Input: hideep - optionally reset controller work mode to native HiDeep protocol

The HiDeep IST940E touchscreen controller used on the Lenovo Yoga Book X90F
convertible comes up in HID mode by default.

This works well on the X91F Windows model where the touchscreen is
correctly described in ACPI and ACPI takes care of controlling
the reset GPIO and regulators.

But the X90F ships with Android and the ACPI tables on this model don't
describe the touchscreen. Instead this is hardcoded in the vendor kernel.

The vendor kernel uses the touchscreen in native HiDeep 20 (2.0?) protocol
mode and switches the controller to this mode by writing 0 to reg 0x081e.

Adjusting the i2c-hid code to deal with the reset-gpio and regulators on
this non devicetree (but rather broken ACPI) convertible is somewhat tricky
and the native protocol reports ABS_MT_PRESSURE and ABS_MT_TOUCH_MAJOR
which are not reported in HID mode, so it is preferable to use the native
mode.

Add support to the hideep driver to reset the work-mode to the native
HiDeep protocol to allow using it on the Lenovo Yoga Book X90F.
This is guarded behind a new "hideep,force-native-protocol" boolean
property, to avoid changing behavior on other devices.

For the record: I did test using the i2c-hid driver with some quick hacks
and it does work. The I2C-HID descriptor is available from address 0x0020,
just like on the X91F Windows model.

So far the new "hideep,force-native-protocol" property is only used on
x86/ACPI (non devicetree) devs. IOW it is not used in actual devicetree
files. The devicetree-bindings maintainers have requested properties like
these to not be added to the devicetree-bindings, so the new property is
deliberately not added to the existing devicetree-bindings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230311114726.182789-3-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: hideep - silence error in SW_RESET()

On some models the first HIDEEP_SYSCON_WDT_CON write alone is enough to
cause the controller to reset, causing the second write to fail:

i2c-hideep_ts: write to register 0x52000014 (0x000001) failed: -121

Switch this write to a raw hideep_pgm_w_mem() to avoid an error getting
logged in this case.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230311114726.182789-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: hideep - clean up some inconsistent indenting

Turn the space into a tab to Eliminate the follow smatch warning:
drivers/input/touchscreen/hideep.c:470 hideep_program_nvm() warn:
inconsistent indenting

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220429070103.4747-1-yang.lee@linux.alibaba.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: matrix_keypad - replace header inclusions by forward declarations

When the data structure is only referred by pointer, compiler may not need
to see the contents of the data type. Thus, we may replace header inclusions
by respective forward declarations.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220923184632.2157-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

ARM: spitz: include header defining input event codes

The board file for Sharp SL-Cxx00 Series of PDAs uses various KEY_*
defines, but does not include the relevant header directly and instead
relies on other headers to include it indirectly. With the upcoming
cleanup of matrix_keypad.h this indirection is now broken and we should
include the relevant header directly.

Reported: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Y/U+3PZsbLw++SnG@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: hp_sdc_rtc - mark an unused function as __maybe_unused

When CONFIG_PROC_FS is not set, one procfs-related function is not
used, causing a build error or warning.
Mark this function as __maybe_unused to quieten the build.

../drivers/input/misc/hp_sdc_rtc.c:268:12: warning: 'hp_sdc_rtc_proc_show' defined but not used [-Wunused-function]
  268 | static int hp_sdc_rtc_proc_show(struct seq_file *m, void *v)
      |            ^~~~~~~~~~~~~~~~~~~~

Fixes: c18bd9a1ff47 ("hp_sdc_rtc: Don't use create_proc_read_entry()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230209010125.23690-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: google,cros-ec-keyb: Fix spelling error

The dependency had an obvious spelling error. Fix it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230220135531.1987351-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: gpio-keys - add support for linux,input-value DTS property

Allows setting the value of EV_ABS events from DTS.
This property is included in the gpio-keys.yaml scheme, but was only
implemented for gpio-keys-polled.

Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/3519a11b0ef5324a2befbd137cd2aa0cb8fd057d.1676850819.git.soyer@irl.hu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: bbnsm_pwrkey - add bbnsm power key support

The ON/OFF logic inside the BBNSM allows for connecting directly
into a PMIC or other voltage regulator device. The module has an
button input signal and a wakeup request input signal. It also
has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an
active-low PMIC enable (pmic_en_b) output.

