Changbin Du [Sat, 8 Aug 2020 02:31:41 +0000 (10:31 +0800)]
perf ftrace: Add change log
Add a change log after previous enhancements.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-19-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:40 +0000 (10:31 +0800)]
perf: ftrace: Add set_tracing_options() to set all trace options
Now the __cmd_ftrace() becomes a bit long. This moves the trace option
setting code to a separate function set_tracing_options().
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-18-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:39 +0000 (10:31 +0800)]
perf ftrace: Add option --tid to filter by thread id
This allows us to trace single thread instead of the whole process.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-17-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:38 +0000 (10:31 +0800)]
perf ftrace: Add option -D/--delay to delay tracing
This adds an option '-D/--delay' to allow us to start tracing some times
later after workload is launched.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-16-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:37 +0000 (10:31 +0800)]
perf: ftrace: Allow set graph depth by '--graph-opts'
This is to have a consistent view of all graph tracer options.
The original option '--graph-depth' is marked as deprecated.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-15-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:36 +0000 (10:31 +0800)]
perf ftrace: Add support for trace option tracing_thresh
This adds an option '--graph-opts thresh' to setup trace duration
threshold for funcgraph tracer.
$ sudo ./perf ftrace -G '*' --graph-opts thresh=100
3) ! 184.060 us | } /* schedule */
3) ! 185.600 us | } /* exit_to_usermode_loop */
2) ! 225.989 us | } /* schedule_idle */
2) # 4140.051 us | } /* do_idle */
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-14-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:35 +0000 (10:31 +0800)]
perf ftrace: Add option 'verbose' to show more info for graph tracer
Sometimes we want ftrace display more and longer information about the
trace.
$ sudo perf ftrace -G '*'
2) 0.979 us | mutex_unlock();
2) 1.540 us | __fsnotify_parent();
2) 0.433 us | fsnotify();
$ sudo perf ftrace -G '*' --graph-opts verbose
14160.770883 | 0) <...>-47814 | .... | 1.289 us | mutex_unlock();
14160.770886 | 0) <...>-47814 | .... | 1.624 us | __fsnotify_parent();
14160.770887 | 0) <...>-47814 | .... | 0.636 us | fsnotify();
14160.770888 | 0) <...>-47814 | .... | 0.328 us | __sb_end_write();
14160.770888 | 0) <...>-47814 | d... | 0.430 us | fpregs_assert_state_consistent();
14160.770889 | 0) <...>-47814 | d... | | do_syscall_64() {
14160.770889 | 0) <...>-47814 | .... | | __x64_sys_close() {
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-13-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:34 +0000 (10:31 +0800)]
perf ftrace: Add support for tracing option 'irq-info'
This adds support to display irq context info for function tracer. To do
this, just specify a '--func-opts irq-info' option.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-12-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:33 +0000 (10:31 +0800)]
perf ftrace: Add support for trace option funcgraph-irqs
This adds an option '--graph-opts noirqs' to filter out functions executed
in irq context.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-11-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:32 +0000 (10:31 +0800)]
perf ftrace: Add support for trace option sleep-time
This adds an option '--graph-opts nosleep-time' which allow us only to
measure on-CPU time. This option is function_graph tracer only.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-10-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:31 +0000 (10:31 +0800)]
perf ftrace: Add support for tracing option 'func_stack_trace'
This adds support to display call trace for function tracer. To do this,
just specify a '--func-opts call-graph' option.
Example:
$ sudo perf ftrace -T vfs_read --func-opts call-graph
iio-sensor-prox-855 [003] 6168.369657: vfs_read <-ksys_read
iio-sensor-prox-855 [003] 6168.369677: <stack trace>
=> vfs_read
=> ksys_read
=> __x64_sys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
...
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-9-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:30 +0000 (10:31 +0800)]
perf tools: Add general function to parse sublevel options
This factors out a general function perf_parse_sublevel_options() to
parse sublevel options. The 'sublevel' options is something like the
'--debug' options which allow more sublevel options.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-8-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:29 +0000 (10:31 +0800)]
perf ftrace: Add option '--inherit' to trace children processes
This adds an option '--inherit' to allow us trace children
processes spawned by our target.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-7-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:28 +0000 (10:31 +0800)]
perf ftrace: Show trace column header
This makes 'perf ftrace' display column header before printing trace.
$ sudo perf ftrace
# tracer: function
#
# entries-in-buffer/entries-written: 0/0 #P:8
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
<...>-9246 [006] 10726.262760: mutex_unlock <-rb_simple_write
<...>-9246 [006] 10726.262764: __fsnotify_parent <-vfs_write
<...>-9246 [006] 10726.262765: fsnotify <-vfs_write
<...>-9246 [006] 10726.262766: __sb_end_write <-vfs_write
<...>-9246 [006] 10726.262767: fpregs_assert_state_consistent <-do_syscall_64
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-6-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:27 +0000 (10:31 +0800)]
perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size
This adds an option '-m/--buffer-size' to allow us set the size of per-cpu
tracing buffer.
Committer testing:
Before running with this option:
# find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat
1408
1408
1408
1408
1408
1408
1408
1408
1408
#
Then, run:
# perf ftrace -m 2048K | head -10
2) | mutex_unlock() {
2) ==========> |
2) | smp_irq_work_interrupt() {
2) | irq_enter() {
2) 0.121 us | rcu_irq_enter();
2) 0.128 us | irqtime_account_irq();
2) 0.719 us | }
2) | __wake_up() {
2) | __wake_up_common_lock() {
2) 0.105 us | _raw_spin_lock_irqsave();
#
Now look at those tracefs knobs:
# find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat
2048
2048
2048
2048
2048
2048
2048
2048
2048
#
This should be similar to the -m option in the other perf tools, such as
'perf record', 'perf trace', etc.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-5-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:26 +0000 (10:31 +0800)]
perf ftrace: Factor out function write_tracing_file_int()
We will reuse this function later.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-4-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:25 +0000 (10:31 +0800)]
perf ftrace: Add option '-F/--funcs' to list available functions
This adds an option '-F/--funcs' to list all available functions to
trace, which is read from tracing file 'available_filter_functions'.
$ sudo ./perf ftrace -F | head
trace_initcall_finish_cb
initcall_blacklisted
do_one_initcall
do_one_initcall
trace_initcall_start_cb
run_init_process
try_to_run_init_process
match_dev_by_label
match_dev_by_uuid
rootfs_init_fs_context
$
Committer notes:
This is the same command line option and for the same purpose as in
'perf probe'.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-3-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changbin Du [Sat, 8 Aug 2020 02:31:24 +0000 (10:31 +0800)]
perf ftrace: Select function/function_graph tracer automatically
The '-g/-G' options have already implied function_graph tracer should be
used instead of function tracer. So we don't need extra option
'--tracer' in this case.
This patch changes the behavior as below:
- If '-g' or '-G' option is on, then function_graph tracer is used.
- If '-T' or '-N' option is on, then function tracer is used.
- The function_graph has priority over function tracer.
- The option '--tracer' only take effect if neither -g/-G nor -T/-N
is specified.
Here are some examples.
This will start tracing all functions using default tracer:
$ sudo perf ftrace
This will trace all functions using function graph tracer:
$ sudo perf ftrace -G '*'
This will trace function vfs_read using function graph tracer:
$ sudo perf ftrace -G vfs_read
This will trace function vfs_read using function tracer:
$ sudo perf ftrace -T vfs_read
Committer notes:
Using '-h -G' will tell what that option is about, so to further clarify
the above examples:
# perf ftrace -h -G
-G, --graph-funcs <func> Set graph filter on given functions
# perf ftrace -h -g
-g, --nograph-funcs <func> Set nograph filter on given functions
# perf ftrace -h -T
-T, --trace-funcs <func> trace given functions only
# perf ftrace -h -N
-N, --notrace-funcs <func> do not trace given functions
#
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-2-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexander Gordeev [Thu, 13 Aug 2020 11:32:48 +0000 (13:32 +0200)]
perf bench numa: Use numa_node_to_cpus() to bind tasks to nodes
It is currently assumed that each node contains at most nr_cpus/nr_nodes
CPUs and nodes' CPU ranges do not overlap.
That assumption is generally incorrect as there are archs where a CPU
number does not depend on to its node number.
This update removes the described assumption by simply calling
numa_node_to_cpus() interface and using the returned mask for binding
CPUs to nodes.
Also, variable types and names made consistent in functions using
cpumask.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Balamuruhan S <bala24@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20200813113247.GA2014@oc3871087118.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexander Gordeev [Thu, 13 Aug 2020 11:30:42 +0000 (13:30 +0200)]
perf bench numa: Fix cpumask memory leak in node_has_cpus()
Couple numa_allocate_cpumask() and numa_free_cpumask() functions
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Balamuruhan S <bala24@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20200813113041.GA1685@oc3871087118.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Díaz [Wed, 12 Aug 2020 22:15:17 +0000 (17:15 -0500)]
tools build feature: Quote CC and CXX for their arguments
When using a cross-compilation environment, such as OpenEmbedded,
the CC an CXX variables are set to something more than just a
command: there are arguments (such as --sysroot) that need to be
passed on to the compiler so that the right set of headers and
libraries are used.
For the particular case that our systems detected, CC is set to
the following:
export CC="aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/machine/perf/1.0-r9/recipe-sysroot"
Without quotes, detection is as follows:
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:414: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
Makefile.perf:230: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:69: recipe for target 'all' failed
make: *** [all] Error 2
With CC and CXX quoted, some of those features are now detected.
Fixes:
e3232c2f39ac ("tools build feature: Use CC and CXX from parent")
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Reviewed-by: Thomas Hebb <tommyhebb@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200812221518.2869003-1-daniel.diaz@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 8 Aug 2020 12:26:56 +0000 (14:26 +0200)]
perf tools: Fix module symbol processing
The 'dso->kernel' condition is true also for kernel modules now,
and there are several places that were omited by the initial change:
- we need to identify modules separately in dso__process_kernel_symbol
- we need to set 'dso->kernel' for module from buildid table
- there's no need to use 'dso->kernel || kmodule' in one condition
Committer testing:
Before:
# perf test -v object
<SNIP>
Objdump command is: objdump -z -d --start-address=0xffffffff813e682f --stop-address=0xffffffff813e68af /usr/lib/debug/lib/modules/5.7.14-200.fc32.x86_64/vmlinux
Bytes read match those read by objdump
Reading object code for memory address: 0xffffffffc02dc257
File is: /lib/modules/5.7.14-200.fc32.x86_64/kernel/arch/x86/crypto/crc32c-intel.ko.xz
On file address is: 0xffffffffc02dc2e7
dso__data_read_offset failed
test child finished with -1
---- end ----
Object code reading: FAILED!
