profile/ivi/kernel-adaptation-intel-automotive.git
12 years agoRevert "ramster: switch over to zsmalloc and crypto interface"
Greg Kroah-Hartman [Wed, 16 May 2012 15:09:35 +0000 (08:09 -0700)]
Revert "ramster: switch over to zsmalloc and crypto interface"

This reverts commit 49b81a3c7415d9b02169f37b8559d468fd17686a.

It causes build breakage under some configurations.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoramoops: Move to fs/pstore/ram.c
Anton Vorontsov [Wed, 16 May 2012 12:43:08 +0000 (05:43 -0700)]
ramoops: Move to fs/pstore/ram.c

Since ramoops was converted to pstore, it has nothing to do with character
devices nowadays. Instead, today it is just a RAM backend for pstore.

The patch just moves things around. There are a few changes were needed
because of the move:

1. Kconfig and Makefiles fixups, of course.

2. In pstore/ram.c we have to play a bit with MODULE_PARAM_PREFIX, this
   is needed to keep user experience the same as with ramoops driver
   (i.e. so that ramoops.foo kernel command line arguments would still
   work).

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Marco Stornelli <marco.stornelli@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoramoops: fix printk format warnings
Randy Dunlap [Thu, 3 May 2012 05:45:03 +0000 (15:45 +1000)]
ramoops: fix printk format warnings

Fix printk format warnings for phys_addr_t type variables:

drivers/char/ramoops.c:246:3: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'phys_addr_t'
drivers/char/ramoops.c:273:2: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'phys_addr_t'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoramoops: use pstore interface
Kees Cook [Thu, 3 May 2012 05:45:02 +0000 (15:45 +1000)]
ramoops: use pstore interface

Instead of using /dev/mem directly and forcing userspace to know (or
extract) where the platform has defined persistent memory, how many slots
it has, the sizes, etc, use the common pstore infrastructure to handle
Oops gathering and extraction.  This presents a much easier to use
filesystem-based view to the memory region.  This also means that any
other tools that are written to understand pstore will automatically be
able to process ramoops too.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Prepare for modular builds
Anton Vorontsov [Wed, 16 May 2012 12:43:19 +0000 (05:43 -0700)]
staging: android: persistent_ram: Prepare for modular builds

This is a transition patch to keep things bisectable, just moves
some routines under '#ifndef MODULE'. The code inside the #ifndef
will go away soon, but so far we must support pstore and ram_console.

So, we are about to use persistent_ram with pstore, with the ability
to compile persistent_ram routines as modules. Some parts of
persistent_ram uses memblock_reserve() routine, which is should be
only used built-in code, and thus it is not exported.

These persistent_ram bits are only used by Android's ram_console,
which is always built-in.

Without this patch, we won't able to compile persistent_ram as a
module:

ERROR: "memblock_reserve" [fs/pstore/ramoops.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

(As alternative, we could export memblock_reserve, but the thing
is: we won't need it later.)

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Remove never used struct persistent_ram_zone members
Anton Vorontsov [Wed, 16 May 2012 12:42:57 +0000 (05:42 -0700)]
staging: android: persistent_ram: Remove never used struct persistent_ram_zone members

Remove 'old_log_footer_size' and 'early' members of struct
persistent_ram_zone, as these were never used at all.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: rtl8712: Fix typo in rtl871x_io.h
Masanari Iida [Tue, 15 May 2012 18:34:19 +0000 (03:34 +0900)]
staging: rtl8712: Fix typo in rtl871x_io.h

Correct spelling typo "padater" to "padapter" in rtl871x_io.h

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor adv_pci1710 driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 20:12:53 +0000 (13:12 -0700)]
staging: comedi: refactor adv_pci1710 driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written and
removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor adv_pci1_dio driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 20:23:58 +0000 (13:23 -0700)]
staging: comedi: refactor adv_pci1_dio driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written and
removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor adl_pci9118 driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 20:42:04 +0000 (13:42 -0700)]
staging: comedi: refactor adl_pci9118 driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

