Lokesh Gupta [Tue, 15 Nov 2011 14:24:37 +0000 (15:24 +0100)]
[PORT FROM R2] atomisp: Provide a debug trace infra for CSS using ftrace
BZ: 17272
ftrace is the preferred way to dump debug traces in the kernel
because it is much more efficient than kernel printk. This patch
allows the use of ftrace to dump debug information from CSS. A new
API has also been added to CSS to set the verbosity level of the
traces.
Change-Id: I1edf61ca38d9931430dcaca3e1dc9e9d09585fd4
Orig-Change-Id: I8698a4c277052e95dc52c488e2d1d0f56e0080c8
Signed-off-by: Lokesh Gupta <lokesh.gupta@intel.com>
Reviewed-on: http://android.intel.com:8080/24621
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Toivonen, Tuukka <tuukka.toivonen@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28014
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Lokesh Gupta [Sat, 19 Nov 2011 13:27:13 +0000 (14:27 +0100)]
[PORT FROM R2] atomisp: Camera crash when switch resolution after color correction
BZ: 17272
When selecting color correction (sky | grass), and then taking
successive pictures at different resolutions caused the camera to
crash. This patch fixes the bug.
Change-Id: I3b2f738081049e3d1412b622d9caf1f9fd47c142
Orig-Change-Id: I49adf7c246ec328d0b5e8aa4cf517b8dae6e9e90
Signed-off-by: Lokesh Gupta <lokesh.gupta@intel.com>
Reviewed-on: http://android.intel.com:8080/24617
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Gerasimow, Timo <timo.gerasimow@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28013
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
ziyux.jiang [Thu, 17 Nov 2011 13:59:57 +0000 (21:59 +0800)]
[PORT FROM R2] atomisp: camera burst capture speed stability issue.
BZ: 17272
previous yuv-ds algorithm is that the yuv-ds is enabled when
sensor.width > out.width*(1+10%) or sensor.height > out.height*(1+10%).
if that, 6M will be cropped first and then did yuv-ds.
so now we change yuv-ds algorithm to be that the yuv-ds is enabled
when sensor.width > out.width*(1+10%) and sensor.height > out.height*(1+10%).
if that, 6M only will be cropped and no yuv-ds is needed.
Change-Id: If0fbec87b03c8f600df1c6c58ac040af1d51cd10
Orig-Change-Id: I72026f545cf0feee958d357dc59ba4b38f760207
Signed-off-by: ziyux.jiang <ziyux.jiang@intel.com>
Reviewed-on: http://android.intel.com:8080/24347
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Hu, Gang A <gang.a.hu@intel.com>
Reviewed-by: Tao, Jing <jing.tao@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28012
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Lokesh Gupta [Fri, 11 Nov 2011 10:30:35 +0000 (11:30 +0100)]
[PORT FROM R2] atomisp: CSS tried to free memory that was already freed
BZ: 17272
Some pointers within the CSS code were not being initialized
and reset correctly, due to which memory allocation/free-up
caused warnings. This patch fixes these cases. A new function
is added to properly uninitialize the sh_css_sp module.
Change-Id: I885a7aeb2b77197562bc468a673c2653cc30f3fc
Orig-Change-Id: I98370340392d3b7aca2f5c63403d3fbfe17164bd
Signed-off-by: Lokesh Gupta <lokesh.gupta@intel.com>
Reviewed-on: http://android.intel.com:8080/23911
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Toivonen, Tuukka <tuukka.toivonen@intel.com>
Reviewed-by: Von Oerthel, Jurgen <jurgen.von.oerthel@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28011
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
ziyux.jiang [Tue, 15 Nov 2011 17:47:08 +0000 (01:47 +0800)]
[PORT FROM R2] atomisp: Fix related failure check.
BZ: 17272
when frame allocation or others fail, we should return related error messages
instead of doing nothing.
Change-Id: I99ad6d5b721e5dcba7132cec3d68866c3e042717
Orig-Change-Id: I3199519ef7a0b6ca1ad01f6184671e43a30a06f6
Signed-off-by: ziyux.jiang <ziyux.jiang@intel.com>
Reviewed-on: http://android.intel.com:8080/24108
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Hu, Gang A <gang.a.hu@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Zhang, Xiaolin <xiaolin.zhang@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28010
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Daewoo Kim [Tue, 15 Nov 2011 02:24:23 +0000 (03:24 +0100)]
[PORT FROM R2] atomisp: implement chroma enhancement
BZ: 17272
Implement chroma enhancement
Change-Id: If76501d47d1faf1787f9d69c26438ec3d3afbfc0
Orig-Change-Id: I7aaf6a71e90f342d2d6de7eafe9e90260475364f
Signed-off-by: Daewoo Kim <daewoo.kim@intel.com>
Reviewed-on: http://android.intel.com:8080/24078
Reviewed-by: Gupta, Lokesh <lokesh.gupta@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28009
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Yoshio Wada [Wed, 16 Nov 2011 09:43:11 +0000 (10:43 +0100)]
[PORT FROM R2] atomisp: shading table interpolation is not correct when output is larger than input
BZ: 17272
Change-Id: Icdac356e75c47e89103e6d364c4b5e731c100c0f
Orig-Change-Id: I5aee14fe00ca3784269e6c8ae70152e05a67cf2c
Signed-off-by: Yoshio Wada <yoshio.wada@intel.com>
Reviewed-on: http://android.intel.com:8080/24213
Reviewed-by: Kantola, Lasse <lasse.kantola@intel.com>
Reviewed-by: Finnila, Tapio <tapio.finnila@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28008
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Lokesh Gupta [Tue, 15 Nov 2011 14:24:37 +0000 (15:24 +0100)]
[PORT FROM R2] atomisp: improved format of debug info for CSS
BZ: 17272
When ISP timeout happens, it is possible to dump the debug
information from ISP. This patch improves the format of this
dump. Major improvements:
- FIFO states are now correct, bugs fixed in code
- FIFO states from ISP to GDC are also printed now
- Change in CSS API to pass context info for debug
Change-Id: I550f6951f1189a924cebe2b0267d6627352e13b0
Orig-Change-Id: I3cf80dcd2ba4ed4301285cac734b0a0d99126a13
Reviewed-on: http://android.intel.com:8080/24397
Reviewed-by: Gupta, Lokesh <lokesh.gupta@intel.com>
Reviewed-by: Von Oerthel, Jurgen <jurgen.von.oerthel@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Toivonen, Tuukka <tuukka.toivonen@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28007
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Timo Gerasimow [Thu, 17 Nov 2011 08:48:38 +0000 (10:48 +0200)]
[PORT FROM R2] atomisp: Fine tune color enhancement tables
BZ: 17272
Skin whitening, enhance grass and enhance sky MACC tables fine tuned in order to have better color reproduction.
Change-Id: I177bae3236c96e4adea4b842e1f8ac1ad60d09a3
Orig-Change-Id: I479c628fd98c698d2470470b4c6c496c6d34388f
Signed-off-by: Timo Gerasimow <timo.gerasimow@intel.com>
Reviewed-on: http://android.intel.com:8080/24355
Reviewed-by: buildbot <buildbot@intel.com>
Reviewed-by: Kantola, Lasse <lasse.kantola@intel.com>
Reviewed-by: Wada, Yoshio <yoshio.wada@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Finnila, Tapio <tapio.finnila@intel.com>
Reviewed-on: http://android.intel.com:8080/28006
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: buildbot <buildbot@intel.com>
ziyux.jiang [Tue, 8 Nov 2011 17:53:07 +0000 (01:53 +0800)]
[PORT FROM R2] atomisp: Fix memory leak in pages allocation failure.
BZ: 17272
to atomisp driver memory allocation, when processing pages
allocation fail, we should do related free.
Change-Id: Ie4071da207f5c52a175209b4889425097f1b4ff2
Orig-Change-Id: I5c51b7e07c6bd3713c669c3bd47de16365ce9bea
Signed-off-by: ziyux.jiang <ziyux.jiang@intel.com>
Reviewed-on: http://android.intel.com:8080/23551
Reviewed-by: buildbot <buildbot@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Hu, Gang A <gang.a.hu@intel.com>
Reviewed-on: http://android.intel.com:8080/28005
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Lokesh Gupta [Tue, 15 Nov 2011 20:33:48 +0000 (21:33 +0100)]
[PORT FROM R2] atomisp: CSS/FW release from 20111115_0600 baseline
BZ: 17272
A white line on the right side of frame when double click the
screen to zoom 16x. This release fixes this issue.
Change-Id: I77b8ea0ac7e20c558ead3cfd3010e4377cd03c13
Orig-Change-Id: I5cdb439a14c0cc3b6f6cc8425019169453a2be60
Signed-off-by: Lokesh Gupta <lokesh.gupta@intel.com>
Reviewed-on: http://android.intel.com:8080/24138
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28004
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
David Cohen [Thu, 3 Nov 2011 12:04:07 +0000 (14:04 +0200)]
[PORT FROM R2] atomisp: mt9e013: disable sensor's LSC
BZ: 17272
Atomisp driver is now using it's own shading table correction. Sensor's
table is no longer needed.
Change-Id: Ifa74f2fe2c05aa7bb4f9784c007789f13833a952
Orig-Change-Id: I3c60f8401defb9f547fceb90fc8c425f936f9631
Signed-off-by: David Cohen <david.a.cohen@intel.com>
Reviewed-on: http://android.intel.com:8080/23049
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28003
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Tao Jing [Tue, 8 Nov 2011 02:46:13 +0000 (10:46 +0800)]
[PORT FROM R2] atomisp: drop frame according firmware information
BZ: 17272
Firmware will set irq info to SH_CSS_IRQ_INFO_INVALID_FIRST_FRAME if
the this frame is invalid. Atomisp will skip this frame.
