which is
called when the PF driver first detects a global reset. The Single Root IOV
implementation can just write to VFGEN_RSTAT to ensure it's cleared
immediately, without waiting for the actual hardware reset to begin. The
Scalable IOV implementation will use this as part of its tracking of the
reset status to allow properly reporting the emulated VFGEN_RSTAT to the VF
driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of:
7255355a0636 ("ice: Fix ice VF reset during iavf initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Mon, 15 May 2023 02:56:07 +0000 (19:56 -0700)]
net: bcmgenet: Restore phy_stop() depending upon suspend/close
[ Upstream commit
225c657945c4a6307741cb3cc89467eadcc26e9b ]
Removing the phy_stop() from bcmgenet_netif_stop() ended up causing
warnings from the PHY library that phy_start() is called from the
RUNNING state since we are no longer stopping the PHY state machine
during bcmgenet_suspend().
Restore the call to phy_stop() but make it conditional on being called
from the close or suspend path.
Fixes:
c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine")
Fixes:
93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Thu, 4 May 2023 23:07:27 +0000 (16:07 -0700)]
net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
[ Upstream commit
93e0401e0fc0c54b0ac05b687cd135c2ac38187c ]
The call to phy_stop() races with the later call to phy_disconnect(),
resulting in concurrent phy_suspend() calls being run from different
CPUs. The final call to phy_disconnect() ensures that the PHY is
stopped and suspended, too.
Fixes:
c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oliver Hartkopp [Sat, 6 May 2023 18:45:15 +0000 (20:45 +0200)]
can: dev: fix missing CAN XL support in can_put_echo_skb()
[ Upstream commit
6bffdc38f9935bae49f980448f3f6be2dada0564 ]
can_put_echo_skb() checks for the enabled IFF_ECHO flag and the
correct ETH_P type of the given skbuff. When implementing the CAN XL
support the new check for ETH_P_CANXL has been forgotten.
Fixes:
fb08cba12b52 ("can: canxl: update CAN infrastructure for CAN XL frames")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230506184515.39241-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vineeth Vijayan [Tue, 2 May 2023 09:12:42 +0000 (11:12 +0200)]
s390/cio: include subchannels without devices also for evaluation
[ Upstream commit
b1b0d5aec1cf9f9a900a14964f869c68688d923e ]
Currently when the new channel-path is enabled, we do evaluation only
on the subchannels with a device connected on it. This is because,
in the past, if the device in the subchannel is not working or not
available, we used to unregister the subchannels. But, from the 'commit
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")'
we allow subchannels with or without an active device connected
on it. So, when we do the io_subchannel_verify, make sure that,
we are evaluating the subchannels without any device too.
Fixes:
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xin Long [Sun, 14 May 2023 19:52:29 +0000 (15:52 -0400)]
tipc: check the bearer min mtu properly when setting it by netlink
[ Upstream commit
35a089b5d793d2bfd2cc7cfa6104545184de2ce7 ]
Checking the bearer min mtu with tipc_udp_mtu_bad() only works for
IPv4 UDP bearer, and IPv6 UDP bearer has a different value for the
min mtu. This patch checks with encap_hlen + TIPC_MIN_BEARER_MTU
for min mtu, which works for both IPv4 and IPv6 UDP bearer.
Note that tipc_udp_mtu_bad() is still used to check media min mtu
in __tipc_nl_media_set(), as m->mtu currently is only used by the
IPv4 UDP bearer as its default mtu value.
Fixes:
682cd3cf946b ("tipc: confgiure and apply UDP bearer MTU on running links")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xin Long [Sun, 14 May 2023 19:52:28 +0000 (15:52 -0400)]
tipc: do not update mtu if msg_max is too small in mtu negotiation
[ Upstream commit
56077b56cd3fb78e1c8619e29581ba25a5c55e86 ]
When doing link mtu negotiation, a malicious peer may send Activate msg
with a very small mtu, e.g. 4 in Shuang's testing, without checking for
the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then
n->links[bearer_id].mtu is set to
4294967228, which is a overflow of
'4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss().
With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning:
tipc: Too large msg, purging xmit list 1 5 0 40 4!
tipc: Too large msg, purging xmit list 1 15 0 60 4!
And with tipc_link_entry.mtu
4294967228, a huge skb was allocated in
named_distribute(), and when purging it in tipc_link_xmit(), a crash
was even caused:
general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta #19
RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0
Call Trace:
<IRQ>
skb_release_data+0xf9/0x1d0
kfree_skb_reason+0x40/0x100
tipc_link_xmit+0x57a/0x740 [tipc]
tipc_node_xmit+0x16c/0x5c0 [tipc]
tipc_named_node_up+0x27f/0x2c0 [tipc]
tipc_node_write_unlock+0x149/0x170 [tipc]
tipc_rcv+0x608/0x740 [tipc]
tipc_udp_recv+0xdc/0x1f0 [tipc]
udp_queue_rcv_one_skb+0x33e/0x620
udp_unicast_rcv_skb.isra.72+0x75/0x90
__udp4_lib_rcv+0x56d/0xc20
ip_protocol_deliver_rcu+0x100/0x2d0
This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(),
and not updating mtu if it is too small.
Fixes:
ed193ece2649 ("tipc: simplify link mtu negotiation")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xin Long [Sun, 14 May 2023 19:52:27 +0000 (15:52 -0400)]
tipc: add tipc_bearer_min_mtu to calculate min mtu
[ Upstream commit
3ae6d66b605be604644d4bb5708a7ffd9cf1abe8 ]
As different media may requires different min mtu, and even the
same media with different net family requires different min mtu,
add tipc_bearer_min_mtu() to calculate min mtu accordingly.
This API will be used to check the new mtu when doing the link
mtu negotiation in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of:
56077b56cd3f ("tipc: do not update mtu if msg_max is too small in mtu negotiation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Feng Liu [Fri, 12 May 2023 15:18:12 +0000 (11:18 -0400)]
virtio_net: Fix error unwinding of XDP initialization
[ Upstream commit
5306623a9826aa7d63b32c6a3803c798a765474d ]
When initializing XDP in virtnet_open(), some rq xdp initialization
may hit an error causing net device open failed. However, previous
rqs have already initialized XDP and enabled NAPI, which is not the
expected behavior. Need to roll back the previous rq initialization
to avoid leaks in error unwinding of init code.
Also extract helper functions of disable and enable queue pairs.
Use newly introduced disable helper function in error unwinding and
virtnet_close. Use enable helper function in virtnet_open.
Fixes:
754b8a21a96d ("virtio_net: setup xdp_rxq_info")
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Parav Pandit [Fri, 3 Feb 2023 13:37:38 +0000 (15:37 +0200)]
virtio-net: Maintain reverse cleanup order
[ Upstream commit
27369c9c2b722617063d6b80c758ab153f1d95d4 ]
To easily audit the code, better to keep the device stop()
sequence to be mirror of the device open() sequence.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of:
5306623a9826 ("virtio_net: Fix error unwinding of XDP initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dong Chenchen [Thu, 11 May 2023 12:54:40 +0000 (20:54 +0800)]
net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment()
[ Upstream commit
c83b49383b595be50647f0c764a48c78b5f3c4f8 ]
As the call trace shows, skb_panic was caused by wrong skb->mac_header
in nsh_gso_segment():
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-
20230505 #1
RIP: 0010:skb_panic+0xda/0xe0
call Trace:
skb_push+0x91/0xa0
nsh_gso_segment+0x4f3/0x570
skb_mac_gso_segment+0x19e/0x270
__skb_gso_segment+0x1e8/0x3c0
validate_xmit_skb+0x452/0x890
validate_xmit_skb_list+0x99/0xd0
sch_direct_xmit+0x294/0x7c0
__dev_queue_xmit+0x16f0/0x1d70
packet_xmit+0x185/0x210
packet_snd+0xc15/0x1170
packet_sendmsg+0x7b/0xa0
sock_sendmsg+0x14f/0x160
The root cause is:
nsh_gso_segment() use skb->network_header - nhoff to reset mac_header
in skb_gso_error_unwind() if inner-layer protocol gso fails.
However, skb->network_header may be reset by inner-layer protocol
gso function e.g. mpls_gso_segment. skb->mac_header reset by the
inaccurate network_header will be larger than skb headroom.
nsh_gso_segment
nhoff = skb->network_header - skb->mac_header;
__skb_pull(skb,nsh_len)
skb_mac_gso_segment
mpls_gso_segment
skb_reset_network_header(skb);//skb->network_header+=nsh_len
return -EINVAL;
skb_gso_error_unwind
skb_push(skb, nsh_len);
skb->mac_header = skb->network_header - nhoff;
// skb->mac_header > skb->headroom, cause skb_push panic
Use correct mac_offset to restore mac_header and get rid of nhoff.
Fixes:
c411ed854584 ("nsh: add GSO support")
Reported-by: syzbot+632b5d9964208bfef8c0@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 17 Apr 2023 21:04:11 +0000 (23:04 +0200)]
drm/exynos: fix g2d_open/close helper function definitions
[ Upstream commit
2ef0785b30bd6549ddbc124979f1b6596e065ae2 ]
The empty stub functions are defined as global functions, which
causes a warning because of missing prototypes:
drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close'
Mark them as 'static inline' to avoid the warning and to make
them behave as intended.
Fixes:
eb4d9796fa34 ("drm/exynos: g2d: Convert to driver component API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ranjani Sridharan [Fri, 12 May 2023 11:46:30 +0000 (14:46 +0300)]
ASoC: SOF: topology: Fix logic for copying tuples
[ Upstream commit
41c5305cc3d827d2ea686533777a285176ae01a0 ]
Topology could have more instances of the tokens being searched for than
the number of sets that need to be copied. Stop copying token after the
limit of number of token instances has been reached. This worked before
only by chance as we had allocated more size for the tuples array than
the number of actual tokens being parsed.