While moving the struct boardtype, convert it to C99 initializers
to improve code readability. This results is a slight increase in
the total lines of code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor amplc_pci224 driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 20:50:01 +0000 (13:50 -0700)]
staging: comedi: refactor amplc_pci224 driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor amplc_pci230 driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 21:08:11 +0000 (14:08 -0700)]
staging: comedi: refactor amplc_pci230 driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor cb_pcidas64 driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 21:32:21 +0000 (14:32 -0700)]
staging: comedi: refactor cb_pcidas64 driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor cb_pcidas driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 21:48:04 +0000 (14:48 -0700)]
staging: comedi: refactor cb_pcidas driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor cb_pcidda driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 21:53:29 +0000 (14:53 -0700)]
staging: comedi: refactor cb_pcidda driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor cb_pcidio driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 21:59:47 +0000 (14:59 -0700)]
staging: comedi: refactor cb_pcidio driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor cb_pcimdas driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 22:04:40 +0000 (15:04 -0700)]
staging: comedi: refactor cb_pcimdas driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor cb_pcimdda driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 22:10:25 +0000 (15:10 -0700)]
staging: comedi: refactor cb_pcimdda driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor comedi_bond driver and use module_comedi_driver
H Hartley Sweeten [Tue, 15 May 2012 22:20:02 +0000 (15:20 -0700)]
staging: comedi: refactor comedi_bond driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor comedi_parport driver and use module_comedi_driver
H Hartley Sweeten [Tue, 15 May 2012 22:23:52 +0000 (15:23 -0700)]
staging: comedi: refactor comedi_parport driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor comedi_test driver and use module_comedi_driver
H Hartley Sweeten [Tue, 15 May 2012 22:30:51 +0000 (15:30 -0700)]
staging: comedi: refactor comedi_test driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor das16m1 driver and use module_comedi_driver
H Hartley Sweeten [Tue, 15 May 2012 23:02:34 +0000 (16:02 -0700)]
staging: comedi: refactor das16m1 driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Refactor some of the other functions to remove the remaining
forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor das6402 driver and use module_comedi_driver
H Hartley Sweeten [Tue, 15 May 2012 23:08:04 +0000 (16:08 -0700)]
staging: comedi: refactor das6402 driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor dt2801 driver and use module_comedi_driver
H Hartley Sweeten [Tue, 15 May 2012 23:28:27 +0000 (16:28 -0700)]
staging: comedi: refactor dt2801 driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Refactor some of the other functions to remove the remaining
forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor dt2811 driver and use module_comedi_driver
H Hartley Sweeten [Tue, 15 May 2012 23:35:38 +0000 (16:35 -0700)]
staging: comedi: refactor dt2811 driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Refactor some of the other functions to remove the remaining
forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor gsc_hpdi driver and use module_comedi_pci_driver
H Hartley Sweeten [Tue, 15 May 2012 23:44:14 +0000 (16:44 -0700)]
staging: comedi: refactor gsc_hpdi driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor ii_pci20kc driver and use module_comedi_driver
H Hartley Sweeten [Tue, 15 May 2012 23:55:37 +0000 (16:55 -0700)]
staging: comedi: refactor ii_pci20kc driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor ni_pcidio driver and use module_comedi_driver
H Hartley Sweeten [Wed, 16 May 2012 00:09:09 +0000 (17:09 -0700)]
staging: comedi: refactor ni_pcidio driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor ni_at_a2150 driver and use module_comedi_driver
H Hartley Sweeten [Wed, 16 May 2012 00:17:14 +0000 (17:17 -0700)]
staging: comedi: refactor ni_at_a2150 driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor ni_at_ao driver and use module_comedi_driver
H Hartley Sweeten [Wed, 16 May 2012 00:22:02 +0000 (17:22 -0700)]
staging: comedi: refactor ni_at_ao driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor ni_atmio16d driver and use module_comedi_driver
H Hartley Sweeten [Wed, 16 May 2012 00:28:53 +0000 (17:28 -0700)]
staging: comedi: refactor ni_atmio16d driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor ni_atmio driver and use module_comedi_driver
H Hartley Sweeten [Wed, 16 May 2012 00:36:01 +0000 (17:36 -0700)]
staging: comedi: refactor ni_atmio driver and use module_comedi_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive to the end of the source. This is more
typical of how other drivers are written and removes the need
for the forward declarations.