#
After:
# perf test object
26: Object code reading : Ok
# perf test object
26: Object code reading : Ok
# perf test object
26: Object code reading : Ok
# perf test object
26: Object code reading : Ok
# perf test object
26: Object code reading : Ok
#
Fixes:
02213cec64bb ("perf maps: Mark module DSOs with kernel type")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Jiri Olsa [Sat, 8 Aug 2020 12:21:54 +0000 (14:21 +0200)]
perf tools: Rename 'enum dso_kernel_type' to 'enum dso_space_type'
Rename enum dso_kernel_type to enum dso_space_type, which seems like
better fit.
Committer notes:
This is used with 'struct dso'->kernel, which once was a boolean, so
DSO_SPACE__USER is zero, !zero means some sort of kernel space, be it
the host kernel space or a guest kernel space.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rob Herring [Fri, 7 Aug 2020 19:32:25 +0000 (13:32 -0600)]
MAINTAINERS: Add missing tools/lib/perf/ path to perf maintainers
Commit
3ce311afb558 ("libperf: Move to tools/lib/perf") moved libperf
out of tools/perf/, but failed to update MAINTAINERS.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200807193225.3904108-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rob Herring [Fri, 7 Aug 2020 19:32:41 +0000 (13:32 -0600)]
libperf: Fix man page typos
Fix various typos and inconsistent capitalization of CPU in the libperf
man pages.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200807193241.3904545-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Petlan [Wed, 22 Jul 2020 13:58:45 +0000 (15:58 +0200)]
perf test: Allow multiple probes in record+script_probe_vfs_getname.sh
Sometimes when adding a kprobe by perf, it results in multiple probe
points, such as the following:
# ./perf probe -l
probe:vfs_getname (on getname_flags:73@fs/namei.c with pathname)
probe:vfs_getname_1 (on getname_flags:73@fs/namei.c with pathname)
probe:vfs_getname_2 (on getname_flags:73@fs/namei.c with pathname)
# cat /sys/kernel/debug/tracing/kprobe_events
p:probe/vfs_getname _text+5501804 pathname=+0(+0(%gpr31)):string
p:probe/vfs_getname_1 _text+5505388 pathname=+0(+0(%gpr31)):string
p:probe/vfs_getname_2 _text+5508396 pathname=+0(+0(%gpr31)):string
In this test, we need to record all of them and expect any of them in
the perf-script output, since it's not clear which one will be used for
the desired syscall:
# perf stat -e probe:vfs_getname\* -- touch /tmp/nic
Performance counter stats for 'touch /tmp/nic':
31 probe:vfs_getname_2
0 probe:vfs_getname_1
1 probe:vfs_getname
0.
001421826 seconds time elapsed
0.
001506000 seconds user
0.
000000000 seconds sys
If the test relies only on probe:vfs_getname, it might easily miss the
relevant data.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
LPU-Reference:
20200722135845.29958-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Vincent Whitchurch [Mon, 10 Aug 2020 13:34:04 +0000 (15:34 +0200)]
perf bench mem: Always memset source before memcpy
For memcpy, the source pages are memset to zero only when --cycles is
used. This leads to wildly different results with or without --cycles,
since all sources pages are likely to be mapped to the same zero page
without explicit writes.
Before this fix:
$ export cmd="./perf stat -e LLC-loads -- ./perf bench \
mem memcpy -s 1024MB -l 100 -f default"
$ $cmd
2,935,826 LLC-loads
3.
821677452 seconds time elapsed
$ $cmd --cycles
217,533,436 LLC-loads
8.
616725985 seconds time elapsed
After this fix:
$ $cmd
214,459,686 LLC-loads
8.
674301124 seconds time elapsed
$ $cmd --cycles
214,758,651 LLC-loads
8.
644480006 seconds time elapsed
Fixes:
47b5757bac03c338 ("perf bench mem: Move boilerplate memory allocation to the infrastructure")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel@axis.com
Link: http://lore.kernel.org/lkml/20200810133404.30829-1-vincent.whitchurch@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Fri, 7 Aug 2020 16:48:44 +0000 (10:48 -0600)]
perf sched: Prefer sched_waking event when it exists
Commit
fbd705a0c618 ("sched: Introduce the 'trace_sched_waking'
tracepoint") added sched_waking tracepoint which should be preferred
over sched_wakeup when analyzing scheduling delays.
Update 'perf sched record' to collect sched_waking events if it exists
and fallback to sched_wakeup if it does not. Similarly, update timehist
command to skip sched_wakeup events if the session includes sched_waking
(ie., sched_waking is preferred over sched_wakeup).
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20200807164844.44870-1-dsahern@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Colin Ian King [Wed, 12 Aug 2020 06:46:47 +0000 (07:46 +0100)]
perf bench: Fix a couple of spelling mistakes in options text
There are a couple of spelling mistakes in the text. Fix these.
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200812064647.200132-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexander Gordeev [Mon, 10 Aug 2020 06:22:00 +0000 (08:22 +0200)]
perf bench numa: Fix benchmark names
Standard benchmark names let users know the tests specifics. For
example "2x1-bw-process" name tells that two processes one thread each
are run and the RAM bandwidth is measured.
Several benchmarks names do not correspond to their actual running
configuration. Fix that and also some whitespace and comment
inconsistencies.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/6b6f2084f132ee8e9203dc7c32f9deb209b87a68.1597004831.git.agordeev@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexander Gordeev [Mon, 10 Aug 2020 06:21:59 +0000 (08:21 +0200)]
perf bench numa: Fix number of processes in "2x3-convergence" test
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/d949f5f48e17fc816f3beecf8479f1b2480345e4.1597004831.git.agordeev@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 12 Aug 2020 12:02:40 +0000 (09:02 -0300)]
tools headers UAPI: Sync kvm.h headers with the kernel sources
To pick the changes in:
3edd68399dc1 ("KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support")
1aa561b1a4c0 ("kvm: x86: Add "last CPU" to some KVM_EXIT information")
23a60f834406 ("s390/kvm: diagnose 0x318 sync and reset")
That do not result in any change in tooling, as the additions are not
being used in any table generator.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Collin Walling <walling@linux.ibm.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mohammed Gamal <mgamal@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 12 Aug 2020 11:57:07 +0000 (08:57 -0300)]
tools include UAPI: Sync linux/vhost.h with the kernel sources
To get the changes in:
25abc060d282 ("vhost-vdpa: support IOTLB batching hints")
This doesn't result in any changes in tooling, no new ioctls to be
picked up by the id->string table generators, etc.
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 12 Aug 2020 11:52:32 +0000 (08:52 -0300)]
tools headers kvm s390: Sync headers with the kernel sources
To pick the changes in:
23a60f834406 ("s390/kvm: diagnose 0x318 sync and reset")
None of them trigger any changes in tooling, this time this is just to silence
these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Collin Walling <walling@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 12 Aug 2020 11:43:51 +0000 (08:43 -0300)]
perf trace beauty: Use the autogenerated protocol family table
That helps us not to lose new protocol families when they are
introduced, replacing that hardcoded, dated family->string table.
To recap what this allows us to do:
# perf trace -e syscalls:sys_enter_socket/max-stack=10/ --filter=family==INET --max-events=1
0.000 fetchmail/41097 syscalls:sys_enter_socket(family: INET, type: DGRAM|CLOEXEC|NONBLOCK, protocol: IP)
__GI___socket (inlined)
reopen (/usr/lib64/libresolv-2.31.so)
send_dg (/usr/lib64/libresolv-2.31.so)
__res_context_send (/usr/lib64/libresolv-2.31.so)
__GI___res_context_query (inlined)
__GI___res_context_search (inlined)
_nss_dns_gethostbyname4_r (/usr/lib64/libnss_dns-2.31.so)
gaih_inet.constprop.0 (/usr/lib64/libc-2.31.so)
__GI_getaddrinfo (inlined)
[0x15cb2] (/usr/bin/fetchmail)
#
More work is still needed to allow for the more natura strace-like
syscall name usage instead of the trace event name:
# perf trace -e socket/max-stack=10,family==INET/ --max-events=1
I.e. to allow for modifiers to follow the syscall name and for logical
expressions to be accepted as filters to use with that syscall, be it as
trace event filters or BPF based ones.
Using -v we can see how the trace event filter is built:
# perf trace -v -e syscalls:sys_enter_socket/call-graph=dwarf/ --filter=family==INET --max-events=2
<SNIP>
New filter for syscalls:sys_enter_socket: (family==0x2) && (common_pid != 41384 && common_pid != 2836)
<SNIP>
$ tools/perf/trace/beauty/socket.sh | grep -w 2
[2] = "INET",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 12 Aug 2020 11:30:06 +0000 (08:30 -0300)]
perf trace beauty: Add script to autogenerate socket families table
To use with 'perf trace', to convert the protocol families to strings,
e.g:
$ tools/perf/trace/beauty/socket.sh
static const char *socket_families[] = {
[0] = "UNSPEC",
[1] = "LOCAL",
[2] = "INET",
[3] = "AX25",
[4] = "IPX",
[5] = "APPLETALK",
[6] = "NETROM",
[7] = "BRIDGE",
[8] = "ATMPVC",
[9] = "X25",
[10] = "INET6",
[11] = "ROSE",
[12] = "DECnet",
[13] = "NETBEUI",
[14] = "SECURITY",
[15] = "KEY",
[16] = "NETLINK",
[17] = "PACKET",
[18] = "ASH",
[19] = "ECONET",
[20] = "ATMSVC",
[21] = "RDS",
[22] = "SNA",
[23] = "IRDA",
[24] = "PPPOX",
[25] = "WANPIPE",
[26] = "LLC",
[27] = "IB",
[28] = "MPLS",
[29] = "CAN",
[30] = "TIPC",
[31] = "BLUETOOTH",
[32] = "IUCV",
[33] = "RXRPC",
[34] = "ISDN",
[35] = "PHONET",
[36] = "IEEE802154",
[37] = "CAIF",
[38] = "ALG",
[39] = "NFC",
[40] = "VSOCK",
[41] = "KCM",
[42] = "QIPCRTR",
[43] = "SMC",
[44] = "XDP",
};
$
This uses a copy of include/linux/socket.h that is kept in a directory
to be used just for these table generation scripts and for checking if
the kernel has a new file that maybe gets something new for these
tables.
