arch: um: Mark the stack non-executable to fix a binutils warning

[ Upstream commit bd71558d585ac61cfd799db7f25e78dca404dd7a ]

Since binutils 2.39, ld will print a warning if any stack section is
executable, which is the default for stack sections on files without a
.note.GNU-stack section.

This was fixed for x86 in commit ffcf9c5700e4 ("x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments"),
but remained broken for UML, resulting in several warnings:

/usr/bin/ld: warning: arch/x86/um/vdso/vdso.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: vmlinux has a LOAD segment with RWX permissions

Link both the VDSO and vmlinux with -z noexecstack, fixing the warnings
about .note.GNU-stack sections. In addition, pass --no-warn-rwx-segments
to dodge the remaining warnings about LOAD segments with RWX permissions
in the kallsyms objects. (Note that this flag is apparently not
available on lld, so hide it behind a test for BFD, which is what the
x86 patch does.)

Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ffcf9c5700e49c0aee42dcba9a12ba21338e8136
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Cleanup compiler warning in arch/x86/um/tls_32.c

[ Upstream commit d27fff3499671dc23a08efd01cdb8b3764a391c4 ]

arch.tls_array is statically allocated so checking for NULL doesn't
make sense. This causes the compiler warning below.

Remove the checks to silence these warnings.

../arch/x86/um/tls_32.c: In function 'get_free_idx':
../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
   68 |         if (!t->arch.tls_array)
      |             ^
In file included from ../arch/x86/um/asm/processor.h:10,
                 from ../include/linux/rcupdate.h:30,
                 from ../include/linux/rculist.h:11,
                 from ../include/linux/pid.h:5,
                 from ../include/linux/sched.h:14,
                 from ../arch/x86/um/tls_32.c:7:
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
   22 |         struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
      |                               ^~~~~~~~~
../arch/x86/um/tls_32.c: In function 'get_tls_entry':
../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
  243 |         if (!t->arch.tls_array)
      |             ^
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
   22 |         struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
      |                               ^~~~~~~~~

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Cleanup syscall_handler_t cast in syscalls_32.h

[ Upstream commit 61670b4d270c71219def1fbc9441debc2ac2e6e9 ]

Like in f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9
"um: Cleanup syscall_handler_t definition/cast, fix warning",
remove the cast to to fix the compiler warning.

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/hdmi: Fix the converter reuse for the silent stream

[ Upstream commit 5f80d6bd2b01de4cafac3302f58456bf860322fc ]

When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.

If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.

Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: marvell: prestera: add support for for Aldrin2

[ Upstream commit 9124dbcc2dd6c51e81f97f63f7807118c4eb140a ]

Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support.

Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
V2:
  - retarget to net tree instead of net-next;
  - fix missed colon in patch subject ('net marvell' vs 'net: mavell');
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ieee802154: fix uninit value bug in dgram_sendmsg

[ Upstream commit 94160108a70c8af17fa1484a37e05181c0e094af ]

There is uninit value bug in dgram_sendmsg function in
net/ieee802154/socket.c when the length of valid data pointed by the
msg->msg_name isn't verified.

We introducing a helper function ieee802154_sockaddr_check_size to
check namelen. First we check there is addr_type in ieee802154_addr_sa.
Then, we check namelen according to addr_type.

Also fixed in raw_bind, dgram_bind, dgram_connect.

Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Fix a UAF bug in __qedf_probe()

[ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ]

In __qedf_probe(), if qedf->cdev is NULL which means
qed_ops->common->probe() failed, then the program will goto label err1, and
scsi_host_put() will free lport->host pointer. Because the memory qedf
points to is allocated by libfc_host_alloc(), it will be freed by
scsi_host_put(). However, the if statement below label err0 only checks
whether qedf is NULL but doesn't check whether the memory has been freed.
So a UAF bug can occur.

There are two ways to reach the statements below err0. The first one is
described as before, "qedf" should be set to NULL. The second one is goto
"err0" directly. In the latter scenario qedf hasn't been changed and it has
the initial value NULL. As a result the if statement is not reachable in
any situation.

The KASAN logs are as follows:

[    2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0
[    2.312969]
[    2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    2.312969] Call Trace:
[    2.312969]  dump_stack_lvl+0x59/0x7b
[    2.312969]  print_address_description+0x7c/0x3b0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  __kasan_report+0x160/0x1c0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  kasan_report+0x4b/0x70
[    2.312969]  ? kobject_put+0x25d/0x290
[    2.312969]  kasan_check_range+0x2ca/0x310
[    2.312969]  __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  ? selinux_kernfs_init_security+0xdc/0x5f0
[    2.312969]  ? trace_rpm_return_int_rcuidle+0x18/0x120
[    2.312969]  ? rpm_resume+0xa5c/0x16e0
[    2.312969]  ? qedf_get_generic_tlv_data+0x160/0x160
[    2.312969]  local_pci_probe+0x13c/0x1f0
[    2.312969]  pci_device_probe+0x37e/0x6c0

Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Co-developed-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer

[ Upstream commit 02181e68275d28cab3c3f755852770367f1bc229 ]

Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc".

But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt
contain compatible = "moxa,moxart-sdhci".

Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver.

Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different
controller from FTSDC010.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Link: https://lore.kernel.org/r/20220907175341.1477383-1-saproj@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure

[ Upstream commit 8f2b6bc79c32f0fa60df000ae387a790ec80eae9 ]

The driver does not handle the failure case while calling
dma_set_mask_and_coherent API.

In case of failure, capture the return value of API and then report an
error.

Addresses-coverity: Unchecked return value (CHECKED_RETURN)

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property

[ Upstream commit 462bce790e6a7e68620a4ce260cc38f7ed0255d5 ]

Free the allocated resources for missing xlnx,num-fstores property.

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling

[ Upstream commit 91df7751eb890e970afc08f50b8f0fa5ea39e03d ]

Add missing cleanup in devm_platform_ioremap_resource().
When probe fails remove dma channel resources and disable clocks in
accordance with the order of resources allocated .

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-2-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Add SCMI PM driver remove routine

[ Upstream commit dea796fcab0a219830831c070b8dc367d7e0f708 ]

Currently, when removing the SCMI PM driver not all the resources
registered with genpd subsystem are properly de-registered.

As a side effect of this after a driver unload/load cycle you get a
splat with a few warnings like this:

 | debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present!
 | debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present!

Add a proper scmi_pm_domain_remove callback to the driver in order to
take care of all the needed cleanups not handled by devres framework.

Link: https://lore.kernel.org/r/20220817172731.1185305-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Harden accesses to the sensor domains

[ Upstream commit 76f89c954788763db575fb512a40bd483864f1e9 ]

Accessing sensor domains descriptors by the index upon the SCMI drivers
requests through the SCMI sensor operations interface can potentially
lead to out-of-bound violations if the SCMI driver misbehave.

Add an internal consistency check before any such domains descriptors
accesses.

Link: https://lore.kernel.org/r/20220817172731.1185305-4-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Improve checks in the info_get operations

[ Upstream commit 1ecb7d27b1af6705e9a4e94415b4d8cc8cf2fbfb ]

SCMI protocols abstract and expose a number of protocol specific
resources like clocks, sensors and so on. Information about such
specific domain resources are generally exposed via an `info_get`
protocol operation.

Improve the sanity check on these operations where needed.

Link: https://lore.kernel.org/r/20220817172731.1185305-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: fix UAF/GPF bug in nilfs_mdt_destroy

commit 2e488f13755ffbb60f307e991b27024716a33b29 upstream.

In alloc_inode, inode_init_always() could return -ENOMEM if
security_inode_alloc() fails, which causes inode->i_private
uninitialized. Then nilfs_is_metadata_file_inode() returns
true and nilfs_free_inode() wrongly calls nilfs_mdt_destroy(),
which frees the uninitialized inode->i_private
and leads to crashes(e.g., UAF/GPF).

Fix this by moving security_inode_alloc just prior to
this_cpu_inc(nr_inodes)

Link: https://lkml.kernel.org/r/CAFcO6XOcf1Jj2SeGt=jJV59wmhESeSKpfR0omdFRq+J9nD1vfQ@mail.gmail.com
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reported-by: Jiacheng Xu <stitch@zju.edu.cn>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s/radix: don't need to broadcast IPI for radix pmd collapse flush

commit bedf03416913d88c796288f9dca109a53608c745 upstream.

The IPI broadcast is used to serialize against fast-GUP, but fast-GUP will
move to use RCU instead of disabling local interrupts in fast-GUP.  Using
an IPI is the old-styled way of serializing against fast-GUP although it
still works as expected now.

And fast-GUP now fixed the potential race with THP collapse by checking
whether PMD is changed or not.  So IPI broadcast in radix pmd collapse
flush is not necessary anymore.  But it is still needed for hash TLB.

Link: https://lkml.kernel.org/r/20220907180144.555485-2-shy828301@gmail.com
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: gup: fix the fast GUP race against THP collapse

commit 70cbc3cc78a997d8247b50389d37c4e1736019da upstream.

Since general RCU GUP fast was introduced in commit 2667f50e8b81 ("mm:
introduce a general RCU get_user_pages_fast()"), a TLB flush is no longer
sufficient to handle concurrent GUP-fast in all cases, it only handles
traditional IPI-based GUP-fast correctly.  On architectures that send an
IPI broadcast on TLB flush, it works as expected.  But on the
architectures that do not use IPI to broadcast TLB flush, it may have the
below race:

   CPU A                                          CPU B
THP collapse                                     fast GUP
                                              gup_pmd_range() <-- see valid pmd
                                                  gup_pte_range() <-- work on pte
pmdp_collapse_flush() <-- clear pmd and flush
__collapse_huge_page_isolate()
    check page pinned <-- before GUP bump refcount
                                                      pin the page
                                                      check PTE <-- no change
__collapse_huge_page_copy()
    copy data to huge page
    ptep_clear()
install huge pmd for the huge page
                                                      return the stale page
discard the stale page

The race can be fixed by checking whether PMD is changed or not after
taking the page pin in fast GUP, just like what it does for PTE.  If the
PMD is changed it means there may be parallel THP collapse, so GUP should
back off.

