CIFS: Fix use after free of file info structures

commit 1a67c415965752879e2e9fad407bc44fc7f25f23 upstream.

Currently the code assumes that if a file info entry belongs
to lists of open file handles of an inode and a tcon then
it has non-zero reference. The recent changes broke that
assumption when putting the last reference of the file info.
There may be a situation when a file is being deleted but
nothing prevents another thread to reference it again
and start using it. This happens because we do not hold
the inode list lock while checking the number of references
of the file info structure. Fix this by doing the proper
locking when doing the check.

Fixes: 487317c99477d ("cifs: add spinlock for the openFileList to cifsInodeInfo")
Fixes: cb248819d209d ("cifs: use cifsInodeInfo->open_file_lock while iterating to avoid a panic")
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: avoid using MID 0xFFFF

commit 03d9a9fe3f3aec508e485dd3dcfa1e99933b4bdb upstream.

According to MS-CIFS specification MID 0xFFFF should not be used by the
CIFS client, but we actually do. Besides, this has proven to cause races
leading to oops between SendReceive2/cifs_demultiplex_thread. On SMB1,
MID is a 2 byte value easy to reach in CurrentMid which may conflict with
an oplock break notification request coming from server

Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT

commit 93916beb70143c46bf1d2bacf814be3a124b253b upstream.

It appears that the only case where we need to apply the TX2_219_TVM
mitigation is when the core is in SMT mode. So let's condition the
enabling on detecting a CPU whose MPIDR_EL1.Aff0 is non-zero.

Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC/ghes: Fix Use after free in ghes_edac remove path

commit 1e72e673b9d102ff2e8333e74b3308d012ddf75b upstream.

ghes_edac models a single logical memory controller, and uses a global
ghes_init variable to ensure only the first ghes_edac_register() will
do anything.

ghes_edac is registered the first time a GHES entry in the HEST is
probed. There may be multiple entries, so subsequent attempts to
register ghes_edac are silently ignored as the work has already been
done.

When a GHES entry is unregistered, it calls ghes_edac_unregister(),
which free()s the memory behind the global variables in ghes_edac.

But there may be multiple GHES entries, the next call to
ghes_edac_unregister() will dereference the free()d memory, and attempt
to free it a second time.

This may also be triggered on a platform with one GHES entry, if the
driver is unbound/re-bound and unbound. The re-bind step will do
nothing because of ghes_init, the second unbind will then do the same
work as the first.

Doing the unregister work on the first call is unsafe, as another
CPU may be processing a notification in ghes_edac_report_mem_error(),
using the memory we are about to free.

ghes_init is already half of the reference counting. We only need
to do the register work for the first call, and the unregister work
for the last. Add the unregister check.

This means we no longer free ghes_edac's memory while there are
GHES entries that may receive a notification.

This was detected by KASAN and DEBUG_TEST_DRIVER_REMOVE.

 [ bp: merge into a single patch. ]

Fixes: 0fe5f281f749 ("EDAC, ghes: Model a single, logical memory controller")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Robert Richter <rrichter@marvell.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20191014171919.85044-2-james.morse@arm.com
Link: https://lkml.kernel.org/r/304df85b-8b56-b77e-1a11-aa23769f2e7c@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix vmap memory leak in ioremap()/iounmap()

commit 513f7f747e1cba81f28a436911fba0b485878ebd upstream.

Sven noticed that calling ioremap() and iounmap() multiple times leads
to a vmap memory leak:
vmap allocation for size 4198400 failed:
use vmalloc=<size> to increase size

It seems we missed calling vunmap() in iounmap().

Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: drop EXPORT_SYMBOL for outs*/ins*

commit 8b39da985194aac2998dd9e3a22d00b596cebf1e upstream.

Custom outs*/ins* implementations are long gone from the xtensa port,
remove matching EXPORT_SYMBOLs.
This fixes the following build warnings issued by modpost since commit
15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions"):

  WARNING: "insb" [vmlinux] is a static EXPORT_SYMBOL
  WARNING: "insw" [vmlinux] is a static EXPORT_SYMBOL
  WARNING: "insl" [vmlinux] is a static EXPORT_SYMBOL
  WARNING: "outsb" [vmlinux] is a static EXPORT_SYMBOL
  WARNING: "outsw" [vmlinux] is a static EXPORT_SYMBOL
  WARNING: "outsl" [vmlinux] is a static EXPORT_SYMBOL

Cc: stable@vger.kernel.org
Fixes: d38efc1f150f ("xtensa: adopt generic io routines")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory-failure: poison read receives SIGKILL instead of SIGBUS if mmaped more than once

commit 3d7fed4ad8ccb691d217efbb0f934e6a4df5ef91 upstream.

Mmap /dev/dax more than once, then read the poison location using
address from one of the mappings.  The other mappings due to not having
the page mapped in will cause SIGKILLs delivered to the process.
SIGKILL succeeds over SIGBUS, so user process loses the opportunity to
handle the UE.

Although one may add MAP_POPULATE to mmap(2) to work around the issue,
MAP_POPULATE makes mapping 128GB of pmem several magnitudes slower, so
isn't always an option.

Details -

  ndctl inject-error --block=10 --count=1 namespace6.0

  ./read_poison -x dax6.0 -o 5120 -m 2
  mmaped address 0x7f5bb6600000
  mmaped address 0x7f3cf3600000
  doing local read at address 0x7f3cf3601400
  Killed

Console messages in instrumented kernel -

  mce: Uncorrected hardware memory error in user-access at edbe201400
  Memory failure: tk->addr = 7f5bb6601000
  Memory failure: address edbe201: call dev_pagemap_mapping_shift
  dev_pagemap_mapping_shift: page edbe201: no PUD
  Memory failure: tk->size_shift == 0
  Memory failure: Unable to find user space address edbe201 in read_poison
  Memory failure: tk->addr = 7f3cf3601000
  Memory failure: address edbe201: call dev_pagemap_mapping_shift
  Memory failure: tk->size_shift = 21
  Memory failure: 0xedbe201: forcibly killing read_poison:22434 because of failure to unmap corrupted page
    => to deliver SIGKILL
  Memory failure: 0xedbe201: Killing read_poison:22434 due to hardware memory corruption
    => to deliver SIGBUS

Link: http://lkml.kernel.org/r/1565112345-28754-3-git-send-email-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Suggested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic()

commit f231fe4235e22e18d847e05cbe705deaca56580a upstream.

Uninitialized memmaps contain garbage and in the worst case trigger
kernel BUGs, especially with CONFIG_PAGE_POISONING.  They should not get
touched.

Let's make sure that we only consider online memory (managed by the
buddy) that has initialized memmaps.  ZONE_DEVICE is not applicable.

page_zone() will call page_to_nid(), which will trigger
VM_BUG_ON_PGFLAGS(PagePoisoned(page), page) with CONFIG_PAGE_POISONING
and CONFIG_DEBUG_VM_PGFLAGS when called on uninitialized memmaps.  This
can be the case when an offline memory block (e.g., never onlined) is
spanned by a zone.

Note: As explained by Michal in [1], alloc_contig_range() will verify
the range.  So it boils down to the wrong access in this function.

[1] http://lkml.kernel.org/r/20180423000943.GO17484@dhcp22.suse.cz

Link: http://lkml.kernel.org/r/20191015120717.4858-1-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_owner: don't access uninitialized memmaps when reading /proc/pagetypeinfo

commit a26ee565b6cd8dc2bf15ff6aa70bbb28f928b773 upstream.

Uninitialized memmaps contain garbage and in the worst case trigger
kernel BUGs, especially with CONFIG_PAGE_POISONING.  They should not get
touched.

For example, when not onlining a memory block that is spanned by a zone
and reading /proc/pagetypeinfo with CONFIG_DEBUG_VM_PGFLAGS and
CONFIG_PAGE_POISONING, we can trigger a kernel BUG:

  :/# echo 1 > /sys/devices/system/memory/memory40/online
  :/# echo 1 > /sys/devices/system/memory/memory42/online
  :/# cat /proc/pagetypeinfo > test.file
   page:fffff2c585200000 is uninitialized and poisoned
   raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
   raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
   page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
   There is not page extension available.
   ------------[ cut here ]------------
   kernel BUG at include/linux/mm.h:1107!
   invalid opcode: 0000 [#1] SMP NOPTI

Please note that this change does not affect ZONE_DEVICE, because
pagetypeinfo_showmixedcount_print() is called from
mm/vmstat.c:pagetypeinfo_showmixedcount() only for populated zones, and
ZONE_DEVICE is never populated (zone->present_pages always 0).

[david@redhat.com: move check to outer loop, add comment, rephrase description]
Link: http://lkml.kernel.org/r/20191011140638.8160-1-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visible after d0dc12e86b319
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/slub: fix a deadlock in show_slab_objects()

commit e4f8e513c3d353c134ad4eef9fd0bba12406c7c8 upstream.

A long time ago we fixed a similar deadlock in show_slab_objects() [1].
However, it is apparently due to the commits like 01fb58bcba63 ("slab:
remove synchronous synchronize_sched() from memcg cache deactivation
path") and 03afc0e25f7f ("slab: get_online_mems for
kmem_cache_{create,destroy,shrink}"), this kind of deadlock is back by
just reading files in /sys/kernel/slab which will generate a lockdep
splat below.

Since the "mem_hotplug_lock" here is only to obtain a stable online node
mask while racing with NUMA node hotplug, in the worst case, the results
may me miscalculated while doing NUMA node hotplug, but they shall be
corrected by later reads of the same files.

  WARNING: possible circular locking dependency detected
  ------------------------------------------------------
  cat/5224 is trying to acquire lock:
  ffff900012ac3120 (mem_hotplug_lock.rw_sem){++++}, at:
  show_slab_objects+0x94/0x3a8

  but task is already holding lock:
  b8ff009693eee398 (kn->count#45){++++}, at: kernfs_seq_start+0x44/0xf0

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #2 (kn->count#45){++++}:
         lock_acquire+0x31c/0x360
         __kernfs_remove+0x290/0x490
         kernfs_remove+0x30/0x44
         sysfs_remove_dir+0x70/0x88
         kobject_del+0x50/0xb0
         sysfs_slab_unlink+0x2c/0x38
         shutdown_cache+0xa0/0xf0
         kmemcg_cache_shutdown_fn+0x1c/0x34
         kmemcg_workfn+0x44/0x64
         process_one_work+0x4f4/0x950
         worker_thread+0x390/0x4bc
         kthread+0x1cc/0x1e8
         ret_from_fork+0x10/0x18

  -> #1 (slab_mutex){+.+.}:
         lock_acquire+0x31c/0x360
         __mutex_lock_common+0x16c/0xf78
         mutex_lock_nested+0x40/0x50
         memcg_create_kmem_cache+0x38/0x16c
         memcg_kmem_cache_create_func+0x3c/0x70
         process_one_work+0x4f4/0x950
         worker_thread+0x390/0x4bc
         kthread+0x1cc/0x1e8
         ret_from_fork+0x10/0x18

  -> #0 (mem_hotplug_lock.rw_sem){++++}:
         validate_chain+0xd10/0x2bcc
         __lock_acquire+0x7f4/0xb8c
         lock_acquire+0x31c/0x360
         get_online_mems+0x54/0x150
         show_slab_objects+0x94/0x3a8
         total_objects_show+0x28/0x34
         slab_attr_show+0x38/0x54
         sysfs_kf_seq_show+0x198/0x2d4
         kernfs_seq_show+0xa4/0xcc
         seq_read+0x30c/0x8a8
         kernfs_fop_read+0xa8/0x314
         __vfs_read+0x88/0x20c
         vfs_read+0xd8/0x10c
         ksys_read+0xb0/0x120
         __arm64_sys_read+0x54/0x88
         el0_svc_handler+0x170/0x240
         el0_svc+0x8/0xc

  other info that might help us debug this:

  Chain exists of:
    mem_hotplug_lock.rw_sem --> slab_mutex --> kn->count#45

   Possible unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(kn->count#45);
                                 lock(slab_mutex);
                                 lock(kn->count#45);
    lock(mem_hotplug_lock.rw_sem);

   *** DEADLOCK ***

  3 locks held by cat/5224:
   #0: 9eff00095b14b2a0 (&p->lock){+.+.}, at: seq_read+0x4c/0x8a8
   #1: 0eff008997041480 (&of->mutex){+.+.}, at: kernfs_seq_start+0x34/0xf0
   #2: b8ff009693eee398 (kn->count#45){++++}, at:
  kernfs_seq_start+0x44/0xf0

  stack backtrace:
  Call trace:
   dump_backtrace+0x0/0x248
   show_stack+0x20/0x2c
   dump_stack+0xd0/0x140
   print_circular_bug+0x368/0x380
   check_noncircular+0x248/0x250
   validate_chain+0xd10/0x2bcc
   __lock_acquire+0x7f4/0xb8c
   lock_acquire+0x31c/0x360
   get_online_mems+0x54/0x150
   show_slab_objects+0x94/0x3a8
   total_objects_show+0x28/0x34
   slab_attr_show+0x38/0x54
   sysfs_kf_seq_show+0x198/0x2d4
   kernfs_seq_show+0xa4/0xcc
   seq_read+0x30c/0x8a8
   kernfs_fop_read+0xa8/0x314
   __vfs_read+0x88/0x20c
   vfs_read+0xd8/0x10c
   ksys_read+0xb0/0x120
   __arm64_sys_read+0x54/0x88
   el0_svc_handler+0x170/0x240
   el0_svc+0x8/0xc

I think it is important to mention that this doesn't expose the
show_slab_objects to use-after-free.  There is only a single path that
might really race here and that is the slab hotplug notifier callback
__kmem_cache_shrink (via slab_mem_going_offline_callback) but that path
doesn't really destroy kmem_cache_node data structures.

[1] http://lkml.iu.edu/hypermail/linux/kernel/1101.0/02850.html

[akpm@linux-foundation.org: add comment explaining why we don't need mem_hotplug_lock]
Link: http://lkml.kernel.org/r/1570192309-10132-1-git-send-email-cai@lca.pw
Fixes: 01fb58bcba63 ("slab: remove synchronous synchronize_sched() from memcg cache deactivation path")
Fixes: 03afc0e25f7f ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory-failure.c: don't access uninitialized memmaps in memory_failure()

commit 96c804a6ae8c59a9092b3d5dd581198472063184 upstream.

We should check for pfn_to_online_page() to not access uninitialized
memmaps.  Reshuffle the code so we don't have to duplicate the error
message.

Link: http://lkml.kernel.org/r/20191009142435.3975-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: cqhci: Commit descriptors before setting the doorbell

commit c07d0073b9ec80a139d07ebf78e9c30d2a28279e upstream.

Add a write memory barrier to make sure that descriptors are actually
written to memory, before ringing the doorbell.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/proc/page.c: don't access uninitialized memmaps in fs/proc/page.c

commit aad5f69bc161af489dbb5934868bd347282f0764 upstream.

There are three places where we access uninitialized memmaps, namely:
- /proc/kpagecount
- /proc/kpageflags
- /proc/kpagecgroup

We have initialized memmaps either when the section is online or when the
page was initialized to the ZONE_DEVICE.  Uninitialized memmaps contain
garbage and in the worst case trigger kernel BUGs, especially with
CONFIG_PAGE_POISONING.

For example, not onlining a DIMM during boot and calling /proc/kpagecount
with CONFIG_PAGE_POISONING:

  :/# cat /proc/kpagecount > tmp.test
  BUG: unable to handle page fault for address: fffffffffffffffe
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 114616067 P4D 114616067 PUD 114618067 PMD 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 469 Comm: cat Not tainted 5.4.0-rc1-next-20191004+ #11
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
  RIP: 0010:kpagecount_read+0xce/0x1e0
  Code: e8 09 83 e0 3f 48 0f a3 02 73 2d 4c 89 e7 48 c1 e7 06 48 03 3d ab 51 01 01 74 1d 48 8b 57 08 480
  RSP: 0018:ffffa14e409b7e78 EFLAGS: 00010202
  RAX: fffffffffffffffe RBX: 0000000000020000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 00007f76b5595000 RDI: fffff35645000000
  RBP: 00007f76b5595000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
  R13: 0000000000020000 R14: 00007f76b5595000 R15: ffffa14e409b7f08
  FS:  00007f76b577d580(0000) GS:ffff8f41bd400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: fffffffffffffffe CR3: 0000000078960000 CR4: 00000000000006f0
  Call Trace:
   proc_reg_read+0x3c/0x60
   vfs_read+0xc5/0x180
   ksys_read+0x68/0xe0
   do_syscall_64+0x5c/0xa0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

For now, let's drop support for ZONE_DEVICE from the three pseudo files
in order to fix this.  To distinguish offline memory (with garbage
memmap) from ZONE_DEVICE memory with properly initialized memmaps, we
would have to check get_dev_pagemap() and pfn_zone_device_reserved()
right now.  The usage of both (especially, special casing devmem) is
frowned upon and needs to be reworked.

The fundamental issue we have is:

if (pfn_to_online_page(pfn)) {
/* memmap initialized */
} else if (pfn_valid(pfn)) {
/*
 * ???
 * a) offline memory. memmap garbage.
 * b) devmem: memmap initialized to ZONE_DEVICE.
 * c) devmem: reserved for driver. memmap garbage.
 * (d) devmem: memmap currently initializing - garbage)
 */
}

We'll leave the pfn_zone_device_reserved() check in stable_page_flags()
in place as that function is also used from memory failure.  We now no
longer dump information about pages that are not in use anymore -
offline.

Link: http://lkml.kernel.org/r/20191009142435.3975-2-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/base/memory.c: don't access uninitialized memmaps in soft_offline_page_store()

commit 641fe2e9387a36f9ee01d7c69382d1fe147a5e98 upstream.

Uninitialized memmaps contain garbage and in the worst case trigger kernel
BUGs, especially with CONFIG_PAGE_POISONING.  They should not get touched.

Right now, when trying to soft-offline a PFN that resides on a memory
block that was never onlined, one gets a misleading error with
CONFIG_PAGE_POISONING:

  :/# echo 5637144576 > /sys/devices/system/memory/soft_offline_page
  [   23.097167] soft offline: 0x150000 page already poisoned

But the actual result depends on the garbage in the memmap.

soft_offline_page() can only work with online pages, it returns -EIO in
case of ZONE_DEVICE.  Make sure to only forward pages that are online
(iow, managed by the buddy) and, therefore, have an initialized memmap.

Add a check against pfn_to_online_page() and similarly return -EIO.

Link: http://lkml.kernel.org/r/20191010141200.8985-1-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Bail earlier when amdgpu.cik_/si_support is not set to 1

commit 984d7a929ad68b7be9990fc9c5cfa5d5c9fc7942 upstream.

Bail from the pci_driver probe function instead of from the drm_driver
load function.

This avoid /dev/dri/card0 temporarily getting registered and then
unregistered again, sending unwanted add / remove udev events to
userspace.

Specifically this avoids triggering the (userspace) bug fixed by this
plymouth merge-request:
https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59

Note that despite that being a userspace bug, not sending unnecessary
udev events is a good idea in general.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Restore ttm prefaulting

commit 941f2f72dbbe0cf8c2d6e0b180a8021a0ec477fa upstream.

Commit 4daa4fba3a38 ("gpu: drm: ttm: Adding new return type vm_fault_t")
broke TTM prefaulting. Since vmf_insert_mixed() typically always returns
VM_FAULT_NOPAGE, prefaulting stops after the second PTE.

Restore (almost) the original behaviour. Unfortunately we can no longer
with the new vm_fault_t return type determine whether a prefaulting
PTE insertion hit an already populated PTE, and terminate the insertion
loop. Instead we continue with the pre-determined number of prefaults.

Fixes: 4daa4fba3a38 ("gpu: drm: ttm: Adding new return type vm_fault_t")
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/330387/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/edid: Add 6 bpc quirk for SDC panel in Lenovo G50

commit 11bcf5f78905b90baae8fb01e16650664ed0cb00 upstream.

Another panel that needs 6BPC quirk.

BugLink: https://bugs.launchpad.net/bugs/1819968
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402033037.21877-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: Reject malformed SSID elements

commit 4152561f5da3fca92af7179dd538ea89e248f9d0 upstream.

Although this shouldn't occur in practice, it's a good idea to bounds
check the length field of the SSID element prior to using it for things
like allocations or memcpy operations.

Cc: <stable@vger.kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Reported-by: Nicolas Waisman <nico@semmle.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20191004095132.15777-1-will@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: wext: avoid copying malformed SSIDs

commit 4ac2813cc867ae563a1ba5a9414bfb554e5796fa upstream.

Ensure the SSID element is bounds-checked prior to invoking memcpy()
with its length field, when copying to userspace.

Cc: <stable@vger.kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Reported-by: Nicolas Waisman <nico@semmle.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20191004095132.15777-2-will@kernel.org
[adjust commit log a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: CPPC: Set pcc_data[pcc_ss_id] to NULL in acpi_cppc_processor_exit()

commit 56a0b978d42f58c7e3ba715cf65af487d427524d upstream.

When enabling KASAN and DEBUG_TEST_DRIVER_REMOVE, I find this KASAN
warning:

[   20.872057] BUG: KASAN: use-after-free in pcc_data_alloc+0x40/0xb8
[   20.878226] Read of size 4 at addr ffff00236cdeb684 by task swapper/0/1
[   20.884826]
[   20.886309] CPU: 19 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00009-ge7f7df3db5bf-dirty #289
[   20.894994] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
[   20.903505] Call trace:
[   20.905942]  dump_backtrace+0x0/0x200
[   20.909593]  show_stack+0x14/0x20
[   20.912899]  dump_stack+0xd4/0x130
[   20.916291]  print_address_description.isra.9+0x6c/0x3b8
[   20.921592]  __kasan_report+0x12c/0x23c
[   20.925417]  kasan_report+0xc/0x18
[   20.928808]  __asan_load4+0x94/0xb8
[   20.932286]  pcc_data_alloc+0x40/0xb8
[   20.935938]  acpi_cppc_processor_probe+0x4e8/0xb08
[   20.940717]  __acpi_processor_start+0x48/0xb0
[   20.945062]  acpi_processor_start+0x40/0x60
[   20.949235]  really_probe+0x118/0x548
[   20.952887]  driver_probe_device+0x7c/0x148
[   20.957059]  device_driver_attach+0x94/0xa0
[   20.961231]  __driver_attach+0xa4/0x110
[   20.965055]  bus_for_each_dev+0xe8/0x158
[   20.968966]  driver_attach+0x30/0x40
[   20.972531]  bus_add_driver+0x234/0x2f0
[   20.976356]  driver_register+0xbc/0x1d0
[   20.980182]  acpi_processor_driver_init+0x40/0xe4
[   20.984875]  do_one_initcall+0xb4/0x254
[   20.988700]  kernel_init_freeable+0x24c/0x2f8
[   20.993047]  kernel_init+0x10/0x118
[   20.996524]  ret_from_fork+0x10/0x18
[   21.000087]
[   21.001567] Allocated by task 1:
[   21.004785]  save_stack+0x28/0xc8
[   21.008089]  __kasan_kmalloc.isra.9+0xbc/0xd8
[   21.012435]  kasan_kmalloc+0xc/0x18
[   21.015913]  pcc_data_alloc+0x94/0xb8
[   21.019564]  acpi_cppc_processor_probe+0x4e8/0xb08
[   21.024343]  __acpi_processor_start+0x48/0xb0
[   21.028689]  acpi_processor_start+0x40/0x60
[   21.032860]  really_probe+0x118/0x548
[   21.036512]  driver_probe_device+0x7c/0x148
[   21.040684]  device_driver_attach+0x94/0xa0
[   21.044855]  __driver_attach+0xa4/0x110
[   21.048680]  bus_for_each_dev+0xe8/0x158
[   21.052591]  driver_attach+0x30/0x40
[   21.056155]  bus_add_driver+0x234/0x2f0
[   21.059980]  driver_register+0xbc/0x1d0
[   21.063805]  acpi_processor_driver_init+0x40/0xe4
[   21.068497]  do_one_initcall+0xb4/0x254
[   21.072322]  kernel_init_freeable+0x24c/0x2f8
[   21.076667]  kernel_init+0x10/0x118
[   21.080144]  ret_from_fork+0x10/0x18
[   21.083707]
[   21.085186] Freed by task 1:
[   21.088056]  save_stack+0x28/0xc8
[   21.091360]  __kasan_slab_free+0x118/0x180
[   21.095445]  kasan_slab_free+0x10/0x18
[   21.099183]  kfree+0x80/0x268
[   21.102139]  acpi_cppc_processor_exit+0x1a8/0x1b8
[   21.106832]  acpi_processor_stop+0x70/0x80
[   21.110917]  really_probe+0x174/0x548
[   21.114568]  driver_probe_device+0x7c/0x148
[   21.118740]  device_driver_attach+0x94/0xa0
[   21.122912]  __driver_attach+0xa4/0x110
[   21.126736]  bus_for_each_dev+0xe8/0x158
[   21.130648]  driver_attach+0x30/0x40
[   21.134212]  bus_add_driver+0x234/0x2f0
[   21.0x10/0x18
[   21.161764]
[   21.163244] The buggy address belongs to the object at ffff00236cdeb600
[   21.163244]  which belongs to the cache kmalloc-256 of size 256
[   21.175750] The buggy address is located 132 bytes inside of
[   21.175750]  256-byte region [ffff00236cdeb600, ffff00236cdeb700)
[   21.187473] The buggy address belongs to the page:
[   21.192254] page:fffffe008d937a00 refcount:1 mapcount:0 mapping:ffff002370c0fa00 index:0x0 compound_mapcount: 0
[   21.202331] flags: 0x1ffff00000010200(slab|head)
[   21.206940] raw: 1ffff00000010200 dead000000000100 dead000000000122 ffff002370c0fa00
[   21.214671] raw: 0000000000000000 00000000802a002a 00000001ffffffff 0000000000000000
[   21.222400] page dumped because: kasan: bad access detected
[   21.227959]
[   21.229438] Memory state around the buggy address:
[   21.234218]  ffff00236cdeb580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   21.241427]  ffff00236cdeb600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   21.248637] >ffff00236cdeb680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   21.255845]                    ^
[   21.259062]  ffff00236cdeb700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   21.266272]  ffff00236cdeb780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   21.273480] ==================================================================

It seems that global pcc_data[pcc_ss_id] can be freed in
acpi_cppc_processor_exit(), but we may later reference this value, so
NULLify it when freed.

Also remove the useless setting of data "pcc_channel_acquired", which
we're about to free.

Fixes: 85b1407bf6d2 ("ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs")
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting

commit 22e58665a01006d05f0239621f7d41cacca96cc4 upstream.

Unlike other format-related DAI parameters, rdai->bit_clk_inv flag
is not properly re-initialized when setting format for new stream
processing. The inversion, if requested, is then applied not to default,
but to a previous value, which leads to SCKP bit in SSICR register being
set incorrectly.
Fix this by re-setting the flag to its initial value, determined by format.

Fixes: 1a7889ca8aba3 ("ASoC: rsnd: fixup SND_SOC_DAIFMT_xB_xF behavior")
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Junya Monden <jmonden@jp.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191016124255.7442-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics-rmi4 - avoid processing unknown IRQs

commit 363c53875aef8fce69d4a2d0873919ccc7d9e2ad upstream.

rmi_process_interrupt_requests() calls handle_nested_irq() for
each interrupt status bit it finds. If the irq domain mapping for
this bit had not yet been set up, then it ends up calling
handle_nested_irq(0), which causes a NULL pointer dereference.

There's already code that masks the irq_status bits coming out of the
hardware with current_irq_mask, presumably to avoid this situation.
However current_irq_mask seems to more reflect the actual mask set
in the hardware rather than the IRQs software has set up and registered
for. For example, in rmi_driver_reset_handler(), the current_irq_mask
is initialized based on what is read from the hardware. If the reset
value of this mask enables IRQs that Linux has not set up yet, then
we end up in this situation.

There appears to be a third unused bitmask that used to serve this
purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask
to avoid calling handle_nested_irq() on IRQs that have not yet been
set up.

Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Andrew Duggan <aduggan@synaptics.com>
Link: https://lore.kernel.org/r/20191008223657.163366-1-evgreen@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: da9063 - fix capability and drop KEY_SLEEP

commit afce285b859cea91c182015fc9858ea58c26cd0e upstream.

Since commit f889beaaab1c ("Input: da9063 - report KEY_POWER instead of
KEY_SLEEP during power key-press") KEY_SLEEP isn't supported anymore. This
caused input device to not generate any events if "dlg,disable-key-power"
is set.

Fix this by unconditionally setting KEY_POWER capability, and not
declaring KEY_SLEEP.

Fixes: f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ch: Make it possible to open a ch device multiple times again

commit 6a0990eaa768dfb7064f06777743acc6d392084b upstream.

Clearing ch->device in ch_release() is wrong because that pointer must
remain valid until ch_remove() is called. This patch fixes the following
crash the second time a ch device is opened:

BUG: kernel NULL pointer dereference, address: 0000000000000790
RIP: 0010:scsi_device_get+0x5/0x60
Call Trace:
 ch_open+0x4c/0xa0 [ch]
 chrdev_open+0xa2/0x1c0
 do_dentry_open+0x13a/0x380
 path_openat+0x591/0x1470
 do_filp_open+0x91/0x100
 do_sys_open+0x184/0x220
 do_syscall_64+0x5f/0x1a0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 085e56766f74 ("scsi: ch: add refcounting")
Cc: Hannes Reinecke <hare@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191009173536.247889-1-bvanassche@acm.org
Reported-by: Rob Turk <robtu@rtist.nl>
Suggested-by: Rob Turk <robtu@rtist.nl>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: try to get module before removing device

commit 77c301287ebae86cc71d03eb3806f271cb14da79 upstream.

We have a test case like block/001 in blktests, which will create a scsi
device by loading scsi_debug module and then try to delete the device by
sysfs interface. At the same time, it may remove the scsi_debug module.

And getting a invalid paging request BUG_ON as following:

[   34.625854] BUG: unable to handle page fault for address: ffffffffa0016bb8
[   34.629189] Oops: 0000 [#1] SMP PTI
[   34.629618] CPU: 1 PID: 450 Comm: bash Tainted: G        W         5.4.0-rc3+ #473
[   34.632524] RIP: 0010:scsi_proc_hostdir_rm+0x5/0xa0
[   34.643555] CR2: ffffffffa0016bb8 CR3: 000000012cd88000 CR4: 00000000000006e0
[   34.644545] Call Trace:
[   34.644907]  scsi_host_dev_release+0x6b/0x1f0
[   34.645511]  device_release+0x74/0x110
[   34.646046]  kobject_put+0x116/0x390
[   34.646559]  put_device+0x17/0x30
[   34.647041]  scsi_target_dev_release+0x2b/0x40
[   34.647652]  device_release+0x74/0x110
[   34.648186]  kobject_put+0x116/0x390
[   34.648691]  put_device+0x17/0x30
[   34.649157]  scsi_device_dev_release_usercontext+0x2e8/0x360
[   34.649953]  execute_in_process_context+0x29/0x80
[   34.650603]  scsi_device_dev_release+0x20/0x30
[   34.651221]  device_release+0x74/0x110
[   34.651732]  kobject_put+0x116/0x390
[   34.652230]  sysfs_unbreak_active_protection+0x3f/0x50
[   34.652935]  sdev_store_delete.cold.4+0x71/0x8f
[   34.653579]  dev_attr_store+0x1b/0x40
[   34.654103]  sysfs_kf_write+0x3d/0x60
[   34.654603]  kernfs_fop_write+0x174/0x250
[   34.655165]  __vfs_write+0x1f/0x60
[   34.655639]  vfs_write+0xc7/0x280
[   34.656117]  ksys_write+0x6d/0x140
[   34.656591]  __x64_sys_write+0x1e/0x30
[   34.657114]  do_syscall_64+0xb1/0x400
[   34.657627]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   34.658335] RIP: 0033:0x7f156f337130

During deleting scsi target, the scsi_debug module have been removed. Then,
sdebug_driver_template belonged to the module cannot be accessd, resulting
in scsi_proc_hostdir_rm() BUG_ON.

To fix the bug, we add scsi_device_get() in sdev_store_delete() to try to
increase refcount of module, avoiding the module been removed.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191015130556.18061-1-yuyufen@huawei.com
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: save/restore command resid for error handling

commit 8f8fed0cdbbd6cdbf28d9ebe662f45765d2f7d39 upstream.

When a non-passthrough command is terminated with CHECK CONDITION, request
sense is executed by hijacking the command descriptor. Since
scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd() do not save/restore the
original command resid, the value returned on failure of the original
command is lost and replaced with the value set by the execution of the
request sense command. This value may in many instances be unaligned to the
device sector size, causing sd_done() to print a warning message about the
incorrect unaligned resid before the command is retried.

Fix this problem by saving the original command residual in struct
scsi_eh_save using scsi_eh_prep_cmnd() and restoring it in
scsi_eh_restore_cmnd(). In addition, to make sure that the request sense
command is executed with a correctly initialized command structure, also
reset the residual to 0 in scsi_eh_prep_cmnd() after saving the original
command value in struct scsi_eh_save.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191001074839.1994-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sd: Ignore a failure to sync cache due to lack of authorization

commit 21e3d6c81179bbdfa279efc8de456c34b814cfd2 upstream.

I've got a report about a UAS drive enclosure reporting back Sense: Logical
unit access not authorized if the drive it holds is password protected.
While the drive is obviously unusable in that state as a mass storage
device, it still exists as a sd device and when the system is asked to
perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If
that fails due to password protection, the error must be ignored.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix reaction on bit error threshold notification

commit 2190168aaea42c31bff7b9a967e7b045f07df095 upstream.

On excessive bit errors for the FCP channel ingress fibre path, the channel
notifies us.  Previously, we only emitted a kernel message and a trace
record.  Since performance can become suboptimal with I/O timeouts due to
bit errors, we now stop using an FCP device by default on channel
notification so multipath on top can timely failover to other paths.  A new
module parameter zfcp.ber_stop can be used to get zfcp old behavior.