Convert the driver to use the module_comedi_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor unioxx5 driver to remove forward declarations
H Hartley Sweeten [Tue, 15 May 2012 18:28:43 +0000 (11:28 -0700)]
staging: comedi: refactor unioxx5 driver to remove forward declarations

Refactor of the unioxx5 comedi driver to remove all the forward
declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: gdm72xx: Add GCT GDM72xx WiMAX driver.
Sage Ahn [Tue, 15 May 2012 04:20:36 +0000 (13:20 +0900)]
staging: gdm72xx: Add GCT GDM72xx WiMAX driver.

This patch provides the kernel driver for the GDM72xx WiMAX chips
developed by GCT Semiconductor, Inc., which enables mobile WiMAX
connection on the Linux host.

Signed-off-by: Sage Ahn <syahn@gctsemi.com>
Cc: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agomei: Documentation: add generated example binary into .gitignore file
Tomas Winkler [Mon, 14 May 2012 20:52:09 +0000 (23:52 +0300)]
mei: Documentation: add generated example binary into .gitignore file

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: wlags49_h2: potential NULL dereference
Dan Carpenter [Mon, 14 May 2012 20:56:46 +0000 (23:56 +0300)]
Staging: wlags49_h2: potential NULL dereference

wl_device_dealloc() dereferences the "dev" paramter, so let's move it
under the check for NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: refactor ni_pcimio driver and use module_comedi_pci_driver
H Hartley Sweeten [Fri, 11 May 2012 23:51:56 +0000 (16:51 -0700)]
staging: comedi: refactor ni_pcimio driver and use module_comedi_pci_driver

Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written and
removes the need for the forward declarations.

Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: Use module_comedi_pci_driver and standardize drivers
H Hartley Sweeten [Fri, 11 May 2012 23:16:20 +0000 (16:16 -0700)]
staging: comedi: Use module_comedi_pci_driver and standardize drivers

Convert the refactored comedi pci drivers to use the
module_comedi_pci_driver() macro which makes the code
smaller and a bit simpler.

In the process, rename some of the symbols in the driver
to standardize the comedi pci drivers.

Based on the driver {name}:
1) Rename the comedi_driver to {name}_driver.
2) Use a static string {name} for the comedi_driver.driver_name.
3) Rename the pci probe/remove functions to {name)_pci_probe/remove.
4) Rename the pci id_table to {name}_pci_table.
5) Add the static string {name} for the pci_driver.name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: Add helper macro for comedi pci driver boilerplate
H Hartley Sweeten [Fri, 11 May 2012 23:15:39 +0000 (16:15 -0700)]
staging: comedi: Add helper macro for comedi pci driver boilerplate

Introduce the module_comedi_pci_driver macro, and the
associated register/unregister functions, which is a
convenience macro for comedi pci driver modules similar
to module_platform_driver. It is intended to be used by
drivers where the init/exit section does nothing but
register/unregister the comedi driver and associated pci
driver. By using this macro it is possible to eliminate
a few lines of boilerplate code per comedi pci driver.

Add a check to make sure that the pci_driver->name is
set. Once all the comedi pci drivers have been fixed this
will be removed.

Also, when registering the pci driver check for failure
and unregister the comedi driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack: fix a few sparse warnings
Samuel Iglesias Gonsalvez [Mon, 14 May 2012 10:41:25 +0000 (12:41 +0200)]
Staging: ipack: fix a few sparse warnings

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack: added more info in Kconfig's help about ipack
Samuel Iglesias Gonsalvez [Fri, 11 May 2012 08:17:16 +0000 (10:17 +0200)]
Staging: ipack: added more info in Kconfig's help about ipack

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack/devices/ipoctal: change the licence to explicitly GPLv2
Samuel Iglesias Gonsalvez [Fri, 11 May 2012 08:17:15 +0000 (10:17 +0200)]
Staging: ipack/devices/ipoctal: change the licence to explicitly GPLv2

Change the licence to explicitly GPLv2 to avoid possible conflicts in the
future.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack/bridges/tpci200: change the licence to explicitly GPLv2
Samuel Iglesias Gonsalvez [Fri, 11 May 2012 08:17:14 +0000 (10:17 +0200)]
Staging: ipack/bridges/tpci200: change the licence to explicitly GPLv2

Change the licence to explicitly GPLv2 to avoid possible conflicts in the
future.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack: change the licence to explicitly GPLv2
Samuel Iglesias Gonsalvez [Fri, 11 May 2012 08:17:13 +0000 (10:17 +0200)]
Staging: ipack: change the licence to explicitly GPLv2