Add the power key support for the ON/OFF button function found in
BBNSM module.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230215024117.3357341-2-ping.bai@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: input: iqs626a: Redefine trackpad property types

Following a recent refactor of the driver to properly drop unused
device nodes, the driver expects trackpad channel touch thresholds
and ATI base values to be specified under single trackpad channel
child nodes.

This enhancement moves both properties to scalar values as opposed
to arrays, making their types consistent across bindings.

Fixes: a8f1f0dc865c ("dt-bindings: input: Add bindings for Azoteq IQS626A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Y9RQcddToBr1rrnJ@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: iqs626a - drop unused device node references

Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.

Currently, the driver never calls fwnode_handle_put(); this patch
adds the missing calls. Because fwnode_handle_put() does not take
a const *fwnode_handle, the const qualifier is removed across all
corresponding *fwnode_handle instances.

As part of this change, trackpad channel touch thresholds and ATI
base values are now specified under single trackpad channel child
nodes. This enhancement moves both properties to scalar values as
opposed to arrays, making their types consistent across bindings.

Fixes: f1d2809de97a ("Input: Add support for Azoteq IQS626A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Y9RQVe/V1Hnw1oly@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: input: touchscreen: st,stmfts: convert to dtschema

Convert the ST-Microelectronics FingerTip touchscreen controller
bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230127202040.196411-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: cyttsp5 - fix bitmask for touch buttons

Prior to this patch, the bitmask ends up being 0x3, as opposed to 0x1
which likely was the intention. The erroneous bit results in the driver
reporting 2 different button activations in designs with 2 or more
buttons.

To detect which button has been pressed, cyttsp5_btn_attention() uses a
for loop to iterate through the input buffer, while shifting and
applying a bitmask to determine the state for each button.
Unfortunately, when the bitmask is 0x3 and there are multiple buttons,
this procedure falls apart.

Consider a design with 3 buttons. Pressing the third button will result
in a call to cyttsp5_btn_attention() with the input buffer containing
0x4 (binary 0100). In the first iteration of the for loop cur_btn_state
will be:

(0x4 >> 0 * 1) & 0x3 = 0x4 & 0x3 = 0x0

This is correct. However, in the next iteration this happens:

(0x4 >> 1 * 1) & 0x3 = 0x2 & 0x3 = 0x2

Which means that a key event for key 1 is generated, even though it's
not really active. In the third iteration, the loop detects the button
that was actually pressed:

(0x4 >> 2 * 1) & 0x3 = 0x1 & 0x3 = 0x1

This key event is the only one that should have been detected, but it is
accompanied by the preceding key. Ensuring the applied mask is 0x1
solves this problem.

Signed-off-by: Richard Kjerstadius <richard.kjerstadius@teledyne.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20230127102903.3317089-1-richard.kjerstadius@teledyne.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: exc3000 - properly stop timer on shutdown

We need to stop the timer on driver unbind or probe failures, otherwise
we get UAF/Oops.

Fixes: 7e577a17f2ee ("Input: add I2C attached EETI EXC3000 multi touch driver")
Reported-by: "Stahl, Michael" <mstahl@moba.de>
Link: https://lore.kernel.org/r/Y9dK57BFqtlf8NmN@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: synaptics-rmi4 - fix SPI device ID

Currently, the ID being set to "rmi4_spi" causes this warning:
"SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi"

Change the ID to rmi4-spi to stop this warning.

Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Link: https://lore.kernel.org/r/20221219133717.1638496-1-rayyan@ansari.sh
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: cap11xx - add support for cap1203, cap1293 and cap1298

Add basic support for more CAP1xxx sensors.
All models from CAP1xxx family are register-compatible.
Some advanced features are not used and disabled by default.

Reported-by: kernel test robot <lkp@xxxxxxxxx>
Signed-off-by: Jiri Valek - 2N <jiriv@axis.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20230111131111.475270-3-jiriv@axis.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298

Add support for cap1203, cap1293 and cap1298.

