dt-bindings: Add compatible for BCM2711 DSI1

DSI1 on BCM2711 doesn't require the DMA workaround that is used
on BCM2835/6/7, therefore it needs a new compatible string.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-7-maxime@cerno.tech

drm/vc4: dsi: Add support for DSI0

DSI0 was partially supported, but didn't register with the main
driver, and the code was inconsistent as to whether it checked
port == 0 or port == 1.

Add compatible string and other support to make it consistent.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-6-maxime@cerno.tech

drm/vc4: dsi: Introduce a variant structure

Most of the differences between DSI0 and DSI1 are handled through the
ID. However, the BCM2711 DSI is going to introduce one more variable to
the mix and will break some expectations of the earlier, simpler, test.

Let's add a variant structure that will address most of the differences
between those three controllers.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-5-maxime@cerno.tech

drm/vc4: dsi: Use snprintf for the PHY clocks instead of an array

The DSI clocks setup function has been using an array to store the clock
name of either the DSI0 or DSI1 blocks, using the port ID to choose the
proper one.

Let's switch to an snprintf call to do the same thing and simplify the
array a bit.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-4-maxime@cerno.tech

drm/vc4: dsi: Correct DSI register definition

The DSI1_PHY_AFEC0_PD_DLANE1 and DSI1_PHY_AFEC0_PD_DLANE3 register
definitions were swapped, so trying to use more than a single data
lane failed as lane 1 would get powered down.
(In theory a 4 lane device would work as all lanes would remain
powered).

Correct the definitions.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-3-maxime@cerno.tech

drm/vc4: drv: Remove the DSI pointer in vc4_drv

That pointer isn't used anywhere, so there's no point in keeping it.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-2-maxime@cerno.tech

drm/vc4: hdmi: Don't poll for the infoframes status on setup

The infoframes are sent at a regular interval as a data island packet,
so we don't need to wait for them to be sent when we're setting them up.

However, we do need to poll when we're enabling since the we can't
update the packet RAM until it has been sent.

Let's add a boolean flag to tell whether we want to poll or not to
support both cases.

Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203074624.721559-1-maxime@cerno.tech

drm/panel: s6e63m0: Fix init sequence again

The DSI version of the panel behaved instable and close
scrutiny of the vendor driver from the Samsung
GT-S8190 shows a different initialization sequence for
the DSI mode panel than the DPI mode panel.

Make the initialization depend on whether we are in
DSI or DPI mode and handle the differences.

After this the panel on the GT-I8190 becomes much more
stable.

Also spell out some more custom DCS commands found in
the vendor source code to cut down a bit on magic
where we can.

Fixes: f0aee45ffc8b ("drm/panel: s6e63m0: Fix init sequence")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201205122229.1952980-1-linus.walleij@linaro.org

dt-bindings: display: mcde: Convert to YAML schema

This moves the MCDE bindings over to using the YAML schema
to describe the ST-Ericsson MCDE display controller,
making use of the generic DSI controller schema.

In the process we correct an error in the old text bindings:
the clocks for the SDI host controllers were specified as
part of the main MCDE component while they should be
specified in the DSI host controller subnodes. This was
a leftover from an earlier iteration of the first patch
series adding the MCDE.

We also add the "port" node, we will use this when adding
LCD panels using the direct parallel interface DPI instead
of DSI.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201115185145.566772-1-linus.walleij@linaro.org

video: fbdev: cirrusfb: Fix kernel-doc and set but not used warnings

Fix warnings:
- drop kernel-doc for the two debug functions to avoid the warnings
- delete unused code

v2:
  - Updated subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-28-sam@ravnborg.org

video: fbdev: uvesafb: Fix string related warnings

Two W=1 string related warnings.
- Using strncpy to copy string without null-termination generates a
  warning.  Use memcpy to copy only the relevant chars

- Fix a potential bug with a very long string, subtract one from the
  length to make room for the termination null.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Michal Januszewski <spock@gentoo.org>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-27-sam@ravnborg.org

video: fbdev: s3c-fb: Fix kernel-doc and set but not used warnings

Fix several W=1 warnings
- Updated kernel-doc as needed
- Deleted unused local variable, it was assigned but never used

v2:
  - Updated subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-25-sam@ravnborg.org

video: fbdev: omapfb: Fix set but not used warnings in dsi

Fix several W=1 warnings.
This removes unused code and avoids an assignment by moving
the use inside the conditional block.

