drm/amd/display: make enable link independent from verified link caps

[why]
Ideally link capability should be independent from the link
configuration that we decide to use in enable link. Otherwise if link
capability is changed after validation has completed, we could end up
enabling a link configuration with invalid configuration. This would
lead to over link bandwidth subscription or in the extreme case
causes us to enable HPO link to a DIO stream.

[how]
Add a new struct in pipe ctx called link config. This structure will
contain link configuration to enable a link. It will be populated
during map pool resources after we validate link bandwidth. Remove
the reference of verified link cap during enable link process and
use link config in pipe ctx instead.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ignore First MST Sideband Message Return Error

[why]
First MST sideband message returns AUX_RET_ERROR_HPD_DISCON
on certain intel platform. Aux transaction considered failure
if HPD unexpected pulled low. The actual aux transaction success
in such case, hence do not return error.

[how]
Not returning error when AUX_RET_ERROR_HPD_DISCON detected
on the first sideband message.

v2: squash in additional DMI entries
v3: squash in static fix

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: bump KFD version for unified ctx save/restore memory

To expose unified memory for ctx save/resotre area feature
availablity to libhsakmt.

Proposed userspace:
https://patchwork.freedesktop.org/series/106218/

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix unnecessary pipe split playing NV12 1080p MPO video

[Why]
When playing NV12 1080p MPO video, it is pipe splitting so
we see two pipes in fullscreen and four pipes in windowed
mode. Pipe split is happening because we are setting
MaximumMPCCombine = 1

[How]
Algorithm for MaximumMPCCombine has extra conditions we do
not need.  Use DCN31 algorithm instead

Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix black screen when disabling Freesync in OSD

[Why]
Black screen encountered when disabling Freesync through OSD on some
displays.

[How]
Set the should_disable flag when new top pipe has no plane state to
ensure that pipes get cleaned up.

Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable PSRSU when DSC enabled on the specific sink

[Why]
Some specific sink is not able to support PSRSU when DSC is turned on.
For this case, fall-back to use PSR1.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clear edid when unplug mst connector

[Why]
When unplug one sst monitor from a mst hub and plug in the same
port with another sst monitor, we don't read the corresponding
edid. That's because we detect there is already an edid stored in
aconnector->edid which is a stale one.

[How]
Clean up aconnector->edid when unplug mst connector.

Reviewed-by: Hersen Wu <hersen.wu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix windowed MPO video with ODM combine for DCN32

[Why]
In single display configuration, windowed MPO does not work
 with ODM combine.

[How]
For ODM + MPO window on one half of ODM, only 3 pipes should
 be allocated and scaling parameters adjusted to handle this case.
 Otherwise, we use 4 pipes.
Move copy_surface_update_to_plane() before dc_add_plane_to_context()
 so that it gets the updated rect information when setting up
 the pipes.
Add dc_check_boundary_crossing_for_windowed_mpo_with_odm() to force
 a full update when we cross a boundary requiring us to reconfigure
 the number of pipes between 3 and 4 pipes.
Set config.enable_windowed_mpo_odm to true when we have the
 debug.enable_single_display_2to1_odm_policy set to true.
Don't fail validating ODM with windowed MPO if
 config.enable_windowed_mpo_odm is true.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Removing assert statements for Linux

[WHY]
Assert statements causing several bugs on Linux DM

[HOW]
Removing assert statement for Linux DM
(ASSERT(result == VBIOSSMC_Result_OK)). Also adding
logging statements for setting dcfclk.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216092
Fixes: c1b972a18d05 ("drm/amd/display: Insert pulling smu busy status before sending another request")
Reviewed-by: Gabe Teeger <Gabe.Teeger@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Helper function for ALPM initialization

[WHY]
Needed a helper function for ALPM DPCD initialization

[HOW]
Refactoring to put ALPM initialization in a helper function

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Muhammad Ansari <muansari@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check for DP2.0 when checking ODM combine

[WHY]
Certain DP 2.0 modes may fail validation if DP 2.0 is not considered for
ODM combine.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Exit SubVP if MPO in use

[Description]
Exit SubVP if MPO is in use since SubVP + MPO together is not supported.
- Don't add SubVP at validation time if we see MPO is in use

Issues fixed in the SubVP / MPO transition:
1. Enable phantom pipes in post unlock function to prevent underflow
when an active pipe is being transitioned to be a phantom pipe (VTG
updates take place right away). Also must wait for VUPDATE of the main
pipe to complete first

2. Don't wait for MPCC idle when transitioning a phantom pipe to an
actual pipe. MPCC_STATUS is never asserted due to OTG being off for
phantom pipes

3. When transitioning an active pipe to phantom, program DET right away
(same as disabling the pipe) or the DET update will only take when
the phantom pipe is enabled which can cause DET allocation errors.