Change the licence to explicitly GPLv2 to avoid possible conflicts in the
future.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack: add contact email in TODO file
Samuel Iglesias Gonsalvez [Fri, 11 May 2012 08:17:12 +0000 (10:17 +0200)]
Staging: ipack: add contact email in TODO file

Added myself in the TODO file.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: ipack: move the devices source line in Kconfig file
Samuel Iglesias Gonsalvez [Fri, 11 May 2012 08:17:11 +0000 (10:17 +0200)]
Staging: ipack: move the devices source line in Kconfig file

Maintain the proper order of definitions in Kconfig following the time order of
the commits.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoStaging: move the position of the ipack source line in Kconfig
Samuel Iglesias Gonsalvez [Fri, 11 May 2012 08:17:10 +0000 (10:17 +0200)]
Staging: move the position of the ipack source line in Kconfig

Moved the ipack source line to the proper place, at the end of the list in the
staging's Kconfig file.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:meter: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:54 +0000 (15:39 +0200)]
staging:iio:meter: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:resolver: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:53 +0000 (15:39 +0200)]
staging:iio:resolver: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:magnetometer: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:52 +0000 (15:39 +0200)]
staging:iio:magnetometer: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:light: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:51 +0000 (15:39 +0200)]
staging:iio:light: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:imu: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:50 +0000 (15:39 +0200)]
staging:iio:imu: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:impedance-analyzer: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:49 +0000 (15:39 +0200)]
staging:iio:impedance-analyzer: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:gyro: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:48 +0000 (15:39 +0200)]
staging:iio:gyro: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:frequency: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:47 +0000 (15:39 +0200)]
staging:iio:frequency: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:dac: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:46 +0000 (15:39 +0200)]
staging:iio:dac: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:cdc: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:45 +0000 (15:39 +0200)]
staging:iio:cdc: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:addac: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:44 +0000 (15:39 +0200)]
staging:iio:addac: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:accel: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:43 +0000 (15:39 +0200)]
staging:iio:accel: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:adc: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:42 +0000 (15:39 +0200)]
staging:iio:adc: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:adis16400_ring: Pass IIO device directly
Lars-Peter Clausen [Sat, 12 May 2012 13:39:41 +0000 (15:39 +0200)]
staging:iio:adis16400_ring: Pass IIO device directly

When calling adis16350_spi_read_all and adis16400_spi_read_burst we pass the
device struct of embedded in the IIO device only to look up the IIO device from
the device struct again right away. This patch changes the code to pass the IIO
device directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:ade7758_spi_read_burst: Pass IIO device directly
Lars-Peter Clausen [Sat, 12 May 2012 13:39:40 +0000 (15:39 +0200)]
staging:iio:ade7758_spi_read_burst: Pass IIO device directly

When calling ade7758_spi_read_burst we pass the device struct of embedded in the
IIO device only to look up the IIO device from the device struct again right
away. This patch changes the code to pass the IIO device directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:adis16260_read_ring_data: Pass IIO device directly
Lars-Peter Clausen [Sat, 12 May 2012 13:39:39 +0000 (15:39 +0200)]
staging:iio:adis16260_read_ring_data: Pass IIO device directly

When calling adis16260_read_ring_data we pass the device struct of embedded in
the IIO device only to look up the IIO device from the device struct again right
away. This patch changes the code to pass the IIO device directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:__lis3l02dq_write_data_ready_config: Pass IIO device directly
Lars-Peter Clausen [Sat, 12 May 2012 13:39:38 +0000 (15:39 +0200)]
staging:iio:__lis3l02dq_write_data_ready_config: Pass IIO device directly

When calling __lis3l02dq_write_data_ready_config we pass the device struct of
embedded in the IIO device only to look up the IIO device from the device struct
again right away. This patch changes the code to pass the IIO device directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:adis16240_read_ring_data: Pass IIO device directly
Lars-Peter Clausen [Sat, 12 May 2012 13:39:37 +0000 (15:39 +0200)]
staging:iio:adis16240_read_ring_data: Pass IIO device directly

When calling adis16240_read_ring_data we pass the device struct of embedded in
the IIO device only to look up the IIO device from the device struct again right
away. This patch changes the code to pass the IIO device directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:adis16209_read_ring_data: Pass IIO device directly
Lars-Peter Clausen [Sat, 12 May 2012 13:39:36 +0000 (15:39 +0200)]
staging:iio:adis16209_read_ring_data: Pass IIO device directly