Fixes:
7006d20e5e9d ("ASoC: SOF: Introduce IPC3 ops")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512114630.24439-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Thu, 11 May 2023 16:25:12 +0000 (09:25 -0700)]
ASoC: mediatek: mt8186: Fix use-after-free in driver remove path
[ Upstream commit
a93d2afd3f77a7331271a0f25c6a11003db69b3c ]
When devm runs function in the "remove" path for a device it runs them
in the reverse order. That means that if you have parts of your driver
that aren't using devm or are using "roll your own" devm w/
devm_add_action_or_reset() you need to keep that in mind.
The mt8186 audio driver didn't quite get this right. Specifically, in
mt8186_init_clock() it called mt8186_audsys_clk_register() and then
went on to call a bunch of other devm function. The caller of
mt8186_init_clock() used devm_add_action_or_reset() to call
mt8186_deinit_clock() but, because of the intervening devm functions,
the order was wrong.
Specifically at probe time, the order was:
1. mt8186_audsys_clk_register()
2. afe_priv->clk = devm_kcalloc(...)
3. afe_priv->clk[i] = devm_clk_get(...)
At remove time, the order (which should have been 3, 2, 1) was:
1. mt8186_audsys_clk_unregister()
3. Free all of afe_priv->clk[i]
2. Free afe_priv->clk
The above seemed to be causing a use-after-free. Luckily, it's easy to
fix this by simply using devm more correctly. Let's move the
devm_add_action_or_reset() to the right place. In addition to fixing
the use-after-free, code inspection shows that this fixes a leak
(missing call to mt8186_audsys_clk_unregister()) that would have
happened if any of the syscon_regmap_lookup_by_phandle() calls in
mt8186_init_clock() had failed.
Fixes:
55b423d5623c ("ASoC: mediatek: mt8186: support audio clock control in platform driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org
Link: https://lore.kernel.org/r/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuck Lever [Sun, 14 May 2023 19:51:48 +0000 (15:51 -0400)]
SUNRPC: Fix trace_svc_register() call site
[ Upstream commit
07a27305938559fb35f7a46fb90a5e37728bdee6 ]
The trace event recorded incorrect values for the registered family,
protocol, and port because the arguments are in the wrong order.
Fixes:
b4af59328c25 ("SUNRPC: Trace server-side rpcbind registration events")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
NeilBrown [Mon, 8 May 2023 23:42:47 +0000 (09:42 +1000)]
SUNRPC: always free ctxt when freeing deferred request
[ Upstream commit
948f072ada23e0a504c5e4d7d71d4c83bd0785ec ]
Since the ->xprt_ctxt pointer was added to svc_deferred_req, it has not
been sufficient to use kfree() to free a deferred request. We may need
to free the ctxt as well.
As freeing the ctxt is all that ->xpo_release_rqst() does, we repurpose
it to explicit do that even when the ctxt is not stored in an rqst.
So we now have ->xpo_release_ctxt() which is given an xprt and a ctxt,
which may have been taken either from an rqst or from a dreq. The
caller is now responsible for clearing that pointer after the call to
->xpo_release_ctxt.
We also clear dr->xprt_ctxt when the ctxt is moved into a new rqst when
revisiting a deferred request. This ensures there is only one pointer
to the ctxt, so the risk of double freeing in future is reduced. The
new code in svc_xprt_release which releases both the ctxt and any
rq_deferred depends on this.
Fixes:
773f91b2cf3f ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
NeilBrown [Mon, 8 May 2023 23:41:49 +0000 (09:41 +1000)]
SUNRPC: double free xprt_ctxt while still in use
[ Upstream commit
eb8d3a2c809abd73ab0a060fe971d6b9019aa3c1 ]
When an RPC request is deferred, the rq_xprt_ctxt pointer is moved out
of the svc_rqst into the svc_deferred_req.
When the deferred request is revisited, the pointer is copied into
the new svc_rqst - and also remains in the svc_deferred_req.
In the (rare?) case that the request is deferred a second time, the old
svc_deferred_req is reused - it still has all the correct content.
However in that case the rq_xprt_ctxt pointer is NOT cleared so that
when xpo_release_xprt is called, the ctxt is freed (UDP) or possible
added to a free list (RDMA).
When the deferred request is revisited for a second time, it will
reference this ctxt which may be invalid, and the free the object a
second time which is likely to oops.
So change svc_defer() to *always* clear rq_xprt_ctxt, and assert that
the value is now stored in the svc_deferred_req.
Fixes:
773f91b2cf3f ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Duoming Zhou [Wed, 8 Mar 2023 12:55:14 +0000 (12:55 +0000)]
media: netup_unidvb: fix use-after-free at del_timer()
[ Upstream commit
0f5bb36bf9b39a2a96e730bf4455095b50713f63 ]
When Universal DVB card is detaching, netup_unidvb_dma_fini()
uses del_timer() to stop dma->timeout timer. But when timer
handler netup_unidvb_dma_timeout() is running, del_timer()
could not stop it. As a result, the use-after-free bug could
happen. The process is shown below:
(cleanup routine) | (timer routine)
| mod_timer(&dev->tx_sim_timer, ..)
netup_unidvb_finidev() | (wait a time)
netup_unidvb_dma_fini() | netup_unidvb_dma_timeout()
del_timer(&dma->timeout); |
| ndev->pci_dev->dev //USE
Fix by changing del_timer() to del_timer_sync().
Link: https://lore.kernel.org/linux-media/20230308125514.4208-1-duoming@zju.edu.cn
Fixes:
52b1eaf4c59a ("[media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jijie Shao [Fri, 12 May 2023 10:00:14 +0000 (18:00 +0800)]
net: hns3: fix reset timeout when enable full VF
[ Upstream commit
6b45d5ff8c2c61baddd67d7510075ae121c5e704 ]
The timeout of the cmdq reset command has been increased to
resolve the reset timeout issue in the full VF scenario.
The timeout of other cmdq commands remains unchanged.
Fixes:
8d307f8e8cf1 ("net: hns3: create new set of unified hclge_comm_cmd_send APIs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jie Wang [Fri, 12 May 2023 10:00:13 +0000 (18:00 +0800)]
net: hns3: fix reset delay time to avoid configuration timeout
[ Upstream commit
814d0c786068e858d889ada3153bff82f64223ad ]
Currently the hns3 vf function reset delays 5000ms before vf rebuild
process. In product applications, this delay is too long for application
configurations and causes configuration timeout.
According to the tests, 500ms delay is enough for reset process except PF
FLR. So this patch modifies delay to 500ms in these scenarios.
Fixes:
6988eb2a9b77 ("net: hns3: Add support to reset the enet/ring mgmt layer")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jijie Shao [Fri, 12 May 2023 10:00:12 +0000 (18:00 +0800)]
net: hns3: fix sending pfc frames after reset issue
[ Upstream commit
f14db07064727dd3bc0906c77a6d2759c1bbb395 ]
To prevent the system from abnormally sending PFC frames after an
abnormal reset. The hns3 driver notifies the firmware to disable pfc
before reset.
Fixes:
35d93a30040c ("net: hns3: adjust the process of PF reset")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jie Wang [Fri, 12 May 2023 10:00:11 +0000 (18:00 +0800)]
net: hns3: fix output information incomplete for dumping tx queue info with debugfs
[ Upstream commit
89f6bfb071182f05d7188c255b0e7251c3806f16 ]
In function hns3_dump_tx_queue_info, The print buffer is not enough when
the tx BD number is configured to 32760. As a result several BD
information wouldn't be displayed.
So fix it by increasing the tx queue print buffer length.
Fixes:
630a6738da82 ("net: hns3: adjust string spaces of some parameters of tx bd info in debugfs")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Clément Léger [Fri, 12 May 2023 07:27:12 +0000 (09:27 +0200)]
net: dsa: rzn1-a5psw: disable learning for standalone ports
[ Upstream commit
ec52b69c046a6219011af780aca155a96719637b ]
When ports are in standalone mode, they should have learning disabled to
avoid adding new entries in the MAC lookup table which might be used by
other bridge ports to forward packets. While adding that, also make sure
learning is enabled for CPU port.
Fixes:
888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexis Lothoré [Fri, 12 May 2023 07:27:11 +0000 (09:27 +0200)]
net: dsa: rzn1-a5psw: fix STP states handling
[ Upstream commit
ebe9bc50952757b4b25eaf514da7c464196c9606 ]
stp_set_state() should actually allow receiving BPDU while in LEARNING
mode which is not the case. Additionally, the BLOCKEN bit does not
actually forbid sending forwarded frames from that port. To fix this, add
a5psw_port_tx_enable() function which allows to disable TX. However, while
its name suggest that TX is totally disabled, it is not and can still
allow to send BPDUs even if disabled. This can be done by using forced
forwarding with the switch tagging mechanism but keeping "filtering"
disabled (which is already the case in the rzn1-a5sw tag driver). With
these fixes, STP support is now functional.
Fixes:
888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Clément Léger [Fri, 12 May 2023 07:27:10 +0000 (09:27 +0200)]
net: dsa: rzn1-a5psw: enable management frames for CPU port
[ Upstream commit
9e4b45f20c5aac786c728619e5ee746bffce1798 ]
Currently, management frame were discarded before reaching the CPU port due
to a misconfiguration of the MGMT_CONFIG register. Enable them by setting
the correct value in this register in order to correctly receive management
frame and handle STP.