4. For K1/K2 programming of phantom pipes, use same settings as the
main pipe. Also don't program K1 / K2 = 0xF ever since the field is only
1 / 2 bits wide.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: set correct mes ring ready flag

Set corresponding ready flag for mes ring when enable or disable
mes ring.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove one duplicated ef removal

That has been done in BO release notify.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc10: adjust gart size for parts that support S/G display

For GMC 10 parts which support scatter/gather display (display
from system memory), we should allocate a larger gart size
to better handler larger displays.  This mirrors what we already
do for GMC 9 parts.

v2: fix typo (Alex)

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: fix bo va unmap issue in mes

Need reserve buffers before unmap mes ctx bo va.

v2: fix removal of dma_resv_excl_fence() (Alex)
v3: fix dma_resv_usage (Alex)

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: fix mes submission in atomic context

For some cases (accessing registers, unmap legacy queue), it needs
access mes in atomic context. Use spinlock to protect agaist mes
ring buffer race condition.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop the thermal_controller_type check

drop the thermal_controller_type check since it's not relevant.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: ac/dc change for smu_v13_0

fixed the issue: gpu runs in dc mode but it is expected to be in ac mode.
this causes the lower performance on smu_v13_0

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable ODM combine default policy

[Why&How]
Output Data Mapping is a power saving feature that allows us to run at
reduced DPP and DISP clocks compared to what could be achieved with a
single pipe.

Set the default policy for single display use case to use 2 to 1 ODM combine.
The options are queried by DC and appropriate register programming sequence
is initiated to enable this feature.

Fixes: 235c67634230 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add callback to set dig mode

[Why&How]
Add a missing callback to set DIG FIFO output pixel mode. This is used
when ODM combine is activated.

Fixes: 235c67634230 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix 32 bit compilation errors in dc_dmub_srv.c

There are several things wrong here.  First, none of these
numbers are FP, so there is no need to cast to double.  Next
make sure to use proper 64 bit division helpers.

Fixes: 85f4bc0c333c ("drm/amd/display: Add SubVP required code")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indenting

Eliminate the follow smatch warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:405 get_bios_object_from_path_v3() warn: inconsistent indenting
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:611 bios_parser_get_hpd_info() warn: inconsistent indenting
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:818 bios_parser_get_device_tag() warn: inconsistent indenting
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:1599 bios_parser_is_device_id_supported() warn: inconsistent indenting

Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix non-x86/PPC64 compilation

Need to protect FP DMCUB code with CONFIG_DRM_AMD_DC_DCN.
Fixes build failures like the following on arm64:
ERROR: modpost: "__floatunsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "__divdf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "fma" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "__adddf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "__fixdfsi" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "__muldf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "__floatsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost: "__fixunsdfsi" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!

Fixes: 85f4bc0c333c ("drm/amd/display: Add SubVP required code")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix new dmub notification enabling in DM

[Why]
Changes from "Fix for dmub outbox notification enable" need to land
in DM or DMUB outbox notification would be disabled.

[How]
Enable outbox notification only after interrupt are enabled and IRQ
handlers registered. Any pending notification will be sent by DMUB
once outbox notification is enabled.

Fixes: ed7208706448 ("drm/amd/display: Fix for dmub outbox notification enable")
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix one list corruption when create queue fails

Queue would be freed when create_queue_cpsch fails
So lets do queue cleanup otherwise various list and memory issues
happen.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: avoid bogus "vram limit (0) must be a power of 2" warning

I was getting the following message on boot on Linux 5.19-rc5:
        radeon 0000:01:05.0: vram limit (0) must be a power of 2
(I didn't use any radeon.vramlimit commandline parameter).

This is caused by
commit 8c2d34eb53b9 ("drm/radeon: use kernel is_power_of_2 rather than local version")
which removed radeon_check_pot_argument() and converted its users to
is_power_of_2(). The two functions differ in its handling of 0, which is
the default value of radeon_vram_limit: radeon_check_pot_argument()
"incorrectly" considered it a power of 2, while is_power_of_2() does not.

An appropriate conditional silences the warning message.

