net/mlx5e: Use correct encap attribute during invalidation

commit be071cdb167fc3e25fe81922166b3d499d23e8ac upstream.

With introduction of post action infrastructure most of the users of encap
attribute had been modified in order to obtain the correct attribute by
calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action
is always on default attribute. However, the cited commit didn't modify
mlx5e_invalidate_encap() which prevents it from destroying correct modify
header action which leads to a warning [0]. Fix the issue by using correct
attribute.

[0]:

Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace:
Feb 21 09:47:35 c-237-177-40-045 kernel:  <TASK>
Feb 21 09:47:35 c-237-177-40-045 kernel:  mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? lock_downgrade+0x6d0/0x6d0
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel:  process_one_work+0x7c2/0x1310
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? pwq_dec_nr_in_flight+0x230/0x230
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? rwlock_bug.part.0+0x90/0x90
Feb 21 09:47:35 c-237-177-40-045 kernel:  worker_thread+0x59d/0xec0
Feb 21 09:47:35 c-237-177-40-045 kernel:  ? __kthread_parkme+0xd9/0x1d0

Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix deadlock in tc route query code

commit 691c041bf20899fc13c793f92ba61ab660fa3a30 upstream.

Cited commit causes ABBA deadlock[0] when peer flows are created while
holding the devcom rw semaphore. Due to peer flows offload implementation
the lock is taken much higher up the call chain and there is no obvious way
to easily fix the deadlock. Instead, since tc route query code needs the
peer eswitch structure only to perform a lookup in xarray and doesn't
perform any sleeping operations with it, refactor the code for lockless
execution in following ways:

- RCUify the devcom 'data' pointer. When resetting the pointer
synchronously wait for RCU grace period before returning. This is fine
since devcom is currently only used for synchronization of
pairing/unpairing of eswitches which is rare and already expensive as-is.

- Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has
already been used in some unlocked contexts without proper
annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't
an issue since all relevant code paths checked it again after obtaining the
devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as
"best effort" check to return NULL when devcom is being unpaired. Note that
while RCU read lock doesn't prevent the unpaired flag from being changed
concurrently it still guarantees that reader can continue to use 'data'.

- Refactor mlx5e_tc_query_route_vport() function to use new
mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock.

[0]:

[  164.599612] ======================================================
[  164.600142] WARNING: possible circular locking dependency detected
[  164.600667] 6.3.0-rc3+ #1 Not tainted
[  164.601021] ------------------------------------------------------
[  164.601557] handler1/3456 is trying to acquire lock:
[  164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.603078]
               but task is already holding lock:
[  164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[  164.604459]
               which lock already depends on the new lock.

[  164.605190]
               the existing dependency chain (in reverse order) is:
[  164.605848]
               -> #1 (&comp->sem){++++}-{3:3}:
[  164.606380]        down_read+0x39/0x50
[  164.606772]        mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[  164.607336]        mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core]
[  164.607914]        mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core]
[  164.608495]        mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core]
[  164.609063]        mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core]
[  164.609627]        __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[  164.610175]        mlx5e_configure_flower+0x952/0x1a20 [mlx5_core]
[  164.610741]        tc_setup_cb_add+0xd4/0x200
[  164.611146]        fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[  164.611661]        fl_change+0xc95/0x18a0 [cls_flower]
[  164.612116]        tc_new_tfilter+0x3fc/0xd20
[  164.612516]        rtnetlink_rcv_msg+0x418/0x5b0
[  164.612936]        netlink_rcv_skb+0x54/0x100
[  164.613339]        netlink_unicast+0x190/0x250
[  164.613746]        netlink_sendmsg+0x245/0x4a0
[  164.614150]        sock_sendmsg+0x38/0x60
[  164.614522]        ____sys_sendmsg+0x1d0/0x1e0
[  164.614934]        ___sys_sendmsg+0x80/0xc0
[  164.615320]        __sys_sendmsg+0x51/0x90
[  164.615701]        do_syscall_64+0x3d/0x90
[  164.616083]        entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  164.616568]
               -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}:
[  164.617210]        __lock_acquire+0x159e/0x26e0
[  164.617638]        lock_acquire+0xc2/0x2a0
[  164.618018]        __mutex_lock+0x92/0xcd0
[  164.618401]        mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.618943]        post_process_attr+0x153/0x2d0 [mlx5_core]
[  164.619471]        mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core]
[  164.620021]        __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[  164.620564]        mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core]
[  164.621125]        tc_setup_cb_add+0xd4/0x200
[  164.621531]        fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[  164.622047]        fl_change+0xc95/0x18a0 [cls_flower]
[  164.622500]        tc_new_tfilter+0x3fc/0xd20
[  164.622906]        rtnetlink_rcv_msg+0x418/0x5b0
[  164.623324]        netlink_rcv_skb+0x54/0x100
[  164.623727]        netlink_unicast+0x190/0x250
[  164.624138]        netlink_sendmsg+0x245/0x4a0
[  164.624544]        sock_sendmsg+0x38/0x60
[  164.624919]        ____sys_sendmsg+0x1d0/0x1e0
[  164.625340]        ___sys_sendmsg+0x80/0xc0
[  164.625731]        __sys_sendmsg+0x51/0x90
[  164.626117]        do_syscall_64+0x3d/0x90
[  164.626502]        entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  164.626995]
               other info that might help us debug this:

[  164.627725]  Possible unsafe locking scenario:

[  164.628268]        CPU0                    CPU1
[  164.628683]        ----                    ----
[  164.629098]   lock(&comp->sem);
[  164.629421]                                lock(&esw->offloads.encap_tbl_lock);
[  164.630066]                                lock(&comp->sem);
[  164.630555]   lock(&esw->offloads.encap_tbl_lock);
[  164.630993]
                *** DEADLOCK ***

[  164.631575] 3 locks held by handler1/3456:
[  164.631962]  #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[  164.632703]  #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core]
[  164.633552]  #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[  164.634435]
               stack backtrace:
[  164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1
[  164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  164.636340] Call Trace:
[  164.636616]  <TASK>
[  164.636863]  dump_stack_lvl+0x47/0x70
[  164.637217]  check_noncircular+0xfe/0x110
[  164.637601]  __lock_acquire+0x159e/0x26e0
[  164.637977]  ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core]
[  164.638472]  lock_acquire+0xc2/0x2a0
[  164.638828]  ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.639339]  ? lock_is_held_type+0x98/0x110
[  164.639728]  __mutex_lock+0x92/0xcd0
[  164.640074]  ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.640576]  ? __lock_acquire+0x382/0x26e0
[  164.640958]  ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.641468]  ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.641965]  mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[  164.642454]  ? lock_release+0xbf/0x240
[  164.642819]  post_process_attr+0x153/0x2d0 [mlx5_core]
[  164.643318]  mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core]
[  164.643835]  __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[  164.644340]  mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core]
[  164.644862]  ? lock_acquire+0xc2/0x2a0
[  164.645219]  tc_setup_cb_add+0xd4/0x200
[  164.645588]  fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[  164.646067]  fl_change+0xc95/0x18a0 [cls_flower]
[  164.646488]  tc_new_tfilter+0x3fc/0xd20
[  164.646861]  ? tc_del_tfilter+0x810/0x810
[  164.647236]  rtnetlink_rcv_msg+0x418/0x5b0
[  164.647621]  ? rtnl_setlink+0x160/0x160
[  164.647982]  netlink_rcv_skb+0x54/0x100
[  164.648348]  netlink_unicast+0x190/0x250
[  164.648722]  netlink_sendmsg+0x245/0x4a0
[  164.649090]  sock_sendmsg+0x38/0x60
[  164.649434]  ____sys_sendmsg+0x1d0/0x1e0
[  164.649804]  ? copy_msghdr_from_user+0x6d/0xa0
[  164.650213]  ___sys_sendmsg+0x80/0xc0
[  164.650563]  ? lock_acquire+0xc2/0x2a0
[  164.650926]  ? lock_acquire+0xc2/0x2a0
[  164.651286]  ? __fget_files+0x5/0x190
[  164.651644]  ? find_held_lock+0x2b/0x80
[  164.652006]  ? __fget_files+0xb9/0x190
[  164.652365]  ? lock_release+0xbf/0x240
[  164.652723]  ? __fget_files+0xd3/0x190
[  164.653079]  __sys_sendmsg+0x51/0x90
[  164.653435]  do_syscall_64+0x3d/0x90
[  164.653784]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  164.654229] RIP: 0033:0x7f378054f8bd
[  164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48
[  164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[  164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd
[  164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014
[  164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c
[  164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0
[  164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540

Fixes: f9d196bd632b ("net/mlx5e: Use correct eswitch for stack devices with lag")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix SQ wake logic in ptp napi_poll context

commit 7aa50380191635e5897a773f272829cc961a2be5 upstream.

Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken
up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb
fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up.

Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/mellanox: mlxbf-pmc: fix sscanf() error checking

commit 95e4b25192e9238fd2dbe85d96dd2f8fd1ce9d14 upstream.

The sscanf() function never returns negatives.  It returns the number of
items successfully read.

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/4ccdfd28-099b-40bf-8d77-ad4ea2e76b93@kili.mountain
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

forcedeth: Fix an error handling path in nv_probe()

commit 5b17a4971d3b2a073f4078dd65331efbe35baa2d upstream.

If an error occures after calling nv_mgmt_acquire_sema(), it should be
undone with a corresponding nv_mgmt_release_sema() call.

Add it in the error handling path of the probe as already done in the
remove function.

Fixes: cac1c52c3621 ("forcedeth: mgmt unit interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: fix an issue that plpmtu can never go to complete state

commit 6ca328e985cd995dfd1d5de44046e6074f853fbb upstream.

When doing plpmtu probe, the probe size is growing every time when it
receives the ACK during the Search state until the probe fails. When
the failure occurs, pl.probe_high is set and it goes to the Complete
state.

However, if the link pmtu is huge, like 65535 in loopback_dev, the probe
eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails.
Because of that, pl.probe_high can not be set, and the plpmtu probe can
never go to the Complete state.

Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size
grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow
the probe size greater than SCTP_MAX_PLPMTU in the Complete state.

Fixes: b87641aff9e7 ("sctp: do state transition when a probe succeeds on HB ACK recv path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Wait Memory_Info_Valid before access memory related info

commit ce17ad0d54985e2595a3e615fda31df61808a08c upstream.

The Memory_Info_Valid bit (CXL 3.0 8.1.3.8.2) indicates that the CXL
Range Size High and Size Low registers are valid. The bit must be set
within 1 second of reset deassertion to the device. Check valid bit
before we check the Memory_Active bit when waiting for
cxl_await_media_ready() to ensure that the memory info is valid for
consumption. Also ensures both DVSEC ranges 1 and 2 are ready if DVSEC
Capability indicates they are both supported.

Fixes: 523e594d9cc0 ("cxl/pci: Implement wait for media active")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168444687469.3134781.11033518965387297327.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: avs: Access path components under lock

commit d849996f7458042af803b7d15a181922834c5249 upstream.

Path and its components should be accessed under lock to prevent
problems with one thread modifying them while other tries to read.

