sysrq: Reset the watchdog timers while displaying high-resolution timers

[ Upstream commit 0107042768658fea9f5f5a9c00b1c90f5dab6a06 ]

On systems with a large number of CPUs, running sysrq-<q> can cause
watchdog timeouts.  There are two slow sections of code in the sysrq-<q>
path in timer_list.c.

1. print_active_timers() - This function is called by print_cpu() and
   contains a slow goto loop.  On a machine with hundreds of CPUs, this
   loop took approximately 100ms for the first CPU in a NUMA node.
   (Subsequent CPUs in the same node ran much quicker.)  The total time
   to print all of the CPUs is ultimately long enough to trigger the
   soft lockup watchdog.

2. print_tickdevice() - This function outputs a large amount of textual
   information.  This function also took approximately 100ms per CPU.

Since sysrq-<q> is not a performance critical path, there should be no
harm in touching the nmi watchdog in both slow sections above.  Touching
it in just one location was insufficient on systems with hundreds of
CPUs as occasional timeouts were still observed during testing.

This issue was observed on an Oracle T7 machine with 128 CPUs, but I
anticipate it may affect other systems with similarly large numbers of
CPUs.

Signed-off-by: Tom Hromatka <tom.hromatka@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timers, sched_clock: Update timeout for clock wrap

[ Upstream commit 1b8955bc5ac575009835e371ae55e7f3af2197a9 ]

The scheduler clock framework may not use the correct timeout for the clock
wrap. This happens when a new clock driver calls sched_clock_register()
after the kernel called sched_clock_postinit(). In this case the clock wrap
timeout is too long thus sched_clock_poll() is called too late and the clock
already wrapped.

On my ARM system the scheduler was no longer scheduling any other task than
the idle task because the sched_clock() wrapped.

Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: i2c/soc_camera: fix ov6650 sensor getting wrong clock

[ Upstream commit 54449af0e0b2ea43a8166611c95b730c850c3184 ]

After changes to v4l2_clk API introduced in v4.1 by commits a37462b919
'[media] V4L: remove clock name from v4l2_clk API' and 4f528afcfb
'[media] V4L: add CCF support to the v4l2_clk API', ov6650 sensor
stopped responding because v4l2_clk_get(), still called with
depreciated V4L2 clock name "mclk", started to return respective CCF
clock instead of the V4l2 one registered by soc_camera. Fix it by
calling v4l2_clk_get() with NULL clock name.

Created and tested on Amstrad Delta against Linux-4.7-rc3 with
omap1_camera fixes.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ipr: Fix missed EH wakeup

[ Upstream commit 66a0d59cdd12546ddf01d229de28b07ccf6d637f ]

Following a command abort or device reset, ipr's EH handlers wait for
the commands getting aborted to get sent back from the adapter prior to
returning from the EH handler. This fixes up some cases where the
completion handler was not getting called, which would have resulted in
the EH thread waiting until it timed out, greatly extending EH time.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: fnic: Fix for "Number of Active IOs" in fnicstats becoming negative

[ Upstream commit 7ef539c88d7d394410d547c9f082d477093a2a22 ]

Fixing the IO stats update (Active IOs and IO completion) to prevent
"Number of Active IOs" from becoming negative in the fnistats output.

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot/32: Defer resyncing initial_page_table until per-cpu is set up

[ Upstream commit 23b2a4ddebdd17fad265b4bb77256c2e4ec37dee ]

The x86 smpboot trampoline expects initial_page_table to have the
GDT mapped.  If the GDT ends up in a virtually mapped per-cpu page,
then it won't be in the page tables at all until perc-pu areas are
set up.  The result will be a triple fault the first time that the
CPU attempts to access the GDT after LGDT loads the perc-pu GDT.

This appears to be an old bug, but somehow the GDT fixmap rework
is triggering it.  This seems to have something to do with the
memory layout.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/a553264a5972c6a86f9b5caac237470a0c74a720.1490218061.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

solo6x10: release vb2 buffers in solo_stop_streaming()

[ Upstream commit 6e4c8480bd2eb95309ad3c875e11d2cad98f9188 ]

Fixes warning that appears in dmesg after closing V4L2 userspace
application that plays video from the display device
(first device from V4L2 device nodes provided by solo, usually /dev/video0
when no other V4L2 devices are present). Encoder device nodes are not
affected. Can be reproduced by starting and closing

ffplay -f video4linux2  /dev/video0

[ 8130.281251] ------------[ cut here ]------------
[ 8130.281256] WARNING: CPU: 1 PID: 20414 at drivers/media/v4l2-core/videobuf2-core.c:1651 __vb2_queue_cancel+0x14b/0x230
[ 8130.281257] Modules linked in: ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat solo6x10 x86_pkg_temp_thermal vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O)
[ 8130.281264] CPU: 1 PID: 20414 Comm: ffplay Tainted: G           O    4.10.0-gentoo #1
[ 8130.281264] Hardware name: ASUS All Series/B85M-E, BIOS 2301 03/30/2015
[ 8130.281265] Call Trace:
[ 8130.281267]  dump_stack+0x4f/0x72
[ 8130.281270]  __warn+0xc7/0xf0
[ 8130.281271]  warn_slowpath_null+0x18/0x20
[ 8130.281272]  __vb2_queue_cancel+0x14b/0x230
[ 8130.281273]  vb2_core_streamoff+0x23/0x90
[ 8130.281275]  vb2_streamoff+0x24/0x50
[ 8130.281276]  vb2_ioctl_streamoff+0x3d/0x50
[ 8130.281278]  v4l_streamoff+0x15/0x20
[ 8130.281279]  __video_do_ioctl+0x25e/0x2f0
[ 8130.281280]  video_usercopy+0x279/0x520
[ 8130.281282]  ? v4l_enum_fmt+0x1330/0x1330
[ 8130.281285]  ? unmap_region+0xdf/0x110
[ 8130.281285]  video_ioctl2+0x10/0x20
[ 8130.281286]  v4l2_ioctl+0xce/0xe0
[ 8130.281289]  do_vfs_ioctl+0x8b/0x5b0
[ 8130.281290]  ? __fget+0x72/0xa0
[ 8130.281291]  SyS_ioctl+0x74/0x80
[ 8130.281294]  entry_SYSCALL_64_fastpath+0x13/0x94
[ 8130.281295] RIP: 0033:0x7ff86fee6b27
[ 8130.281296] RSP: 002b:00007ffe467f6a08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 8130.281297] RAX: ffffffffffffffda RBX: 00000000d1a4d788 RCX: 00007ff86fee6b27
[ 8130.281297] RDX: 00007ffe467f6a14 RSI: 0000000040045613 RDI: 0000000000000006
[ 8130.281298] RBP: 000000000373f8d0 R08: 00000000ffffffff R09: 00007ff860001140
[ 8130.281298] R10: 0000000000000243 R11: 0000000000000246 R12: 0000000000000000
[ 8130.281299] R13: 00000000000000a0 R14: 00007ffe467f6530 R15: 0000000001f32228
[ 8130.281300] ---[ end trace 00695dc96be646e7 ]---

Signed-off-by: Anton Sviridenko <anton@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: fix of_device_get_modalias returned length when truncating buffers

[ Upstream commit bcf54d5385abaea9c8026aae6f4eeb348671a52d ]

If the length of the modalias is greater than the buffer size, then the
modalias is truncated. However the untruncated length is returned which
will cause an error. Fix this to return the truncated length. If an error
in the case was desired, then then we should just return -ENOMEM.

The reality is no device will ever have 4KB of compatible strings to hit
this case.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: handle race condition for claims between gateways

[ Upstream commit a3a5129e122709306cfa6409781716c2933df99b ]

Consider the following situation which has been found in a test setup:
Gateway B has claimed client C and gateway A has the same backbone
network as B. C sends a broad- or multicast to B and directly after
this packet decides to send another packet to A due to a better TQ
value. B will forward the broad-/multicast into the backbone as it is
the responsible gw and after that A will claim C as it has been
chosen by C as the best gateway. If it now happens that A claims C
before it has received the broad-/multicast forwarded by B (due to
backbone topology or due to some delay in B when forwarding the
packet) we get a critical situation: in the current code A will
immediately unclaim C when receiving the multicast due to the
roaming client scenario although the position of C has not changed
in the mesh. If this happens the multi-/broadcast forwarded by B
will be sent back into the mesh by A and we have looping packets
until one of the gateways claims C again.
In order to prevent this, unclaiming of a client due to the roaming
client scenario is only done after a certain time is expired after
the last claim of the client. 100 ms are used here, which should be
slow enough for big backbones and slow gateways but fast enough not
to break the roaming client use case.

Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Andreas Pape <apape@phoenixcontact.com>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zd1211rw: fix NULL-deref at probe

[ Upstream commit ca260ece6a57dc7d751e0685f51fa2c55d851873 ]

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: a1030e92c150 ("[PATCH] zd1211rw: Convert installer CDROM device into WLAN device")
Cc: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/topology: fix typo in early topology code

[ Upstream commit 4fd4dd8bffb112d1e6549e0ff09e9fa3c8cc2b96 ]

Use MACHINE_FLAG_TOPOLOGY instead of MACHINE_HAS_TOPOLOGY when
clearing the bit that indicates if the machine provides topology
information (and if it should be used). Currently works anyway.

Fixes: 68cc795d1933 ("s390/topology: make "topology=off" parameter work")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Always publish VF link from leading hwfn

[ Upstream commit e50728effe1126eae39445ba144078b1305b7047 ]

The link information exists only on the leading hwfn,
but some of its derivatives [e.g., min/max rate] need to
be configured for each hwfn.
When re-basing the VF link view, use the leading hwfn
information as basis for all existing hwfns to allow
said configurations to stick.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: Adjust moxart IRQ controller and flags

[ Upstream commit c2a736b698008d296c5010ec39077eeb5796109f ]

The moxart interrupt line flags were not respected in previous
driver: instead of assigning them per-consumer, a fixes mask
was set in the controller.

With the migration to a standard Faraday driver we need to
set up and handle the consumer flags correctly. Also remove
the Moxart-specific flags when switching to using real consumer
flags.

Extend the register window to 0x100 bytes as we may have a few
more registers in there and it doesn't hurt.

Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/8021q: create device with all possible features in wanted_features

[ Upstream commit 88997e4208aea117627898e5f6f9801cf3cd42d2 ]

wanted_features is a set of features which have to be enabled if a
hardware allows that.

Currently when a vlan device is created, its wanted_features is set to
current features of its base device.

The problem is that the base device can get new features and they are
not propagated to vlan-s of this device.

If we look at bonding devices, they doesn't have this problem and this
patch suggests to fix this issue by the same way how it works for bonding
devices.

We meet this problem, when we try to create a vlan device over a bonding
device. When a system are booting, real devices require time to be
initialized, so bonding devices created without slaves, then vlan
devices are created and only then ethernet devices are added to the
bonding device. As a result we have vlan devices with disabled
scatter-gather.

