crypto: ccree/des - switch to new verification routines

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp/des - switch to new verification routines

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nitrox/des - switch to new verification routines

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cpt/des - switch to new verification routines

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam/des - switch to new verification routines

Cc: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: bcm/des - switch to new verification routines

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: atmel/des - switch to new verification routines

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sparc/des - switch to new verification routines

Switch to the refactored DES key verification routines. While at it,
rename the DES encrypt/decrypt routines so they will not conflict with
the DES library later on.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: s390/des - switch to new verification routines

Switch to the refactored DES key verification routines. While at it,
rename the DES encrypt/decrypt routines so they will not conflict with
the DES library later on.

Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: des/3des_ede - add new helpers to verify keys

The recently added helper routine to perform key strength validation
of triple DES keys is slightly inadequate, since it comes in two versions,
neither of which are highly useful for anything other than skciphers (and
many drivers still use the older blkcipher interfaces).

So let's add a new helper and, considering that this is a helper function
that is only intended to be used by crypto code itself, put it in a new
des.h header under crypto/internal.

While at it, implement a similar helper for single DES, so that we can
start replacing the pattern of calling des_ekey() into a temp buffer
that occurs in many drivers in drivers/crypto.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MAINTAINERS: nx crypto: Fix typo in a filepath

Fix typo in nx_debugfs.c filepath. File extension changed from .h to .c
The file nx_debugfs.h never existed.

Cc: Breno Leitão <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

lib/mpi: Eliminate unused umul_ppmm definitions for MIPS

Clang errors out when building this macro:

lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast or build with
-fheinous-gnu-extensions
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:652:20: note: expanded from macro 'umul_ppmm'
        : "=l" ((USItype)(w0)), \
                ~~~~~~~~~~^~~
lib/mpi/generic_mpih-mul1.c:37:3: error: invalid output constraint '=h'
in asm
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ^
lib/mpi/longlong.h:653:7: note: expanded from macro 'umul_ppmm'
             "=h" ((USItype)(w1)) \
             ^
2 errors generated.

The C version that is used for GCC 4.4 and up works well with clang;
however, it is not currently being used because Clang masks itself
as GCC 4.2.1 for compatibility reasons. As Nick points out, we require
GCC 4.6 and newer in the kernel so we can eliminate all of the
versioning checks and just use the C version of umul_ppmm for all
supported compilers.

Link: https://github.com/ClangBuiltLinux/linux/issues/605
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

random: Support freezable kthreads in add_hwgenerator_randomness()

The kthread calling this function is freezable after commit 03a3bb7ae631
("hwrng: core - Freeze khwrng thread during suspend") is applied.
Unfortunately, this function uses wait_event_interruptible() but doesn't
check for the kthread being woken up by the fake freezer signal. When a
user suspends the system, this kthread will wake up and if it fails the
entropy size check it will immediately go back to sleep and not go into
the freezer. Eventually, suspend will fail because the task never froze
and a warning message like this may appear:

 PM: suspend entry (deep)
 Filesystems sync: 0.000 seconds
 Freezing user space processes ... (elapsed 0.001 seconds) done.
 OOM killer disabled.
 Freezing remaining freezable tasks ...
 Freezing of tasks failed after 20.003 seconds (1 tasks refusing to freeze, wq_busy=0):
 hwrng           R  running task        0   289      2 0x00000020
 [<c08c64c4>] (__schedule) from [<c08c6a10>] (schedule+0x3c/0xc0)
 [<c08c6a10>] (schedule) from [<c05dbd8c>] (add_hwgenerator_randomness+0xb0/0x100)
 [<c05dbd8c>] (add_hwgenerator_randomness) from [<bf1803c8>] (hwrng_fillfn+0xc0/0x14c [rng_core])
 [<bf1803c8>] (hwrng_fillfn [rng_core]) from [<c015abec>] (kthread+0x134/0x148)
 [<c015abec>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)

Check for a freezer signal here and skip adding any randomness if the
task wakes up because it was frozen. This should make the kthread freeze
properly and suspend work again.

Fixes: 03a3bb7ae631 ("hwrng: core - Freeze khwrng thread during suspend")
Reported-by: Keerthy <j-keerthy@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: arm64/aegis128 - implement plain NEON version

Provide a version of the core AES transform to the aegis128 SIMD
code that does not rely on the special AES instructions, but uses
plain NEON instructions instead. This allows the SIMD version of
the aegis128 driver to be used on arm64 systems that do not
implement those instructions (which are not mandatory in the
architecture), such as the Raspberry Pi 3.