It is not necessary to add a similar test to other callers of
is_power_of_2() in radeon_device.c. The matching commit in amdgpu:
commit 761175078466 ("drm/amdgpu: use kernel is_power_of_2 rather than local version")
is unaffected by this bug.

Tested on Radeon HD 3200.

Not ccing stable, this is not serious enough.

Fixes: 8c2d34eb53b9 ("drm/radeon: use kernel is_power_of_2 rather than local version")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove repeated includes

Remove a repeated "#include <drm/drm_print.h>"

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: Remove duplicated argument to ||

Remove duplicated argument to ||

Signed-off-by: Zhongjun Tan <tanzhongjun@coolpad.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make get_refresh_rate() static

It's not used outside of dcn30_resource.c.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove set but unused variable

Fixes the following:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hwseq.c:428:33: warning: variable 'old_pipe' set but not used

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: optimize svm range evict

It is to avoid unnecessary queue eviction when range
is not mapped to gpu.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: correct idle_power_optimizations disablement return value

[Why]
The return value indicates whether the operation(disable/enable) succeeded
or not. The existing logic reports wrong result even if the disablement was
performed successfully. That will make succeeding reenablement abandoned
as dc->idle_optimizations_allowed is always true.

[How]
Correct the return value to reflect the real result of disablement.

Fixes: 235c67634230 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove stale debug setting

[Why&How]
The debug option to disable idle power optimization can be dropped

Fixes: 235c67634230 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: change svm range evict

Adding always evict queues when flag is set to
KFD_IOCTL_SVM_FLAG_GPU_ALWAYS_MAPPED as if XNACK off.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add new flag for svm

It is to add new option for always keeping gpu mapping.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: disable prefer_shadow for generic fb helpers

Seems to break hibernation.  Disable for now until we can root
cause it.

Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216119
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: keep fbdev buffers pinned during suspend

Was dropped when we converted to the generic helpers.

Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused variables from vba_vars_st

Some variables from the struct vba_vars_st are not referenced in any
other place on the codebase. As they are not used, this commit removes
those variables.

Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove duplicate code across dcn30 and dcn31

The function CalculateBytePerPixelAnd256BBlockSizes was defined four
times: on display_mode_vba_30.c, display_rq_dlg_calc_30.c,
display_mode_vba_31.c and display_rq_dlg_calc_31.c. In order to avoid
code duplication, the CalculateBytePerPixelAnd256BBlockSizes is defined
on display_mode_vba_30.h and used across dcn30 and dcn31.

Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indenting

Eliminate the follow smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3151 commit_planes_for_stream() warn: inconsistent indenting

Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove return value of Calculate256BBlockSizes

The function Calculate256BBlockSizes always returns true, regardless of
the parameters. As any file checks the return of the function, this
commit changes the return value to void.

Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdpgu/debugfs: Simplify some exit paths

To avoid code repetition, unify the function exit path when possible. No
functional changes.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: Fix an error handling path in amdgpu_mes_self_test()

if amdgpu_mes_ctx_alloc_meta_data() fails, we should call amdgpu_vm_fini()
to handle amdgpu_vm_init().

Add a new lable before amdgpu_vm_init() and goto this lable when
amdgpu_mes_ctx_alloc_meta_data() fails.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Maintain old audio programming sequence

[Description]
Program audio DTO before wall dto for audio

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.192

This DC patchset brings improvements in multiple areas. In summary, we
highlight:

- Program ACP-related registers
- Fixes for DMUB, DPIA, PSR, and others
- Improvements in the pipe split
- Add SubVP code
- Add basic setup for FAMS support
- Improve BB capabilities

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename hdmi_frl_pcon_support

hdmi_frl_pcon_support has been the source of confusion. So, rename it to
dp_hdmi21_pcon_support.

Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable PCON SST support for newer ASICs

Generic PCON SST support already exists and works for newer ASICs. So,
enable it by default.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: OVT Update on InfoFrame and Mode Management

[Why]
Integrate OVT timing from DM to DC logic to update info frame
and mode management to report the resolution to the OS.

[How]
Reflect RID and Frame Rate to AVI InfoFrame Version 5.
Define new Timing Standard for OVT timing.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes11: fix to unmap legacy queue

MES fw updated to support unmapping legacy gfx/compute queue.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Initialize lt_settings on instantiation

[WHY]
lt_settings' pointers remain uninitialized but nonzero if display fails
to light up with no DPCD/EDID info populated, leading to a hang on access

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix uninitialized variable.