Also update the stale comment about serializing against fast GUP in
khugepaged.

Link: https://lkml.kernel.org/r/20220907180144.555485-1-shy828301@gmail.com
Fixes: 2667f50e8b81 ("mm: introduce a general RCU get_user_pages_fast()")
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xsk: Inherit need_wakeup flag for shared sockets

commit 60240bc26114543fcbfcd8a28466e67e77b20388 upstream.

The flag for need_wakeup is not set for xsks with `XDP_SHARED_UMEM`
flag and of different queue ids and/or devices. They should inherit
the flag from the first socket buffer pool since no flags can be
specified once `XDP_SHARED_UMEM` is specified.

Fixes: b5aea28dca134 ("xsk: Add shared umem support between queue ids")
Signed-off-by: Jalal Mostafa <jalal.a.mostapha@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220921135701.10199-1-jalal.a.mostapha@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

docs: update mediator information in CoC docs

commit 8bfdfa0d6b929ede7b6189e0e546ceb6a124d05d upstream.

Update mediator information in the CoC interpretation document.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220901212319.56644-1-skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Makefile.extrawarn: Move -Wcast-function-type-strict to W=1

commit 2120635108b35ecad9c59c8b44f6cbdf4f98214e upstream.

We enable -Wcast-function-type globally in the kernel to warn about
mismatching types in function pointer casts. Compilers currently
warn only about ABI incompability with this flag, but Clang 16 will
enable a stricter version of the check by default that checks for an
exact type match. This will be very noisy in the kernel, so disable
-Wcast-function-type-strict without W=1 until the new warnings have
been addressed.

Cc: stable@vger.kernel.org
Link: https://reviews.llvm.org/D134831
Link: https://github.com/ClangBuiltLinux/linux/issues/1724
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220930203310.4010564-1-samitolvanen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.72

Link: https://lore.kernel.org/r/20221003070721.971297651@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gem: Really move i915_gem_context.link under ref protection

commit d119888b09bd567e07c6b93a07f175df88857e02 upstream.

i915_perf assumes that it can use the i915_gem_context reference to
protect its i915->gem.contexts.list iteration. However, this requires
that we do not remove the context from the list until after we drop the
final reference and release the struct. If, as currently, we remove the
context from the list during context_close(), the link.next pointer may
be poisoned while we are holding the context reference and cause a GPF:

[ 4070.573157] i915 0000:00:02.0: [drm:i915_perf_open_ioctl [i915]] filtering on ctx_id=0x1fffff ctx_id_mask=0x1fffff
[ 4070.574881] general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP
[ 4070.574897] CPU: 1 PID: 284392 Comm: amd_performance Tainted: G            E     5.17.9 #180
[ 4070.574903] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 4070.574907] RIP: 0010:oa_configure_all_contexts.isra.0+0x222/0x350 [i915]
[ 4070.574982] Code: 08 e8 32 6e 10 e1 4d 8b 6d 50 b8 ff ff ff ff 49 83 ed 50 f0 41 0f c1 04 24 83 f8 01 0f 84 e3 00 00 00 85 c0 0f 8e fa 00 00 00 <49> 8b 45 50 48 8d 70 b0 49 8d 45 50 48 39 44 24 10 0f 85 34 fe ff
[ 4070.574990] RSP: 0018:ffffc90002077b78 EFLAGS: 00010202
[ 4070.574995] RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000000
[ 4070.575000] RDX: 0000000000000001 RSI: ffffc90002077b20 RDI: ffff88810ddc7c68
[ 4070.575004] RBP: 0000000000000001 R08: ffff888103242648 R09: fffffffffffffffc
[ 4070.575008] R10: ffffffff82c50bc0 R11: 0000000000025c80 R12: ffff888101bf1860
[ 4070.575012] R13: dead0000000000b0 R14: ffffc90002077c04 R15: ffff88810be5cabc
[ 4070.575016] FS:  00007f1ed50c0780(0000) GS:ffff88885ec80000(0000) knlGS:0000000000000000
[ 4070.575021] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4070.575025] CR2: 00007f1ed5590280 CR3: 000000010ef6f005 CR4: 00000000003706e0
[ 4070.575029] Call Trace:
[ 4070.575033]  <TASK>
[ 4070.575037]  lrc_configure_all_contexts+0x13e/0x150 [i915]
[ 4070.575103]  gen8_enable_metric_set+0x4d/0x90 [i915]
[ 4070.575164]  i915_perf_open_ioctl+0xbc0/0x1500 [i915]
[ 4070.575224]  ? asm_common_interrupt+0x1e/0x40
[ 4070.575232]  ? i915_oa_init_reg_state+0x110/0x110 [i915]
[ 4070.575290]  drm_ioctl_kernel+0x85/0x110
[ 4070.575296]  ? update_load_avg+0x5f/0x5e0
[ 4070.575302]  drm_ioctl+0x1d3/0x370
[ 4070.575307]  ? i915_oa_init_reg_state+0x110/0x110 [i915]
[ 4070.575382]  ? gen8_gt_irq_handler+0x46/0x130 [i915]
[ 4070.575445]  __x64_sys_ioctl+0x3c4/0x8d0
[ 4070.575451]  ? __do_softirq+0xaa/0x1d2
[ 4070.575456]  do_syscall_64+0x35/0x80
[ 4070.575461]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 4070.575467] RIP: 0033:0x7f1ed5c10397
[ 4070.575471] Code: 3c 1c e8 1c ff ff ff 85 c0 79 87 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a9 da 0d 00 f7 d8 64 89 01 48
[ 4070.575478] RSP: 002b:00007ffd65c8d7a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 4070.575484] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f1ed5c10397
[ 4070.575488] RDX: 00007ffd65c8d7c0 RSI: 0000000040106476 RDI: 0000000000000006
[ 4070.575492] RBP: 00005620972f9c60 R08: 000000000000000a R09: 0000000000000005
[ 4070.575496] R10: 000000000000000d R11: 0000000000000246 R12: 000000000000000a
[ 4070.575500] R13: 000000000000000d R14: 0000000000000000 R15: 00007ffd65c8d7c0
[ 4070.575505]  </TASK>
[ 4070.575507] Modules linked in: nls_ascii(E) nls_cp437(E) vfat(E) fat(E) i915(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) aesni_intel(E) crypto_simd(E) intel_gtt(E) cryptd(E) ttm(E) rapl(E) intel_cstate(E) drm_kms_helper(E) cfbfillrect(E) syscopyarea(E) cfbimgblt(E) intel_uncore(E) sysfillrect(E) mei_me(E) sysimgblt(E) i2c_i801(E) fb_sys_fops(E) mei(E) intel_pch_thermal(E) i2c_smbus(E) cfbcopyarea(E) video(E) button(E) efivarfs(E) autofs4(E)
[ 4070.575549] ---[ end trace 0000000000000000 ]---

v3: fix incorrect syntax of spin_lock() replacing spin_lock_irqsave()

v2: irqsave not required in a worker, neither conversion to irq safe
    elsewhere (Tvrtko),
  - perf: it's safe to call gen8_configure_context() even if context has
    been closed, no need to check,
  - drop unrelated cleanup (Andi, Tvrtko)

Reported-by: Mark Janes <mark.janes@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/6222
References: a4e7ccdac38e ("drm/i915: Move context management under GEM")
Fixes: f8246cf4d9a9 ("drm/i915/gem: Drop free_work for GEM contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916092403.201355-3-janusz.krzysztofik@linux.intel.com
(cherry picked from commit ad3aa7c31efa5a09b0dba42e66cfdf77e0db7dc2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[janusz: backport]
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/alternative: Fix race in try_get_desc()

commit efd608fa7403ba106412b437f873929e2c862e28 upstream.

I encountered some occasional crashes of poke_int3_handler() when
kprobes are set, while accessing desc->vec.

The text poke mechanism claims to have an RCU-like behavior, but it
does not appear that there is any quiescent state to ensure that
nobody holds reference to desc. As a result, the following race
appears to be possible, which can lead to memory corruption.

  CPU0 CPU1
  ---- ----
  text_poke_bp_batch()
  -> smp_store_release(&bp_desc, &desc)

  [ notice that desc is on
    the stack ]

poke_int3_handler()

[ int3 might be kprobe's
  so sync events are do not
  help ]

-> try_get_desc(descp=&bp_desc)
   desc = __READ_ONCE(bp_desc)

   if (!desc) [false, success]
  WRITE_ONCE(bp_desc, NULL);
  atomic_dec_and_test(&desc.refs)

  [ success, desc space on the stack
    is being reused and might have
    non-zero value. ]
arch_atomic_inc_not_zero(&desc->refs)

[ might succeed since desc points to
  stack memory that was freed and might
  be reused. ]

Fix this issue with small backportable patch. Instead of trying to
make RCU-like behavior for bp_desc, just eliminate the unnecessary
level of indirection of bp_desc, and hold the whole descriptor as a
global.  Anyhow, there is only a single descriptor at any given
moment.

Fixes: 1f676247f36a4 ("x86/alternatives: Implement a better poke_int3_handler() completion scheme")
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20220920224743.3089-1-namit@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Hide IA32_PLATFORM_DCA_CAP[31:0] from the guest

[ Upstream commit aae2e72229cdb21f90df2dbe4244c977e5d3265b ]

The only thing reported by CPUID.9 is the value of
IA32_PLATFORM_DCA_CAP[31:0] in EAX. This MSR doesn't even exist in the
guest, since CPUID.1:ECX.DCA[bit 18] is clear in the guest.

Clear CPUID.9 in KVM_GET_SUPPORTED_CPUID.

Fixes: 24c82e576b78 ("KVM: Sanitize cpuid")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220922231854.249383-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: iproc: Do not rely on node name for correct PLL setup

[ Upstream commit 1b24a132eba7a1c19475ba2510ec1c00af3ff914 ]

After commit 31fd9b79dc58 ("ARM: dts: BCM5301X: update CRU block
description") a warning from clk-iproc-pll.c was generated due to a
duplicate PLL name as well as the console stopped working. Upon closer
inspection it became clear that iproc_pll_clk_setup() used the Device
Tree node unit name as an unique identifier as well as a parent name to
parent all clocks under the PLL.