Since GCC makes a mess of this when using the tbl/tbx intrinsics
to perform the sbox substitution, preload the Sbox into v16..v31
in this case and use inline asm to emit the tbl/tbx instructions.
Clang does not support this approach, nor does it require it, since
it does a much better job at code generation, so there we use the
intrinsics as usual.

Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aegis128 - provide a SIMD implementation based on NEON intrinsics

Provide an accelerated implementation of aegis128 by wiring up the
SIMD hooks in the generic driver to an implementation based on NEON
intrinsics, which can be compiled to both ARM and arm64 code.

This results in a performance of 2.2 cycles per byte on Cortex-A53,
which is a performance increase of ~11x compared to the generic
code.

Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aegis128 - add support for SIMD acceleration

Add some plumbing to allow the AEGIS128 code to be built with SIMD
routines for acceleration.

Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: xts - add support for ciphertext stealing

Add support for the missing ciphertext stealing part of the XTS-AES
specification, which permits inputs of any size >= the block size.

Cc: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aead - Do not allow authsize=0 if auth. alg has digestsize>0

Return -EINVAL on an attempt to set the authsize to 0 with an auth.
algorithm with a non-zero digestsize (i.e. anything but digest_null)
as authenticating the data and then throwing away the result does not
make any sense at all.

The digestsize zero exception is for use with digest_null for testing
purposes only.

Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: streebog - remove two unused variables

crypto/streebog_generic.c:162:17: warning:
 Pi defined but not used [-Wunused-const-variable=]
crypto/streebog_generic.c:151:17: warning:
 Tau defined but not used [-Wunused-const-variable=]

They are never used, so can be removed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aes-generic - remove unused variable 'rco_tab'

crypto/aes_generic.c:64:18: warning:
 rco_tab defined but not used [-Wunused-const-variable=]

It is never used, so can be removed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Documentation: crypto: crypto_engine: Fix Sphinx warning

This fixes the following Sphinx warning:

Documentation/crypto/crypto_engine.rst:2:
  WARNING: Explicit markup ends without a blank line; unexpected unindent.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cavium/nitrox - Configure asymmetric queue manager Hardware unit

This patch configures and initializes CNN55XX device AQM hardware unit.

Signed-off-by: Phani Kiran Hemadri <phemadri@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cavium/nitrox - Allocate asymmetric crypto command queues

This patch adds support to allocate CNN55XX device AQMQ command queues
required for submitting asymmetric crypto requests.

Signed-off-by: Phani Kiran Hemadri <phemadri@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: cryptd - Use refcount_t for refcount

Reference counters are preferred to use refcount_t instead of
atomic_t.
This is because the implementation of refcount_t can prevent
overflows and detect possible use-after-free.
So convert atomic_t ref counters to refcount_t.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: core - Freeze khwrng thread during suspend

The hwrng_fill() function can run while devices are suspending and
resuming. If the hwrng is behind a bus such as i2c or SPI and that bus
is suspended, the hwrng may hang the bus while attempting to add some
randomness. It's been observed on ChromeOS devices with suspend-to-idle
(s2idle) and an i2c based hwrng that this kthread may run and ask the
hwrng device for randomness before the i2c bus has been resumed.

Let's make this kthread freezable so that we don't try to touch the
hwrng during suspend/resume. This ensures that we can't cause the hwrng
backing driver to get into a bad state because the device is guaranteed
to be resumed before the hwrng kthread is thawed.

Cc: Andrey Pronin <apronin@chromium.org>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam/qi - execute library only on DPAA 1.x

In the process of turning caam/qi into a library, the check of
MCFGR[QI] bit has been inadvertently dropped.
Fix the condition for DPAA 1.x QI detection, which should be:
MCFGR[QI] && !MCFGR[DPAA2]

A check in the library exit point is currently not needed,
since the list of registered algorithms is empty.

While here, silence the library initialization abort - since jr.c
calls it unconditionally.

Fixes: 1b46c90c8e00 ("crypto: caam - convert top level drivers to libraries")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - fix error handle in hisi_zip_create_req_q

Directly return error in the first loop in hisi_zip_create_req_q.