Signed-off-by: Jiri Valek - 2N <jiriv@axis.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230111131111.475270-2-jiriv@axis.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation

Correct a spelling mistake (reported by codespell).
Also hyphenate "matrix-based".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230124233453.22893-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: edt-ft5x06 - fix typo in a comment

Replace 'firmares' with 'firmwares'.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230128162325.64467-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: tegra-kbc - use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301281613032191431@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: st-keyscan - use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301281611305841413@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: spear-keyboard - use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301281609576851394@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: olpc_apsp - use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301281608287301370@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: arc_ps2 - use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301281606309671328@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: apbps2 - use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301281604596831304@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: altera_ps2 - use devm_platform_get_and_ioremap_resource()

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301281603290601283@zte.com.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ads7846 - don't check penirq immediately for 7845

To discard false readings, one should use "ti,penirq-recheck-delay-usecs".
Checking get_pendown_state() at the beginning, most of the time fails
causing malfunctioning.

Fixes: ffa458c1bd9b ("spi: ads7846 driver")
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230126105227.47648-4-l.ellero@asem.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ads7846 - always set last command to PWRDOWN

Controllers that report pressure (e.g. ADS7846) use 5 commands and the
correct sequence is READ_X, READ_Y, READ_Z1, READ_Z2, PWRDOWN.

Controllers that don't report pressure (e.g. ADS7845/ADS7843) use only 3
commands and the correct sequence should be READ_X, READ_Y, PWRDOWN. But
the sequence sent was incorrect: READ_X, READ_Y, READ_Z1.

Fix this by setting the third (and last) command to PWRDOWN.

Fixes: ffa458c1bd9b ("spi: ads7846 driver")
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230126105227.47648-3-l.ellero@asem.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ads7846 - don't report pressure for ads7845

ADS7845 doesn't support pressure.
Avoid the following error reported by libinput-list-devices:
"ADS7845 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE".

Fixes: ffa458c1bd9b ("spi: ads7846 driver")
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230126105227.47648-2-l.ellero@asem.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: xpad - add 8BitDo Pro 2 Wired Controller support

Add VID and PID to the xpad_device table to allow driver
to use the 8BitDo Pro 2 Wired Controller, which is
XTYPE_XBOX360 compatible by default.

Signed-off-by: John Butler <radon86dev@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20230124005206.80706-1-radon86dev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ipaq-micro-ts - fix DEFINE_SIMPLE_DEV_PM_OPS typo

The previous change was not properly build tested and needs
a trivial spelling change:

ipaq-micro-ts.c:146:8: error: type defaults to 'int' in declaration of 'DEFINE_SIMPLE_DEV_PM' [-Werror=implicit-int]

Fixes: 144ff5e03d74 ("Input: ipaq-micro-ts - use DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230117164539.1631336-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: wistron_btns - use pm_sleep_ptr() to allow removal of ifdef CONFIG_PM guards

As the guards only apply to suspend and resume, #ifdef CONFIG_PM_SLEEP
would have been a tighter protection. As pm_sleep_ptr() lets the compiler
see the protected ops structure and callbacks but also lets the compiler
remove it as unused code if !CONFIG_PM_SLEEP this allows the #ifdef
guards to be removed, slightly simplifying the resulting code.

--
It seems likely that DEFINE_SIMPLE_DEV_PM_OPS() would work here but
I'd prefer not to make that change unless someone can confirm that the
extra callbacks registered will have no unwanted side effects in this
driver.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230114171620.42891-17-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: cma3000 - use pm_sleep_ptr() to allow removal of ifdef CONFIG_PM guards

As the guards only apply to suspend and resume, #ifdef CONFIG_PM_SLEEP
would have been a tighter protection. As pm_sleep_ptr() lets the compiler
see the protected ops structure and callbacks but also lets the compiler
remove it as unused code if !CONFIG_PM_SLEEP this allows the #ifdef
guards to be removed, slightly simplifying the resulting code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
It seems likely that DEFINE_SIMPLE_DEV_PM_OPS() would work here but
I'd prefer not to make that change unless someone can confirm that the
extra callbacks registered will have no unwanted side effects in this
driver.