BCM5301X was the first platform on which that got noticed because of the
DT node unit name renaming but the same assumptions hold true for any
user of the iproc_pll_clk_setup() function.

The first 'clock-output-names' property is always guaranteed to be
unique as well as providing the actual desired PLL clock name, so we
utilize that to register the PLL and as a parent name of all children
clock.

Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20220905161504.1526-1-f.fainelli@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks

[ Upstream commit b1ff1bfe81e763420afd5f3f25f0b3cbfd97055c ]

There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag
should not be used. For instance, the default parent clock for QSPI is
pll2_bus, which is also the parent clock for quite a few modules, such
as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system
hang due to pll2_bus rate changed.

Fixes: f1541e15e38e ("clk: imx6sx: Switch to clk_hw based API")
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com
Tested-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: split off setxattr_copy and do_setxattr function from setxattr

[ Upstream commit 1a91794ce8481a293c5ef432feb440aee1455619 ]

This splits of the setup part of the function setxattr in its own
dedicated function called setxattr_copy. In addition it also exposes a new
function called do_setxattr for making the setxattr call.

This makes it possible to call these two functions from io_uring in the
processing of an xattr request.

Signed-off-by: Stefan Roesch <shr@fb.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20220323154420.3301504-2-shr@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 06bbaa6dc53c ("[coredump] don't use __kernel_write() on kmap_local_page()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa/ifcvf: fix the calculation of queuepair

[ Upstream commit db5db1a00d0816207be3a0166fcb4f523eaf3b52 ]

The q_pair_id to address a queue pair in the lm bar should be
calculated by queue_id / 2 rather than queue_id / nr_vring.

Fixes: 2ddae773c93b ("vDPA/ifcvf: detect and use the onboard number of queues directly")
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20220923091013.191-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: Fix the if conditions of in test_extra_filter()

[ Upstream commit bc7a319844891746135dc1f34ab9df78d636a3ac ]

The socket 2 bind the addr in use, bind should fail with EADDRINUSE. So
if bind success or errno != EADDRINUSE, testcase should be failed.

Fixes: 3ca8e4029969 ("soreuseport: BPF selection functional test")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1663916557-10730-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume()

[ Upstream commit ea64cdfad124922c931633e39287c5a31a9b14a1 ]

Commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume()
state") introduced a WARN() on resume from system sleep if a PHY is not
in PHY_HALTED state.

Commit 6dbe852c379f ("net: phy: Don't WARN for PHY_READY state in
mdio_bus_phy_resume()") added an exemption for PHY_READY state from
the WARN().

It turns out PHY_UP state needs to be exempted as well because the
following may happen on suspend:

  mdio_bus_phy_suspend()
    phy_stop_machine()
      phydev->state = PHY_UP  #  if (phydev->state >= PHY_UP)

Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/netdev/2b1a1588-505e-dff3-301d-bfc1fb14d685@samsung.com/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/8128fdb51eeebc9efbf3776a4097363a1317aaf1.1663905575.git.lukas@wunner.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: power up/down serdes in stmmac_open/release

[ Upstream commit 49725ffc15fc4e9fae68c55b691fd25168cbe5c1 ]

This commit fixes DMA engine reset timeout issue in suspend/resume
with ADLink I-Pi SMARC Plus board which dmesg shows:
...
[   54.678271] PM: suspend exit
[   54.754066] intel-eth-pci 0000:00:1d.2 enp0s29f2: PHY [stmmac-3:01] driver [Maxlinear Ethernet GPY215B] (irq=POLL)
[   54.755808] intel-eth-pci 0000:00:1d.2 enp0s29f2: Register MEM_TYPE_PAGE_POOL RxQ-0
...
[   54.780482] intel-eth-pci 0000:00:1d.2 enp0s29f2: Register MEM_TYPE_PAGE_POOL RxQ-7
[   55.784098] intel-eth-pci 0000:00:1d.2: Failed to reset the dma
[   55.784111] intel-eth-pci 0000:00:1d.2 enp0s29f2: stmmac_hw_setup: DMA engine initialization failed
[   55.784115] intel-eth-pci 0000:00:1d.2 enp0s29f2: stmmac_open: Hw setup failed
...

The issue is related with serdes which impacts clock.  There is
serdes in ADLink I-Pi SMARC board ethernet controller. Please refer to
commit b9663b7ca6ff78 ("net: stmmac: Enable SERDES power up/down sequence")
for detial. When issue is reproduced, DMA engine clock is not ready
because serdes is not powered up.

To reproduce DMA engine reset timeout issue with hardware which has
serdes in GBE controller, install Ubuntu. In Ubuntu GUI, click
"Power Off/Log Out" -> "Suspend" menu, it disables network interface,
then goes to sleep mode. When it wakes up, it enables network
interface again. Stmmac driver is called in this way:

1. stmmac_release: Stop network interface. In this function, it
   disables DMA engine and network interface;
2. stmmac_suspend: It is called in kernel suspend flow. But because
   network interface has been disabled(netif_running(ndev) is
   false), it does nothing and returns directly;
3. System goes into S3 or S0ix state. Some time later, system is
   waken up by keyboard or mouse;
4. stmmac_resume: It does nothing because network interface has
   been disabled;
5. stmmac_open: It is called to enable network interace again. DMA
   engine is initialized in this API, but serdes is not power on so
   there will be DMA engine reset timeout issue.

Similarly, serdes powerdown should be added in stmmac_release.
Network interface might be disabled by cmd "ifconfig eth0 down",
DMA engine, phy and mac have been disabled in ndo_stop callback,
serdes should be powered down as well. It doesn't make sense that
serdes is on while other components have been turned off.

If ethernet interface is in enabled state(netif_running(ndev) is true)
before suspend/resume, the issue couldn't be reproduced  because serdes
could be powered up in stmmac_resume.

Because serdes_powerup is added in stmmac_open, it doesn't need to be
called in probe function.

Fixes: b9663b7ca6ff78 ("net: stmmac: Enable SERDES power up/down sequence")
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
Tested-by: Jimmy JS Chen <jimmyjs.chen@adlinktech.com>
Tested-by: Looi, Hong Aun <hong.aun.looi@intel.com>
Link: https://lore.kernel.org/r/20220923050448.1220250-1-junxiao.chang@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: fix regression with non-QoS drivers

[ Upstream commit d873697ef2b7e1b6fdd8e9d449d9354bd5d29a4a ]

Commit 10cb8e617560 ("mac80211: enable QoS support for nl80211 ctrl port")
changed ieee80211_tx_control_port() to aways call
__ieee80211_select_queue() without checking local->hw.queues.

__ieee80211_select_queue() returns a queue-id between 0 and 3, which means
that now ieee80211_tx_control_port() may end up setting the queue-mapping
for a skb to a value higher then local->hw.queues if local->hw.queues
is less then 4.

Specifically this is a problem for ralink rt2500-pci cards where
local->hw.queues is 2. There this causes rt2x00queue_get_tx_queue() to
return NULL and the following error to be logged: "ieee80211 phy0:
rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2",
after which association with the AP fails.

Other callers of __ieee80211_select_queue() skip calling it when
local->hw.queues < IEEE80211_NUM_ACS, add the same check to
ieee80211_tx_control_port(). This fixes ralink rt2500-pci and
similar cards when less then 4 tx-queues no longer working.

Fixes: 10cb8e617560 ("mac80211: enable QoS support for nl80211 ctrl port")
Cc: Markus Theil <markus.theil@tu-ilmenau.de>
Suggested-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220918192052.443529-1-hdegoede@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices

[ Upstream commit c292a337d0e45a292c301e3cd51c35aa0ae91e95 ]

The IOC_PR_CLEAR and IOC_PR_RELEASE ioctls are
non-functional on NVMe devices because the nvme_pr_clear()
and nvme_pr_release() functions set the IEKEY field incorrectly.
The IEKEY field should be set only when the key is zero (i.e,
not specified).  The current code does it backwards.

Furthermore, the NVMe spec describes the persistent
reservation "clear" function as an option on the reservation
release command. The current implementation of nvme_pr_clear()
erroneously uses the reservation register command.

Fix these errors. Note that NVMe version 1.3 and later specify
that setting the IEKEY field will return an error of Invalid
Field in Command.  The fix will set IEKEY when the key is zero,
which is appropriate as these ioctls consider a zero key to
be "unspecified", and the intention of the spec change is
to require a valid key.

Tested on a version 1.4 PCI NVMe device in an Azure VM.

Fixes: 1673f1f08c88 ("nvme: move block_device_operations and ns/ctrl freeing to common code")
Fixes: 1d277a637a71 ("NVMe: Add persistent reservation ops")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe

[ Upstream commit 4774db8dfc6a2e6649920ebb2fc8e2f062c2080d ]

The devm_ioremap() function returns NULL on error, it doesn't return
error pointers.

Fixes: 3a1a274e933f ("mlxbf_gige: compute MDIO period based on i1clk")
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Link: https://lore.kernel.org/r/20220923023640.116057-1-wupeng58@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: fix missing unlock on ETHOFLD desc collect fail path

[ Upstream commit c635ebe8d911a93bd849a9419b01a58783de76f1 ]

The label passed to the QDESC_GET for the ETHOFLD TXQ, RXQ, and FLQ, is the
'out' one, which skips the 'out_unlock' label, and thus doesn't unlock the
'uld_mutex' before returning. Additionally, since commit 5148e5950c67
("cxgb4: add EOTID tracking and software context dump"), the access to
these ETHOFLD hardware queues should be protected by the 'mqprio_mutex'
instead.

Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support")
Fixes: 5148e5950c67 ("cxgb4: add EOTID tracking and software context dump")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Link: https://lore.kernel.org/r/20220922175109.764898-1-rafaelmendsr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: act_ct: fix possible refcount leak in tcf_ct_init()

[ Upstream commit 6e23ec0ba92d426c77a73a9ccab16346e5e0ef49 ]

nf_ct_put need to be called to put the refcount got by tcf_ct_fill_params
to avoid possible refcount leak when tcf_ct_flow_table_get fails.

Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220923020046.8021-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbnet: Fix memory leak in usbnet_disconnect()

[ Upstream commit a43206156263fbaf1f2b7f96257441f331e91bb7 ]

Currently usbnet_disconnect() unanchors and frees all deferred URBs
using usb_scuttle_anchored_urbs(), which does not free urb->context,
causing a memory leak as reported by syzbot.

Use a usb_get_from_anchor() while loop instead, similar to what we did
in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in
play_deferred").  Also free urb->sg.

Reported-and-tested-by: syzbot+dcd3e13cf4472f2e0ba1@syzkaller.appspotmail.com
Fixes: 69ee472f2706 ("usbnet & cdc-ether: Autosuspend for online devices")
Fixes: 638c5115a794 ("USBNET: support DMA SG")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/20220923042551.2745-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mvebu: Fix check for pwm support on non-A8K platforms

[ Upstream commit 4335417da2b8d6d9b2d4411b5f9e248e5bb2d380 ]

pwm support incompatible with Armada 80x0/70x0 API is not only in
Armada 370, but also in Armada XP, 38x and 39x. So basically every non-A8K
platform. Fix check for pwm support appropriately.

Fixes: 85b7d8abfec7 ("gpio: mvebu: add pwm support for Armada 8K/7K")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: melfas_mip4 - fix return value check in mip4_probe()

[ Upstream commit a54dc27bd25f20ee3ea2009584b3166d25178243 ]

devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER),
add a minus sign to fix it.

Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time"

[ Upstream commit cc62d98bd56d45de4531844ca23913a15136c05b ]

This reverts commit 211f276ed3d96e964d2d1106a198c7f4a4b3f4c0.

For quite some time, core DRM helpers already ensure that any relevant
connectors/CRTCs/etc. are disabled, as well as their associated
components (e.g., bridges) when suspending the system. Thus,
analogix_dp_bridge_{enable,disable}() already get called, which in turn
call drm_panel_{prepare,unprepare}(). This makes these drm_panel_*()
calls redundant.

Besides redundancy, there are a few problems with this handling:

(1) drm_panel_{prepare,unprepare}() are *not* reference-counted APIs and
are not in general designed to be handled by multiple callers --
although some panel drivers have a coarse 'prepared' flag that mitigates
some damage, at least. So at a minimum this is redundant and confusing,
but in some cases, this could be actively harmful.

(2) The error-handling is a bit non-standard. We ignored errors in
suspend(), but handled errors in resume(). And recently, people noticed
that the clk handling is unbalanced in error paths, and getting *that*
right is not actually trivial, given the current way errors are mostly
ignored.

(3) In the particular way analogix_dp_{suspend,resume}() get used (e.g.,
in rockchip_dp_*(), as a late/early callback), we don't necessarily have
a proper PM relationship between the DP/bridge device and the panel
device. So while the DP bridge gets resumed, the panel's parent device
(e.g., platform_device) may still be suspended, and so any prepare()
calls may fail.

So remove the superfluous, possibly-harmful suspend()/resume() handling
of panel state.

Fixes: 211f276ed3d9 ("drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time")
Link: https://lore.kernel.org/all/Yv2CPBD3Picg%2FgVe@google.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822180729.1.I8ac5abe3a4c1c6fd5c061686c6e883c22f69022c@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt8912b: fix corrupted image output

[ Upstream commit 051ad2788d35ca07aec8402542e5d38429f2426a ]

Correct I2C address for the register list in lt8912_write_lvds_config(),
these registers are on the first I2C address (0x48), the current
function is just writing garbage to the wrong registers and this creates
multiple issues (artifacts and output completely corrupted) on some HDMI
displays.

Correct I2C address comes from Lontium documentation and it is the one
used on other out-of-tree LT8912B drivers [1].

[1] https://github.com/boundarydevices/linux/blob/boundary-imx_5.10.x_2.0.0/drivers/video/lt8912.c#L296

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-4-dev@pschenker.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt8912b: set hdmi or dvi mode

[ Upstream commit 6dd1de12e1243f2013e4fabf31e99e63b1a860d0 ]

The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads
from EDID what the display needs and sets it accordingly.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: lt8912b: add vsync hsync

[ Upstream commit da73a94fa282f78d485bd0aab36c8ac15b6f792c ]

Currently the bridge driver does not take care whether or not the display
needs positive/negative vertical/horizontal syncs. Pass these two flags
to the bridge from the EDID that was read out from the display.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tas2770: Reinit regcache on reset

[ Upstream commit 0a0342ede303fc420f3a388e1ae82da3ae8ff6bd ]

On probe of the ASoC component, the device is reset but the regcache is
retained. This means the regcache gets out of sync if the codec is
rebound to a sound card for a second time. Fix it by reinitializing the
regcache to defaults after the device is reset.

Fixes: b0bcbe615756 ("ASoC: tas2770: Fix calling reset in probe")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220919173453.84292-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8350: fix UFS PHY serdes size

[ Upstream commit 40e9541959100e017533e18e44d07eed44f91dc5 ]

The size of the UFS PHY serdes register region is 0x1c4 and the
corresponding 'reg' property should specifically not include the
adjacent regions that are defined in the child node (e.g. tx and rx).

Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220916093603.24263-1-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: imx-card: Fix refcount issue with of_node_put

[ Upstream commit d56ba9a04d7548d4149c46ec86a0e3cc41a70f4a ]

imx_card_parse_of will search all the node with loop,
if there is defer probe happen in the middle of loop,
the previous released codec node will be released
twice, then cause refcount issue.

Here assign NULL to pointer of released nodes to fix
the issue.

Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1663059601-29259-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sunxi: sram: Fix debugfs info for A64 SRAM C

[ Upstream commit e3c95edb1bd8b9c2cb0caa6ae382fc8080f6a0ed ]

The labels were backward with respect to the register values. The SRAM
is mapped to the CPU when the register value is 1.

Fixes: 5e4fb6429761 ("drivers: soc: sunxi: add support for A64 and its SRAM C")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-7-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sunxi: sram: Fix probe function ordering issues

[ Upstream commit 49fad91a7b8941979c3e9a35f9894ac45bc5d3d6 ]

Errors from debugfs are intended to be non-fatal, and should not prevent
the driver from probing.

Since debugfs file creation is treated as infallible, move it below the
parts of the probe function that can fail. This prevents an error
elsewhere in the probe function from causing the file to leak. Do the
same for the call to of_platform_populate().

Finally, checkpatch suggests an octal literal for the file permissions.

Fixes: 4af34b572a85 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs")
Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-6-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sunxi_sram: Make use of the helper function devm_platform_ioremap_resource()

[ Upstream commit 1f3753a5f042fea6539986f9caf2552877527d8a ]

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210908071716.772-1-caihuoqing@baidu.com
Stable-dep-of: 49fad91a7b89 ("soc: sunxi: sram: Fix probe function ordering issues")
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sunxi: sram: Prevent the driver from being unbound

[ Upstream commit 90e10a1fcd9b24b4ba8c0d35136127473dcd829e ]

This driver exports a regmap tied to the platform device (as opposed to
a syscon, which exports a regmap tied to the OF node). Because of this,
the driver can never be unbound, as that would destroy the regmap. Use
builtin_platform_driver_probe() to enforce this limitation.

Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-5-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: sunxi: sram: Actually claim SRAM regions

[ Upstream commit fd362baad2e659ef0fb5652f023a606b248f1781 ]

sunxi_sram_claim() checks the sram_desc->claimed flag before updating
the register, with the intent that only one device can claim a region.
However, this was ineffective because the flag was never set.

Fixes: 4af34b572a85 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-4-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am5748: keep usb4_tm disabled

[ Upstream commit 6a6d9ecff14a2a46c1deeffa3eb3825349639bdd ]

Commit bcbb63b80284 ("ARM: dts: dra7: Separate AM57 dtsi files")
disabled usb4_tm for am5748 devices since USB4 IP is not present
in this SoC.

The commit log explained the difference between AM5 and DRA7 families:

AM5 and DRA7 SoC families have different set of modules in them so the
SoC sepecific dtsi files need to be separated.

e.g. Some of the major differences between AM576 and DRA76

DRA76x AM576x

USB3 x
USB4 x
ATL x
VCP x
MLB x
ISS x
PRU-ICSS1 x
PRU-ICSS2 x

Then commit 176f26bcd41a ("ARM: dts: Add support for dra762 abz
package") removed usb4_tm part from am5748.dtsi and introcuded new
ti-sysc errors in dmesg:

ti-sysc 48940000.target-module: clock get error for fck: -2
ti-sysc: probe of 48940000.target-module failed with error -2

Fixes: 176f26bcd41a ("ARM: dts: Add support for dra762 abz package")

Signed-off-by: Romain Naour <romain.naour@skf.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Message-Id: <20220823072742.351368-1-romain.naour@smile.fr>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: imx7: Fix the iMX8MP PCIe PHY PERST support

[ Upstream commit 051d9eb403887bb11852b7a4f744728a6a4b1b58 ]

On i.MX7/iMX8MM/iMX8MQ, the initialized default value of PERST bit(BIT3)
of SRC_PCIEPHY_RCR is 1b'1.
But i.MX8MP has one inversed default value 1b'0 of PERST bit.

And the PERST bit should be kept 1b'1 after power and clocks are stable.
So fix the i.MX8MP PCIe PHY PERST support here.

Fixes: e08672c03981 ("reset: imx7: Add support for i.MX8MP SoC")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1661845564-11373-5-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am33xx: Fix MMCHS0 dma properties

[ Upstream commit 2eb502f496f7764027b7958d4e74356fed918059 ]

According to technical manual(table 11-24), the DMA of MMCHS0 should be
direct mapped.