Fixes: c8c960c10971 ("ASoC: Intel: avs: APL-based platforms support")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: avs: Fix declaration of enum avs_channel_config

commit 1cf036deebcdec46d6348842bd2f8931202fd4cd upstream.

Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.

Fixes: 580a5912d1fe ("ASoC: Intel: avs: Declare module configuration types")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg

commit 95109657471311601b98e71f03d0244f48dc61bb upstream.

Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.

Fixes: 04afbbbb1cba ("ASoC: Intel: Skylake: Update the topology interface structure")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/show_trace_log_lvl: Ensure stack pointer is aligned, again

commit 2e4be0d011f21593c6b316806779ba1eba2cd7e0 upstream.

The commit e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned")
tried to align the stack pointer in show_trace_log_lvl(), otherwise the
"stack < stack_info.end" check can't guarantee that the last read does
not go past the end of the stack.

However, we have the same problem with the initial value of the stack
pointer, it can also be unaligned. So without this patch this trivial
kernel module

#include <linux/module.h>

static int init(void)
{
asm volatile("sub    $0x4,%rsp");
dump_stack();
asm volatile("add    $0x4,%rsp");

return -EAGAIN;
}

module_init(init);
MODULE_LICENSE("GPL");

crashes the kernel.

Fixes: e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned")
Signed-off-by: Vernon Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230512104232.GA10227@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()

commit 8fafac202d18230bb9926bda48e563fd2cce2a4f upstream.

In the pvcalls_new_active_socket() function, most error paths call
pvcalls_back_release_active(fedata->dev, fedata, map) which calls
sock_release() on "sock".  The bug is that the caller also frees sock.

Fix this by making every error path in pvcalls_new_active_socket()
release the sock, and don't free it in the caller.

Fixes: 5db4d286a8ef ("xen/pvcalls: implement connect command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/e5f98dc2-0305-491f-a860-71bbd1398a2f@kili.mountain
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pci/xen: populate MSI sysfs entries

commit 335b4223466dd75f9f3ea4918187afbadd22e5c8 upstream.

Commit bf5e758f02fc ("genirq/msi: Simplify sysfs handling") reworked the
creation of sysfs entries for MSI IRQs. The creation used to be in
msi_domain_alloc_irqs_descs_locked after calling ops->domain_alloc_irqs.
Then it moved into __msi_domain_alloc_irqs which is an implementation of
domain_alloc_irqs. However, Xen comes with the only other implementation
of domain_alloc_irqs and hence doesn't run the sysfs population code
anymore.

Commit 6c796996ee70 ("x86/pci/xen: Fixup fallout from the PCI/MSI
overhaul") set the flag MSI_FLAG_DEV_SYSFS for the xen msi_domain_info
but that doesn't actually have an effect because Xen uses it's own
domain_alloc_irqs implementation.

Fix this by making use of the fallback functions for sysfs population.

Fixes: bf5e758f02fc ("genirq/msi: Simplify sysfs handling")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230503131656.15928-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator

commit 91aa4b3782448a7a13baa8cbcdfd5fd19defcbd9 upstream.

This worked before by coincidence, as the regulator was probed and enabled
before PCI RC probe. But probe order changed since commit 259b93b21a9f
("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in
4.14") and PCIe supply is enabled after RC.
Fix this by adding the regulator to RC node.

The PCIe vaux regulator still needs to be enabled unconditionally for
Mini-PCIe USB-only devices.

Fixes: ef3846247b41 ("ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet()

commit f67bc15e526bb9920683ad6c1891ff9e08981335 upstream.

This code generates a Smatch warning:

    drivers/hwtracing/coresight/coresight-tmc-etr.c:947 tmc_etr_buf_insert_barrier_packet()
    error: uninitialized symbol 'bufp'.

The problem is that if tmc_sg_table_get_data() returns -EINVAL, then
when we test if "len < CORESIGHT_BARRIER_PKT_SIZE", the negative "len"
value is type promoted to a high unsigned long value which is greater
than CORESIGHT_BARRIER_PKT_SIZE.  Fix this bug by adding an explicit
check for error codes.

Fixes: 75f4e3619fe2 ("coresight: tmc-etr: Add transparent buffer management")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/7d33e244-d8b9-4c27-9653-883a13534b01@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: ISST: Remove 8 socket limit

commit bbb320bfe2c3e9740fe89cfa0a7089b4e8bfc4ff upstream.

Stop restricting the PCI search to a range of PCI domains fed to
pci_get_domain_bus_and_slot().  Instead, use for_each_pci_dev() and
look at all PCI domains in one pass.

On systems with more than 8 sockets, this avoids error messages like
"Information: Invalid level, Can't get TDP control information at
specified levels on cpu 480" from the intel speed select utility.

Fixes: aa2ddd242572 ("platform/x86: ISST: Use numa node id for cpu pci dev mapping")
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230519160420.2588475-1-steve.wahl@hpe.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: pca9450: Fix BUCK2 enable_mask

commit d67dada3e2524514b09496b9ee1df22d4507a280 upstream.

This fixes a copy & paste error.
No functional change intended, BUCK1_ENMODE_MASK equals BUCK2_ENMODE_MASK.

Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Originally-from: Robin Gong <yibin.gong@nxp.com
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de
Link: https://lore.kernel.org/r/20230512081935.2396180-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: fix undefined behavior in bit shift for SB_NOUSER

commit f15afbd34d8fadbd375f1212e97837e32bc170cc upstream.

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. It was spotted by UBSAN.

So let's just fix this by using the BIT() helper for all SB_* flags.

Fixes: e462ec50cb5f ("VFS: Differentiate mount flags (MS_*) from internal superblock flags")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Message-Id: <20230424051835.374204-1-gehao@kylinos.cn>
[brauner@kernel.org: use BIT() for all SB_* flags]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: arm_ffa: Fix FFA device names for logical partitions

commit 19b8766459c41c6f318f8a548cc1c66dffd18363 upstream.

Each physical partition can provide multiple services each with UUID.
Each such service can be presented as logical partition with a unique
combination of VM ID and UUID. The number of distinct UUID in a system
will be less than or equal to the number of logical partitions.

However, currently it fails to register more than one logical partition
or service within a physical partition as the device name contains only
VM ID while both VM ID and UUID are maintained in the partition information.
The kernel complains with the below message:

  | sysfs: cannot create duplicate filename '/devices/arm-ffa-8001'
  | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8
  | Hardware name: FVP Base RevC (DT)
  | Call trace:
  |  dump_backtrace+0xf8/0x118
  |  show_stack+0x18/0x24
  |  dump_stack_lvl+0x50/0x68
  |  dump_stack+0x18/0x24
  |  sysfs_create_dir_ns+0xe0/0x13c
  |  kobject_add_internal+0x220/0x3d4
  |  kobject_add+0x94/0x100
  |  device_add+0x144/0x5d8
  |  device_register+0x20/0x30
  |  ffa_device_register+0x88/0xd8
  |  ffa_setup_partitions+0x108/0x1b8
  |  ffa_init+0x2ec/0x3a4
  |  do_one_initcall+0xcc/0x240
  |  do_initcall_level+0x8c/0xac
  |  do_initcalls+0x54/0x94
  |  do_basic_setup+0x1c/0x28
  |  kernel_init_freeable+0x100/0x16c
  |  kernel_init+0x20/0x1a0
  |  ret_from_fork+0x10/0x20
  | kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to
  | register things with the same name in the same directory.
  | arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17
  | ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001

By virtue of being random enough to avoid collisions when generated in a
distributed system, there is no way to compress UUID keys to the number
of bits required to identify each. We can eliminate '-' in the name but
it is not worth eliminating 4 bytes and add unnecessary logic for doing
that. Also v1.0 doesn't provide the UUID of the partitions which makes
it hard to use the same for the device name.

So to keep it simple, let us alloc an ID using ida_alloc() and append the
same to "arm-ffa" to make up a unique device name. Also stash the id value
in ffa_dev to help freeing the ID later when the device is destroyed.

Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Reported-by: Lucian Paul-Trifu <lucian.paul-trifu@arm.com>
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-3-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: arm_ffa: Check if ffa_driver remove is present before executing

commit b71b55248a580e9c9befc4ae060539f1f8e477da upstream.

Currently ffa_drv->remove() is called unconditionally from
ffa_device_remove(). Since the driver registration doesn't check for it
and allows it to be registered without .remove callback, we need to check
for the presence of it before executing it from ffa_device_remove() to
above a NULL pointer dereference like the one below:

  | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  | Mem abort info:
  |   ESR = 0x0000000086000004
  |   EC = 0x21: IABT (current EL), IL = 32 bits
  |   SET = 0, FnV = 0
  |   EA = 0, S1PTW = 0
  |   FSC = 0x04: level 0 translation fault
  | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000
  | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
  | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP
  | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6
  | Hardware name: FVP Base RevC (DT)
  | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c)
  | pc : 0x0
  | lr : ffa_device_remove+0x20/0x2c
  | Call trace:
  |  0x0
  |  device_release_driver_internal+0x16c/0x260
  |  driver_detach+0x90/0xd0
  |  bus_remove_driver+0xdc/0x11c
  |  driver_unregister+0x30/0x54
  |  ffa_driver_unregister+0x14/0x20
  |  cleanup_module+0x18/0xeec
  |  __arm64_sys_delete_module+0x234/0x378
  |  invoke_syscall+0x40/0x108
  |  el0_svc_common+0xb4/0xf0
  |  do_el0_svc+0x30/0xa4
  |  el0_svc+0x2c/0x7c
  |  el0t_64_sync_handler+0x84/0xf0
  |  el0t_64_sync+0x190/0x194

Fixes: 244f5d597e1e ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type")
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-1-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

optee: fix uninited async notif value

commit 654d0310007146fae87b0c1a68f81e53ad519b14 upstream.

Fixes an uninitialized variable in irq_handler() that could lead to
unpredictable behavior in case OP-TEE fails to handle SMC function ID
OPTEE_SMC_GET_ASYNC_NOTIF_VALUE. This change ensures that in that case
get_async_notif_value() properly reports there are no notification
event.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202304200755.OoiuclDZ-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/all/d9b7f69b-c737-4cb3-8e74-79fe00c934f9@kili.mountain/
Fixes: 6749e69c4dad ("optee: add asynchronous notifications")
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: sbs-charger: Fix INHIBITED bit for Status reg

commit b2f2a3c9800208b0db2c2e34b05323757117faa2 upstream.

CHARGE_INHIBITED bit position of the ChargerStatus register is actually
0 not 1. This patch corrects it.

Fixes: feb583e37f8a8 ("power: supply: add sbs-charger driver")
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq24190: Call power_supply_changed() after updating input current

commit 77c2a3097d7029441e8a91aa0de1b4e5464593da upstream.

The bq24192 model relies on external charger-type detection and once
that is done the bq24190_charger code will update the input current.

In this case, when the initial power_supply_changed() call is made
from the interrupt handler, the input settings are 5V/0.5A which
on many devices is not enough power to charge (while the device is on).

On many devices the fuel-gauge relies in its external_power_changed
callback to timely signal userspace about charging <-> discharging
status changes. Add a power_supply_changed() call after updating
the input current. This allows the fuel-gauge driver to timely recheck
if the battery is charging after the new input current has been applied
and then it can immediately notify userspace about this.