This allows us to:
- Avoid accessing files outside tools/, in the kernel sources, that may
be changed in unexpected ways and thus break these scripts.
- Notice when those files change and thus check if the changes don't
break those scripts, update them to automatically get the new
definitions, a new socket family, for instance.
- Not add then to the tools/include/ where it may end up used while
building the tools and end up requiring dragging yet more stuff from
the kernel or plain break the build in some of the myriad environments
where perf may be built.
This will replace the previous static array in tools/perf/ that was
dated and was already missing the AF_KCM, AF_QIPCRTR, AF_SMC and AF_XDP
families.
The next cset will wire this up to the perf build process.
At some point this must be made into a library to be used in places such
as libtraceevent, bpftrace, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Wed, 12 Aug 2020 00:28:32 +0000 (17:28 -0700)]
Merge tag 'tag-chrome-platform-for-v5.9' of git://git./linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Add support for switch control and alternate modes to the Chrome EC
Type C port driver
- Add basic suspend/resume support
sensorhub:
- Fix timestamp overflow issue
- Fix legacy timestamp spreading on Nami systems
cros_ec_proto:
- After removing all users of, stop exporting cros_ec_cmd_xfer
- Check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK and ignore
wakeups on old ECs
misc:
- Documentation warning cleanup
- Fix double unlock issue in ishtp"
* tag 'tag-chrome-platform-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (21 commits)
platform/chrome: cros_ec_proto: check for missing EC_CMD_HOST_EVENT_GET_WAKE_MASK
platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs
platform/chrome: cros_ec_sensorhub: Simplify legacy timestamp spreading
platform/chrome: cros_ec_proto: Do not export cros_ec_cmd_xfer()
platform/chrome: cros_ec_typec: Unregister partner on error
platform/chrome: cros_ec_sensorhub: Fix EC timestamp overflow
platform/chrome: cros_ec_typec: Add PM support
platform/chrome: cros_ec_typec: Use workqueue for port update
platform/chrome: cros_ec_typec: Add a dependency on USB_ROLE_SWITCH
platform/chrome: cros_ec_ishtp: Fix a double-unlock issue
platform/chrome: cros_ec_rpmsg: Document missing struct parameters
platform/chrome: cros_ec_spi: Document missing function parameters
platform/chrome: cros_ec_typec: Add TBT compat support
platform/chrome: cros_ec: Add TBT pd_ctrl fields
platform/chrome: cros_ec_typec: Make configure_mux static
platform/chrome: cros_ec_typec: Support DP alt mode
platform/chrome: cros_ec_typec: Add USB mux control
platform/chrome: cros_ec_typec: Register PD CTRL cmd v2
platform/chrome: cros_ec: Update mux state bits
platform/chrome: cros_ec_typec: Register Type C switches
...
Linus Torvalds [Wed, 12 Aug 2020 00:08:11 +0000 (17:08 -0700)]
Merge tag 'for-linus-5.9-ofs1' of git://git./linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"A fix and a cleanup...
The fix: Al Viro pointed out that I had broken some acl functionality
with one of my previous patches.
And the cleanup: Jing Xiangfeng found and removed a needless variable
assignment"
* tag 'for-linus-5.9-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: remove unnecessary assignment to variable ret
orangefs: posix acl fix...
Linus Torvalds [Wed, 12 Aug 2020 00:05:55 +0000 (17:05 -0700)]
Merge tag 'zonefs-5.9-rc1' of git://git./linux/kernel/git/dlemoal/zonefs
Pull zonefs update from Damien Le Moal:
"A single change for this cycle adding support for zone capacities
smaller than the zone size, from Johannes"
* tag 'zonefs-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: update documentation to reflect zone size vs capacity
zonefs: add zone-capacity support
Linus Torvalds [Tue, 11 Aug 2020 21:43:12 +0000 (14:43 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix recordmcount build failure on non-arm64 (caused by an arm64
patch)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
recordmcount: Fix build failure on non arm64
Linus Torvalds [Tue, 11 Aug 2020 21:34:17 +0000 (14:34 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- IRQ bypass support for vdpa and IFC
- MLX5 vdpa driver
- Endianness fixes for virtio drivers
- Misc other fixes
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (71 commits)
vdpa/mlx5: fix up endian-ness for mtu
vdpa: Fix pointer math bug in vdpasim_get_config()
vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()
vdpa/mlx5: fix memory allocation failure checks
vdpa/mlx5: Fix uninitialised variable in core/mr.c
vdpa_sim: init iommu lock
virtio_config: fix up warnings on parisc
vdpa/mlx5: Add VDPA driver for supported mlx5 devices
vdpa/mlx5: Add shared memory registration code
vdpa/mlx5: Add support library for mlx5 VDPA implementation
vdpa/mlx5: Add hardware descriptive header file
vdpa: Modify get_vq_state() to return error code
net/vdpa: Use struct for set/get vq state
vdpa: remove hard coded virtq num
vdpasim: support batch updating
vhost-vdpa: support IOTLB batching hints
vhost-vdpa: support get/set backend features
vhost: generialize backend features setting/getting
vhost-vdpa: refine ioctl pre-processing
vDPA: dont change vq irq after DRIVER_OK
...
Linus Torvalds [Tue, 11 Aug 2020 21:30:36 +0000 (14:30 -0700)]
Merge tag 'for-v5.9' of git://git./linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"A couple of minor documentation updates only for this release"
* tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: drop duplicated words in header file comments
Replace HTTP links with HTTPS ones: security
Linus Torvalds [Tue, 11 Aug 2020 21:13:24 +0000 (14:13 -0700)]
Merge tag 'iommu-updates-v5.9' of git://git./linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
Linus Torvalds [Tue, 11 Aug 2020 20:48:02 +0000 (13:48 -0700)]
Merge tag 'backlight-next-5.9' of git://git./linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Core Framework:
- Trivial: Code refactoring
- New API backlight_is_blank()
- New API backlight_get_brightness()
- Additional/reworked documentation
- Remove 'extern' labels from prototypes
- Drop backlight_put()
- Staticify of_find_backlight()
Driver Removal:
- Removal of unused OT200 driver
- Removal of unused Generic Backlight driver
Fix-ups
- Bunch of W=1 warning fixes
- Convert to GPIO descriptors; sky81452
- Move platform data handling into driver; sky81452
- Remove superfluous code; lms501kf03
- Many instances of using new APIs"
* tag 'backlight-next-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (34 commits)
video: backlight: cr_bllcd: Remove unused variable 'intensity'
backlight: backlight: Make of_find_backlight static
backlight: backlight: Drop backlight_put()
backlight: Use backlight_get_brightness() throughout
backlight: jornada720_bl: Introduce backlight_is_blank()
backlight: gpio_backlight: Simplify update_status()
backlight: cr_bllcd: Introduce gpio-backlight semantics
backlight: as3711_bl: Simplify update_status
backlight: backlight: Introduce backlight_get_brightness()
doc-rst: Wire-up Backlight kernel-doc documentation
backlight: backlight: Add overview and update existing doc
backlight: backlight: Drop extern from prototypes
backlight: generic_bl: Remove this driver as it is unused
backlight: backlight: Document enums in backlight.h
backlight: backlight: Document inline functions in backlight.h
backlight: backlight: Improve backlight_device documentation
backlight: backlight: Improve backlight_properties documentation
backlight: backlight: Improve backlight_ops documentation
backlight: backlight: Add backlight_is_blank()
backlight: backlight: Refactor fb_notifier_callback()
...
Linus Torvalds [Tue, 11 Aug 2020 18:53:34 +0000 (11:53 -0700)]
Merge tag 'hwlock-v5.9' of git://git./linux/kernel/git/andersson/remoteproc
Pull hwspinlock updates from Bjorn Andersson:
"This introduces a new DT binding format to describe the Qualcomm
hardware mutex block and deprecates the old, invalid, one.
It also cleans up the Kconfig slightly"
* tag 'hwlock-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
dt-bindings: hwlock: qcom: Remove invalid binding
hwspinlock: qcom: Allow mmio usage in addition to syscon
dt-bindings: hwlock: qcom: Allow device on mmio bus
dt-bindings: hwlock: qcom: Migrate binding to YAML
hwspinlock: Simplify Kconfig
Linus Torvalds [Tue, 11 Aug 2020 18:17:45 +0000 (11:17 -0700)]
Merge tag 'rproc-v5.9' of git://git./linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces a new "detached" state for remote processors that are
deemed to be running at the time Linux boots and the infrastructure
for "attaching" to these. It then introduces the support for
performing this operation for the STM32 platform.
The coredump functionality is moved out from the core file and gains
support for an optional mode where the recovery phase awaits the
notification from devcoredump that the dump should be released. This
allows userspace to grab the coredump in scenarios where vmalloc space
is too low for creating a complete copy of the coredump before handing
this to devcoredump.
A new character device based interface is introduced to allow tying
the stoppage of a remote processor to the termination of a user space
process. This is useful in situations when such process provides
crucial resources/operations for the firmware running on the remote
processor.
The Texas Instrument K3 driver gains support for the C66x and C71x
DSPs.
Qualcomm remoteprocs gains support for stashing relocation information
in IMEM, to aid post mortem debugging and the crash notification
mechanism is generalized to be reusable in cases where loosely coupled
drivers needs to know about the status of a remote processor. One such
example is the IPA hardware block, which is jointly owned with the
modem and migrated to this improved interface.
It also introduces a number of bug fixes and debug improvements for
the Qualcomm modem remoteproc driver.
And it cleans up the inconsistent interface for remoteproc drivers to
implement power management"
* tag 'rproc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (56 commits)
remoteproc: core: Register the character device interface
remoteproc: Add remoteproc character device interface
remoteproc: kill IPA notify code
net: ipa: new notification infrastructure
remoteproc: k3-dsp: Add support for C71x DSPs
dt-bindings: remoteproc: k3-dsp: Update bindings for C71x DSPs
remoteproc: k3-dsp: Add support for L2RAM loading on C66x DSPs
remoteproc: k3-dsp: Add a remoteproc driver of K3 C66x DSPs
dt-bindings: remoteproc: Add bindings for C66x DSPs on TI K3 SoCs
remoteproc: k3: Add TI-SCI processor control helper functions
remoteproc: Introduce rproc_of_parse_firmware() helper
dt-bindings: arm: keystone: Add common TI SCI bindings
remoteproc: qcom_q6v5_mss: Remove redundant running state
remoteproc: qcom: q6v5: Update running state before requesting stop
remoteproc: qcom_q6v5_mss: Add modem debug policy support
remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load
remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load
rpmsg: update documentation
remoteproc: qcom_q6v5_mss: Add MBA log extraction support
remoteproc: Add coredump debugfs entry
...