Fixes: b5e509066074 ("ARM: DTS: am33xx: Use the new DT bindings for the eDMA3")
Signed-off-by: YuTong Chang <mtwget@gmail.com>
Message-Id: <20220620124146.5330-1-mtwget@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

swiotlb: max mapping size takes min align mask into account

commit 82806744fd7dde603b64c151eeddaa4ee62193fd upstream.

swiotlb_find_slots() skips slots according to io tlb aligned mask
calculated from min aligned mask and original physical address
offset. This affects max mapping size. The mapping size can't
achieve the IO_TLB_SEGSIZE * IO_TLB_SIZE when original offset is
non-zero. This will cause system boot up failure in Hyper-V
Isolation VM where swiotlb force is enabled. Scsi layer use return
value of dma_max_mapping_size() to set max segment size and it
finally calls swiotlb_max_mapping_size(). Hyper-V storage driver
sets min align mask to 4k - 1. Scsi layer may pass 256k length of
request buffer with 0~4k offset and Hyper-V storage driver can't
get swiotlb bounce buffer via DMA API. Swiotlb_find_slots() can't
find 256k length bounce buffer with offset. Make swiotlb_max_mapping
_size() take min align mask into account.

Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()

commit 4e768c8e34e639cff66a0f175bc4aebf472e4305 upstream.

The v4l2_compat_get_array_args() function can leave uninitialized memory in the
buffer it is passed. So zero it before copying array elements from userspace
into the buffer.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+ff18193ff05f3f87f226@syzkaller.appspotmail.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rkvdec: Disable H.264 error detection

commit 3a99c4474112f49a5459933d8758614002ca0ddc upstream.

Quite often, the HW get stuck in error condition if a stream error
was detected. As documented, the HW should stop immediately and self
reset. There is likely a problem or a miss-understanding of the self
reset mechanism, as unless we make a long pause, the next command
will then report an error even if there is no error in it.

Disabling error detection fixes the issue, and let the decoder continue
after an error. This patch is safe for backport into older kernels.

Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb_vb2: fix possible out of bound access

commit 37238699073e7e93f05517e529661151173cd458 upstream.

vb2_core_qbuf and vb2_core_querybuf don't check the range of b->index
controlled by the user.

Fix this by adding range checking code before using them.

Fixes: 57868acc369a ("media: videobuf2: Add new uAPI for DVB streaming I/O")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm,hwpoison: check mm when killing accessing process

commit 77677cdbc2aa4b5d5d839562793d3d126201d18d upstream.

The GHES code calls memory_failure_queue() from IRQ context to queue work
into workqueue and schedule it on the current CPU.  Then the work is
processed in memory_failure_work_func() by kworker and calls
memory_failure().

When a page is already poisoned, commit a3f5d80ea401 ("mm,hwpoison: send
SIGBUS with error virutal address") make memory_failure() call
kill_accessing_process() that:

    - holds mmap locking of current->mm
    - does pagetable walk to find the error virtual address
    - and sends SIGBUS to the current process with error info.

However, the mm of kworker is not valid, resulting in a null-pointer
dereference.  So check mm when killing the accessing process.

[akpm@linux-foundation.org: remove unrelated whitespace alteration]
Link: https://lkml.kernel.org/r/20220914064935.7851-1-xueshuai@linux.alibaba.com
Fixes: a3f5d80ea401 ("mm,hwpoison: send SIGBUS with error virutal address")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix madivse_pageout mishandling on non-LRU page

commit 58d426a7ba92870d489686dfdb9d06b66815a2ab upstream.

MADV_PAGEOUT tries to isolate non-LRU pages and gets a warning from
isolate_lru_page below.

Fix it by checking PageLRU in advance.

------------[ cut here ]------------
trying to isolate tail page
WARNING: CPU: 0 PID: 6175 at mm/folio-compat.c:158 isolate_lru_page+0x130/0x140
Modules linked in:
CPU: 0 PID: 6175 Comm: syz-executor.0 Not tainted 5.18.12 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:isolate_lru_page+0x130/0x140

Link: https://lore.kernel.org/linux-mm/485f8c33.2471b.182d5726afb.Coremail.hantianshuo@iie.ac.cn/
Link: https://lkml.kernel.org/r/20220908151204.762596-1-minchan@kernel.org
Fixes: 1a4e58cce84e ("mm: introduce MADV_PAGEOUT")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: 韩天ç`\95 <hantianshuo@iie.ac.cn>
Suggested-by: Yang Shi <shy828301@gmail.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/migrate_device.c: flush TLB while holding PTL

commit 60bae73708963de4a17231077285bd9ff2f41c44 upstream.

When clearing a PTE the TLB should be flushed whilst still holding the PTL
to avoid a potential race with madvise/munmap/etc.  For example consider
the following sequence:

  CPU0                          CPU1
  ----                          ----

  migrate_vma_collect_pmd()
  pte_unmap_unlock()
                                madvise(MADV_DONTNEED)
                                -> zap_pte_range()
                                pte_offset_map_lock()
                                [ PTE not present, TLB not flushed ]
                                pte_unmap_unlock()
                                [ page is still accessible via stale TLB ]
  flush_tlb_range()

In this case the page may still be accessed via the stale TLB entry after
madvise returns.  Fix this by flushing the TLB while holding the PTL.

Fixes: 8c3328f1f36a ("mm/migrate: migrate_vma() unmap page from vma while collecting pages")
Link: https://lkml.kernel.org/r/9f801e9d8d830408f2ca27821f606e09aa856899.1662078528.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix dereferencing possible ERR_PTR

commit 4eb5bbde3ccb710d3b85bfb13466612e56393369 upstream.

Smatch checker complains that 'secretmem_mnt' dereferencing possible
ERR_PTR().  Let the function return if 'secretmem_mnt' is ERR_PTR, to
avoid deferencing it.

Link: https://lkml.kernel.org/r/20220904074647.GA64291@cloud-MacBookPro
Fixes: 1507f51255c9f ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: Binyi Han <dantengknight@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foudation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: prevent page_frag_alloc() from corrupting the memory

commit dac22531bbd4af2426c4e29e05594415ccfa365d upstream.

A number of drivers call page_frag_alloc() with a fragment's size >
PAGE_SIZE.

In low memory conditions, __page_frag_cache_refill() may fail the order
3 cache allocation and fall back to order 0; In this case, the cache
will be smaller than the fragment, causing memory corruptions.

Prevent this from happening by checking if the newly allocated cache is
large enough for the fragment; if not, the allocation will fail and
page_frag_alloc() will return NULL.

Link: https://lkml.kernel.org/r/20220715125013.247085-1-mlombard@redhat.com
Fixes: b63ae8ca096d ("mm/net: Rename and move page fragment handling from net/ to mm/")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Cc: Chen Lin <chen45464546@163.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_alloc: fix race condition between build_all_zonelists and page allocation

commit 3d36424b3b5850bd92f3e89b953a430d7cfc88ef upstream.

Patrick Daly reported the following problem;

NODE_DATA(nid)->node_zonelists[ZONELIST_FALLBACK] - before offline operation
[0] - ZONE_MOVABLE
[1] - ZONE_NORMAL
[2] - NULL

For a GFP_KERNEL allocation, alloc_pages_slowpath() will save the
offset of ZONE_NORMAL in ac->preferred_zoneref. If a concurrent
memory_offline operation removes the last page from ZONE_MOVABLE,
build_all_zonelists() & build_zonerefs_node() will update
node_zonelists as shown below. Only populated zones are added.

NODE_DATA(nid)->node_zonelists[ZONELIST_FALLBACK] - after offline operation
[0] - ZONE_NORMAL
[1] - NULL
[2] - NULL

The race is simple -- page allocation could be in progress when a memory
hot-remove operation triggers a zonelist rebuild that removes zones.  The
allocation request will still have a valid ac->preferred_zoneref that is
now pointing to NULL and triggers an OOM kill.

This problem probably always existed but may be slightly easier to trigger
due to 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones
with pages managed by the buddy allocator") which distinguishes between
zones that are completely unpopulated versus zones that have valid pages
not managed by the buddy allocator (e.g.  reserved, memblock, ballooning
etc).  Memory hotplug had multiple stages with timing considerations
around managed/present page updates, the zonelist rebuild and the zone
span updates.  As David Hildenbrand puts it

memory offlining adjusts managed+present pages of the zone
essentially in one go. If after the adjustments, the zone is no
longer populated (present==0), we rebuild the zone lists.

Once that's done, we try shrinking the zone (start+spanned
pages) -- which results in zone_start_pfn == 0 if there are no
more pages. That happens *after* rebuilding the zonelists via
remove_pfn_range_from_zone().

The only requirement to fix the race is that a page allocation request
identifies when a zonelist rebuild has happened since the allocation
request started and no page has yet been allocated.  Use a seqlock_t to
track zonelist updates with a lockless read-side of the zonelist and
protecting the rebuild and update of the counter with a spinlock.

[akpm@linux-foundation.org: make zonelist_update_seq static]
Link: https://lkml.kernel.org/r/20220824110900.vh674ltxmzb3proq@techsingularity.net
Fixes: 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Patrick Daly <quic_pdaly@quicinc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: hsq: Fix data stomping during mmc recovery

commit e7afa79a3b35a27a046a2139f8b20bd6b98155c2 upstream.

The block device uses multiple queues to access emmc. There will be up to 3
requests in the hsq of the host. The current code will check whether there
is a request doing recovery before entering the queue, but it will not check
whether there is a request when the lock is issued. The request is in recovery
mode. If there is a request in recovery, then a read and write request is
initiated at this time, and the conflict between the request and the recovery
request will cause the data to be trampled.

Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Fixes: 511ce378e16f ("mmc: Add MMC host software queue support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220916090506.10662-1-wenchao.chen666@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: moxart: fix 4-bit bus width and remove 8-bit bus width

commit 35ca91d1338ae158f6dcc0de5d1e86197924ffda upstream.

According to the datasheet [1] at page 377, 4-bit bus width is turned on by
bit 2 of the Bus Width Register. Thus the current bitmask is wrong: define
BUS_WIDTH_4 BIT(1)

BIT(1) does not work but BIT(2) works. This has been verified on real MOXA
hardware with FTSDC010 controller revision 1_6_0.