Fixes:
888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xin Long [Thu, 11 May 2023 23:22:11 +0000 (19:22 -0400)]
erspan: get the proto with the md version for collect_md
[ Upstream commit
d80fc101d2eb9b3188c228d61223890aeea480a4 ]
In commit
20704bd1633d ("erspan: build the header with the right proto
according to erspan_ver"), it gets the proto with t->parms.erspan_ver,
but t->parms.erspan_ver is not used by collect_md branch, and instead
it should get the proto with md->version for collect_md.
Thanks to Kevin for pointing this out.
Fixes:
20704bd1633d ("erspan: build the header with the right proto according to erspan_ver")
Fixes:
94d7d8f29287 ("ip6_gre: add erspan v2 support")
Reported-by: Kevin Traynor <ktraynor@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Doug Berger [Thu, 27 Apr 2023 18:19:16 +0000 (11:19 -0700)]
serial: 8250_bcm7271: fix leak in `brcmuart_probe`
[ Upstream commit
f264f2f6f4788dc031cef60a0cf2881902736709 ]
Smatch reports:
drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn:
'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032.
The issue is fixed by using a managed clock.
Fixes:
41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Reported-by: XuDong Liu <m202071377@hust.edu.cn>
Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230427181916.2983697-3-opendmb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Doug Berger [Thu, 27 Apr 2023 18:19:15 +0000 (11:19 -0700)]
serial: 8250_bcm7271: balance clk_enable calls
[ Upstream commit
8a3b5477256a54ae4a470dcebbcf8cdc18e4696d ]
The sw_baud clock must be disabled when the device driver is not
connected to the device. This now occurs when probe fails and
upon remove.
Fixes:
41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Reported-by: XuDong Liu <m202071377@hust.edu.cn>
Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230427181916.2983697-2-opendmb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ke Zhang [Fri, 28 Apr 2023 03:16:36 +0000 (11:16 +0800)]
serial: arc_uart: fix of_iomap leak in `arc_serial_probe`
[ Upstream commit
8ab5fc55d7f65d58a3c3aeadf11bdf60267cd2bd ]
Smatch reports:
drivers/tty/serial/arc_uart.c:631 arc_serial_probe() warn:
'port->membase' from of_iomap() not released on lines: 631.
In arc_serial_probe(), if uart_add_one_port() fails,
port->membase is not released, which would cause a resource leak.
To fix this, I replace of_iomap with devm_platform_ioremap_resource.
Fixes:
8dbe1d5e09a7 ("serial/arc: inline the probe helper")
Signed-off-by: Ke Zhang <m202171830@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230428031636.44642-1-m202171830@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 11 May 2023 11:47:49 +0000 (11:47 +0000)]
tcp: fix possible sk_priority leak in tcp_v4_send_reset()
[ Upstream commit
1e306ec49a1f206fd2cc89a42fac6e6f592a8cc1 ]
When tcp_v4_send_reset() is called with @sk == NULL,
we do not change ctl_sk->sk_priority, which could have been
set from a prior invocation.
Change tcp_v4_send_reset() to set sk_priority and sk_mark
fields before calling ip_send_unicast_reply().
This means tcp_v4_send_reset() and tcp_v4_send_ack()
no longer have to clear ctl_sk->sk_mark after
their call to ip_send_unicast_reply().
Fixes:
f6c0f5d209fa ("tcp: honor SO_PRIORITY in TIME_WAIT state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhuang Shengen [Thu, 11 May 2023 11:34:30 +0000 (19:34 +0800)]
vsock: avoid to close connected socket after the timeout
[ Upstream commit
6d4486efe9c69626cab423456169e250a5cd3af5 ]
When client and server establish a connection through vsock,
the client send a request to the server to initiate the connection,
then start a timer to wait for the server's response. When the server's
RESPONSE message arrives, the timer also times out and exits. The
server's RESPONSE message is processed first, and the connection is
established. However, the client's timer also times out, the original
processing logic of the client is to directly set the state of this vsock
to CLOSE and return ETIMEDOUT. It will not notify the server when the port
is released, causing the server port remain.
when client's vsock_connect timeout，it should check sk state is
ESTABLISHED or not. if sk state is ESTABLISHED, it means the connection
is established, the client should not set the sk state to CLOSE
Note: I encountered this issue on kernel-4.18, which can be fixed by
this patch. Then I checked the latest code in the community
and found similar issue.
Fixes:
d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Zhuang Shengen <zhuangshengen@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pieter Jansen van Vuuren [Thu, 11 May 2023 09:43:33 +0000 (10:43 +0100)]
sfc: disable RXFCS and RXALL features by default
[ Upstream commit
134120b066044399ef59564ff3ba66ab344cfc5b ]
By default we would not want RXFCS and RXALL features enabled as they are
mainly intended for debugging purposes. This does not stop users from
enabling them later on as needed.
Fixes:
8e57daf70671 ("sfc_ef100: RX path for EF100")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryan C. Underwood [Thu, 11 May 2023 17:32:21 +0000 (12:32 -0500)]
ALSA: hda/realtek: Apply HP B&O top speaker profile to Pavilion 15
[ Upstream commit
92553ee03166ef8fa978e7683f9f4af30c9c4e6b ]
The Pavilion 15 line has B&O top speakers similar to the x360 and
applying the same profile produces good sound. Without this, the
sound would be tinny and underpowered without either applying
model=alc295-hp-x360 or booting another OS first.
Signed-off-by: Ryan Underwood <nemesis@icequake.net>
Fixes:
563785edfcef ("ALSA: hda/realtek - Add quirk entry for HP Pavilion 15")
Link: https://lore.kernel.org/r/ZF0mpcMz3ezP9KQw@icequake.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryder Lee [Sun, 23 Apr 2023 21:39:06 +0000 (05:39 +0800)]
wifi: mt76: connac: fix stats->tx_bytes calculation
[ Upstream commit
c7ab7a29ef5c0779574120d922256ce4651555d3 ]
The stats->tx_bytes shall subtract retry byte from tx byte.
Fixes:
43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/b3cd45596943cf5a06b2e08e2fe732ab0b51311b.1682285873.git.ryder.lee@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 9 May 2023 09:07:11 +0000 (12:07 +0300)]
ALSA: firewire-digi00x: prevent potential use after free
[ Upstream commit
c0e72058d5e21982e61a29de6b098f7c1f0db498 ]
This code was supposed to return an error code if init_stream()
failed, but it instead freed dg00x->rx_stream and returned success.
This potentially leads to a use after free.
Fixes:
9a08067ec318 ("ALSA: firewire-digi00x: support AMDTP domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/c224cbd5-d9e2-4cd4-9bcf-2138eb1d35c6@kili.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Grygorii Strashko [Wed, 10 May 2023 12:51:39 +0000 (18:21 +0530)]
net: phy: dp83867: add w/a for packet errors seen with short cables
[ Upstream commit
0b01db274028f5acd207332686ffc92ac77491ac ]
Introduce the W/A for packet errors seen with short cables (<1m) between
two DP83867 PHYs.
The W/A recommended by DM requires FFE Equalizer Configuration tuning by
writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard
and soft resets as follows:
write_reg(0x001F, 0x8000); //hard reset
write_reg(DSP_FFE_CFG, 0x0E81);
write_reg(0x001F, 0x4000); //soft reset
Since DP83867 PHY DM says "Changing this register to 0x0E81, will not
affect Long Cable performance.", enable the W/A by default.
Fixes:
2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Wed, 10 May 2023 20:00:20 +0000 (22:00 +0200)]
net: fec: Better handle pm_runtime_get() failing in .remove()
[ Upstream commit
f816b9829b19394d318e01953aa3b2721bca040d ]
In the (unlikely) event that pm_runtime_get() (disguised as
pm_runtime_resume_and_get()) fails, the remove callback returned an
error early. The problem with this is that the driver core ignores the
error value and continues removing the device. This results in a
resource leak. Worse the devm allocated resources are freed and so if a
callback of the driver is called later the register mapping is already
gone which probably results in a crash.
Fixes:
a31eda65ba21 ("net: fec: fix clock count mis-match")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230510200020.1534610-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Mayer [Wed, 10 May 2023 11:16:38 +0000 (13:16 +0200)]
selftets: seg6: disable rp_filter by default in srv6_end_dt4_l3vpn_test
[ Upstream commit
f97b8401e0deb46ad1e4245c21f651f64f55aaa6 ]
On some distributions, the rp_filter is automatically set (=1) by
default on a netdev basis (also on VRFs).
In an SRv6 End.DT4 behavior, decapsulated IPv4 packets are routed using
the table associated with the VRF bound to that tunnel. During lookup
operations, the rp_filter can lead to packet loss when activated on the
VRF.
Therefore, we chose to make this selftest more robust by explicitly
disabling the rp_filter during tests (as it is automatically set by some
Linux distributions).
Fixes:
2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Mayer [Wed, 10 May 2023 11:16:37 +0000 (13:16 +0200)]
selftests: seg6: disable DAD on IPv6 router cfg for srv6_end_dt4_l3vpn_test
[ Upstream commit
21a933c79a33add3612808f3be4ad65dd4dc026b ]
The srv6_end_dt4_l3vpn_test instantiates a virtual network consisting of
several routers (rt-1, rt-2) and hosts.
When the IPv6 addresses of rt-{1,2} routers are configured, the Deduplicate
Address Detection (DAD) kicks in when enabled in the Linux distros running
the selftests. DAD is used to check whether an IPv6 address is already
assigned in a network. Such a mechanism consists of sending an ICMPv6 Echo
Request and waiting for a reply.
As the DAD process could take too long to complete, it may cause the
failing of some tests carried out by the srv6_end_dt4_l3vpn_test script.
To make the srv6_end_dt4_l3vpn_test more robust, we disable DAD on routers
since we configure the virtual network manually and do not need any address
deduplication mechanism at all.