The register read FLD_GET(r, 15, 8) could be dropped as it was done a
few lines before too.

v2:
  - Updated subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-23-sam@ravnborg.org

drm/kmb: fix array bounds warning

gcc warns about an out-of-bounds access when the using nonzero
values for 'plane_id' on kmb->plane_status:

drivers/gpu/drm/kmb/kmb_plane.c: In function 'kmb_plane_atomic_disable':
drivers/gpu/drm/kmb/kmb_plane.c:128:20: warning: array subscript 3 is above array bounds of 'struct layer_status[1]' [-Warray-bounds]
  128 |   kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL2_ENABLE;
      |   ~~~~~~~~~~~~~~~~~^~~~~~~~~~
drivers/gpu/drm/kmb/kmb_plane.c:125:20: warning: array subscript 2 is above array bounds of 'struct layer_status[1]' [-Warray-bounds]
  125 |   kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL1_ENABLE;
      |   ~~~~~~~~~~~~~~~~~^~~~~~~~~~
drivers/gpu/drm/kmb/kmb_plane.c:122:20: warning: array subscript 1 is above array bounds of 'struct layer_status[1]' [-Warray-bounds]
  122 |   kmb->plane_status[plane_id].ctrl = LCD_CTRL_VL2_ENABLE;

Having the array truncated to one entry seems intentional, so add
a range check before indexing it to make it clearer what is going
on and shut up the warning.

I received the warning from the kernel test robot after a private
patch that turns on Warray-bounds unconditionally.

Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201129200927.1854104-1-arnd@kernel.org

drm: panel: add flags to BOE NV110WTM-N61

I forgot to add these when posting up the support for BOE
NV110WTM-N61.  Add them now.

Fixes: a96ee0f6b58d ("drm: panel: simple: Add BOE NV110WTM-N61")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201125554.v2.1.I8a7bfc0966e803ab91001c9e6d01a736950c4981@changeid

drm: panel: Fully transition panel_desc kerneldoc to inline style

In commit 131f909ad55f ("drm: panel: simple: Fixup the struct
panel_desc kernel doc") I transitioned the more deeply nested
kerneldoc comments into the inline style.  Apparently it is desirable
to continue the job and move _everything_ in this struct to inline.
Let's do it.

While doing this, we also add a short summary for the whole struct to
fix a warning when we run with extra warnings, AKA:
  scripts/kernel-doc -v -rst drivers/gpu/drm/panel/panel-simple.c

The warning was:
  drivers/gpu/drm/panel/panel-simple.c:42: warning: missing initial short description on line:
   * struct panel_desc

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201201125822.1.I3c4191336014bd57364309439e56f600c94bb12b@changeid

drm: Remove drmm_add_final_kfree() declaration from public headers

The drmm_add_final_kfree() function is declared in the
include/drm/drm_managed.h public header, but has become an internal API
not exposed to drivers. Drop it from drm_managed.h as it's already
declared in drm_internal.h.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204092932.21636-1-laurent.pinchart+renesas@ideasonboard.com

drm/hisilicon: Delete the entire file hibmc_ttm.c

Delete the entire file hibmc_ttm.c. drmm_vram_helper_init() can be
called directly from hibmc_load(). hibmc_dumb_create() and
hibmc_mode_funcs can go to hibmc_drm_drv.c

v2:
change Deletted to Delete

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1607044999-47666-13-git-send-email-tiantao6@hisilicon.com

drm/hisilicon: Use managed VRAM-helper initialization

updated to use drmm_vram_helper_init()

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1606964953-24309-1-git-send-email-tiantao6@hisilicon.com

drm/ingenic: depend on COMMON_CLK to fix compile tests

The Ingenic DRM uses Common Clock Framework thus it cannot be built on
platforms without it (e.g. compile test on MIPS with RALINK and
SOC_RT305X):

    /usr/bin/mips-linux-gnu-ld: drivers/gpu/drm/ingenic/ingenic-drm-drv.o: in function `ingenic_drm_bind.isra.0':
    ingenic-drm-drv.c:(.text+0x1600): undefined reference to `clk_get_parent'
    /usr/bin/mips-linux-gnu-ld: ingenic-drm-drv.c:(.text+0x16b0): undefined reference to `clk_get_parent'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116175301.402787-2-krzk@kernel.org

drm/fb-helper: Add missed unlocks in setcmap_legacy()

setcmap_legacy() does not call drm_modeset_unlock_all() in some exits,
add the missed unlocks with goto to fix it.

Fixes: 964c60063bff ("drm/fb-helper: separate the fb_setcmap helper into atomic and legacy paths")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203144248.418281-1-hslester96@gmail.com

gma500: clean up error handling in init

The main problem with this error handling was that it didn't clean up if
i2c_add_numbered_adapter() failed.  This code is pretty old, and doesn't
match with today's checkpatch.pl standards so I took the opportunity to
tidy it up a bit.  I changed the NULL comparison, and removed the
WARNING message if kzalloc() fails and updated the label names.