Linus Torvalds [Tue, 11 Aug 2020 18:13:17 +0000 (11:13 -0700)]
Merge tag 'rpmsg-v5.9' of git://git./linux/kernel/git/andersson/remoteproc
Pull rpmsg update from Bjorn Andersson:
"This ensures that rpmsg uses little-endian, per the VirtIO 1.0
specification"
* tag 'rpmsg-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: virtio: add endianness conversions
Linus Torvalds [Tue, 11 Aug 2020 17:59:19 +0000 (10:59 -0700)]
Merge tag 'libnvdimm-for-5.9' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updayes from Vishal Verma:
"You'd normally receive this pull request from Dan Williams, but he's
busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm
this cycle.
This adds a new feature in libnvdimm - 'Runtime Firmware Activation',
and a few small cleanups and fixes in libnvdimm and DAX. I'd
originally intended to make separate topic-based pull requests - one
for libnvdimm, and one for DAX, but some of the DAX material fell out
since it wasn't quite ready.
Summary:
- add 'Runtime Firmware Activation' support for NVDIMMs that
advertise the relevant capability
- misc libnvdimm and DAX cleanups"
* tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr
libnvdimm/security: the 'security' attr never show 'overwrite' state
libnvdimm/security: fix a typo
ACPI: NFIT: Fix ARS zero-sized allocation
dax: Fix incorrect argument passed to xas_set_err()
ACPI: NFIT: Add runtime firmware activate support
PM, libnvdimm: Add runtime firmware activation support
libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()
drivers/dax: Expand lock scope to cover the use of addresses
fs/dax: Remove unused size parameter
dax: print error message by pr_info() in __generic_fsdax_supported()
driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}
tools/testing/nvdimm: Emulate firmware activation commands
tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation
tools/testing/nvdimm: Add command debug messages
tools/testing/nvdimm: Cleanup dimm index passing
ACPI: NFIT: Define runtime firmware activation commands
ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor
libnvdimm: Validate command family indices
Johannes Thumshirn [Tue, 21 Jul 2020 12:10:27 +0000 (21:10 +0900)]
zonefs: update documentation to reflect zone size vs capacity
Update the zonefs documentation to reflect the difference between a zone's
size and it's capacity.
The maximum file size in zonefs is the zones capacity, for ZBC and ZAC
based devices, which do not have a separate zone capacity, the zone
capacity is equal to the zone size.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Johannes Thumshirn [Tue, 21 Jul 2020 12:10:26 +0000 (21:10 +0900)]
zonefs: add zone-capacity support
In the zoned storage model, the sectors within a zone are typically all
writeable. With the introduction of the Zoned Namespace (ZNS) Command
Set in the NVM Express organization, the model was extended to have a
specific writeable capacity.
This zone capacity can be less than the overall zone size for a NVMe ZNS
device or null_blk in zoned-mode. For other ZBC/ZAC devices the zone
capacity is always equal to the zone size.
Use the zone capacity field instead from blk_zone for determining the
maximum inode size and inode blocks in zonefs.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Linus Torvalds [Tue, 11 Aug 2020 02:21:38 +0000 (19:21 -0700)]
Merge tag 'perf-tools-2020-08-10' of git://git./linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
"New features:
- Introduce controlling how 'perf stat' and 'perf record' works via a
control file descriptor, allowing starting with events configured
but disabled until commands are received via the control file
descriptor. This allows, for instance for tools such as Intel VTune
to make further use of perf as its Linux platform driver.
- Improve 'perf record' to to register in a perf.data file header the
clockid used to help later correlate things like syslog files and
perf events recorded.
- Add basic syscall and find_next_bit benchmarks to 'perf bench'.
- Allow using computed metrics in calculating other metrics. For
instance:
{
.metric_expr = "l2_rqsts.demand_data_rd_hit + l2_rqsts.pf_hit + l2_rqsts.rfo_hit",
.metric_name = "DCache_L2_All_Hits",
},
{
.metric_expr = "max(l2_rqsts.all_demand_data_rd - l2_rqsts.demand_data_rd_hit, 0) + l2_rqsts.pf_miss + l2_rqsts.rfo_miss",
.metric_name = "DCache_L2_All_Miss",
},
{
.metric_expr = "dcache_l2_all_hits + dcache_l2_all_miss",
.metric_name = "DCache_L2_All",
}
- Add suport for 'd_ratio', '>' and '<' operators to the expression
resolver used in calculating metrics in 'perf stat'.
Support for new kernel features:
- Support TEXT_POKE and KSYMBOL_TYPE_OOL perf metadata events to cope
with things like ftrace, trampolines, i.e. changes in the kernel
text that gets in the way of properly decoding Intel PT hardware
traces, for instance.
Intel PT:
- Add various knobs to reduce the volume of Intel PT traces by
reducing the level of details such as decoding just some types of
packets (e.g., FUP/TIP, PSB+), also filtering by time range.
- Add new itrace options (log flags to the 'd' option, error flags to
the 'e' one, etc), controlling how Intel PT is transformed into
perf events, document some missing options (e.g., how to synthesize
callchains).
BPF:
- Properly report BPF errors when parsing events.
- Do not setup side-band events if LIBBPF is not linked, fixing a
segfault.
Libraries:
- Improvements to the libtraceevent plugin mechanism.
- Improve libtracevent support for KVM trace events SVM exit reasons.
- Add a libtracevent plugins for decoding syscalls/sys_enter_futex
and for tlb_flush.
- Ensure sample_period is set libpfm4 events in 'perf test'.
- Fixup libperf namespacing, to make sure what is in libperf has the
perf_ namespace while what is now only in tools/perf/ doesn't use
that prefix.
Arch specific:
- Improve the testing of vendor events and metrics in 'perf test'.
- Allow no ARM CoreSight hardware tracer sink to be specified on
command line.
- Fix arm_spe_x recording when mixed with other perf events.
- Add s390 idle functions 'psw_idle' and 'psw_idle_exit' to list of
idle symbols.
- List kernel supplied event aliases for arm64 in 'perf list'.
- Add support for extended register capability in PowerPC 9 and 10.
- Added nest IMC power9 metric events.
Miscellaneous:
- No need to setup sample_regs_intr/sample_regs_user for dummy
events.
- Update various copies of kernel headers, some causing perf to
handle new syscalls, MSRs, etc.
- Improve usage of flex and yacc, enabling warnings and addressing
the fallout.
- Add missing '--output' option to 'perf kmem' so that it can pass it
along to 'perf record'.
- 'perf probe' fixes related to adding multiple probes on the same
address for the same event.
- Make 'perf probe' warn if the target function is a GNU indirect
function.
- Remove //anon mmap events from 'perf inject jit' to fix supporting
both using ELF files for generated functions and the perf-PID.map
approaches"
* tag 'perf-tools-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (144 commits)
perf record: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set
perf tools powerpc: Add support for extended regs in power10
perf tools powerpc: Add support for extended register capability
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: update linux/in.h copy
tools headers API: Update close_range affected files
perf script: Add 'tod' field to display time of day
perf script: Change the 'enum perf_output_field' enumerators to be 64 bits
perf data: Add support to store time of day in CTF data conversion
perf tools: Move clockid_res_ns under clock struct
perf header: Store clock references for -k/--clockid option
perf tools: Add clockid_name function
perf clockid: Move parse_clockid() to new clockid object
tools lib traceevent: Handle possible strdup() error in tep_add_plugin_path() API
libtraceevent: Fixed description of tep_add_plugin_path() API
libtraceevent: Fixed type in PRINT_FMT_STING
libtraceevent: Fixed broken indentation in parse_ip4_print_args()
libtraceevent: Improve error handling of tep_plugin_add_option() API
...
Linus Torvalds [Tue, 11 Aug 2020 02:16:26 +0000 (19:16 -0700)]
Merge tag 'ktest-v5.9' of git://git./linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Have config-bisect save the good/bad configs at each step.
- Show log file location even on success
- Add PRE_TEST_DIE to kill test if the PRE_TEST fails
- Add a NOT operator for conditionals in config file
- Add the log output of the last test when emailing on failure.
- Other minor clean ups and small fixes.
* tag 'ktest-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix spelling mistake "Cant" -> "Can't"
ktest.pl: Change the logic to control the size of the log file emailed
ktest.pl: Add MAIL_MAX_SIZE to limit the amount of log emailed
ktest.pl: Add the log of last test in email on failure
ktest.pl: Turn off buffering to the log file
ktest.pl: Just open up the log file once
ktest.pl: Add a NOT operator
ktest.pl: Define PRE_TEST_DIE to kill the test if the PRE_TEST fails
ktest.pl: Always show log file location if defined even on success
ktest.pl: Have config-bisect save each config used in the bisect
Linus Torvalds [Tue, 11 Aug 2020 02:07:44 +0000 (19:07 -0700)]
Merge tag 'locking-urgent-2020-08-10' of git://git./linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
Linus Torvalds [Tue, 11 Aug 2020 01:33:22 +0000 (18:33 -0700)]
Merge tag 'f2fs-for-5.9-rc1' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added two small interfaces: (a) GC_URGENT_LOW
mode for performance and (b) F2FS_IOC_SEC_TRIM_FILE ioctl for
security.
The new GC mode allows Android to run some lower priority GCs in
background, while new ioctl discards user information without race
condition when the account is removed.
In addition, some patches were merged to address latency-related
issues. We've fixed some compression-related bug fixes as well as edge
race conditions.