Fixes: 18f8e6f695ac ("power: supply: bq24190_charger: Get input_current_limit from our supplier")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq25890: Call power_supply_changed() after updating input current or voltage

commit ad3d9c779b1f09f3f3a6fefd07af407c7bc7c9a7 upstream.

The bq25892 model relies on external charger-type detection and once
that is done the bq25890_charger code will update the input current
and if pumpexpress is used also the input voltage.

In this case, when the initial power_supply_changed() call is made
from the interrupt handler, the input settings are 5V/0.5A which
on many devices is not enough power to charge (while the device is on).

On many devices the fuel-gauge relies in its external_power_changed
callback to timely signal userspace about charging <-> discharging
status changes. Add a power_supply_changed() call after updating
the input current or voltage. This allows the fuel-gauge driver
to timely recheck if the battery is charging after the new input
settings have been applied and then it can immediately notify
userspace about this.

Fixes: 48f45b094dbb ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Fixes: eab25b4f93aa ("power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize

commit 59a99cd462fbdf71f4e845e09f37783035088b4f upstream.

bq27xxx_external_power_changed() gets called when the charger is plugged
in or out. Rather then immediately scheduling an update wait 0.5 seconds
for things to stabilize, so that e.g. the (dis)charge current is stable
when bq27xxx_battery_update() runs.

Fixes: 740b755a3b34 ("bq27x00: Poll battery state")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes

commit 939a116142012926e25de0ea6b7e2f8d86a5f1b6 upstream.

On gauges where the current register is signed, there is no charging
flag in the flags register. So only checking flags will not result
in power_supply_changed() getting called when e.g. a charger is plugged
in and the current sign changes from negative (discharging) to
positive (charging).

This causes userspace's notion of the status to lag until userspace
does a poll.

And when a power_supply_leds.c LED trigger is used to indicate charging
status with a LED, this LED will lag until the capacity percentage
changes, which may take many minutes (because the LED trigger only is
updated on power_supply_changed() calls).

Fix this by calling bq27xxx_battery_current_and_status() on gauges with
a signed current register and checking if the status has changed.

Fixes: 297a533b3e62 ("bq27x00: Cache battery registers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq27xxx: Move bq27xxx_battery_update() down

commit ff4c4a2a4437a6d03787c7aafb2617f20c3ef45f upstream.

Move the bq27xxx_battery_update() functions to below
the bq27xxx_battery_current_and_status() function.

This is just moving a block of text, no functional changes.

This is a preparation patch for making bq27xxx_battery_update() check
the status and have it call power_supply_changed() on status changes.

Fixes: 297a533b3e62 ("bq27x00: Cache battery registers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()

commit 35092c5819f8c5acc7bafe3fdbb13d6307c4f5e1 upstream.

Add a cache parameter to bq27xxx_battery_current_and_status() so that
it can optionally use cached flags instead of re-reading them itself.

This is a preparation patch for making bq27xxx_battery_update() check
the status and have it call power_supply_changed() on status changes.

Fixes: 297a533b3e62 ("bq27x00: Cache battery registers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq27xxx: Fix poll_interval handling and races on remove

commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream.

Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0
to avoid bq27xxx_battery_update() requeuing the delayed_work item.

There are 2 problems with this:

1. If the driver is unbound through sysfs, rather then the module being
   rmmod-ed, this changes poll_interval unexpectedly

2. This is racy, after it being set poll_interval could be changed
   before bq27xxx_battery_update() checks it through
   /sys/module/bq27xxx_battery/parameters/poll_interval

Fix this by added a removed attribute to struct bq27xxx_device_info and
using that instead of setting poll_interval to 0.

There also is another poll_interval related race on remove(), writing
/sys/module/bq27xxx_battery/parameters/poll_interval will requeue
the delayed_work item for all devices on the bq27xxx_battery_devices
list and the device being removed was only removed from that list
after cancelling the delayed_work item.

Fix this by moving the removal from the bq27xxx_battery_devices list
to before cancelling the delayed_work item.

Fixes: 8cfaaa811894 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq27xxx: Fix I2C IRQ race on remove

commit 444ff00734f3878cd54ddd1ed5e2e6dbea9326d5 upstream.

devm_request_threaded_irq() requested IRQs are only free-ed after
the driver's remove function has ran. So the IRQ could trigger and
call bq27xxx_battery_update() after bq27xxx_battery_teardown() has
already run.

Switch to explicitly free-ing the IRQ in bq27xxx_battery_i2c_remove()
to fix this.

Fixes: 8807feb91b76 ("power: bq27xxx_battery: Add interrupt handling support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition

commit 5c34c0aef185dcd10881847b9ebf20046aa77cb4 upstream.

bq27xxx_battery_update() assumes / requires that it is only run once,
not multiple times at the same time. But there are 3 possible callers:

1. bq27xxx_battery_poll() delayed_work item handler
2. bq27xxx_battery_irq_handler_thread() I2C IRQ handler
3. bq27xxx_battery_setup()

And there is no protection against these racing with each other,
fix this race condition by making all callers take di->lock:

- Rename bq27xxx_battery_update() to bq27xxx_battery_update_unlocked()

- Add new bq27xxx_battery_update() which takes di->lock and then calls
  bq27xxx_battery_update_unlocked()

- Make stale cache check code in bq27xxx_battery_get_property(), which
  already takes di->lock directly to check the jiffies, call
  bq27xxx_battery_update_unlocked() instead of messing with
  the delayed_work item

- Make bq27xxx_battery_update_unlocked() mod the delayed-work item
  so that the next poll is delayed to poll_interval milliseconds after
  the last update independent of the source of the update

Fixes: 740b755a3b34 ("bq27x00: Poll battery state")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe

commit 4cbb0d358883a27e432714b5256f0362946f5e25 upstream.

devm_work_autocancel may fail, add a check and return early.

Fixes: 0402e8ebb8b86 ("power: supply: mt6360_charger: add MT6360 charger support")
Signed-off-by: Kang Chen <void0red@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: leds: Fix blink to LED on transition

commit e4484643991e0f6b89060092563f0dbab9450cbb upstream.

When a battery's status changes from charging to full then
the charging-blink-full-solid trigger tries to change
the LED from blinking to solid/on.

As is documented in include/linux/leds.h to deactivate blinking /
to make the LED solid a LED_OFF must be send:

"""
         * Deactivate blinking again when the brightness is set to LED_OFF
         * via the brightness_set() callback.
"""

led_set_brighness() calls with a brightness value other then 0 / LED_OFF
merely change the brightness of the LED in its on state while it is
blinking.

So power_supply_update_bat_leds() must first send a LED_OFF event
before the LED_FULL to disable blinking.

Fixes: 6501f728c56f ("power_supply: Add new LED trigger charging-blink-solid-full")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: mapchars mount option ignored

commit cb8b02fd6343228966324528adf920bfb8b8e681 upstream.

There are two ways that special characters (not allowed in some
other operating systems like Windows, but allowed in POSIX) have
been mapped in the past ("SFU" and "SFM" mappings) to allow them
to be stored in a range reserved for special chars. The default
for Linux has been to use "mapposix" (ie the SFM mapping) but
the conversion to the new mount API in the 5.11 kernel broke
the ability to override the default mapping of the reserved
characters (like '?' and '*' and '\') via "mapchars" mount option.

This patch fixes that - so can now mount with "mapchars"
mount option to override the default ("mapposix" ie SFM) mapping.

Reported-by: Tyler Spivey <tspivey8@gmail.com>
Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Fix out-of-bounds access in ipv6_find_tlv()

commit 878ecb0897f4737a4c9401f3523fd49589025671 upstream.

optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: c61a40432509 ("[IPV6]: Find option offset by type.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lan966x: Fix unloading/loading of the driver

commit 600761245952d7f70280add6ce02894f1528992b upstream.

It was noticing that after a while when unloading/loading the driver and
sending traffic through the switch, it would stop working. It would stop
forwarding any traffic and the only way to get out of this was to do a
power cycle of the board. The root cause seems to be that the switch
core is initialized twice. Apparently initializing twice the switch core
disturbs the pointers in the queue systems in the HW, so after a while
it would stop sending the traffic.
Unfortunetly, it is not possible to use a reset of the switch here,
because the reset line is connected to multiple devices like MDIO,
SGPIO, FAN, etc. So then all the devices will get reseted when the
network driver will be loaded.
So the fix is to check if the core is initialized already and if that is
the case don't initialize it again.

Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230522120038.3749026-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps

commit b34ffb0c6d23583830f9327864b9c1f486003305 upstream.

The LRU and LRU_PERCPU maps allocate a new element on update before locking the
target hash table bucket. Right after that the maps try to lock the bucket.
If this fails, then maps return -EBUSY to the caller without releasing the
allocated element. This makes the element untracked: it doesn't belong to
either of free lists, and it doesn't belong to the hash table, so can't be
re-used; this eventually leads to the permanent -ENOMEM on LRU map updates,
which is unexpected. Fix this by returning the element to the local free list
if bucket locking fails.

Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230522154558.2166815-1-aspsk@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields

commit 0613d8ca9ab382caabe9ed2dceb429e9781e443f upstream.

A narrow load from a 64-bit context field results in a 64-bit load
followed potentially by a 64-bit right-shift and then a bitwise AND
operation to extract the relevant data.

In the case of a 32-bit access, an immediate mask of 0xffffffff is used
to construct a 64-bit BPP_AND operation which then sign-extends the mask
value and effectively acts as a glorified no-op. For example:

0: 61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)

results in the following code generation for a 64-bit field:

ldr x7, [x7] // 64-bit load
mov x10, #0xffffffffffffffff
and x7, x7, x10

Fix the mask generation so that narrow loads always perform a 32-bit AND
operation:

ldr x7, [x7] // 64-bit load
mov w10, #0xffffffff
and w7, w7, w10

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Krzesimir Nowak <krzesimir@kinvolk.io>
Cc: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Fixes: 31fd85816dbe ("bpf: permits narrower load from bpf program context fields")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230518102528.1341-1-will@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeontx2-pf: Fix TSOv6 offload

commit de678ca38861f2eb58814048076dcf95ed1b5bf9 upstream.

HW adds segment size to the payload length
in the IPv6 header. Fix payload length to
just TCP header length instead of 'TCP header
size + IPv6 header size'.

Fixes: 86d7476078b8 ("octeontx2-pf: TCP segmentation offload support")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: fib_tests: mute cleanup error message

commit d226b1df361988f885c298737d6019c863a25f26 upstream.

In the end of the test, there will be an error message induced by the
`ip netns del ns1` command in cleanup()

  Tests passed: 201
  Tests failed:   0
  Cannot remove namespace file "/run/netns/ns1": No such file or directory

This can even be reproduced with just `./fib_tests.sh -h` as we're
calling cleanup() on exit.

Redirect the error message to /dev/null to mute it.

V2: Update commit message and fixes tag.
V3: resubmit due to missing netdev ML in V2

Fixes: b60417a9f2b8 ("selftest: fib_tests: Always cleanup before exit")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: fix drmm_mutex_init()

commit c21f11d182c2180d8b90eaff84f574cfa845b250 upstream.