The corrected value of BUS_WIDTH_4 mask collides with: define BUS_WIDTH_8
BIT(2). Additionally, 8-bit bus width mode isn't supported according to the
datasheet, so let's remove the corresponding code.

[1]
https://bitbucket.org/Kasreyn/mkrom-uc7112lx/src/master/documents/FIC8120_DS_v1.2.pdf

Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220907205753.1577434-1-saproj@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205

commit ea08aec7e77bfd6599489ec430f9f859ab84575a upstream.

Commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as
board_ahci_mobile") added an explicit entry for AMD Green Sardine
AHCI controller using the board_ahci_mobile configuration (this
configuration has later been renamed to board_ahci_low_power).

The board_ahci_low_power configuration enables support for low power
modes.

This explicit entry takes precedence over the generic AHCI controller
entry, which does not enable support for low power modes.

Therefore, when commit 1527f69204fe ("ata: ahci: Add Green Sardine
vendor ID as board_ahci_mobile") was backported to stable kernels,
it make some Pioneer optical drives, which was working perfectly fine
before the commit was backported, stop working.

The real problem is that the Pioneer optical drives do not handle low
power modes correctly. If these optical drives would have been tested
on another AHCI controller using the board_ahci_low_power configuration,
this issue would have been detected earlier.

Unfortunately, the board_ahci_low_power configuration is only used in
less than 15% of the total AHCI controller entries, so many devices
have never been tested with an AHCI controller with low power modes.

Fixes: 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile")
Cc: stable@vger.kernel.org
Reported-by: Jaap Berkhout <j.j.berkhout@staalenberk.nl>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vduse: prevent uninitialized memory accesses

commit 46f8a29272e51b6df7393d58fc5cb8967397ef2b upstream.

If the VDUSE application provides a smaller config space
than the driver expects, the driver may use uninitialized
memory from the stack.

This patch prevents it by initializing the buffer passed by
the driver to store the config value.

This fix addresses CVE-2022-2308.

Cc: stable@vger.kernel.org # v5.15+
Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20220831154923.97809-1-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Add amdgpu suspend-resume code path under SRIOV

commit 3b7329cf5a767c1be38352d43066012e220ad43c upstream.

- Under SRIOV, we need to send REQ_GPU_FINI to the hypervisor
  during the suspend time. Furthermore, we cannot request a
  mode 1 reset under SRIOV as VF. Therefore, we will skip it
  as it is called in suspend_noirq() function.

- In the resume code path, we need to send REQ_GPU_INIT to the
  hypervisor and also resume PSP IP block under SRIOV.

Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gt: Restrict forced preemption to the active context

commit 6ef7d362123ecb5bf6d163bb9c7fd6ba2d8c968c upstream.

When we submit a new pair of contexts to ELSP for execution, we start a
timer by which point we expect the HW to have switched execution to the
pending contexts. If the promotion to the new pair of contexts has not
occurred, we declare the executing context to have hung and force the
preemption to take place by resetting the engine and resubmitting the
new contexts.

This can lead to an unfair situation where almost all of the preemption
timeout is consumed by the first context which just switches into the
second context immediately prior to the timer firing and triggering the
preemption reset (assuming that the timer interrupts before we process
the CS events for the context switch). The second context hasn't yet had
a chance to yield to the incoming ELSP (and send the ACk for the
promotion) and so ends up being blamed for the reset.

If we see that a context switch has occurred since setting the
preemption timeout, but have not yet received the ACK for the ELSP
promotion, rearm the preemption timer and check again. This is
especially significant if the first context was not schedulable and so
we used the shortest timer possible, greatly increasing the chance of
accidentally blaming the second innocent context.

Fixes: 3a7a92aba8fb ("drm/i915/execlists: Force preemption")
Fixes: d12acee84ffb ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220921135258.1714873-1-andrzej.hajda@intel.com
(cherry picked from commit 107ba1a2c705f4358f2602ec2f2fd821bb651f42)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "firmware: arm_scmi: Add clock management to the SCMI power domain"

commit 3c6656337852e9f1a4079d172f3fddfbf00868f9 upstream.

This reverts commit a3b884cef873 ("firmware: arm_scmi: Add clock management
to the SCMI power domain").

Using the GENPD_FLAG_PM_CLK tells genpd to gate/ungate the consumer
device's clock(s) during runtime suspend/resume through the PM clock API.
More precisely, in genpd_runtime_resume() the clock(s) for the consumer
device would become ungated prior to the driver-level ->runtime_resume()
callbacks gets invoked.

This behaviour isn't a good fit for all platforms/drivers. For example, a
driver may need to make some preparations of its device in its
->runtime_resume() callback, like calling clk_set_rate() before the
clock(s) should be ungated. In these cases, it's easier to let the clock(s)
to be managed solely by the driver, rather than at the PM domain level.

For these reasons, let's drop the use GENPD_FLAG_PM_CLK for the SCMI PM
domain, as to enable it to be more easily adopted across ARM platforms.

Fixes: a3b884cef873 ("firmware: arm_scmi: Add clock management to the SCMI power domain")
Cc: Nicolas Pitre <npitre@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220919122033.86126-1-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mt7531: only do PLL once after the reset

commit 42bc4fafe359ed6b73602b7a2dba0dd99588f8ce upstream.

Move the PLL init of the switch out of the pad configuration of the port
6 (usally cpu port).

Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for
outbound traffic on port 5 or port 6.

Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/damon/dbgfs: fix memory leak when using debugfs_lookup()

commit 1552fd3ef7dbe07208b8ae84a0a6566adf7dfc9d upstream.

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  Fix this up by properly calling
dput().

Link: https://lkml.kernel.org/r/20220902191149.112434-1-sj@kernel.org
Fixes: 75c1c2b53c78b ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntfs: fix BUG_ON in ntfs_lookup_inode_by_name()

commit 1b513f613731e2afc05550e8070d79fac80c661e upstream.

Syzkaller reported BUG_ON as follows:

------------[ cut here ]------------
kernel BUG at fs/ntfs/dir.c:86!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 3 PID: 758 Comm: a.out Not tainted 5.19.0-next-20220808 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:ntfs_lookup_inode_by_name+0xd11/0x2d10
Code: ff e9 b9 01 00 00 e8 1e fe d6 fe 48 8b 7d 98 49 8d 5d 07 e8 91 85 29 ff 48 c7 45 98 00 00 00 00 e9 5a fb ff ff e8 ff fd d6 fe <0f> 0b e8 f8 fd d6 fe 0f 0b e8 f1 fd d6 fe 48 8b b5 50 ff ff ff 4c
RSP: 0018:ffff888079607978 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000008000 RCX: 0000000000000000
RDX: ffff88807cf10000 RSI: ffffffff82a4a081 RDI: 0000000000000003
RBP: ffff888079607a70 R08: 0000000000000001 R09: ffff88807a6d01d7
R10: ffffed100f4da03a R11: 0000000000000000 R12: ffff88800f0fb110
R13: ffff88800f0ee000 R14: ffff88800f0fb000 R15: 0000000000000001
FS:  00007f33b63c7540(0000) GS:ffff888108580000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f33b635c090 CR3: 000000000f39e005 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 load_system_files+0x1f7f/0x3620
 ntfs_fill_super+0xa01/0x1be0
 mount_bdev+0x36a/0x440
 ntfs_mount+0x3a/0x50
 legacy_get_tree+0xfb/0x210
 vfs_get_tree+0x8f/0x2f0
 do_new_mount+0x30a/0x760
 path_mount+0x4de/0x1880
 __x64_sys_mount+0x2b3/0x340
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f33b62ff9ea
Code: 48 8b 0d a9 f4 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 76 f4 0b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd0c471aa8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f33b62ff9ea
RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffd0c471be0
RBP: 00007ffd0c471c60 R08: 00007ffd0c471ae0 R09: 00007ffd0c471c24
R10: 0000000000000000 R11: 0000000000000202 R12: 000055bac5afc160
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Fix this by adding sanity check on extended system files' directory inode
to ensure that it is directory, just like ntfs_extend_init() when mounting
ntfs3.

Link: https://lkml.kernel.org/r/20220809064730.2316892-1-chenxiaosong2@huawei.com
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: integrator: Tag PCI host with device_type

commit 4952aa696a9f221c5e34e5961e02fca41ef67ad6 upstream.

The DT parser is dependent on the PCI device being tagged as
device_type = "pci" in order to parse memory ranges properly.
Fix this up.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220919092608.813511-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sgx: Do not fail on incomplete sanitization on premature stop of ksgxd

commit 133e049a3f8c91b175029fb6a59b6039d5e79cba upstream.

Unsanitized pages trigger WARN_ON() unconditionally, which can panic the
whole computer, if /proc/sys/kernel/panic_on_warn is set.

In sgx_init(), if misc_register() fails or misc_register() succeeds but
neither sgx_drv_init() nor sgx_vepc_init() succeeds, then ksgxd will be
prematurely stopped. This may leave unsanitized pages, which will result a
false warning.

Refine __sgx_sanitize_pages() to return:

1. Zero when the sanitization process is complete or ksgxd has been
   requested to stop.
2. The number of unsanitized pages otherwise.

Fixes: 51ab30eb2ad4 ("x86/sgx: Replace section->init_laundry_list with sgx_dirty_page_list")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-sgx/20220825051827.246698-1-jarkko@kernel.org/T/#u
Link: https://lkml.kernel.org/r/20220906000221.34286-2-jarkko@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: ingenic-tcu: Properly enable registers before accessing timers

commit 6726d552a6912e88cf63fe2bda87b2efa0efc7d0 upstream.

Access to registers is guarded by ingenic_tcu_{enable,disable}_regs()
so the stop bit can be cleared before accessing a timer channel, but
those functions did not clear the stop bit on SoCs with a global TCU
clock gate.

Testing on the X1000 has revealed that the stop bits must be cleared
_and_ the global TCU clock must be ungated to access timer registers.
This appears to be the norm on Ingenic SoCs, and is specified in the
documentation for the X1000 and numerous JZ47xx SoCs.