Enhancements:
- add GC_URGENT_LOW mode in gc_urgent
- introduce F2FS_IOC_SEC_TRIM_FILE ioctl
- bypass racy readahead to improve read latencies
- shrink node_write lock coverage to avoid long latency
Bug fixes:
- fix missing compression flag control, i_size, and mount option
- fix deadlock between quota writes and checkpoint
- remove inode eviction path in synchronous path to avoid deadlock
- fix to wait GCed compressed page writeback
- fix a kernel panic in f2fs_is_compressed_page
- check page dirty status before writeback
- wait page writeback before update in node page write flow
- fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry
We've added some minor sanity checks and refactored trivial code
blocks for better readability and debugging information"
* tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
f2fs: prepare a waiter before entering io_schedule
f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive
f2fs: replace test_and_set/clear_bit() with set/clear_bit()
f2fs: make file immutable even if releasing zero compression block
f2fs: compress: disable compression mount option if compression is off
f2fs: compress: add sanity check during compressed cluster read
f2fs: use macro instead of f2fs verity version
f2fs: fix deadlock between quota writes and checkpoint
f2fs: correct comment of f2fs_exist_written_data
f2fs: compress: delay temp page allocation
f2fs: compress: fix to update isize when overwriting compressed file
f2fs: space related cleanup
f2fs: fix use-after-free issue
f2fs: Change the type of f2fs_flush_inline_data() to void
f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl
f2fs: should avoid inode eviction in synchronous path
f2fs: segment.h: delete a duplicated word
f2fs: compress: fix to avoid memory leak on cc->cpages
f2fs: use generic names for generic ioctls
f2fs: don't keep meta inode pages used for compressed block migration
...
Linus Torvalds [Tue, 11 Aug 2020 01:22:43 +0000 (18:22 -0700)]
Merge tag 'gfs2-for-5.9' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Make sure transactions won't be started recursively in
gfs2_block_zero_range (bug introduced in 5.4 when switching to
iomap_zero_range)
- Fix a glock holder refcount leak introduced in the iopen glock
locking scheme rework merged in 5.8.
- A few other small improvements (debugging, stack usage, comment
fixes).
* tag 'gfs2-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: When gfs2_dirty_inode gets a glock error, dump the glock
gfs2: Never call gfs2_block_zero_range with an open transaction
gfs2: print details on transactions that aren't properly ended
gfs2: Fix inaccurate comment
fs: Fix typo in comment
gfs2: Fix refcount leak in gfs2_glock_poke
gfs2: Pass glock holder to gfs2_file_direct_{read,write}
gfs2: Add some flags missing from glock output
Linus Torvalds [Tue, 11 Aug 2020 01:20:04 +0000 (18:20 -0700)]
Merge tag 'for-linus-5.9-rc1' of git://git./linux/kernel/git/rw/ubifs
Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
"JFFS2:
- Fix for a corner case while mounting
- Fix for an use-after-free issue
UBI:
- Fix for a memory load while attaching
- Don't produce an anchor PEB with fastmap being disabled
UBIFS:
- Fix for orphan inode logic
- Spelling fixes
- New mount option to specify filesystem version"
* tag 'for-linus-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: fix UAF problem
jffs2: fix jffs2 mounting failure
ubifs: Fix wrong orphan node deletion in ubifs_jnl_update|rename
ubi: fastmap: Free fastmap next anchor peb during detach
ubi: fastmap: Don't produce the initial next anchor PEB when fastmap is disabled
ubifs: misc.h: delete a duplicated word
ubifs: add option to specify version for new file systems
Linus Torvalds [Mon, 10 Aug 2020 23:35:57 +0000 (16:35 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- an update to Elan touchpad controller driver supporting newer ICs
with enhanced precision reports and a new firmware update process
- an update to EXC3000 touch controller supporting additional parts
- assorted driver fixups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits)
Input: exc3000 - add support to query model and fw_version
Input: exc3000 - add reset gpio support
Input: exc3000 - add EXC80H60 and EXC80H84 support
dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema
Input: sentelic - fix error return when fsp_reg_write fails
Input: alps - remove redundant assignment to variable ret
Input: ims-pcu - return error code rather than -ENOMEM
Input: elan_i2c - add ic type 0x15
Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary
Input: uinput - fix typo in function name documentation
Input: ati_remote2 - add missing newlines when printing module parameters
Input: psmouse - add a newline when printing 'proto' by sysfs
Input: synaptics-rmi4 - drop a duplicated word
Input: elan_i2c - add support for high resolution reports
Input: elan_i2c - do not constantly re-query pattern ID
Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14
Input: elan_i2c - handle firmware updated on newer ICs
Input: elan_i2c - add support for different firmware page sizes
Input: elan_i2c - fix detecting IAP version on older controllers
Input: elan_i2c - handle devices with patterns above 1
...
Linus Torvalds [Mon, 10 Aug 2020 23:33:54 +0000 (16:33 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- fix for some modern devices that return multi-byte battery report,
from Grant Likely
- fix for devices with Resolution Multiplier, from Peter Hutterer
- device probing speed increase, from Dmitry Torokhov
- ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede
- other small assorted fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: quirks: add NOGET quirk for Logitech GROUP
HID: Replace HTTP links with HTTPS ones
HID: udraw-ps3: Replace HTTP links with HTTPS ones
HID: mcp2221: Replace HTTP links with HTTPS ones
HID: input: Fix devices that return multiple bytes in battery report
HID: lenovo: Fix spurious F23 key press report during resume from suspend
HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard fn_lock support
HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support
HID: lenovo: Rename fn_lock sysfs attr handlers to make them generic
HID: lenovo: Factor out generic parts of the LED code
HID: lenovo: Merge tpkbd and cptkbd data structures
HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state
HID: Wiimote: Treat the d-pad as an analogue stick
HID: input: do not run GET_REPORT unless there's a Resolution Multiplier
HID: usbhid: remove redundant assignment to variable retval
HID: usbhid: do not sleep when opening device
Colin Ian King [Mon, 10 Aug 2020 10:07:50 +0000 (11:07 +0100)]
ktest.pl: Fix spelling mistake "Cant" -> "Can't"
There is a spelling mistake in an error message. Fix it.
Link: https://lkml.kernel.org/r/20200810100750.61475-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Thu, 2 Jul 2020 13:56:15 +0000 (09:56 -0400)]
ktest.pl: Change the logic to control the size of the log file emailed
If the log file for a given test is larger than the max size given then use
set the seek from the end of the log file instead of from the start of the
test.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Michael S. Tsirkin [Mon, 10 Aug 2020 13:13:10 +0000 (09:13 -0400)]
vdpa/mlx5: fix up endian-ness for mtu
VDPA mlx5 accesses config space as native endian - this is
wrong since it's a modern device and actually uses LE.
It only supports modern guests so we could punt and
just force LE, but let's use the full virtio APIs since people
tend to copy/paste code, and this is not data path anyway.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dan Carpenter [Mon, 6 Apr 2020 14:45:52 +0000 (17:45 +0300)]
vdpa: Fix pointer math bug in vdpasim_get_config()
If "offset" is non-zero then we end up copying from beyond the end of
the config because of pointer math. We can fix this by casting the
struct to a u8 pointer.
Fixes:
2c53d0f64c06 ("vdpasim: vDPA device simulator")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200406144552.GF68494@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Christophe Leroy [Mon, 10 Aug 2020 08:48:22 +0000 (08:48 +0000)]
recordmcount: Fix build failure on non arm64
Commit
ea0eada45632 leads to the following build failure on powerpc:
HOSTCC scripts/recordmcount
scripts/recordmcount.c: In function 'arm64_is_fake_mcount':
scripts/recordmcount.c:440: error: 'R_AARCH64_CALL26' undeclared (first use in this function)
scripts/recordmcount.c:440: error: (Each undeclared identifier is reported only once
scripts/recordmcount.c:440: error: for each function it appears in.)
make[2]: *** [scripts/recordmcount] Error 1
Make sure R_AARCH64_CALL26 is always defined.
Fixes:
ea0eada45632 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Gregory Herrero <gregory.herrero@oracle.com>
Cc: Gregory Herrero <gregory.herrero@oracle.com>
Link: https://lore.kernel.org/r/5ca1be21fa6ebf73203b45fd9aadd2bafb5e6b15.1597049145.git.christophe.leroy@csgroup.eu
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Dan Carpenter [Sat, 8 Aug 2020 09:32:41 +0000 (12:32 +0300)]
vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()
There is a pointer math bug here so if "offset" is non-zero then this
will copy memory from beyond the end of the array.
Fixes:
1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200808093241.GB115053@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Cc: Jason Wang <jasowang@redhat.com>; Parav Pandit <parav@mellanox.com>; virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org; kernel-janitors@vger.kernel.org
Fixes:
1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Colin Ian King [Thu, 6 Aug 2020 16:08:28 +0000 (17:08 +0100)]
vdpa/mlx5: fix memory allocation failure checks
The memory allocation failure checking for in and out is currently
checking if the pointers are valid rather than the contents of what
they point to. Hence the null check on failed memory allocations is
incorrect. Fix this by adding the missing indirection in the check.
Also for the default case, just set the *in and *out to null as
these don't have any thing allocated to kfree. Finally remove the
redundant *in and *out check as these have been already done on each
allocation in the case statement.
Addresses-Coverity: ("Null pointer dereference")
Fixes:
1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200806160828.90463-1-colin.king@canonical.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eli Cohen <eli@mellanox.com>
Alex Dewar [Thu, 6 Aug 2020 18:56:15 +0000 (19:56 +0100)]
vdpa/mlx5: Fix uninitialised variable in core/mr.c
If the kernel is unable to allocate memory for the variable dmr then
err will be returned without being set. Set err to -ENOMEM in this
case.
Fixes:
94abbccdf291 ("vdpa/mlx5: Add shared memory registration code")
Addresses-Coverity: ("Uninitialized variables")
Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk>
Link: https://lore.kernel.org/r/20200806185625.67344-1-alex.dewar@gmx.co.uk
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eli Cohen <eli@mellanox.com>
Michael S. Tsirkin [Mon, 10 Aug 2020 12:44:43 +0000 (08:44 -0400)]
vdpa_sim: init iommu lock
The patch adding the iommu lock did not initialize it.