* create a bonding device
  $ ip link add bond0 type bond
  $ ethtool -k bond0 | grep scatter
  scatter-gather: off
tx-scatter-gather: off [requested on]
tx-scatter-gather-fraglist: off [requested on]

* create a vlan device
  $ ip link add link bond0 name bond0.10 type vlan id 10
  $ ethtool -k bond0.10 | grep scatter
  scatter-gather: off
tx-scatter-gather: off
tx-scatter-gather-fraglist: off

* Add a slave device to bond0
  $ ip link set dev eth0 master bond0

And now we can see that the bond0 device has got the scatter-gather
feature, but the bond0.10 hasn't got it.
[root@laptop linux-task-diag]# ethtool -k bond0 | grep scatter
scatter-gather: on
tx-scatter-gather: on
tx-scatter-gather-fraglist: on
[root@laptop linux-task-diag]# ethtool -k bond0.10 | grep scatter
scatter-gather: off
tx-scatter-gather: off
tx-scatter-gather-fraglist: off

With this patch the vlan device will get all new features from the
bonding device.

Here is a call trace how features which are set in this patch reach
dev->wanted_features.

register_netdevice
   vlan_dev_init
...
dev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG |
       NETIF_F_FRAGLIST | NETIF_F_GSO_SOFTWARE |
       NETIF_F_HIGHDMA | NETIF_F_SCTP_CRC |
       NETIF_F_ALL_FCOE;

dev->features |= dev->hw_features;
...
    dev->wanted_features = dev->features & dev->hw_features;
    __netdev_update_features(dev);
        vlan_dev_fix_features
   ...

Cc: Alexey Kuznetsov <kuznet@virtuozzo.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: clamp input to logical range if no null state

[ Upstream commit c3883fe06488a483658ba5d849b70e49bee15e7c ]

This patch fixes an issue in drivers/hid/hid-input.c where values
outside of the logical range are not clamped when "null state" bit of
the input control is not set.

This was discussed on the lists [1] and this change stems from the fact
due to the ambiguity of the HID specification it might be appropriate to
follow Microsoft's own interpretation of the specification. As noted in
Microsoft's documentation [2] in the section titled "Required HID usages
for digitizers" it is noted that values reported outside the logical
range "will be considered as invalid data and the value will be changed
to the nearest boundary value (logical min/max)."

This patch fixes an issue where the (1292:4745) Innomedia INNEX
GENESIS/ATARI reports out of range values for its X and Y axis of the
DPad which, due to the null state bit being unset, are forwarded to
userspace as is. Now these values will get clamped to the logical range
before being forwarded to userspace. This device was also used to test
this patch.

This patch expands on commit 3f3752705dbd ("HID: reject input outside
logical range only if null state is set").

[1]: http://lkml.kernel.org/r/20170307131036.GA853@gaia.local
[2]: https://msdn.microsoft.com/en-us/library/windows/hardware/dn672278(v=vs.85).asp

Signed-off-by: Tomasz Kramkowski <tk@the-tk.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe: Return errno when not hitting any event

[ Upstream commit 70946723eeb859466f026274b29c6196e39149c4 ]

On old perf, when using 'perf probe -d' to delete an inexistent event,
it returns errno, eg,

  -bash-4.3# perf probe -d xxx  || echo $?
  Info: Event "*:xxx" does not exist.
    Error: Failed to delete events.
  255

But now perf_del_probe_events() will always set ret = 0, different from
previous del_perf_probe_events(). After this, it returns errno again,
eg,

  -bash-4.3# ./perf probe -d xxx  || echo $?
  "xxx" does not hit any event.
    Error: Failed to delete events.
  254

And it is more appropriate to return -ENOENT instead of -EPERM.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: dddc7ee32fa1 ("perf probe: Fix an error when deleting probes successfully")
Link: http://lkml.kernel.org/r/1489738592-61011-1-git-send-email-wangkefeng.wang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe: Fix concat_probe_trace_events

[ Upstream commit f0a30dca5f84fe8048271799b56677ac2279de66 ]

'*ntevs' contains number of elements present in 'tevs' array. If there
are no elements in array, 'tevs2' can be directly assigned to 'tevs'
without allocating more space. So the condition should be  '*ntevs == 0'
not  'ntevs == 0'.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 42bba263eb58 ("perf probe: Allow wildcard for cached events")
Link: http://lkml.kernel.org/r/20170308065908.4128-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

omapfb: dss: Handle return errors in dss_init_ports()

[ Upstream commit 0348aaa34412e24ebe622a2b1b013e68d6ae5412 ]

dss_init_ports() is not handling return errors from dpi_init_port() and
sdi_init_port(). It is also always returning 0 currently which results in
part of error handling code in dss_bind() being unused.

Fix dss_init_ports() to handle return errors from dpi_init_port() and
sdi_init_port().

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: tomi.valkeinen@ti.com
[b.zolnierkie: fail early on errors, minor fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Init some CPU features early

[ Upstream commit 5204bf17031b69fa5faa4dc80a9dc1e2446d74f9 ]

When the MCA banks in __mcheck_cpu_init_generic() are polled for leftover
errors logged during boot or from the previous boot, its required to have
CPU features detected sufficiently so that the reading out and handling of
those early errors is done correctly.

If those features are not available, the decoding may miss some information
and get incomplete errors logged. For example, on SMCA systems the MCA_IPID
and MCA_SYND registers are not logged and MCA_ADDR is not masked
appropriately.

To cure that, do a subset of the basic feature detection early while the
rest happens in its usual place in __mcheck_cpu_init_vendor().

Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1489599055-20756-1-git-send-email-Yazen.Ghannam@amd.com
[ Massage commit message and simplify. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netem: apply correct delay when rate throttling

[ Upstream commit 5080f39e8c72e01cf37e8359023e7018e2a4901e ]

I recently reported on the netem list that iperf network benchmarks
show unexpected results when a bandwidth throttling rate has been
configured for netem. Specifically:

1) The measured link bandwidth *increases* when a higher delay is added
2) The measured link bandwidth appears higher than the specified limit
3) The measured link bandwidth for the same very slow settings varies significantly across
  machines

The issue can be reproduced by using tc to configure netem with a
512kbit rate and various (none, 1us, 50ms, 100ms, 200ms) delays on a
veth pair between network namespaces, and then using iperf (or any
other network benchmarking tool) to test throughput. Complete detailed
instructions are in the original email chain here:
https://lists.linuxfoundation.org/pipermail/netem/2017-February/001672.html

There appear to be two underlying bugs causing these effects:

- The first issue causes long delays when the rate is slow and no
  delay is configured (e.g., "rate 512kbit"). This is because SKBs are
  not orphaned when no delay is configured, so orphaning does not
  occur until *after* the rate-induced delay has been applied. For
  this reason, adding a tiny delay (e.g., "rate 512kbit delay 1us")
  dramatically increases the measured bandwidth.

- The second issue is that rate-induced delays are not correctly
  applied, allowing SKB delays to occur in parallel. The indended
  approach is to compute the delay for an SKB and to add this delay to
  the end of the current queue. However, the code does not detect
  existing SKBs in the queue due to improperly testing sch->q.qlen,
  which is nonzero even when packets exist only in the
  rbtree. Consequently, new SKBs do not wait for the current queue to
  empty. When packet delays vary significantly (e.g., if packet sizes
  are different), then this also causes unintended reordering.

I modified the code to expect a delay (and orphan the SKB) when a rate
is configured. I also added some defensive tests that correctly find
the latest scheduled delivery time, even if it is (unexpectedly) for a
packet in sch->q. I have tested these changes on the latest kernel
(4.11.0-rc1+) and the iperf / ping test results are as expected.

Signed-off-by: Nik Unger <njunger@uwaterloo.ca>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: bgmac: Allow MAC address to be specified in DTB

[ Upstream commit 2f771399a3a2c371c140ff33544a583c6fbc5fd9 ]

Allows the BCMA version of the bgmac driver to obtain MAC address
from the device tree.  If no MAC address is specified there, then
the previous behavior (obtaining MAC address from SPROM) is
used.

Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: bcm2835: Enable missing CMA settings for VC4 driver

[ Upstream commit bdd3c25423cb42171446940bca0946e0443e1a84 ]

Currently bcm2835_defconfig has CMA disabled which makes the
HDMI output on a Raspberry Pi 1 stop working during boot:

    fb: switching to vc4drmfb from simple
    Console: switching to colour dummy device 80x30
    [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
    [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [drm] Driver supports precise vblank timestamp query.
    vc4-drm soc:gpu: failed to allocate buffer with size 9216000
    vc4-drm soc:gpu: Failed to set initial hw configuration.

So enable CMA and DMA_CMA in bcm2835_defconfig.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 4400d9ac05ee ("ARM: bcm2835: Enable the VC4 graphics driver in the defconfig")
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: misc: lvs: fix race condition in disconnect handling

[ Upstream commit c4ba329cabca7c839ab48fb58b5bcc2582951a48 ]

There is a small window during which the an URB may
remain active after disconnect has returned. If in that case
already freed memory may be accessed and executed.

The fix is to poison the URB befotre the work is flushed.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: fix fetching channel during potential radar detection

[ Upstream commit a28f6f27a88f047f03f04b9246ca260ebc91455e ]

Fetch target operating channel during potential radar detection when
the interface is just brought up, but no channel is assigned from
userspace. In this scenario rx_channel may not be having a valid pointer
hence fetch the target operating channel to avoid warnings as below
which can be triggered by the commands with DFS testing over longer run

comamnds:
iw wlan1 set type mesh
ifconfig wlan1 up (valid tgt_oper_chan only)
iw wlan1 cac trigger freq 5260 HT20 (valid rx_channel, tgt_oper_chan)
iw wlan1 cac trigger freq 5280 HT20
iw wlan1 cac trigger freq 5300 HT20

Once the CAC expires, current channel context will be removed and
we are only left with the fallback option of using 'target operating
channel'

Firmware and driver log:
ath: phy1: DFS: radar found on freq=5300: id=1, pri=1125, count=5,
count_false=4
ath: phy1: DFS: radar found on freq=5260: id=5, pri=3151, count=6,
count_false=11
ath: phy1: DFS: radar found on freq=5280: id=1, pri=1351, count=6,
count_false=4
ath: phy1: DFS: radar found on freq=5300: id=1, pri=1125, count=5,
count_false=4
ath10k_pci 0001:01:00.0: failed to derive channel for radar pulse,
treating as radar
ath10k_pci 0001:01:00.0: failed to derive channel for radar pulse,
treating as radar

Call trace:

WARNING: CPU: 1 PID: 2145 at
backports-20161201-3.14.77-9ab3068/net/wireless/chan.c:265
cfg80211_set_dfs_state+0x3c/0x88 [cfg80211]()