[Why]
Uninitialized variable causes diag compilation build failure.

[How]
- Ensure that variable in question is always initialized before being
used.
- The variable in question is the USB4 DP training pattern. In case an
unsupported training pattern has been requested, update status
accordingly and abort current link training attempt.

Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move all linux includes into OS types

Move all linux includes into OS types.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix null timing generator resource

[Why]
For some customer blending transition cases, the
available pipe for second stream is a pipe index that is
greater than the number of timing generators, which
can cause a problem in acquire_first_free_pipe since it
assumes same index for pipe and timing generator

[How]
Added logic to use last timing generator index
if the pipe index is greater than number of timing generators.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add flag to modify MST delay

[Why]
Some panels may require more MST delay on discovery

[How]
Add panel patch and debug mst delay flag

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable TBT3 DSC work around by default.

[Why]
Some TBT3 docks have DPOAs which report USB4 capability and are expected
to support USB4 DPOA features such as FEC/DSC.

[How]
By default, do not override FEC/DSC capabilities reported by TBT3 docks.

Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix refresh rate issue on Club 3D

Recently we introduced a patch for fixing an MST issue, but it caused a
regression on Club 3D since we could not set a refresh rate higher than
60Hz. This commit fixes this issue by adding a proper check after
validating the stream.

Fixes: f04d275d94e164 ("drm/amd/display: add mst port output bw check")
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove configuration option for dpia hpd delay

[Why]
DC debug option to configure dpia hpd processing delay is not required.

[How]
Remove dc debug option for dpia hpd delay and also added log for
querying dpia hpd state.

Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Indicate stream change on ODM change

[Why]
With ODM policy 2 to 1, there exists a new use case
scenario where stream content is unchanged, but ODM
may be used.  When this happens, the stream needs
to be committed with a new pipe setting.
This did not happen due to stream change
detection logic not accounting for ODM.

[How]
Set ODM flag in stream and commit stream when change
in ODM has been detected due to policy change.

Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable otg toggle w/a on boot

This w/a has a bad interaction with seamless boot toggling an
active stream. Most panels recover, however some fail leading
to display corruption.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix dmub soft hang for PSR 1

[Why]
Unexpected change of aux hw mapping causes dmub soft hang when
initiate aux transation at wrong aux channel.

ddc_channel stands for hw dp aux index which is from vbios,
but link_index is pure software concept for link count depending on which link
is probed first. They are not interchangeable.

dmub aux transaction could pass if happens eDP link_index gets
the same value as vbios ddc_channel, e.g., ddc_channel = 1, link_index = 1
if they gets different, e.g., ddc_channel = 2, link_index = 0, overwrite
ddc_channel with link_index will have wrong ddc channel being used for aux
transaction in dmub PSR, cause aux transaction soft hang.

[How]
ddc_channel mapping to each link is determined by vbios and further
parsed in dc. Such info. should not be touched in any kind, otherwise
the mapping is screwed up leading to aux transaction timeout.

Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Guard against NULL link encoder in log hw state

[Why & How]
Check lenc is not NULL since dynamic link encoder assignment could
end up assigning a NULL link encoder.

Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove incorrect ASSERT check for link_enc

[Why]
It's possible that we don't have a link encoder assignment if the
context is NULL but we're calling dc_add_stream_to_ctx from DM directly.

Link encoder assignment will happen later after global validation
runs with fast_validate = false.

[How]
Remove the ASSERTION. We already guard against NULL link_enc.

Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Guard against ddc_pin being NULL for AUX

[Why]
In the case where we don't support DMUB aux but we have DPIA links
in the configuration we might try to message AUX using the legacy
path - where DDC pin is NULL. This causes a NULL pointer dereference.

[How]
Guard against NULL DDC pin, return a failure for aux engine acquire.

Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Program ACP related register

- Setup the shift and mask of HDMI_ACP_SEND register
- Program the register in hdmi stream encoder
- Also update ACP register in azalia configuration

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add an option to skip wait for HPD when powering on eDP panel

[HOW/WHY]
Add an option to skip edp_wait_for_hpd_ready when necessary

Reviewed-by: Jayendran Ramani <Jayendran.Ramani@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't set dram clock change requirement for SubVP

[Description]
In general cases we want to keep the dram clock change requirement (we
prefer configs that support MCLK switch). Only override to false for
SubVP.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Extend soc BB capabilitiy

[why]
Some parts are consuming dangerously close to maximum number of states
supported when updating the BB (i.e. 8).