Fixes: 62c455ca853e ("crypto: hisilicon - add HiSilicon ZIP accelerator support")
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - add missing single_release

Fix to add missing single_release in qm_regs_fops.

Fixes: 263c9959c937 ("crypto: hisilicon - add queue management driver for HiSilicon QM module")
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - init curr_sgl_dma to fix compile warning

Just init curr_sgl_dma = 0 to avoid compile warning.

Fixes: dfed0098ab91 ("crypto: hisilicon - add hardware SGL support")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - add dependency for CRYPTO_DEV_HISI_ZIP

Add ARM64/PCI/PCI_MSI dependency for CRYPTO_DEV_HISI_ZIP.

Fixes: 62c455ca853e ("crypto: hisilicon - add HiSilicon ZIP accelerator support")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - fix kbuild warnings

Fix to use proper type of argument for dma_addr_t and size_t.

Fixes: 263c9959c937 ("crypto: hisilicon - add queue management driver for HiSilicon QM module")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

padata: initialize pd->cpu with effective cpumask

Exercising CPU hotplug on a 5.2 kernel with recent padata fixes from
cryptodev-2.6.git in an 8-CPU kvm guest...

    # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3
    # echo 0 > /sys/devices/system/cpu/cpu1/online
    # echo c > /sys/kernel/pcrypt/pencrypt/parallel_cpumask
    # modprobe tcrypt mode=215

...caused the following crash:

    BUG: kernel NULL pointer dereference, address: 0000000000000000
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 0 P4D 0
    Oops: 0000 [#1] SMP PTI
    CPU: 2 PID: 134 Comm: kworker/2:2 Not tainted 5.2.0-padata-base+ #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-<snip>
    Workqueue: pencrypt padata_parallel_worker
    RIP: 0010:padata_reorder+0xcb/0x180
    ...
    Call Trace:
     padata_do_serial+0x57/0x60
     pcrypt_aead_enc+0x3a/0x50 [pcrypt]
     padata_parallel_worker+0x9b/0xe0
     process_one_work+0x1b5/0x3f0
     worker_thread+0x4a/0x3c0
     ...

In padata_alloc_pd, pd->cpu is set using the user-supplied cpumask
instead of the effective cpumask, and in this case cpumask_first picked
an offline CPU.

The offline CPU's reorder->list.next is NULL in padata_reorder because
the list wasn't initialized in padata_init_pqueues, which only operates
on CPUs in the effective mask.

Fix by using the effective mask in padata_alloc_pd.

Fixes: 6fc4dbcf0276 ("padata: Replace delayed timer with immediate workqueue in padata_reorder")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - Remove unnecessary linux/pci.h include

Remove unused includes of linux/pci.h.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - Include DMA declarations explicitly

ccp-dev.h uses dma_direction, which is defined in linux/dma-direction.h.
Include that explicitly instead of relying on it being included via
linux/pci.h, since ccp-dev.h requires nothing else from linux/pci.h.

Similarly, ccp-dmaengine.c uses dma_get_mask(), which is defined in
linux/dma-mapping.h, so include that explicitly since it requires nothing
else from linux/pci.h.

A future patch will remove the includes of linux/pci.h where it is not
needed.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qcom-rng - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qce - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: stm32 - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: rockchip - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: sunxi-ss - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: picoxcell - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: mediatek - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside-secure - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: img-hash - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: exynos - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: artpec6 - use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: gcm - restrict assoclen for rfc4543

Based on seqiv, IPsec ESP and rfc4543/rfc4106 the assoclen can be 16 or
20 bytes.

From esp4/esp6, assoclen is sizeof IP Header. This includes spi, seq_no
and extended seq_no, that is 8 or 12 bytes.
In seqiv, to asscolen is added the IV size (8 bytes).
Therefore, the assoclen, for rfc4543, should be restricted to 16 or 20
bytes, as for rfc4106.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MAINTAINERS: add maintainer for HiSilicon QM and ZIP controller driver

Add Zhou Wang as a maintainer for HiSilicon QM and ZIP controller driver.

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - add debugfs for ZIP and QM

HiSilicon ZIP engine driver uses debugfs to provide debug information,
the usage can be found in /Documentation/ABI/testing/debugfs-hisi-zip.