Change-Id: Ice6fc26bb517ccb4214cdc6c171f8e4de2010a3a
Orig-Change-Id: Iaf8560a851384942f4f66dc9ffda1798886f04f2
Signed-off-by: Tao Jing <jing.tao@intel.com>
Reviewed-on: http://android.intel.com:8080/23509
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Hu, Gang A <gang.a.hu@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28002
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Lokesh Gupta [Fri, 4 Nov 2011 11:57:36 +0000 (12:57 +0100)]
[PORT FROM R2] atomisp: first frame of output video binary is bad
BZ: 17272
The first frame from video binary is always bad because video
binary has a two stage pipeline. With this patch, the CSS layer
informs the driver layer about an invalid frame using the
interrupt info
Change-Id: I1beb51fc9de8cf02522e9a84aa1badbc04e0ab95
Orig-Change-Id: Ic7d7e9119f04d9fa1555d812e954ed250905ef8b
Signed-off-by: Lokesh Gupta <lokesh.gupta@intel.com>
Reviewed-on: http://android.intel.com:8080/23187
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Tao, Jing <jing.tao@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28001
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
David Cohen [Wed, 2 Nov 2011 19:35:36 +0000 (21:35 +0200)]
[PORT FROM R2] atomisp: set sensor's binning factor to ISP before streaming
BZ: 17272
When Atomisp changes sensor's format, it needs to ask for sensor's
binning factor which necessary for internal operations. This patch
implements such functionality.
Change-Id: I0a2f47f58da270c6f62b08c6f3d4534da17e0113
Orig-Change-Id: Id5754ad893b0e91628f6407b650f0532cb6fc52f
Signed-off-by: David Cohen <david.a.cohen@intel.com>
Reviewed-on: http://android.intel.com:8080/22979
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/28000
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
David Cohen [Wed, 2 Nov 2011 19:34:55 +0000 (21:34 +0200)]
[PORT FROM R2] atomisp: mt9e013: add binning factor CID support
BZ: 17272
Sensor mt9e013 needs to inform binning factor to ISP. This patch adds
proper CID to its interface.
Change-Id: I3630955cd022f9f599992c3be9aa8eb7970a7dd2
Orig-Change-Id: I6e24ad230d73acd5cd1fe3d2053537419c78274e
Signed-off-by: David Cohen <david.a.cohen@intel.com>
Reviewed-on: http://android.intel.com:8080/22978
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27999
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tao Jing [Fri, 11 Nov 2011 08:35:06 +0000 (16:35 +0800)]
[PORT FROM R2] Revert "atomisp: add CSS support for atomic ISP restart"
BZ: 17272
This reverts commit
5b8f28334198de27e20e0001e927dffd8fcf57bb.
Change-Id: Ie10d52ee66a88957ea870a0f75edff11d554481e
Orig-Change-Id: I68fdd2a80b0cf7f58e6abd5f254d609ad7cd32e3
Signed-off-by: Tao Jing <jing.tao@intel.com>
Reviewed-on: http://android.intel.com:8080/23893
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Zhang, Xiaolin <xiaolin.zhang@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27998
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
David Cohen [Wed, 26 Oct 2011 17:12:00 +0000 (20:12 +0300)]
[PORT FROM R2] atomisp: add load shading table interface
BZ: 17272
This patch adds to Atomisp driver interface to load shading table from
userspace.
Change-Id: Ie1b58b8215660c7b972c292f3f817e24ddd013fe
Orig-Change-Id: I6a1c34a899f1afc8e5ec1c384791e957992ff422
Signed-off-by: David Cohen <david.a.cohen@intel.com>
Signed-off-by: Miikka Tuppurainen <miikka.tuppurainen@intel.com>
Reviewed-on: http://android.intel.com:8080/22559
Reviewed-by: Wada, Yoshio <yoshio.wada@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27997
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Lokesh Gupta [Thu, 3 Nov 2011 19:57:40 +0000 (20:57 +0100)]
[PORT FROM R2] atomisp: shading table re-interpolation trigger
BZ: 17272
When the shading table is changed or the binning factor is changed
the shading table should be reset for all modes (preview, capture
and video). This will enforce shading table re-interpolation when
these modes are started.
Change-Id: I72f2db2fff40cde7fdedd8a0d74aeab33d9656bd
Orig-Change-Id: If376c4734a7a159dd6b19b919844c18b24d60b31
Signed-off-by: Lokesh Gupta <lokesh.gupta@intel.com>
Reviewed-on: http://android.intel.com:8080/23093
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27996
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Lokesh Gupta [Wed, 9 Nov 2011 15:52:05 +0000 (16:52 +0100)]
[PORT FROM R2] atomisp: CSS/FW release 09-Nov-2011
BZ: 17272
This CSS/FW release addresses the following issues:
- Capture at 8MP 15fps for formats up to yuv422
Change-Id: I77e900ad74b80ea09910cf8ef2d670b833fbe7ea
Orig-Change-Id: If48f98c9551149999b21b0fa7c9d9ebf8c933fc5
Signed-off-by: Lokesh Gupta <lokesh.gupta@intel.com>
Reviewed-on: http://android.intel.com:8080/23761
Reviewed-by: Le Thenaff, Erwan <erwan.le.thenaff@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Zhang, Xiaolin <xiaolin.zhang@intel.com>
Reviewed-by: Govindapillai, Vinod <vinod.govindapillai@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27995
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
David Cohen [Wed, 2 Nov 2011 09:38:28 +0000 (11:38 +0200)]
[PORT FROM R2] atomisp: ISR and workqueue are out of sync
BZ: 17272
Atomisp's ISR sets isp->irq_infos everytime an interrupt happens
overwritting previous value. If workqueue didn't have time to check
previous interrupt, the driver will ignore it. This patch fixes this
issue.
Change-Id: Ie905e5dbc924c187f9c47bdffc70ae6a3443080a
Orig-Change-Id: I1706ada8ef53ec4d447cd184c7a232a7cb96e3ab
Signed-off-by: David Cohen <david.a.cohen@intel.com>
Reviewed-on: http://android.intel.com:8080/23195
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27994
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
David Cohen [Mon, 7 Nov 2011 17:50:47 +0000 (19:50 +0200)]
[PORT FROM R2] atomisp: optimize atomisp_acc_get_fw/index() to satisfy klockwork
BZ: 17272
Due to a (not well optimized) logic Klockwork doesn't understand, it is
complaining about possible memory leak. This patch changes/optimizes
this logic to make Klockwork happier.
Change-Id: Ife10eb9f0aec2a164b93f28d29ae0a72c62e7bc6
Orig-Change-Id: Ie303427f4d16486f268940745b73692fa5d781f8
Signed-off-by: David Cohen <david.a.cohen@intel.com>
Reviewed-on: http://android.intel.com:8080/23490
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Zhang, Xiaolin <xiaolin.zhang@intel.com>
Reviewed-by: Hu, Gang A <gang.a.hu@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27993
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
zheng.zixiang [Wed, 2 Nov 2011 10:19:02 +0000 (18:19 +0800)]
[PORT FROM R2] atomisp: Address Klocwork critical issue in drivers
BZ: 17272
Fix Klocwork critical issue that index of 'sh_css_blob_info'
may be out of bounds.
Signed-off-by: zheng.zixiang <zixiangx.zheng@intel.com>
Change-Id: Ib80656441fd1f5d18cc93dc9560e95b6ef70bed2
Orig-Change-Id: I71c9e1becc8d82d2f058002c1fe65630848de73c
Signed-off-by: zheng.zixiang <zixiangx.zheng@intel.com>
Signed-off-by: ziyux.jiang <ziyux.jiang@intel.com>
Reviewed-on: http://android.intel.com:8080/22951
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Reviewed-by: Kruger, Jozef <jozef.kruger@intel.com>
Reviewed-by: Zhang, Xiaolin <xiaolin.zhang@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27992
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Robert Jong-A-Lock [Tue, 1 Nov 2011 13:58:43 +0000 (14:58 +0100)]
[PORT FROM R2] atomisp: make delay in focus_status function variable
BZ: 17272
this change assumes that one step needs 1ms of delay.The ammount
of steps changed times 1ms, maximised to 40ms, is then used to
wait before the focus_status function returns
ATOMISP_FOCUS_HP_COMPLETE again. This way the delay is no longer
fixed to 60ms after each call to t_focus.
Change-Id: Ie8ce0ecffff8933d1b91341741f6ff7e934a2a1d
Orig-Change-Id: Ia0419de7d14418dc63da8b1ab61988e36edaffa2
Reviewed-on: http://android.intel.com:8080/22864
Reviewed-by: Jong-a-lock, Robert <robert.jong-a-lock@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Samurov, Vitali <vitali.samurov@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27991
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
David Cohen [Wed, 19 Oct 2011 12:41:04 +0000 (15:41 +0300)]
[PORT FROM R2] atomisp: avoid concurrent access of hrt_isp_css_mm_set_user_ptr()
BZ: 17272
Function hrt_isp_css_mm_alloc() depends on global variables set by
hrt_isp_css_mm_set_user_ptr() which creates need to use both functions
in sequence by same user.
As accel API uses it concurrently with atomisp_qbuf(), it causes a
possible racing condition between both.
This patch creates a new way to call hrt_isp_css_mm_alloc() without needing
to set global variables. Accel API makes use of this new way avoiding the
possible racing condition.