When calling adis16209_read_ring_data we pass the device struct of embedded in
the IIO device only to look up the IIO device from the device struct again right
away. This patch changes the code to pass the IIO device directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:adis16204_read_ring_data: Pass IIO device directly
Lars-Peter Clausen [Sat, 12 May 2012 13:39:35 +0000 (15:39 +0200)]
staging:iio:adis16204_read_ring_data: Pass IIO device directly

When calling adis16204_read_ring_data we pass the device struct of embedded in
the IIO device only to look up the IIO device from the device struct again right
away. This patch changes the code to pass the IIO device directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:adis16203_read_ring_data: Pass IIO device directly
Lars-Peter Clausen [Sat, 12 May 2012 13:39:34 +0000 (15:39 +0200)]
staging:iio:adis16203_read_ring_data: Pass IIO device directly

When calling adis16203_read_ring_data we pass the device struct of embedded in
the IIO device only to look up the IIO device from the device struct again right
away. This patch changes the code to pass the IIO device directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoiio: Use dev_to_iio_dev()
Lars-Peter Clausen [Sat, 12 May 2012 13:39:33 +0000 (15:39 +0200)]
iio: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoiio: Add dev_to_iio_dev() helper function
Lars-Peter Clausen [Sat, 12 May 2012 13:39:32 +0000 (15:39 +0200)]
iio: Add dev_to_iio_dev() helper function

This patch adds a helper function for retriving a iio_dev struct from a device
struct. Currently we open-code this in two different ways. One is using
dev_get_drvdata on the device and the other is using container_of. The new
helper function uses the container_of solution as it creates slightly smaller
code and also will eventually free up the drvdata pointer for usage by invidual
drivers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: "rts5139" Fix typos.
Justin P. Mattock [Mon, 14 May 2012 14:25:35 +0000 (07:25 -0700)]
staging: "rts5139" Fix typos.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: r8712u: Remove needless test for NULL
Larry Finger [Fri, 11 May 2012 16:33:43 +0000 (11:33 -0500)]
staging: r8712u: Remove needless test for NULL

In commit ee6aeff, a swatch warning was fixed by moving some code inside
an if block that is executed only when the pointer padapter is not NULL.
In fact, padapter can never be NULL and the corect fix should have been
the removal of the test of padapter.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging:iio:dummy: Remove outdated comment
Lars-Peter Clausen [Fri, 11 May 2012 13:12:29 +0000 (15:12 +0200)]
staging:iio:dummy: Remove outdated comment

iio_device_free has to be called regardless of whether the device has been
registered or not when freeing it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add ADC driver to the at91sam9g20 dtsi
Maxime Ripard [Fri, 11 May 2012 13:35:40 +0000 (15:35 +0200)]
ARM: AT91: Add ADC driver to the at91sam9g20 dtsi

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add ADC driver to the at91sam9x5 dtsi
Maxime Ripard [Fri, 11 May 2012 13:35:39 +0000 (15:35 +0200)]
ARM: AT91: Add ADC driver to the at91sam9x5 dtsi

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add ADC driver to the at91sam9g45 dtsi
Maxime Ripard [Fri, 11 May 2012 13:35:38 +0000 (15:35 +0200)]
ARM: AT91: Add ADC driver to the at91sam9g45 dtsi

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoIIO: AT91: Add DT support to at91_adc driver
Maxime Ripard [Fri, 11 May 2012 13:35:37 +0000 (15:35 +0200)]
IIO: AT91: Add DT support to at91_adc driver

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add the ADC clock to the sam9x5 SoC file
Maxime Ripard [Fri, 11 May 2012 13:35:36 +0000 (15:35 +0200)]
ARM: AT91: Add the ADC clock to the sam9x5 SoC file

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: ADC: Add support for the AT91SAM9M10G45-EK board
Maxime Ripard [Fri, 11 May 2012 13:35:35 +0000 (15:35 +0200)]
ARM: AT91: ADC: Add support for the AT91SAM9M10G45-EK board

This patch adds platform data for the AT91 ADC driver support for
the AT91SAM9M10G45-EK board.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add the ADC to the sam9g20ek board
Maxime Ripard [Fri, 11 May 2012 13:35:34 +0000 (15:35 +0200)]
ARM: AT91: Add the ADC to the sam9g20ek board

This patch adds platform data for the AT91 ADC driver support for
the AT91SAM9G20-EK board.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: IIO: Add AT91 ADC driver.
Maxime Ripard [Fri, 11 May 2012 13:35:33 +0000 (15:35 +0200)]
ARM: AT91: IIO: Add AT91 ADC driver.