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Documentation: Add debugfs doc for hisi_zip

Add debugfs descriptions for HiSilicon ZIP and QM driver.

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - add SRIOV support for ZIP

HiSilicon ZIP engine supports PCI SRIOV. This patch enable this feature.
User can enable VFs and pass through them to VM, same ZIP driver can work
in VM to provide ZLIB and GZIP algorithm by crypto acomp interface.

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - add HiSilicon ZIP accelerator support

The HiSilicon ZIP accelerator implements the zlib and gzip algorithm. It
uses Hisilicon QM as the interface to the CPU.

This patch provides PCIe driver to the accelerator and registers it to
crypto acomp interface. It also uses sgl as data input/output interface.

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Kenneth Lee <liguozhu@hisilicon.com>
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - add hardware SGL support

HiSilicon accelerators in Hip08 use same hardware scatterlist for data format.
We support it in this module.

Specific accelerator drivers can use hisi_acc_create_sgl_pool to allocate
hardware SGLs ahead. Then use hisi_acc_sg_buf_map_to_hw_sgl to get one
hardware SGL and pass related information to hardware SGL.

The DMA address of mapped hardware SGL can be passed to SGL src/dst field
in QM SQE.

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: hisilicon - add queue management driver for HiSilicon QM module

QM is a general IP used by HiSilicon accelerators. It provides a general
PCIe interface for the CPU and the accelerator to share a group of queues.

A QM integrated in an accelerator provides queue management service.
Queues can be assigned to PF and VFs, and queues can be controlled by
unified mailboxes and doorbells. Specific task request are descripted by
specific description buffer, which will be controlled and pass to related
accelerator IP by QM.

This patch adds a QM driver used by the accelerator driver to access
the QM hardware.

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Kenneth Lee <liguozhu@hisilicon.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: engine - Reduce default RT priority

The crypto engine initializes its kworker thread to FIFO-99 (when
requesting RT priority), reduce this to FIFO-50.

FIFO-99 is the very highest priority available to SCHED_FIFO and
it not a suitable default; it would indicate the crypto work is the
most important work on the machine.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - change return value in case CAAM has no MDHA

To be consistent with other CAAM modules, caamhash should return 0
instead of -ENODEV in case CAAM has no MDHA.

Based on commit 1b46c90c8e00 ("crypto: caam - convert top level drivers to libraries")
the value returned by entry point is never checked and
the exit point is always executed.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - unregister algorithm only if the registration succeeded

To know if a registration succeeded added a new struct,
caam_akcipher_alg, that keeps, also, the registration status.
This status is updated in caam_pkc_init and verified in
caam_pkc_exit to unregister an algorithm.

Fixes: 1b46c90c8e00 ("crypto: caam - convert top level drivers to libraries")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - execute module exit point only if necessary

Commit 1b46c90c8e00 ("crypto: caam - convert top level drivers to libraries")
changed entry and exit points behavior for caamalg,
caamalg_qi, caamalg_qi2, caamhash, caampkc, caamrng.

For example, previously caam_pkc_init() and caam_pkc_exit() were
module entry/exit points. This means that if an error would happen
in caam_pkc_init(), then caam_pkc_exit() wouldn't have been called.
After the mentioned commit, caam_pkc_init() and caam_pkc_exit()
are manually called - from jr.c. caam_pkc_exit() is called
unconditionally, even if caam_pkc_init() failed.

Added a global variable to keep the status of the algorithm
registration and free of resources.
The exit point of caampkc/caamrng module is executed only if the
registration was successful. Therefore we avoid double free of
resources in case the algorithm registration failed.

Fixes: 1b46c90c8e00 ("crypto: caam - convert top level drivers to libraries")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - free resources in case caam_rng registration failed

Check the return value of the hardware registration for caam_rng and free
resources in case of failure.

Fixes: e24f7c9e87d4 ("crypto: caam - hwrng support")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix MDHA key derivation for certain user key lengths

Fuzz testing uncovered an issue when |user key| > |derived key|.
Derived key generation has to be fixed in two cases:

1. Era >= 6 (DKP is available)
DKP cannot be used with immediate input key if |user key| > |derived key|,
since the resulting descriptor (after DKP execution) would be invalid -
having a few bytes from user key left in descriptor buffer
as incorrect opcodes.