Change-Id: If8f4c1bb60e647b1973856ebdd1ea3a7e31648b6
Orig-Change-Id: I16e59afb336c395392fa3fca899d58a690875eb2
Signed-off-by: David Cohen <david.a.cohen@intel.com>
Reviewed-on: http://android.intel.com:8080/23196
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Gupta, Lokesh <lokesh.gupta@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Reviewed-by: Le Thenaff, Erwan <erwan.le.thenaff@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27990
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Jianxu zheng [Tue, 1 Nov 2011 04:22:11 +0000 (12:22 +0800)]
[PORT FROM R2] lm3554: correct flash behavior when receive msic signal
BZ: 17272
This patch changed the behavior when receive msic signal.With this patch
lm3554 driver will not take TX1/TX2 signal as an error. Because MSIC will not turn off flash,
but turn to torch mode according to gsm modem signal by hardware.
Also correct an error which make the flash brightness opposite to the setting.
Change-Id: I40e8b90e2bf5d677989701b2f837a850394fc086
Orig-Change-Id: Iedf0358bb11bcb2939672f9e671ffc50a72311c7
Signed-off-by: Jianxu zheng <jian.xu.zheng@intel.com>
Reviewed-on: http://android.intel.com:8080/22829
Reviewed-by: Toivonen, Tuukka <tuukka.toivonen@intel.com>
Reviewed-by: Yang, Ji <ji.yang@intel.com>
Reviewed-by: Wang, Wen W <wen.w.wang@intel.com>
Tested-by: Koski, Anttu <anttu.koski@intel.com>
Reviewed-by: Cohen, David A <david.a.cohen@intel.com>
Reviewed-by: Viry, RenaudX <renaudx.viry@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Reviewed-on: http://android.intel.com:8080/27989
Reviewed-by: Tuominen, TeemuX <teemux.tuominen@intel.com>
Reviewed-by: Koski, Anttu <anttu.koski@intel.com>
Samu Onkalo [Fri, 18 Nov 2011 08:58:01 +0000 (10:58 +0200)]
[PORT FROM R2] sound: Add wakelock to jack detection interrupts
BZ: 17287
If the jack detection interrupt comes after the user processes are
freezed the interrupt is handled but the audio routings are not
done. Suspend operation must be aborted in that case.
Take wakelock for one second when the headset related interrupt comes.
Machine driver doesn't know when the operation is finished so it
can't unlock the wakelock. Timed wakelock is a simple way to
handle this although is not perfect one.
Change-Id: I762ebc083d64b8e0cd0ebf06ab48b768fd1faf9a
Old-Change-Id: I32cbdeee422e44a52c4fa7c5ccda973d00efd8c3
Signed-off-by: Samu Onkalo <samu.onkalo@intel.com>
Reviewed-on: http://android.intel.com:8080/27796
Reviewed-by: Barthes, FabienX <fabienx.barthes@intel.com>
Tested-by: Barthes, FabienX <fabienx.barthes@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Prabu Renganathan [Mon, 12 Dec 2011 16:19:32 +0000 (08:19 -0800)]
pmu: add kernel config for MDFLD
BZ: 17326
Added config option to enable/disable PMU driver for easy debug
and -Werror to force fix warnings
Change-Id: I7fa241c670f9fc4deade451a3d92750b7fbc9105
Signed-off-by: Prabu Renganathan <prabu.renganathan@intel.com>
Reviewed-on: http://android.intel.com:8080/27242
Reviewed-by: Mansoor, Illyas <illyas.mansoor@intel.com>
Reviewed-by: Mai, Leonard <leonard.mai@intel.com>
Tested-by: Martin, LoicX <loicx.martin@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Liu, DongxingX [Tue, 13 Dec 2011 13:57:18 +0000 (21:57 +0800)]
usb/android_gadget: get serial string from emmc card cid
BZ: 16897
This patch gets serial string from emmc card cid instead of
default serial string.
Signed-off-by: Liu, DongxingX <dongxingx.liu@intel.com>
Change-Id: I7c7e74fd74372e4dc799627f2989b2962b225d67
Reviewed-on: http://android.intel.com:8080/27194
Reviewed-by: Liu, DongxingX <dongxingx.liu@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Wu, Hao <hao.wu@intel.com>
Tested-by: Dong, Chuanxiao <chuanxiao.dong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
jzhuan5 [Tue, 6 Dec 2011 20:57:01 +0000 (15:57 -0500)]
usb/penwell: change VBUS draw settings in i386_mfld_defconfig
BZ: 16022
ported from R2.
Set VBUS DRAW and SUPEND VBUS DRAW to 500.
Change-Id: I40506a4d3d941d9573f553a9b969ce4e951d5386
Signed-off-by: jzhuan5 <jin.can.zhuang@intel.com>
Reviewed-on: http://android.intel.com:8080/26928
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Dong, Chuanxiao <chuanxiao.dong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
jzhuan5 [Fri, 2 Dec 2011 16:18:17 +0000 (11:18 -0500)]
usb/penwell: serveral host client transceiver patches to K30
BZ: 16022
Patches below are ported, numbers below are bug numbers:
5644 OTG Clean up patch
3595 UDC CDP charging patch
13730 Mass Storage Gadget
7699 OTG: Host
11795 OTG: Penwell
11795 USB: Kconfig
12288 Host
12119 OTG: Host
12205 UDC
12284 OTG
11703 Mass Storage Gadget
2404 USB Host R1
9917 UDC
9109 UDC
822 RNDIS Performance
5645 fastboot
3150 Jiffies
976 fastboot dual config
833 Gadget
USB: Add USB otg test device support
f16a5c42c2b7823e8278d5ca553754c500f0dec4
usb: enable fastboot (Jack Ren)
693a0ffc09439fce00d2baf39f88e14521ee7a5e
Change-Id: I41daf828960b4fc2c0ea8f635d3cb5f410d64945
Signed-off-by: jzhuan5 <jin.can.zhuang@intel.com>
Reviewed-on: http://android.intel.com:8080/26927
Reviewed-by: Yang, Fei <fei.yang@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Dong, Chuanxiao <chuanxiao.dong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Wu, Hao [Mon, 28 Nov 2011 18:01:08 +0000 (02:01 +0800)]
i386_mfld_defconfig: enable USB HID support
BZ: 15520
This patch enabled HID support in default config file.
Change-Id: I1e2f25ce8a7b89d150d595e4a575d3bab5761228
Signed-off-by: Wu, Hao <hao.wu@intel.com>
Reviewed-on: http://android.intel.com:8080/26926
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Zhuang, Jin Can <jin.can.zhuang@intel.com>
Tested-by: Dong, Chuanxiao <chuanxiao.dong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
jzhuan5 [Fri, 9 Dec 2011 03:08:52 +0000 (22:08 -0500)]
usb:makefile: adjust the otg item in makefile
BZ: 15492
The current position of otg item causes ehci driver being loaded
before otg driver, due to which, USB Host function is not available.
Thus, adjust it to the right place.
Change-Id: I0710b8c91525c7207a501476cc213b1b0a333e3a
Signed-off-by: jzhuan5 <jin.can.zhuang@intel.com>
Reviewed-on: http://android.intel.com:8080/26925
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Dong, Chuanxiao <chuanxiao.dong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Wu, Hao [Mon, 28 Nov 2011 18:06:13 +0000 (02:06 +0800)]
usb/penwell: enable USB Host function in config
BZ: 15492
Patch enabled USB Host function in config for R3, including EHCI support.
Change-Id: I641c5ff9b6bc151419d02843610a64207181e93f
Signed-off-by: Wu, Hao <hao.wu@intel.com>
Reviewed-on: http://android.intel.com:8080/26924
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Zhuang, Jin Can <jin.can.zhuang@intel.com>
Tested-by: Dong, Chuanxiao <chuanxiao.dong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Wu, Hao [Thu, 13 Oct 2011 19:04:25 +0000 (03:04 +0800)]
usb/penwell_otg: hold wake_lock for OTG A device states
BZ: 15492
This patch is used to hold wake_lock to prevent S3 state which
USB will be in D3. Some OTG A device state needs to keep USB in
D0 state, so add this protection.
R2 BZ: 12119
Change-Id: I16267c4b360bfc819f38d3e5a1c509acf03878b3
Signed-off-by: Wu, Hao <hao.wu@intel.com>
Reviewed-on: http://android.intel.com:8080/26923
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Zhuang, Jin Can <jin.can.zhuang@intel.com>
Tested-by: Dong, Chuanxiao <chuanxiao.dong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Wu, Hao [Mon, 28 Nov 2011 18:16:31 +0000 (02:16 +0800)]
usb/penwell: Port USB Host patches to K30
BZ: 15492
Port USB Host related patches from R3 to R3(K30). It includes below
patches:
linux-2.6.35-ac-2010-08-24.patch
usb: ehci: add power budget limitation for penwell
linux-2.6.35-usb-ehci-langwell-pci-add-transceiver-driver-inter.patch
usb: ehci-pci: add SRAM initialization code for S0i3 exit
usb: ehci-hub: Clear PHCD before resuming
Bug fixing patches for 5382/5549/7166.
Change-Id: I3f57bcba7a2ef024b7b57d10405b339026fc1a58
Signed-off-by: Wu, Hao <hao.wu@intel.com>
Reviewed-on: http://android.intel.com:8080/26922
Reviewed-by: Zhuang, Jin Can <jin.can.zhuang@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Tang, Richard <richard.tang@intel.com>
Tested-by: Dong, Chuanxiao <chuanxiao.dong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Denis Robert [Tue, 13 Dec 2011 13:45:05 +0000 (14:45 +0100)]
[PORT FROM R2] n_gsm.c: avoid race condition in network interface
BZ: 15922
When the RIL ask (via iotcl) to delete the network interface, if a userland proc
ess is transfering, the xmit function can be called while the interface is delet
ed.