User explanation of new kernel message:

 * Description:
 * The FCP channel reported that its bit error threshold has been exceeded.
 * These errors might result from a problem with the physical components
 * of the local fibre link into the FCP channel.
 * The problem might be damage or malfunction of the cable or
 * cable connection between the FCP channel and
 * the adjacent fabric switch port or the point-to-point peer.
 * Find details about the errors in the HBA trace for the FCP device.
 * The zfcp device driver closed down the FCP device
 * to limit the performance impact from possible I/O command timeouts.
 * User action:
 * Check for problems on the local fibre link, ensure that fibre optics are
 * clean and functional, and all cables are properly plugged.
 * After the repair action, you can manually recover the FCP device by
 * writing "0" into its "failed" sysfs attribute.
 * If recovery through sysfs is not possible, set the CHPID of the device
 * offline and back online on the service element.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org> #2.6.30+
Link: https://lore.kernel.org/r/20191001104949.42810-1-maier@linux.ibm.com
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS

commit 153c5d8191c26165dbbd2646448ca7207f7796d0 upstream.

Currently the exit return path when sme->key_idx >= NUM_WEPKEYS is via
label 'exit' and this checks if result is non-zero, however result has
not been initialized and contains garbage.  Fix this by replacing the
goto with a return with the error code.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 0ca6d8e74489 ("Staging: wlan-ng: replace switch-case statements with macro")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191014110201.9874-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: tlbex: Fix build_restore_pagemask KScratch restore

commit b42aa3fd5957e4daf4b69129e5ce752a2a53e7d6 upstream.

build_restore_pagemask() will restore the value of register $1/$at when
its restore_scratch argument is non-zero, and aims to do so by filling a
branch delay slot. Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0
-> mfc0 sequence.") added an EHB instruction (Execution Hazard Barrier)
prior to restoring $1 from a KScratch register, in order to resolve a
hazard that can result in stale values of the KScratch register being
observed. In particular, P-class CPUs from MIPS with out of order
execution pipelines such as the P5600 & P6600 are affected.

Unfortunately this EHB instruction was inserted in the branch delay slot
causing the MFC0 instruction which performs the restoration to no longer
execute along with the branch. The result is that the $1 register isn't
actually restored, ie. the TLB refill exception handler clobbers it -
which is exactly the problem the EHB is meant to avoid for the P-class
CPUs.

Similarly build_get_pgd_vmalloc() will restore the value of $1/$at when
its mode argument equals refill_scratch, and suffers from the same
problem.

Fix this by in both cases moving the EHB earlier in the emitted code.
There's no reason it needs to immediately precede the MFC0 - it simply
needs to be between the MTC0 & MFC0.

This bug only affects Cavium Octeon systems which use
build_fast_tlb_refill_handler().

Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
Cc: Dmitry Korotin <dkorotin@wavecomp.com>
Cc: stable@vger.kernel.org # v3.15+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ldusb: fix read info leaks

commit 7a6f22d7479b7a0b68eadd308a997dd64dda7dae upstream.

Fix broken read implementation, which could be used to trigger slab info
leaks.

The driver failed to check if the custom ring buffer was still empty
when waking up after having waited for more data. This would happen on
every interrupt-in completion, even if no data had been added to the
ring buffer (e.g. on disconnect events).

Due to missing sanity checks and uninitialised (kmalloced) ring-buffer
entries, this meant that huge slab info leaks could easily be triggered.

Note that the empty-buffer check after wakeup is enough to fix the info
leak on disconnect, but let's clear the buffer on allocation and add a
sanity check to read() to prevent further leaks.

Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Reported-by: syzbot+6fe95b826644f7f12b0b@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191018151955.25135-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usblp: fix use-after-free on disconnect

commit 7a759197974894213621aa65f0571b51904733d6 upstream.

A recent commit addressing a runtime PM use-count regression, introduced
a use-after-free by not making sure we held a reference to the struct
usb_interface for the lifetime of the driver data.

Fixes: 9a31535859bf ("USB: usblp: fix runtime PM after driver unbind")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+cd24df4d075c319ebfc5@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191015175522.18490-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ldusb: fix memleak on disconnect

commit b14a39048c1156cfee76228bf449852da2f14df8 upstream.

If disconnect() races with release() after a process has been
interrupted, release() could end up returning early and the driver would
fail to free its driver data.

Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191010125835.27031-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ti_usb_3410_5052: fix port-close races

commit 6f1d1dc8d540a9aa6e39b9cb86d3a67bbc1c8d8d upstream.

Fix races between closing a port and opening or closing another port on
the same device which could lead to a failure to start or stop the
shared interrupt URB. The latter could potentially cause a
use-after-free or worse in the completion handler on driver unbind.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: udc: lpc32xx: fix bad bit shift operation

commit b987b66ac3a2bc2f7b03a0ba48a07dc553100c07 upstream.

It seems that the right variable to use in this case is *i*, instead of
*n*, otherwise there is an undefined behavior when right shifiting by more
than 31 bits when multiplying n by 8; notice that *n* can take values
equal or greater than 4 (4, 8, 16, ...).

Also, notice that under the current conditions (bl = 3), we are skiping
the handling of bytes 3, 7, 31... So, fix this by updating this logic
and limit *bl* up to 4 instead of up to 3.

This fix is based on function udc_stuff_fifo().

Addresses-Coverity-ID: 1454834 ("Bad bit shift operation")
Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20191014191830.GA10721@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Force runtime PM on Nvidia HDMI codecs

commit 94989e318b2f11e217e86bee058088064fa9a2e9 upstream.

Przemysław Kopa reports that since commit b516ea586d71 ("PCI: Enable
NVIDIA HDA controllers"), the discrete GPU Nvidia GeForce GT 540M on his
2011 Samsung laptop refuses to runtime suspend, resulting in a power
regression and excessive heat.

Rivera Valdez witnesses the same issue with a GeForce GT 525M (GF108M)
of the same era, as does another Arch Linux user named "R0AR" with a
more recent GeForce GTX 1050 Ti (GP107M).

The commit exposes the discrete GPU's HDA controller and all four codecs
on the controller do not set the CLKSTOP and EPSS bits in the Supported
Power States Response.  They also do not set the PS-ClkStopOk bit in the
Get Power State Response.  hda_codec_runtime_suspend() therefore does
not call snd_hdac_codec_link_down(), which prevents each codec and the
PCI device from runtime suspending.

The same issue is present on some AMD discrete GPUs and we addressed it
by forcing runtime PM despite the bits not being set, see commit
57cb54e53bdd ("ALSA: hda - Force to link down at runtime suspend on
ATI/AMD HDMI").

Do the same for Nvidia HDMI codecs.

Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
Link: https://bbs.archlinux.org/viewtopic.php?pid=1865512
Link: https://bugs.freedesktop.org/show_bug.cgi?id=75985#c81
Reported-by: Przemysław Kopa <prymoo@gmail.com>
Reported-by: Rivera Valdez <riveravaldez@ysinembargo.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Drake <dan@reactivated.net>
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/r/3086bc75135c1e3567c5bc4f3cc4ff5cbf7a56c2.1571324194.git.lukas@wunner.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Disable quirks for BOSS Katana amplifiers

commit 7571b6a17fcc5e4f6903f065a82d0e38011346ed upstream.

BOSS Katana amplifiers cannot be used for recording or playback if quirks
are applied

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195223
Signed-off-by: Szabolcs Szőke <szszoke.code@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191011171937.8013-1-szszoke.code@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Enable headset mic on Asus MJ401TA

commit 8c8967a7dc01a25f57a0757fdca10987773cd1f2 upstream.

On Asus MJ401TA (with Realtek ALC256), the headset mic is connected to
pin 0x19, with default configuration value 0x411111f0 (indicating no
physical connection).

Enable this by quirking the pin. Mic jack detection was also tested and
found to be working.

This enables use of the headset mic on this product.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191017081501.17135-1-drake@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add support for ALC711

commit 83629532ce45ef9df1f297b419b9ea112045685d upstream.

Support new codec ALC711.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: legousbtower: fix memleak on disconnect

commit b6c03e5f7b463efcafd1ce141bd5a8fc4e583ae2 upstream.

If disconnect() races with release() after a process has been
interrupted, release() could end up returning early and the driver would
fail to free its driver data.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191010125835.27031-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memfd: Fix locking when tagging pins

The RCU lock is insufficient to protect the radix tree iteration as
a deletion from the tree can occur before we take the spinlock to
tag the entry.  In 4.19, this has manifested as a bug with the following
trace:

kernel BUG at lib/radix-tree.c:1429!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 7 PID: 6935 Comm: syz-executor.2 Not tainted 4.19.36 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:radix_tree_tag_set+0x200/0x2f0 lib/radix-tree.c:1429
Code: 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 44 24 10 e8 a3 29 7e fe 48 8b 44 24 10 48 0f ab 03 e9 d2 fe ff ff e8 90 29 7e fe <0f> 0b 48 c7 c7 e0 5a 87 84 e8 f0 e7 08 ff 4c 89 ef e8 4a ff ac fe
RSP: 0018:ffff88837b13fb60 EFLAGS: 00010016
RAX: 0000000000040000 RBX: ffff8883c5515d58 RCX: ffffffff82cb2ef0
RDX: 0000000000000b72 RSI: ffffc90004cf2000 RDI: ffff8883c5515d98
RBP: ffff88837b13fb98 R08: ffffed106f627f7e R09: ffffed106f627f7e
R10: 0000000000000001 R11: ffffed106f627f7d R12: 0000000000000004
R13: ffffea000d7fea80 R14: 1ffff1106f627f6f R15: 0000000000000002
FS:  00007fa1b8df2700(0000) GS:ffff8883e2fc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa1b8df1db8 CR3: 000000037d4d2001 CR4: 0000000000160ee0
Call Trace:
 memfd_tag_pins mm/memfd.c:51 [inline]
 memfd_wait_for_pins+0x2c5/0x12d0 mm/memfd.c:81
 memfd_add_seals mm/memfd.c:215 [inline]
 memfd_fcntl+0x33d/0x4a0 mm/memfd.c:247
 do_fcntl+0x589/0xeb0 fs/fcntl.c:421
 __do_sys_fcntl fs/fcntl.c:463 [inline]
 __se_sys_fcntl fs/fcntl.c:448 [inline]
 __x64_sys_fcntl+0x12d/0x180 fs/fcntl.c:448
 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:293

The problem does not occur in mainline due to the XArray rewrite which
changed the locking to exclude modification of the tree during iteration.
At the time, nobody realised this was a bugfix.  Backport the locking
changes to stable.

Cc: stable@vger.kernel.org
Reported-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: change sctp_prot .no_autobind with true

[ Upstream commit 63dfb7938b13fa2c2fbcb45f34d065769eb09414 ]

syzbot reported a memory leak:

  BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64):
  backtrace:

    [...] slab_alloc mm/slab.c:3319 [inline]
    [...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483
    [...] sctp_bucket_create net/sctp/socket.c:8523 [inline]
    [...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270
    [...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402
    [...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497
    [...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022
    [...] sctp_setsockopt net/sctp/socket.c:4641 [inline]
    [...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611
    [...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147
    [...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
    [...] __do_sys_setsockopt net/socket.c:2100 [inline]

It was caused by when sending msgs without binding a port, in the path:
inet_sendmsg() -> inet_send_prepare() -> inet_autobind() ->
.get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is
not. Later when binding another port by sctp_setsockopt_bindx(), a new
bucket will be created as bp->port is not set.

sctp's autobind is supposed to call sctp_autobind() where it does all
things including setting bp->port. Since sctp_autobind() is called in
sctp_sendmsg() if the sk is not yet bound, it should have skipped the
auto bind.