In mutex_init() lockdep identifies a lock by defining a special static
key for each lock class. However if we wrap the macro in a function,
like in drmm_mutex_init(), we end up generating:

int drmm_mutex_init(struct drm_device *dev, struct mutex *lock)
{
      static struct lock_class_key __key;

      __mutex_init((lock), "lock", &__key);
      ....
}

The static __key here is what lockdep uses to identify the lock class,
however since this is just a normal function the key here will be
created once, where all callers then use the same key. In effect the
mutex->depmap.key will be the same pointer for different
drmm_mutex_init() callers. This then results in impossible lockdep
splats since lockdep thinks completely unrelated locks are the same lock
class.

To fix this turn drmm_mutex_init() into a macro such that it generates a
different "static struct lock_class_key __key" for each invocation,
which looks to be inline with what mutex_init() wants.

v2:
  - Revamp the commit message with clearer explanation of the issue.
  - Rather export __drmm_mutex_release() than static inline.

Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reported-by: Sarah Walker <sarah.walker@imgtec.com>
Fixes: e13f13e039dc ("drm: Add DRM-managed mutex_init()")
Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519090733.489019-1-matthew.auld@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix skb leak in __skb_tstamp_tx()

commit 8a02fb71d7192ff1a9a47c9d937624966c6e09af upstream.

Commit 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with
TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with
zerocopy skbs. But it ended up adding a leak of its own. When
skb_orphan_frags_rx() fails, the function just returns, leaking the skb
it just cloned. Free it before returning.

This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.

Fixes: 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.")
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230522153020.32422-1-ptyadav@amazon.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: lpass: Fix for KASAN use_after_free out of bounds

commit 75e5fab7db0cecb6e16b22c34608f0b40a4c7cd1 upstream.

When we run syzkaller we get below Out of Bounds error.

"KASAN: slab-out-of-bounds Read in regcache_flat_read"

Below is the backtrace of the issue:

BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110
Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144
CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G        W
Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT)
Call trace:
dump_backtrace+0x0/0x4ec
show_stack+0x34/0x50
dump_stack_lvl+0xdc/0x11c
print_address_description+0x30/0x2d8
kasan_report+0x178/0x1e4
__asan_report_load4_noabort+0x44/0x50
regcache_flat_read+0x10c/0x110
regcache_read+0xf8/0x5a0
_regmap_read+0x45c/0x86c
_regmap_update_bits+0x128/0x290
regmap_update_bits_base+0xc0/0x15c
snd_soc_component_update_bits+0xa8/0x22c
snd_soc_component_write_field+0x68/0xd4
tx_macro_put_dec_enum+0x1d0/0x268
snd_ctl_elem_write+0x288/0x474

By Error checking and checking valid values issue gets rectifies.

Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com
Link: https://lore.kernel.org/r/20230511112532.16106-1-quic_visr@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: radio-shark: Add endpoint checks

commit 76e31045ba030e94e72105c01b2e98f543d175ac upstream.

The syzbot fuzzer was able to provoke a WARNING from the radio-shark2
driver:

------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 0 PID: 3271 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed2/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 3271 Comm: kworker/0:3 Not tainted 6.1.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed2/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 00 36 ea fb 48 8b 7c 24 18 e8 36 1c 02 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 b6 90 8a e8 9a 29 b8 03 <0f> 0b e9 58 f8 ff ff e8 d2 35 ea fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc90003876dd0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: ffff8880750b0040 RSI: ffffffff816152b8 RDI: fffff5200070edac
RBP: ffff8880172d81e0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffff8880285c5040 R14: 0000000000000002 R15: ffff888017158200
FS:  0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe03235b90 CR3: 000000000bc8e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
 usb_bulk_msg+0x226/0x550 drivers/usb/core/message.c:387
 shark_write_reg+0x1ff/0x2e0 drivers/media/radio/radio-shark2.c:88
...

The problem was caused by the fact that the driver does not check
whether the endpoints it uses are actually present and have the
appropriate types.  This can be fixed by adding a simple check of
these endpoints (and similarly for the radio-shark driver).

Link: https://syzkaller.appspot.com/bug?extid=4b3f8190f6e13b3efd74
Reported-and-tested-by: syzbot+4b3f8190f6e13b3efd74@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/e2858ab4-4adf-46e5-bbf6-c56742034547@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: sisusbvga: Add endpoint checks

commit df05a9b05e466a46725564528b277d0c570d0104 upstream.

The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver:

------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95
RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003
R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600
FS:  0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline]
 sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379
 sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline]
 sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline]
 sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177
 sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869
...

The problem was caused by the fact that the driver does not check
whether the endpoints it uses are actually present and have the
appropriate types.  This can be fixed by adding a simple check of
the endpoints.

Link: https://syzkaller.appspot.com/bug?extid=23be03b56c5259385d79
Reported-and-tested-by: syzbot+23be03b56c5259385d79@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/48ef98f7-51ae-4f63-b8d3-0ef2004bb60a@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Add routines for endpoint checks in old drivers

commit 13890626501ffda22b18213ddaf7930473da5792 upstream.

Many of the older USB drivers in the Linux USB stack were written
based simply on a vendor's device specification.  They use the
endpoint information in the spec and assume these endpoints will
always be present, with the properties listed, in any device matching
the given vendor and product IDs.

While that may have been true back then, with spoofing and fuzzing it
is not true any more.  More and more we are finding that those old
drivers need to perform at least a minimum of checking before they try
to use any endpoint other than ep0.

To make this checking as simple as possible, we now add a couple of
utility routines to the USB core.  usb_check_bulk_endpoints() and
usb_check_int_endpoints() take an interface pointer together with a
list of endpoint addresses (numbers and directions).  They check that
the interface's current alternate setting includes endpoints with
those addresses and that each of these endpoints has the right type:
bulk or interrupt, respectively.

Although we already have usb_find_common_endpoints() and related
routines meant for a similar purpose, they are not well suited for
this kind of checking.  Those routines find endpoints of various
kinds, but only one (either the first or the last) of each kind, and
they don't verify that the endpoints' addresses agree with what the
caller expects.

In theory the new routines could be more general: They could take a
particular altsetting as their argument instead of always using the
interface's current altsetting.  In practice I think this won't matter
too much; multiple altsettings tend to be used for transferring media
(audio or visual) over isochronous endpoints, not bulk or interrupt.
Drivers for such devices will generally require more sophisticated
checking than these simplistic routines provide.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().

commit ad42a35bdfc6d3c0fc4cb4027d7b2757ce665665 upstream.

syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using
IPPROTO_UDPLITE (0x88):

  14:25:52 executing program 1:
  r0 = socket$inet6(0xa, 0x80002, 0x88)

We had a similar report [1] for probably sk_memory_allocated_add()
in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix
NULL pointer dereference") fixed it by setting .memory_allocated for
udplite_prot and udplitev6_prot.

To fix the variant, we need to set either .sysctl_wmem_offset or
.sysctl_rmem.

Now UDP and UDPLITE share the same value for .memory_allocated, so we
use the same .sysctl_wmem_offset for UDP and UDPLITE.

[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023
RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline]
RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006
Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b
RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000
RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8
RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000
R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0
Call Trace:
 <TASK>
 __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077
 udp_rmem_schedule net/ipv4/udp.c:1539 [inline]
 __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581
 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline]
 udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775
 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793
 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline]
 __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013
 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437
 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482
 NF_HOOK include/linux/netfilter.h:303 [inline]
 NF_HOOK include/linux/netfilter.h:297 [inline]
 ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491
 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585
 dst_input include/net/dst.h:468 [inline]
 ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
 NF_HOOK include/linux/netfilter.h:303 [inline]
 NF_HOOK include/linux/netfilter.h:297 [inline]
 ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309
 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491
 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605
 netif_receive_skb_internal net/core/dev.c:5691 [inline]
 netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750
 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553
 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989
 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035
 call_write_iter include/linux/fs.h:1868 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x945/0xd50 fs/read_write.c:584
 ksys_write+0x12b/0x250 fs/read_write.c:637
 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
 __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
 entry_SYSENTER_compat_after_hwframe+0x70/0x82
RIP: 0023:0xf7f21579
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004
RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040
RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>
Modules linked in:

Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/
Fixes: 850cbaddb52d ("udp: use it's own memory accounting schema")
Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix stack overflow when LRO is disabled for virtual interfaces

commit ae9b15fbe63447bc1d3bba3769f409d17ca6fdf6 upstream.

When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.

       team0
         |
  +------+------+-----+-----+
  |      |      |     |     |
team1  team2  team3  ...  team200

If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.

But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.

Reproducer:

ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
        ip link add team$i master team0 type team
        ethtool -K team$i lro on
done

ethtool -K team0 lro off

In order to fix it, the notifier_ctx member of bonding/team is introduced.

Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: udlfb: Fix endpoint check

commit ed9de4ed39875706607fb08118a58344ae6c5f42 upstream.

The syzbot fuzzer detected a problem in the udlfb driver, caused by an
endpoint not having the expected type:

usb 1-1: Read EDID byte 0 failed: -71
usb 1-1: Unable to get valid EDID from device/display
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880
drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted
6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
04/28/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
 <TASK>
 dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980
 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111
 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743

The current approach for this issue failed to catch the problem
because it only checks for the existence of a bulk-OUT endpoint; it
doesn't check whether this endpoint is the one that the driver will
actually use.

We can fix the problem by instead checking that the endpoint used by
the driver does exist and is bulk-OUT.

Reported-and-tested-by: syzbot+0e22d63dcebb802b9bc8@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Pavel Skripkin <paskripkin@gmail.com>
Fixes: aaf7dbe07385 ("video: fbdev: udlfb: properly check endpoint type")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

debugobjects: Don't wake up kswapd from fill_pool()

commit eb799279fb1f9c63c520fe8c1c41cb9154252db6 upstream.

syzbot is reporting a lockdep warning in fill_pool() because the allocation
from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM)
and therefore tries to wake up kswapd, which acquires kswapd_wait::lock.

Since fill_pool() might be called with arbitrary locks held, fill_pool()
should not assume that acquiring kswapd_wait::lock is safe.

Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for
!__GFP_DIRECT_RECLAIM allocation.

Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects")
Reported-by: syzbot <syzbot+fe0c72f0ccbb93786380@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/6577e1fa-b6ee-f2be-2414-a2b51b1c5e30@I-love.SAKURA.ne.jp
Closes: https://syzkaller.appspot.com/bug?extid=fe0c72f0ccbb93786380
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/mips-gic: Use raw spinlock for gic_lock

commit 3d6a0e4197c04599d75d85a608c8bb16a630a38c upstream.

Since we may hold gic_lock in hardirq context, use raw spinlock
makes more sense given that it is for low-level interrupt handling
routine and the critical section is small.