The interface is now stopped before deleting it.
Move from linux-2.6/drivers/char to linux-2.6/drivers/tty
Change-Id: If8e4ad645f6f048ec9b90eb225ef414acf009316
Orig-change-Id: I1e3c9881a7e9e50e30d9d2ac46cfdff4b758b532
Signed-off-by: Vincent Pillet <vincentx.pillet@intel.com>
Signed-off-by: Denis Robert <denis.robert@intel.com>
Reviewed-on: http://android.intel.com:8080/27176
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Predon, Frederic <frederic.predon@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Zhang Dongxing [Tue, 23 Aug 2011 07:09:17 +0000 (15:09 +0800)]
panic_handle: dump logcat buffer when kernel panic happened
BZ: 17216
We also dump the existing logcat buffer data into emmc and just copy
the dumped data back to logcat buffer after system reboot. Then we
can use logcat command to retrieve the dumpped log data.
Change-Id: Id7afab9ded5e4d84e7791ea42b573560261701a4
Signed-off-by: Zhang Dongxing <dongxing.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/26997
Reviewed-by: Guerard, Christophe <christophe.guerard@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Zhang Dongxing [Tue, 26 Jul 2011 02:33:41 +0000 (10:33 +0800)]
panic handle: Stream call trace into emmc
BZ: 17214
Once kernel panic happened, we will save all call stack of all
threads into __log_buf and then we will write it to emmc panic
partition. With the increase of thread count, we need more
large__log_buf. It will waste more RAM buffer.
We stream the call trace from __log_buf into emmc panic
partition without allocating more RAM buffer. Once there is
some call trace logged in __log_buf, we will write all into emmc.
Change-Id: I7293c80fdadfee056694a9e1a548e2f17e955e61
Signed-off-by: Zhang Dongxing <dongxing.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/26996
Reviewed-by: Guerard, Christophe <christophe.guerard@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Yanmin Zhang [Mon, 13 Jun 2011 03:32:07 +0000 (11:32 +0800)]
panic_handle: Add a debugfs entry to disable/enable emmc ipanic manually
BZ: 17477
emmc ipanic feature would dump the task kernel stacks of all processes.
That erases all the log_buf usually. Although emmc ipanic writes the info
to storage, but it's not good for living debugging using ITP or other
debug tools. We want to check sys log and other info such like
specific variables and memory, when the panic happens.
This patch adds disable_emmc_ipanic, a new debugfs entry. To disable
emmc ipanic manually:
The patch also adds a boot parameter disable_emmc_ipanic which can be used
when kernel panic at booting.
By default, disable_emmc_ipanic==0.
Change-Id: I2642d2a28a1e6838fb65bc4811b701fe87bdd6ae
Signed-off-by: Yanmin Zhang <yanmin.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/26995
Reviewed-by: Guerard, Christophe <christophe.guerard@intel.com>
Tested-by: Zhang, Dongxing <dongxing.zhang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Zhang Dongxing [Tue, 24 May 2011 00:36:11 +0000 (08:36 +0800)]
Panic_handle: fix all warning messages.
BZ: 17212
remove all of compiling warnings.
Change-Id: I8f9f5d1ae9314b510d0ab9695bc36d1d95a71c56
Signed-off-by: Zhang Dongxing <dongxing.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/26994
Reviewed-by: Guerard, Christophe <christophe.guerard@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
liu chuansheng [Tue, 17 May 2011 08:33:51 +0000 (16:33 +0800)]
panic_handle: Save kernel msg into EMMC when kernel panic FOR NEW OPTION
BZ: 17212
Adding a new option for enabling the emmc panic handler
Change-Id: I2838e2e7291ca46c4525f3d7b63ef9371a4c8d53
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Reviewed-on: http://android.intel.com:8080/26993
Reviewed-by: Guerard, Christophe <christophe.guerard@intel.com>
Tested-by: Zhang, Dongxing <dongxing.zhang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
liu chuansheng [Mon, 16 May 2011 13:28:55 +0000 (21:28 +0800)]
panic_handle: Save kernel msg into EMMC when kernel panic
BZ: 17212
Adding the new panic handler emmc_ipanic, when panic happened,
the emmc ipanic will save the log buffer and thread info into
emmc emergency partiton.
Change-Id: I59d58b303d7df6e26040bb9da883225b7c3d0713
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Reviewed-on: http://android.intel.com:8080/26992
Reviewed-by: Guerard, Christophe <christophe.guerard@intel.com>
Tested-by: Zhang, Dongxing <dongxing.zhang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Shijie Zhang [Fri, 16 Dec 2011 00:23:17 +0000 (08:23 +0800)]
[Port from R2-stable] Intel Keypad LED driver patches
BZ: 17581
This BZ includes the following BZ:
10361, 13071, 13148, 13751, 14636, 14411, 15649
Change-Id: I801658043354cd0de3f680425e63790c6c5fd040
Signed-off-by: Shijie Zhang <shijie.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/27709
Reviewed-by: Du, Alek <alek.du@intel.com>
Reviewed-by: Yang, Bin <bin.yang@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Li, Ning [Thu, 15 Dec 2011 11:32:30 +0000 (19:32 +0800)]
[PORT FROM R2] IPC Driver Patches
BZ: 17485
This BZ includes the following BZs:
10321, 11749, 8773, 9027, 9446, 9459, 10685, 14922, 16961, 16789
Change-Id: I6b5463d15c4fc0e41efe47c4d64ec0d66613ff6b
Signed-off-by: Li, Ning <ning.li@intel.com>
Reviewed-on: http://android.intel.com:8080/27703
Reviewed-by: Yang, Bin <bin.yang@intel.com>
Reviewed-by: Du, Alek <alek.du@intel.com>
Reviewed-by: Zhang, Shijie <shijie.zhang@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Pierre Tardy [Wed, 14 Dec 2011 17:15:46 +0000 (18:15 +0100)]
AndroidKernel.mk: forward job server information kernel build script
BZ: 16664
when building the kernel there are two independant job server that runs at
the same time, that could lead to double the number of // jobs
Change-Id: I0d9be7a75dfe4fd2a22325b8e4d62cf27aa134a2
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
Reviewed-on: http://android.intel.com:8080/27344
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Philippe Skowronski [Thu, 15 Dec 2011 13:24:07 +0000 (14:24 +0100)]
[PORT FROM R2] GPIO controller driver
BZ: 16830
This BZ includes BZ:
3216
Change-Id: Ie47d733938e185b8c714233fcade1c08ff37b3e8
Signed-off-by: Philippe Skowronski <philippe.skowronski@intel.com>
Reviewed-on: http://android.intel.com:8080/27624
Reviewed-by: Chotard, Celine <celine.chotard@intel.com>
Tested-by: Chotard, Celine <celine.chotard@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leo Yan [Tue, 13 Dec 2011 07:11:32 +0000 (15:11 +0800)]
ltr502als.c: Port patches from GB
BZ: 17031
This patch inclues fixing for the following bugs:
BZ 16176: Obviate incorrect PS interrupt
BZ 13626: Reduce intergation circles and enhance adc-lux conversion
BZ 10605: workaround for proximity sensor do not work on first boot issue
BZ 13733: Add GPL header in the code file
Change-Id: I81b73662115d421d7a002a79d096e8a87590ec4a
Signed-off-by: Leo Yan <leo.yan@intel.com>
Reviewed-on: http://android.intel.com:8080/27132
Reviewed-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: Du, Alek <alek.du@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leo Yan [Thu, 15 Dec 2011 00:57:45 +0000 (08:57 +0800)]
touchscreen: Port patches from GB
BZ: 17031
This patch inclues fixing for the following bugs:
BZ 12527:
0001-atmel_mxt224-config-data-change-to-improve-stability.patch
0002-atmel_mxt224-disable-auto-calibration-after-calibrat.patch
BZ 11001:
0003-atmel_mxt224-remove-reset-when-cycle-overflow.patch
BZ 13372:
0004-atmel_mxt224-lower-touch-threshold-to-improve-touch-.patch
Change-Id: I6e2c336fec71a9bbbc194ea1cdbcb502534411dc
Signed-off-by: Leo Yan <leo.yan@intel.com>
Reviewed-on: http://android.intel.com:8080/27427
Reviewed-by: Du, Alek <alek.du@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Li, Ning [Wed, 14 Dec 2011 07:32:02 +0000 (15:32 +0800)]
[PORT FROM GB] I2C patches
BZ: 17357
This BZ includes the following BZ:
15120, 13176
Change-Id: I9762daad766811cf87379aa2fa33ce8d418987c7
Signed-off-by: Li, Ning <ning.li@intel.com>
Reviewed-on: http://android.intel.com:8080/27295
Reviewed-by: Du, Alek <alek.du@intel.com>
Reviewed-by: Yang, Bin <bin.yang@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Li, Ning [Tue, 13 Dec 2011 05:46:49 +0000 (13:46 +0800)]
[PORT FROM R2] ADC driver patches
BZ: 17163
This BZ includes the following BZ:
11047, 10427, 12458, 13583, 15827
Change-Id: Ifb5bb6736820beec875157d67fd54f90bad85364
Signed-off-by: Li, Ning <ning.li@intel.com>
Reviewed-on: http://android.intel.com:8080/27160
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Du, Alek <alek.du@intel.com>
Reviewed-by: Koskinen, Ilkka <ilkka.koskinen@intel.com>
Reviewed-by: Zhang, Shijie <shijie.zhang@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Seema Pandit [Wed, 7 Dec 2011 16:50:41 +0000 (08:50 -0800)]
Adding ctp_pr0 build variant.