THis patch is to avoid calling inet_autobind() in inet_send_prepare()
by changing sctp_prot .no_autobind with true, also remove the unused
.get_port.

Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: disable/enable ptp_ref_clk in suspend/resume flow

[ Upstream commit e497c20e203680aba9ccf7bb475959595908ca7e ]

disable ptp_ref_clk in suspend flow, and enable it in resume flow.

Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv6: fix listify ip6_rcv_finish in case of forwarding

[ Upstream commit c7a42eb49212f93a800560662d17d5293960d3c3 ]

We need a similar fix for ipv6 as Commit 0761680d5215 ("net: ipv4: fix
listify ip_rcv_finish in case of forwarding") does for ipv4.

This issue can be reprocuded by syzbot since Commit 323ebb61e32b ("net:
use listified RX for handling GRO_NORMAL skbs") on net-next. The call
trace was:

  kernel BUG at include/linux/skbuff.h:2225!
  RIP: 0010:__skb_pull include/linux/skbuff.h:2225 [inline]
  RIP: 0010:skb_pull+0xea/0x110 net/core/skbuff.c:1902
  Call Trace:
    sctp_inq_pop+0x2f1/0xd80 net/sctp/inqueue.c:202
    sctp_endpoint_bh_rcv+0x184/0x8d0 net/sctp/endpointola.c:385
    sctp_inq_push+0x1e4/0x280 net/sctp/inqueue.c:80
    sctp_rcv+0x2807/0x3590 net/sctp/input.c:256
    sctp6_rcv+0x17/0x30 net/sctp/ipv6.c:1049
    ip6_protocol_deliver_rcu+0x2fe/0x1660 net/ipv6/ip6_input.c:397
    ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:438
    NF_HOOK include/linux/netfilter.h:305 [inline]
    NF_HOOK include/linux/netfilter.h:299 [inline]
    ip6_input+0xe4/0x3f0 net/ipv6/ip6_input.c:447
    dst_input include/net/dst.h:442 [inline]
    ip6_sublist_rcv_finish+0x98/0x1e0 net/ipv6/ip6_input.c:84
    ip6_list_rcv_finish net/ipv6/ip6_input.c:118 [inline]
    ip6_sublist_rcv+0x80c/0xcf0 net/ipv6/ip6_input.c:282
    ipv6_list_rcv+0x373/0x4b0 net/ipv6/ip6_input.c:316
    __netif_receive_skb_list_ptype net/core/dev.c:5049 [inline]
    __netif_receive_skb_list_core+0x5fc/0x9d0 net/core/dev.c:5097
    __netif_receive_skb_list net/core/dev.c:5149 [inline]
    netif_receive_skb_list_internal+0x7eb/0xe60 net/core/dev.c:5244
    gro_normal_list.part.0+0x1e/0xb0 net/core/dev.c:5757
    gro_normal_list net/core/dev.c:5755 [inline]
    gro_normal_one net/core/dev.c:5769 [inline]
    napi_frags_finish net/core/dev.c:5782 [inline]
    napi_gro_frags+0xa6a/0xea0 net/core/dev.c:5855
    tun_get_user+0x2e98/0x3fa0 drivers/net/tun.c:1974
    tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2020

Fixes: d8269e2cbf90 ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()")
Fixes: 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs")
Reported-by: syzbot+eb349eeee854e389c36d@syzkaller.appspotmail.com
Reported-by: syzbot+4a0643a653ac375612d1@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ibmvnic: Fix EOI when running in XIVE mode.

[ Upstream commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab ]

pSeries machines on POWER9 processors can run with the XICS (legacy)
interrupt mode or with the XIVE exploitation interrupt mode. These
interrupt contollers have different interfaces for interrupt
management : XICS uses hcalls and XIVE loads and stores on a page.
H_EOI being a XICS interface the enable_scrq_irq() routine can fail
when the machine runs in XIVE mode.

Fix that by calling the EOI handler of the interrupt chip.

Fixes: f23e0643cd0b ("ibmvnic: Clear pending interrupt after device reset")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: i82596: fix dma_alloc_attr for sni_82596

[ Upstream commit 61c1d33daf7b5146f44d4363b3322f8cda6a6c43 ]

Commit 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs")
switched dma allocation over to dma_alloc_attr, but didn't convert
the SNI part to request consistent DMA memory. This broke sni_82596
since driver doesn't do dma_cache_sync for performance reasons.
Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596.

Fixes: 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bcmgenet: Set phydev->dev_flags only for internal PHYs

[ Upstream commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ]

phydev->dev_flags is entirely dependent on the PHY device driver which
is going to be used, setting the internal GENET PHY revision in those
bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver
being used.

Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3

[ Upstream commit efb86fede98cdc70b674692ff617b1162f642c49 ]

The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and
became 6 for GENET v4 and above, account for that difference.

Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: avoid potential infinite loop in tc_ctl_action()

[ Upstream commit 39f13ea2f61b439ebe0060393e9c39925c9ee28c ]

tc_ctl_action() has the ability to loop forever if tcf_action_add()
returns -EAGAIN.

This special case has been done in case a module needed to be loaded,
but it turns out that tcf_add_notify() could also return -EAGAIN
if the socket sk_rcvbuf limit is hit.

We need to separate the two cases, and only loop for the module
loading case.

While we are at it, add a limit of 10 attempts since unbounded
loops are always scary.

syzbot repro was something like :

socket(PF_NETLINK, SOCK_RAW|SOCK_NONBLOCK, NETLINK_ROUTE) = 3
write(3, ..., 38) = 38
setsockopt(3, SOL_SOCKET, SO_RCVBUF, [0], 4) = 0
sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{..., 388}], msg_controllen=0, msg_flags=0x10}, ...)

NMI backtrace for cpu 0
CPU: 0 PID: 1054 Comm: khungtaskd Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 nmi_cpu_backtrace.cold+0x70/0xb2 lib/nmi_backtrace.c:101
 nmi_trigger_cpumask_backtrace+0x23b/0x28b lib/nmi_backtrace.c:62
 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
 trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline]
 check_hung_uninterruptible_tasks kernel/hung_task.c:205 [inline]
 watchdog+0x9d0/0xef0 kernel/hung_task.c:289
 kthread+0x361/0x430 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8859 Comm: syz-executor910 Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:arch_local_save_flags arch/x86/include/asm/paravirt.h:751 [inline]
RIP: 0010:lockdep_hardirqs_off+0x1df/0x2e0 kernel/locking/lockdep.c:3453
Code: 5c 08 00 00 5b 41 5c 41 5d 5d c3 48 c7 c0 58 1d f3 88 48 ba 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 0f 85 d3 00 00 00 <48> 83 3d 21 9e 99 07 00 0f 84 b9 00 00 00 9c 58 0f 1f 44 00 00 f6
RSP: 0018:ffff8880a6f3f1b8 EFLAGS: 00000046
RAX: 1ffffffff11e63ab RBX: ffff88808c9c6080 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff88808c9c6914
RBP: ffff8880a6f3f1d0 R08: ffff88808c9c6080 R09: fffffbfff16be5d1
R10: fffffbfff16be5d0 R11: 0000000000000003 R12: ffffffff8746591f
R13: ffff88808c9c6080 R14: ffffffff8746591f R15: 0000000000000003
FS:  00000000011e4880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff600400 CR3: 00000000a8920000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 trace_hardirqs_off+0x62/0x240 kernel/trace/trace_preemptirq.c:45
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
 _raw_spin_lock_irqsave+0x6f/0xcd kernel/locking/spinlock.c:159
 __wake_up_common_lock+0xc8/0x150 kernel/sched/wait.c:122
 __wake_up+0xe/0x10 kernel/sched/wait.c:142
 netlink_unlock_table net/netlink/af_netlink.c:466 [inline]
 netlink_unlock_table net/netlink/af_netlink.c:463 [inline]
 netlink_broadcast_filtered+0x705/0xb80 net/netlink/af_netlink.c:1514
 netlink_broadcast+0x3a/0x50 net/netlink/af_netlink.c:1534
 rtnetlink_send+0xdd/0x110 net/core/rtnetlink.c:714
 tcf_add_notify net/sched/act_api.c:1343 [inline]
 tcf_action_add+0x243/0x370 net/sched/act_api.c:1362
 tc_ctl_action+0x3b5/0x4bc net/sched/act_api.c:1410
 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5386
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5404
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x803/0x920 net/socket.c:2311
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356
 __do_sys_sendmsg net/socket.c:2365 [inline]
 __se_sys_sendmsg net/socket.c:2363 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440939

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+cf0adbb9c28c8866c788@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: Return -ENETUNREACH if we can't create route but saddr is valid

[ Upstream commit 595e0651d0296bad2491a4a29a7a43eae6328b02 ]

...instead of -EINVAL. An issue was found with older kernel versions
while unplugging a NFS client with pending RPCs, and the wrong error
code here prevented it from recovering once link is back up with a
configured address.

Incidentally, this is not an issue anymore since commit 4f8943f80883
("SUNRPC: Replace direct task wakeups from softirq context"), included
in 5.2-rc7, had the effect of decoupling the forwarding of this error
by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin
Coddington.

To the best of my knowledge, this isn't currently causing any further
issue, but the error code doesn't look appropriate anyway, and we
might hit this in other paths as well.

In detail, as analysed by Gonzalo Siero, once the route is deleted
because the interface is down, and can't be resolved and we return
-EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(),
as the socket error seen by tcp_write_err(), called by
tcp_retransmit_timer().

In turn, tcp_write_err() indirectly calls xs_error_report(), which
wakes up the RPC pending tasks with a status of -EINVAL. This is then
seen by call_status() in the SUN RPC implementation, which aborts the
RPC call calling rpc_exit(), instead of handling this as a
potentially temporary condition, i.e. as a timeout.

Return -EINVAL only if the input parameters passed to
ip_route_output_key_hash_rcu() are actually invalid (this is the case
if the specified source address is multicast, limited broadcast or
all zeroes), but return -ENETUNREACH in all cases where, at the given
moment, the given source address doesn't allow resolving the route.

While at it, drop the initialisation of err to -ENETUNREACH, which
was added to __ip_route_output_key() back then by commit
0315e3827048 ("net: Fix behaviour of unreachable, blackhole and
prohibit routes"), but actually had no effect, as it was, and is,
overwritten by the fib_lookup() return code assignment, and anyway
ignored in all other branches, including the if (fl4->saddr) one:
I find this rather confusing, as it would look like -ENETUNREACH is
the "default" error, while that statement has no effect.

Also note that after commit fc75fc8339e7 ("ipv4: dont create routes
on down devices"), we would get -ENETUNREACH if the device is down,
but -EINVAL if the source address is specified and we can't resolve
the route, and this appears to be rather inconsistent.