The struct is zero-initialized so this is mostly a problem
when using lockdep.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Fixes:
0ea9ee430e74 ("vdpasim: protect concurrent access to iommu iotlb")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jiri Kosina [Mon, 10 Aug 2020 09:23:07 +0000 (11:23 +0200)]
Merge branch 'for-5.9/wiimote' into for-linus
Jiri Kosina [Mon, 10 Aug 2020 09:22:21 +0000 (11:22 +0200)]
Merge branch 'for-5.9/lenovo' into for-linus
- ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede
Jiri Kosina [Mon, 10 Aug 2020 09:21:59 +0000 (11:21 +0200)]
Merge branch 'for-5.9/intel-ish' into for-linus
Jiri Kosina [Mon, 10 Aug 2020 09:19:41 +0000 (11:19 +0200)]
Merge branch 'for-5.9/core-v2' into for-linus
- fix for some modern devices that return multi-byte battery report, from
Grant Likely
- fix for devices with Resolution Multiplier, from Peter Hutterer
- device probing speed increase, from Dmitry Torokhov
Linus Torvalds [Sun, 9 Aug 2020 21:10:26 +0000 (14:10 -0700)]
Merge tag 'kbuild-v5.9' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
Linus Torvalds [Sun, 9 Aug 2020 20:58:04 +0000 (13:58 -0700)]
Merge tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6
Pull NFS server updates from Chuck Lever:
"Highlights:
- Support for user extended attributes on NFS (RFC 8276)
- Further reduce unnecessary NFSv4 delegation recalls
Notable fixes:
- Fix recent krb5p regression
- Address a few resource leaks and a rare NULL dereference
Other:
- De-duplicate RPC/RDMA error handling and other utility functions
- Replace storage and display of kernel memory addresses by tracepoints"
* tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6: (38 commits)
svcrdma: CM event handler clean up
svcrdma: Remove transport reference counting
svcrdma: Fix another Receive buffer leak
SUNRPC: Refresh the show_rqstp_flags() macro
nfsd: netns.h: delete a duplicated word
SUNRPC: Fix ("SUNRPC: Add "@len" parameter to gss_unwrap()")
nfsd: avoid a NULL dereference in __cld_pipe_upcall()
nfsd4: a client's own opens needn't prevent delegations
nfsd: Use seq_putc() in two functions
svcrdma: Display chunk completion ID when posting a rw_ctxt
svcrdma: Record send_ctxt completion ID in trace_svcrdma_post_send()
svcrdma: Introduce Send completion IDs
svcrdma: Record Receive completion ID in svc_rdma_decode_rqst
svcrdma: Introduce Receive completion IDs
svcrdma: Introduce infrastructure to support completion IDs
svcrdma: Add common XDR encoders for RDMA and Read segments
svcrdma: Add common XDR decoders for RDMA and Read segments
SUNRPC: Add helpers for decoding list discriminators symbolically
svcrdma: Remove declarations for functions long removed
svcrdma: Clean up trace_svcrdma_send_failed() tracepoint
...
Linus Torvalds [Sun, 9 Aug 2020 20:33:54 +0000 (13:33 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs
Pull regset conversion fix from Al Viro:
"Fix a regression from an unnoticed bisect hazard in the regset series.
A bunch of old (aout, originally) primitives used by coredumps became
dead code after fdpic conversion to regsets. Removal of that dead code
had been the first commit in the followups to regset series;
unfortunately, it happened to hide the bisect hazard on sh (extern for
fpregs_get() had not been updated in the main series when it should
have been; followup simply made fpregs_get() static). And without that
followup commit this bisect hazard became breakage in the mainline"
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kill unused dump_fpu() instances
Linus Torvalds [Sun, 9 Aug 2020 19:52:28 +0000 (12:52 -0700)]
Merge tag 'pinctrl-v5.9-1' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of the pin control changes for the v5.9 kernel
series:
Core changes:
- The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range()
macro" was put in an immutable branch and merged into the pinctrl
tree as well. We see these changes also here.
- Improved debug output for pins used as GPIO.
New drivers:
- Ocelot Sparx5 SoC driver.
- Intel Emmitsburg SoC subdriver.
- Intel Tiger Lake-H SoC subdriver.
- Qualcomm PM660 SoC subdriver.
- Renesas SH-PFC R8A774E1 subdriver.
Driver improvements:
- Linear improvement and cleanups of the Intel drivers for
Cherryview, Lynxpoint, Baytrail etc. Improved locking among other
things.
- Renesas SH-PFC has added support for RPC pins, groups, and
functions to r8a77970 and r8a77980.
- The newere Freescale (now NXP) i.MX8 pin controllers have been
modularized. This is driven by the Google Android GKI initiative I
think.
- Open drain support for pins on the Qualcomm IPQ4019.
- The Ingenic driver can handle both edges IRQ detection.
- A big slew of documentation fixes all over the place.
- A few irqchip template conversions by yours truly.
* tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC
pinctrl: stmfx: Use irqchip template
pinctrl: amd: Use irqchip template
pinctrl: mediatek: fix build for tristate changes
pinctrl: samsung: Use bank name as irqchip name
pinctrl: core: print gpio in pins debugfs file
pinctrl: mediatek: add mt6779 eint support
pinctrl: mediatek: add pinctrl support for MT6779 SoC
pinctrl: mediatek: avoid virtual gpio trying to set reg
pinctrl: mediatek: update pinmux definitions for mt6779
pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API
pinctrl: mcp23s08: Use irqchip template
pinctrl: sx150x: Use irqchip template
dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes
pinctrl: intel: Add Intel Emmitsburg pin controller support
pinctl: ti: iodelay: Replace HTTP links with HTTPS ones
Revert "gpio: omap: handle pin config bias flags"
pinctrl: single: Use fallthrough pseudo-keyword
pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword
pinctrl: baytrail: Use fallthrough pseudo-keyword
...
Linus Torvalds [Sun, 9 Aug 2020 19:38:51 +0000 (12:38 -0700)]
Merge tag 'mtd/for-5.9' of git://git./linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Spelling
- http to https updates
NAND core changes:
- Drop useless 'depends on' in Kconfig
- Add an extra level in the Kconfig hierarchy
- Trivial spellings
- Dynamic allocation of the interface configurations
- Dropping the default ONFI timing mode
- Various cleanup (types, structures, naming, comments)
- Hide the chip->data_interface indirection
- Add the generic rb-gpios property
- Add the ->choose_interface_config() hook
- Introduce nand_choose_best_sdr_timings()
- Use default values for tPROG_max and tBERS_max
- Avoid redefining tR_max and tCCS_min
- Add a helper to find the closest ONFI mode
- bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
- fsl-upm: Deprecation of specific DT properties
- fsl_upm: Driver rework and cleanup in favor of ->exec_op()
- Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
- brcmnand: ECC error handling on EDU transfers
- brcmnand: Don't default to EDU transfers
- qcom: Set BAM mode only if not set already
- qcom: Avoid write to unavailable register
- gpio: Driver rework in favor of ->exec_op()
- tango: ->exec_op() conversion
- mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
- toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4,
TC58NVG0S3E, and TC58TEG5DCLTA00
- hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
SPI NOR core changes:
- Disable Quad Mode in spi_nor_restore().
- Don't abort BFPT parsing when QER reserved value is used.
- Add support/update capabilities for few flashes.
- Drop s70fl01gs flash: it does not support RDSR(05h) which is
critical for erase/write.
- Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during
the release cycle.
SPI NOR controller drivers changes:
- Move the cadence-quadspi driver to spi-mem. The series was taken
through the SPI tree. Merge it also in spi-nor/next to avoid
conflicts during the release cycle.
- intel-spi:
- Add new PCI IDs.
- Ignore the Write Disable command, the controller doesn't support
it.
- Fix performance regression"
* tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits)
MTD: pfow.h: drop a duplicated word
MTD: mtd-abi.h: drop a duplicated word
mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones
mtd: Replace HTTP links with HTTPS ones
mtd: hyperbus: Replace HTTP links with HTTPS ones
mtd: revert "spi-nor: intel: provide a range for poll_timout"
mtd: spi-nor: update read capabilities for w25q64 and s25fl064k
mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g
mtd: spi-nor: macronix: Add support for mx66u2g45g
mtd: spi-nor: intel-spi: Simulate WRDI command
mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()
mtd: spi-nor: Add capability to disable flash quad mode
mtd: spi-nor: spansion: Remove s70fl01gs from flash_info
mtd: spi-nor: sfdp: do not make invalid quad enable fatal
dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags
mtd: rawnand: stm32_fmc2: get resources from parent node
mtd: rawnand: stm32_fmc2: use regmap APIs
memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation
dt-bindings: mtd: update STM32 FMC2 NAND controller documentation
...
Stephen Rothwell [Tue, 30 Jun 2020 05:51:50 +0000 (15:51 +1000)]
thunderbolt: merge fix for kunix_resource changes
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Sat, 1 Aug 2020 15:00:50 +0000 (00:00 +0900)]
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
Commit
d26e94149276 ("kbuild: no gcc-plugins during cc-option tests")
was neeeded because scripts/Makefile.gcc-plugins was too early.
This is unneeded by including scripts/Makefile.gcc-plugins last,
and being careful to not add cc-option tests after it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Sat, 1 Aug 2020 15:00:49 +0000 (00:00 +0900)]
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
Currently, the top Makefile includes all of scripts/Makefile.<feature>
even if the associated CONFIG option is disabled.
Do not include unneeded Makefiles in order to slightly optimize the
parse stage.
Include $(include-y), and ignore $(include-).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Sat, 1 Aug 2020 12:27:18 +0000 (21:27 +0900)]
kbuild: introduce hostprogs-always-y and userprogs-always-y
To build host programs, you need to add the program names to 'hostprogs'
to use the necessary build rule, but it is not enough to build them
because there is no dependency.
There are two types of host programs: built as the prerequisite of
another (e.g. gen_crc32table in lib/Makefile), or always built when
Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile).
The latter is typical in Makefiles under scripts/, which contains host
programs globally used during the kernel build. To build them, you need
to add them to both 'hostprogs' and 'always-y'.
This commit adds hostprogs-always-y as a shorthand.
The same applies to user programs. net/bpfilter/Makefile builds
bpfilter_umh on demand, hence always-y is unneeded. In contrast,
programs under samples/ are added to both 'userprogs' and 'always-y'
so they are always built when Kbuild visits the Makefiles.
userprogs-always-y works as a shorthand.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Masahiro Yamada [Wed, 29 Jul 2020 03:15:37 +0000 (12:15 +0900)]
kbuild: sort hostprogs before passing it to ifneq
The conditional:
ifneq ($(hostprogs),)
... is evaluated to true if $(hostprogs) does not contain any word but
whitespace characters.
ifneq ($(strip $(hostprogs)),)
... is a safe way to avoid interpreting whitespace as a non-empty value,
but I'd rather want to use the side-effect of $(sort ...) to do the
equivalent.
$(sort ...) is used in scripts/Makefile.host in order to drop duplication
in $(hostprogs). It is also useful to strip excessive spaces.