 Workqueue: phy1 ieee80211_dfs_radar_detected_work
[mac80211]
[<c0320770>] (warn_slowpath_null) from [<bf79b90c>]
(cfg80211_set_dfs_state+0x3c/0x88 [cfg80211])
[<bf79b90c>] (cfg80211_set_dfs_state [cfg80211]) from
[<bf79697c>] (cfg80211_radar_event+0xc4/0x140 [cfg80211])
[<bf79697c>] (cfg80211_radar_event [cfg80211]) from
[<bf83c058>] (ieee80211_dfs_radar_detected_work+0xa8/0xb4 [mac80211])
[<bf83c058>] (ieee80211_dfs_radar_detected_work
[mac80211]) from [<c0339518>] (process_one_work+0x298/0x4a4)

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: disallow DFS simulation if DFS channel is not enabled

[ Upstream commit ca07baab0b1e627ae1d4a55d190fb1c9d32a3445 ]

If DFS is not enabled in hostapd (ieee80211h=0) DFS channels shall
not be available for use even though the hardware may have the capability
to support DFS. With this configuration (DFS disabled in hostapd) trying to
bring up ath10k device in DFS channel for AP mode fails and trying to
simulate DFS in ath10k debugfs results in a warning in cfg80211 complaining
invalid channel and this should be avoided in the driver itself rather than
false propogating RADAR detection to mac80211/cfg80211. Fix this by
checking for the first vif 'is_started' state(should work for client mode
as well) as all the vifs shall be configured for the same channel

sys/kernel/debug/ieee80211/phy1/ath10k# echo 1 > dfs_simulate_radar

WARNING: at net/wireless/chan.c:265 cfg80211_radar_event+0x24/0x60
Workqueue: phy0 ieee80211_dfs_radar_detected_work [mac80211]
[<c022f2d4>] (warn_slowpath_null) from
[<bf72dab8>] (cfg80211_radar_event+0x24/0x60 [cfg80211])
[<bf72dab8>] (cfg80211_radar_event [cfg80211]) from
[<bf7813e0>] (ieee80211_dfs_radar_detected_work+0x94/0xa0 [mac80211])
[<bf7813e0>] (ieee80211_dfs_radar_detected_work [mac80211]) from
[<c0242320>] (process_one_work+0x20c/0x32c)

WARNING: at net/wireless/nl80211.c:2488 nl80211_get_mpath+0x13c/0x4cc
 Workqueue: phy0 ieee80211_dfs_radar_detected_work [mac80211]
[<c022f2d4>] (warn_slowpath_null) from
[<bf72dab8>] (cfg80211_radar_event+0x24/0x60 [cfg80211])
[<bf72dab8>] (cfg80211_radar_event [cfg80211]) from
[<bf7813e0>] (ieee80211_dfs_radar_detected_work+0x94/0xa0 [mac80211])
[<bf7813e0>] (ieee80211_dfs_radar_detected_work [mac80211]) from
[<c0242320>] (process_one_work+0x20c/0x32c)

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)

[ Upstream commit 608b20506941969ea30d8c08dc9ae02bb87dbf7d ]

On vblank instant-off systems, we can get into a situation where the cost
of enabling and disabling the vblank IRQ around a drmWaitVblank query
dominates. And with the advent of even deeper hardware sleep state,
touching registers becomes ever more expensive.  However, we know that if
the user wants the current vblank counter, they are also very likely to
immediately queue a vblank wait and so we can keep the interrupt around
and only turn it off if we have no further vblank requests queued within
the interrupt interval.

After vblank event delivery, this patch adds a shadow of one vblank where
the interrupt is kept alive for the user to query and queue another vblank
event. Similarly, if the user is using blocking drmWaitVblanks, the
interrupt will be disabled on the IRQ following the wait completion.
However, if the user is simply querying the current vblank counter and
timestamp, the interrupt will be disabled after every IRQ and the user
will enabled it again on the first query following the IRQ.

v2: Mario Kleiner -
After testing this, one more thing that would make sense is to move
the disable block at the end of drm_handle_vblank() instead of at the
top.

Turns out that if high precision timestaming is disabled or doesn't
work for some reason (as can be simulated by echo 0 >
/sys/module/drm/parameters/timestamp_precision_usec), then with your
delayed disable code at its current place, the vblank counter won't
increment anymore at all for instant queries, ie. with your other
"instant query" patches. Clients which repeatedly query the counter
and wait for it to progress will simply hang, spinning in an endless
query loop. There's that comment in vblank_disable_and_save:

"* Skip this step if there isn't any high precision timestamp
 * available. In that case we can't account for this and just
 * hope for the best.
 */

With the disable happening after leading edge of vblank (== hw counter
increment already happened) but before the vblank counter/timestamp
handling in drm_handle_vblank, that step is needed to keep the counter
progressing, so skipping it is bad.

Now without high precision timestamping support, a kms driver must not
set dev->vblank_disable_immediate = true, as this would cause problems
for clients, so this shouldn't matter, but it would be good to still
make this robust against a future kms driver which might have
unreliable high precision timestamping, e.g., high precision
timestamping that intermittently doesn't work.

v3: Patch before coffee needs extra coffee.

Testcase: igt/kms_vblank
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Dave Airlie <airlied@redhat.com>,
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315204027.20160-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: net: xgene: Fix Rx checksum validation logic

[ Upstream commit 0a0400c3094b5d5cedd479ddbf1329de74c09c4b ]

This patch fixes Rx checksum validation logic and
adds NETIF_F_RXCSUM flag.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: net: xgene: Fix wrong logical operation

[ Upstream commit 11623fce0f9afef30c45e3f2120b063de3809a8f ]

This patch fixes the wrong logical OR operation by changing it to
bit-wise OR operation.

Fixes: 3bb502f83080 ("drivers: net: xgene: fix statistics counters race condition")
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: net: phy: xgene: Fix mdio write

[ Upstream commit 4b72436dc3dd2457056b22d6f147777368c869fa ]

This patches fixes a typo in the argument to xgene_enet_wr_mdio_csr().

Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: net: xgene: Fix hardware checksum setting

[ Upstream commit e026e700d940a1ea3d3bc84d92ac668b1f015462 ]

This patch fixes the hardware checksum settings by properly program
the classifier. Otherwise, packet may be received with checksum error
on X-Gene1 SoC.

Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: brcmstb: Enable ZONE_DMA for non 64-bit capable peripherals

[ Upstream commit 3c51b9c7f1fae00c25f1e34da649a288e3fea1ae ]

Some Host Controller hardware blocks, like the OHCI, EHCI and SDIO
controllers, have hardware blocks that are not capable of doing 64 bit
DMA. These host controllers fail on boards with >3GB of memory because
the memory above 3GB is located physically >= 0x100000000 and can only
be accessed using 64 DMA. The way Linux is currently configured for
BRCMSTB systems, the memory given to drivers for DMA through functions
like dma_alloc_coherent() comes from CMA memory and CMA memory is taken
from the top of physical memory. When these drivers get a DMA buffer
with an address >=0x100000000, they end up dropping the upper 32 bit of
the address causing the hardware to DMA to incorrect memory, typically
BMEM (custom memory carveout). This issue was discovered on a
BCM97449SSV_DDR4 system with 4GB or memory.

The fix is to enable CONFIG_ZONE_DMA. On ARM systems this makes sure
that all DMA memory is located within the first 32 bits of address
space.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Make perf_event__synthesize_mmap_events() scale

[ Upstream commit 88b897a30c525c2eee6e7f16e1e8d0f18830845e ]

This patch significantly improves the execution time of
perf_event__synthesize_mmap_events() when running perf record on systems
where processes have lots of threads.

It just happens that cat /proc/pid/maps support uses a O(N^2) algorithm to
generate each map line in the maps file.  If you have 1000 threads, then you
have necessarily 1000 stacks.  For each vma, you need to check if it
corresponds to a thread's stack.  With a large number of threads, this can take
a very long time. I have seen latencies >> 10mn.

As of today, perf does not use the fact that a mapping is a stack, therefore we
can work around the issue by using /proc/pid/tasks/pid/maps.  This entry does
not try to map a vma to stack and is thus much faster with no loss of
functonality.

The proc-map-timeout logic is kept in case users still want some upper limit.

In V2, we fix the file path from /proc/pid/tasks/pid/maps to actual
/proc/pid/task/pid/maps, tasks -> task.  Thanks Arnaldo for catching this.

Committer note:

This problem seems to have been elliminated in the kernel since commit :
b18cb64ead40 ("fs/proc: Stop trying to report thread stacks").

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170315135059.GC2177@redhat.com
Link: http://lkml.kernel.org/r/1489598233-25586-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: fix ethtool to get EEPROM data from X722 interface

[ Upstream commit c271dd6c391b535226cf1a81aaad9f33cb5899d3 ]

Currently ethtool -e will error out with a X722 interface
as its EEPROM has a scope limit at offset 0x5B9FFF.
This patch fixes the issue by setting the EEPROM length to
the scope limit to avoid NVM read failure beyond that.

Change-ID: I0b7d4dd6c7f2a57cace438af5dffa0f44c229372
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Acquire NVM lock before reads on all devices

[ Upstream commit 96a39aed25e6559b160786117df124084feb9080 ]

Acquire NVM lock before reads on all devices.  Previously, locks were
only used for X722 and later.  Fixes an issue where simultaneous X710
NVM accesses were interfering with each other.

Change-ID: If570bb7acf958cef58725ec2a2011cead6f80638
Signed-off-by: Aaron Salter <aaron.k.salter@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eventpoll.h: fix epoll event masks

[ Upstream commit 6f051e4a685b768f3704c7c069aa1edee3010622 ]

[resend due to me forgetting to cc: linux-api the first time around I
posted these back on Feb 23]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When userspace tries to use these defines, it complains that it needs to
be an unsigned 1 that is shifted, so libc implementations have to create
their own version.  Fix this by defining it properly so that libcs can
just use the kernel uapi header.

Reported-by: Elliott Hughes <enh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce: Handle broadcasted MCE gracefully with kexec

[ Upstream commit 5bc329503e8191c91c4c40836f062ef771d8ba83 ]

When we are about to kexec a crash kernel and right then and there a
broadcasted MCE fires while we're still in the first kernel and while
the other CPUs remain in a holding pattern, the #MC handler of the
first kernel will timeout and then panic due to never completing MCE
synchronization.

Handle this in a similar way as to when the CPUs are offlined when that
broadcasted MCE happens.

[ Boris: rewrote commit message and comments. ]

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: kexec@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1487857012-9059-1-git-send-email-xlpang@redhat.com
Link: http://lkml.kernel.org/r/20170313095019.19351-1-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf sort: Fix segfault with basic block 'cycles' sort dimension

[ Upstream commit 4b0b3aa6a2756e6115fdf275c521e4552a7082f3 ]

Skip the sample which doesn't have branch_info to avoid segmentation
fault:

The fault can be reproduced by:

  perf record -a
  perf report -F cycles

Signed-off-by: Changbin Du <changbin.du@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 0e332f033a82 ("perf tools: Add support for cycles, weight branch_info field")
Link: http://lkml.kernel.org/r/20170313083148.23568-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Make mmap(MAP_32BIT) work correctly

[ Upstream commit 3e6ef9c80946f781fc25e8490c9875b1d2b61158 ]

mmap(MAP_32BIT) is broken due to the dependency on the TIF_ADDR32 thread
flag.