[how]
Change maximum stages from 9 to 20.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Maintain consistent mode of operation during encoder assignment

[Why]
While applying a state to hardware, there is a transition period where
the back-end is reset using the old state; then enabled using the new
state.

Generally, the link encoder configuration module queries
stream-to-encoder assignments in either the new or old state based on a
mode variable. During the transition there is a need to query both
states, however toggling this mode variable can lead to incorrect
programming of encoders.

[How]
- Add new function to explicity query stream-to-encoder assignment
in the current state rather than intermittently switch the mode
of operation of the link encoder assignment module.
- Add additional checks for encoder assignment defects.
- Explicitly reset the mode of operation if application of state
to hardware ends prematurely.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: guard for virtual calling destroy_link_encoders

[Why]:
On power down, virtual dal may try to delete link_encoders by
referencing uninitialized res_pool.

[How]:
Added guard against empty res_pool.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable timing sync b/w odm halves

Fix for a bug where we would try to timing sync 2 odm halves.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add minimal pipe split transition state

[WHY?]
When adding/removing a plane to some configurations, unsupported pipe
programming can occur when moving to a new plane.  Such cases include pipe
split on multi-display, with MPO, and/or ODM.

[HOW?]
Add a safe transistion state that minimizes pipe usage before programming
new configuration. When adding a plane, the current state has the least
pipes required so it is applied without splitting.  This must be applied
prior to updating the plane_state for seamless transition.  When removing a
plane, the new state has the least pieps required so it is applied without
splitting.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add SubVP control lock

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix stream->link_enc unassigned during stream removal

[Why]
Found when running igt@kms_atomic.

Userspace attempts to do a TEST_COMMIT when 0 streams which calls
dc_remove_stream_from_ctx. This in turn calls link_enc_unassign which
ends up modifying stream->link = NULL directly, causing the global
link_enc to be removed preventing further link activity and future link
validation from passing.

[How]
We take care of link_enc unassignment at the start of
link_enc_cfg_link_encs_assign so this call is no longer necessary.

Fixes global state from being modified while unlocked.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add basic infrastructure for enabling FAMS

We want to enable Firmware Assisted Memory (FAMS) Switching, but first,
we need to add the required code infrastructure in DC before allowing it
in amdgpu_dm.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Make OPTC3 function accessible to other DCN

[Why]
Newer DCN should use optc3

[How]
Declare optc3 vmin/vmax function in header.

Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update gpuvm_max_page_table_levels IP param

After some experimental tests, we noticed that we need to set
gpuvm_max_page_table_levels to '4' to meet the hardware requirements.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Switch to correct DTO on HDMI

[Why]
For Pixel Rate control, when on HDMI, HDMI DTO should be selected
instead of DP DTO.

[How]
Pass HDMI parameter for HDMI stream, and select correct DTO.

Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Change DET policy for MPO cases

For MPO we want to allocate less than maximum DET for MPO pipes because
we need enogh buffer to move DET back to other pipes when removing an
MPO plane. Also update regular DET allocation to use DET override (DCN32
has an internal policy which driver does not want to use)

Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use two pixel per container for k1/k2 div

Currently, we check if pixel_encoding is equal to
PIXEL_ENCODING_YCBCR422 to get the k1/k2 div parameters. This commit
changes this logic slightly by checking if two pixels per container are
used.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Apply ODM 2:1 policy for single display configuration

[Why]
Most of the time, a single display uses the ODM combine. When using
multi-display, we use ODM combine only if it is necessary. These cases
are not flexible enough for us, and we can improve them to take
advantage of our hardware. We want to have more control over the ODM
policy.

[How]
This commit add a new debug flag named
enable_single_display_2to1_odm_policy to control the ODM policy and
another flag named enable_dp_dig_pixel_rate_div_policy to fine control
the ODM combine. This is possible by adding a new "pipe.dest" parameter
that can be set to ODM 2:1 combined if we use a single display. For
dynamic ODM combine, when using DP-DIG, DCN applies K2=2 settings for
ODM combine. Note that this feature affects the following registers:

- timing.pix_clk_100khz -> DP_VID_M, DP_VID_N
- requested_pix_clk_100hz -> DP_DTOn_PHASE
- OTGn_PIXEL_RATE_DIVK2
- DP_PIXEL_PER_CYCLE_PROCESSING_MODE
- DIG_FIFO_OUTPUT_PIXEL_MODE
- DP_VID_N_MUL

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add function to set pixels per cycle

Add function to set pixels per cycle in DIG stream encoder

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Prepare for new interfaces

[WHY]:
Lut pipeline will be hooked up differently in some asics
need to add new interfaces and missing registers.