Fixes BUG:

[    0.426106] =============================
[    0.426257] [ BUG: Invalid wait context ]
[    0.426422] 6.3.0-rc7-next-20230421-dirty #54 Not tainted
[    0.426638] -----------------------------
[    0.426766] swapper/0/1 is trying to lock:
[    0.426954] ffffffff8104e7b8 (gic_lock){....}-{3:3}, at: gic_set_type+0x30/08

Fixes: 95150ae8b330 ("irqchip: mips-gic: Implement irq_set_type callback")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230424103156.66753-3-jiaxun.yang@flygoat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/mips-gic: Don't touch vl_map if a local interrupt is not routable

commit 2c6c9c049510163090b979ea5f92a68ae8d93c45 upstream.

When a GIC local interrupt is not routable, it's vl_map will be used
to control some internal states for core (providing IPTI, IPPCI, IPFDC
input signal for core). Overriding it will interfere core's intetrupt
controller.

Do not touch vl_map if a local interrupt is not routable, we are not
going to remap it.

Before dd098a0e0319 (" irqchip/mips-gic: Get rid of the reliance on
irq_cpu_online()"), if a local interrupt is not routable, then it won't
be requested from GIC Local domain, and thus gic_all_vpes_irq_cpu_online
won't be called for that particular interrupt.

Fixes: dd098a0e0319 (" irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230424103156.66753-2-jiaxun.yang@flygoat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms

commit edc0a2b5957652f4685ef3516f519f84807087db upstream.

Traditionally, all CPUs in a system have identical numbers of SMT
siblings.  That changes with hybrid processors where some logical CPUs
have a sibling and others have none.

Today, the CPU boot code sets the global variable smp_num_siblings when
every CPU thread is brought up. The last thread to boot will overwrite
it with the number of siblings of *that* thread. That last thread to
boot will "win". If the thread is a Pcore, smp_num_siblings == 2.  If it
is an Ecore, smp_num_siblings == 1.

smp_num_siblings describes if the *system* supports SMT.  It should
specify the maximum number of SMT threads among all cores.

Ensure that smp_num_siblings represents the system-wide maximum number
of siblings by always increasing its value. Never allow it to decrease.

On MeteorLake-P platform, this fixes a problem that the Ecore CPUs are
not updated in any cpu sibling map because the system is treated as an
UP system when probing Ecore CPUs.

Below shows part of the CPU topology information before and after the
fix, for both Pcore and Ecore CPU (cpu0 is Pcore, cpu 12 is Ecore).
...
-/sys/devices/system/cpu/cpu0/topology/package_cpus:000fff
-/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-11
+/sys/devices/system/cpu/cpu0/topology/package_cpus:3fffff
+/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-21
...
-/sys/devices/system/cpu/cpu12/topology/package_cpus:001000
-/sys/devices/system/cpu/cpu12/topology/package_cpus_list:12
+/sys/devices/system/cpu/cpu12/topology/package_cpus:3fffff
+/sys/devices/system/cpu/cpu12/topology/package_cpus_list:0-21

Notice that the "before" 'package_cpus_list' has only one CPU.  This
means that userspace tools like lscpu will see a little laptop like
an 11-socket system:

-Core(s) per socket:  1
-Socket(s):           11
+Core(s) per socket:  16
+Socket(s):           1

This is also expected to make the scheduler do rather wonky things
too.

[ dhansen: remove CPUID detail from changelog, add end user effects ]

CC: stable@kernel.org
Fixes: bbb65d2d365e ("x86: use cpuid vector 0xb when available for detecting cpu topology")
Fixes: 95f3d39ccf7a ("x86/cpu/topology: Provide detect_extended_topology_early()")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20230323015640.27906-1-rui.zhang%40intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/uncore: Correct the number of CHAs on SPR

commit 38776cc45eb7603df4735a0410f42cffff8e71a1 upstream.

The number of CHAs from the discovery table on some SPR variants is
incorrect, because of a firmware issue. An accurate number can be read
from the MSR UNC_CBO_CONFIG.

Fixes: 949b11381f81 ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230508140206.283708-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/amdgpu: limit one queue per gang

commit 5ee33d905f89c18d4b33da6e5eefdae6060502df upstream.

Limit one queue per gang in mes self test,
due to mes schq fw change.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/memfd: Fix unknown type name build failure

Partially backport v6.3 commit 11f75a01448f ("selftests/memfd: add tests
for MFD_NOEXEC_SEAL MFD_EXEC") to fix an unknown type name build error.
In some systems, the __u64 typedef is not present due to differences in
system headers, causing compilation errors like this one:

fuse_test.c:64:8: error: unknown type name '__u64'
   64 | static __u64 mfd_assert_get_seals(int fd)

This header includes the  __u64 typedef which increases the likelihood
of successful compilation on a wider variety of systems.

Signed-off-by: Hardik Garg <hargar@linux.microsoft.com>
Reviewed-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix UAF of alloc->vma in race with munmap()

commit d1d8875c8c13517f6fd1ff8d4d3e1ac366a17e07 upstream.

[ cmllamas: clean forward port from commit 015ac18be7de ("binder: fix
  UAF of alloc->vma in race with munmap()") in 5.10 stable. It is needed
  in mainline after the revert of commit a43cfc87caaf ("android: binder:
  stop saving a pointer to the VMA") as pointed out by Liam. The commit
  log and tags have been tweaked to reflect this. ]

In commit 720c24192404 ("ANDROID: binder: change down_write to
down_read") binder assumed the mmap read lock is sufficient to protect
alloc->vma inside binder_update_page_range(). This used to be accurate
until commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in
munmap"), which now downgrades the mmap_lock after detaching the vma
from the rbtree in munmap(). Then it proceeds to teardown and free the
vma with only the read lock held.

This means that accesses to alloc->vma in binder_update_page_range() now
will race with vm_area_free() in munmap() and can cause a UAF as shown
in the following KASAN trace:

  ==================================================================
  BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0
  Read of size 8 at addr ffff16204ad00600 by task server/558

  CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1
  Hardware name: linux,dummy-virt (DT)
  Call trace:
   dump_backtrace+0x0/0x2a0
   show_stack+0x18/0x2c
   dump_stack+0xf8/0x164
   print_address_description.constprop.0+0x9c/0x538
   kasan_report+0x120/0x200
   __asan_load8+0xa0/0xc4
   vm_insert_page+0x7c/0x1f0
   binder_update_page_range+0x278/0x50c
   binder_alloc_new_buf+0x3f0/0xba0
   binder_transaction+0x64c/0x3040
   binder_thread_write+0x924/0x2020
   binder_ioctl+0x1610/0x2e5c
   __arm64_sys_ioctl+0xd4/0x120
   el0_svc_common.constprop.0+0xac/0x270
   do_el0_svc+0x38/0xa0
   el0_svc+0x1c/0x2c
   el0_sync_handler+0xe8/0x114
   el0_sync+0x180/0x1c0

  Allocated by task 559:
   kasan_save_stack+0x38/0x6c
   __kasan_kmalloc.constprop.0+0xe4/0xf0
   kasan_slab_alloc+0x18/0x2c
   kmem_cache_alloc+0x1b0/0x2d0
   vm_area_alloc+0x28/0x94
   mmap_region+0x378/0x920
   do_mmap+0x3f0/0x600
   vm_mmap_pgoff+0x150/0x17c
   ksys_mmap_pgoff+0x284/0x2dc
   __arm64_sys_mmap+0x84/0xa4
   el0_svc_common.constprop.0+0xac/0x270
   do_el0_svc+0x38/0xa0
   el0_svc+0x1c/0x2c
   el0_sync_handler+0xe8/0x114
   el0_sync+0x180/0x1c0

  Freed by task 560:
   kasan_save_stack+0x38/0x6c
   kasan_set_track+0x28/0x40
   kasan_set_free_info+0x24/0x4c
   __kasan_slab_free+0x100/0x164
   kasan_slab_free+0x14/0x20
   kmem_cache_free+0xc4/0x34c
   vm_area_free+0x1c/0x2c
   remove_vma+0x7c/0x94
   __do_munmap+0x358/0x710
   __vm_munmap+0xbc/0x130
   __arm64_sys_munmap+0x4c/0x64
   el0_svc_common.constprop.0+0xac/0x270
   do_el0_svc+0x38/0xa0
   el0_svc+0x1c/0x2c
   el0_sync_handler+0xe8/0x114
   el0_sync+0x180/0x1c0

  [...]
  ==================================================================

To prevent the race above, revert back to taking the mmap write lock
inside binder_update_page_range(). One might expect an increase of mmap
lock contention. However, binder already serializes these calls via top
level alloc->mutex. Also, there was no performance impact shown when
running the binder benchmark tests.

Fixes: c0fd2101781e ("Revert "android: binder: stop saving a pointer to the VMA"")
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/all/20230518144052.xkj6vmddccq4v66b@revolver
Cc: <stable@vger.kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20230519195950.1775656-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix UAF caused by faulty buffer cleanup

commit bdc1c5fac982845a58d28690cdb56db8c88a530d upstream.

In binder_transaction_buffer_release() the 'failed_at' offset indicates
the number of objects to clean up. However, this function was changed by
commit 44d8047f1d87 ("binder: use standard functions to allocate fds"),
to release all the objects in the buffer when 'failed_at' is zero.

This introduced an issue when a transaction buffer is released without
any objects having been processed so far. In this case, 'failed_at' is
indeed zero yet it is misinterpreted as releasing the entire buffer.

This leads to use-after-free errors where nodes are incorrectly freed
and subsequently accessed. Such is the case in the following KASAN
report:

  ==================================================================
  BUG: KASAN: slab-use-after-free in binder_thread_read+0xc40/0x1f30
  Read of size 8 at addr ffff4faf037cfc58 by task poc/474

  CPU: 6 PID: 474 Comm: poc Not tainted 6.3.0-12570-g7df047b3f0aa #5
  Hardware name: linux,dummy-virt (DT)
  Call trace:
   dump_backtrace+0x94/0xec
   show_stack+0x18/0x24
   dump_stack_lvl+0x48/0x60
   print_report+0xf8/0x5b8
   kasan_report+0xb8/0xfc
   __asan_load8+0x9c/0xb8
   binder_thread_read+0xc40/0x1f30
   binder_ioctl+0xd9c/0x1768
   __arm64_sys_ioctl+0xd4/0x118
   invoke_syscall+0x60/0x188
  [...]

  Allocated by task 474:
   kasan_save_stack+0x3c/0x64
   kasan_set_track+0x2c/0x40
   kasan_save_alloc_info+0x24/0x34
   __kasan_kmalloc+0xb8/0xbc
   kmalloc_trace+0x48/0x5c
   binder_new_node+0x3c/0x3a4
   binder_transaction+0x2b58/0x36f0
   binder_thread_write+0x8e0/0x1b78
   binder_ioctl+0x14a0/0x1768
   __arm64_sys_ioctl+0xd4/0x118
   invoke_syscall+0x60/0x188
  [...]

  Freed by task 475:
   kasan_save_stack+0x3c/0x64
   kasan_set_track+0x2c/0x40
   kasan_save_free_info+0x38/0x5c
   __kasan_slab_free+0xe8/0x154
   __kmem_cache_free+0x128/0x2bc
   kfree+0x58/0x70
   binder_dec_node_tmpref+0x178/0x1fc
   binder_transaction_buffer_release+0x430/0x628
   binder_transaction+0x1954/0x36f0
   binder_thread_write+0x8e0/0x1b78
   binder_ioctl+0x14a0/0x1768
   __arm64_sys_ioctl+0xd4/0x118
   invoke_syscall+0x60/0x188
  [...]
  ==================================================================

In order to avoid these issues, let's always calculate the intended
'failed_at' offset beforehand. This is renamed and wrapped in a helper
function to make it clear and convenient.