For 64bit applications MAP_32BIT will force legacy bottom-up allocations and
the 1GB address space restriction even if the application issued a compat
syscall, which should not be subject of these restrictions.

For 32bit applications, which issue 64bit syscalls the newly introduced
mmap base separation into 64-bit and compat bases changed the behaviour
because now a 64-bit mapping is returned, but due to the TIF_ADDR32
dependency MAP_32BIT is ignored. Before the separation a 32-bit mapping was
returned, so the MAP_32BIT handling was irrelevant.

Replace the check for TIF_ADDR32 with a check for the compat syscall. That
solves both the 64-bit issuing a compat syscall and the 32-bit issuing a
64-bit syscall problems.

[ tglx: Massaged changelog ]

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170306141721.9188-5-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: check for address length in selinux_socket_bind()

[ Upstream commit e2f586bd83177d22072b275edd4b8b872daba924 ]

KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of
uninitialized memory in selinux_socket_bind():

==================================================================
BUG: KMSAN: use of unitialized memory
inter: 0
CPU: 3 PID: 1074 Comm: packet2 Tainted: G    B           4.8.0-rc6+ #1916
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 0000000000000000 ffff8800882ffb08 ffffffff825759c8 ffff8800882ffa48
 ffffffff818bf551 ffffffff85bab870 0000000000000092 ffffffff85bab550
 0000000000000000 0000000000000092 00000000bb0009bb 0000000000000002
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff825759c8>] dump_stack+0x238/0x290 lib/dump_stack.c:51
 [<ffffffff818bdee6>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1008
 [<ffffffff818bf0fb>] __msan_warning+0x5b/0xb0 mm/kmsan/kmsan_instr.c:424
 [<ffffffff822dae71>] selinux_socket_bind+0xf41/0x1080 security/selinux/hooks.c:4288
 [<ffffffff8229357c>] security_socket_bind+0x1ec/0x240 security/security.c:1240
 [<ffffffff84265d98>] SYSC_bind+0x358/0x5f0 net/socket.c:1366
 [<ffffffff84265a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
 [<ffffffff81005678>] do_syscall_64+0x58/0x70 arch/x86/entry/common.c:292
 [<ffffffff8518217c>] entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.o:?
chained origin: 00000000ba6009bb
 [<ffffffff810bb7a7>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67
 [<     inline     >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322
 [<     inline     >] kmsan_save_stack mm/kmsan/kmsan.c:337
 [<ffffffff818bd2b8>] kmsan_internal_chain_origin+0x118/0x1e0 mm/kmsan/kmsan.c:530
 [<ffffffff818bf033>] __msan_set_alloca_origin4+0xc3/0x130 mm/kmsan/kmsan_instr.c:380
 [<ffffffff84265b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356
 [<ffffffff84265a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
 [<ffffffff81005678>] do_syscall_64+0x58/0x70 arch/x86/entry/common.c:292
 [<ffffffff8518217c>] return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.o:?
origin description: ----address@SYSC_bind (origin=00000000b8c00900)
==================================================================

(the line numbers are relative to 4.8-rc6, but the bug persists upstream)

, when I run the following program as root:

=======================================================
  #include <string.h>
  #include <sys/socket.h>
  #include <netinet/in.h>

  int main(int argc, char *argv[]) {
    struct sockaddr addr;
    int size = 0;
    if (argc > 1) {
      size = atoi(argv[1]);
    }
    memset(&addr, 0, sizeof(addr));
    int fd = socket(PF_INET6, SOCK_DGRAM, IPPROTO_IP);
    bind(fd, &addr, size);
    return 0;
  }
=======================================================

(for different values of |size| other error reports are printed).

This happens because bind() unconditionally copies |size| bytes of
|addr| to the kernel, leaving the rest uninitialized. Then
security_socket_bind() reads the IP address bytes, including the
uninitialized ones, to determine the port, or e.g. pass them further to
sel_netnode_find(), which uses them to calculate a hash.

Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
[PM: fixed some whitespace damage]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()

[ Upstream commit fda78d7a0ead144f4b2cdb582dcba47911f4952c ]

The pci_bus_type .shutdown method, pci_device_shutdown(), is called from
device_shutdown() in the kernel restart and shutdown paths.

Previously, pci_device_shutdown() called pci_msi_shutdown() and
pci_msix_shutdown().  This disables MSI and MSI-X, which causes the device
to fall back to raising interrupts via INTx.  But the driver is still bound
to the device, it doesn't know about this change, and it likely doesn't
have an INTx handler, so these INTx interrupts cause "nobody cared"
warnings like this:

  irq 16: nobody cared (try booting with the "irqpoll" option)
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.2-1.el7_UNSUPPORTED.x86_64 #1
  Hardware name: Hewlett-Packard HP Z820 Workstation/158B, BIOS J63 v03.90 06/
  ...

The MSI disabling code was added by d52877c7b1af ("pci/irq: let
pci_device_shutdown to call pci_msi_shutdown v2") because a driver left MSI
enabled and kdump failed because the kexeced kernel wasn't prepared to
receive the MSI interrupts.

Subsequent commits 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even
if kernel doesn't support MSI") and  e80e7edc55ba ("PCI/MSI: Initialize MSI
capability for all architectures") changed the kexeced kernel to disable
all MSIs itself so it no longer depends on the crashed kernel to clean up
after itself.

Stop disabling MSI/MSI-X in pci_device_shutdown().  This resolves the
"nobody cared" unhandled IRQ issue above.  It also allows PCI serial
devices, which may rely on the MSI interrupts, to continue outputting
messages during reboot/shutdown.

[bhelgaas: changelog, drop pci_msi_shutdown() and pci_msix_shutdown() calls
altogether]
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=187351
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: David Arcari <darcari@redhat.com>
CC: Myron Stowe <mstowe@redhat.com>
CC: Lukas Wunner <lukas@wunner.de>
CC: Keith Busch <keith.busch@intel.com>
CC: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: Fix TCON clock and regmap initialization sequence

[ Upstream commit 4c7f16d14a33a9cfb4af9cb780d8a73bcca64a92 ]

The TCON driver calls sun4i_tcon_init_regmap and sun4i_tcon_init_clocks
in its bind function. The former creates a regmap and writes to several
register to clear its configuration to a known default. The latter
initializes various clocks. This includes enabling the bus clock for
register access and creating the dotclock.

In order for the first step's writes to work, the bus clock must be
enabled which is done in the second step. but the dotclock's ops use
the regmap created in the first step.

Rearrange the function calls such that the clocks are initialized before
the regmap, and split out the dot clock creation to after the regmap is
initialized.

Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: fix a warning during channel switch with multiple vaps

[ Upstream commit c73f8c00330f59ce9b1ace9ff698aca83390d358 ]

Doing a channel switch via hostapd_cli seems to update
the new channel context for each VAP's appropriately as below
in 'ath10k_mac_update_vif_chan', hence we can safely suppress the
warning that shows up during this operation and dump the warning only
if no vaps are available for channel switch

hostapd_cli -i wlan0 chan_switch 5 5200
OK

ath10k_pci : mac chanctx switch n_vifs 3 mode 1
ath10k_pci : mac chanctx switch vdev_id 2 freq 5180->5200 width 0->0
ath10k_pci : mac chanctx switch vdev_id 1 freq 5180->5200 width 0->0
ath10k_pci : mac chanctx switch vdev_id 0 freq 5180->5200 width 0->0

Call Trace:

WARNING: backports-20161201-3.14.77-9ab3068/drivers/net/wireless/ath/ath10k/mac.c:7126
[<c022f2d4>] (warn_slowpath_null) from [<bf7f150c>]
(ath10k_reconfig_complete+0xe4/0x25c [ath10k_core])
[<bf7f150c>] (ath10k_reconfig_complete [ath10k_core])
[<bf7f35f0>] (ath10k_mac_vif_ap_csa_work+0x214/0x370 [ath10k_core])
[<bf7f38b8>] (ath10k_mac_op_change_chanctx+0x108/0x128 [ath10k_core])
[<bf782ac0>] (ieee80211_recalc_chanctx_min_def+0x30c/0x430 [mac80211])
[<bf7830a4>] (ieee80211_recalc_smps_chanctx+0x2ec/0x840 [mac80211])
[<bf7843e8>] (ieee80211_vif_use_reserved_context+0x7c/0xf8 [mac80211])
[<bf7843e8>] (ieee80211_vif_use_reserved_context [mac80211])
[<bf76e5d4>] (ieee80211_csa_finalize_work+0x5c/0x88 [mac80211])

Fixes: d7bf4b4aba05 ("ath10k: fix ar->rx_channel updating logic")
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: Set drm_crtc.port to the underlying TCON's output port node

[ Upstream commit 7544860733d158e3edbf309f27e79e258c8f66bd ]

The way drm_of_find_possible_crtcs works is it tries to match the
remote-endpoint of the given node's various endpoints to all the
crtc's .port field. Thus we need to set drm_crtc.port to the output
port node of the underlying TCON.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/sun4i: Fix up error path cleanup for master bind function

[ Upstream commit 9d56defb44b15427f4342c543a70fb7886fc06f5 ]

The master bind function calls numerous drm functions which initialize
underlying structures. It also tries to bind the various components
of the display pipeline, some of which may add additional drm objects.

This patch adds proper cleanup functions in the error path of the
master bind function.

This requires the patch "drm/sun4i: Move drm_mode_config_cleanup call
to main driver", which splits out drm_mode_config_cleanup from
sun4i_framebuffer_free so we can call it separately.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: r8a7796: Remove unit-address and reg from integrated cache

[ Upstream commit 57a4fd420c6e8a04b6a87ff24d34250cd7c48f15 ]

The Cortex-A57 cache controller is an integrated controller, and thus
the device node representing it should not have a unit-addresses or reg
property.

Fixes: 1561f20760ec96db ("arm64: dts: r8a7796: Add Renesas R8A7796 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: r8a7794: Remove unit-address and reg from integrated cache

[ Upstream commit 65d0b7ed40f8a3a41a0ac5ed5ca4d1874c6aaf2d ]

The Cortex-A7 cache controller is an integrated controller, and thus the
device node representing it should not have a unit-addresses or reg
property.

Fixes: 34ea4b4a827b4ee7 ("ARM: dts: r8a7794: Fix W=1 dtc warnings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: r8a7793: Remove unit-address and reg from integrated cache

[ Upstream commit beffa8872a3680ef804eb0320ec77037170f4686 ]

The Cortex-A15 cache controller is an integrated controller, and thus
the device node representing it should not have a unit-addresses or reg
property.

Fixes: ad53f5f00b095a0d ("ARM: dts: r8a7793: Fix W=1 dtc warnings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: r8a7792: Remove unit-address and reg from integrated cache

[ Upstream commit a0504f0880c11da301dc2b5a5135bd02376e367e ]

The Cortex-A15 cache controller is an integrated controller, and thus
the device node representing it should not have a unit-addresses or reg
property.