Fixes: 1b082ccf5901 ("gma500: Add Oaktrail support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/X8ikkAqZfnDO2lu6@mwanda

drm/hisilicon: Use the new api devm_drm_irq_install

Use devm_drm_irq_install to register interrupts so that
drm_irq_uninstall is not called when hibmc is removed.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1606901212-8214-4-git-send-email-tiantao6@hisilicon.com

drm/irq: Add the new api to install irq

Add new api devm_drm_irq_install() to register interrupts,
no need to call drm_irq_uninstall() when the drm module is removed.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1606901212-8214-3-git-send-email-tiantao6@hisilicon.com

drm/hisilicon: Code refactoring for hibmc_drm_drv

Use the devm_drm_dev_alloc provided by the drm framework to alloc
a structure hibmc_drm_private.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1606901212-8214-2-git-send-email-tiantao6@hisilicon.com

drm: document that user-space should force-probe connectors

It seems like we can't have nice things, so let's just document the
disappointing behaviour instead.

The previous version assumed the kernel would perform the probing work
when appropriate, however this is not the case today. Update the
documentation to reflect reality.

v2:

- Improve commit message to explain why this change is made (Pekka)
- Keep the bit about flickering (Daniel)
- Explain when user-space should force-probe, and when it shouldn't (Daniel)

Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 2ac5ef3b2362 ("drm: document drm_mode_get_connector")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/AxqLnTAsFCRishOVB5CLsqIesmrMrm7oytnOVB7oPA@cp7-web-043.plabs.ch

drm/virtio: consider dma-fence context when signaling

This an incremental refactor towards multiple dma-fence contexts
in virtio-gpu.  Since all fences are still allocated using
&virtio_gpu_fence_driver.context, nothing should break and every
processed fence will be signaled.

The overall idea is every 3D context can allocate a number of
dma-fence contexts.  Each dma-fence context refers to it's own
timeline.

For example, consider the following case where virgl submits
commands to the GPU (fence ids 1, 3) and does a metadata query with
the CPU (fence id 5).  In a different process, gfxstream submits
commands to the GPU (fence ids 2, 4).

fence_id (&dma_fence.seqno)       | 1 2 3 4 5
----------------------------------|-----------
fence_ctx 0 (virgl gpu)           | 1   3
fence_ctx 1 (virgl metadata query)|         5
fence_ctx 2 (gfxstream gpu)       |   2   4

With multiple fence contexts, we can wait for the metadata query
to finish without waiting for the virgl gpu to finish.  virgl gpu
does not have to wait for gfxstream gpu.  The fence id still is the
monotonically increasing sequence number, but it's only revelant to
the specific dma-fence context.

To fully enable this feature, we'll need to:
  - have each 3d context allocate a number of fence contexts. Not
    too hard with explicit context initialization on the horizon.
  - have guest userspace specify fence context when performing
    ioctls.
  - tag each fence emitted to the host with the fence context
    information.  virtio_gpu_ctrl_hdr has padding + flags available,
    so that should be easy.

This change goes in the direction specified above, by:
  - looking up the virtgpu_fence given a fence_id
  - signalling all prior fences in a given context
  - signalling current fence

v2: fix grammar in comment
v3: add r-b tags

Reviewed-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20201201021623.619-3-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: rework virtio_fence_signaled

virtio_gpu_fence_event_process sets the last_fence_id and
subsequently calls dma_fence_signal_locked(..).

dma_fence_signal_locked(..) sets DMA_FENCE_FLAG_SIGNALED_BIT,
which is actually checked before &dma_fence_ops.(*signaled) is
called.

The check for last_fence_id is therefore a bit redundant, and
it will not be sufficient to check the last_fence_id for multiple
synchronization timelines.  Remove it.

v3: add r-b tags

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201201021623.619-2-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: virtio_{blah} --> virtio_gpu_{blah}

virtio_gpu typically uses the prefix virtio_gpu, but there are
a few places where the virtio prefix is used.  Modify this for
consistency.

v3: add r-b tags

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201201021623.619-1-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/ttm: stop destroying pinned ghost object

Daniel added a warning for this, but we were abusing that behavior here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 57fcd550eb15 ("drm/ttm: Warn on pinning without holding a reference")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/series/84456/

drm/nouveau: Drop mutex_lock_nested for atomic

Purely conjecture, but I think the original locking inversion with the
legacy page flip code between flipping and ttm's bo move function
shoudn't exist anymore with atomic: With atomic the bo pinning and
actual modeset commit is completely separated in the code patsh.