If the stop bit isn't cleared, register writes don't take effect and
the system can be left in a broken state, eg. the watchdog timer may
not run.

The bug probably went unnoticed because stop bits are zeroed when
the SoC is reset, and the kernel does not set them unless a timer
gets disabled at runtime. However, it is possible that a bootloader
or a previous kernel (if using kexec) leaves the stop bits set and
we should not rely on them being cleared.

Fixing this is easy: have ingenic_tcu_{enable,disable}_regs() always
clear the stop bit, regardless of the presence of a global TCU gate.

Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 4f89e4b8f121 ("clk: ingenic: Add driver for the TCU clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220617122254.738900-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: c_can: don't cache TX messages for C_CAN cores

commit 81d192c2ce74157e717e1fc4b68791f82f7499d4 upstream.

As Jacob noticed, the optimization introduced in 387da6bc7a82 ("can:
c_can: cache frames to operate as a true FIFO") doesn't properly work
on C_CAN, but on D_CAN IP cores. The exact reasons are still unknown.

For now disable caching if CAN frames in the TX path for C_CAN cores.

Fixes: 387da6bc7a82 ("can: c_can: cache frames to operate as a true FIFO")
Link: https://lore.kernel.org/all/20220928083354.1062321-1-mkl@pengutronix.de
Link: https://lore.kernel.org/all/15a8084b-9617-2da1-6704-d7e39d60643b@gmail.com
Reported-by: Jacob Kroon <jacob.kroon@gmail.com>
Tested-by: Jacob Kroon <jacob.kroon@gmail.com>
Cc: stable@vger.kernel.org # v5.15
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address

commit e62563db857f81d75c5726a35bc0180bed6d1540 upstream.

Both i.MX6 and i.MX8 reference manuals list 0xBF8 as SNVS_HPVIDR1
(chapters 57.9 and 6.4.5 respectively).

Without this, trying to read the revision number results in 0 on
all revisions, causing the i.MX6 quirk to apply on all platforms,
which in turn causes the driver to synthesise power button release
events instead of passing the real one as they happen even on
platforms like i.MX8 where that's not wanted.

Fixes: 1a26c920717a ("Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q")
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4599101.ElGaqSPkdT@pliszka
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455

commit 797666cd5af041ffb66642fff62f7389f08566a2 upstream.

Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Cc: stable@vger.kernel.org
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220926150740.6684-3-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Explicitly reset plug events delay back to USB4 spec value

commit 31f87f705b3c1635345d8e8a493697099b43e508 upstream.

If any software has interacted with the USB4 registers before the Linux
USB4 CM runs, it may have modified the plug events delay. It has been
observed that if this value too large, it's possible that hotplugged
devices will negotiate a fallback mode instead in Linux.

To prevent this, explicitly align the plug events delay with the USB4
spec value of 10ms.

Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Remove incorrect warning

commit 415ba26cb73f7d22a892043301b91b57ae54db02 upstream.

Sink only devices do not have any source capabilities, so
the driver should not warn about that. Also DRP (Dual Role
Power) capable devices, such as USB Type-C docking stations,
do not return any source capabilities unless they are
plugged to a power supply themselves.

Fixes: 1f4642b72be7 ("usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220922145924.80667-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uas: ignore UAS for Thinkplus chips

commit 0fb9703a3eade0bb84c635705d9c795345e55053 upstream.

The UAS mode of Thinkplus(0x17ef, 0x3899) is reported to influence
performance and trigger kernel panic on several platforms with the
following error message:

[   39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled
               endpoint or incorrect stream ring
[   39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000
               1b000000 05038000

[  720.545894][13] Workqueue: usb_hub_wq hub_event
[  720.550971][13]  ffff88026c143c38 0000000000016300 ffff8802755bb900 ffff880
                    26cb80000
[  720.559673][13]  ffff88026c144000 ffff88026ca88100 0000000000000000 ffff880
                    26cb80000
[  720.568374][13]  ffff88026cb80000 ffff88026c143c50 ffffffff8186ae25 ffff880
                    26ca880f8
[  720.577076][13] Call Trace:
[  720.580201][13]  [<ffffffff8186ae25>] schedule+0x35/0x80
[  720.586137][13]  [<ffffffff8186b0ce>] schedule_preempt_disabled+0xe/0x10
[  720.593623][13]  [<ffffffff8186cb94>] __mutex_lock_slowpath+0x164/0x1e0
[  720.601012][13]  [<ffffffff8186cc3f>] mutex_lock+0x2f/0x40
[  720.607141][13]  [<ffffffff8162b8e9>] usb_disconnect+0x59/0x290

Falling back to USB mass storage can solve this problem, so ignore UAS
function of this chip.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663902249837086.19.seg@mailgw
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS

commit e00b488e813f0f1ad9f778e771b7cd2fe2877023 upstream.

The UAS mode of Hiksemi USB_HDD is reported to fail to work on several
platforms with the following error message, then after re-connecting the
device will be offlined and not working at all.

[  592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
                   inflight: CMD
[  592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
                   04 00 00
[  592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
                   inflight: CMD
[  592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
                   00 08 00

These disks have a broken uas implementation, the tag field of the status
iu-s is not set properly,so we need to fall-back to usb-storage.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663901185-21067-1-git-send-email-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uas: add no-uas quirk for Hiksemi usb_disk

commit a625a4b8806cc1e928b7dd2cca1fee709c9de56e upstream.

The UAS mode of Hiksemi is reported to fail to work on several platforms
with the following error message, then after re-connecting the device will
be offlined and not working at all.

[  592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
                   inflight: CMD
[  592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
                   04 00 00
[  592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
                   inflight: CMD
[  592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
                   00 08 00

These disks have a broken uas implementation, the tag field of the status
iu-s is not set properly,so we need to fall-back to usb-storage.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663901173-21020-1-git-send-email-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: cgroup_get_from_id() must check the looked-up kn is a directory

[ Upstream commit df02452f3df069a59bc9e69c84435bf115cb6e37 ]

cgroup has to be one kernfs dir, otherwise kernel panic is caused,
especially cgroup id is provide from userspace.

Reported-by: Marco Patalano <mpatalan@redhat.com>
Fixes: 6b658c4863c1 ("scsi: cgroup: Add cgroup_get_from_id()")
Cc: Muneendra <muneendra.kumar@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: reduce dependency on cgroup_mutex

[ Upstream commit be288169712f3dea0bc6b50c00b3ab53d85f1435 ]

Currently cgroup_get_from_path() and cgroup_get_from_id() grab
cgroup_mutex before traversing the default hierarchy to find the
kernfs_node corresponding to the path/id and then extract the linked
cgroup. Since cgroup_mutex is still held, it is guaranteed that the
cgroup will be alive and the reference can be taken on it.

However similar guarantee can be provided without depending on the
cgroup_mutex and potentially reducing avenues of cgroup_mutex contentions.
The kernfs_node's priv pointer is RCU protected pointer and with just
rcu read lock we can grab the reference on the cgroup without
cgroup_mutex. So, remove cgroup_mutex from them.

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Stable-dep-of: df02452f3df0 ("cgroup: cgroup_get_from_id() must check the looked-up kn is a directory")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek: fix speakers and micmute on HP 855 G8

[ Upstream commit 91502a9a0b0d5252cf3f32ebd898823c2f5aadab ]

There are several PCI ids associated with HP EliteBook 855 G8 Notebook
PC. Commit 0e68c4b11f1e6 ("ALSA: hda/realtek: fix mute/micmute LEDs for
HP 855 G8") covers 0x103c:0x8896, while this commit covers 0x103c:0x8895
which needs some additional work on top of the quirk from 0e68c4b11f1e6.

Note that the device can boot up with working speakers and micmute LED
without this patch, but the success rate would be quite low (order of
16 working boots across 709 boots) at least for the built-in drivers
scenario. This also means that there are some timing issues during early
boot and this patch is a workaround.

With this patch applied speakers and headphones are consistenly working,
as well as mute/micmute LEDs and the internal microphone.

Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com>
Link: https://lore.kernel.org/r/20220114165050.ouw2nknuspclynro@localhost.localdomain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 496322302bf1 ("ALSA: hda/realtek: Add a quirk for HP OMEN 16 (8902) mute LED")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Fix Nvidia dp infoframe

[ Upstream commit f89e409402e2aeb3bc3aa44d2b7a597959e4e6af ]

Nvidia HDA HW expects infoframe data bytes order same for both
HDMI and DP i.e infoframe data starts from 5th bytes offset. As
dp infoframe structure has 4th byte as valid infoframe data, use
hdmi infoframe structure for nvidia dp infoframe to match HW behvaior.

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913065818.13015-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Fix hang at HD-audio codec unbinding due to refcount saturation

[ Upstream commit ead3d3c5b54f76da79c079e61bacb4279ec56965 ]

We fixed the potential deadlock at dynamic unbinding the HD-audio
codec at the commit 7206998f578d ("ALSA: hda: Fix potential deadlock
at codec unbinding"), but ironically, this caused another potential
deadlock.  The current code uses refcount_dec() and waits for the
pending task with wait_event for dropping the refcount to 0.  This
works fine when PCMs are assigned and actually waiting for the
refcount drop.

Meanwhile, when there was no PCM assigned, the refcount_dec() call
itself was supposed to drop to zero -- alas, it doesn't in reality;
refcount_dec() complains, spews kernel warning and it saturates
instead of dropping to 0, due to the nature of refcount_dec()
implementation.  This eventually blocks the wait_event() wakeup and
the code get stuck there.

For avoiding the problem, we call refcount_dec_and_test() and skips
the sync-wait if it already reaches to zero.

The patch does a slight code reshuffling to make sure to invoke other
disconnect calls before the sync-wait, too.