Add the ADC driver for Atmel's AT91SAM9G20-EK, AT91SAM9M10G45-EK
and AT91SAM9X5 family boards.

It has support for both software and hardware triggers.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoARM: AT91: Add platform data for the AT91 ADCs
Maxime Ripard [Fri, 11 May 2012 13:35:32 +0000 (15:35 +0200)]
ARM: AT91: Add platform data for the AT91 ADCs

The AT91 SoCs often embeds an ADC. This patch adds the needed
platform data to specify the informations required by the driver
to work properly.

For now, we only need the reference voltage and which channels
are available on the board.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoiio: amplifiers: New driver for AD8366 Dual-Digital Variable Gain Amplifier
Michael Hennerich [Fri, 11 May 2012 09:36:54 +0000 (11:36 +0200)]
iio: amplifiers: New driver for AD8366 Dual-Digital Variable Gain Amplifier

Changes since V1:

Apply review feedback:
Introduce and use IIO_CHAN_INFO_HARDWAREGAIN
Introduce and use Use IIO_VAL_INT_PLUS_MICRO_DB

Modify out of staging include paths.
Convert to new iio core API naming.

Changes since V2:

more sanity checking in write_raw

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoiio: core: introduce IIO_CHAN_INFO_HARDWAREGAIN
Michael Hennerich [Fri, 11 May 2012 09:36:53 +0000 (11:36 +0200)]
iio: core: introduce IIO_CHAN_INFO_HARDWAREGAIN

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoiio: core: introduce dB scle: IIO_VAL_INT_PLUS_MICRO_DB
Michael Hennerich [Fri, 11 May 2012 09:36:52 +0000 (11:36 +0200)]
iio: core: introduce dB scle: IIO_VAL_INT_PLUS_MICRO_DB

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agoramster: switch over to zsmalloc and crypto interface
Dan Magenheimer [Thu, 10 May 2012 19:06:21 +0000 (12:06 -0700)]
ramster: switch over to zsmalloc and crypto interface

RAMster does many zcache-like things.  In order to avoid major
merge conflicts at 3.4, ramster used lzo1x directly for compression
and retained a local copy of xvmalloc, while zcache moved to the
new zsmalloc allocator and the crypto API.

This patch moves ramster forward to use zsmalloc and crypto.

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: line6/config.h: Remove CHECKPOINT macro
Johannes Thumshirn [Thu, 10 May 2012 17:12:02 +0000 (19:12 +0200)]
staging: line6/config.h: Remove CHECKPOINT macro

Kill unused debugging macro CHECKPOINT

Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: comedi: register sysfs device attributes with driver core
H Hartley Sweeten [Fri, 11 May 2012 01:05:28 +0000 (18:05 -0700)]
staging: comedi: register sysfs device attributes with driver core

Currently the sysfs device attributes are created by the comedi
core after each comedi device is created. This can lead to a race
condition where userspace gets an add event before the files are
created.

Register the device attributes with the comedi class so that the
driver core handles creating them and we avoid the race.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Introduce persistent_ram_free()
Anton Vorontsov [Sat, 12 May 2012 00:18:05 +0000 (17:18 -0700)]
staging: android: persistent_ram: Introduce persistent_ram_free()

A corresponding function to persistent_ram_new().

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Make it possible to use memory outside of bootmem
Anton Vorontsov [Sat, 12 May 2012 00:17:54 +0000 (17:17 -0700)]
staging: android: persistent_ram: Make it possible to use memory outside of bootmem

This includes devices' memory (e.g. framebuffers or memory mapped
EEPROMs on a local bus), as well as the normal RAM that we don't use
for the main memory.

For the normal (but unused) ram we could use kmaps, but this assumes
highmem support, so we don't bother and just use the memory via
ioremap.

As a side effect, the following hack is possible: when used together
with pstore_ram (new ramoops) module, we can limit the normal RAM region
with mem= and then point ramoops to use the rest of the memory, e.g.

mem=128M ramoops.mem_address=0x8000000

Sure, we could just reserve the region with memblock_reserve() early in
the arch/ code, and then register a pstore_ram platform device pointing
to the reserved region. It's still a viable option if platform wants
to do so.