Fixes:
2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rob Clark [Tue, 9 May 2023 20:30:41 +0000 (13:30 -0700)]
drm/msm: Fix submit error-path leaks
[ Upstream commit
68dc6c2d5eec45515855cce99256162f45651a0b ]
For errors after msm_submitqueue_get(), we need to drop the submitqueue
reference. Additionally after get_unused_fd() we need to drop the fd.
The ordering for dropping the queue lock and put_unused_fd() is not
important, so just move this all into out_post_unlock.
v2: Only drop queue ref if submit doesn't take it
v3: Fix unitialized submit ref in error path
v4: IS_ERR_OR_NULL()
Reported-by: pinkperfect2021@gmail.com
Fixes:
f0de40a131d9 drm/msm: ("Reorder lock vs submit alloc")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/536073/
Link: https://lore.kernel.org/r/20230509203041.440619-1-robdclark@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tobias Brunner [Tue, 9 May 2023 09:00:06 +0000 (11:00 +0200)]
af_key: Reject optional tunnel/BEET mode templates in outbound policies
[ Upstream commit
cf3128a7aca55b2eefb68281d44749c683bdc96f ]
xfrm_state_find() uses `encap_family` of the current template with
the passed local and remote addresses to find a matching state.
If an optional tunnel or BEET mode template is skipped in a mixed-family
scenario, there could be a mismatch causing an out-of-bounds read as
the addresses were not replaced to match the family of the next template.
While there are theoretical use cases for optional templates in outbound
policies, the only practical one is to skip IPComp states in inbound
policies if uncompressed packets are received that are handled by an
implicitly created IPIP state instead.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tobias Brunner [Tue, 9 May 2023 08:59:58 +0000 (10:59 +0200)]
xfrm: Reject optional tunnel/BEET mode templates in outbound policies
[ Upstream commit
3d776e31c841ba2f69895d2255a49320bec7cea6 ]
xfrm_state_find() uses `encap_family` of the current template with
the passed local and remote addresses to find a matching state.
If an optional tunnel or BEET mode template is skipped in a mixed-family
scenario, there could be a mismatch causing an out-of-bounds read as
the addresses were not replaced to match the family of the next template.
While there are theoretical use cases for optional templates in outbound
policies, the only practical one is to skip IPComp states in inbound
policies if uncompressed packets are received that are handled by an
implicitly created IPIP state instead.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wyes Karny [Thu, 4 May 2023 06:25:44 +0000 (06:25 +0000)]
cpupower: Make TSC read per CPU for Mperf monitor
[ Upstream commit
c2adb1877b76fc81ae041e1db1a6ed2078c6746b ]
System-wide TSC read could cause a drift in C0 percentage calculation.
Because if first TSC is read and then one by one mperf is read for all
cpus, this introduces drift between mperf reading of later CPUs and TSC
reading. To lower this drift read TSC per CPU and also just after mperf
read. This technique improves C0 percentage calculation in Mperf monitor.
Before fix: (System 100% busy)
| Mperf || RAPL || Idle_Stats
PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2
0| 0| 0| 87.15| 12.85| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 0| 256| 84.62| 15.38| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 1| 1| 87.15| 12.85| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 1| 257| 84.08| 15.92| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 2| 2| 86.61| 13.39| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 2| 258| 83.26| 16.74| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 3| 3| 86.61| 13.39| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 3| 259| 83.60| 16.40| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 4| 4| 86.33| 13.67| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 4| 260| 83.33| 16.67| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 5| 5| 86.06| 13.94| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 5| 261| 83.05| 16.95| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
0| 6| 6| 85.51| 14.49| 2695||
168659003|3970468|| 0.00| 0.00| 0.00
After fix: (System 100% busy)
| Mperf || RAPL || Idle_Stats
PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2
0| 0| 0| 98.03| 1.97| 2415||
163295480|3811189|| 0.00| 0.00| 0.00
0| 0| 256| 98.50| 1.50| 2394||
163295480|3811189|| 0.00| 0.00| 0.00
0| 1| 1| 99.99| 0.01| 2401||
163295480|3811189|| 0.00| 0.00| 0.00
0| 1| 257| 99.99| 0.01| 2375||
163295480|3811189|| 0.00| 0.00| 0.00
0| 2| 2| 99.99| 0.01| 2401||
163295480|3811189|| 0.00| 0.00| 0.00
0| 2| 258|100.00| 0.00| 2401||
163295480|3811189|| 0.00| 0.00| 0.00
0| 3| 3|100.00| 0.00| 2401||
163295480|3811189|| 0.00| 0.00| 0.00
0| 3| 259| 99.99| 0.01| 2435||
163295480|3811189|| 0.00| 0.00| 0.00
0| 4| 4|100.00| 0.00| 2401||
163295480|3811189|| 0.00| 0.00| 0.00
0| 4| 260|100.00| 0.00| 2435||
163295480|3811189|| 0.00| 0.00| 0.00
0| 5| 5| 99.99| 0.01| 2401||
163295480|3811189|| 0.00| 0.00| 0.00
0| 5| 261|100.00| 0.00| 2435||
163295480|3811189|| 0.00| 0.00| 0.00
0| 6| 6|100.00| 0.00| 2401||
163295480|3811189|| 0.00| 0.00| 0.00
0| 6| 262|100.00| 0.00| 2435||
163295480|3811189|| 0.00| 0.00| 0.00
Cc: Thomas Renninger <trenn@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes:
7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shengjiu Wang [Mon, 8 May 2023 10:16:36 +0000 (18:16 +0800)]
ASoC: fsl_micfil: Fix error handler with pm_runtime_enable
[ Upstream commit
17955aba7877a4494d8093ae5498e19469b01d57 ]
There is error message when defer probe happens:
fsl-micfil-dai
30ca0000.micfil: Unbalanced pm_runtime_enable!
Fix the error handler with pm_runtime_enable and add
fsl_micfil_remove() for pm_runtime_disable.
Fixes:
47a70e6fc9a8 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com
Link: https://lore.kernel.org/r/1683540996-6136-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Fri, 9 Dec 2022 15:09:14 +0000 (16:09 +0100)]
platform: Provide a remove callback that returns no value
[ Upstream commit
5c5a7680e67ba6fbbb5f4d79fa41485450c1985c ]
struct platform_driver::remove returning an integer made driver authors
expect that returning an error code was proper error handling. However
the driver core ignores the error and continues to remove the device
because there is nothing the core could do anyhow and reentering the
remove callback again is only calling for trouble.
So this is an source for errors typically yielding resource leaks in the
error path.
As there are too many platform drivers to neatly convert them all to
return void in a single go, do it in several steps after this patch:
a) Convert all drivers to implement .remove_new() returning void instead
of .remove() returning int;
b) Change struct platform_driver::remove() to return void and so make
it identical to .remove_new();
c) Change all drivers back to .remove() now with the better prototype;
d) drop struct platform_driver::remove_new().
While this touches all drivers eventually twice, steps a) and c) can be
done one driver after another and so reduces coordination efforts
immensely and simplifies review.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221209150914.3557650-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of:
17955aba7877 ("ASoC: fsl_micfil: Fix error handler with pm_runtime_enable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jianhua Lu [Thu, 27 Apr 2023 12:21:32 +0000 (20:21 +0800)]
dt-bindings: display/msm: dsi-controller-main: Document qcom, master-dsi and qcom, sync-dual-dsi
[ Upstream commit
ca29699a57ecee6084a4056f5bfd6f11dd359a71 ]
This fixes warning:
sm8250-xiaomi-elish-csot.dtb: dsi@ae94000: Unevaluated properties are not allowed ('qcom,master-dsi', 'qcom,sync-dual-dsi' were unexpected)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Fixes:
4dbe55c97741 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534306/
Link: https://lore.kernel.org/r/20230427122132.24840-1-lujianhua000@gmail.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marijn Suijten [Wed, 26 Apr 2023 22:37:22 +0000 (00:37 +0200)]
drm/msm/dpu: Remove duplicate register defines from INTF
[ Upstream commit
202c044203ac5860e3025169105368d99f9bc6a2 ]
The INTF_FRAME_LINE_COUNT_EN, INTF_FRAME_COUNT and INTF_LINE_COUNT
registers are already defined higher up, in the right place when sorted
numerically.
Fixes:
25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534231/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-8-27ce1a5ab5c6@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marijn Suijten [Wed, 26 Apr 2023 22:37:17 +0000 (00:37 +0200)]
drm/msm/dpu: Move non-MDP_TOP INTF_INTR offsets out of hwio header
[ Upstream commit
e9d9ce5462fecdeefec87953de71df4d025cbc72 ]
These offsets do not fall under the MDP TOP block and do not fit the
comment right above. Move them to dpu_hw_interrupts.c next to the
repsective MDP_INTF_x_OFF interrupt block offsets.
Fixes:
25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/534203/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-3-27ce1a5ab5c6@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marijn Suijten [Tue, 25 Apr 2023 23:11:09 +0000 (01:11 +0200)]
drm/msm/dpu: Assign missing writeback log_mask
[ Upstream commit
a432fc31f03db2546a48bcf5dd69ca28ceb732bf ]
The WB debug log mask ended up never being assigned, leading to writes
to this block to never be logged even if the mask is enabled in
dpu_hw_util_log_mask via debugfs.