[HOW]:
Add missing registers and hook up programming from DPP for pre-blend
lut.

Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add SubVP required code

This commit enables the SubVP feature. To achieve that, we need to:

- Don't force p-state disallow on SubVP (can't block dummy p-state)
- Send calculated watermark to DMCUB for SubVP
- Adjust CAB mode message to PMFW
- Add a proper locking sequence for SubVP
- Various fixes to SubVP static analysis and determining SubVP config
- Currently SubVP not supported with pipe split so merge all pipes
  before setting up SubVp

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing registers for ACP

We are missing some ACP registers/mask value for some specific ASICs.
This commit includes it to those ASICs that support it.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip whole ras bad page framework on sriov

It should not init whole ras bad page framework on sriov guest side
due to it is handled on host side.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Only send ras feature for gfx block

GFX is the only IP block that RAS TA needs to program
the hardware when receiving enable_feature command.

Changed from V1:
    remove amdgpu_ras_need_send_ras_feature inline function,
    use GFX RAS block check directly.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update SMU 13.0.0 driver_if header

And bump the version to 0x2A.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: simplify vm_validate_pt_pd_bos

We don't need to validate and map root PD specially here,
it would be validated and mapped by amdgpu_vm_validate_pt_bos
if it is evicted.

The special case is when turning a GFX VM to a compute VM,
if vm_update_mode changed, we should make sure root PD gets
mapped. So just map root PD after updating vm->update_funcs
in amdgpu_vm_make_compute whether the vm_update_mode changed
or not.

v3:
 - Add some comments suggested by Christian.

v2:
 - Don't rename vm_validate_pt_pd_bos and make it public.

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Add debug mask for subviewport mclk switch

[Why&How]
Expose a new dc debug mask enum to force a subviewport memory clock switch
to facilitate easy testing.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: add missing FP_START/END checks dcn32_clk_mgr.c

Properly handle FP code in dcn32_clk_mgr.c.

Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix __nedf2 undefined for 32 bit compilation

When we tried to compile DCN32/321 for 32-bit architecture, we got this
error message:

ERROR: modpost: "__nedf2" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!

This commit fixes this issue by rewriting a small part of the
dcn32_build_wm_range_table.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix __muldf3 undefined for 32 bit compilation

Sometimes when trying to enable some feature, we have to define some
values with educated guesses, but we mark those values as TBD, which
means "To Be Determined". However, the correct way to approach it is by
loading that information from the firmware. Anyway, some of the values
that we were experimenting with caused this issue:

ERROR: modpost: "__muldf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!

This commit fixes this issue by removing the division by two since it is
harmless in this case.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix __floatunsidf undefined for 32 bit compilation

When we tried to compile DCN32/321 for 32-bit architecture, we got this
error message:

ERROR: modpost: "__floatunsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!

This was caused because we were trying to assign an unsigned int to a
double value which causes issues for 32-bit architecture. This issue can
be fixed by changing the value type.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix __umoddi3 undefined for 32 bit compilation

While we tried to build amdgpu on i386, we got this error:

ERROR: modpost: "__umoddi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!

This commit fixes this issue by replacing the standard module operator
with div_u64_rem.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: d3dfceb58de5 ("drm/amd/display: Add dependant changes for DCN32/321")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Bump KFD API version for SMI profiling event

Indicate SMI profiling events available.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Asynchronously free smi_client

The synchronize_rcu may take several ms, which noticeably slows down
applications close SMI event handle. Use call_rcu to free client->fifo
and client asynchronously and eliminate the synchronize_rcu call in the
user thread.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add unmap from GPU SMI event

SVM range unmapped from GPUs when range is unmapped from CPU, or with
xnack on from MMU notifier when range is evicted or migrated.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add user queue eviction restore SMI event

Output user queue eviction and restore event. User queue eviction may be
triggered by svm or userptr MMU notifier, TTM eviction, device suspend
and CRIU checkpoint and restore.

User queue restore may be rescheduled if eviction happens again while
restore.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add migration SMI event

For migration start and end event, output timestamp when migration
starts, ends, svm range address and size, GPU id of migration source and
destination and svm range attributes,

Migration trigger could be prefetch, CPU or GPU page fault and TTM
eviction.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>