Link: https://lore.kernel.org/r/20230114171620.42891-16-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: Use pm_sleep_ptr() to avoid need for ifdef CONFIG_PM_SLEEP

As the new pm_sleep_ptr() macro lets the compiler see the code, but
then remove it if !CONFIG_PM_SLEEP it can be used to avoid the need
for #ifdef guards.  Use that in the input core to simplify the code
a little.  Note pm_sleep_ptr() has not been applied to each callback
in the ops structure because the pm_sleep_ptr() at the usage site
is sufficient.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230114171620.42891-15-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: omap4-keyad - use pm_ptr() and RUNTIME_DEV_PM_OPS()

SET_RUNTIME_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_ptr()
and RUNTIME_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Note that DEFINE_RUNTIME_DEV_PM_OPS() is not used because that adds
additional callbacks for suspend and resume and would need
testing.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230114171620.42891-14-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: applespi - use pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS()

SET_SYSTEM_SLEEP_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and SYSTEM_SLEEP_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

In this case we also have a .poweroff_late() callback. Whilst not
strictly necessary, to future proof against relaxation of the protection
of the main driver.pm = pm_sleep_ptr() protect this pointer with
pm_sleep_ptr() as would be done if the LATE_SYSTEM_SLEEP_PM_OPS()
macro were used to set it.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230114171620.42891-13-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: cyttsp - use EXPORT_GPL_SIMPLE_DEV_PM_OPS()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and EXPORT_GPL_SIMPLE_DEV_PMU_OPS() allows the compiler to see the
functions, thus suppressing the warning, but still allowing the unused
code to be removed. Thus also drop the __maybe_unused markings.
It also rolls in the EXPORT_SYMBOL() so that we only export it
if CONFIG_PM_SLEEP.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230114171620.42891-12-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: cyttsp4 - use EXPORT_GPL_RUNTIME_DEV_PM_OPS()

SET_SYSTEM_SLEEP_PM_OPS() and RUNTIME_PM_OPS() are deprecated as
they requires explicit protection against unused function warnings.
The new combination of pm_ptr() EXPORT_GPL_RUNTIME_DEV_PM_OPS()
allows the compiler to see the functions, thus suppressing the
warning, but still allowing the unused code to be
removed. Thus also drop the #ifdef guards.

Note that we are replacing an unconditional call to the suspend
and resume functions for sleep use cases with one via
pm_runtime_force_suspend() / pm_runtime_force_resume() that only
do anything to the device if we are not already in the appropriate
runtime suspended state.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--

I 'think' this should be fine in that it can only reduce the number
of unnecessary suspends.  If anyone can test that would be great.

Link: https://lore.kernel.org/r/20230114171620.42891-11-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: tsc200x - use EXPORT_GPL_SIMPLE_DEV_PM_OPS()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and EXPORT_GPL_SIMPLE_DEV_PM_OPS() allows the compiler to see the
functions, thus suppressing the warning, but still allowing the unused
code to be removed. Thus also drop the __maybe_unused markings.
This function also removes the need for separate EXPORT_SYMBOL_GPL()

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230114171620.42891-10-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: adxl34x - unify dev_pm_ops using EXPORT_SIMPLE_DEV_PM_OPS()

The I2C and SPI PM callbacks were identical (though wrapped in some
bouncing out to the bus specific container of the struct device and
then back again to get the drvdata).  As such rather than just moving
these to SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() take the opportunity
to unify the struct dev_pm_ops and use the new EXPORT_SIMPLE_DEV_PM_OPS()
macro so that we can drop the unused suspend and resume callbacks as well
as the structure if !CONFIG_PM_SLEEP without needing to mark the callbacks
__maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20230114171620.42891-9-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ad714x - unify dev_pm_ops using EXPORT_SIMPLE_DEV_PM_OPS()

The I2C and SPI PM callbacks were identical (though wrapped in some
bouncing out to the bus specific container of the struct device and
then back again to get the drvdata). As such rather than just moving
these to SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() take the opportunity
to unify the struct dev_pm_ops and use the new EXPORT_SIMPLE_DEV_PM_OPS()
macro so that we can drop the unused suspend and resume callbacks as well
as the structure if !CONFIG_PM_SLEEP without needing to mark the callbacks
__maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20230114171620.42891-8-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: stmfts - switch to SYSTEM_SLEEP_/RUNTIME_PM_OPS() and pm_ptr()

SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() are deprecated as
they require explicit protection against unused function warnings.
The new combination of pm_ptr() and SYSTEM_SLEEP_PM_OPS()/
RUNTIME_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andi Shyti <andi@etezian.org>
Link: https://lore.kernel.org/r/20230114171620.42891-7-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: rmi4 - switch to SYSTEM_SLEEP/RUNTIME_PM_OPS() and pm_ptr()

SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() are deprecated
as they requires explicit protection against unused function warnings.
The new combination of pm_ptr() and SYSTEM_SLEEP_PM_OPS() /
RUNTIME_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to
be removed. Thus also drop the #ifdef guards.