Fixes:
84a33d0fd921 ("drm/msm/dpu: add dpu_hw_wb abstraction for writeback blocks")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/533860/
Link: https://lore.kernel.org/r/20230418-dpu-drop-useless-for-lookup-v3-1-e8d869eea455@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivas Kandagatla [Fri, 21 Apr 2023 14:56:57 +0000 (15:56 +0100)]
drm/msm/dp: unregister audio driver during unbind
[ Upstream commit
85c636284cb63b7740b4ae98881ace92158068d3 ]
while binding the code always registers a audio driver, however there
is no corresponding unregistration done in unbind. This leads to multiple
redundant audio platform devices if dp_display_bind and dp_display_unbind
happens multiple times during startup. On X13s platform this resulted in
6 to 9 audio codec device instead of just 3 codec devices for 3 dp ports.
Fix this by unregistering codecs on unbind.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes:
d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/533324/
Link: https://lore.kernel.org/r/20230421145657.12186-1-srinivas.kandagatla@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Willi [Tue, 25 Apr 2023 07:46:18 +0000 (09:46 +0200)]
Revert "Fix XFRM-I support for nested ESP tunnels"
[ Upstream commit
5fc46f94219d1d103ffb5f0832be9da674d85a73 ]
This reverts commit
b0355dbbf13c0052931dd14c38c789efed64d3de.
The reverted commit clears the secpath on packets received via xfrm interfaces
to support nested IPsec tunnels. This breaks Netfilter policy matching using
xt_policy in the FORWARD chain, as the secpath is missing during forwarding.
Additionally, Benedict Wong reports that it breaks Transport-in-Tunnel mode.
Fix this regression by reverting the commit until we have a better approach
for nested IPsec tunnels.
Fixes:
b0355dbbf13c ("Fix XFRM-I support for nested ESP tunnels")
Link: https://lore.kernel.org/netdev/20230412085615.124791-1-martin@strongswan.org/
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sabrina Dubroca [Tue, 4 Apr 2023 13:12:16 +0000 (15:12 +0200)]
xfrm: don't check the default policy if the policy allows the packet
[ Upstream commit
430cac487400494c19a8b85299e979bb07b4671f ]
The current code doesn't let a simple "allow" policy counteract a
default policy blocking all incoming packets:
ip x p setdefault in block
ip x p a src 192.168.2.1/32 dst 192.168.2.2/32 dir in action allow
At this stage, we have an allow policy (with or without transforms)
for this packet. It doesn't matter what the default policy says, since
the policy we looked up lets the packet through. The case of a
blocking policy is already handled separately, so we can remove this
check.
Fixes:
2d151d39073a ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Horatio Zhang [Thu, 4 May 2023 05:46:12 +0000 (01:46 -0400)]
drm/amdgpu: drop gfx_v11_0_cp_ecc_error_irq_funcs
[ Upstream commit
720b47229a5b24061d1c2e29ddb6043a59178d79 ]
The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still
use amdgpu_irq_put to disable this interrupt, which caused the call trace
in this function.
[ 102.873958] Call Trace:
[ 102.873959] <TASK>
[ 102.873961] gfx_v11_0_hw_fini+0x23/0x1e0 [amdgpu]
[ 102.874019] gfx_v11_0_suspend+0xe/0x20 [amdgpu]
[ 102.874072] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[ 102.874122] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 102.874172] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[ 102.874223] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[ 102.874321] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 102.874375] process_one_work+0x21f/0x3f0
[ 102.874377] worker_thread+0x200/0x3e0
[ 102.874378] ? process_one_work+0x3f0/0x3f0
[ 102.874379] kthread+0xfd/0x130
[ 102.874380] ? kthread_complete_and_exit+0x20/0x20
[ 102.874381] ret_from_fork+0x22/0x30
v2:
- Handle umc and gfx ras cases in separated patch
- Retired the gfx_v11_0_cp_ecc_error_irq_funcs in gfx11
v3:
- Improve the subject and code comments
- Add judgment on gfx11 in the function of amdgpu_gfx_ras_late_init
v4:
- Drop the define of CP_ME1_PIPE_INST_ADDR_INTERVAL and
SET_ECC_ME_PIPE_STATE which using in gfx_v11_0_set_cp_ecc_error_state
- Check cp_ecc_error_irq.funcs rather than ip version for a more
sustainable life
v5:
- Simplify judgment conditions
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fae [Tue, 25 Apr 2023 06:36:44 +0000 (01:36 -0500)]
platform/x86: hp-wmi: add micmute to hp_wmi_keymap struct
[ Upstream commit
decab2825c3ef9b154c6f76bce40872ffb41c36f ]
Fixes micmute key of HP Envy X360 ey0xxx.
Signed-off-by: Fae <faenkhauser@gmail.com>
Link: https://lore.kernel.org/r/20230425063644.11828-1-faenkhauser@gmail.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jorge Lopez [Thu, 20 Oct 2022 20:10:28 +0000 (15:10 -0500)]
platform/x86: Move existing HP drivers to a new hp subdir
[ Upstream commit
6e9b8992b122cb12688bd259fc99e67d1be234eb ]
The purpose of this patch is to provide a central location where all
HP related drivers are found. HP drivers will recide under
drivers/platform/x86/hp directory.
Introduce changes to Kconfig file to list all HP driver under "HP X86
Platform Specific Device Drivers" menu option. Additional changes
include update MAINTAINERS file to indicate hp related drivers new
path.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20221020201033.12790-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of:
decab2825c3e ("platform/x86: hp-wmi: add micmute to hp_wmi_keymap struct")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guilherme G. Piccoli [Mon, 20 Feb 2023 21:11:05 +0000 (18:11 -0300)]
parisc: Replace regular spinlock with spin_trylock on panic path
[ Upstream commit
829632dae8321787525ee37dc4828bbe6edafdae ]
The panic notifiers' callbacks execute in an atomic context, with
interrupts/preemption disabled, and all CPUs not running the panic
function are off, so it's very dangerous to wait on a regular
spinlock, there's a risk of deadlock.
Refactor the panic notifier of parisc/power driver to make use
of spin_trylock - for that, we've added a second version of the
soft-power function. Also, some comments were reorganized and
trailing white spaces, useless header inclusion and blank lines
were removed.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeroen Roovers <jer@xs4all.nl>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jarkko Nikula [Thu, 30 Mar 2023 13:26:18 +0000 (16:26 +0300)]
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
[ Upstream commit
72d4a1683741ee578da0e265886e6a7f3d42266c ]
Add Intel Meteor Lake PCH-S also called as Meteor Point-S LPSS PCI IDs.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330132618.4108665-1-jarkko.nikula@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qiang Ning [Thu, 30 Mar 2023 02:43:53 +0000 (10:43 +0800)]
mfd: dln2: Fix memory leak in dln2_probe()
[ Upstream commit
96da8f148396329ba769246cb8ceaa35f1ddfc48 ]
When dln2_setup_rx_urbs() in dln2_probe() fails, error out_free forgets
to call usb_put_dev() to decrease the refcount of dln2->usb_dev.
Fix this by adding usb_put_dev() in the error handling code of
dln2_probe().
Signed-off-by: Qiang Ning <qning0106@126.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330024353.4503-1-qning0106@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Wed, 1 Mar 2023 09:54:02 +0000 (10:54 +0100)]
mfd: intel_soc_pmic_chtwc: Add Lenovo Yoga Book X90F to intel_cht_wc_models
[ Upstream commit
ded99b89d25fd73a1d7bd910378e0339fd9d4c4a ]
The Android Lenovo Yoga Book X90F / X90L uses the same charger / fuelgauge
setup as the already supported Windows Lenovo Yoga Book X91F/L, add
a DMI match for this to intel_cht_wc_models with driver_data
set to INTEL_CHT_WC_LENOVO_YOGABOOK1.
When the quirk for the X91F/L was initially added it was written to
also apply to the X90F/L but this does not work because the Android
version of the Yoga Book uses completely different DMI strings.
Also adjust the X91F/L quirk to reflect that it only applies to
the X91F/L models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230301095402.28582-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Fitzgerald [Thu, 6 Apr 2023 13:46:40 +0000 (14:46 +0100)]
soundwire: bus: Fix unbalanced pm_runtime_put() causing usage count underflow
[ Upstream commit
e9537962519e88969f5f69cd0571eb4f6984403c ]
This reverts commit
443a98e649b4 ("soundwire: bus: use pm_runtime_resume_and_get()")
Change calls to pm_runtime_resume_and_get() back to pm_runtime_get_sync().
This fixes a usage count underrun caused by doing a pm_runtime_put() even
though pm_runtime_resume_and_get() returned an error.
The three affected functions ignore -EACCES error from trying to get
pm_runtime, and carry on, including a put at the end of the function.
But pm_runtime_resume_and_get() does not increment the usage count if it
returns an error. So in the -EACCES case you must not call
pm_runtime_put().
The documentation for pm_runtime_get_sync() says:
"Consider using pm_runtime_resume_and_get() ... as this is likely to
result in cleaner code."
In this case I don't think it results in cleaner code because the
pm_runtime_put() at the end of the function would have to be conditional on
the return value from pm_runtime_resume_and_get() at the top of the
function.
pm_runtime_get_sync() doesn't have this problem because it always
increments the count, so always needs a put. The code can just flow through
and do the pm_runtime_put() unconditionally.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230406134640.8582-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Kozlowski [Wed, 22 Feb 2023 14:44:12 +0000 (15:44 +0100)]
soundwire: qcom: gracefully handle too many ports in DT
[ Upstream commit
2367e0ecb498764e95cfda691ff0828f7d25f9a4 ]
There are two issues related to the number of ports coming from
Devicetree when exceeding in total QCOM_SDW_MAX_PORTS. Both lead to
incorrect memory accesses:
1. With DTS having too big value of input or output ports, the driver,
when copying port parameters from local/stack arrays into 'pconfig'
array in 'struct qcom_swrm_ctrl', will iterate over their sizes.