BZ: 16707
Change-Id: Ie668feee1fc50807f9a5ebc97d14fe213df0de46
Signed-off-by: Seema Pandit <seema.pandit@intel.com>
Reviewed-on: http://android.intel.com:8080/26875
Reviewed-by: Seibel, Eric <eric.seibel@intel.com>
Tested-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Christophe Guerard [Mon, 12 Dec 2011 16:28:44 +0000 (17:28 +0100)]
[LOG] PTI not enabled on kernel 3.0
BZ: 16865
Change-Id: Ie3e9f41cad62ab72c7051ea899f24668519748c1
Signed-off-by: Christophe Guerard <christophe.guerard@intel.com>
Reviewed-on: http://android.intel.com:8080/27068
Reviewed-by: Chotard, Celine <celine.chotard@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leonard Mai [Wed, 30 Nov 2011 15:20:14 +0000 (07:20 -0800)]
intel_scu_ipc: add cloverview support
BZ: 16713
Cloverview SOC use different PCI Device ID for IPC hence existing IPC
driver won't be successfully probed on Cloverview SOC.
Clovertrail Phone is using Avondale Cove PMIC (TI PSNB5072A) which is
derivative of the TI MSIC chip used on Medfield with reduced capabilities.
All PMIC registers ofsets on Avondale Cove PMIC are compatible with TI MSIC.
This patch adds IPC probing and support for Cloverview SOC.
Change-Id: I1a5cd363aafd1da6eb8c6445c0fb60c584827fc4
Signed-off-by: Leonard D Mai <leonard.mai@intel.com>
Reviewed-by: Pierre Tardy <pierre.tardy@intel.com>
Reviewed-by: Mark Gross <mark.gross@intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Bin Yang <bin.yang@intel.com>
Tested-by: Siva Prasath Ponnusamy <siva.prasath.ponnusamy@intel.com>
Reviewed-on: http://android.intel.com:8080/26620
Reviewed-by: Yang, Bin <bin.yang@intel.com>
Reviewed-by: Yang, Fei <fei.yang@intel.com>
Reviewed-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: Du, Alek <alek.du@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leonard Mai [Wed, 30 Nov 2011 20:20:19 +0000 (12:20 -0800)]
i2c: add cloverview support
BZ: 16711
Cloverview SOC use different PCI Device IDs for I2C controllers hence
existing Medfield I2C driver won't be loaded on Cloverview SOC.
This patch adds I2C probing support for Cloverview SOC
Change-Id: I5f26899c141e09ddf420db160b678882234e6dfa
Signed-off-by: Leonard D Mai <leonard.mai@intel.com>
Reviewed-by: Pierre Tardy <pierre.tardy@intel.com>
Reviewed-by: Mark Gross <mark.gross@intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Bin Yang <bin.yang@intel.com>
Tested-by: Siva Prasath Ponnusamy <siva.prasath.ponnusamy@intel.com>
Reviewed-on: http://android.intel.com:8080/26622
Reviewed-by: Yang, Bin <bin.yang@intel.com>
Reviewed-by: Yang, Fei <fei.yang@intel.com>
Reviewed-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: Du, Alek <alek.du@intel.com>
Reviewed-by: Ponnusamy, Siva Prasath <siva.prasath.ponnusamy@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leonard Mai [Sat, 19 Nov 2011 16:29:18 +0000 (08:29 -0800)]
mmc: adding mmc and sdio support for cloverview
BZ: 16722
Cloverview SOC use different PCI Device IDs for eMMC/SDIO controllers
hence existing eMMC/SDIO driver won't be initialized on Cloverview SOC.
This patch adds eMMC and SDIO probing support for Cloverview SOC. Also,
Cloverview does not support eMMC mutex as comparing to Penwell hence not
to expose the Dekker's mutex mechanism for Cloverview.
Change-Id: I47927feef3c6cc62acc0c5912e1e2e8d7c0c7f2c
Signed-off-by: Leonard D Mai <leonard.mai@intel.com>
Reviewed-by: Mark Gross <mark.gross@intel.com>
Reviewed-on: http://android.intel.com:8080/26618
Reviewed-by: Yang, Fei <fei.yang@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: Dong, Chuanxiao <chuanxiao.dong@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
chuanxiao.dong@intel.com [Fri, 9 Dec 2011 05:39:04 +0000 (13:39 +0800)]
mmc: sdhci: ignore CLV card detection support
BZ: 16895
CLV has different memery map with MFLD which can cause fabric error
if using the same rule with MFLD. And currently CLV didn't have runtime
pm, so we can disable SD gpio detection temporary for CLV
Change-Id: I10805f5338a232aa290e7f44ecaaed2a34ff44cb
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Reviewed-on: http://android.intel.com:8080/26658
Reviewed-by: Yang, Fei <fei.yang@intel.com>
Reviewed-by: Mai, Leonard <leonard.mai@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Randy Xu [Sun, 11 Dec 2011 11:17:20 +0000 (19:17 +0800)]
[Graphics/Display]: Port a bunch of patches from R2
BZ: 17008
This patch includes below bug fixing
0002-Gfx-Display-Enhance-DDC-to-read-extention-block-in-E.patch:BZ: 13176
0003-GFX-PM-Support-of-MIPIA-Display-OFF-during-video-pla.patch:BZ: 14855
0004-Gfx-Display-Fix-issue-for-MIPI-ERROR-fifo-is-not-emp.patch:BZ: 15147
0005-GFX-PM-fix-the-return-value-when-encoder-fail-to-pow.patch:BZ: 16150
0006-Solve-one-PM-issue-may-lead-to-Fabric-error.patch:BZ: 15373
Change-Id: Ia7cf3dc456df204489368dca3ff4e3a1f615bbec
Signed-off-by: Randy Xu <randy.xu@intel.com>
Signed-off-by: Tong Bo <box.tong@intel.com>
Reviewed-on: http://android.intel.com:8080/27125
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Guoqiang Cao [Sun, 11 Dec 2011 20:05:51 +0000 (12:05 -0800)]
Port over CTP patches from hc ddk-1.7 to ics-ddk-1.8
BZ: 13288
Port over CTP patches from hc ddk-1.7 to ics-ddk-1.8 which includes
several patches
Change-Id: I31a1e1820af228509f4f664015e7fda82526bb88
Signed-off-by: Guoqiang Cao <guoqiang.cao@intel.com>
Signed-off-by: Tong Bo <box.tong@intel.com>
Reviewed-on: http://android.intel.com:8080/27124
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Shijie Zhang [Fri, 28 Oct 2011 00:54:50 +0000 (08:54 +0800)]
[PORT FROM GB] Add support for dynamically adjusting volume during the call in S3 state
BZ: 13269
This patch fix the problem that can not adjust the volume during the
call in S3 state with screen off because of the proximity sensor. By
adding sysfs interface "enabled_wakeup" and "disabled_wakeup" in
gpio-keys to dynamically enable or disable the gpiokeys.
Change-Id: I80c45daca2999821502302998f76e0e54c806a68
Signed-off-by: Shijie Zhang <shijie.zhang@intel.com>
Reviewed-on: http://android.intel.com:8080/26773
Reviewed-by: Barthes, FabienX <fabienx.barthes@intel.com>
Tested-by: Barthes, FabienX <fabienx.barthes@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Hari Kanigeri [Thu, 8 Dec 2011 15:52:47 +0000 (07:52 -0800)]
mrst: process atmel_mxt224 from SFI table
BZ:16879
At present the atmel_mxt224 value is hard coded in blackbay_pr2.c
file. This value is already part of SFI table, and should make use
of this instead of using hard coded values.
changed the name of Atmel_mxt224 to mxt224 to match with the
name used in SFI table.
Change-Id: Ic86dbfc306cf28ef534bd8f6dd1e28da486af885
Signed-off-by: Hari Kanigeri <hari.k.kanigeri@intel.com>
Signed-off-by: Prabu Renganathan <prabu.renganathan@intel.com>
Reviewed-on: http://android.intel.com:8080/26863
Reviewed-by: Liu, Hong <hong.liu@intel.com>
Reviewed-by: Du, Alek <alek.du@intel.com>
Tested-by: Wang, Zhifeng <zhifeng.wang@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
John Ye [Fri, 9 Dec 2011 10:00:52 +0000 (18:00 +0800)]
apply pvrdbg flag to kernel space IMG DDK
BZ: 16943
The userspace DDK can be compiled to debug mode with flag pvrdbg=1,
however this did not affect the kernel DDK code.
This commit fixes this issue.
Change-Id: I73877360183badd3958cbd264130b3d776070135
Signed-off-by: John Ye <john.ye@intel.com>
Reviewed-on: http://android.intel.com:8080/26916
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: Hu, Austin <austin.hu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Austin Hu [Mon, 5 Dec 2011 10:04:13 +0000 (18:04 +0800)]
Gfx-Display: fixed the issue that HDMI can't show video playback with HW Composer.
BZ: 16345
When play video with HDMI by Gallery, overlay crashes because overlay plane size
(= HDMI sink device mode) exceeds DC source image size in aspect ratio mode.
Fixed the issue by setting HDMI default scaling mode to center. And Resoure Manager
can decide to set HDMI scaling to center before playing video via HDMI, to avoid
such issue.