Fixes: 7c4163aae3d8e5b9 ("ARM: dts: r8a7792: initial SoC device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: r8a7791: Remove unit-address and reg from integrated cache

[ Upstream commit 5d6a2165abd4635ecf5ece3d02fe8677f00d32c5 ]

The Cortex-A15 cache controller is an integrated controller, and thus
the device node representing it should not have a unit-addresses or reg
property.

Fixes: 6f9314ce258c8504 ("ARM: dts: r8a7791: Fix W=1 dtc warnings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: qxl: Don't alloc fbdev if emulation is not supported

[ Upstream commit 861078381ba56b56808113736000d9e7ead349c8 ]

If fbdev emulation is disabled, the QXL shutdown path will try to clean
a framebuffer that wasn't initialized, hitting the Oops below.  The
problem is that even when FBDEV_EMULATION is disabled we allocate the
qfbdev strutucture, but we don't initialize it.  The fix is to stop
allocating the memory, since it won't be used.  This allows the existing
verification in the cleanup hook to do it's job preventing the oops.

Now that we don't allocate the unused fbdev structure, we need to be
careful when dereferencing it in the PM suspend hook.

[   24.284684] BUG: unable to handle kernel NULL pointer dereference at 00000000000002e0
[   24.285627] IP: mutex_lock+0x18/0x30
[   24.286049] PGD 78cdf067
[   24.286050] PUD 7940f067
[   24.286344] PMD 0
[   24.286649]
[   24.287072] Oops: 0002 [#1] SMP
[   24.287422] Modules linked in: qxl
[   24.287806] CPU: 0 PID: 2328 Comm: bash Not tainted 4.10.0-rc5+ #97
[   24.288515] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[   24.289681] task: ffff88007c4c0000 task.stack: ffffc90001b58000
[   24.290354] RIP: 0010:mutex_lock+0x18/0x30
[   24.290812] RSP: 0018:ffffc90001b5bcb0 EFLAGS: 00010246
[   24.291401] RAX: 0000000000000000 RBX: 00000000000002e0 RCX: 0000000000000000
[   24.292209] RDX: ffff88007c4c0000 RSI: 0000000000000001 RDI: 00000000000002e0
[   24.292987] RBP: ffffc90001b5bcb8 R08: fffffffffffffffe R09: 0000000000000001
[   24.293797] R10: ffff880078d80b80 R11: 0000000000011400 R12: 0000000000000000
[   24.294601] R13: 00000000000002e0 R14: ffffffffa0009c28 R15: 0000000000000060
[   24.295439] FS:  00007f30e3acbb40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[   24.296364] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.296997] CR2: 00000000000002e0 CR3: 0000000078c7b000 CR4: 00000000000006f0
[   24.297813] Call Trace:
[   24.298097]  drm_framebuffer_cleanup+0x1f/0x70
[   24.298612]  qxl_fbdev_fini+0x68/0x90 [qxl]
[   24.299074]  qxl_modeset_fini+0xd/0x30 [qxl]
[   24.299562]  qxl_pci_remove+0x22/0x50 [qxl]
[   24.300025]  pci_device_remove+0x34/0xb0
[   24.300507]  device_release_driver_internal+0x150/0x200
[   24.301082]  device_release_driver+0xd/0x10
[   24.301587]  unbind_store+0x108/0x150
[   24.301993]  drv_attr_store+0x20/0x30
[   24.302402]  sysfs_kf_write+0x32/0x40
[   24.302827]  kernfs_fop_write+0x108/0x190
[   24.303269]  __vfs_write+0x23/0x120
[   24.303678]  ? security_file_permission+0x36/0xb0
[   24.304193]  ? rw_verify_area+0x49/0xb0
[   24.304636]  vfs_write+0xb0/0x190
[   24.305004]  SyS_write+0x41/0xa0
[   24.305362]  entry_SYSCALL_64_fastpath+0x1a/0xa9
[   24.305887] RIP: 0033:0x7f30e31d9620
[   24.306285] RSP: 002b:00007ffc54b47e68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   24.307128] RAX: ffffffffffffffda RBX: 00007f30e3497600 RCX: 00007f30e31d9620
[   24.307928] RDX: 000000000000000d RSI: 0000000000da2008 RDI: 0000000000000001
[   24.308727] RBP: 000000000070bc60 R08: 00007f30e3498760 R09: 00007f30e3acbb40
[   24.309504] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000001
[   24.310295] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc54b47f34
[   24.311095] Code: 0e 01 e9 7b fe ff ff 66 90 66 2e 0f 1f 84 00 00 00 00 00
55 48 89 e5 53 48 89 fb e8 83 e8 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <3e>
48 0f b1 13 48 85 c0 74 08 48 89 df e8 66 fd ff ff 5b 5d c3
[   24.313182] RIP: mutex_lock+0x18/0x30 RSP: ffffc90001b5bcb0
[   24.313811] CR2: 00000000000002e0
[   24.314208] ---[ end trace 29669c1593cae14b ]---

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170227203330.18542-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: reject input outside logical range only if null state is set

[ Upstream commit 3f3752705dbd50b66b66ad7b4d54fe33d2f746ed ]

This patch fixes an issue in drivers/hid/hid-input.c where USB HID
control null state flag is not checked upon rejecting inputs outside
logical minimum-maximum range. The check should be made according to USB
HID specification 1.11, section 6.2.2.5, p.31. The fix will resolve
issues with some game controllers, such as:
https://bugzilla.kernel.org/show_bug.cgi?id=68621

[tk@the-tk.com: shortened and fixed spelling in commit message]
Signed-off-by: Valtteri Heikkilä <rnd@nic.fi>
Signed-off-by: Tomasz Kramkowski <tk@the-tk.com>
Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: add check for kmalloc allocation failure.

[ Upstream commit 6cc0c259d034c6ab48f4e12f505213988e73d380 ]

Add a sanity check that wid.val has been allocated, fixes a null
pointer deference on stamac when calling ether_add_copy.

Detected by CoverityScan, CID#1369537 ("Dereference null return value")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: Replace BUG_ON() with WARN_ON().

[ Upstream commit d351c2db5420bb17dcd2d9aac7ddb5f64c6d04b3 ]

BUG_ON() is replaced with WARN_ON() and EINVAL is returned, when
WARN_ON() is true. This fixes the following checkpatch issue:

Avoid crashing the kernel - try using WARN_ON & recovery code rather
than BUG() or BUG_ON().

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf stat: Issue a HW watchdog disable hint

[ Upstream commit 02d492e5dcb72c004d213756eb87c9d62a6d76a7 ]

When using perf stat on an AMD F15h system with the default hw events
attributes, some of the events don't get counted:

 Performance counter stats for 'sleep 1':

          0.749208      task-clock (msec)         #    0.001 CPUs utilized
                 1      context-switches          #    0.001 M/sec
                 0      cpu-migrations            #    0.000 K/sec
                54      page-faults               #    0.072 M/sec
         1,122,815      cycles                    #    1.499 GHz
           286,740      stalled-cycles-frontend   #   25.54% frontend cycles idle
     <not counted>      stalled-cycles-backend                                        (0.00%)
     ^^^^^^^^^^^^
     <not counted>      instructions                                                  (0.00%)
     ^^^^^^^^^^^^
     <not counted>      branches                                                      (0.00%)
     <not counted>      branch-misses                                                 (0.00%)

       1.001550070 seconds time elapsed

The reason is that we have the HW watchdog consuming one PMU counter and
when perf tries to schedule 6 events on 6 counters and some of those
counters are constrained to only a specific subset of PMCs by the
hardware, the event scheduling fails.

So issue a hint to disable the HW watchdog around a perf stat session.

Committer note:

Testing it...

  # perf stat -d usleep 1

   Performance counter stats for 'usleep 1':

          1.180203      task-clock (msec)         #    0.490 CPUs utilized
                 1      context-switches          #    0.847 K/sec
                 0      cpu-migrations            #    0.000 K/sec
                54      page-faults               #    0.046 M/sec
           184,754      cycles                    #    0.157 GHz
           714,553      instructions              #    3.87  insn per cycle
           154,661      branches                  #  131.046 M/sec
             7,247      branch-misses             #    4.69% of all branches
           219,984      L1-dcache-loads           #  186.395 M/sec
            17,600      L1-dcache-load-misses     #    8.00% of all L1-dcache hits    (90.16%)
     <not counted>      LLC-loads                                                     (0.00%)
     <not counted>      LLC-load-misses                                               (0.00%)

       0.002406823 seconds time elapsed

  Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
  #

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/20170211183218.ijnvb5f7ciyuunx4@pd.tnic
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: tsc2007 - check for presence and power down tsc2007 during probe

[ Upstream commit 934df23171e7c5b71d937104d4957891c39748ff ]

1. check if chip is really present and don't succeed if it isn't.
2. if it succeeds, power down the chip until accessed

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blkcg: fix double free of new_blkg in blkcg_init_queue

commit 9b54d816e00425c3a517514e0d677bb3cec49258 upstream.

If blkg_create fails, new_blkg passed as an argument will
be freed by blkg_create, so there is no need to free it again.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.88

PCI: dwc: Fix enumeration end when reaching root subordinate

commit fc110ebdd014dd1368c98e7685b47789c31fab42 upstream.

The subordinate value indicates the highest bus number which can be
reached downstream though a certain device.

Commit a20c7f36bd3d ("PCI: Do not allocate more buses than available in
parent") ensures that downstream devices cannot assign busnumbers higher
than the upstream device subordinate number, which was indeed illogical.

By default, dw_pcie_setup_rc() inits the Root Complex subordinate to a
value of 0x01.

Due to this combined with above commit, enumeration stops digging deeper
downstream as soon as bus num 0x01 has been assigned, which is always the
case for a bridge device.

This results in all devices behind a bridge bus remaining undetected, as
these would be connected to bus 0x02 or higher.

Fix this by initializing the RC to a subordinate value of 0xff, which is
not altering hardware behaviour in any way, but informs probing function
pci_scan_bridge() later on which reads this value back from register.

The following nasty errors during boot are also fixed by this:

  pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01] (conflicts with (null) [bus 01])
  ...
  pci_bus 0000:03: [bus 03] partially hidden behind bridge 0000:01 [bus 01]
  ...
  pci_bus 0000:04: [bus 04] partially hidden behind bridge 0000:01 [bus 01]
  ...
  pci_bus 0000:05: [bus 05] partially hidden behind bridge 0000:01 [bus 01]
  pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
  pci_bus 0000:02: busn_res: can not insert [bus 02-05] under [bus 01] (conflicts with (null) [bus 01])
  pci_bus 0000:02: [bus 02-05] partially hidden behind bridge 0000:01 [bus 01]

Fixes: a20c7f36bd3d ("PCI: Do not allocate more buses than available in
parent")
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Cc: stable@vger.kernel.org # v4.15+
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jianguo Sun <sunjianguo1@huawei.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Minghuan Lian <minghuan.Lian@freescale.com>
Cc: Mingkai Hu <mingkai.hu@freescale.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
[fabio: adapted to the file location of 4.9 kernel]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

earlycon: add reg-offset to physical address before mapping

commit 1f66dd36bb18437397ea0d7882c52f7e3c476e15 upstream.