Fixes: 7206998f578d ("ALSA: hda: Fix potential deadlock at codec unbinding")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YxtflWQnslMHVlU7@intel.com
Link: https://lore.kernel.org/r/20220910142550.28494-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Do disconnect jacks at codec unbind

[ Upstream commit 37c4fd0db7c961145d9d1909ecab386fdf703c26 ]

The HD-audio codec driver remove may happen also at dynamically
unbinding during operation, hence it needs manual triggers of
snd_device_disconnect() calls, while it's missing for the jack objects
that are associated with the codec.

This patch adds the manual disconnection call for jacks when the
remove happens without card->shutdown (i.e. not under the full
removal).

Link: https://lore.kernel.org/r/20211117133040.20272-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: ead3d3c5b54f ("ALSA: hda: Fix hang at HD-audio codec unbinding due to refcount saturation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.71

Link: https://lore.kernel.org/r/20220926100756.074519146@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220926163551.791017156@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: use locality group preallocation for small closed files

commit a9f2a2931d0e197ab28c6007966053fdababd53f upstream.

Curently we don't use any preallocation when a file is already closed
when allocating blocks (from writeback code when converting delayed
allocation). However for small files, using locality group preallocation
is actually desirable as that is not specific to a particular file.
Rather it is a method to pack small files together to reduce
fragmentation and for that the fact the file is closed is actually even
stronger hint the file would benefit from packing. So change the logic
to allow locality group preallocation in this case.

Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: avoid unnecessary spreading of allocations among groups

commit 1940265ede6683f6317cba0d428ce6505eaca944 upstream.

mb_set_largest_free_order() updates lists containing groups with largest
chunk of free space of given order. The way it updates it leads to
always moving the group to the tail of the list. Thus allocations
looking for free space of given order effectively end up cycling through
all groups (and due to initialization in last to first order). This
spreads allocations among block groups which reduces performance for
rotating disks or low-end flash media. Change
mb_set_largest_free_order() to only update lists if the order of the
largest free chunk in the group changed.

Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: make mballoc try target group first even with mb_optimize_scan

commit 4fca50d440cc5d4dc570ad5484cc0b70b381bc2a upstream.

One of the side-effects of mb_optimize_scan was that the optimized
functions to select next group to try were called even before we tried
the goal group. As a result we no longer allocate files close to
corresponding inodes as well as we don't try to expand currently
allocated extent in the same group. This results in reaim regression
with workfile.disk workload of upto 8% with many clients on my test
machine:

                     baseline               mb_optimize_scan
Hmean     disk-1       2114.16 (   0.00%)     2099.37 (  -0.70%)
Hmean     disk-41     87794.43 (   0.00%)    83787.47 *  -4.56%*
Hmean     disk-81    148170.73 (   0.00%)   135527.05 *  -8.53%*
Hmean     disk-121   177506.11 (   0.00%)   166284.93 *  -6.32%*
Hmean     disk-161   220951.51 (   0.00%)   207563.39 *  -6.06%*
Hmean     disk-201   208722.74 (   0.00%)   203235.59 (  -2.63%)
Hmean     disk-241   222051.60 (   0.00%)   217705.51 (  -1.96%)
Hmean     disk-281   252244.17 (   0.00%)   241132.72 *  -4.41%*
Hmean     disk-321   255844.84 (   0.00%)   245412.84 *  -4.08%*

Also this is causing huge regression (time increased by a factor of 5 or
so) when untarring archive with lots of small files on some eMMC storage
cards.

Fix the problem by making sure we try goal group first.

Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/20220727105123.ckwrhbilzrxqpt24@quack3/
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: limit the number of retries after discarding preallocations blocks

commit 80fa46d6b9e7b1527bfd2197d75431fd9c382161 upstream.

This patch avoids threads live-locking for hours when a large number
threads are competing over the last few free extents as they blocks
getting added and removed from preallocation pools.  From our bug
reporter:

   A reliable way for triggering this has multiple writers
   continuously write() to files when the filesystem is full, while
   small amounts of space are freed (e.g. by truncating a large file
   -1MiB at a time). In the local filesystem, this can be done by
   simply not checking the return code of write (0) and/or the error
   (ENOSPACE) that is set. Over NFS with an async mount, even clients
   with proper error checking will behave this way since the linux NFS
   client implementation will not propagate the server errors [the
   write syscalls immediately return success] until the file handle is
   closed. This leads to a situation where NFS clients send a
   continuous stream of WRITE rpcs which result in ERRNOSPACE -- but
   since the client isn't seeing this, the stream of writes continues
   at maximum network speed.

   When some space does appear, multiple writers will all attempt to
   claim it for their current write. For NFS, we may see dozens to
   hundreds of threads that do this.

   The real-world scenario of this is database backup tooling (in
   particular, github.com/mdkent/percona-xtrabackup) which may write
   large files (>1TiB) to NFS for safe keeping. Some temporary files
   are written, rewound, and read back -- all before closing the file
   handle (the temp file is actually unlinked, to trigger automatic
   deletion on close/crash.) An application like this operating on an
   async NFS mount will not see an error code until TiB have been
   written/read.

   The lockup was observed when running this database backup on large
   filesystems (64 TiB in this case) with a high number of block
   groups and no free space. Fragmentation is generally not a factor
   in this filesystem (~thousands of large files, mostly contiguous
   except for the parts written while the filesystem is at capacity.)

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0

commit 29a5b8a137ac8eb410cc823653a29ac0e7b7e1b0 upstream.

When walking through an inode extents, the ext4_ext_binsearch_idx() function
assumes that the extent header has been previously validated.  However, there
are no checks that verify that the number of entries (eh->eh_entries) is
non-zero when depth is > 0.  And this will lead to problems because the
EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this:

[  135.245946] ------------[ cut here ]------------
[  135.247579] kernel BUG at fs/ext4/extents.c:2258!
[  135.249045] invalid opcode: 0000 [#1] PREEMPT SMP
[  135.250320] CPU: 2 PID: 238 Comm: tmp118 Not tainted 5.19.0-rc8+ #4
[  135.252067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[  135.255065] RIP: 0010:ext4_ext_map_blocks+0xc20/0xcb0
[  135.256475] Code:
[  135.261433] RSP: 0018:ffffc900005939f8 EFLAGS: 00010246
[  135.262847] RAX: 0000000000000024 RBX: ffffc90000593b70 RCX: 0000000000000023
[  135.264765] RDX: ffff8880038e5f10 RSI: 0000000000000003 RDI: ffff8880046e922c
[  135.266670] RBP: ffff8880046e9348 R08: 0000000000000001 R09: ffff888002ca580c
[  135.268576] R10: 0000000000002602 R11: 0000000000000000 R12: 0000000000000024
[  135.270477] R13: 0000000000000000 R14: 0000000000000024 R15: 0000000000000000
[  135.272394] FS:  00007fdabdc56740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
[  135.274510] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  135.276075] CR2: 00007ffc26bd4f00 CR3: 0000000006261004 CR4: 0000000000170ea0
[  135.277952] Call Trace:
[  135.278635]  <TASK>
[  135.279247]  ? preempt_count_add+0x6d/0xa0
[  135.280358]  ? percpu_counter_add_batch+0x55/0xb0
[  135.281612]  ? _raw_read_unlock+0x18/0x30
[  135.282704]  ext4_map_blocks+0x294/0x5a0
[  135.283745]  ? xa_load+0x6f/0xa0
[  135.284562]  ext4_mpage_readpages+0x3d6/0x770
[  135.285646]  read_pages+0x67/0x1d0
[  135.286492]  ? folio_add_lru+0x51/0x80
[  135.287441]  page_cache_ra_unbounded+0x124/0x170
[  135.288510]  filemap_get_pages+0x23d/0x5a0
[  135.289457]  ? path_openat+0xa72/0xdd0
[  135.290332]  filemap_read+0xbf/0x300
[  135.291158]  ? _raw_spin_lock_irqsave+0x17/0x40
[  135.292192]  new_sync_read+0x103/0x170
[  135.293014]  vfs_read+0x15d/0x180
[  135.293745]  ksys_read+0xa1/0xe0
[  135.294461]  do_syscall_64+0x3c/0x80
[  135.295284]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

This patch simply adds an extra check in __ext4_ext_check(), verifying that
eh_entries is not 0 when eh_depth is > 0.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215941
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216283
Cc: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20220822094235.2690-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: make directory inode spreading reflect flexbg size

commit 613c5a85898d1cd44e68f28d65eccf64a8ace9cf upstream.

Currently the Orlov inode allocator searches for free inodes for a
directory only in flex block groups with at most inodes_per_group/16
more directory inodes than average per flex block group. However with
growing size of flex block group this becomes unnecessarily strict.
Scale allowed difference from average directory count per flex block
group with flex block group size as we do with other metrics.

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devdax: Fix soft-reservation memory description

commit 67feaba413ec68daf4124e9870878899b4ed9a0e upstream.

The "hmem" platform-devices that are created to represent the
platform-advertised "Soft Reserved" memory ranges end up inserting a
resource that causes the iomem_resource tree to look like this:

340000000-43fffffff : hmem.0
  340000000-43fffffff : Soft Reserved
    340000000-43fffffff : dax0.0

This is because insert_resource() reparents ranges when they completely
intersect an existing range.

This matters because code that uses region_intersects() to scan for a
given IORES_DESC will only check that top-level 'hmem.0' resource and
not the 'Soft Reserved' descendant.

So, to support EINJ (via einj_error_inject()) to inject errors into
memory hosted by a dax-device, be sure to describe the memory as
IORES_DESC_SOFT_RESERVED. This is a follow-on to:

commit b13a3e5fd40b ("ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP")

...that fixed EINJ support for "Soft Reserved" ranges in the first
instance.

Fixes: 262b45ae3ab4 ("x86/efi: EFI soft reservation to E820 enumeration")
Reported-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com>
Tested-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Omar Avelar <omar.avelar@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Mark Gross <markgross@kernel.org>
Link: https://lore.kernel.org/r/166397075670.389916.7435722208896316387.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Fixes for nfs4_inode_return_delegation()

commit 6e176d47160cec8bcaa28d9aa06926d72d54237c upstream.

We mustn't call nfs_wb_all() on anything other than a regular file.
Furthermore, we can exit early when we don't hold a delegation.

Reported-by: David Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>