Fix DKP usage both in standalone hmac and in authenc algorithms.
For authenc the logic is simplified, by always storing both virtual
and dma key addresses.

2. Era < 6
The same case (|user key| > |derived key|) fails when DKP
is not available.
Make sure gen_split_key() dma maps max(|user key|, |derived key|),
since this is an in-place (bidirectional) operation.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - keep both virtual and dma key addresses

Update alginfo struct to keep both virtual and dma key addresses,
so that descriptors have them at hand.
One example where this is needed is in the xcbc(aes) shared descriptors,
which are updated in current patch.
Another example is the upcoming fix for DKP.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - update rfc4106 sh desc to support zero length input

Update share descriptor for rfc4106 to skip instructions in case
cryptlen is zero. If no instructions are jumped the DECO hangs and a
timeout error is thrown.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - check zero-length input

Check zero-length input, for skcipher algorithm, to solve the extra
tests. This is a valid operation, therefore the API will return no error.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - check assoclen

Check assoclen to solve the extra tests that expect -EINVAL to be
returned when the associated data size is not valid.

Validated assoclen for RFC4106 and RFC4543 which expects an assoclen
of 16 or 20.
Based on seqiv, IPsec ESP and RFC4543/RFC4106 the assoclen is sizeof IP
Header (spi, seq_no, extended seq_no) and IV len. This can be 16 or 20
bytes.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - check authsize

Check authsize to solve the extra tests that expect -EINVAL to be
returned when the authentication tag size is not valid.

Validated authsize for GCM, RFC4106 and RFC4543.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - check key length

Check key length to solve the extra tests that expect -EINVAL to be
returned when the key size is not valid.

Validated AES keylen for skcipher, ahash and aead.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - update IV only when crypto operation succeeds

skcipher encryption might fail and in some cases, like (invalid) input
length smaller then block size, updating the IV would lead to a useless
IV copy in case hardware issued an error.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix return code in completion callbacks

Modify drive to provide a valid errno (and not the HW error ID)
to the user, via completion callbacks.

A "valid errno" is currently not explicitly mentioned in the docs,
however the error code is expected to match the one returned by the
generic SW implementation.

Note: in most error cases caam/qi and caam/qi2 returned -EIO; align all
caam drivers to return -EINVAL.

While here, ratelimit prints triggered by fuzz testing, such that
console is not flooded.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam/qi - fix error handling in ERN handler

ERN handler calls the caam/qi frontend "done" callback with a status
of -EIO. This is incorrect, since the callback expects a status value
meaningful for the crypto engine - hence the cryptic messages
like the one below:
platform caam_qi: 15: unknown error source

Fix this by providing the callback with:
-the status returned by the crypto engine (fd[status]) in case
it contains an error, OR
-a QI "No error" code otherwise; this will trigger the message:
platform caam_qi: 50000000: Queue Manager Interface: No error
which is fine, since QMan driver provides details about the cause of
failure

Cc: <stable@vger.kernel.org> # v5.1+
Fixes: 67c2315def06 ("crypto: caam - add Queue Interface (QI) backend support")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: aes - helper function to validate key length for AES algorithms

Add inline helper function to check key length for AES algorithms.
The key can be 128, 192 or 256 bits size.
This function is used in the generic aes implementation.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: gcm - helper functions for assoclen/authsize check

Added inline helper functions to check authsize and assoclen for
gcm, rfc4106 and rfc4543.
These are used in the generic implementation of gcm, rfc4106 and
rfc4543.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside-secure - Remove redundant DES ECB & CBC keysize check

This patch removes a DES key size check that is redundant as it is already
performed by the crypto API itself due to min_keysize = max_keysize.

Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - Clean up and exit correctly on allocation failure

Return and fail driver initialization if a DMA pool or coherent memory
can't be allocated. Be sure to clean up allocated memory.

Fixes: 4b394a232df7 ("crypto: ccp - Let a v5 CCP provide the same function as v3")

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: drivers - Remove dev_err() usage after platform_get_irq()

We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <linux-crypto@vger.kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: inside-secure - Use defines instead of some constants (cosmetic)

This patch replaces some hard constants regarding key, IV and nonce sizes
with appropriate defines from the crypto header files.

Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam - fix concurrency issue in givencrypt descriptor

IV transfer from ofifo to class2 (set up at [29][30]) is not guaranteed
to be scheduled before the data transfer from ofifo to external memory
(set up at [38]:

[29] 10FA0004           ld: ind-nfifo (len=4) imm
[30] 81F00010               <nfifo_entry: ofifo->class2 type=msg len=16>
[31] 14820004           ld: ccb2-datasz len=4 offs=0 imm
[32] 00000010               data:0x00000010
[33] 8210010D    operation: cls1-op aes cbc init-final enc
[34] A8080B04         math: (seqin + math0)->vseqout len=4
[35] 28000010    seqfifold: skip len=16
[36] A8080A04         math: (seqin + math0)->vseqin len=4
[37] 2F1E0000    seqfifold: both msg1->2-last2-last1 len=vseqinsz
[38] 69300000   seqfifostr: msg len=vseqoutsz
[39] 5C20000C      seqstr: ccb2 ctx len=12 offs=0

If ofifo -> external memory transfer happens first, DECO will hang
(issuing a Watchdog Timeout error, if WDOG is enabled) waiting for
data availability in ofifo for the ofifo -> c2 ififo transfer.

Make sure IV transfer happens first by waiting for all CAAM internal
transfers to end before starting payload transfer.

New descriptor with jump command inserted at [37]:

[..]
[36] A8080A04         math: (seqin + math0)->vseqin len=4
[37] A1000401         jump: jsl1 all-match[!nfifopend] offset=[01] local->[38]
[38] 2F1E0000    seqfifold: both msg1->2-last2-last1 len=vseqinsz
[39] 69300000   seqfifostr: msg len=vseqoutsz
[40] 5C20000C      seqstr: ccb2 ctx len=12 offs=0

[Note: the issue is present in the descriptor from the very beginning
(cf. Fixes tag). However I've marked it v4.19+ since it's the oldest
maintained kernel that the patch applies clean against.]

Cc: <stable@vger.kernel.org> # v4.19+
Fixes: 1acebad3d8db8 ("crypto: caam - faster aead implementation")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ux500/crypt - Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’:
drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
   ctx->key_4_r = readl_relaxed(&src_reg->key_4_r);
drivers/crypto/ux500/cryp/cryp.c:318:2: note: here
  case CRYP_KEY_SIZE_192:
  ^~~~
drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
   ctx->key_3_r = readl_relaxed(&src_reg->key_3_r);
drivers/crypto/ux500/cryp/cryp.c:322:2: note: here
  case CRYP_KEY_SIZE_128:
  ^~~~
drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
   ctx->key_2_r = readl_relaxed(&src_reg->key_2_r);
drivers/crypto/ux500/cryp/cryp.c:326:2: note: here
  default:
  ^~~~~~~
In file included from ./include/linux/io.h:13:0,
                 from drivers/crypto/ux500/cryp/cryp_p.h:14,
                 from drivers/crypto/ux500/cryp/cryp.c:15:
drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 #define __raw_writel __raw_writel
                      ^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
 #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
                             ^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’
   writel_relaxed(ctx->key_4_r, &reg->key_4_r);
   ^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:365:2: note: here
  case CRYP_KEY_SIZE_192:
  ^~~~
In file included from ./include/linux/io.h:13:0,
                 from drivers/crypto/ux500/cryp/cryp_p.h:14,
                 from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 #define __raw_writel __raw_writel
                      ^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
 #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
                             ^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’
   writel_relaxed(ctx->key_3_r, &reg->key_3_r);
   ^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:369:2: note: here
  case CRYP_KEY_SIZE_128:
  ^~~~
In file included from ./include/linux/io.h:13:0,
                 from drivers/crypto/ux500/cryp/cryp_p.h:14,
                 from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 #define __raw_writel __raw_writel
                      ^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
 #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
                             ^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’
   writel_relaxed(ctx->key_2_r, &reg->key_2_r);
   ^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:373:2: note: here
  default:
  ^~~~~~~

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccp - Log an error message when ccp-crypto fails to load

If there are no CCP devices on the system, ccp-crypto will not load.
Write a message to the system log clarifying the reason for the failure
of the modprobe operation

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccree - use std api sg_zero_buffer

Replace internal cc_zero_sgl() with kernel API of the same function
sg_zero_buffer().