Move $(sort ...) before evaluating the ifneq.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Wed, 29 Jul 2020 03:15:36 +0000 (12:15 +0900)]
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
The host shared library rules are currently implemented in
scripts/Makefile.host, but actually GCC-plugin is the only user of
them. (The VDSO .so files are built for the target by different
build rules) Hence, they do not need to be treewide available.
Move all the relevant build rules to scripts/gcc-plugins/Makefile.
I also optimized the build steps so *.so is directly built from .c
because every upstream plugin is compiled from a single source file.
I am still keeping the multi-file plugin support, which Kees Cook
mentioned might be needed by out-of-tree plugins.
(https://lkml.org/lkml/2019/1/11/1107)
If the plugin, foo.so, is compiled from two files foo.c and foo2.c,
then you can do like follows:
foo-objs := foo.o foo2.o
Single-file plugins do not need the *-objs notation.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Alexander A. Klimov [Sun, 19 Jul 2020 19:46:02 +0000 (21:46 +0200)]
kbuild: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Tue, 7 Jul 2020 09:21:17 +0000 (18:21 +0900)]
kbuild: trace functions in subdirectories of lib/
ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE)
exists here in sub-directories of lib/ to keep the behavior of
commit
2464a609ded0 ("ftrace: do not trace library functions").
Since that commit, not only the objects in lib/ but also the ones in
the sub-directories are excluded from ftrace (although the commit
description did not explicitly mention this).
However, most of library functions in sub-directories are not so hot.
Re-add them to ftrace.
Going forward, only the objects right under lib/ will be excluded.
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masahiro Yamada [Tue, 7 Jul 2020 09:21:16 +0000 (18:21 +0900)]
kbuild: introduce ccflags-remove-y and asflags-remove-y
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular
object, but there is no convenient way to do that for every object in
a directory.
Add ccflags-remove-y and asflags-remove-y to make it easily.
Use ccflags-remove-y to clean up some Makefiles.
The add/remove order works as follows:
[1] KBUILD_CFLAGS specifies compiler flags used globally
[2] ccflags-y adds compiler flags for all objects in the
current Makefile
[3] ccflags-remove-y removes compiler flags for all objects in the
current Makefile (New feature)
[4] CFLAGS_<file> adds compiler flags per file.
[5] CFLAGS_REMOVE_<file> removes compiler flags per file.
Having [3] before [4] allows us to remove flags from most (but not all)
objects in the current Makefile.
For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE)
from all objects in the directory, then adds it back to
trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o
The same applies to lib/livepatch/Makefile.
Please note ccflags-remove-y has no effect to the sub-directories.
In contrast, the previous notation got rid of compiler flags also from
all the sub-directories.
The following are not affected because they have no sub-directories:
arch/arm/boot/compressed/
arch/powerpc/xmon/
arch/sh/
kernel/trace/
However, lib/ has several sub-directories.
To keep the behavior, I added ccflags-remove-y to all Makefiles
in subdirectories of lib/, except the following:
lib/vdso/Makefile - Kbuild does not descend into this Makefile
lib/raid/test/Makefile - This is not used for the kernel build
I think commit
2464a609ded0 ("ftrace: do not trace library functions")
excluded too much. In the next commit, I will remove ccflags-remove-y
from the sub-directories of lib/.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit)
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Masahiro Yamada [Wed, 1 Jul 2020 19:29:36 +0000 (04:29 +0900)]
kbuild: do not export LDFLAGS_vmlinux
When you clean the build tree for ARCH=arm, you may see the following
error message from 'nm' command:
$ make -j24 ARCH=arm clean
CLEAN arch/arm/crypto
CLEAN arch/arm/kernel
CLEAN arch/arm/mach-at91
CLEAN arch/arm/mach-omap2
CLEAN arch/arm/vdso
CLEAN certs
CLEAN lib
CLEAN usr
CLEAN net/wireless
CLEAN drivers/firmware/efi/libstub
nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file
/bin/sh: 1: arithmetic expression: expecting primary: " "
CLEAN arch/arm/boot/compressed
CLEAN drivers/scsi
CLEAN drivers/tty/vt
CLEAN arch/arm/boot
CLEAN vmlinux.symvers modules.builtin modules.builtin.modinfo
Even if you rerun the same command, the error message will not be
shown despite vmlinux is already gone.
To reproduce it, the parallel option -j is needed. Single thread
cleaning always executes 'archclean', 'vmlinuxclean' in this order,
so vmlinux still exists when arch/arm/boot/compressed/ is cleaned.
Looking at arch/arm/boot/compressed/Makefile does not help understand
the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are
assigned with '=' operator, hence, they are not expanded unless used.
Obviously, 'make clean' does not use them.
In fact, the root cause exists in the top Makefile:
export LDFLAGS_vmlinux
Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in
arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean
has a command to execute. This is why the error message shows up only
when there exist build artifacts in arch/arm/boot/compressed/.
Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile
will fix it as far as ARCH=arm is concerned, but I think the proper fix
is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile.
LDFLAGS_vmlinux in the top Makefile contains linker flags for the top
vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for
arch/arm/boot/compressed/vmlinux. They just happen to have the same
variable name, but are used for different purposes. Stop shadowing
LDFLAGS_vmlinux.
This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a
command line parameter instead of via an environment variable. LD and
KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway,
they must be included in cmd_link-vmlinux to allow if_changed to detect
the changes in LD or KBUILD_LDFLAGS.
The following Makefiles are not affected:
arch/arm/boot/compressed/Makefile
arch/h8300/boot/compressed/Makefile
arch/nios2/boot/compressed/Makefile
arch/parisc/boot/compressed/Makefile
arch/s390/boot/compressed/Makefile
arch/sh/boot/compressed/Makefile
arch/sh/boot/romimage/Makefile
arch/x86/boot/compressed/Makefile
They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the
top Makefile.
We need to take a closer look at the impact to unicore32 and xtensa.
arch/unicore32/boot/compressed/Makefile only uses '+=' operator for
LDFLAGS_vmlinux. So, the decompressor previously inherited the linker
flags from the top Makefile.
However, commit
70fac51feaf2 ("unicore32 additional architecture files:
boot process") was merged before commit
1f2bfbd00e46 ("kbuild: link of
vmlinux moved to a script"). So, I rather consider this is a bug fix of
1f2bfbd00e46.
arch/xtensa/boot/boot-elf/Makefile is also affected, but this is also
considered a fix for the same reason. It did not inherit LDFLAGS_vmlinux
when commit
4bedea945451 ("[PATCH] xtensa: Architecture support for
Tensilica Xtensa Part 2") was merged. I deleted $(LDFLAGS_vmlinux),
which is now empty.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Masahiro Yamada [Wed, 1 Jul 2020 03:29:51 +0000 (12:29 +0900)]
kbuild: always create directories of targets
Currently, the directories of objects are automatically created
only for O= builds.
It should not hurt to cater to this for in-tree builds too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Sat, 8 Aug 2020 21:16:12 +0000 (14:16 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix tegra194-cpufreq module build failure caused by __cpu_logical_map
not being exported.
- Improve fixed_addresses comment regarding the fixmap buffer sizes.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix __cpu_logical_map undefined issue
arm64/fixmap: make notes of fixed_addresses more precisely
Kefeng Wang [Mon, 27 Jul 2020 15:29:38 +0000 (23:29 +0800)]
arm64: Fix __cpu_logical_map undefined issue
The __cpu_logical_map undefined issue occued when the new
tegra194-cpufreq drvier building as a module.
ERROR: modpost: "__cpu_logical_map" [drivers/cpufreq/tegra194-cpufreq.ko] undefined!
The driver using cpu_logical_map() macro which will expand to
__cpu_logical_map, we can't access it in a drvier. Let's turn
cpu_logical_map() into a C wrapper and export it to fix the
build issue.
Also create a function set_cpu_logical_map(cpu, hwid) when assign
a value to cpu_logical_map(cpu).
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pingfan Liu [Mon, 3 Aug 2020 13:18:40 +0000 (21:18 +0800)]
arm64/fixmap: make notes of fixed_addresses more precisely
These 'compile-time allocated' memory buffers can occupy more than one
page and each enum increment is page-sized. So improve the note about it.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1596460720-19243-1-git-send-email-kernelfans@gmail.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Sat, 8 Aug 2020 16:32:18 +0000 (09:32 -0700)]
Merge tag 'for-linus-5.9-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Minor cleanups to the IPMI driver for 5.9
Nothing of any major consequence. Duplicate code, some missing \n's in
sysfs files, some documentation and comment changes"
* tag 'for-linus-5.9-1' of git://github.com/cminyard/linux-ipmi:
ipmi/watchdog: add missing newlines when printing parameters by sysfs
ipmi: remve duplicate code in __ipmi_bmc_register()
ipmi: ssif: Remove finished TODO comment about SMBus alert
Doc: driver-api: ipmi: Add description of alerts_broken module param
Linus Torvalds [Sat, 8 Aug 2020 04:27:37 +0000 (21:27 -0700)]
Merge tag 'for-v5.9' of git://git./linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- add COOL/WARM/HOT state from JEITA JISC8712:2015 specification
- convert simple-battery DT binding to YAML
- add long-life charging mode
Battery/charger drivers:
- bq25150: new charger driver
- bq27xxx: add support for BQ27z561 and BQ28z610
- max17040: support CAPACITY_ALERT_MIN
- sbs-battery: add PEC support
- wilco-ec: support long-life charging mode
- bq25890: fix DT binding
- misc. fixes and cleanups
Reset drivers:
- linkstation: new reset driver"
* tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
power: supply: wilco_ec: Add long life charging mode
power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor
dt-bindings: power: Add BQ28z610 compatible
power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor
dt-bindings: power: Add BQ27Z561 compatible
power: supply: test_power: Fix battery_current initial value
power: supply: Fix kerneldoc of power_supply_temp2resist_simple()
power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated()
dt-bindings: power: Convert battery.txt to battery.yaml
power: supply: rt5033_battery: Fix error code in rt5033_battery_probe()
power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN
power: supply: check if calc_soc succeeded in pm860x_init_battery
power: supply: bq2xxxx: Replace HTTP links with HTTPS ones
power: reset: add driver for LinkStation power off
power: supply: sc27xx: prevent adc * 1000 from overflow
math64: New DIV_S64_ROUND_CLOSEST helper
power: fix duplicated words in bq2415x_charger.h
power: Convert to DEFINE_SHOW_ATTRIBUTE
power: reset: keystone-reset: Replace HTTP links with HTTPS ones
power: supply: bq25150 introduce the bq25150
...