It will get the wrong virtual address because port->mapbase is not added
the correct reg-offset yet. We have to update it before earlycon_map()
is called

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: stable@vger.kernel.org
Fixes: 088da2a17619 ("of: earlycon: Initialize port fields from DT properties")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: core: mark port as initialized in autoconfig

commit 714569064adee3c114a2a6490735b94abe269068 upstream.

This is a followup on 44117a1d1732 ("serial: core: mark port as
initialized after successful IRQ change").
Nikola has been using autoconfig via setserial and reported a crash
similar to what I fixed in the earlier mentioned commit. Here I do the
same fixup for the autoconfig. I wasn't sure that this is the right
approach. Nikola confirmed that it fixes his crash.

Fixes: b3b576461864 ("tty: serial_core: convert uart_open to use tty_port_open")
Link: http://lkml.kernel.org/r/20180131072000.GD1853@localhost.localdomain
Reported-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_pci: Add Brainboxes UC-260 4 port serial device

commit 9f2068f35729948bde84d87a40d135015911345d upstream.

Add PCI ids for two variants of Brainboxes UC-260 quad port
PCI serial cards.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb()

commit 1a087f032111a88e826877449dfb93ceb22b78b9 upstream.

When I debug a kernel crash issue in funcitonfs, found ffs_data.ref
overflowed, While functionfs is unmounting, ffs_data is put twice.

Commit 43938613c6fd ("drivers, usb: convert ffs_data.ref from atomic_t to
refcount_t") can avoid refcount overflow, but that is risk some situations.
So no need put ffs data in ffs_fs_kill_sb, already put in ffs_data_closed.

The issue can be reproduced in Mediatek mt6763 SoC, ffs for ADB device.
KASAN enabled configuration reports use-after-free errro.

BUG: KASAN: use-after-free in refcount_dec_and_test+0x14/0xe0 at addr ffffffc0579386a0
Read of size 4 by task umount/4650
====================================================
BUG kmalloc-512 (Tainted: P        W  O   ): kasan: bad access detected
-----------------------------------------------------------------------------

INFO: Allocated in ffs_fs_mount+0x194/0x844 age=22856 cpu=2 pid=566
    alloc_debug_processing+0x1ac/0x1e8
    ___slab_alloc.constprop.63+0x640/0x648
    __slab_alloc.isra.57.constprop.62+0x24/0x34
    kmem_cache_alloc_trace+0x1a8/0x2bc
    ffs_fs_mount+0x194/0x844
    mount_fs+0x6c/0x1d0
    vfs_kern_mount+0x50/0x1b4
    do_mount+0x258/0x1034
INFO: Freed in ffs_data_put+0x25c/0x320 age=0 cpu=3 pid=4650
    free_debug_processing+0x22c/0x434
    __slab_free+0x2d8/0x3a0
    kfree+0x254/0x264
    ffs_data_put+0x25c/0x320
    ffs_data_closed+0x124/0x15c
    ffs_fs_kill_sb+0xb8/0x110
    deactivate_locked_super+0x6c/0x98
    deactivate_super+0xb0/0xbc
INFO: Object 0xffffffc057938600 @offset=1536 fp=0x          (null)
......
Call trace:
[<ffffff900808cf5c>] dump_backtrace+0x0/0x250
[<ffffff900808d3a0>] show_stack+0x14/0x1c
[<ffffff90084a8c04>] dump_stack+0xa0/0xc8
[<ffffff900826c2b4>] print_trailer+0x158/0x260
[<ffffff900826d9d8>] object_err+0x3c/0x40
[<ffffff90082745f0>] kasan_report_error+0x2a8/0x754
[<ffffff9008274f84>] kasan_report+0x5c/0x60
[<ffffff9008273208>] __asan_load4+0x70/0x88
[<ffffff90084cd81c>] refcount_dec_and_test+0x14/0xe0
[<ffffff9008d98f9c>] ffs_data_put+0x80/0x320
[<ffffff9008d9d904>] ffs_fs_kill_sb+0xc8/0x110
[<ffffff90082852a0>] deactivate_locked_super+0x6c/0x98
[<ffffff900828537c>] deactivate_super+0xb0/0xbc
[<ffffff90082af0c0>] cleanup_mnt+0x64/0xec
[<ffffff90082af1b0>] __cleanup_mnt+0x10/0x18
[<ffffff90080d9e68>] task_work_run+0xcc/0x124
[<ffffff900808c8c0>] do_notify_resume+0x60/0x70
[<ffffff90080866e4>] work_pending+0x10/0x14

Cc: stable@vger.kernel.org
Signed-off-by: Xinyong <xinyong.fang@linux.alibaba.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: usbmon: Read text within supplied buffer size

commit a5f596830e27e15f7a0ecd6be55e433d776986d8 upstream.

This change fixes buffer overflows and silent data corruption with the
usbmon device driver text file read operations.

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: add control message delay for 1b1c:1b20

commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream.

Corsair Strafe RGB keyboard does not respond to usb control messages
sometimes and hence generates timeouts.

Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair
Strafe RGB keyboard") tried to fix those timeouts by adding
USB_QUIRK_DELAY_INIT.

Unfortunately, even with this quirk timeouts of usb_control_msg()
can still be seen, but with a lower frequency (approx. 1 out of 15):

[   29.103520] usb 1-8: string descriptor 0 read error: -110
[   34.363097] usb 1-8: can't set config #1, error -110

Adding further delays to different locations where usb control
messages are issued just moves the timeouts to other locations,
e.g.:

[   35.400533] usbhid 1-8:1.0: can't add hid device: -110
[   35.401014] usbhid: probe of 1-8:1.0 failed with error -110

The only way to reliably avoid those issues is having a pause after
each usb control message. In approx. 200 boot cycles no more timeouts
were seen.

Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary
to have the delay in hub_port_connect() after hub_port_init().

The overall boot time seems not to be influenced by these additional
delays, even on fast machines and lightweight distributions.

Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard")
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: vudc: fix null pointer dereference on udc->lock

commit df3334c223a033f562645712e832ca4cbb326bbf upstream.

Currently the driver attempts to spin lock on udc->lock before a NULL
pointer check is performed on udc, hence there is a potential null
pointer dereference on udc->lock.  Fix this by moving the null check
on udc before the lock occurs.

Fixes: ea6873a45a22 ("usbip: vudc: Add SysFS infrastructure for VUDC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h

commit 5126a504b63d82785eaece3a9c30c660b313785a upstream.

This USB-SATA controller seems to be similar with JMicron bridge
152d:2566 already on the list. Adding it here fixes "Invalid
field in cdb" errors.

Signed-off-by: Teijo Kinnunen <teijo.kinnunen@code-q.fi>
Cc: stable@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem: Fix lockdep issue during llseek

commit cb57469c9573f6018cd1302953dd45d6e05aba7b upstream.

ashmem_mutex create a chain of dependencies like so:

(1)
mmap syscall ->
  mmap_sem ->  (acquired)
  ashmem_mmap
  ashmem_mutex (try to acquire)
  (block)

(2)
llseek syscall ->
  ashmem_llseek ->
  ashmem_mutex ->  (acquired)
  inode_lock ->
  inode->i_rwsem (try to acquire)
  (block)

(3)
getdents ->
  iterate_dir ->
  inode_lock ->
  inode->i_rwsem   (acquired)
  copy_to_user ->
  mmap_sem         (try to acquire)

There is a lock ordering created between mmap_sem and inode->i_rwsem
causing a lockdep splat [2] during a syzcaller test, this patch fixes
the issue by unlocking the mutex earlier. Functionally that's Ok since
we don't need to protect vfs_llseek.

[1] https://patchwork.kernel.org/patch/10185031/
[2] https://lkml.org/lkml/2018/1/10/48

Acked-by: Todd Kjos <tkjos@google.com>
Cc: Arve Hjonnevag <arve@android.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+8ec30bb7bf1a981a2012@syzkaller.appspotmail.com
Signed-off-by: Joel Fernandes <joelaf@google.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: fix comedi_nsamples_left.

commit a42ae5905140c324362fe5036ae1dbb16e4d359c upstream.

A rounding error was causing comedi_nsamples_left to
return the wrong value when nsamples was not a multiple
of the scan length.

Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Frank Mori Hess <fmh6jj@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uas: fix comparison for error code

commit 9a513c905bb95bef79d96feb08621c1ec8d8c4bb upstream.

A typo broke the comparison.

Fixes: cbeef22fd611 ("usb: uas: unconditionally bring back host after reset")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@kernel.org
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty/serial: atmel: add new version check for usart

commit fd63a8903a2c40425a9811c3371dd4d0f42c0ad3 upstream.

On our at91sam9260 based board the usart0 and usart1 ports report
their versions (ATMEL_US_VERSION) as 0x10302. This version is not
included in the current checks in the driver.

Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sh-sci: prevent lockup on full TTY buffers

commit 7842055bfce4bf0170d0f61df8b2add8399697be upstream.

When the TTY buffers fill up to the configured maximum, a system lockup
occurs:

[  598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks:
[  598.825796]  0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1
[  598.832577]  (detected by 3, t=62517 jiffies, g=296, c=295, q=126)
[  598.838755] Task dump for CPU 0:
[  598.841977] swapper/0       R  running task        0     0      0 0x00000022
[  598.849023] Call trace:
[  598.851476]  __switch_to+0x98/0xb0
[  598.854870]            (null)

This can be prevented by doing a dummy read of the RX data register.

This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0;
reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms
as well.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable <stable@vger.kernel.org>
Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5651: Fix regcache sync errors on resume

commit 2d30e9494f1ea320aaaad0cff9ddd92c87eac355 upstream.

The ALC5651 does not like multi-write accesses, avoid them. This fixes:

rt5651 i2c-10EC5651:00: Unable to sync registers 0x27-0x28. -121

Errors on resume (and all registers after the registers in the error not
being synced).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: sgtl5000: Fix suspend/resume

commit a8992973edbb2555e956b90f6fe97c4bc14d761d upstream.

Commit 8419caa72702 ("ASoC: sgtl5000: Do not disable regulators in
SND_SOC_BIAS_OFF") causes the sgtl5000 to fail after a suspend/resume
sequence:

Playing WAVE '/media/a2002011001-e02.wav' : Signed 16 bit Little
Endian, Rate 44100 Hz, Stereo
aplay: pcm_write:2051: write error: Input/output error

The problem is caused by the fact that the aforementioned commit
dropped the cache handling, so re-introduce the register map
resync to fix the problem.

Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Treat R_X86_64_PLT32 as R_X86_64_PC32

commit b21ebf2fb4cde1618915a97cc773e287ff49173e upstream.