This annotation was originally added in

commit 060810d7abaabcab282e062c595871d661561400
Author: Ben Skeggs <bskeggs@redhat.com>
Date:   Mon Jul 8 14:15:51 2013 +1000

    drm/nouveau: fix locking issues in page flipping paths

due to

commit b580c9e2b7ba5030a795aa2fb73b796523d65a78
Author: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Date:   Thu Jun 27 13:48:18 2013 +0200

    drm/nouveau: make flipping lockdep safe

Acked-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201127163528.2221671-1-daniel.vetter@ffwll.ch

drm/gma500: Fix error return code in psb_driver_load()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 5c49fd3aa0ab ("gma500: Add the core DRM files and headers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130020216.1906141-1-zhangjialin11@huawei.com

drm/ttm/drivers: remove unecessary ttm_module.h include v2

ttm_module.h deals with internals of TTM and should never
be include outside of it.

v2: also move the file around

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/404885/

video: fbdev: nvidia: Fix set but not used warnings

Fix warnings by deleting unused code. The register reads are
kept as it is unknown if there are any hidden side-effects.

v2:
  - Update subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-21-sam@ravnborg.org

video: fbdev: neofb: Fix set but not used warning for CursorMem

Fix W=1 warnings by removing unused code

v2:
  - Updated subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Evgeny Novikov <novikov@ispras.ru>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-16-sam@ravnborg.org

video: fbdev: sstfb: Updated logging to fix set but not used warnings

Fix set but not used warnings by introducing no_printk variants
for the internal logging system for this driver.

Fix a new warning that popped up now that logging was checked for
correct printf format strings.

A more invasive fix had been to replace all the internal logging with
standard logging primitives - thats for another day.

v2:
  - Update subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Alex Dewar <alex.dewar90@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-20-sam@ravnborg.org

video: fbdev: mx3fb: Fix kernel-doc, set but not used and string warnings

Fix W=1 warnings:
- Fix kernel-doc
- Drop unused code/variables
- Use memcpy to copy a string without zero-termination
  strncpy() generates a warning

v2:
  - Updated subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Xiaofei Tan <tanxiaofei@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-19-sam@ravnborg.org

video: fbdev: tgafb: Fix kernel-doc and set but not used warnings

Fix W=1 warnings:
- Fix kernel-doc
- Drop unused code

v2:
  - Updated subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Joe Perches <joe@perches.com>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-18-sam@ravnborg.org

video: fbdev: pm2fb: Fix kernel-doc warnings

Fixed a few kernel-doc issues to fix the warnings.

v2:
  - Updated subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-15-sam@ravnborg.org

video: fbdev: riva: Fix kernel-doc and set but not used warnings

Fix W=1 warnings:
- Fix kernel-doc
- Drop unused variables/code

v2:
  - Updated subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-14-sam@ravnborg.org

video: fbdev: tdfx: Fix set but not used warning in att_outb()

The tmp variable was assigned but the result was never used,
so delete the tmp variable.

v2:
  - Update subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-13-sam@ravnborg.org

video: fbdev: via: Fix set but not used warning for mode_crt_table

Fix warning by deleting the variable. The function call
viafb_get_best_mode() was verified to have no side-effects,
and thus could be dropped too.

v2:
  - Update subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-12-sam@ravnborg.org

video: fbdev: sis: Fix set but not used warnings in sis_main

Fix warnings by dropping unused variable and the
unused assignments.

v2:
  - Update subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-11-sam@ravnborg.org

video: fbdev: sis: Fix set but not used warnings in init.c

Fix "set but not used" warnings by removing the code the assign the
variables and the definition of the variables.
A register read is kept as it may have unknown side-effects.

This removes a lot of unused code - which is always a good thing to do.

v2:
  - Updated subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-10-sam@ravnborg.org

video: fbdev: sis: Fix defined but not used warning of SiS_TVDelay

Fix W=1 warning by commenting unused SiS_TVDelay* variables.

The SiS_TVDelay* variables seem to contain some magic numbers
so looks like data worth keeping around but not as code we build.

v2:
  - Update subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-9-sam@ravnborg.org

video: fbdev: sis: Fix defined but not used warnings

init.h defines static symbols, so it should only be included
once. Drop the include from sis.h as it is not needed.
This fixes a lot of warnings seen with a W=1 build.

v2:
  - Update subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-8-sam@ravnborg.org

video: fbdev: aty: Fix set but not used warnings in mach64_ct

Fix W=1 warnings about variables assigned but never used.
- One variable is only used when CONFIG_FB_ATY_GENERIC_LCD is defined
  Fix so variable is only defined with CONFIG_FB_ATY_GENERIC_LCD
- Several variables was only assigned by a call to aty_ld_le32().
  Drop the variables but keep the call to aty_ld_le32() as it may
  have unexpected side-effects.

v2:
  - Updated subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-7-sam@ravnborg.org

video: fbdev: aty: Fix set but not used warnings

Fix W=1 warnings about variables assigned but never used.

- Drop variables that were set but never used
- Make variable definition conditional on ATARI

v2:
  - Fix m68k build error (kernel test robot)
  - Improve subject (Lee Jones)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: kernel test robot <lkp@intel.com> # m68k build fix
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joe Perches <joe@perches.com>
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-6-sam@ravnborg.org

video: fbdev: aty: Delete unused variable in radeon_monitor

Fix warning about variable that is asssigned a value but never used.
The variable was indeed never used so delete it.