Whilst all 3 sets of callbacks are similar, there are small differences
that make it challenging to use a single pm_dev_ops structure - hence
leave the duplication as it stands.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Andrew Duggan <aduggan@synaptics.com>
Link: https://lore.kernel.org/r/20230114171620.42891-6-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: s6sy761 - switch to SYSTEM_SLEEP_/RUNTIME_PM_OPS() and pm_ptr()

SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() are deprecated as
they require explicit protection against unused function warnings.
The new combination of pm_ptr() and SYSTEM_SLEEP_PM_OPS()/
RUNTIME_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Caleb Connolly <caleb@connolly.tech>
Cc: Andi Shyti <andi@etezian.org>
Tested-by: Caleb Connolly <caleb@connolly.tech> # oneplus-guacamole
Link: https://lore.kernel.org/r/20230114171620.42891-5-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: samsung-keypad - switch to pm_ptr() and SYSTEM_SLEEP/RUNTIME_PM_OPS()

The SET_ variants are deprecated as they require explicit protection
against unused function warnings.  The new combination of pm_ptr()
and SYSTEM_SLEEP/RUNTIME_DEV_PM_OPS() allow the compiler to see the
functions, thus suppressing the warning, but still allowing the unused
code to be removed. Thus also drop the #ifdef guards.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230114171620.42891-4-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: axp20x-pek - switch to SYSTEM_SLEEP_PM_OPS() and pm_sleep_ptr()

SET_SYSTEM_SLEEP_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and SYSTEM_SLEEP_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.  Here the
additional .resume_noirq callback is protected with pm_sleep_ptr(). This
isn't strictly necessary but is done for consistency with the other
callbacks.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230114171620.42891-3-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: cyapa - switch to SYSTEM_SLEEP/RUNTIME_PM_OPS() and pm_ptr()

SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() are deprecated as
they require explicit protection against unused function warnings.
The new combination of pm_ptr() and SYSTEM_SLEEP_PM_OPS()/
RUNTIME_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230114171620.42891-2-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: cros_ec_keyb - add 3 buttons for monitor function

Add 3 extra buttons: 'brightness up', 'brightness down'
and 'screen lock' to support monitor manipulating function.

Signed-off-by: Joe Wu <joewu@msi.com>
Link: https://lore.kernel.org/r/e23628e2cb464d238eb1c33a9e1e516b@msi.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: iqs269a - do not poll during ATI

After initial start-up, the driver triggers ATI (calibration) with
the newly loaded register configuration in place. Next, the driver
polls a register field to ensure ATI completed in a timely fashion
and that the device is ready to sense.

However, communicating with the device over I2C while ATI is under-
way may induce noise in the device and cause ATI to fail. As such,
the vendor recommends not to poll the device during ATI.

To solve this problem, let the device naturally signal to the host
that ATI is complete by way of an interrupt. A completion prevents
the device from successfully probing until this happens.

As an added benefit, initial switch states are now reported in the
interrupt handler at the same time ATI status is checked. As such,
duplicate code that reports initial switch states has been removed
from iqs269_input_init().

The former logic that scaled ATI timeout and filter settling delay
is not carried forward with the new implementation, as it produces
overly conservative delays at the lower clock rate.

Rather, a single timeout that covers both clock rates is used. The
filter settling delay does not happen to be necessary and has been
removed as well.

Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y7RtB2T7AF9rYMjK@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: iqs269a - do not poll during suspend or resume

Polling the device while it transitions from automatic to manual
power mode switching may keep the device from actually finishing
the transition. The process appears to time out depending on the
polling rate and the device's core clock frequency.