Fixes: 32e9f56a96d8 ("binder: don't detect sender/target during buffer cleanup")
Reported-by: Zi Fan Tan <zifantan@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20230505203020.4101154-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: add lockless binder_alloc_(set|get)_vma()

commit 0fa53349c3acba0239369ba4cd133740a408d246 upstream.

Bring back the original lockless design in binder_alloc to determine
whether the buffer setup has been completed by the ->mmap() handler.
However, this time use smp_load_acquire() and smp_store_release() to
wrap all the ordering in a single macro call.

Also, add comments to make it evident that binder uses alloc->vma to
determine when the binder_alloc has been fully initialized. In these
scenarios acquiring the mmap_lock is not required.

Fixes: a43cfc87caaf ("android: binder: stop saving a pointer to the VMA")
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20230502201220.1756319-3-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "android: binder: stop saving a pointer to the VMA"

commit c0fd2101781ef761b636769b2f445351f71c3626 upstream.

This reverts commit a43cfc87caaf46710c8027a8c23b8a55f1078f19.

This patch fixed an issue reported by syzkaller in [1]. However, this
turned out to be only a band-aid in binder. The root cause, as bisected
by syzkaller, was fixed by commit 5789151e48ac ("mm/mmap: undo ->mmap()
when mas_preallocate() fails"). We no longer need the patch for binder.

Reverting such patch allows us to have a lockless access to alloc->vma
in specific cases where the mmap_lock is not required. This approach
avoids the contention that caused a performance regression.

[1] https://lore.kernel.org/all/0000000000004a0dbe05e1d749e0@google.com

[cmllamas: resolved conflicts with rework of alloc->mm and removal of
 binder_alloc_set_vma() also fixed comment section]

Fixes: a43cfc87caaf ("android: binder: stop saving a pointer to the VMA")
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20230502201220.1756319-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "binder_alloc: add missing mmap_lock calls when using the VMA"

commit b15655b12ddca7ade09807f790bafb6fab61b50a upstream.

This reverts commit 44e602b4e52f70f04620bbbf4fe46ecb40170bde.

This caused a performance regression particularly when pages are getting
reclaimed. We don't need to acquire the mmap_lock to determine when the
binder buffer has been fully initialized. A subsequent patch will bring
back the lockless approach for this.

[cmllamas: resolved trivial conflicts with renaming of alloc->mm]

Fixes: 44e602b4e52f ("binder_alloc: add missing mmap_lock calls when using the VMA")
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20230502201220.1756319-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: Fix output of pp_od_clk_voltage

commit 40baba5693b9af586dc1063af603d05a79e57a6b upstream.

Printing the other clock types should not be conditioned on being able
to print OD_SCLK. Some GPUs currently have limited capability of only
printing a subset of these.

Since this condition was introduced in v5.18-rc1, reading from
`pp_od_clk_voltage` has been returning empty on the Asus ROG Strix G15
(2021).

Fixes: 79c65f3fcbb1 ("drm/amd/pm: do not expose power implementation details to amdgpu_pm.c")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jonatas Esteves <jntesteves@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: add missing NotifyPowerSource message mapping for SMU13.0.7

commit 0d2dd02d74e6377268f56b90261de0fae8f0d2cb upstream.

Otherwise, the power source switching will fail due to message
unavailable.

Fixes: bf4823267a81 ("drm/amd/pm: fix possible power mode mismatch between driver and PMFW")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: reintroduce radeon_dp_work_func content

commit a34fc1bcd2c4d8b09dcfc0b95ac65bca1e579bd7 upstream.

Put back the radeon_dp_work_func logic.  It seems that
handling DP RX interrupts is necessary to make some
panels work.  This was removed with the MST support,
but it regresses some systems so add it back.  While
we are here, add the proper mutex locking.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2567
Fixes: 01ad1d9c2888 ("drm/radeon: Drop legacy MST support")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mgag200: Fix gamma lut not initialized.

commit ad81e23426a651eb89a4b306e1c4169e6308c124 upstream.

When mgag200 switched from simple KMS to regular atomic helpers,
the initialization of the gamma settings was lost.
This leads to a black screen, if the bios/uefi doesn't use the same
pixel color depth.

v2: rebase on top of drm-misc-fixes, and add Cc stable tag.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2171155
Fixes: 1baf9127c482 ("drm/mgag200: Replace simple-KMS with regular atomic helpers")
Cc: <stable@vger.kernel.org>
Tested-by: Phil Oester <kernel@linuxace.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510131034.284078-1-jfalempe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type

commit 50a1726b148ff30778cb8a6cf3736130b07c93fd upstream.

In cdns3-gadget.c, 'cdns,on-chip-buff-size' was read using
device_property_read_u16(). It resulted in 0 if a 32bit value was used
in dts. This commit fixes the dt binding doc to declare it as u16.

Cc: stable@vger.kernel.org
Fixes: 68989fe1c39d ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: use nofs when cleaning up aborted transactions

commit 597441b3436a43011f31ce71dc0a6c0bf5ce958a upstream.

Our CI system caught a lockdep splat:

  ======================================================
  WARNING: possible circular locking dependency detected
  6.3.0-rc7+ #1167 Not tainted
  ------------------------------------------------------
  kswapd0/46 is trying to acquire lock:
  ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120

  but task is already holding lock:
  ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (fs_reclaim){+.+.}-{0:0}:
 fs_reclaim_acquire+0xa5/0xe0
 kmem_cache_alloc+0x31/0x2c0
 alloc_extent_state+0x1d/0xd0
 __clear_extent_bit+0x2e0/0x4f0
 try_release_extent_mapping+0x216/0x280
 btrfs_release_folio+0x2e/0x90
 invalidate_inode_pages2_range+0x397/0x470
 btrfs_cleanup_dirty_bgs+0x9e/0x210
 btrfs_cleanup_one_transaction+0x22/0x760
 btrfs_commit_transaction+0x3b7/0x13a0
 create_subvol+0x59b/0x970
 btrfs_mksubvol+0x435/0x4f0
 __btrfs_ioctl_snap_create+0x11e/0x1b0
 btrfs_ioctl_snap_create_v2+0xbf/0x140
 btrfs_ioctl+0xa45/0x28f0
 __x64_sys_ioctl+0x88/0xc0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

  -> #0 (sb_internal#2){++++}-{0:0}:
 __lock_acquire+0x1435/0x21a0
 lock_acquire+0xc2/0x2b0
 start_transaction+0x401/0x730
 btrfs_commit_inode_delayed_inode+0x5f/0x120
 btrfs_evict_inode+0x292/0x3d0
 evict+0xcc/0x1d0
 inode_lru_isolate+0x14d/0x1e0
 __list_lru_walk_one+0xbe/0x1c0
 list_lru_walk_one+0x58/0x80
 prune_icache_sb+0x39/0x60
 super_cache_scan+0x161/0x1f0
 do_shrink_slab+0x163/0x340
 shrink_slab+0x1d3/0x290
 shrink_node+0x300/0x720
 balance_pgdat+0x35c/0x7a0
 kswapd+0x205/0x410
 kthread+0xf0/0x120
 ret_from_fork+0x29/0x50

  other info that might help us debug this:

   Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
    lock(fs_reclaim);
 lock(sb_internal#2);
 lock(fs_reclaim);
    lock(sb_internal#2);

   *** DEADLOCK ***

  3 locks held by kswapd0/46:
   #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0
   #1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290
   #2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0

  stack backtrace:
  CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x58/0x90
   check_noncircular+0xd6/0x100
   ? save_trace+0x3f/0x310
   ? add_lock_to_list+0x97/0x120
   __lock_acquire+0x1435/0x21a0
   lock_acquire+0xc2/0x2b0
   ? btrfs_commit_inode_delayed_inode+0x5f/0x120
   start_transaction+0x401/0x730
   ? btrfs_commit_inode_delayed_inode+0x5f/0x120
   btrfs_commit_inode_delayed_inode+0x5f/0x120
   btrfs_evict_inode+0x292/0x3d0
   ? lock_release+0x134/0x270
   ? __pfx_wake_bit_function+0x10/0x10
   evict+0xcc/0x1d0
   inode_lru_isolate+0x14d/0x1e0
   __list_lru_walk_one+0xbe/0x1c0
   ? __pfx_inode_lru_isolate+0x10/0x10
   ? __pfx_inode_lru_isolate+0x10/0x10
   list_lru_walk_one+0x58/0x80
   prune_icache_sb+0x39/0x60
   super_cache_scan+0x161/0x1f0
   do_shrink_slab+0x163/0x340
   shrink_slab+0x1d3/0x290
   shrink_node+0x300/0x720
   balance_pgdat+0x35c/0x7a0
   kswapd+0x205/0x410
   ? __pfx_autoremove_wake_function+0x10/0x10
   ? __pfx_kswapd+0x10/0x10
   kthread+0xf0/0x120
   ? __pfx_kthread+0x10/0x10
   ret_from_fork+0x29/0x50
   </TASK>

This happens because when we abort the transaction in the transaction
commit path we call invalidate_inode_pages2_range on our block group
cache inodes (if we have space cache v1) and any delalloc inodes we may
have.  The plain invalidate_inode_pages2_range() call passes through
GFP_KERNEL, which makes sense in most cases, but not here.  Wrap these
two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to
make sure we don't end up with the fs reclaim dependency under the
transaction dependency.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: mockup: Fix mode of debugfs files

commit 0a1bb16e0fe6650c3841e611de374bfd5578ad70 upstream.

This driver's debugfs files have had a read operation since commit
2a9e27408e12 ("gpio: mockup: rework debugfs interface"), but were
still being created with write-only mode bits.  Update them to
indicate that the files can also be read.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 2a9e27408e12 ("gpio: mockup: rework debugfs interface")
Cc: stable@kernel.org # v5.1+
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Handle kprobes breakpoints only in kernel context

commit df419492e428b6a2bce98d0f613c58a13da6666c upstream.

The kernel kprobes break instructions should only be handled when running
in kernel context.

Cc: <stable@vger.kernel.org> # v5.18+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Enable LOCKDEP support

commit adf8e96a7ea670d45b5de7594acc67e8f4787ae6 upstream.

Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Allow to reboot machine after system halt

commit 2028315cf59bb899a5ac7e87dc48ecb8fac7ac24 upstream.

In case a machine can't power-off itself on system shutdown,
allow the user to reboot it by pressing the RETURN key.

Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix flush_dcache_page() for usage from irq context

commit 61e150fb310729c98227a5edf6e4a3619edc3702 upstream.

Since at least kernel 6.1, flush_dcache_page() is called with IRQs
disabled, e.g. from aio_complete().

But the current implementation for flush_dcache_page() on parisc
unintentionally re-enables IRQs, which may lead to deadlocks.

Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore()
for the flush_dcache_mmap_*lock() macros instead.