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccree - use the full crypt length value

In case of AEAD decryption verifcation error we were using the
wrong value to zero out the plaintext buffer leaving the end of
the buffer with the false plaintext.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: ff27e85a85bb ("crypto: ccree - add AEAD support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: n2-drv - fix typo

Fixes: 3e75241be808 ("hwrng: drivers - Use device-managed registration API")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

asm-generic: Remove redundant arch-specific rules for simd.h

Now that simd.h is in include/asm-generic/Kbuild we don't need
the arch-specific Kbuild rules for them.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 82cb54856874 ("asm-generic: make simd.h a mandatory...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

crypto: caam - defer probing until QMan is available

When QI (Queue Interface) support is enabled on DPAA 1.x platforms,
defer probing if dependencies (QMan drivers) are not available yet.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: timeriomem - add include guard to timeriomem-rng.h

Add a header include guard just in case.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: api - Remove redundant #ifdef in crypto_yield()

While looking at CONFIG_PREEMPT dependencies treewide the #ifdef in
crypto_yield() matched.

CONFIG_PREEMPT and CONFIG_PREEMPT_VOLUNTARY are mutually exclusive so the
extra !CONFIG_PREEMPT conditional is redundant.

cond_resched() has only an effect when CONFIG_PREEMPT_VOLUNTARY is set,
otherwise it's a stub which the compiler optimizes out.

Remove the whole conditional.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-crypto@vger.kernel.org
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

hwrng: drivers - Use device-managed registration API

Use devm_hwrng_register to simplify the implementation.
Manual unregistration and some remove functions can be
removed now.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: jitterentropy - build without sanitizer

Recent clang-9 snapshots double the kernel stack usage when building
this file with -O0 -fsanitize=kernel-hwaddress, compared to clang-8
and older snapshots, this changed between commits svn364966 and
svn366056:

crypto/jitterentropy.c:516:5: error: stack frame size of 2640 bytes in function 'jent_entropy_init' [-Werror,-Wframe-larger-than=]
int jent_entropy_init(void)
    ^
crypto/jitterentropy.c:185:14: error: stack frame size of 2224 bytes in function 'jent_lfsr_time' [-Werror,-Wframe-larger-than=]
static __u64 jent_lfsr_time(struct rand_data *ec, __u64 time, __u64 loop_cnt)
             ^

I prepared a reduced test case in case any clang developers want to
take a closer look, but from looking at the earlier output it seems
that even with clang-8, something was very wrong here.

Turn off any KASAN and UBSAN sanitizing for this file, as that likely
clashes with -O0 anyway.  Turning off just KASAN avoids the warning
already, but I suspect both of these have undesired side-effects
for jitterentropy.

Link: https://godbolt.org/z/fDcwZ5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: nx - Add of_node_put() before return in 842

Each iteration of for_each_compatible_node puts the previous node, but
in the case of a return from the middle of the loop, there is no put,
thus causing a memory leak. Add an of_node_put before the return.
Issue found with Coccinelle.

Acked-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: user - fix potential warnings in cryptouser.h

Function definitions in headers are usually marked as 'static inline'.

Since 'inline' is missing for crypto_reportstat(), if it were not
referenced from a .c file that includes this header, it would produce
a warning.

Also, 'struct crypto_user_alg' is not declared in this header.

I included <linux/crytouser.h> instead of adding the forward declaration
as suggested [1].

Detected by compile-testing this header as a standalone unit:

./include/crypto/internal/cryptouser.h:6:44: warning: ‘struct crypto_user_alg’ declared inside parameter list will not be visible outside of this definition or declaration
 struct crypto_alg *crypto_alg_match(struct crypto_user_alg *p, int exact);
                                            ^~~~~~~~~~~~~~~
./include/crypto/internal/cryptouser.h:11:12: warning: ‘crypto_reportstat’ defined but not used [-Wunused-function]
 static int crypto_reportstat(struct sk_buff *in_skb, struct nlmsghdr *in_nlh, struct nlattr **attrs)
            ^~~~~~~~~~~~~~~~~

[1] https://lkml.org/lkml/2019/6/13/1121

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: add header include guards

Add header include guards in case they are included multiple times.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: caam/qi2 - Add printing dpseci fq stats using debugfs

Add support of printing the dpseci frame queue statistics using debugfs.

Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: qat - Silence smp_processor_id() warning

It seems that smp_processor_id() is only used for a best-effort
load-balancing, refer to qat_crypto_get_instance_node(). It's not feasible
to disable preemption for the duration of the crypto requests. Therefore,
just silence the warning. This commit is similar to e7a9b05ca4
("crypto: cavium - Fix smp_processor_id() warnings").

Silences the following splat:
BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/2904
caller is qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat]
CPU: 1 PID: 2904 Comm: cryptomgr_test Tainted: P           O    4.14.69 #1
...
Call Trace:
 dump_stack+0x5f/0x86
 check_preemption_disabled+0xd3/0xe0
 qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat]
 skcipher_setkey_ablkcipher+0x2b/0x40
 __test_skcipher+0x1f3/0xb20
 ? cpumask_next_and+0x26/0x40
 ? find_busiest_group+0x10e/0x9d0
 ? preempt_count_add+0x49/0xa0
 ? try_module_get+0x61/0xf0
 ? crypto_mod_get+0x15/0x30
 ? __kmalloc+0x1df/0x1f0
 ? __crypto_alloc_tfm+0x116/0x180
 ? crypto_skcipher_init_tfm+0xa6/0x180
 ? crypto_create_tfm+0x4b/0xf0
 test_skcipher+0x21/0xa0
 alg_test_skcipher+0x3f/0xa0
 alg_test.part.6+0x126/0x2a0
 ? finish_task_switch+0x21b/0x260
 ? __schedule+0x1e9/0x800
 ? __wake_up_common+0x8d/0x140
 cryptomgr_test+0x40/0x50
 kthread+0xff/0x130
 ? cryptomgr_notify+0x540/0x540
 ? kthread_create_on_node+0x70/0x70
 ret_from_fork+0x24/0x50

Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: atmel-sha204a - Use device-managed registration API

Use devm_hwrng_register to get rid of manual
unregistration.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Revert "crypto: aegis128 - add support for SIMD acceleration"

This reverts commit ecc8bc81f2fb3976737ef312f824ba6053aa3590
("crypto: aegis128 - provide a SIMD implementation based on NEON
intrinsics") and commit 7cdc0ddbf74a19cecb2f0e9efa2cae9d3c665189
("crypto: aegis128 - add support for SIMD acceleration").

They cause compile errors on platforms other than ARM because
the mechanism to selectively compile the SIMD code is broken.

Repoted-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

asm-generic: make simd.h a mandatory include/asm header

The generic aegis128 software crypto driver recently gained support
for using SIMD intrinsics to increase performance, for which it
uncondionally #include's the <asm/simd.h> header. Unfortunately,
this header does not exist on many architectures, resulting in
build failures.

Since asm-generic already has a version of simd.h, let's make it
a mandatory header so that it gets instantiated on all architectures
that don't provide their own version.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: s390/aes - fix name clash after AES library refactor

The newly introduced AES library exposes aes_encrypt/aes_decrypt
routines so rename existing occurrences of those identifiers in
the s390 driver.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ghash - add comment and improve help text

To help avoid confusion, add a comment to ghash-generic.c which explains
the convention that the kernel's implementation of GHASH uses.

Also update the Kconfig help text and module descriptions to call GHASH
a "hash function" rather than a "message digest", since the latter
normally means a real cryptographic hash function, which GHASH is not.

Cc: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

padata: purge get_cpu and reorder_via_wq from padata_do_serial

With the removal of the padata timer, padata_do_serial no longer
needs special CPU handling, so remove it.

Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: bcm - check assoclen for rfc4543/rfc4106

Validated assoclen for RFC4543 which expects an assoclen
of 16 or 20, the same as RFC4106.
Based on seqiv, IPsec ESP and RFC4543/RFC4106 the assoclen is sizeof
IP Header (spi, seq_no, extended seq_no) and IV len. This can be 16 or
20 bytes.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto: ccree - check assoclen for rfc4543

Check assoclen to solve the extra tests that expect -EINVAL to be
returned when the associated data size is not valid.

Validated assoclen for RFC4543 which expects an assoclen
of 16 or 20, the same as RFC4106.
Based on seqiv, IPsec ESP and RFC4543/RFC4106 the assoclen is sizeof
IP Header (spi, seq_no, extended seq_no) and IV len. This can be 16 or
20 bytes.

Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>