Keep the call to radeon_probe_i2c_connector() as it may have
side-effects. It is unlikely but I could not verify that is was safe to
drop the call.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-5-sam@ravnborg.org

drm/prime: split array import functions v4

Mapping the imported pages of a DMA-buf into an userspace process
doesn't work as expected.

But we have reoccurring requests on this approach, so split the
functions for this and  document that dma_buf_mmap() needs to be used
instead.

v2: split it into two functions
v3: rebased on latest changes
v4: update commit message a bit

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/403838/

drm/ttm: nuke ttm_dma_tt_init

Not used any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/403837/

drm/qxl: switch to ttm_sg_tt_init

The function qxl_gem_prime_import_sg_table is not fully implemented.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/403833/

drm/vmwgfx: switch to ttm_sg_tt_init

According to Daniel VMWGFX doesn't support DMA-buf anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/403834/

drm/nouveau: stop using pages with drm_prime_sg_to_page_addr_arrays v2

This is deprecated, also drop the comment about faults.

v2: also use ttm_sg_tt_init to avoid allocating the page array.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/403835/

drm/amdgpu: stop using pages with drm_prime_sg_to_page_addr_arrays

This is deprecated.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/403836/

drm/radeon: stop using pages with drm_prime_sg_to_page_addr_arrays v2

This is deprecated.

v2: also use ttm_sg_tt_init to avoid allocating the page array.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/403832/

drm/cma-helper: Implement mmap as GEM CMA object functions

The new GEM object function drm_gem_cma_mmap() sets the VMA flags
and offset as in the old implementation and immediately maps in the
buffer's memory pages.

Changing CMA helpers to use the GEM object function allows for the
removal of the special implementations for mmap and gem_prime_mmap
callbacks. The regular functions drm_gem_mmap() and drm_gem_prime_mmap()
are now used.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123115646.11004-3-tzimmermann@suse.de

drm/cma-helper: Remove prime infix from GEM object functions

These functions are not directly related to PRIME interfaces any
longer, but are now GEM object functions. Rename them accordingly
and fix the docs.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123115646.11004-2-tzimmermann@suse.de

drm: panel: simple: Add BOE NV110WTM-N61

Add support for the BOE NV110WTM-N61 panel.  The EDID lists two modes
(one for 60 Hz refresh rate and one for 40 Hz), so we'll list both of
them here.

Note that the panel datasheet requires 80 ms between HPD asserting and
the backlight power being turned on.  We'll use the new timing
constraints structure to do this cleanly.  This assumes that the
backlight will be enabled _after_ the panel enable finishes.  This is
how it works today and seems a sane assumption.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.4.I71b2118dfc00fd7b43b02d28e7b890081c2acfa2@changeid

dt-bindings: dt-bindings: display: simple: Add BOE NV110WTM-N61

Add yet another eDP panel.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.5.I28d9e32b3cc0aae980ecc39d364263a3f9871298@changeid

drm: panel: simple: Allow specifying the delay from prepare to enable

On the panel I'm looking at, there's an 80 ms minimum time between HPD
being asserted by the panel and setting the backlight enable GPIO.
While we could just add an 80 ms "enable" delay, this is not ideal.
Link training is allowed to happen in parallel with this delay so the
fixed 80 ms delay over-delays.

We'll support this by logging the time at the end of prepare and then
delaying in enable if enough time hasn't passed.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.3.Ib9ce3c6482f464bf594161581521ced46bbd54ed@changeid

drm: panel: simple: Defer unprepare delay till next prepare to shorten it

It is believed that all of the current users of the "unprepare" delay
don't actually need to wait the amount of time specified directly in
the unprepare phase.  The purpose of the delay that's specified is to
allow the panel to fully power off so that we don't try to power it
back on before it's managed to full power down.

Let's use this observation to avoid the fixed delay that we currently
have.  Instead of delaying, we'll note the current time when the
unprepare happens.  If someone then tries to prepare the panel later
and not enough time has passed, we'll do the delay before starting the
prepare phase.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.2.I06a95d83e7fa1bd919c8edd63dacacb5436e495a@changeid

drm: panel: simple: Fixup the struct panel_desc kernel doc

When I run:
  scripts/kernel-doc -rst drivers/gpu/drm/panel/panel-simple.c

I see that several of the kernel-doc entries aren't showing up because
they don't specify the full path down the hierarchy.  Let's fix that
and also move to inline kernel docs.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109170018.v4.1.Icaa86f0a4ca45a9a7184da4bc63386b29792d613@changeid

drm/kmb: Remove an unnecessary NULL check

The NULL checking isn't done consistently in this function and it leads
to a static checker warning:

    drivers/gpu/drm/kmb/kmb_drv.c:561 kmb_pm_suspend()
    error: we previously assumed 'drm' could be null (see line 559)