Cc: linux-parisc@vger.kernel.org
Cc: stable@kernel.org # 5.18+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Handle kgdb breakpoints only in kernel context

commit 6888ff04e37d01295620a73f3f7efbc79f6ef152 upstream.

The kernel kgdb break instructions should only be handled when running
in kernel context.

Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Use num_present_cpus() in alternative patching code

commit b6405f0829d7b1dd926ba3ca5f691cab835abfaa upstream.

When patching the kernel code some alternatives depend on SMP vs. !SMP.
Use the value of num_present_cpus() instead of num_online_cpus() to
decide, otherwise we may run into issues if and additional CPU is
enabled after having loaded a module while only one CPU was enabled.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: add __bswap{si,di}2 helpers

commit 034f4a7877c32a8efd6beee4d71ed14e424499a9 upstream.

gcc-13 may generate calls for __bswap{si,di}2. This breaks the kernel
build when optimization for size is selected. Add __bswap{si,di}2
helpers to fix that.

Cc: stable@vger.kernel.org
Fixes: 19c5699f9aff ("xtensa: don't link with libgcc")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix signal delivery to FDPIC process

commit 9c2cc74fb31ec76b8b118c97041a6a154a3ff219 upstream.

Fetch function descriptor pointed to by the signal handler pointer from
userspace on signal delivery and function pointer pointed to by the
sa_restorer on return from the signal handler.

Cc: stable@vger.kernel.org
Fixes: e3ddb8bbe0f8 ("xtensa: add FDPIC and static PIE support for noMMU")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m68k: Move signal frame following exception on 68020/030

commit b845b574f86dcb6a70dfa698aa87a237b0878d2a upstream.

On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause
a stack page fault during instruction execution (i.e. not at an
instruction boundary) and produce a format 0xB exception frame.

In this situation, the value of USP will be unreliable.  If a signal is
to be delivered following the exception, this USP value is used to
calculate the location for a signal frame.  This can result in a
corrupted user stack.

The corruption was detected in dash (actually in glibc) where it showed
up as an intermittent "stack smashing detected" message and crash
following signal delivery for SIGCHLD.

It was hard to reproduce that failure because delivery of the signal
raced with the page fault and because the kernel places an unpredictable
gap of up to 7 bytes between the USP and the signal frame.

A format 0xB exception frame can be produced by a bus error or an
address error.  The 68030 Users Manual says that address errors occur
immediately upon detection during instruction prefetch.  The instruction
pipeline allows prefetch to overlap with other instructions, which means
an address error can arise during the execution of a different
instruction.  So it seems likely that this patch may help in the address
error case also.

Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Link: https://lore.kernel.org/all/CAMuHMdW3yD22_ApemzW_6me3adq6A458u1_F0v-1EYwK_62jPA@mail.gmail.com/
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: stable@vger.kernel.org
Co-developed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/9e66262a754fcba50208aa424188896cc52a1dd1.1683365892.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize

commit 7e01c7f7046efc2c7c192c3619db43292b98e997 upstream.

Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than
the calculated "min" value, but greater than zero, the logic sets
tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in
cdc_ncm_fill_tx_frame() where all the data is handled.

For small values of dwNtbOutMaxSize the memory allocated during
alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to
how size is aligned at alloc time:
size = SKB_DATA_ALIGN(size);
        size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
Thus we hit the same bug that we tried to squash with
commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")

Low values of dwNtbOutMaxSize do not cause an issue presently because at
alloc_skb() time more memory (512b) is allocated than required for the
SKB headers alone (320b), leaving some space (512b - 320b = 192b)
for CDC data (172b).

However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).

Consequently the SKB bounds checking semantics fails and panics:

skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:113!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic net/core/skbuff.c:113 [inline]
RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118
[snip]
Call Trace:
 <TASK>
 skb_put+0x151/0x210 net/core/skbuff.c:2047
 skb_put_zero include/linux/skbuff.h:2422 [inline]
 cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline]
 cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308
 cdc_ncm_tx_fixup+0xa3/0x100

Deal with too low values of dwNtbOutMaxSize, clamp it in the range
[USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure
enough data space is allocated to handle CDC data by making sure
dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.

Fixes: 289507d3364f ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Cc: stable@vger.kernel.org
Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d
Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5682: Disable jack detection interrupt during suspend

commit 8b271370e963370703819bd9795a54d658071bed upstream.

The rt5682 driver switches its regmap to cache-only when the
device suspends and back to regular mode on resume. When the
jack detect interrupt fires rt5682_irq() schedules the jack
detect work. This can result in invalid reads from the regmap
in cache-only mode if the work runs before the device has
resumed:

[   56.245502] rt5682 9-001a: ASoC: error at soc_component_read_no_lock on rt5682.9-001a for register: [0x000000f0] -16

Disable the jack detection interrupt during suspend and
re-enable it on resume. The driver already schedules the
jack detection work on resume, so any state change during
suspend is still handled.

This is essentially the same as commit f7d00a9be147 ("SoC:
rt5682s: Disable jack detection interrupt during suspend")
for the rt5682s.

Cc: stable@kernel.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org
Link: https://lore.kernel.org/r/20230516164629.1.Ibf79e94b3442eecc0054d2b478779cc512d967fc@changeid
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: bq25890: Fix external_power_changed race

commit 029a443b9b6424170f00f6dd5b7682e682cce92e upstream.

bq25890_charger_external_power_changed() dereferences bq->charger,
which gets sets in bq25890_power_supply_init() like this:

  bq->charger = devm_power_supply_register(bq->dev, &bq->desc, &psy_cfg);

As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where bq25890_charger_external_power_changed() may get called while
bq->charger has not been set yet leading to a NULL pointer dereference.

This race hits during boot sometimes on a Lenovo Yoga Book 1 yb1-x90f
when the cht_wcove_pwrsrc (extcon) power_supply is done with detecting
the connected charger-type which happens to exactly hit the small window:

  BUG: kernel NULL pointer dereference, address: 0000000000000018
  <snip>
  RIP: 0010:__power_supply_is_supplied_by+0xb/0xb0
  <snip>
  Call Trace:
   <TASK>
   __power_supply_get_supplier_property+0x19/0x50
   class_for_each_device+0xb1/0xe0
   power_supply_get_property_from_supplier+0x2e/0x50
   bq25890_charger_external_power_changed+0x38/0x1b0 [bq25890_charger]
   __power_supply_changed_work+0x30/0x40
   class_for_each_device+0xb1/0xe0
   power_supply_changed_work+0x5f/0xe0
  <snip>

Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in bq->charger,
so bq25890_charger_external_power_changed() can simply directly use
the passed in psy argument which is always valid.

Fixes: eab25b4f93aa ("power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection")
Cc: stable@vger.kernel.org
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

power: supply: axp288_fuel_gauge: Fix external_power_changed race

commit f8319774d6f1567d6e7d03653174ab0c82c5c66d upstream.

fuel_gauge_external_power_changed() dereferences info->bat,
which gets sets in axp288_fuel_gauge_probe() like this:

  info->bat = devm_power_supply_register(dev, &fuel_gauge_desc, &psy_cfg);

As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where fuel_gauge_external_power_changed() may get called while
info->bat has not been set yet leading to a NULL pointer dereference.

Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in info->bat,
so fuel_gauge_external_power_changed() can simply directly use
the passed in psy argument which is always valid.

Fixes: 30abb3d07929 ("power: supply: axp288_fuel_gauge: Take lock before updating the valid flag")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: block: ensure error propagation for non-blk

commit 003fb0a51162d940f25fc35e70b0996a12c9e08a upstream.

Requests to the mmc layer usually come through a block device IO.
The exceptions are the ioctl interface, RPMB chardev ioctl
and debugfs, which issue their own blk_mq requests through
blk_execute_rq and do not query the BLK_STS error but the
mmcblk-internal drv_op_result. This patch ensures that drv_op_result
defaults to an error and has to be overwritten by the operation
to be considered successful.

The behavior leads to a bug where the request never propagates
the error, e.g. by directly erroring out at mmc_blk_mq_issue_rq if
mmc_blk_part_switch fails. The ioctl caller of the rpmb chardev then
can never see an error (BLK_STS_IOERR, but drv_op_result is unchanged)
and thus may assume that their call executed successfully when it did not.

While always checking the blk_execute_rq return value would be
advised, let's eliminate the error by always setting
drv_op_result as -EIO to be overwritten on success (or other error)

Fixes: 614f0388f580 ("mmc: block: move single ioctl() commands to block requests")
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/59c17ada35664b818b7bd83752119b2d@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-esdhc-imx: make "no-mmc-hs400" works

commit 81dce1490e28439c3cd8a8650b862a712f3061ba upstream.

After commit 1ed5c3b22fc7 ("mmc: sdhci-esdhc-imx: Propagate
ESDHC_FLAG_HS400* only on 8bit bus"), the property "no-mmc-hs400"
from device tree file do not work any more.
This patch reorder the code, which can avoid the warning message
"drop HS400 support since no 8-bit bus" and also make the property
"no-mmc-hs400" from dts file works.

Fixes: 1ed5c3b22fc7 ("mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230504112222.3599602-1-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Don't change task->tk_status after the call to rpc_exit_task

commit d180891fba995bd54e25b089b1ec98d134873586 upstream.

Some calls to rpc_exit_task() may deliberately change the value of
task->tk_status, for instance because it gets checked by the RPC call's
rpc_release() callback. That makes it wrong to reset the value to
task->tk_rpc_status.
In particular this causes a bug where the rpc_call_done() callback tries
to fail over a set of pNFS/flexfiles writes to a different IP address,
but the reset of task->tk_status causes nfs_commit_release_pages() to
immediately mark the file as having a fatal error.

Fixes: 39494194f93b ("SUNRPC: Fix races with rpc_killall_tasks()")
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable headset onLenovo M70/M90

commit 4ca110cab46561cd74a2acd9b447435acb4bec5f upstream.

Lenovo M70/M90 Gen4 are equipped with ALC897, and they need
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
The previous quirk for M70/M90 is for Gen3.

Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Fix unhandled register update during auto-suspend period

commit 81302b1c7c997e8a56c1c2fc63a296ebeb0cd2d0 upstream.

It's reported that the recording started right after the driver probe
doesn't work properly, and it turned out that this is related with the
codec auto-suspend.  Namely, after the probe phase, the usage count
goes zero, and the auto-suspend is programmed, but the codec is kept
still active until the auto-suspend expiration.  When an application
(e.g. alsactl) updates the mixer values at this moment, the values are
cached but not actually written.  Then, starting arecord thereafter
also results in the silence because of the missing unmute.

The root cause is the handling of "lazy update" mode; when a mixer
value is updated *after* the suspend, it should update only the cache
and exits.  At the resume, the cached value is written to the device,
in turn.  The problem is that the current code misinterprets the state
of auto-suspend as if it were already suspended.

Although we can add the check of the actual device state after
pm_runtime_get_if_in_use() for catching the missing state, this won't
suffice; the second call of regmap_update_bits_check() will skip
writing the register because the cache has been already updated by the
first call.  So we'd need fixes in two different places.

OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with
pm_runtime_get_if_active() (with ign_usage_count=true).  This change
implies that the driver takes the pm refcount if the device is still
in ACTIVE state and continues the processing.  A small caveat is that
this will leave the auto-suspend timer.  But, since the timer callback
itself checks the device state and aborts gracefully when it's active,
this won't be any substantial problem.

Long story short: we address the missing register-write problem just
by replacing the pm_runtime_*() call in snd_hda_keep_power_up().

Fixes: fc4f000bf8c0 ("ALSA: hda - Fix unexpected resume through regmap code path")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/ca0132: add quirk for EVGA X299 DARK

commit 7843380d07bbeffd3ce6504e73cf61f840ae76ca upstream.

This quirk is necessary for surround and other DSP effects to work
with the onboard ca0132 based audio chipset for the EVGA X299 dark
mainboard.

Signed-off-by: Adam Stylinski <kungfujesus06@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=67071
Link: https://lore.kernel.org/r/ZGopOe19T1QOwizS@eggsbenedict.adamsnet
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86/intel/ifs: Annotate work queue on stack so object debug does not complain

commit 3279decb2c3c8d58cb0b70ed5235c480735a36ee upstream.

Object Debug results in the following warning while attempting to load
ifs firmware:

[  220.007422] ODEBUG: object 000000003bf952db is on stack 00000000e843994b, but NOT annotated.
[  220.007459] ------------[ cut here ]------------
[  220.007461] WARNING: CPU: 0 PID: 11774 at lib/debugobjects.c:548 __debug_object_init.cold+0x22e/0x2d5
[  220.137476] RIP: 0010:__debug_object_init.cold+0x22e/0x2d5
[  220.254774] Call Trace:
[  220.257641]  <TASK>
[  220.265606]  scan_chunks_sanity_check+0x368/0x5f0 [intel_ifs]
[  220.288292]  ifs_load_firmware+0x2a3/0x400 [intel_ifs]
[  220.332793]  current_batch_store+0xea/0x160 [intel_ifs]
[  220.357947]  kernfs_fop_write_iter+0x355/0x530
[  220.363048]  new_sync_write+0x28e/0x4a0
[  220.381226]  vfs_write+0x62a/0x920
[  220.385160]  ksys_write+0xf9/0x1d0
[  220.399421]  do_syscall_64+0x59/0x90
[  220.440635]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  220.566845] ---[ end trace 3a01b299db142b41 ]---

Correct this by calling INIT_WORK_ONSTACK instead of INIT_WORK.

Fixes: 684ec215706d ("platform/x86/intel/ifs: Authenticate and copy to secured memory")
Signed-off-by: David Arcari <darcari@redhat.com>
Cc: Jithu Joseph <jithu.joseph@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230523105400.674152-1-darcari@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Avoid incomplete Global INVLPG flushes

commit ce0b15d11ad837fbacc5356941712218e38a0a83 upstream.

The INVLPG instruction is used to invalidate TLB entries for a
specified virtual address.  When PCIDs are enabled, INVLPG is supposed
to invalidate TLB entries for the specified address for both the
current PCID *and* Global entries.  (Note: Only kernel mappings set
Global=1.)

Unfortunately, some INVLPG implementations can leave Global
translations unflushed when PCIDs are enabled.

As a workaround, never enable PCIDs on affected processors.

I expect there to eventually be microcode mitigations to replace this
software workaround.  However, the exact version numbers where that
will happen are not known today.  Once the version numbers are set in
stone, the processor list can be tweaked to only disable PCIDs on
affected processors with affected microcode.

Note: if anyone wants a quick fix that doesn't require patching, just
stick 'nopcid' on your kernel command-line.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Also reset KASAN tag if page is not PG_mte_tagged

commit 2efbafb91e12ff5a16cbafb0085e4c10c3fca493 upstream.

Consider the following sequence of events:

1) A page in a PROT_READ|PROT_WRITE VMA is faulted.
2) Page migration allocates a page with the KASAN allocator,
   causing it to receive a non-match-all tag, and uses it
   to replace the page faulted in 1.
3) The program uses mprotect() to enable PROT_MTE on the page faulted in 1.

As a result of step 3, we are left with a non-match-all tag for a page
with tags accessible to userspace, which can lead to the same kind of
tag check faults that commit e74a68468062 ("arm64: Reset KASAN tag in
copy_highpage with HW tags only") intended to fix.

The general invariant that we have for pages in a VMA with VM_MTE_ALLOWED
is that they cannot have a non-match-all tag. As a result of step 2, the
invariant is broken. This means that the fix in the referenced commit
was incomplete and we also need to reset the tag for pages without
PG_mte_tagged.

Fixes: e5b8d9218951 ("arm64: mte: reset the page tag in page->flags")
Cc: <stable@vger.kernel.org> # 5.15
Link: https://linux-review.googlesource.com/id/I7409cdd41acbcb215c2a7417c1e50d37b875beff
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230420210945.2313627-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: Switch to security_inode_init_security()

commit de3004c874e740304cc4f4a83d6200acb511bbda upstream.

In preparation for removing security_old_inode_init_security(), switch to
security_inode_init_security().

Extend the existing ocfs2_initxattrs() to take the
ocfs2_security_xattr_info structure from fs_info, and populate the
name/value/len triple with the first xattr provided by LSMs.

As fs_info was not used before, ocfs2_initxattrs() can now handle the case
of replicating the behavior of security_old_inode_init_security(), i.e.
just obtaining the xattr, in addition to setting all xattrs provided by
LSMs.

Supporting multiple xattrs is not currently supported where
security_old_inode_init_security() was called (mknod, symlink), as it
requires non-trivial changes that can be done at a later time. Like for
reiserfs, even if EVM is invoked, it will not provide an xattr (if it is
not the first to set it, its xattr will be discarded; if it is the first,
it does not have xattrs to calculate the HMAC on).

Finally, since security_inode_init_security(), unlike
security_old_inode_init_security(), returns zero instead of -EOPNOTSUPP if
no xattrs were provided by LSMs or if inodes are private, additionally
check in ocfs2_init_security_get() if the xattr name is set.

If not, act as if security_old_inode_init_security() returned -EOPNOTSUPP,
and set si->enable to zero to notify to the functions following
ocfs2_init_security_get() that no xattrs are available.

Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: hpd rx irq not working with eDP interface

commit eeefe7c4820b6baa0462a8b723ea0a3b5846ccae upstream.

[Why]
This is the fix for the defect of commit ab144f0b4ad6
("drm/amd/display: Allow individual control of eDP hotplug support").

[How]
To revise the default eDP hotplug setting and use the enum to git rid
of the magic number for different options.

Fixes: ab144f0b4ad6 ("drm/amd/display: Allow individual control of eDP hotplug support")
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit eeefe7c4820b6baa0462a8b723ea0a3b5846ccae)
Hand modified for missing file rename changes and symbol moves in 6.1.y.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6xxx: Add RGMII delay to 88E6320

commit 91e87045a5ef6f7003e9a2cb7dfa435b9b002dbe upstream.

Currently, the .port_set_rgmii_delay hook is missing for the 88E6320
family, which causes failure to retrieve an IP address via DHCP.

Add mv88e6320_port_set_rgmii_delay() that allows applying the RGMII
delay for ports 2, 5, and 6, which are the only ports that can be used
in RGMII mode.

Tested on a custom i.MX8MN board connected to an 88E6320 switch.

This change also applies safely to the 88E6321 variant.

The only difference between 88E6320 versus 88E6321 is the temperature
grade and pinout.

They share exactly the same MDIO register map for ports 2, 5, and 6,
which are the only ports that can be used in RGMII mode.

Signed-off-by: Steffen Bätz <steffen@innosonix.de>
[fabio: Improved commit log and extended it to mv88e6321_ops]
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221028163158.198108-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: hp-wmi: Fix cast to smaller integer type warning

commit ce95010ef62d4bf470928969bafc9070ae98cbb1 upstream.

Fix the following compiler warning:

drivers/platform/x86/hp/hp-wmi.c:551:24: warning: cast to smaller integer
   type 'enum hp_wmi_radio' from 'void *' [-Wvoid-pointer-to-enum-cast]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230123132824.660062-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

skbuff: Proactively round up to kmalloc bucket size

commit 12d6c1d3a2ad0c199ec57c201cdc71e8e157a232 upstream.

Instead of discovering the kmalloc bucket size _after_ allocation, round
up proactively so the allocation is explicitly made for the full size,
allowing the compiler to correctly reason about the resulting size of
the buffer through the existing __alloc_size() hint.

This will allow for kernels built with CONFIG_UBSAN_BOUNDS or the
coming dynamic bounds checking under CONFIG_FORTIFY_SOURCE to gain
back the __alloc_size() hints that were temporarily reverted in commit
93dd04ab0b2b ("slab: remove __alloc_size attribute from __kmalloc_track_caller")

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20221021234713.you.031-kees@kernel.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221025223811.up.360-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cc: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/mes11: enable reg active poll

commit a6b3b618c0f7abc3f543dd0c57b2b19a770bffec upstream.

Enable reg active poll in mes11.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-and-acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Gong, Richard" <richard.gong@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/amdgpu: update mes11 api def

commit 1e7bbdba68baf6af7500dd636f18b6fcce58e945 upstream.

Update the api def of mes11.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-and-acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Gong, Richard" <richard.gong@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: sp5100_tco: Immediately trigger upon starting.

commit 4eda19cc8a29cde3580ed73bf11dc73b4e757697 upstream.

The watchdog countdown is supposed to begin when the device file is
opened. Instead, it would begin countdown upon the first write to or
close of the device file. Now, the ping operation is called within the
start operation which ensures the countdown begins. From experimenation,
it does not appear possible to do this with a single write including
both the start bit and the trigger bit. So, it is done as two distinct
writes.

Signed-off-by: Gregory Oakes <gregory.oakes@amd.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230316201312.17538-1-gregory.oakes@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Prevent hwrng from activating during resume

[ Upstream commit 99d46450625590d410f86fe4660a5eff7d3b8343 ]

Set TPM_CHIP_FLAG_SUSPENDED in tpm_pm_suspend() and reset in
tpm_pm_resume(). While the flag is set, tpm_hwrng() gives back zero
bytes. This prevents hwrng from racing during resume.

Cc: stable@vger.kernel.org
Fixes: 6e592a065d51 ("tpm: Move Linux RNG connection to hwrng")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm: Re-enable TPM chip boostrapping non-tpm_tis TPM drivers

[ Upstream commit 0c8862de05c1a087795ee0a87bf61a6394306cc0 ]

TPM chip bootstrapping was removed from tpm_chip_register(), and it
was relocated to tpm_tis_core. This breaks all drivers which are not
based on tpm_tis because the chip will not get properly initialized.

Take the corrective steps:
1. Rename tpm_chip_startup() as tpm_chip_bootstrap() and make it one-shot.
2. Call tpm_chip_bootstrap() in tpm_chip_register(), which reverts the
   things  as tehy used to be.

Cc: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Fixes: 548eb516ec0f ("tpm, tpm_tis: startup chip before testing for interrupts")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/all/ZEjqhwHWBnxcaRV5@xpf.sh.intel.com/
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Stable-dep-of: 99d464506255 ("tpm: Prevent hwrng from activating during resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>