Change-Id: I8cf42740962377125ac9ed631cd1fa828b57555f
Signed-off-by: Austin Hu <austin.hu@intel.com>
Reviewed-on: http://android.intel.com:8080/26915
Reviewed-by: Xu, Randy <randy.xu@intel.com>
Tested-by: Xu, Randy <randy.xu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Randy Xu [Sun, 11 Dec 2011 11:17:20 +0000 (19:17 +0800)]
[Graphics/Display]: Port a bunch of patches from R2
BZ: 17008
This patch includes below bug fixing
0002-GFX-3D-2D-using-private-queue-instead-of-common-work.patch:BZ:4306
0003-GFX-Display-fix-V_1P22_VCCAON_DSI-rail-high.patch:BZ: 6670
0004-GFX-PM-Enable-GL3-attributes-including-auto-clock-g.patch:BZ: 6371, 8403, 8405, 8406, 8407 & 8408
0005-GFX-Display-Added-ULPS-support-to-DPI-driver.patch:BZ: 9284
0006-GFX-Display-replaced-busy-waits-20ms-with-mslee.patch:BZ: 9440
0007--PORT-FROM-R1-GFX-Display-update-pr2-cabc-control.patch:BZ: 8544
0008--PORT-FROM-R1-Graphics-Display-SGX-HW-recovery-ca.patch:BZ: 10106
0009--GFX-Display-Not-change-the-panel-devInfo-when-cre.patch:BZ: 11873
0010-Gfx-Display-Refined-scaling-setting-to-support-Cent.patch:BZ: 11093
0011-GFX-Improve-HDMI-rotation-mechanism-kernel.patch:BZ: 10804, 11517, 10736
0012-Gfx-Display-Fix-vblank-enable-disable-defect-in-HDM.patch:BZ: 11434
0013-psb_drm-obsolet-fields-can-be-deleted-in-psb_drm.h.patch:BZ: 9354
0014-Graphics-restore-the-BCD-reference-count-in-case-of.patch:BZ: 11670
0015-Gfx-Display-sending-HDMI-audio-suspended-resumed-ue.patch:BZ: 12415
0016-GFX-Display-add-code-to-support-HDMI-compliance.patch:BZ: 5876, 5879
0017-GFX-display-update-HDMI-AVI-info-support-kernel.patch:BZ: 5877
0018-Gfx-Display-Modify-DPMS-to-just-turn-off-HDMI-plane.patch:BZ: 12541
0019-GFX-display-Add-a-ioctl-interface-for-HDMIpipe-enabl.patch:BZ: 12881, 12949
0020-GFX-Display-fix-mimic-mode-will-be-changed-during-m.patch:BZ: 5876
0021-Graphic-Solve-klocwork-review-defects-for-pvr.patch:BZ: 13836
0022-Gfx-Display-fix-issue-of-HDMI-could-not-get-i2c-ada.patch:BZ: 14013
0023-GFX-Display-fix-refresh-info-not-right-of-MIPI-mode.patch:BZ: 13941
0024-Gfx-Display-fix-the-issue-of-HDMI-hotplug-could-not.patch:BZ: 13917
0025-GFX-HDCP-port-I2C-address-change-to-0x3A-without-re.patch:BZ: 14427
0026-GFX-display-add-code-to-support-HDMI-set-power-stat.patch:BZ: 13944
0027-Gfx-Display-Fix-issue-of-music-does-not-restart-on.patch:BZ: 13987
0028-GFX-Display-enhancement-HDMI-compliance-test-support.patch:BZ: 14104, 14617, 14627
0029-GFX-HDMI-HDCP-Fix-HDCP-cann-t-be-enabled-disabled.patch:BZ: 13724
0030-GFX-Display-Fix-call-issue-when-connect-HDMI.patch:BZ: 13468
0031-GFX-display-fix-HDMI-corrupted-after-resume-from-r.patch:BZ: 13067
0032-Gfx-Display-fix-issue-of-incoming-call-display-on-H.patch:BZ: 14113
0033-Gfx-Display-Ensure-HDMI-clock-is-enabled-before-HDM.patch:BZ: 14156
0034-GFX-display-update-hdmi_state-usage.patch:BZ: 14097
0035-GFX-display-flush-the-plane-changes-when-disable-e.patch:BZ: 15146
0036-GFX-display-fix-hdmi-dpms-fabric-error.-for-R2.patch:BZ: 14884, 14091, 12933
0037-GFX-Display-fix-OVADD-fabric-error-hdmi-resume-fail.patch:BZ: 15667
0038-GFX-Display-fix-lost-video-when-upplug-HDMI.patch:BZ: 15527
Change-Id: I35d6304f3cd84c6f45d3ef4c23637e4e41a68f83
Signed-off-by: Randy Xu <randy.xu@intel.com>
Reviewed-on: http://android.intel.com:8080/26914
Reviewed-by: Hu, Austin <austin.hu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Sophia Gong [Thu, 1 Dec 2011 13:12:33 +0000 (21:12 +0800)]
Gfx-Display: fixed the issue that HDMI can't display in ICS.
BZ: 16029
HDMI encoder's detect callback doesn't go through the correct process
which checks HDMI connection status via MSIC and un-gates Display B
island, because the CONFIG_X86_MRST switch is turned off in ICS kernel
config.
Fixed the issue by using CONFIG_X86_MDFLD.
Note: as the HDMIObserver middleware hasn't been integrated into ICS,
we have to turn on HDMI by connecting it with PR2/3 during booting
system, or by using some libdrm based tools.
Change-Id: I031e3b6a108c36d0ba70ffcc8742fb5e31f1066a
Signed-off-by: Sophia Gong <sophia.gong@intel.com>
Reviewed-on: http://android.intel.com:8080/26682
Reviewed-by: Agarwal, Vaibhav <vaibhav.agarwal@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Randy Xu [Sun, 11 Dec 2011 11:02:12 +0000 (19:02 +0800)]
[Graphics]: Integrating the IMG DDK1.8 into ICS mainline
BZ: 16598
Upgrade to PVR DDK 1.8. The 1st set (changes under hardware/intel/linux-2.6/) of 4.
Graphics: PVR DDK 1.8 drop (ED 1.8.778983)
Feature enabled:
1. Surface Texture: GLES1/2_EXTENSION_EGL_IMAGE_EXTERNAL.
2. Pixel format: XRGB888; XBGR8888 & ABGR8888 are rendered via Skia (SW) rather than GPU with GL.
3. EGL_ANDROID_recordable: supports rendering to matching buffer formats that are suitable for feeding to an OpenMAX video encoder.
Feature disabled:
1. HWC HAL of PVR: integrated, but turned OFF (SUPPORT_ANDROID_REFERENCE_COMPOSER_HAL).
2. ION memory manager: integrated, turn OFF support for OMAP (CONFIG_ION_OMAP).
3. Composition Bypass mode: SUPPORT_ANDROID_COMPOSITION_BYPASS.
Change-Id: I5b1ad973d4454324e5194d3f8c05458aa7a3a9b8
Signed-off-by: John Ye <john.ye@intel.com>
Signed-off-by: Randy Xu <randy.xu@intel.com>
Reviewed-on: http://android.intel.com:8080/26913
Reviewed-by: Hu, Austin <austin.hu@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Chuanxiao Dong [Tue, 25 Oct 2011 12:20:33 +0000 (20:20 +0800)]
Panic: mmc: core: implement mmc panic ops
BZ: 16578
Port this patch from R2
Ops for panic driver to write kernel logs or user space logs into
eMMC card when panic happened.
Change-Id: I84b9e397bb12610a5a93454a0be63b90a99baccf
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Reviewed-on: http://android.intel.com:8080/26320
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Yang, Fei <fei.yang@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Chuanxiao Dong [Tue, 25 Oct 2011 12:27:00 +0000 (20:27 +0800)]
Panic: mmc: SDHCI: implement panic ops for MFLD SDHCI driver
BZ: 16578
Port this patch from R2
This patch will implement the panic ops for MFLD sdhci host driver.
The original sdhci host driver was using interrupt mode which is not
preferred in panic mode. So implemented another ops which will use
polling mode instead
Change-Id: I4d808405eadd7565141f3bf8e1531148e6c0fc9a
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Reviewed-on: http://android.intel.com:8080/26321
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Yang, Fei <fei.yang@intel.com>
Tested-by: Sun, Jianhua <jianhua.sun@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Vishwesh M Rudramuni [Fri, 25 Aug 2006 23:45:48 +0000 (05:15 +0530)]
mid_pmu/intel_idle: porting from r2 build
BZ: 15910
This contains all the changes for the intel idle & pmu driver
from the r2 build. The significant changes done are in pmu
driver to remove most of the global variables & adding a structure.
in intel_idle driver adding mfld_cstates & adding the target
residency based on the formula. lpmp3 issues & in general pmu code
clean up.
Change-Id: Iad0f396f438cf5cd42ad42fcd185b7149db28d16
Signed-off-by: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>
Reviewed-on: http://android.intel.com:8080/25692
Reviewed-by: Yang, Fei <fei.yang@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Vishwesh M Rudramuni [Fri, 1 Sep 2006 17:22:17 +0000 (22:52 +0530)]
apic: fixing the mwait hang issue during s3 exit
BZ: 16590
This patch was missed in the pmu driver s3 enabling. This is a very
important patch where we dont disable lapic when we are entering S3.
In cases where there is a mwait failure & scu aborts, pmu interrupt
will not be forwarded to IA as lapic is suspended & system will hang
with bothcpu's in mwait state. hence in this patch we try to have a
seperate lapic_suspend/resume routines specific to our platform.