Fortunately "drm" cannot be NULL at this point so the check can just be
removed.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117072137.GB1111239@mwanda

omapfb: fbcon: remove trailing semicolon in macro definition

The macro use will already have a semicolon.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127190508.2842786-1-trix@redhat.com

video: fbdev: s1d13xxxfb: Fix kernel-doc and set but not used warnings

Fix following W=1 warnings:
- Fix set but not used variables that were used only for logging.
  Fixed by introducing no_printk() to trick compiler to think variables
  are used
- Fix kernel-doc warning by deleting an empty comment line

v3:
  - Fix grammar in commit message (Thomas)
v2:
  - Subject updated (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-29-sam@ravnborg.org

video: fbcon: Fix warnings by using pr_debug() in fbcon

Replacing DPRINTK() statements with pr_debug fixes set but not used
warnings.  And moves to a more standard logging setup at the same time.

v2:
  - Fix indent (Joe)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-3-sam@ravnborg.org

video: Fix kernel-doc warnings in of_display_timing + of_videomode

Fix kernel-doc warnings reported when using W=1.

v3:
  - Do not replace '-' with ':' (Thomas)

v2:
  - Improve subject (Lee)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-2-sam@ravnborg.org

drm/rockchip: fix typo in Kconfig 's/HDMI/dsi/'

In the help of ROCKCHIP_DW_MIPI_DSI it said
it is a HDMI driver instead of a dsi driver.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116141609.26719-1-dafna.hirschfeld@collabora.com

drm/rockchip: for error print, use the correct device pointer

There is a use of DRM_DEV_ERROR(dsi->dev,..)
which should be replaced with DRM_DEV_ERROR(dev, ..)
since dsi->dev is set later

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116141609.26719-2-dafna.hirschfeld@collabora.com

drm/rockchip: dw_hdmi: fix incorrect clock in vpll clock error message

Error message incorrectly refers to grf clock instead of vpll clock.

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201024035321.4898-1-net147@gmail.com

drm/ingenic: Add basic PM support

Call drm_mode_config_helper_suspend() and
drm_mode_config_helper_resume() on suspend and resume, respectively.

This makes sure that the display stack is properly disabled when the
hardware is put to sleep.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201128171606.132830-1-paul@crapouillou.net

drm/ttm: Warn on pinning without holding a reference

Not technically a problem for ttm, but very likely a driver bug and
pretty big time confusing for reviewing code.

So warn about it, both at cleanup time (so we catch these for sure)
and at pin/unpin time (so we know who's the culprit).

Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028113120.3641237-1-daniel.vetter@ffwll.ch

fbdev: aty: SPARC64 requires FB_ATY_CT

It looks like SPARC64 requires FB_ATY_CT to build without errors,
so have FB_ATY select FB_ATY_CT if both SPARC64 and PCI are enabled
instead of using "default y if SPARC64 && PCI", which is not strong
enough to prevent build errors.

As it currently is, FB_ATY_CT can be disabled, resulting in build
errors:

ERROR: modpost: "aty_postdividers" [drivers/video/fbdev/aty/atyfb.ko] undefined!
ERROR: modpost: "aty_ld_pll_ct" [drivers/video/fbdev/aty/atyfb.ko] undefined!

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: f7018c213502 ("video: move fbdev to drivers/video/fbdev")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127031752.10371-1-rdunlap@infradead.org

via/via_irq: use __func__ to replace string function name

This change also fix checkpatch.pl warning:
WARNING: Prefer using '"%s...", __func__' to using
'via_driver_irq_postinstall', this function's name, in a string
+ DRM_DEBUG("via_driver_irq_postinstall\n");

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119072957.108941-1-bernard@vivo.com

drm/radeon: fix check order in radeon_bo_move

Reorder the code to fix checking if blitting is available.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 28a68f828266 ("drm/radeon/ttm: use multihop")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/403847/

drm/imx/dcss: allow using nearest neighbor interpolation scaling

This patch adds support for using NN interpolation scaling by setting the
SCALING_FILTER plane property to 1. Otherwise, the default method is used.

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105145018.27255-1-laurentiu.palcu@oss.nxp.com

drm/imx/dcss: fix coccinelle warning

This small patch fixes a warning that I got while running coccinelle:

  CHECK   drivers/gpu/drm/imx/dcss/dcss-plane.c
  drivers/gpu/drm/imx/dcss/dcss-plane.c:107:21-23: WARNING !A || A && B is equivalent to !A || B

Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105140127.25249-3-laurentiu.palcu@oss.nxp.com

drm/imx/dcss: fix rotations for Vivante tiled formats

DCSS supports 90/180/270 degree rotations for Vivante tiled and super-tiled
formats. Unfortunately, with the current code, they didn't work properly.

This simple patch makes the rotations work by fixing the way the scaler is set
up for 90/270 degree rotations. In this particular case, the source width and
height need to be swapped since DPR is sending the buffer to scaler already
rotated.