On i386, there are 2 types of PLTs, PIC and non-PIC.  PIE and shared
objects must use PIC PLT.  To use PIC PLT, you need to load
_GLOBAL_OFFSET_TABLE_ into EBX first.  There is no need for that on
x86-64 since x86-64 uses PC-relative PLT.

On x86-64, for 32-bit PC-relative branches, we can generate PLT32
relocation, instead of PC32 relocation, which can also be used as
a marker for 32-bit PC-relative branches.  Linker can always reduce
PLT32 relocation to PC32 if function is defined locally.   Local
functions should use PC32 relocation.  As far as Linux kernel is
concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32
since Linux kernel doesn't use PLT.

R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in
binutils master branch which will become binutils 2.31.

[ hjl is working on having better documentation on this all, but a few
  more notes from him:

   "PLT32 relocation is used as marker for PC-relative branches. Because
    of EBX, it looks odd to generate PLT32 relocation on i386 when EBX
    doesn't have GOT.

    As for symbol resolution, PLT32 and PC32 relocations are almost
    interchangeable. But when linker sees PLT32 relocation against a
    protected symbol, it can resolved locally at link-time since it is
    used on a branch instruction. Linker can't do that for PC32
    relocation"

  but for the kernel use, the two are basically the same, and this
  commit gets things building and working with the current binutils
  master   - Linus ]

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/module: Detect and skip invalid relocations

commit eda9cec4c9a12208a6f69fbe68f72a6311d50032 upstream.

There have been some cases where external tooling (e.g., kpatch-build)
creates a corrupt relocation which targets the wrong address.  This is a
silent failure which can corrupt memory in unexpected places.

On x86, the bytes of data being overwritten by relocations are always
initialized to zero beforehand.  Use that knowledge to add sanity checks
to detect such cases before they corrupt memory.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jeyu@kernel.org
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/37450d6c6225e54db107fba447ce9e56e5f758e9.1509713553.git.jpoimboe@redhat.com
[ Restructured the messages, as it's unclear whether the relocation or the target is corrupted. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix unstable write completion

commit c4f24df942a181699c5bab01b8e5e82b925f77f3 upstream.

We do want to respect the FLUSH_SYNC argument to nfs_commit_inode() to
ensure that all outstanding COMMIT requests to the inode in question are
complete. Currently we may exit early from both nfs_commit_inode() and
nfs_write_inode() even if there are COMMIT requests in flight, or unstable
writes on the commit list.

In order to get the right semantics w.r.t. sync_inode(), we don't need
to have nfs_commit_inode() reset the inode dirty flags when called from
nfs_wb_page() and/or nfs_wb_all(). We just need to ensure that
nfs_write_inode() leaves them in the right state if there are outstanding
commits, or stable pages.

Reported-by: Scott Mayhew <smayhew@redhat.com>
Fixes: dc4fd9ab01ab ("nfs: don't wait on commit in nfs_commit_inode()...")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix an incorrect type in struct nfs_direct_req

commit d9ee65539d3eabd9ade46cca1780e3309ad0f907 upstream.

The start offset needs to be of type loff_t.

Fixed: 5fadeb47dcc5c ("nfs: count DIO good bytes correctly with mirroring")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcport

commit 063b36d6b0ad74c748d536f5cb47bac2f850a0fa upstream.

Current code manually allocate an fcport structure that is not properly
initialize. Replace kzalloc with qla2x00_alloc_fcport, so that all
fields are initialized.  Also set set scan flag to port found

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubi: Fix race condition between ubi volume creation and udev

commit a51a0c8d213594bc094cb8e54aad0cb6d7f7b9a6 upstream.

Similar to commit 714fb87e8bc0 ("ubi: Fix race condition between ubi
device creation and udev"), we should make the volume active before
registering it.

Signed-off-by: Clay McClure <clay@daemons.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: inplace xattr block update fails to deduplicate blocks

commit ec00022030da5761518476096626338bd67df57a upstream.

When an xattr block has a single reference, block is updated inplace
and it is reinserted to the cache. Later, a cache lookup is performed
to see whether an existing block has the same contents. This cache
lookup will most of the time return the just inserted entry so
deduplication is not achieved.

Running the following test script will produce two xattr blocks which
can be observed in "File ACL: " line of debugfs output:

  mke2fs -b 1024 -I 128 -F -O extent /dev/sdb 1G
  mount /dev/sdb /mnt/sdb

  touch /mnt/sdb/{x,y}

  setfattr -n user.1 -v aaa /mnt/sdb/x
  setfattr -n user.2 -v bbb /mnt/sdb/x

  setfattr -n user.1 -v aaa /mnt/sdb/y
  setfattr -n user.2 -v bbb /mnt/sdb/y

  debugfs -R 'stat x' /dev/sdb | cat
  debugfs -R 'stat y' /dev/sdb | cat

This patch defers the reinsertion to the cache so that we can locate
other blocks with the same contents.

Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: pack percpu counter allocations

commit ae0ac0ed6fcf5af3be0f63eb935f483f44a402d2 upstream.

instead of allocating each xt_counter individually, allocate 4k chunks
and then use these for counter allocation requests.

This should speed up rule evaluation by increasing data locality,
also speeds up ruleset loading because we reduce calls to the percpu
allocator.

As Eric points out we can't use PAGE_SIZE, page_allocator would fail on
arches with 64k page size.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: pass xt_counters struct to counter allocator

commit f28e15bacedd444608e25421c72eb2cf4527c9ca upstream.

Keeps some noise away from a followup patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: pass xt_counters struct instead of packet counter

commit 4d31eef5176df06f218201bc9c0ce40babb41660 upstream.

On SMP we overload the packet counter (unsigned long) to contain
percpu offset.  Hide this from callers and pass xt_counters address
instead.

Preparation patch to allocate the percpu counters in page-sized batch
chunks.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pkt

commit b078556aecd791b0e5cb3a59f4c3a14273b52121 upstream.

l4proto->manip_pkt() can cause reallocation of skb head so pointer
to the ipv6 header must be reloaded.

Reported-and-tested-by: <syzbot+10005f4292fc9cc89de7@syzkaller.appspotmail.com>
Fixes: 58a317f1061c89 ("netfilter: ipv6: add IPv6 NAT support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: bridge: ebt_among: add missing match size checks

commit c4585a2823edf4d1326da44d1524ecbfda26bb37 upstream.

ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.

Therefore it must check that the size of the match structure
provided from userspace is sane by making sure em->match_size
is at least the minimum size of the expected structure.

The module has such a check, but its only done after accessing
a structure that might be out of bounds.

tested with: ebtables -A INPUT ... \
--among-dst fe:fe:fe:fe:fe:fe
--among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe
--among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe

Reported-by: <syzbot+fe0b19af568972814355@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsets

commit b71812168571fa55e44cdd0254471331b9c4c4c6 upstream.

We need to make sure the offsets are not out of range of the
total size.
Also check that they are in ascending order.

The WARN_ON triggered by syzkaller (it sets panic_on_warn) is
changed to also bail out, no point in continuing parsing.

Briefly tested with simple ruleset of
-A INPUT --limit 1/s' --log
plus jump to custom chains using 32bit ebtables binary.

Reported-by: <syzbot+845a53d13171abf8bf29@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: IDLETIMER: be syzkaller friendly

commit cfc2c740533368b96e2be5e0a4e8c3cace7d9814 upstream.

We had one report from syzkaller [1]

First issue is that INIT_WORK() should be done before mod_timer()
or we risk timer being fired too soon, even with a 1 second timer.

Second issue is that we need to reject too big info->timeout
to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or
risk looping, if result after overflow is 0.

[1]
WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x194/0x257 lib/dump_stack.c:53
 panic+0x1e4/0x41c kernel/panic.c:183
 __warn+0x1dc/0x200 kernel/panic.c:547
 report_bug+0x211/0x2d0 lib/bug.c:184
 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
 fixup_bug arch/x86/kernel/traps.c:247 [inline]
 do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
 invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988
RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
RSP: 0018:ffff8801db507538 EFLAGS: 00010006
RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404
RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082
RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c
R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6
R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000
 queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488
 queue_work include/linux/workqueue.h:488 [inline]
 schedule_work include/linux/workqueue.h:546 [inline]
 idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116
 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:541 [inline]
 smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829
 </IRQ>
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184
RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12
RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006
RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282
RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8
R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278
 __debug_object_init+0x235/0x1040 lib/debugobjects.c:378
 debug_object_init+0x17/0x20 lib/debugobjects.c:391
 __init_work+0x2b/0x60 kernel/workqueue.c:506
 idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline]
 idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213
 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850
 check_target net/ipv6/netfilter/ip6_tables.c:533 [inline]
 find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575
 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744
 do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline]
 do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686
 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
 nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
 ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927
 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976
 SYSC_setsockopt net/socket.c:1850 [inline]
 SyS_setsockopt+0x189/0x360 net/socket.c:1829
 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287

Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nat: cope with negative port range

commit db57ccf0f2f4624b4c4758379f8165277504fbd7 upstream.

syzbot reported a division by 0 bug in the netfilter nat code:

divide error: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 4168 Comm: syzkaller034710 Not tainted 4.16.0-rc1+ #309
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:nf_nat_l4proto_unique_tuple+0x291/0x530
net/netfilter/nf_nat_proto_common.c:88
RSP: 0018:ffff8801b2466778 EFLAGS: 00010246
RAX: 000000000000f153 RBX: ffff8801b2466dd8 RCX: ffff8801b2466c7c
RDX: 0000000000000000 RSI: ffff8801b2466c58 RDI: ffff8801db5293ac
RBP: ffff8801b24667d8 R08: ffff8801b8ba6dc0 R09: ffffffff88af5900
R10: ffff8801b24666f0 R11: 0000000000000000 R12: 000000002990f153
R13: 0000000000000001 R14: 0000000000000000 R15: ffff8801b2466c7c
FS:  00000000017e3880(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000208fdfe4 CR3: 00000001b5340002 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  dccp_unique_tuple+0x40/0x50 net/netfilter/nf_nat_proto_dccp.c:30
  get_unique_tuple+0xc28/0x1c10 net/netfilter/nf_nat_core.c:362
  nf_nat_setup_info+0x1c2/0xe00 net/netfilter/nf_nat_core.c:406
  nf_nat_redirect_ipv6+0x306/0x730 net/netfilter/nf_nat_redirect.c:124
  redirect_tg6+0x7f/0xb0 net/netfilter/xt_REDIRECT.c:34
  ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365
  ip6table_nat_do_chain+0x65/0x80 net/ipv6/netfilter/ip6table_nat.c:41
  nf_nat_ipv6_fn+0x594/0xa80 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:302
  nf_nat_ipv6_local_fn+0x33/0x5d0
net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:407
  ip6table_nat_local_fn+0x2c/0x40 net/ipv6/netfilter/ip6table_nat.c:69
  nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
  nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
  nf_hook include/linux/netfilter.h:243 [inline]
  NF_HOOK include/linux/netfilter.h:286 [inline]
  ip6_xmit+0x10ec/0x2260 net/ipv6/ip6_output.c:277
  inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139
  dccp_transmit_skb+0x9ac/0x10f0 net/dccp/output.c:142
  dccp_connect+0x369/0x670 net/dccp/output.c:564
  dccp_v6_connect+0xe17/0x1bf0 net/dccp/ipv6.c:946
  __inet_stream_connect+0x2d4/0xf00 net/ipv4/af_inet.c:620
  inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:684
  SYSC_connect+0x213/0x4a0 net/socket.c:1639
  SyS_connect+0x24/0x30 net/socket.c:1620
  do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x441c69
RSP: 002b:00007ffe50cc0be8 EFLAGS: 00000217 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 0000000000441c69
RDX: 000000000000001c RSI: 00000000208fdfe4 RDI: 0000000000000003
RBP: 00000000006cc018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000538 R11: 0000000000000217 R12: 0000000000403590
R13: 0000000000403620 R14: 0000000000000000 R15: 0000000000000000
Code: 48 89 f0 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 46 02 00 00 48 8b
45 c8 44 0f b7 20 e8 88 97 04 fd 31 d2 41 0f b7 c4 4c 89 f9 <41> f7 f6 48
c1 e9 03 48 b8 00 00 00 00 00 fc ff df 0f b6 0c 01
RIP: nf_nat_l4proto_unique_tuple+0x291/0x530
net/netfilter/nf_nat_proto_common.c:88 RSP: ffff8801b2466778