2. If DTS also has too many parameters for these ports (e.g.
qcom,ports-sinterval-low), the driver will overflow buffers on the
stack when reading these properties from DTS.
Add a sanity check so incorrect DTS will not cause kernel memory
corruption.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230222144412.237832-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alain Volmat [Fri, 10 Feb 2023 22:43:08 +0000 (23:43 +0100)]
phy: st: miphy28lp: use _poll_timeout functions for waits
[ Upstream commit
e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ]
This commit introduces _poll_timeout functions usage instead of
wait loops waiting for a status bit.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eugene Huang [Tue, 14 Mar 2023 09:06:18 +0000 (17:06 +0800)]
soundwire: dmi-quirks: add remapping for Intel 'Rooks County' NUC M15
[ Upstream commit
01b33e284ca28cc977bdcfb23be2c719f2139175 ]
Same DSDT problem as the HP Omen 16-k0005TX, except rt1316 amp is on
link2.
Link: https://github.com/thesofproject/linux/issues/4088
Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090618.498716-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hao Zeng [Wed, 26 Apr 2023 01:05:27 +0000 (09:05 +0800)]
recordmcount: Fix memory leaks in the uwrite function
[ Upstream commit
fa359d068574d29e7d2f0fdd0ebe4c6a12b5cfb9 ]
Common realloc mistake: 'file_append' nulled but not freed upon failure
Link: https://lkml.kernel.org/r/20230426010527.703093-1-zenghao@kylinos.cn
Signed-off-by: Hao Zeng <zenghao@kylinos.cn>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josh Poimboeuf [Wed, 12 Apr 2023 17:24:08 +0000 (10:24 -0700)]
lkdtm/stackleak: Fix noinstr violation
[ Upstream commit
f571da059f86fd9d432aea32c9c7e5aaa53245d8 ]
Fixes the following warning:
vmlinux.o: warning: objtool: check_stackleak_irqoff+0x2b6: call to _printk() leaves .noinstr.text section
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/ee5209f53aa0a62aea58be18f2b78b17606779a6.1681320026.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josh Poimboeuf [Wed, 12 Apr 2023 17:24:07 +0000 (10:24 -0700)]
sched: Fix KCSAN noinstr violation
[ Upstream commit
e0b081d17a9f4e5c0cbb0e5fbeb1abe3de0f7e4e ]
With KCSAN enabled, end_of_stack() can get out-of-lined. Force it
inline.
Fixes the following warnings:
vmlinux.o: warning: objtool: check_stackleak_irqoff+0x2b: call to end_of_stack() leaves .noinstr.text section
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/cc1b4d73d3a428a00d206242a68fdf99a934ca7b.1681320026.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodríguez Barbarin, José Javier [Tue, 11 Apr 2023 08:33:28 +0000 (10:33 +0200)]
mcb-pci: Reallocate memory region to avoid memory overlapping
[ Upstream commit
9be24faadd085c284890c3afcec7a0184642315a ]
mcb-pci requests a fixed-size memory region to parse the chameleon
table, however, if the chameleon table is smaller that the allocated
region, it could overlap with the IP Cores' memory regions.
After parsing the chameleon table, drop/reallocate the memory region
with the actual chameleon table size.
Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-3-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Tue, 18 Apr 2023 10:14:06 +0000 (13:14 +0300)]
serial: 8250: Reinit port->pm on port specific driver unbind
[ Upstream commit
04e82793f068d2f0ffe62fcea03d007a8cdc16a7 ]
When we unbind a serial port hardware specific 8250 driver, the generic
serial8250 driver takes over the port. After that we see an oops about 10
seconds later. This can produce the following at least on some TI SoCs:
Unhandled fault: imprecise external abort (0x1406)
Internal error: : 1406 [#1] SMP ARM
Turns out that we may still have the serial port hardware specific driver
port->pm in use, and serial8250_pm() tries to call it after the port
specific driver is gone:
serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base]
uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base]
uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c
__tty_hangup.part.0 from disassociate_ctty+0x154/0x20c
disassociate_ctty from do_exit+0x744/0xaac
do_exit from do_group_exit+0x40/0x8c
do_group_exit from __wake_up_parent+0x0/0x1c
Let's fix the issue by calling serial8250_set_defaults() in
serial8250_unregister_port(). This will set the port back to using
the serial8250 default functions, and sets the port->pm to point to
serial8250_pm.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Frank Wang [Thu, 16 Mar 2023 08:11:49 +0000 (16:11 +0800)]
usb: typec: tcpm: fix multiple times discover svids error
[ Upstream commit
dac3b192107b978198e89ec0f77375738352e0c8 ]
PD3.0 Spec 6.4.4.3.2 say that only Responder supports 12 or more SVIDs,
the Discover SVIDs Command Shall be executed multiple times until a
Discover SVIDs VDO is returned ending either with a SVID value of
0x0000 in the last part of the last VDO or with a VDO containing two
SVIDs with values of 0x0000.
In the current implementation, if the last VDO does not find that the
Discover SVIDs Command would be executed multiple times even if the
Responder SVIDs are less than 12, and we found some odd dockers just
meet this case. So fix it.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Link: https://lore.kernel.org/r/20230316081149.24519-1-frank.wang@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gerecke [Thu, 13 Apr 2023 18:17:43 +0000 (11:17 -0700)]
HID: wacom: generic: Set battery quirk only when we see battery data
[ Upstream commit
bea407a427baa019758f29f4d31b26f008bb8cc6 ]
Some devices will include battery status usages in the HID descriptor
but we won't see that battery data for one reason or another. For example,
AES sensors won't send battery data unless an AES pen is in proximity.
If a user does not have an AES pen but instead only interacts with the
AES touchscreen with their fingers then there is no need for us to create
a battery object. Similarly, if a family of peripherals shares the same
HID descriptor between wired-only and wireless-capable SKUs, users of the
former may never see a battery event and will not want a power_supply
object created.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217062
Link: https://gitlab.gnome.org/GNOME/gnome-control-center/-/issues/2354
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
weiliang1503 [Thu, 30 Mar 2023 11:56:38 +0000 (19:56 +0800)]
HID: Ignore battery for ELAN touchscreen on ROG Flow X13 GV301RA
[ Upstream commit
35903009dbde804a1565dc89e431c0f15179f054 ]
Ignore the reported battery level of the built-in touchscreen to suppress
battery warnings when a stylus is used. The device ID was added and the
battery ignore quirk was enabled.
Signed-off-by: weiliang1503 <weiliang1503@gmail.com>
Link: https://lore.kernel.org/r/20230330115638.16146-1-weiliang1503@gmail.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Henrie [Tue, 4 Apr 2023 02:48:29 +0000 (20:48 -0600)]
HID: apple: Set the tilde quirk flag on the Geyser 3
[ Upstream commit
29e1ecc197d410ee59c8877098d54cf417075f7d ]
I was finally able to obtain a MacBook1,1 to test and I've now confirmed
that it has the tilde key quirk as well:
Product Model Year System CPU Shape Labels Country Quirky
============================================================================
05ac:0218 A1181 2006 MacBook1,1 T2500 ISO British 13 Yes
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://lore.kernel.org/r/20230404024829.13982-1-alexhenrie24@gmail.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baishan Jiang [Wed, 12 Apr 2023 08:40:43 +0000 (16:40 +0800)]
ASoC: amd: yc: Add ThinkBook 14 G5+ ARP to quirks list for acp6x
[ Upstream commit
a8f5da0bf4d85a6ad03810d902aba61c572102a6 ]
ThinkBook 14 G5+ ARP uses Ryzen 7735H processor, and has the same
microphone problem as ThinkBook 14 G4+ ARA.
Adding 21HY to acp6x quirks table enables microphone for ThinkBook
14 G5+ ARP.
Signed-off-by: Baishan Jiang <bjiang400@outlook.com>
Link: https://lore.kernel.org/r/OS3P286MB1711DD6556284B69C79C0C4FE19B9@OS3P286MB1711.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cem Kaya [Mon, 10 Apr 2023 18:38:15 +0000 (20:38 +0200)]
ASoC: amd: Add Dell G15 5525 to quirks list
[ Upstream commit
faf15233e59052f4d61cad2da6e56daf33124d96 ]
Add Dell G15 5525 Ryzen Edition to quirks list for acp6x so that
internal mic works.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217155
Signed-off-by: Cem Kaya <cemkaya.boun@gmail.com>
Link: https://lore.kernel.org/r/20230410183814.260518-1-cemkaya.boun@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fred Oh [Thu, 6 Apr 2023 15:25:00 +0000 (10:25 -0500)]
ALSA: hda: LNL: add HD Audio PCI ID
[ Upstream commit
714b2f025d767e7df1fe9da18bd70537d64cc157 ]
Add HD Audio PCI ID for Intel Lunarlake platform.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230406152500.15104-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Samuel Čavoj [Wed, 5 Apr 2023 13:44:56 +0000 (16:44 +0300)]
usb: typec: ucsi: acpi: add quirk for ASUS Zenbook UM325
[ Upstream commit
326e1c208f3f24d14b93f910b8ae32c94923d22c ]
On some ACPI platforms (namely the ASUS Zenbook UM325) the _DSM method must
not be called after a notification is received but instead the mailbox
should be read immediately from RAM. This is because the ACPI interrupt
handler destroys the CCI in ERAM after copying to system memory, and when
_DSM is later called to perform a second copy, it retrieves a garbage
value.
Instead, the _DSM(read) method should only be called when necessary, i.e.
for polling the state after reset and for retrieving the version. Other
reads should not call _DSM and only peek into the RAM region.
This adds a separate read operation for the Zenbook that syncs the
ACPI mailbox only with polled commands.