This is ultimately unnecessary in the first place; instead it is
sufficient to write the desired mode during initialization, then
disable automatic switching at suspend. This eliminates the need
to ensure the device is prepared for a manual change and removes
the 'suspend_mode' variable.

Similarly, polling the device while it transitions from one mode
to another under manual control may time out as well. This added
step does not appear to be necessary either, so drop it.

Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y7Rs+eEXlRw4Vq57@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: iqs269a - configure device with a single block write

Unless it is being done as part of servicing a soft reset interrupt,
configuring channels on-the-fly (as is the case when writing to the
ati_trigger attribute) may cause GPIO3 (which reflects the state of
touch for a selected channel) to be inadvertently asserted.

To solve this problem, follow the vendor's recommendation and write
all channel configuration as well as the REDO_ATI register field as
part of a single block write. This ensures the device has been told
to re-calibrate itself following an I2C stop condition, after which
sensing resumes and GPIO3 may be asserted.

Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y7Rs8GyV7g0nF5Yy@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: iqs269a - increase interrupt handler return delay

The time the device takes to deassert its RDY output following an
I2C stop condition scales with the core clock frequency.

To prevent level-triggered interrupts from being reasserted after
the interrupt handler returns, increase the time before returning
to account for the worst-case delay (~140 us) plus margin.

Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y7Rs484ypy4dab5G@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: iqs269a - drop unused device node references

Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.

Currently, the driver does not call fwnode_handle_put() on nested
event nodes. This patch solves this problem by adding the missing
instances of fwnode_handle_put().

As part of this change, the logic which parses each channel's key
code is gently refactored in order to reduce the number of places
from which fwnode_handle_put() is called.

Fixes: 04e49867fad1 ("Input: add support for Azoteq IQS269A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Y7Rsx68k/gvDVXAt@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.

Input: ipaq-micro-ts - use DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

This driver never used the older SIMPLE_DEV_PM_OPS() but instead just
set two of the callbacks directly.  Skip that deprecated macro and go
straight to the new form that avoids the need for guarding or marking
callbacks __maybe_unused.

--
It is possible there is some subtle reason why only two of the
callbacks normally set by SIMPLE_DEV_PM_OPS() are set. As such,
this one needs some closer reading than many of the others.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-70-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: zinitix - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-69-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: zforce_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-68-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: wm97xx - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-67-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: wdt87xx_i2c - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-66-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: wacom_i2c - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-65-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ucb1400_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-64-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ti_am335x_tsc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-63-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: surface3_spi - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Stephen Just <stephenjust@gmail.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-62-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: st1232 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: John Keeping <john@metanate.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-61-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: silead - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-60-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: raydium_i2c_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-59-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: pixcir_i2c_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-58-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: msg2638 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Vincent Knecht <vincent.knecht@mailoo.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-57-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: mms114 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-56-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

input: migor_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-55-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: melfas_mip4 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sangwon Jee <jeesw@melfas.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-54-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: mcs5000_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-53-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: iqs5xx - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-52-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: imx6ul_tsc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-51-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: imagis - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Markuss Broks <markuss.broks@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-50-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ilitek_ts_i2c - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joe Hung <joe_hung@ilitek.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-49-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: hideep - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Anthony Kim <anthony.kim@hideep.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-48-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: goodix - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-47-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: elants_i2c - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-46-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

input: ektf2127 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-45-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: egalax_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-44-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: eeti_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Daniel Mack <daniel@zonque.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-43-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: edt-ft5x06 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-42-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: cy8ctmg110_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-41-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: cy8ctma140 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-40-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: chipone_icn8505 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-39-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: chipone_in8318 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the #ifdef guards.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-38-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: bu21029 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Zhu Yi <yi.zhu5@cn.bosch.com>
Cc: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-37-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: bu21013_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-36-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: auo-pixcir-ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-35-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: atmel_mxt_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-34-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ar1021 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-33-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ads7846 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-32-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ad7877 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-31-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ambakmi - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-30-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: synaptics_i2c - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-29-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: navpoint - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-28-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: elan_i2c_core - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Raul E Rangel <rrangel@chromium.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-27-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: twl6030-vibra - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-26-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: twl4030-vibra - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection
against unused function warnings.  The new combination of pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to be
removed. Thus also drop the __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102181842.718010-25-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>