Also, make sure to allow full rotations for DRM_FORMAT_MOD_VIVANTE_SUPER_TILED.

Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105140127.25249-2-laurentiu.palcu@oss.nxp.com

drm/mcde: fix masking and bitwise-or on variable val

The masking of val with ~MCDE_CRX1_CLKSEL_MASK is currently being
ignored because there seems to be a missing bitwise-or of val in the
following statement.  Fix this by replacing the assignment of val
with a bitwise-or.

Fixes: d795fd322063 ("drm/mcde: Support DPI output")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Unused valued")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124121528.395681-1-colin.king@canonical.com

dma-buf/dma-resv: Respect num_fences when initializing the shared fence list.

We hardcode the maximum number of shared fences to 4, instead of
respecting num_fences. Use a minimum of 4, but more if num_fences
is higher.

This seems to have been an oversight when first implementing the
api.

Fixes: 04a5faa8cbe5 ("reservation: update api and add some helpers")
Cc: <stable@vger.kernel.org> # v3.17+
Reported-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124115707.406917-1-maarten.lankhorst@linux.intel.com

panel-simple: add Innolux N125HCE-GN1

The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop,
attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge.

Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201124172604.981746-1-lukas@mntre.com

dt-bindings: display/panel: add Innolux N125HCE-GN1

The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop,
attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge. This patch
contains the DT binding for "innolux,n125hce-gn1".

Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[reorder so comments comes before the compatible]
Link: https://patchwork.freedesktop.org/patch/msgid/20201124172604.981746-2-lukas@mntre.com

drm: fix kernel-doc warnings for SCALING_FILTER

This patch fixes the following kernel-doc warnings:

    /home/simon/src/linux/Documentation/gpu/drm-kms:466: ./drivers/gpu/drm/drm_crtc.c:236: WARNING: Unexpected indentation.
    /home/simon/src/linux/Documentation/gpu/drm-kms:466: ./drivers/gpu/drm/drm_crtc.c:237: WARNING: Block quote ends without a blank line; unexpected unindent.
    /home/simon/src/linux/Documentation/gpu/drm-kms:472: ./drivers/gpu/drm/drm_blend.c:203: WARNING: Unexpected indentation.
    /home/simon/src/linux/Documentation/gpu/drm-kms:472: ./drivers/gpu/drm/drm_blend.c:204: WARNING: Block quote ends without a blank line; unexpected unindent.

Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 5c759eda9b04 ("drm: Introduce plane and CRTC scaling filter properties")
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/zJEUxNx4GwiY4FnqlVsuXdAWuH624SQ9VfN54NeH5E@cp7-web-043.plabs.ch

drm/fb-helper: Acquire modeset lock around shadow-buffer flushing

Flushing the fbdev's shadow buffer requires vmap'ing the BO memory, which
in turn requires pinning the BO. While being pinned, the BO cannot be moved
into VRAM for scanout. Consequently, a concurrent modeset operation that
involves the fbdev framebuffer would likely fail.

Resolve this problem be acquiring the modeset lock of the planes that use
the fbdev framebuffer. On non-atomic drivers, also acquire the mode-config
lock. This serializes the flushing of the framebuffer with concurrent
modeset operations.

v2:
* only acquire struct drm_fb_helper.lock in damage blitter (Daniel,
  Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-11-tzimmermann@suse.de

drm/fb-helper: Copy dma-buf map before flushing shadow fb

Copy the vmap()'ed instance of struct dma_buf_map before modifying it,
in case the implementation of vunmap() depends on the exact address.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-10-tzimmermann@suse.de

drm/fb-helper: Restore damage area upon errors

If the damage handling fails, restore the damage area. The next invocation
of the damage worker will then perform the update.

v3:
* Use drm_WARN_ONCE() with an error message to print warning
v2:
* print a single warning if dirty callback fails (Daniel, Sebastian)
* update comment

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-9-tzimmermann@suse.de

drm/fb-helper: Move damage blit code and its setup into separate routine

Introduce a separate function for the blit code and its vmap setup. Done
in preparation of additional changes. No functional changes are made.

v3:
* Use drm_WARN_ONCE() with an error message to print warning
v2:
* print a single warning if damage blitter fails

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-8-tzimmermann@suse.de

drm/fb-helper: Separate shadow-buffer flushing and calling dirty callback

Flushing the shadow framebuffer and invoking the dirty callback are two
separate operations, so do them separately. The flush operation is paired
with calls to vmap and vunmap. They are not needed for the dirty callback,
which performs its own invocations if necessary.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-7-tzimmermann@suse.de

drm/fb-helper: Return early in damage worker

Returning early in the damage worker if no update is required. Makes the
code more readable. No functional changes are being made.

v3:
* s/dirty/damage in commit message (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-6-tzimmermann@suse.de

drm/fb-helper: Rename dirty worker to damage worker

The dirty worker handles all damage updates, instead of just calling
the framebuffer's dirty callback. Rename it to damage worker. Also
rename related variables accordingly. No functional changes are made.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-5-tzimmermann@suse.de

drm/client: Depend on GEM object kmap ref-counting

DRM client's vmap/vunmap functions don't allow for multiple vmap
operations. Calling drm_client_buffer_vmap() twice returns the same
mapping, then calling drm_client_buffer_vunmap() twice already unmaps
on the first call. This leads to unbalanced vmap refcounts. Fix this
by calling drm_gem_vmap() unconditionally in drm_client_buffer_vmap().