Change-Id: I8903d353ea038280d6276f44c25e8b36fb2458bf
Signed-off-by: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>
Reviewed-on: http://android.intel.com:8080/26281
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leonard Mai [Mon, 28 Nov 2011 16:15:32 +0000 (08:15 -0800)]
mrst: add cpu detection and earlyprintk support for cloverview
BZ: 15575
Cloverview SOC use CPUID=0x30650 which translates x86_model to 0x35. The
Medfield kernel currently does not support this x86_model number hence
it won't be able to detect Cloverview SOC properly. Also, there is a memory
map change on Cloverview's SPI1 interface hence earlyprintk won't work on
Cloverview SOC.
This patch adds CPU detection and earlyprintk support for Cloverview SOC.
Change-Id: I1ce935aeee4b42a02b62e14c01682806d16e0acb
Signed-off-by: Leonard D Mai <leonard.mai@intel.com>
Reviewed-by: Pierre Tardy <pierre.tardy@intel.com>
Reviewed-by: Yong Yao <yong.yao@intel.com>
Tested-by: Siva Prasath Ponnusamy <siva.prasath.ponnusamy@intel.com>
Reviewed-on: http://android.intel.com:8080/25443
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leonard Mai [Mon, 28 Nov 2011 13:39:43 +0000 (05:39 -0800)]
hsi: add cloverview probing support
BZ: 15576
Cloverview SOC use different PCI Device ID for HSI hence existing Medfield
HSI driver won't be loaded on Cloverview SOC.
This patch add HSI probing support for Cloverview SOC
Change-Id: I58ae53c59b8d0405cf00469dcc48d87eb2774538
Signed-off-by: Leonard D Mai <leonard.mai@intel.com>
Reviewed-by: Pierre Tardy <pierre.tardy@intel.com>
Tested-by: Siva Prasath Ponnusamy <siva.prasath.ponnusamy@intel.com>
Reviewed-on: http://android.intel.com:8080/25445
Reviewed-by: Du, Alek <alek.du@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leonard Mai [Mon, 28 Nov 2011 17:39:58 +0000 (09:39 -0800)]
mfd: add probing support for cloverview
BZ: 15592
Cloverview SOC use different PCI Device ID for HS-UART hence existing
HS-UART driver won't be successfully probed on Cloverview SOC.
This patch adds HS-UART probing support for Cloverview SOC
Change-Id: Ic6ee5b73239445b81758a7dac26b2c5121fb472e
Signed-off-by: Leonard D Mai <leonard.mai@intel.com>
Tested-by: Siva Prasath Ponnusamy <siva.prasath.ponnusamy@intel.com>
Reviewed-on: http://android.intel.com:8080/25452
Reviewed-by: Yang, Bin <bin.yang@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Leonard Mai [Mon, 28 Nov 2011 13:53:27 +0000 (05:53 -0800)]
intel_mid_dma: add cloverview probing support
BZ: 15578
Cloverview SOC use different PCI Device ID for DMA hence existing
Medfield DMA driver won't be initialized on Cloverview SOC.
This patch adds GP-DMA/LPE-DMA probing support for Cloverview SOC
Change-Id: I837815f7d5a9f0f1ceae7a5f913456130ed621f4
Signed-off-by: Leonard D Mai <leonard.mai@intel.com>
Reviewed-by: Pierre Tardy <pierre.tardy@intel.com>
Tested-by: Siva Prasath Ponnusamy <siva.prasath.ponnusamy@intel.com>
Reviewed-on: http://android.intel.com:8080/25444
Reviewed-by: Seibel, Eric <eric.seibel@intel.com>
Tested-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Marc Blassin [Wed, 30 Nov 2011 14:36:44 +0000 (15:36 +0100)]
Browsing is not working
BZ: 15379
As ioctl in the tty_operations struct for kernel 3.0 requires only 3
parameters, the wrong signature in n_gsm (4 parameters) leads to an IOCTL
call to the MUX which is not handled correctly.
Because of this, the RIL is not able to request the network interface
creation to the MUX via the GSMIOC_ENABLE_NET IOCTL call, so 3G data browsing is not
possible as no network interface exists.
Change-Id: Ic2ef269b5f3f161448230e6fd88ba35b3537c133
Signed-off-by: Marc Blassin <marcx.blassin@intel.com>
Reviewed-on: http://android.intel.com:8080/25804
Reviewed-by: Seibel, Eric <eric.seibel@intel.com>
Tested-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Fei Yang [Wed, 30 Nov 2011 00:27:04 +0000 (16:27 -0800)]
intel_mid_i2s: fix runtime pm
BZ: 15772
PCI device drivers need this change due to runtime pm init
scheme change in Linux 3.0
Change-Id: I8051637114ebadcb236efd25a1a5029e66aacff4
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-on: http://android.intel.com:8080/25641
Reviewed-by: Le Gall, Louis <louis.le.gall@intel.com>
Reviewed-by: Pichon, SylvainX <sylvainx.pichon@intel.com>
Reviewed-by: Germond, Cyril <cyril.germond@intel.com>
Reviewed-by: Suet, NicolasX <nicolasx.suet@intel.com>
Reviewed-by: Barthes, FabienX <fabienx.barthes@intel.com>
Tested-by: Barthes, FabienX <fabienx.barthes@intel.com>
Reviewed-by: Centelles, Sylvain <sylvain.centelles@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Fabien Peix [Mon, 21 Nov 2011 16:15:35 +0000 (17:15 +0100)]
bluetooth: add tiwl1283 btwilink driver + updated TI ST
BZ: 15234
Merged from GB R2 K2.6.35 to Kernel 3.0.8
This is the btwilink driver along an updated version of
shared transport.
Change-Id: I3e099edd3865250b122867cea4c6dbfef4528b76
Signed-off-by: Fabien Peix <fabienx.peix@intel.com>
Reviewed-on: http://android.intel.com:8080/25350
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Sylvain Pichon [Fri, 25 Nov 2011 15:58:40 +0000 (16:58 +0100)]
Adding intel_mid_i2s drivers to kernel 3.0
BZ: 15712
Change-Id: Ie3671d54db65a99a1752e6db2a4c690e0d3c27b9
Signed-off-by: Sylvain Pichon <sylvainx.pichon@intel.com>
Reviewed-on: http://android.intel.com:8080/25553
Reviewed-by: Le Gall, Louis <louis.le.gall@intel.com>
Reviewed-by: Suet, NicolasX <nicolasx.suet@intel.com>
Reviewed-by: Seibel, Eric <eric.seibel@intel.com>
Tested-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Cyril Germond [Tue, 29 Nov 2011 11:10:52 +0000 (12:10 +0100)]
Audio: intel_sst inclusion path change.
BZ: 15668
As intel_sst driver location has changed, all components including intel_sst.h
must have the correct inclusion path.
Change-Id: Id0f9c9203cc8c965de7bc56f89e6b8edfd0685ec
Signed-off-by: Cyril Germond <cyril.germond@intel.com>
Reviewed-on: http://android.intel.com:8080/25548
Reviewed-by: Suet, NicolasX <nicolasx.suet@intel.com>
Reviewed-by: Pichon, SylvainX <sylvainx.pichon@intel.com>
Reviewed-by: Seibel, Eric <eric.seibel@intel.com>
Tested-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Ramesh Babu K V [Mon, 24 Oct 2011 09:46:29 +0000 (15:16 +0530)]
audio: port the non upstreamed changes
BZ: 15246
move staging sst to sound/
port sn95031 changes
port sst_platform and mfld_machine drv
port the intel-mid-dma driver
port the intel-sst driver
asoc:add ignore_pmdown_time flag to dai_link
(backport for k3.2)
Orignal commit log for asoc backport patch:
ASoC framework delays playback widget power down sequence
by 5 seconds. This delay is applicable for all the playback
streams. This delay is not required for voice dai's.
This patch adds ignore_pmdown_time flag to snd_soc_dai_link
structure. Each dai_link can choose to ignore the pmdown_time
based on board configuration.
commit ID in upstream asoc tree:
e50fad4f029c36ed85a71fe7413684cfd3c7d78c
Change-Id: I50c665d842730cdb5bb54fd1d39680ba3b1fcd5c
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Reviewed-on: http://android.intel.com:8080/25532
Reviewed-by: Suet, NicolasX <nicolasx.suet@intel.com>
Reviewed-by: Seibel, Eric <eric.seibel@intel.com>
Tested-by: Seibel, Eric <eric.seibel@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Wed, 23 Nov 2011 15:18:07 +0000 (16:18 +0100)]
regulator: Enable regulator support in kernel 3.0
BZ: 15061
The Wifi uses fixed regulator driver attached to mmc 2 slot.
Change-Id: I03f845be9ffde97202a5023eb4d2d97f02b47b6b
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25385
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Wed, 23 Nov 2011 10:59:23 +0000 (11:59 +0100)]
kernel: Adding wireless network support.
BZ: 15061
Add the configuration required to make the wifi enabled within the
Linux kernel.
Change-Id: Icdb6c27b49cb6e22625996d3e51d9a03a5f49805
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25384
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Tue, 22 Nov 2011 13:58:13 +0000 (14:58 +0100)]
lnw_gpio: Initialize the lnw driver using fs_initcall.
BZ: 15061
Platform dependent code requires the langwell gpio driver to be
initialized earlier to be able to request some GPIOs related to
WIFI.
Change-Id: I8d24b162b5852a7d4083d1c15850783ad5bcf119
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25383
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Tue, 22 Nov 2011 13:55:14 +0000 (14:55 +0100)]
kernel: enable CONFIG_RFKILL.
BZ: 15061
Enable full control of the Radio from the user space. Feature required
by some wifi applications.