Reported-by: Stefan Walter <walteste@inf.ethz.ch>
Analysed-by: Benjamin Coddington <bcodding@redhat.com>
Analysed-by: Gonzalo Siero <gsierohu@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fix race condition between route lookup and invalidation

[ Upstream commit 5018c59607a511cdee743b629c76206d9c9e6d7b ]

Jesse and Ido reported the following race condition:
<CPU A, t0> - Received packet A is forwarded and cached dst entry is
taken from the nexthop ('nhc->nhc_rth_input'). Calls skb_dst_set()

<t1> - Given Jesse has busy routers ("ingesting full BGP routing tables
from multiple ISPs"), route is added / deleted and rt_cache_flush() is
called

<CPU B, t2> - Received packet B tries to use the same cached dst entry
from t0, but rt_cache_valid() is no longer true and it is replaced in
rt_cache_route() by the newer one. This calls dst_dev_put() on the
original dst entry which assigns the blackhole netdev to 'dst->dev'

<CPU A, t3> - dst_input(skb) is called on packet A and it is dropped due
to 'dst->dev' being the blackhole netdev

There are 2 issues in the v4 routing code:
1. A per-netns counter is used to do the validation of the route. That
means whenever a route is changed in the netns, users of all routes in
the netns needs to redo lookup. v6 has an implementation of only
updating fn_sernum for routes that are affected.
2. When rt_cache_valid() returns false, rt_cache_route() is called to
throw away the current cache, and create a new one. This seems
unnecessary because as long as this route does not change, the route
cache does not need to be recreated.

To fully solve the above 2 issues, it probably needs quite some code
changes and requires careful testing, and does not suite for net branch.

So this patch only tries to add the deleted cached rt into the uncached
list, so user could still be able to use it to receive packets until
it's done.

Fixes: 95c47f9cf5e0 ("ipv4: call dst_dev_put() properly")
Signed-off-by: Wei Wang <weiwan@google.com>
Reported-by: Ido Schimmel <idosch@idosch.org>
Reported-by: Jesse Hathaway <jesse@mbuki-mvuki.org>
Tested-by: Jesse Hathaway <jesse@mbuki-mvuki.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix panic due to ocfs2_wq is null

commit b918c43021baaa3648de09e19a4a3dd555a45f40 upstream.

mount.ocfs2 failed when reading ocfs2 filesystem superblock encounters
an error.  ocfs2_initialize_super() returns before allocating ocfs2_wq.
ocfs2_dismount_volume() triggers the following panic.

  Oct 15 16:09:27 cnwarekv-205120 kernel: On-disk corruption discovered.Please run fsck.ocfs2 once the filesystem is unmounted.
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_read_locked_inode:537 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:458 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:491 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_initialize_super:2313 ERROR: status = -30
  Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_fill_super:1033 ERROR: status = -30
  ------------[ cut here ]------------
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 11753 Comm: mount.ocfs2 Tainted: G  E
        4.14.148-200.ckv.x86_64 #1
  Hardware name: Sugon H320-G30/35N16-US, BIOS 0SSDX017 12/21/2018
  task: ffff967af0520000 task.stack: ffffa5f05484000
  RIP: 0010:mutex_lock+0x19/0x20
  Call Trace:
    flush_workqueue+0x81/0x460
    ocfs2_shutdown_local_alloc+0x47/0x440 [ocfs2]
    ocfs2_dismount_volume+0x84/0x400 [ocfs2]
    ocfs2_fill_super+0xa4/0x1270 [ocfs2]
    ? ocfs2_initialize_super.isa.211+0xf20/0xf20 [ocfs2]
    mount_bdev+0x17f/0x1c0
    mount_fs+0x3a/0x160

Link: http://lkml.kernel.org/r/1571139611-24107-1-git-send-email-yili@winhong.com
Signed-off-by: Yi Li <yilikernel@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/radeon: Fix EEH during kexec"

[ Upstream commit 8d13c187c42e110625d60094668a8f778c092879 ]

This reverts commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6.

This breaks some boards.  Maybe just enable this on PPC for
now?

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205147
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid0: fix warning message for parameter default_layout

[ Upstream commit 3874d73e06c9b9dc15de0b7382fc223986d75571 ]

The message should match the parameter, i.e. raid0.default_layout.

Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: NeilBrown <neilb@suse.de>
Reported-by: Ivan Topolsky <doktor.yak@gmail.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libata/ahci: Fix PCS quirk application

[ Upstream commit 09d6ac8dc51a033ae0043c1fe40b4d02563c2496 ]

Commit c312ef176399 "libata/ahci: Drop PCS quirk for Denverton and
beyond" got the polarity wrong on the check for which board-ids should
have the quirk applied. The board type board_ahci_pcs7 is defined at the
end of the list such that "pcs7" boards can be special cased in the
future if they need the quirk. All prior Intel board ids "<
board_ahci_pcs7" should proceed with applying the quirk.

Reported-by: Andreas Friedrich <afrie@gmx.net>
Reported-by: Stephen Douthit <stephend@silicom-usa.com>
Fixes: c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

namespace: fix namespace.pl script to support relative paths

[ Upstream commit 82fdd12b95727640c9a8233c09d602e4518e71f7 ]

The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.

Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.

This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.

This behavior was changed in 7e1c04779efd ("kbuild: Use relative path
for $(objtree)", 2014-05-14)

Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.

Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.

The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.

rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.

Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: Set macpassthru in reset_resume callback

[ Upstream commit a54cdeeb04fc719e4c7f19d6e28dba7ea86cee5b ]

r8152 may fail to establish network connection after resume from system
suspend.

If the USB port connects to r8152 lost its power during system suspend,
the MAC address was written before is lost. The reason is that The MAC
address doesn't get written again in its reset_resume callback.

So let's set MAC address again in reset_resume callback. Also remove
unnecessary lock as no other locking attempt will happen during
reset_resume.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib: textsearch: fix escapes in example code

[ Upstream commit 2105b52e30debe7f19f3218598d8ae777dcc6776 ]

This textsearch code example does not need the '\' escapes and they can
be misleading to someone reading the example. Also, gcc and sparse warn
that the "\%d" is an unknown escape sequence.

Fixes: 5968a70d7af5 ("textsearch: fix kernel-doc warnings and add kernel-api section")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hisilicon: Fix usage of uninitialized variable in function mdio_sc_cfg_reg_write()

[ Upstream commit 53de429f4e88f538f7a8ec2b18be8c0cd9b2c8e1 ]

In function mdio_sc_cfg_reg_write(), variable "reg_value" could be
uninitialized if regmap_read() fails. However, "reg_value" is used
to decide the control flow later in the if statement, which is
potentially unsafe.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: Loongson: Fix the link time qualifier of 'serial_exit()'

[ Upstream commit 25b69a889b638b0b7e51e2c4fe717a66bec0e566 ]

'exit' functions should be marked as __exit, not __init.

Fixes: 85cc028817ef ("mips: make loongsoon serial driver explicitly modular")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: chenhc@lemote.com
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: rtl8366rb: add missing of_node_put after calling of_get_child_by_name

[ Upstream commit f32eb9d80470dab05df26b6efd02d653c72e6a11 ]

of_node_put needs to be called when the device node which is got
from of_get_child_by_name finished using.
irq_domain_add_linear() also calls of_node_get() to increase refcount,
so irq_domain will not be affected when it is released.

Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_connlimit: disable bh on garbage collection

[ Upstream commit 34a4c95abd25ab41fb390b985a08a651b1fa0b0f ]

BH must be disabled when invoking nf_conncount_gc_list() to perform
garbage collection, otherwise deadlock might happen.

  nf_conncount_add+0x1f/0x50 [nf_conncount]
  nft_connlimit_eval+0x4c/0xe0 [nft_connlimit]
  nft_dynset_eval+0xb5/0x100 [nf_tables]
  nft_do_chain+0xea/0x420 [nf_tables]
  ? sch_direct_xmit+0x111/0x360
  ? noqueue_init+0x10/0x10
  ? __qdisc_run+0x84/0x510
  ? tcp_packet+0x655/0x1610 [nf_conntrack]
  ? ip_finish_output2+0x1a7/0x430
  ? tcp_error+0x130/0x150 [nf_conntrack]
  ? nf_conntrack_in+0x1fc/0x4c0 [nf_conntrack]
  nft_do_chain_ipv4+0x66/0x80 [nf_tables]
  nf_hook_slow+0x44/0xc0
  ip_rcv+0xb5/0xd0
  ? ip_rcv_finish_core.isra.19+0x360/0x360
  __netif_receive_skb_one_core+0x52/0x70
  netif_receive_skb_internal+0x34/0xe0
  napi_gro_receive+0xba/0xe0
  e1000_clean_rx_irq+0x1e9/0x420 [e1000e]
  e1000e_poll+0xbe/0x290 [e1000e]
  net_rx_action+0x149/0x3b0
  __do_softirq+0xde/0x2d8
  irq_exit+0xba/0xc0
  do_IRQ+0x85/0xd0
  common_interrupt+0xf/0xf
  </IRQ>
  RIP: 0010:nf_conncount_gc_list+0x3b/0x130 [nf_conncount]

Fixes: 2f971a8f4255 ("netfilter: nf_conncount: move all list iterations under spinlock")
Reported-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix txq null pointer dereference

[ Upstream commit 8ed31a264065ae92058ce54aa3cc8da8d81dc6d7 ]

If the interface type is P2P_DEVICE or NAN, read the file of
'/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a
NULL pointer dereference. As for those interface type, the
pointer sdata->vif.txq is NULL.

Unable to handle kernel NULL pointer dereference at virtual address 00000011
CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1
task: ffffffc0337e4880 task.stack: ffffff800cd20000
PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[...]
Process cat (pid: 30936, stack limit = 0xffffff800cd20000)
[...]
[<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211]
[<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211]
[<ffffff80082eff94>] full_proxy_read+0x2c/0x48
[<ffffff80081eef00>] __vfs_read+0x2c/0xd4
[<ffffff80081ef084>] vfs_read+0x8c/0x108
[<ffffff80081ef494>] SyS_read+0x40/0x7c

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/1569549796-8223-1-git-send-email-miaoqing@codeaurora.org
[trim useless data from commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: fix null pointer dereference

[ Upstream commit b501426cf86e70649c983c52f4c823b3c40d72a3 ]

If the interface is not in MESH mode, the command 'iw wlanx mpath del'
will cause kernel panic.

The root cause is null pointer access in mpp_flush_by_proxy(), as the
pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface.

Unable to handle kernel NULL pointer dereference at virtual address 00000068
[...]
PC is at _raw_spin_lock_bh+0x20/0x5c
LR is at mesh_path_del+0x1c/0x17c [mac80211]
[...]
Process iw (pid: 4537, stack limit = 0xd83e0238)
[...]
[<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211])
[<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat])
[<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c)
[<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac)
[<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34)
[<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204)
[<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370)
[<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84)
[<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228)
[<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70)
[<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44)
Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f)
---[ end trace bbd717600f8f884d ]---

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Link: https://lore.kernel.org/r/1569485810-761-1-git-send-email-miaoqing@codeaurora.org
[trim useless data from commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/efi: Set nonblocking callbacks

[ Upstream commit df359f0d09dc029829b66322707a2f558cb720f7 ]

Other parts of the kernel expect these nonblocking EFI callbacks to
exist and crash when running under Xen. Since the implementations of
xen_efi_set_variable() and xen_efi_query_variable_info() do not take any
locks, use them for the nonblocking callbacks too.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: dts: ar9331: fix interrupt-controller size

[ Upstream commit 0889d07f3e4b171c453b2aaf2b257f9074cdf624 ]

It is two registers each of 4 byte.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: qca8k: Use up to 7 ports for all operations

[ Upstream commit 7ae6d93c8f052b7a77ba56ed0f654e22a2876739 ]

The QCA8K family supports up to 7 ports. So use the existing
QCA8K_NUM_PORTS define to allocate the switch structure and limit all
operations with the switch ports.

This was not an issue until commit 0394a63acfe2 ("net: dsa: enable and
disable all ports") disabled all unused ports. Since the unused ports 7-11
are outside of the correct register range on this switch some registers
were rewritten with invalid content.

Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Fixes: a0c02161ecfc ("net: dsa: variable number of ports")
Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am4372: Set memory bandwidth limit for DISPC

[ Upstream commit f90ec6cdf674248dcad85bf9af6e064bf472b841 ]

Set memory bandwidth limit to filter out resolutions above 720p@60Hz to
avoid underflow errors due to the bandwidth needs of higher resolutions.

am43xx can not provide enough bandwidth to DISPC to correctly handle
'high' resolutions.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ieee802154: ca8210: prevent memory leak

[ Upstream commit 6402939ec86eaf226c8b8ae00ed983936b164908 ]

In ca8210_probe the allocated pdata needs to be assigned to
spi_device->dev.platform_data before calling ca8210_get_platform_data.
Othrwise when ca8210_get_platform_data fails pdata cannot be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190917224713.26371-1-navid.emamdoost@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()

[ Upstream commit cf395f7ddb9ebc6b2d28d83b53d18aa4e7c19701 ]

This code is currently unable to find the dts opp tables as ti-cpufreq
needs to set them up first based on speed binning.

We stopped initializing the opp tables with platform code years ago for
device tree based booting with commit 92d51856d740 ("ARM: OMAP3+: do not
register non-dt OPP tables for device tree boot"), and all of mach-omap2
is now booting using device tree.

We currently get the following errors on init:

omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu
omap2_set_init_voltage: unable to set vdd_mpu
omap2_set_init_voltage: unable to find boot up OPP for vdd_core
omap2_set_init_voltage: unable to set vdd_core
omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
omap2_set_init_voltage: unable to set vdd_iva

Let's just drop the unused code. Nowadays ti-cpufreq should be used to
to initialize things properly.

Cc: Adam Ford <aford173@gmail.com>
Cc: André Roth <neolynx@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP2+: Fix missing reset done flag for am3 and am43

[ Upstream commit 8ad8041b98c665b6147e607b749586d6e20ba73a ]

For ti,sysc-omap4 compatible devices with no sysstatus register, we do have
reset done status available in the SOFTRESET bit that clears when the reset
is done. This is documented for example in am437x TRM for DMTIMER_TIOCP_CFG
register. The am335x TRM just says that SOFTRESET bit value 1 means reset is
ongoing, but it behaves the same way clearing after reset is done.

With the ti-sysc driver handling this automatically based on no sysstatus
register defined, we see warnings if SYSC_HAS_RESET_STATUS is missing in the
legacy platform data:

ti-sysc 48042000.target-module: sysc_flags 00000222 != 00000022
ti-sysc 48044000.target-module: sysc_flags 00000222 != 00000022
ti-sysc 48046000.target-module: sysc_flags 00000222 != 00000022
...

Let's fix these warnings by adding SYSC_HAS_RESET_STATUS. Let's also
remove the useless parentheses while at it.

If it turns out we do have ti,sysc-omap4 compatible devices without a
working SOFTRESET bit we can set up additional quirk handling for it.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix unbound sleep in fcport delete path.

[ Upstream commit c3b6a1d397420a0fdd97af2f06abfb78adc370df ]

There are instances, though rare, where a LOGO request cannot be sent out
and the thread in free session done can wait indefinitely. Fix this by
putting an upper bound to sleep.

Link: https://lore.kernel.org/r/20190912180918.6436-3-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid: disable device when probe failed after enabled device

[ Upstream commit 70054aa39a013fa52eff432f2223b8bd5c0048f8 ]

For pci device, need to disable device when probe failed after enabled
device.

Link: https://lore.kernel.org/r/1567818450-173315-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: skip shutdown if hba is not powered

[ Upstream commit f51913eef23f74c3bd07899dc7f1ed6df9e521d8 ]

In some cases, hba may go through shutdown flow without successful
initialization and then make system hang.

For example, if ufshcd_change_power_mode() gets error and leads to
ufshcd_hba_exit() to release resources of the host, future shutdown flow
may hang the system since the host register will be accessed in unpowered
state.

To solve this issue, simply add checking to skip shutdown for above kind of
situation.

Link: https://lore.kernel.org/r/1568780438-28753-1-git-send-email-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: Fix a race in controller removal

[ Upstream commit b224726de5e496dbf78147a66755c3d81e28bdd2 ]

User space programs like udevd may try to read to partitions at the
same time the driver detects a namespace is unusable, and may deadlock
if revalidate_disk() is called while such a process is waiting to
enter the frozen queue. On detecting a dead namespace, move the disk
revalidate after unblocking dispatchers that may be holding bd_butex.

changelog Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.80

perf/hw_breakpoint: Fix arch_hw_breakpoint use-before-initialization

commit 310aa0a25b338b3100c94880c9a69bec8ce8c3ae upstream.

If we disable the compiler's auto-initialization feature, if
-fplugin-arg-structleak_plugin-byref or -ftrivial-auto-var-init=pattern
are disabled, arch_hw_breakpoint may be used before initialization after:

  9a4903dde2c86 ("perf/hw_breakpoint: Split attribute parse and commit")

On our ARM platform, the struct step_ctrl in arch_hw_breakpoint, which
used to be zero-initialized by kzalloc(), may be used in
arch_install_hw_breakpoint() without initialization.

Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alix Wu <alix.wu@mediatek.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Link: https://lkml.kernel.org/r/20190906060115.9460-1-mark-pk.tsai@mediatek.com
[ Minor edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: vmd: Fix config addressing when using bus offsets

commit e3dffa4f6c3612dea337c9c59191bd418afc941b upstream.

VMD maps child device config spaces to the VMD Config BAR linearly
regardless of the starting bus offset. Because of this, the config
address decode must ignore starting bus offsets when mapping the BDF to
the config space address.

Fixes: 2a5a9c9a20f9 ("PCI: vmd: Add offset to bus numbers if necessary")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Sushma Kalakota <sushmax.kalakota@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/asm: Fix MWAITX C-state hint value

commit 454de1e7d970d6bc567686052329e4814842867c upstream.

As per "AMD64 Architecture Programmer's Manual Volume 3: General-Purpose
and System Instructions", MWAITX EAX[7:4]+1 specifies the optional hint
of the optimized C-state. For C0 state, EAX[7:4] should be set to 0xf.

Currently, a value of 0xf is set for EAX[3:0] instead of EAX[7:4]. Fix
this by changing MWAITX_DISABLE_CSTATES from 0xf to 0xf0.

This hasn't had any implications so far because setting reserved bits in
EAX is simply ignored by the CPU.

 [ bp: Fixup comment in delay_mwaitx() and massage. ]

Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20191007190011.4859-1-Janakarajan.Natarajan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: Fix HWMON_P_MIN_ALARM mask

commit 30945d31e5761436d9eba6b8cff468a5f7c9c266 upstream.

Both HWMON_P_MIN_ALARM and HWMON_P_MAX_ALARM were using
BIT(hwmon_power_max_alarm).

Fixes: aa7f29b07c870 ("hwmon: Add support for power min, lcrit, min_alarm and lcrit_alarm")
CC: <stable@vger.kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20190924124945.491326-2-nuno.sa@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Get trace_array reference for available_tracers files

commit 194c2c74f5532e62c218adeb8e2b683119503907 upstream.

As instances may have different tracers available, we need to look at the
trace_array descriptor that shows the list of the available tracers for the
instance. But there's a race between opening the file and an admin
deleting the instance. The trace_array_get() needs to be called before
accessing the trace_array.

Cc: stable@vger.kernel.org
Fixes: 607e2ea167e56 ("tracing: Set up infrastructure to allow tracers for instances")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Get a reference counter for the trace_array on filter files

commit 9ef16693aff8137faa21d16ffe65bb9832d24d71 upstream.

The ftrace set_ftrace_filter and set_ftrace_notrace files are specific for
an instance now. They need to take a reference to the instance otherwise
there could be a race between accessing the files and deleting the instance.

It wasn't until the :mod: caching where these file operations started
referencing the trace_array directly.

Cc: stable@vger.kernel.org
Fixes: 673feb9d76ab3 ("ftrace: Add :mod: caching infrastructure to trace_array")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency

commit fc64e4ad80d4b72efce116f87b3174f0b7196f8e upstream.

max_latency is intended to record the maximum ever observed hardware
latency, which may occur in either part of the loop (inner/outer). So
we need to also consider the outer-loop sample when updating
max_latency.

Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu
Fixes: e7c15cd8a113 ("tracing: Added hardware latency tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/hwlat: Report total time spent in all NMIs during the sample

commit 98dc19c11470ee6048aba723d77079ad2cda8a52 upstream.

nmi_total_ts is supposed to record the total time spent in *all* NMIs
that occur on the given CPU during the (active portion of the)
sampling window. However, the code seems to be overwriting this
variable for each NMI, thereby only recording the time spent in the
most recent NMI. Fix it by accumulating the duration instead.

Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu
Fixes: 7b2c86250122 ("tracing: Add NMI tracing in hwlat detector")
Cc: stable@vger.kernel.org
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/sve: Fix wrong free for task->thread.sve_state

commit 4585fc59c0e813188d6a4c5de1f6976fce461fc2 upstream.

The system which has SVE feature crashed because of
the memory pointed by task->thread.sve_state was destroyed
by someone.

That is because sve_state is freed while the forking the
child process. The child process has the pointer of sve_state
which is same as the parent's because the child's task_struct
is copied from the parent's one. If the copy_process()
fails as an error on somewhere, for example, copy_creds(),
then the sve_state is freed even if the parent is alive.
The flow is as follows.

copy_process
        p = dup_task_struct
            => arch_dup_task_struct
                *dst = *src;  // copy the entire region.
:
        retval = copy_creds
        if (retval < 0)
                goto bad_fork_free;
:
bad_fork_free:
...
        delayed_free_task(p);
          => free_task
             => arch_release_task_struct
                => fpsimd_release_task
                   => __sve_free
                      => kfree(task->thread.sve_state);
                         // free the parent's sve_state

Move child's sve_state = NULL and clearing TIF_SVE flag
to arch_dup_task_struct() so that the child doesn't free the
parent's one.
There is no need to wait until copy_process() to clear TIF_SVE for
dst, because the thread flags for dst are initialized already by
copying the src task_struct.
This change simplifies the code, so get rid of comments that are no
longer needed.

As a note, arm64 used to have thread_info on the stack. So it
would not be possible to clear TIF_SVE until the stack is initialized.
From commit c02433dd6de3 ("arm64: split thread_info from task stack"),
the thread_info is part of the task, so it should be valid to modify
the flag from arch_dup_task_struct().

Cc: stable@vger.kernel.org # 4.15.x-
Fixes: bc0ee4760364 ("arm64/sve: Core task context handling")
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reported-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Suggested-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: stkwebcam: fix runtime PM after driver unbind

commit 30045f2174aab7fb4db7a9cf902d0aa6c75856a7 upstream.

Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.

Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.

Note that runtime PM has never actually been enabled for this driver
since the support_autosuspend flag in its usb_driver struct is not set.

Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter")
Cc: stable <stable@vger.kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191001084908.2003-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the locking in dcache_readdir() and friends

commit d4f4de5e5ef8efde85febb6876cd3c8ab1631999 upstream.

There are two problems in dcache_readdir() - one is that lockless traversal
of the list needs non-trivial cooperation of d_alloc() (at least a switch
to list_add_rcu(), and probably more than just that) and another is that
it assumes that no removal will happen without the directory locked exclusive.
Said assumption had always been there, never had been stated explicitly and
is violated by several places in the kernel (devpts and selinuxfs).