Linus Torvalds [Sat, 8 Aug 2020 04:14:30 +0000 (21:14 -0700)]
Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"No common topic whatsoever in those, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: define inode flags using bit numbers
iov_iter: Move unnecessary inclusion of crypto/hash.h
dlmfs: clean up dlmfs_file_{read,write}() a bit
Linus Torvalds [Sat, 8 Aug 2020 04:03:25 +0000 (21:03 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs
Pull mount leak fix from Al Viro:
"Regression fix for the syscalls-for-init series - fix a leak of a 'struct path'"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: fix a struct path leak in path_umount
Linus Torvalds [Sat, 8 Aug 2020 01:48:15 +0000 (18:48 -0700)]
Merge tag 'pci-v5.9-changes' of git://git./linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Fix pci_cfg_wait queue locking problem (Bjorn Helgaas)
- Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi
Saheed)
- Align PCIe capability and PCI accessor return values (Bolarinwa
Olayemi Saheed)
- Fix pci_create_slot() reference count leak (Qiushi Wu)
- Announce device after early fixups (Tiezhu Yang)
PCI device hotplug:
- Make rpadlpar functions static (Wei Yongjun)
Driver binding:
- Add device even if driver attach failed (Rajat Jain)
Virtualization:
- xen: Remove redundant initialization of irq (Colin Ian King)
IOMMU:
- Add pci_pri_supported() to check device or associated PF (Ashok Raj)
- Release IVRS table in AMD ACS quirk (Hanjun Guo)
- Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng)
- Treat "external-facing" devices themselves as internal (Rajat Jain)
MSI:
- Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr
Stankiewicz)
Error handling:
- Clear PCIe Device Status errors only if OS owns AER (Jonathan
Cameron)
- Log correctable errors as warning, not error (Matt Jolly)
- Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc
Van Oostenryck)
Peer-to-peer DMA:
- Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe)
ASPM:
- Add missing newline in sysfs 'policy' (Xiongfeng Wang)
Native PCIe controllers:
- Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng)
- Convert to devm_platform_ioremap_resource() (Dejin Zheng)
- Remove duplicate error message from devm_pci_remap_cfg_resource()
callers (Dejin Zheng)
- Fix runtime PM imbalance on error (Dinghao Liu)
- Remove dev_err() when handing an error from platform_get_irq()
(Krzysztof Wilczyński)
- Use pci_host_bridge.windows list directly instead of splicing in a
temporary list for cadence, mvebu, host-common (Rob Herring)
- Use pci_host_probe() instead of open-coding all the pieces for
altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3,
versatile, xgene, xilinx, xilinx-nwl (Rob Herring)
- Default host bridge parent device to the platform device (Rob
Herring)
- Use pci_is_root_bus() instead of tracking root bus number
separately in aardvark, designware (imx6, keystone,
designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob
Herring)
- Set host bridge bus number in pci_scan_root_bus_bridge() instead of
each driver for aardvark, designware-host, host-common, mediatek,
rcar, tegra, v3-semi (Rob Herring)
- Move DT resource setup into devm_pci_alloc_host_bridge() (Rob
Herring)
- Set bridge map_irq and swizzle_irq to default functions; drivers
that don't support legacy IRQs (iproc) need to undo this (Rob
Herring)
ARM Versatile PCIe controller driver:
- Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring)
Cadence PCIe controller driver:
- Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
(Kishon Vijay Abraham I)
- Remove "mem" from reg binding (Kishon Vijay Abraham I)
- Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I)
- Convert all r/w accessors to perform only 32-bit accesses (Kishon
Vijay Abraham I)
- Add support to start link and verify link status (Kishon Vijay
Abraham I)
- Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I)
- Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I)
- Fix updating Vendor ID and Subsystem Vendor ID register (Kishon
Vijay Abraham I)
- Use bridge resources for outbound window setup (Rob Herring)
- Remove private bus number and range storage (Rob Herring)
Cadence PCIe endpoint driver:
- Add MSI-X support (Alan Douglas)
HiSilicon PCIe controller driver:
- Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring)
Intel VMD host bridge driver:
- Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick)
Loongson PCIe controller driver:
- Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang)
Marvell Aardvark PCIe controller driver:
- Indicate error in 'val' when config read fails (Pali Rohár)
- Don't touch PCIe registers if no card connected (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Setup BAR0 in order to fix MSI (Shmuel Hazan)
Microsoft Hyper-V host bridge driver:
- Fix a timing issue which causes kdump to fail occasionally (Wei Hu)
- Make some functions static (Wei Yongjun)
NVIDIA Tegra PCIe controller driver:
- Revert tegra124 raw_violation_fixup (Nicolas Chauvet)
- Remove PLL power supplies (Thierry Reding)
Qualcomm PCIe controller driver:
- Change duplicate PCI reset to phy reset (Abhishek Sahu)
- Add missing ipq806x clocks in PCIe driver (Ansuel Smith)
- Add missing reset for ipq806x (Ansuel Smith)
- Add ext reset (Ansuel Smith)
- Use bulk clk API and assert on error (Ansuel Smith)
- Add support for tx term offset for rev 2.1.0 (Ansuel Smith)
- Define some PARF params needed for ipq8064 SoC (Ansuel Smith)
- Add ipq8064 rev2 variant (Ansuel Smith)
- Support PCI speed set for ipq806x (Sham Muthayyan)
Renesas R-Car PCIe controller driver:
- Use devm_pci_alloc_host_bridge() (Rob Herring)
- Use struct pci_host_bridge.windows list directly (Rob Herring)
- Convert rcar-gen2 to use modern host bridge probe functions (Rob
Herring)
TI J721E PCIe driver:
- Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I)
Xilinx Versal CPM PCIe controller driver:
- Add Versal CPM Root Port driver and YAML schema (Bharat Kumar
Gogada)
MicroSemi Switchtec management driver:
- Add missing __iomem and __user tags to fix sparse warnings (Logan
Gunthorpe)
Miscellaneous:
- Replace http:// links with https:// (Alexander A. Klimov)
- Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn
Helgaas)
- Remove unused pci_lost_interrupt() (Heiner Kallweit)
- Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen)
- Fix kerneldoc warnings (Krzysztof Kozlowski)"
* tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
PCI: Fix kerneldoc warnings
PCI: xilinx-cpm: Add Versal CPM Root Port driver
PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port
PCI: Set bridge map_irq and swizzle_irq to default functions
PCI: Move DT resource setup into devm_pci_alloc_host_bridge()
PCI: rcar-gen2: Convert to use modern host bridge probe functions
PCI: Remove dev_err() when handing an error from platform_get_irq()
MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
misc: pci_endpoint_test: Add J721E in pci_device_id table
PCI: j721e: Add TI J721E PCIe driver
PCI: switchtec: Add missing __iomem tag to fix sparse warnings
PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings
PCI: rpadlpar: Make functions static
PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs
PCI: Release IVRS table in AMD ACS quirk
PCI: Announce device after early fixups
PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken
PCI: Remove unused pci_lost_interrupt()
dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
...
Linus Torvalds [Sat, 8 Aug 2020 01:29:15 +0000 (18:29 -0700)]
Merge tag 'trace-v5.9' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- The biggest news in that the tracing ring buffer can now time events
that interrupted other ring buffer events.
Before this change, if an interrupt came in while recording another
event, and that interrupt also had an event, those events would all
have the same time stamp as the event it interrupted.
Now, with the new design, those events will have a unique time stamp
and rightfully display the time for those events that were recorded
while interrupting another event.
- Bootconfig how has an "override" operator that lets the users have a
default config, but then add options to override the default.
- A fix was made to properly filter function graph tracing to the
ftrace PIDs. This came in at the end of the -rc cycle, and needs to
be backported.
- Several clean ups, performance updates, and minor fixes as well.
* tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (39 commits)
tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers
kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE
tracing: Use trace_sched_process_free() instead of exit() for pid tracing
bootconfig: Fix to find the initargs correctly
Documentation: bootconfig: Add bootconfig override operator
tools/bootconfig: Add testcases for value override operator
lib/bootconfig: Add override operator support
kprobes: Remove show_registers() function prototype
tracing/uprobe: Remove dead code in trace_uprobe_register()
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler
ftrace: Fix ftrace_trace_task return value
tracepoint: Use __used attribute definitions from compiler_attributes.h
tracepoint: Mark __tracepoint_string's __used
trace : Have tracing buffer info use kvzalloc instead of kzalloc
tracing: Remove outdated comment in stack handling
ftrace: Do not let direct or IPMODIFY ftrace_ops be added to module and set trampolines
ftrace: Setup correct FTRACE_FL_REGS flags for module
tracing/hwlat: Honor the tracing_cpumask
tracing/hwlat: Drop the duplicate assignment in start_kthread()
tracing: Save one trace_event->type by using __TRACE_LAST_TYPE
...
Michael Ellerman [Fri, 7 Aug 2020 23:12:03 +0000 (09:12 +1000)]
powerpc/ptrace: Fix build error in pkey_get()
The merge resolution in commit
25d8d4eecace left ret no longer used,
leading to:
arch/powerpc/kernel/ptrace/ptrace-view.c: In function ‘pkey_get’:
arch/powerpc/kernel/ptrace/ptrace-view.c:473:6: error: unused variable ‘ret’
473 | int ret;
Fix it by removing ret.
Fixes:
25d8d4eecace ("Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Torokhov [Fri, 7 Aug 2020 23:41:01 +0000 (16:41 -0700)]
Merge branch 'next' into for-linus
Prepare input updates for 5.9 merge window.
Christoph Hellwig [Thu, 6 Aug 2020 14:07:10 +0000 (16:07 +0200)]
fs: fix a struct path leak in path_umount
Make sure we also put the dentry and vfsmnt in the illegal flags
and !may_umount cases.
Fixes:
41525f56e256 ("fs: refactor ksys_umount")
Reported-by: Vikas Kumar <vikas.kumar2@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Steven Rostedt (VMware) [Thu, 6 Aug 2020 16:46:49 +0000 (12:46 -0400)]
tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers
As trace_array_printk() used with not global instances will not add noise to
the main buffer, they are OK to have in the kernel (unlike trace_printk()).
This require the subsystem to create their own tracing instance, and the
trace_array_printk() only writes into those instances.
Add trace_array_init_printk() to initialize the trace_printk() buffers
without printing out the WARNING message.
Reported-by: Sean Paul <sean@poorly.run>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>