Change-Id: Ic9e5276e84f2a30e4f7f1abc7c1b71b646b06127
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25382
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Tue, 22 Nov 2011 13:45:12 +0000 (14:45 +0100)]
sdhci: attach fixed regulator to sdhci host controller.
BZ: 15061
The WIFI requires a fixed regulator to enable / disable the chip.
So in the early device initialization, the regulator shall be requested
for the sdhci host controller.
Change-Id: I1e2b779c85f7cf14e2d24a3ed1bc651e8b0c8805
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25381
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Mon, 21 Nov 2011 18:24:42 +0000 (19:24 +0100)]
sdhci: Do not power off the mmc card when entering in S3.
BZ: 15061
Avoid enabling / disabling the regulator on suspend / resume.
The attached card shall remain powered by the regulator.
Change-Id: I5c848d911a27e9b0d19c5a37cf4ae60bcab77ccf
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25380
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Mon, 21 Nov 2011 18:22:11 +0000 (19:22 +0100)]
sdhci: Adding regulator support when setting mmc ios.
BZ: 15061
Enable / disable regulator when mmc ios is updated.
Change-Id: Ib9a0fa2b5399a000ef5e86adff49a4ef33e6c2d8
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25379
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Mon, 21 Nov 2011 18:16:18 +0000 (19:16 +0100)]
sdhci: Fix missing runtime_pm get/put.
BZ: 15061
make sure that card is powered on / off when required.
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Change-Id: I3c6183fa5ac85caf64f61048447ed2880c6c4828
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25378
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Mon, 21 Nov 2011 18:04:11 +0000 (19:04 +0100)]
kernel: Adding FLAGS required by the wifi.
BZ: 15061
Actually, the wifi driver is based on compat wireless modules that
requires WL12XX_PLATFORM_DATA to be enabled within the kernel. So
it shall be enabled by default with WL12XX.
The wifi uses two AON gpios and thus the wifi interrupt handler is
forwarded by the GPIO driver. So to prevent losing wifi interrupts,
HARDIRQS_SW_RESEND shall be used.
Change-Id: Ic61fd84cc2ef849e7b97bb90164e53b9f0ba944d
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25377
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Mon, 21 Nov 2011 16:29:42 +0000 (17:29 +0100)]
mrst: Initialize wl12xx platform data.
BZ: 15061
Perform Wifi platform data initialization.
Change-Id: I71f7bde84dcff44fb587c0c69bc021dd07264f6d
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25376
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Aymen Zayet [Mon, 21 Nov 2011 13:33:05 +0000 (14:33 +0100)]
sdhci: Adding new Quirk for the sdhci controller.
BZ: 15061
The SDHCI controller is not able to perform a soft reset on resume.
So SDHCI_QUIRK_CANNOT_KEEP_POWERCTL is added to reset completely the
sdhci controller rather than resetting CMD / DATA.
Without this quirk, the reset on resume will never complete and the
system hangs.
Change-Id: I00f46558624b5a65deb7f49cceec6dc2af7b37b4
Signed-off-by: Aymen Zayet <aymenx.zayet@intel.com>
Reviewed-on: http://android.intel.com:8080/25375
Reviewed-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Tested-by: Champciaux, NicolasX <nicolasx.champciaux@intel.com>
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: buildbot <buildbot@intel.com>
Deng BingX [Tue, 8 Mar 2011 01:22:39 +0000 (09:22 +0800)]
Audio: Headset detection.
Change-Id: I8245b11b2df3af3f2a0bca3eec6c1c3d4bdb185b
Signed-off-by: bdeng3X <bingx.deng@intel.com>
Reviewed-on: http://android.intel.com:8080/25152
Reviewed-by: buildbot <buildbot@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Gross, Mark <mark.gross@intel.com>
Deng BingX [Tue, 8 Mar 2011 01:24:45 +0000 (09:24 +0800)]
Audio: Add headset detcetion module config in i386_mfld_cdk_android_defconfig.
Change-Id: Id4c4afe0565cdaa0c5a3d6eeef36fc700b760842
Signed-off-by: bdeng3X <bingx.deng@intel.com>
Reviewed-on: http://android.intel.com:8080/25153
Reviewed-by: buildbot <buildbot@intel.com>
Tested-by: Gross, Mark <mark.gross@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Jackie Li [Wed, 23 Nov 2011 15:00:06 +0000 (23:00 +0800)]
gfx-gtt: enhanced GTT memory manager to support different buffer types.
This is patch 2/5 of HWC enabling.
Added three interfaces to GTT memory manager to support follow buffers:
1) all kinds of PVR meminfo
2) BCD buffer
3) user mode allocated buffer.
Change-Id: I9bdcd4f18cf01ab58976c495d51b0aa0a3d27583
Signed-off-by: Jackie Li <yaodong.li@intel.com>
Reviewed-on: http://android.intel.com:8080/25090
Reviewed-by: buildbot <buildbot@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Gross, Mark <mark.gross@intel.com>
Bin Yang [Mon, 21 Nov 2011 16:36:02 +0000 (16:36 +0000)]
Port I2C driver from current driver to k30
BZ: 15206
1. some differences of runtime PM implementation, including
auto runtime suspend.
2. one bug fixing in ISR.
3. add dump function for debugging.
4. correct clock setting.
Change-Id: Ib3d82e91333aa33bd319d5fed88389b15bd698fc
Signed-off-by: Bin Yang <bin.yang@intel.com>
Reviewed-on: http://android.intel.com:8080/25164
Reviewed-by: buildbot <buildbot@intel.com>
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Gross, Mark <mark.gross@intel.com>
Leonard Mai [Tue, 22 Nov 2011 19:46:57 +0000 (11:46 -0800)]
dw_spi_pci: add spi1 probing support for cloverview
BZ: 15092
Cloverview SOC use different PCI Device ID for SPIs hence existing
SPI driver won't be initialized on Cloverview SOC.
This patch adds SPI1 probing support for enabling Cloverview SOC.
Also, 0x0800 is the PCI device ID for SPI controller 1 on Penwell (not 0)
hence corrected the comment.
Change-Id: Ie0db4da6cf4f72f1ddb0ae4f53f029eec44f0f0d
Signed-off-by: Leonard D Mai <leonard.mai@intel.com>
Reviewed-by: Pierre Tardy <pierre.tardy@intel.com>
Tested-by: Siva Prasath Ponnusamy <siva.prasath.ponnusamy@intel.com>
Reviewed-on: http://android.intel.com:8080/25028
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Gross, Mark <mark.gross@intel.com>
Leonard Mai [Tue, 22 Nov 2011 20:00:54 +0000 (12:00 -0800)]
pti: add pti probing support for cloverview
BZ: 15091
Cloverview SOC use different PCI Device ID for PTI hence existing PTI
driver won't be loaded on Cloverview SOC.
This patch adds PTI probing support for Cloverview SOC
Change-Id: I16e5770e8019cb7357bd430809abf11e3e9b8ba5
Signed-off-by: Leonard D Mai <leonard.mai@intel.com>
Reviewed-by: Pierre Tardy <pierre.tardy@intel.com>
Tested-by: Siva Prasath Ponnusamy <siva.prasath.ponnusamy@intel.com>
Reviewed-on: http://android.intel.com:8080/25027
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Gross, Mark <mark.gross@intel.com>
Leonard Mai [Tue, 22 Nov 2011 20:05:43 +0000 (12:05 -0800)]
gpio: add cloverview probing support
BZ: 15089
Cloverview SOC use different PCI Device ID for GPIO hence existing Medfield
GPIO driver won't be initialized on Cloverview SOC.
This patch add GPIO probing support for Cloverview SOC.
Change-Id: Ibc46a51605726ff9ddd8ffccf793bece3beb4949
Signed-off-by: Leonard D Mai <leonard.mai@intel.com>
Reviewed-by: Pierre Tardy <pierre.tardy@intel.com>
Tested-by: Siva Prasath Ponnusamy <siva.prasath.ponnusamy@intel.com>
Reviewed-on: http://android.intel.com:8080/25026
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Gross, Mark <mark.gross@intel.com>
Tao Jing [Tue, 22 Nov 2011 06:30:12 +0000 (14:30 +0800)]
Port from k35: camera drivers updated to ww46
including the following patche:
http://android.intel.com:8080/#change,23169
http://android.intel.com:8080/#change,22968
http://android.intel.com:8080/#change,22967
http://android.intel.com:8080/#change,23022
http://android.intel.com:8080/#change,22679
http://android.intel.com:8080/#change,22832
http://android.intel.com:8080/#change,22073
http://android.intel.com:8080/#change,22984
http://android.intel.com:8080/#change,22895
Change-Id: I1b795471f52a791f9ef16ef34da75dee16f36f23
Signed-off-by: Tao Jing <jing.tao@intel.com>
Reviewed-on: http://android.intel.com:8080/24970
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Gross, Mark <mark.gross@intel.com>
Tao Jing [Tue, 22 Nov 2011 04:45:25 +0000 (12:45 +0800)]
Port from k35: camera drivers updated to ww45
including the following patches:
http://android.intel.com:8080/#change,22630
http://android.intel.com:8080/#change,22612
http://android.intel.com:8080/#change,22755
http://android.intel.com:8080/#change,22396
http://android.intel.com:8080/#change,21860
http://android.intel.com:8080/#change,22699
Change-Id: Iec91a5eb24d5bd3b7090a0f55170ce1d7064e237
Signed-off-by: Tao Jing <jing.tao@intel.com>
Reviewed-on: http://android.intel.com:8080/24969
Reviewed-by: Gross, Mark <mark.gross@intel.com>
Tested-by: Gross, Mark <mark.gross@intel.com>
projects / kernel / kernel-mfld-blackbay.git / log