All drivers that support DRM clients have to implement correct ref-
counting for their vmap operations, or not vunmap at all. This is the
case for drivers that use CMA, SHMEM and VRAM helpers, and QXL. Other
drivers are not affected.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-4-tzimmermann@suse.de

drm/fb-helper: Unmap client buffer during shutdown

The fbdev helper's generic probe function establishes a mapping for
framebuffers without shadow buffer. The clean-up function did not unmap
the buffer object. Add the unmap operation.

As fbdev devices are usally released during system shutdown, this has
not been a problem in practice.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-3-tzimmermann@suse.de

drm/fb-helper: Call dirty helper after writing to fbdev

If fbdev uses a shadow framebuffer, call the damage handler. Otherwise
the update might not make it to the screen.

v2:
* mark virtual screen as dirty (Ville)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 222ec45f4c69 ("drm/fb_helper: Support framebuffers in I/O memory")
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-2-tzimmermann@suse.de

drm/shmem-helper: Removed drm_gem_shmem_create_object_cached()

Cached page mappings are now the default for SHMEM GEM objects. Remove
the obsolete create function for cached mappings.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117133156.26822-3-tzimmermann@suse.de

drm/shmem-helper: Use cached mappings by default

SHMEM-buffer backing storage is allocated from system memory; which is
typically cachable. The default mode for SHMEM objects is writecombine
though.

Unify SHMEM semantics by defaulting to cached mappings. The exception
is pages imported via dma-buf. DMA memory is usually not cached.

DRM drivers that require write-combined mappings set the map_wc flag
in struct drm_gem_shmem_object to true. This currently affects lima,
panfrost and v3d.

The drivers mgag200, udl, virtio and vkms continue to use default
shmem mappings.

The drivers cirrus and gm12u320 change caching flags. Both used
writecombine and now switch over to shmem defaults. Both drivers use
SHMEM objects as shadow buffers for internal video memory, so cached
mappings will not affect them negatively.

v3:
* set value of shmem pointer before dereferencing it in
  __drm_gem_shmem_create() (Dan, kernel test robot)
v2:
* recreate patch on top of latest SHMEM helpers
* update lima, panfrost, v3d to select writecombine (Daniel, Rob)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117133156.26822-2-tzimmermann@suse.de

drm/mcde: Fix uninitialized value

"val" isn't initialized on the default: errorpath.
Just return from the function if this happens.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119140707.1008407-1-linus.walleij@linaro.org

drm/mcde: Support DPI output

This implements support for DPI output using the port node
in the device tree to connect a DPI LCD display to the
MCDE. The block also supports TV-out but we leave that
for another day when we have a hardware using it.

We implement parsing and handling of the "port" node,
and follow that to the DPI endpoint.

The clock divider used by the MCDE to divide down the
"lcdclk" (this has been designed for TV-like frequencies)
is represented by an ordinary clock provider internally
in the MCDE. This idea was inspired by the PL111 solution
by Eric Anholt: the divider also works very similar to
the Pl111 clock divider.

We take care to clear up some errors regarding the number
of available formatters and their type. We have 6 DSI
formatters and 2 DPI formatters.

Tested on the Samsung GT-I9070 Janice mobile phone.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: upstreaming@lists.sr.ht
Link: https://patchwork.freedesktop.org/patch/msgid/20201112142925.2571179-2-linus.walleij@linaro.org

drm/mcde: Break out DSI set-up routine

To be able to support DPI without messing things up we
first break out the DSI set-up to a separate function.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: upstreaming@lists.sr.ht
Link: https://patchwork.freedesktop.org/patch/msgid/20201112142925.2571179-1-linus.walleij@linaro.org

drm/mcde: Fix RGB/BGR bug

I was confused when the graphics came out with blue
penguins on the DPI panel.

It turns out that the so-called "packed RGB666" mode
on the DSI formatter is incorrect: this mode is the
actual RGB888 mode, and the mode called RGB888 is
BGR888.

The claims that the MCDE had inverse RGB/BGR buffer
formats was wrong, so correct this and the buggy
register and everything is much more consistent, and
graphics look good on all targets, both DPI and
DSI.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: phone-devel@vger.kernel.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175413.869871-1-linus.walleij@linaro.org