        * replacement of next_positive() with different calling conventions:
it returns struct list_head * instead of struct dentry *; the latter is
passed in and out by reference, grabbing the result and dropping the original
value.
        * scan is under ->d_lock.  If we run out of timeslice, cursor is moved
after the last position we'd reached and we reschedule; then the scan continues
from that place.  To avoid livelocks between multiple lseek() (with cursors
getting moved past each other, never reaching the real entries) we always
skip the cursors, need_resched() or not.
        * returned list_head * is either ->d_child of dentry we'd found or
->d_subdirs of parent (if we got to the end of the list).
        * dcache_readdir() and dcache_dir_lseek() switched to new helper.
dcache_readdir() always holds a reference to dentry passed to dir_emit() now.
Cursor is moved to just before the entry where dir_emit() has failed or into
the very end of the list, if we'd run out.
        * move_cursor() eliminated - it had sucky calling conventions and
after fixing that it became simply list_move() (in lseek and scan_positives)
or list_move_tail() (in readdir).

        All operations with the list are under ->d_lock now, and we do not
depend upon having all file removals done with parent locked exclusive
anymore.

Cc: stable@vger.kernel.org
Reported-by: "zhengbin (A)" <zhengbin13@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: topology: Use PPTT to determine if PE is a thread

Commit 98dc19902a0b2e5348e43d6a2c39a0a7d0fc639e upstream.

ACPI 6.3 adds a thread flag to represent if a CPU/PE is
actually a thread. Given that the MPIDR_MT bit may not
represent this information consistently on homogeneous machines
we should prefer the PPTT flag if its available.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Robert Richter <rrichter@marvell.com>
[will: made acpi_cpu_is_threaded() return 'bool']
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/PPTT: Add support for ACPI 6.3 thread flag

Commit bbd1b70639f785a970d998f35155c713f975e3ac upstream.

ACPI 6.3 adds a flag to the CPU node to indicate whether
the given PE is a thread. Add a function to return that
information for a given linux logical CPU.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Robert Richter <rrichter@marvell.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
[jpg: backport for 4.19, replace acpi_pptt_warn_missing()]
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags

Commit b5eab512e7cffb2bb37c4b342b5594e9e75fd486 upstream.

ACPICA commit c736ea34add19a3a07e0e398711847cd6b95affd

Link: https://github.com/acpica/acpica/commit/c736ea34
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: elf_hwcap: Export userspace ASEs

commit 38dffe1e4dde1d3174fdce09d67370412843ebb5 upstream.

A Golang developer reported MIPS hwcap isn't reflecting instructions
that the processor actually supported so programs can't apply optimized
code at runtime.

Thus we export the ASEs that can be used in userspace programs.

Reported-by: Meng Zhuo <mengzhuo1203@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org
Cc: Paul Burton <paul.burton@mips.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Disable Loongson MMI instructions for kernel build

commit 2f2b4fd674cadd8c6b40eb629e140a14db4068fd upstream.

GCC 9.x automatically enables support for Loongson MMI instructions when
using some -march= flags, and then errors out when -msoft-float is
specified with:

  cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’

The kernel shouldn't be using these MMI instructions anyway, just as it
doesn't use floating point instructions. Explicitly disable them in
order to fix the build with GCC 9.x.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3702bba5eb4f ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E")
Fixes: 6f7a251a259e ("MIPS: Loongson: Add basic Loongson 2F support")
Fixes: 5188129b8c9f ("MIPS: Loongson-3: Improve -march option and move it to Platform")
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org # v2.6.32+
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix O_DIRECT accounting of number of bytes read/written

commit 031d73ed768a40684f3ca21992265ffdb6a270bf upstream.

When a series of O_DIRECT reads or writes are truncated, either due to
eof or due to an error, then we should return the number of contiguous
bytes that were received/sent starting at the offset specified by the
application.

Currently, we are failing to correctly check contiguity, and so we're
failing the generic/465 in xfstests when the race between the read
and write RPCs causes the file to get extended while the 2 reads are
outstanding. If the first read RPC call wins the race and returns with
eof set, we should treat the second read RPC as being truncated.

Reported-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Fixes: 1ccbad9f9f9bd ("nfs: fix DIO good bytes calculation")
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix uninitialized ret in ref-verify

commit c5f4987e86f6692fdb12533ea1fc7a7bb98e555a upstream.

Coverity caught a case where we could return with a uninitialized value
in ret in process_leaf.  This is actually pretty likely because we could
very easily run into a block group item key and have a garbage value in
ret and think there was an errror.  Fix this by initializing ret to 0.

Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: fd708b81d972 ("Btrfs: add a extent ref verify tool")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix incorrect updating of log root tree

commit 4203e968947071586a98b5314fd7ffdea3b4f971 upstream.

We've historically had reports of being unable to mount file systems
because the tree log root couldn't be read.  Usually this is the "parent
transid failure", but could be any of the related errors, including
"fsid mismatch" or "bad tree block", depending on which block got
allocated.

The modification of the individual log root items are serialized on the
per-log root root_mutex.  This means that any modification to the
per-subvol log root_item is completely protected.

However we update the root item in the log root tree outside of the log
root tree log_mutex.  We do this in order to allow multiple subvolumes
to be updated in each log transaction.

This is problematic however because when we are writing the log root
tree out we update the super block with the _current_ log root node
information.  Since these two operations happen independently of each
other, you can end up updating the log root tree in between writing out
the dirty blocks and setting the super block to point at the current
root.

This means we'll point at the new root node that hasn't been written
out, instead of the one we should be pointing at.  Thus whatever garbage
or old block we end up pointing at complains when we mount the file
system later and try to replay the log.

Fix this by copying the log's root item into a local root item copy.
Then once we're safely under the log_root_tree->log_mutex we update the
root item in the log_root_tree.  This way we do not modify the
log_root_tree while we're committing it, fixing the problem.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: use cifsInodeInfo->open_file_lock while iterating to avoid a panic

commit cb248819d209d113e45fed459773991518e8e80b upstream.

Commit 487317c99477 ("cifs: add spinlock for the openFileList to
cifsInodeInfo") added cifsInodeInfo->open_file_lock spin_lock to protect
the openFileList, but missed a few places where cifs_inode->openFileList
was enumerated.  Change these remaining tcon->open_file_lock to
cifsInodeInfo->open_file_lock to avoid panic in is_size_safe_to_change.

[17313.245641] RIP: 0010:is_size_safe_to_change+0x57/0xb0 [cifs]
[17313.245645] Code: 68 40 48 89 ef e8 19 67 b7 f1 48 8b 43 40 48 8d 4b 40 48 8d 50 f0 48 39 c1 75 0f eb 47 48 8b 42 10 48 8d 50 f0 48 39 c1 74 3a <8b> 80 88 00 00 00 83 c0 01 a8 02 74 e6 48 89 ef c6 07 00 0f 1f 40
[17313.245649] RSP: 0018:ffff94ae1baefa30 EFLAGS: 00010202
[17313.245654] RAX: dead000000000100 RBX: ffff88dc72243300 RCX: ffff88dc72243340
[17313.245657] RDX: dead0000000000f0 RSI: 00000000098f7940 RDI: ffff88dd3102f040
[17313.245659] RBP: ffff88dd3102f040 R08: 0000000000000000 R09: ffff94ae1baefc40
[17313.245661] R10: ffffcdc8bb1c4e80 R11: ffffcdc8b50adb08 R12: 00000000098f7940
[17313.245663] R13: ffff88dc72243300 R14: ffff88dbc8f19600 R15: ffff88dc72243428
[17313.245667] FS:  00007fb145485700(0000) GS:ffff88dd3e000000(0000) knlGS:0000000000000000
[17313.245670] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[17313.245672] CR2: 0000026bb46c6000 CR3: 0000004edb110003 CR4: 00000000007606e0
[17313.245753] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[17313.245756] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[17313.245759] PKRU: 55555554
[17313.245761] Call Trace:
[17313.245803]  cifs_fattr_to_inode+0x16b/0x580 [cifs]
[17313.245838]  cifs_get_inode_info+0x35c/0xa60 [cifs]
[17313.245852]  ? kmem_cache_alloc_trace+0x151/0x1d0
[17313.245885]  cifs_open+0x38f/0x990 [cifs]
[17313.245921]  ? cifs_revalidate_dentry_attr+0x3e/0x350 [cifs]
[17313.245953]  ? cifsFileInfo_get+0x30/0x30 [cifs]
[17313.245960]  ? do_dentry_open+0x132/0x330
[17313.245963]  do_dentry_open+0x132/0x330
[17313.245969]  path_openat+0x573/0x14d0
[17313.245974]  do_filp_open+0x93/0x100
[17313.245979]  ? __check_object_size+0xa3/0x181
[17313.245986]  ? audit_alloc_name+0x7e/0xd0
[17313.245992]  do_sys_open+0x184/0x220
[17313.245999]  do_syscall_64+0x5b/0x1b0

Fixes: 487317c99477 ("cifs: add spinlock for the openFileList to cifsInodeInfo")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: stm32-adc: fix a race when using several adcs with dma and irq

[ Upstream commit dcb10920179ab74caf88a6f2afadecfc2743b910 ]

End of conversion may be handled by using IRQ or DMA. There may be a
race when two conversions complete at the same time on several ADCs.
EOC can be read as 'set' for several ADCs, with:
- an ADC configured to use IRQs. EOCIE bit is set. The handler is normally
  called in this case.
- an ADC configured to use DMA. EOCIE bit isn't set. EOC triggers the DMA
  request instead. It's then automatically cleared by DMA read. But the
  handler gets called due to status bit is temporarily set (IRQ triggered
  by the other ADC).
So both EOC status bit in CSR and EOCIE control bit must be checked
before invoking the interrupt handler (e.g. call ISR only for
IRQ-enabled ADCs).

Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: stm32-adc: move registers definitions

[ Upstream commit 31922f62bb527d749b99dbc776e514bcba29b7fe ]

Move STM32 ADC registers definitions to common header.
This is precursor patch to:
- iio: adc: stm32-adc: fix a race when using several adcs with dma and irq

It keeps registers definitions as a whole block, to ease readability and
allow simple access path to EOC bits (readl) in stm32-adc-core driver.

Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-source

[ Upstream commit e735244e2cf068f98b6384681a38993e0517a838 ]

When emulating open-drain/open-source by not actively driving the output
lines - we're simply changing their mode to input. This is wrong as it
will then make it impossible to change the value of such line - it's now
considered to actually be in input mode. If we want to still use the
direction_input() callback for simplicity then we need to set FLAG_IS_OUT
manually in gpiod_direction_output() and not clear it in
gpio_set_open_drain_value_commit() and
gpio_set_open_source_value_commit().

Fixes: c663e5f56737 ("gpio: support native single-ended hardware drivers")
Cc: stable@vger.kernel.org
Reported-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Bartosz: backported to v5.3, v4.19]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: google: increment VPD key_len properly

[ Upstream commit 442f1e746e8187b9deb1590176f6b0ff19686b11 ]

Commit 4b708b7b1a2c ("firmware: google: check if size is valid when
decoding VPD data") adds length checks, but the new vpd_decode_entry()
function botched the logic -- it adds the key length twice, instead of
adding the key and value lengths separately.

On my local system, this means vpd.c's vpd_section_create_attribs() hits
an error case after the first attribute it parses, since it's no longer
looking at the correct offset. With this patch, I'm back to seeing all
the correct attributes in /sys/firmware/vpd/...

Fixes: 4b708b7b1a2c ("firmware: google: check if size is valid when decoding VPD data")
Cc: <stable@vger.kernel.org>
Cc: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20190930214522.240680-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>