Also, we might want to use IO accessors in case of a real device,
but for now we don't bother (the old ramoops wasn't using it either, so
at least we don't make things worse).

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Introduce persistent_ram_vmap()
Anton Vorontsov [Sat, 12 May 2012 00:17:43 +0000 (17:17 -0700)]
staging: android: persistent_ram: Introduce persistent_ram_vmap()

Factor out vmap logic out of persistent_ram_buffer_map(), this will
make the code a bit more understandable when we'll add support for
non-bootmem memory.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Introduce persistent_ram_new()
Anton Vorontsov [Sat, 12 May 2012 00:17:34 +0000 (17:17 -0700)]
staging: android: persistent_ram: Introduce persistent_ram_new()

The routine just creates a persistent ram zone at a specified address.

For persistent_ram_init_ringbuffer() we'd need to add a
'struct persistent_ram' to the global list, and associate it with a
device. We don't need all this complexity in pstore_ram, so we introduce
the simple function.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: persistent_ram: Introduce persistent_ram_post_init()
Anton Vorontsov [Sat, 12 May 2012 00:17:25 +0000 (17:17 -0700)]
staging: android: persistent_ram: Introduce persistent_ram_post_init()

Factor post init logic out of __persistent_ram_init(), we'll need
it for the new persistent_ram_new() routine.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agopersistent_ram: Fix buffer size clamping during writes
Anton Vorontsov [Sat, 12 May 2012 00:17:17 +0000 (17:17 -0700)]
persistent_ram: Fix buffer size clamping during writes

This is a longstanding bug, almost unnoticeable when calling
persistent_ram_write() for small buffers.

But when called for large data buffers, the write routine behaves
incorrectly, as the size may never update: instead of clamping
the size to the maximum buffer size, buffer_size_add_clamp() returns
an error (which is never checked by the write routine, btw).

To fix this, we now use buffer_size_add() that actually clamps the
size to the max value.

Also remove buffer_size_add_clamp(), it is no longer needed.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Colin Cross <ccross@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agopersistent_ram: Remove prz->node
Anton Vorontsov [Sat, 12 May 2012 00:17:06 +0000 (17:17 -0700)]
persistent_ram: Remove prz->node

The 'node' struct member is unused, so remove it.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: logger: Fix some sparse and whitespace issues
Tim Bird [Thu, 10 May 2012 21:22:59 +0000 (14:22 -0700)]
staging: android: logger: Fix some sparse and whitespace issues

Fix a few sparse warnings, and improve whitespace.

Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: android: logger: Allocate logs dynamically at boot (v3)
Tim Bird [Thu, 10 May 2012 22:11:36 +0000 (15:11 -0700)]
staging: android: logger: Allocate logs dynamically at boot (v3)

This changes the log initialization to be dynamic, but still
at boot time.  These changes are a predecessor to implementing
runtime allocation and freeing of logs, to make the Android logger
less hard-coded.

Change from a fixed set of static log structures, to allocation
at init time into a list.  Return proper error numbers on log
allocation failure.

Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
12 years agostaging: delete all duplicated endian crap from rtl8712 driver
Paul Gortmaker [Thu, 10 May 2012 03:10:54 +0000 (23:10 -0400)]
staging: delete all duplicated endian crap from rtl8712 driver

This driver had headers like big_endian.h, little_endian.h, swab.h
and yet we can throw them all in the trash can and the thing
still builds on x86-64 and ppc, just by deleting the references
to the deleted files.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12 years agostaging: wean rtl8712 off of its ancient duplicate of ip.h
Paul Gortmaker [Thu, 10 May 2012 02:53:32 +0000 (22:53 -0400)]
staging: wean rtl8712 off of its ancient duplicate of ip.h

This driver should not be carrying around ancient copies of
headers like <linux/ip.h> for its own use.  Mapping it onto
the mainline one uncovers no build issues.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
12 years agostaging: wean rtl8712 off of its ancient duplicate of if_ether.h
Paul Gortmaker [Thu, 10 May 2012 02:42:45 +0000 (22:42 -0400)]
staging: wean rtl8712 off of its ancient duplicate of if_ether.h

This driver should not be carrying around ancient copies of
headers like <linux/if_ether.h> for its own use.  Mapping it
onto the mainline one uncovers no build issues.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>