Link: https://lore.kernel.org/linux-usb/20210823180626.tb6m7h5tp6adhvt2@fastboi.localdomain/
Signed-off-by: Samuel Čavoj <samuel@cavoj.net>
[ heikki : handling everything in ucsi_acpi.c with DMI quirk ]
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230405134456.49607-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kevin Groeneveld [Sat, 18 Mar 2023 22:21:32 +0000 (18:21 -0400)]
spi: spi-imx: fix MX51_ECSPI_* macros when cs > 3
[ Upstream commit
87c614175bbf28d3fd076dc2d166bac759e41427 ]
When using gpio based chip select the cs value can go outside the range
0 – 3. The various MX51_ECSPI_* macros did not take this into consideration
resulting in possible corruption of the configuration.
For example for any cs value over 3 the SCLKPHA bits would not be set and
other values in the register possibly corrupted.
One way to fix this is to just mask the cs bits to 2 bits. This still
allows all 4 native chip selects to work as well as gpio chip selects
(which can use any of the 4 chip select configurations).
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Link: https://lore.kernel.org/r/20230318222132.3373-1-kgroeneveld@lenbrook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bastien Nocera [Thu, 2 Mar 2023 13:01:17 +0000 (14:01 +0100)]
HID: logitech-hidpp: Reconcile USB and Unifying serials
[ Upstream commit
5b3691d15e04b6d5a32c915577b8dbc5cfb56382 ]
Now that USB HID++ devices can gather a serial number that matches the
one that would be gathered when connected through a Unifying receiver,
remove the last difference by dropping the product ID as devices
usually have different product IDs when connected through USB or
Unifying.
For example, on the serials on a G903 wired/wireless mouse:
- Unifying before patch: 4067-e8-ce-cd-45
- USB before patch: c086-e8-ce-cd-45
- Unifying and USB after patch: e8-ce-cd-45
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302130117.3975-2-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bastien Nocera [Thu, 2 Mar 2023 13:01:16 +0000 (14:01 +0100)]
HID: logitech-hidpp: Don't use the USB serial for USB devices
[ Upstream commit
7ad1fe0da0fa91bf920b79ab05ae97bfabecc4f4 ]
For devices that support the 0x0003 feature (Device Information) version 4,
set the serial based on the output of that feature, rather than relying
on the usbhid code setting the USB serial.
This should allow the serial when connected through USB to (nearly)
match the one when connected through a unifying receiver.
For example, on the serials on a G903 wired/wireless mouse:
- Unifying: 4067-e8-ce-cd-45
- USB before patch:
017C385C3837
- USB after patch: c086-e8-ce-cd-45
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302130117.3975-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Prajna Sariputra [Sat, 1 Apr 2023 15:21:30 +0000 (02:21 +1100)]
ASoC: amd: yc: Add DMI entries to support HP OMEN 16-n0xxx (8A42)
[ Upstream commit
ee4281de4d60288b9c802bb0906061ec355ecef2 ]
This model requires an additional detection quirk to enable the internal microphone.
Signed-off-by: Prajna Sariputra <putr4.s@gmail.com>
Link: https://lore.kernel.org/r/2283110.ElGaqSPkdT@n0067ax-linux62
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Khadija Kamran [Thu, 16 Mar 2023 20:09:00 +0000 (01:09 +0500)]
staging: axis-fifo: initialize timeouts in init only
[ Upstream commit
752cbd8f191678e86aa754f795546b7f06b7f171 ]
Initialize the module parameters, read_timeout and write_timeout once in
init().
Module parameters can only be set once and cannot be modified later, so we
don't need to evaluate them again when passing the parameters to
wait_event_interruptible_timeout().
Convert datatype of {read,write}_timeout from 'int' to 'long int' because
implicit conversion of 'long int' to 'int' in statement
'{read,write}_timeout = MAX_SCHEDULE_TIMEOUT' results in an overflow.
Change format specifier for {read,write}_timeout from %i to %li.
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Link: https://lore.kernel.org/r/ZBN3XAsItCiTk7CV@khadija-virtual-machine
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Henrie [Mon, 27 Feb 2023 03:06:13 +0000 (20:06 -0700)]
HID: apple: Set the tilde quirk flag on the Geyser 4 and later
[ Upstream commit
c3388ddc74a863466c7c3fa24d3a9cea9c9bca53 ]
I recently tested several old MacBooks and as far as I can tell, all
MacBooks that have an ISO keyboard have the tilde key quirk:
Product Model Year System CPU Shape Labels Country Quirky
============================================================================
05ac:021b A1181 2006 MacBook2,1 T5600 ISO British 13 Yes
05ac:021b A1181 2007 MacBook2,1 T7200 ISO Québécois 13 Yes
05ac:0229 A1181 2007 MacBook4,1 T8300 ANSI Usonian 33 No
05ac:022a A1181 2007 MacBook4,1 T8100 ISO English 13 Yes
05ac:022a A1181 2007 MacBook5,2 P7350 ISO Québécois 13 Yes
05ac:0237 A1278 2008 MacBook5,1 P7350 ISO Dutch 13 Yes
05ac:0237 A1278 2009 MacBook5,5 P7550 ISO British 13 Yes
The model number and year are from the laptop case. Since Apple printed
the same model and year on many different laptops, the system name (as
reported in the SMBIOS tables) and CPU form a more precise identifier.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Hortmann [Thu, 23 Feb 2023 06:47:21 +0000 (07:47 +0100)]
staging: rtl8192e: Replace macro RTL_PCI_DEVICE with PCI_DEVICE
[ Upstream commit
fda2093860df4812d69052a8cf4997e53853a340 ]
Replace macro RTL_PCI_DEVICE with PCI_DEVICE to get rid of rtl819xp_ops
which is empty.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/8b45ee783fa91196b7c9d6fc840a189496afd2f4.1677133271.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Max Chou [Tue, 18 Apr 2023 05:43:54 +0000 (13:43 +0800)]
Bluetooth: btrtl: Add the support for RTL8851B
[ Upstream commit
7948fe1c92d92313eea5453f83deb7f0141355e8 ]
Add the support for RTL8851B BT controller on USB interface.
The necessary firmware will be submitted to linux-firmware project.
Note that the Bluetooth devices WITH the VID=0x0bda would be set the
feature quirk in btrtl_setup_realtek(). It's able to ignore the
feature flag set for the specific VID and PID in blacklist_table[] of
btusb.c. (check [1])
If Realtek Bluetooth chips WITHOUT the VID=0x0bda, it shall be added
the feature flag for the specific VID and PID in blacklist_table[] of
btusb.c. (check [2])
[1] '
9ab9235fe5cf ("Bluetooth: btrtl: Enable WBS for the specific
Realtek devices")'
[2] '
73280f13c9bb ("Bluetooth: btusb: Add the more support IDs for
Realtek RTL8822CE")'
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 33 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=b851 Rev= 0.00
S: Manufacturer=Realtek
S: Product=802.11ax WLAN Adapter
S: SerialNumber=
00E04C885A01
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Min Li [Mon, 17 Apr 2023 02:27:54 +0000 (10:27 +0800)]
Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rsp
[ Upstream commit
25e97f7b1866e6b8503be349eeea44bb52d661ce ]
conn->chan_lock isn't acquired before l2cap_get_chan_by_scid,
if l2cap_get_chan_by_scid returns NULL, then 'bad unlock balance'
is triggered.
Reported-by: syzbot+9519d6b5b79cf7787cf3@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000894f5f05f95e9f4d@google.com/
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raul Cheleguini [Thu, 23 Mar 2023 13:45:39 +0000 (10:45 -0300)]
Bluetooth: Add new quirk for broken set random RPA timeout for ATS2851
[ Upstream commit
91b6d02ddcd113352bdd895990b252065c596de7 ]
The ATS2851 based controller advertises support for command "LE Set Random
Private Address Timeout" but does not actually implement it, impeding the
controller initialization.
Add the quirk HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT to unblock the controller
initialization.
< HCI Command: LE Set Resolvable Private... (0x08|0x002e) plen 2
Timeout: 900 seconds
> HCI Event: Command Status (0x0f) plen 4
LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 1
Status: Unknown HCI Command (0x01)
Co-developed-by: imoc <wzj9912@gmail.com>
Signed-off-by: imoc <wzj9912@gmail.com>
Signed-off-by: Raul Cheleguini <raul.cheleguini@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Fri, 31 Mar 2023 21:11:21 +0000 (23:11 +0200)]
Bluetooth: hci_bcm: Fall back to getting bdaddr from EFI if not set
[ Upstream commit
0d218c3642b9ccf71f44987cd03c19320f3bd918 ]
On some devices the BCM Bluetooth adapter does not have a valid bdaddr set.
btbcm.c currently sets HCI_QUIRK_INVALID_BDADDR to indicate when this is
the case. But this requires users to manual setup a btaddr, by doing e.g.:
btmgmt -i hci0 public-addr 'B0:F1:EC:82:1D:B3'
Which means that Bluetooth will not work out of the box on such devices.
To avoid this (where possible) hci_bcm sets: HCI_QUIRK_USE_BDADDR_PROPERTY
which tries to get the bdaddr from devicetree.
But this only works on devicetree platforms. On UEFI based platforms
there is a special Broadcom UEFI variable which when present contains
the devices bdaddr, just like how there is another UEFI variable which
contains wifi nvram contents including the wifi MAC address.
Add support for getting the bdaddr from this Broadcom UEFI variable,
so that Bluetooth will work OOTB for users on devices where this
UEFI variable is present.
This fixes Bluetooth not working on for example Asus T100HA 2-in-1s.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chethan T N [Tue, 21 Mar 2023 04:33:10 +0000 (10:03 +0530)]
Bluetooth: btintel: Add LE States quirk support
[ Upstream commit
77f542b10c535c9a93bf8afdd2665524935807c2 ]
Basically all Intel controllers support both Central/Peripheral
LE states.