The problem is that currently we don't have any check on the
configured port range. A port range == -1 triggers the bug, while
other negative values may require a very long time to complete the
following loop.

This commit addresses the issue swapping the two ends on negative
ranges. The check is performed in nf_nat_l4proto_unique_tuple() since
the nft nat loads the port values from nft registers at runtime.

v1 -> v2: use the correct 'Fixes' tag
v2 -> v3: update commit message, drop unneeded READ_ONCE()

Fixes: 5b1158e909ec ("[NETFILTER]: Add NAT support for nf_conntrack")
Reported-by: syzbot+8012e198bd037f4871e5@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: x_tables: fix missing timer initialization in xt_LED

commit 10414014bc085aac9f787a5890b33b5605fbcfc4 upstream.

syzbot reported that xt_LED may try to use the ledinternal->timer
without previously initializing it:

------------[ cut here ]------------
kernel BUG at kernel/time/timer.c:958!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 1826 Comm: kworker/1:2 Not tainted 4.15.0+ #306
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:__mod_timer kernel/time/timer.c:958 [inline]
RIP: 0010:mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102
RSP: 0018:ffff8801d24fe9f8 EFLAGS: 00010293
RAX: ffff8801d25246c0 RBX: ffff8801aec6cb50 RCX: ffffffff816052c6
RDX: 0000000000000000 RSI: 00000000fffbd14b RDI: ffff8801aec6cb68
RBP: ffff8801d24fec98 R08: 0000000000000000 R09: 1ffff1003a49fd6c
R10: ffff8801d24feb28 R11: 0000000000000005 R12: dffffc0000000000
R13: ffff8801d24fec70 R14: 00000000fffbd14b R15: ffff8801af608f90
FS:  0000000000000000(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000206d6fd0 CR3: 0000000006a22001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  led_tg+0x1db/0x2e0 net/netfilter/xt_LED.c:75
  ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365
  ip6table_raw_hook+0x65/0x80 net/ipv6/netfilter/ip6table_raw.c:42
  nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
  nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
  nf_hook.constprop.27+0x3f6/0x830 include/linux/netfilter.h:243
  NF_HOOK include/linux/netfilter.h:286 [inline]
  ndisc_send_skb+0xa51/0x1370 net/ipv6/ndisc.c:491
  ndisc_send_ns+0x38a/0x870 net/ipv6/ndisc.c:633
  addrconf_dad_work+0xb9e/0x1320 net/ipv6/addrconf.c:4008
  process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113
  worker_thread+0x223/0x1990 kernel/workqueue.c:2247
  kthread+0x33c/0x400 kernel/kthread.c:238
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429
Code: 85 2a 0b 00 00 4d 8b 3c 24 4d 85 ff 75 9f 4c 8b bd 60 fd ff ff e8 bb
57 10 00 65 ff 0d 94 9a a1 7e e9 d9 fc ff ff e8 aa 57 10 00 <0f> 0b e8 a3
57 10 00 e9 14 fb ff ff e8 99 57 10 00 4c 89 bd 70
RIP: __mod_timer kernel/time/timer.c:958 [inline] RSP: ffff8801d24fe9f8
RIP: mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: ffff8801d24fe9f8
---[ end trace f661ab06f5dd8b3d ]---

The ledinternal struct can be shared between several different
xt_LED targets, but the related timer is currently initialized only
if the first target requires it. Fix it by unconditionally
initializing the timer struct.

v1 -> v2: call del_timer_sync() unconditionally, too.

Fixes: 268cb38e1802 ("netfilter: x_tables: add LED trigger target")
Reported-by: syzbot+10c98dc5725c6c8fc7fb@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: add back stackpointer size checks

commit 57ebd808a97d7c5b1e1afb937c2db22beba3c1f8 upstream.

The rationale for removing the check is only correct for rulesets
generated by ip(6)tables.

In iptables, a jump can only occur to a user-defined chain, i.e.
because we size the stack based on number of user-defined chains we
cannot exceed stack size.

However, the underlying binary format has no such restriction,
and the validation step only ensures that the jump target is a
valid rule start point.

IOW, its possible to build a rule blob that has no user-defined
chains but does contain a jump.

If this happens, no jump stack gets allocated and crash occurs
because no jumpstack was allocated.

Fixes: 7814b6ec6d0d6 ("netfilter: xtables: don't save/restore jumpstack offset")
Reported-by: syzbot+e783f671527912cd9403@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tc358743: fix register i2c_rd/wr function fix

commit f2c61f98e0b5f8b53b8fb860e5dcdd661bde7d0b upstream.

The below mentioned fix contains a small but severe bug,
fix it to make the driver work again.

Fixes: 3538aa6ecfb2 ("[media] tc358743: fix register i2c_rd/wr functions")

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: tca8418_keypad - remove double read of key event register

commit 9dd46c02532a6bed6240101ecf4bbc407f8c6adf upstream.

There is no need to tread the same register twice in a row.

Fixes: ea4348c8462a ("Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-un ...")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds

commit 863204cfdae98626a92535ac928ad79f4d6b74ff upstream.

In configurations without CONFIG_OMAP3 but with secure RAM support,
we now run into a link failure:

arch/arm/mach-omap2/omap-secure.o: In function `omap3_save_secure_ram':
omap-secure.c:(.text+0x130): undefined reference to `save_secure_ram_context'

The omap3_save_secure_ram() function is only called from the OMAP34xx
power management code, so we can simply hide that function in the
appropriate #ifdef.

Fixes: d09220a887f7 ("ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context")
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: hpwdt: Remove legacy NMI sourcing.

commit 2b3d89b402b085b08498e896c65267a145bed486 upstream.

Gen8 and prior Proliant systems supported the "CRU" interface
to firmware.  This interfaces allows linux to "call back" into firmware
to source the cause of an NMI.  This feature isn't fully utilized
as the actual source of the NMI isn't printed, the driver only
indicates that the source couldn't be determined when the call
fails.

With the advent of Gen9, iCRU replaces the CRU. The call back
feature is no longer available in firmware.  To be compatible and
not attempt to call back into firmware on system not supporting CRU,
the SMBIOS table is consulted to determine if it is safe to
make the call back or not.

This results in about half of the driver code being devoted
to either making CRU calls or determing if it is safe to make
CRU calls.  As noted, the driver isn't really using the results of
the CRU calls.

Furthermore, as a consequence of the Spectre security issue, the
BIOS/EFI calls are being wrapped into Spectre-disabling section.
Removing the call back in hpwdt_pretimeout assists in this effort.

As the CRU sourcing of the NMI isn't required for handling the
NMI and there are security concerns with making the call back, remove
the legacy (pre Gen9) NMI sourcing and the DMI code to determine if
the system had the CRU interface.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: hpwdt: fix unused variable warning

commit aeebc6ba88ba3758ad95467ff6191fabf2074c13 upstream.

The new hpwdt_my_nmi() function is used conditionally, which produces
a harmless warning in some configurations:

drivers/watchdog/hpwdt.c:478:12: error: 'hpwdt_my_nmi' defined but not used [-Werror=unused-function]

This moves it inside of the #ifdef that protects its caller, to silence
the warning.

Fixes: 621174a92851 ("watchdog: hpwdt: Check source of NMI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: hpwdt: Check source of NMI

commit 838534e50e2e5c1e644e30ab6cb28da88eb31368 upstream.

Do not claim the NMI (i.e. return NMI_DONE) if the source of
the NMI isn't the iLO watchdog or debug.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: hpwdt: SMBIOS check

commit c42cbe41727a138905a28f8e0b00c147be77ee93 upstream.

This corrects:
commit cce78da76601 ("watchdog: hpwdt: Add check for UEFI bits")

The test on HPE SMBIOS extension type 219 record "Misc Features"
bits for UEFI support is incorrect.  The definition of the Misc Features
bits in the HPE SMBIOS OEM Extensions specification (and related
firmware) was changed to use a different pair of bits to
represent UEFI supported.  Howerver, a corresponding change
to Linux was missed.

Current code/platform work because the iCRU test is working.
But purpose of cce78da766 is to ensure correct functionality
on future systems where iCRU isn't supported.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/paravirt, objtool: Annotate indirect calls

commit 3010a0663fd949d122eca0561b06b0a9453f7866 upstream.

Paravirt emits indirect calls which get flagged by objtool retpoline
checks, annotate it away because all these indirect calls will be
patched out before we start userspace.

This patching happens through alternative_instructions() ->
apply_paravirt() -> pv_init_ops.patch() which will eventually end up
in paravirt_patch_default(). This function _will_ write direct
alternatives.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP

commit d72f4e29e6d84b7ec02ae93088aa459ac70e733b upstream.

firmware_restrict_branch_speculation_*() recently started using
preempt_enable()/disable(), but those are relatively high level
primitives and cause build failures on some 32-bit builds.

Since we want to keep <asm/nospec-branch.h> low level, convert
them to macros to avoid header hell...

Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: arjan.van.de.ven@intel.com
Cc: bp@alien8.de
Cc: dave.hansen@intel.com
Cc: jmattson@google.com
Cc: karahmed@amazon.de
Cc: kvm@vger.kernel.org
Cc: pbonzini@redhat.com
Cc: rkrcmar@redhat.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot, objtool: Annotate indirect jump in secondary_startup_64()

commit bd89004f6305cbf7352238f61da093207ee518d6 upstream.

The objtool retpoline validation found this indirect jump. Seeing how
it's on CPU bringup before we run userspace it should be safe, annotate
it.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>