This patch enables the LE States quirk by default on all
Solar and Magnertor Intel controllers.
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Max Chou [Tue, 21 Mar 2023 11:48:26 +0000 (19:48 +0800)]
Bluetooth: btrtl: check for NULL in btrtl_set_quirks()
[ Upstream commit
253cf30e8d3d001850a95c4729d668f916b037ab ]
The btrtl_set_quirks() has accessed btrtl_dev->ic_info->lmp_subver since
b8e482d02513. However, if installing a Realtek Bluetooth controller
without the driver supported, it will hit the NULL point accessed.
Add a check for NULL to avoid the Kernel Oops.
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raul Cheleguini [Fri, 10 Mar 2023 15:14:10 +0000 (15:14 +0000)]
Bluetooth: Improve support for Actions Semi ATS2851 based devices
[ Upstream commit
7c2b2d2d0cb658aa543e11e90ae95621d3cb5fe6 ]
Add two more quirks to resume the device initialization and basic
operation as the device seems not to support "Read Transmit Power"
and "Set Extended Scan Parameters".
< HCI Command: LE Read Transmit Power (0x08|0x004b) plen 0
> HCI Event: Command Status (0x0f) plen 4
LE Read Transmit Power (0x08|0x004b) ncmd 1
Status: Unknown HCI Command (0x01)
< HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8
Own address type: Random (0x01)
Filter policy: Accept all advertisement (0x00)
PHYs: 0x01
Entry 0: LE 1M
Type: Active (0x01)
Interval: 11.250 msec (0x0012)
Window: 11.250 msec (0x0012)
> HCI Event: Command Status (0x0f) plen 4
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Unknown HCI Command (0x01)
Signed-off-by: Raul Cheleguini <rcheleguini@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Khoruzhick [Tue, 7 Mar 2023 22:17:31 +0000 (23:17 +0100)]
Bluetooth: btrtl: add support for the RTL8723CS
[ Upstream commit
c0123cb6c4c7fc2a42ead6cd7d3e82b8e1c25c6f ]
The Realtek RTL8723CS is a SDIO WiFi chip. It also contains a Bluetooth
module which is connected via UART to the host.
It shares lmp subversion with 8703B, so Realtek's userspace
initialization tool (rtk_hciattach) differentiates varieties of RTL8723CS
(CG, VF, XX) with RTL8703B using vendor's command to read chip type.
Also this chip declares support for some features it doesn't support
so add a quirk to indicate that these features are broken.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Bastian Germann <bage@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Khoruzhick [Tue, 7 Mar 2023 22:17:30 +0000 (23:17 +0100)]
Bluetooth: Add new quirk for broken local ext features page 2
[ Upstream commit
8194f1ef5a815aea815a91daf2c721eab2674f1f ]
Some adapters (e.g. RTL8723CS) advertise that they have more than
2 pages for local ext features, but they don't support any features
declared in these pages. RTL8723CS reports max_page = 2 and declares
support for sync train and secure connection, but it responds with
either garbage or with error in status on corresponding commands.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Bastian Germann <bage@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Meng Tang [Tue, 28 Feb 2023 05:55:17 +0000 (13:55 +0800)]
Bluetooth: btusb: Add new PID/VID 04ca:3801 for MT7663
[ Upstream commit
13209415d0e88396d99d346b184864834d70d68a ]
This bluetooth device is found in a combo WLAN/BT card
for a MediaTek 7663.
Tested on Acer Aspire A315-24P Notebook
The device information:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3801 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=
000000000
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Simon Horman [Mon, 17 Apr 2023 15:10:45 +0000 (17:10 +0200)]
ipvs: Update width of source for ip_vs_sync_conn_options
[ Upstream commit
e3478c68f6704638d08f437cbc552ca5970c151a ]
In ip_vs_sync_conn_v0() copy is made to struct ip_vs_sync_conn_options.
That structure looks like this:
struct ip_vs_sync_conn_options {
struct ip_vs_seq in_seq;
struct ip_vs_seq out_seq;
};
The source of the copy is the in_seq field of struct ip_vs_conn. Whose
type is struct ip_vs_seq. Thus we can see that the source - is not as
wide as the amount of data copied, which is the width of struct
ip_vs_sync_conn_option.
The copy is safe because the next field in is another struct ip_vs_seq.
Make use of struct_group() to annotate this.
Flagged by gcc-13 as:
In file included from ./include/linux/string.h:254,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/timex.h:5,
from ./include/linux/timex.h:67,
from ./include/linux/time32.h:13,
from ./include/linux/time.h:60,
from ./include/linux/stat.h:19,
from ./include/linux/module.h:13,
from net/netfilter/ipvs/ip_vs_sync.c:38:
In function 'fortify_memcpy_chk',
inlined from 'ip_vs_sync_conn_v0' at net/netfilter/ipvs/ip_vs_sync.c:606:3:
./include/linux/fortify-string.h:529:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
529 | __read_overflow2_field(q_size_field, size);
|
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhong Jinghua [Mon, 6 Feb 2023 14:58:05 +0000 (22:58 +0800)]
nbd: fix incomplete validation of ioctl arg
[ Upstream commit
55793ea54d77719a071b1ccc05a05056e3b5e009 ]
We tested and found an alarm caused by nbd_ioctl arg without verification.
The UBSAN warning calltrace like below:
UBSAN: Undefined behaviour in fs/buffer.c:1709:35
signed integer overflow:
-
9223372036854775808 - 1 cannot be represented in type 'long long int'
CPU: 3 PID: 2523 Comm: syz-executor.0 Not tainted 4.19.90 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78
show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x170/0x1dc lib/dump_stack.c:118
ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161
handle_overflow+0x188/0x1dc lib/ubsan.c:192
__ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:206
__block_write_full_page+0x94c/0xa20 fs/buffer.c:1709
block_write_full_page+0x1f0/0x280 fs/buffer.c:2934
blkdev_writepage+0x34/0x40 fs/block_dev.c:607
__writepage+0x68/0xe8 mm/page-writeback.c:2305
write_cache_pages+0x44c/0xc70 mm/page-writeback.c:2240
generic_writepages+0xdc/0x148 mm/page-writeback.c:2329
blkdev_writepages+0x2c/0x38 fs/block_dev.c:2114
do_writepages+0xd4/0x250 mm/page-writeback.c:2344
The reason for triggering this warning is __block_write_full_page()
-> i_size_read(inode) - 1 overflow.
inode->i_size is assigned in __nbd_ioctl() -> nbd_set_size() -> bytesize.
We think it is necessary to limit the size of arg to prevent errors.
Moreover, __nbd_ioctl() -> nbd_add_socket(), arg will be cast to int.
Assuming the value of arg is 0x80000000000000001) (on a 64-bit machine),
it will become 1 after the coercion, which will return unexpected results.
Fix it by adding checks to prevent passing in too large numbers.
Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230206145805.2645671-1-zhongjinghua@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nagarajan Maran [Mon, 17 Apr 2023 10:35:02 +0000 (13:35 +0300)]
wifi: ath11k: Fix SKB corruption in REO destination ring
[ Upstream commit
f9fff67d2d7ca6fa8066132003a3deef654c55b1 ]
While running traffics for a long time, randomly an RX descriptor
filled with value "0" from REO destination ring is received.
This descriptor which is invalid causes the wrong SKB (SKB stored in
the IDR lookup with buffer id "0") to be fetched which in turn
causes SKB memory corruption issue and the same leads to crash
after some time.
Changed the start id for idr allocation to "1" and the buffer id "0"
is reserved for error validation. Introduced Sanity check to validate
the descriptor, before processing the SKB.
Crash Signature :
Unable to handle kernel paging request at virtual address
3f004900
PC points to "b15_dma_inv_range+0x30/0x50"
LR points to "dma_cache_maint_page+0x8c/0x128".
The Backtrace obtained is as follows:
[<
8031716c>] (b15_dma_inv_range) from [<
80313a4c>] (dma_cache_maint_page+0x8c/0x128)
[<
80313a4c>] (dma_cache_maint_page) from [<
80313b90>] (__dma_page_dev_to_cpu+0x28/0xcc)
[<
80313b90>] (__dma_page_dev_to_cpu) from [<
7fb5dd68>] (ath11k_dp_process_rx+0x1e8/0x4a4 [ath11k])
[<
7fb5dd68>] (ath11k_dp_process_rx [ath11k]) from [<
7fb53c20>] (ath11k_dp_service_srng+0xb0/0x2ac [ath11k])
[<
7fb53c20>] (ath11k_dp_service_srng [ath11k]) from [<
7f67bba4>] (ath11k_pci_ext_grp_napi_poll+0x1c/0x78 [ath11k_pci])
[<
7f67bba4>] (ath11k_pci_ext_grp_napi_poll [ath11k_pci]) from [<
807d5cf4>] (__napi_poll+0x28/0xb8)
[<
807d5cf4>] (__napi_poll) from [<
807d5f28>] (net_rx_action+0xf0/0x280)
[<
807d5f28>] (net_rx_action) from [<
80302148>] (__do_softirq+0xd0/0x280)
[<
80302148>] (__do_softirq) from [<
80320408>] (irq_exit+0x74/0xd4)
[<
80320408>] (irq_exit) from [<
803638a4>] (__handle_domain_irq+0x90/0xb4)
[<
803638a4>] (__handle_domain_irq) from [<
805bedec>] (gic_handle_irq+0x58/0x90)
[<
805bedec>] (gic_handle_irq) from [<
80301a78>] (__irq_svc+0x58/0x8c)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230403191533.28114-1-quic_nmaran@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-starfive.git / log