Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-tegra

Merge branch '2023-02-23-assorted-fixes'

- btrfs bugfix, silence a bunch of gcc-12.2 linker warnings finally,
  relax one of the trace test time requirements (so CI doesn't fail due
  to test being slightly slow, but still correct), and correct env on
  MMC and checking for where GPT can be

ARM: tegra20: implement BCT patching

This function allows updating bootloader from u-boot
on production devices without need in host PC.

Be aware! It works only with re-crypt BCT.

Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Signed-off-by: Ramin Khonsari <raminterex@yahoo.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: tegra30: implement BCT patching

This function allows updating bootloader from u-boot
on production devices without need in host PC.

Be aware! It works only with re-crypted BCT.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Ramin Khonsari <raminterex@yahoo.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: tegra: crypto: extend crypto functional

Add support for encryption, decryption and signinig with
non-zero key saving backward compatibility.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: tegra: expose crypto module for all Tegra SoCs

Move crypto module from T20 only into common Tegra dir.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

board: tegra30: switch to updated pre-dm i2c write

Configure PMIC voltages for early stages using updated
early i2c write.

Tested-by: Thierry Reding <treding@nvidia.com> # Beaver T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom <twarren@nvidia.com>

board: tegra124: switch to updated pre-dm i2c write

Configure PMIC for early stages using updated i2c write.

Tested-by: Thierry Reding <treding@nvidia.com> # Jetson TK1 T124
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: tegra: create common pre-dm i2c write

This implementation allows pwr i2c writing on early SPL
stages when DM is not yet setup.

Such writing is needed to configure main voltages of PMIC
on early SPL for bootloader to boot properly.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Tested-by: Thierry Reding <treding@nvidia.com> # T30 and T124
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: tegra: add late init support

Late init function allows passing values like identifiers and
perform device specific configurations of pre-boot stage.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: tegra: provide default USB gadget setup

All Nvidia boards use the same manufacturer, vendor ID and product ID
for the gadgets. Make them the defaults to remove some boilerplate from
the defconfigs.

Inspired by commit e02687bda96c ("sunxi: provide default USB gadget
setup") which did the same for Allwinner boards.

Tested-by: Thierry Reding <treding@nvidia.com> # T30 and T124
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

spi: tegra20_slink: accept any word length

Original t20 slink could work with commands only
fully divisible by 8. This patch removes such
restriction, so commands of any bitlength now
can be passed and processed.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF600T T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Tested-by: Thierry Reding <treding@nvidia.com> # T30 and T124
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: tegra: Fix Tegra PWM parent clock

Default parent clock for the PWM on Tegra is a 32kHz clock and
is unable to support the requested PWM period.

Fix PWM support on Tegra20, Tegra30, Tegra114, Tegra124 and Tegra210 by
updating the parent clock for the PWM to be the PLL_P.

This commit is equivalent to Linux kernel commit:
https://lore.kernel.org/all/20221010100046.6477-1-jonathanh@nvidia.com/

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30
Tested-by: Thierry Reding <treding@nvidia.com> # T30 and T124
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: tegra30: add PLLD to pll setup

On T30 unlike T20 dsi panels are wider used on devices
and PLLD is used as DISP1 parent more often, so lets
enable it as well for this cases.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF700T T30
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # HTC One X T30
Tested-by: Thierry Reding <treding@nvidia.com> # Beaver T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: tegra: clock: add clock_decode_pair helper

Get periph clock id and its parent from device tree.
This works by looking up the peripheral's 'clocks' node and
reading out the second and fourth cells, which are the
peripheral and PLL clock numbers.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # HTC One X
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: tegra: clock: add clk_id_to_pll_id helper

This function allows to convert a device tree clock ID to PLL ID.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # HTC One X
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

ARM: t20/t30: swap host1x and disp1 clock parents

According to mainline clock tables and TRM HOST1X
parent is PLLC, while DISP1 usually uses PLLP as
parent clock.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Tested-by: Thierry Reding <treding@nvidia.com> # Beaver T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom <twarren@nvidia.com>

tegra30: clock: add EXTPERIPH

This mappings were missing for some reason.

Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom <twarren@nvidia.com>

env: mmc: Apply GPT only on eMMC user HW partition

Apply the GPT U-Boot environment GUID type look up only on eMMC user
HW partition, do not apply the look up on eMMC boot HW partitions as
mmc_offset_try_partition() assumes either SD partitions or eMMC user
HW partition.

This fixes environment operation on systems where CONFIG_SYS_MMC_ENV_PART
is non-zero and CONFIG_SYS_REDUNDAND_ENVIRONMENT is set.

Fixes: 80105d8fd52 ("env: mmc: select GPT env partition by type guid")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

trace: Relax test requirements

We expect the profile and bootstage to agree on timing, but when
running on slow machines there can be a larger descrepency. Increase the
tolerance to fix this.

Fixes: 9cea4797aeb ("trace: Add a test")
Signed-off-by: Simon Glass <sjg@chromium.org>

x86: Pass -z execstack for EFI payload flags

To match how we link EFI executables elsewhere, and to silence a linker
warning, pass -z execstack here as well.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>

Makefile: Link with -z noexectack

When moving to gcc-12.2 we started trying to quiet some of the new
linker warnings, that are not relevant to us. However, a
misunderstanding of the mechanics at play meant that I intentionally
omitted passing -z noexecstack to the linker, when we do need to. Add
this flag and in turn remove warnings from the linker.

Fixes: 1e1c51f8ace8 ("Makefile: link with --no-warn-rwx-segments")
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

fs: btrfs: limit the mapped length to the original length

[BUG]
There is a bug report that btrfs driver caused hang during file read:

  This breaks btrfs on the HiFive Unmatched.

  => pci enum
  PCIE-0: Link up (Gen1-x8, Bus0)
  => nvme scan
  => load nvme 0:2 0x8c000000 /boot/dtb/sifive/hifive-unmatched-a00.dtb
  [hangs]

[CAUSE]
The reporter provided some debug output:

  read_extent_data: cur=615817216, orig_len=16384, cur_len=16384
  read_extent_data: btrfs_map_block: cur_len=479944704; ret=0
  read_extent_data: ret=0
  read_extent_data: cur=615833600, orig_len=4096, cur_len=4096
  read_extent_data: btrfs_map_block: cur_len=479928320; ret=0

Note the second and the last line, the @cur_len is 450+MiB, which is
almost a chunk size.

And inside __btrfs_map_block(), we limits the returned value to stripe
length, but that's depending on the chunk type:

if (map->type & (BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID1 |
 BTRFS_BLOCK_GROUP_RAID1C3 | BTRFS_BLOCK_GROUP_RAID1C4 |
 BTRFS_BLOCK_GROUP_RAID5 | BTRFS_BLOCK_GROUP_RAID6 |
 BTRFS_BLOCK_GROUP_RAID10 |
 BTRFS_BLOCK_GROUP_DUP)) {
/* we limit the length of each bio to what fits in a stripe */
*length = min_t(u64, ce->size - offset,
      map->stripe_len - stripe_offset);
} else {
*length = ce->size - offset;
}

This means, if the chunk is SINGLE profile, then we don't limit the
returned length at all, and even for other profiles, we can still return
a length much larger than the requested one.

[FIX]
Properly clamp the returned length, preventing it from returning a much
larger range than expected.

Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>

Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-usb

- DWC3 bugfix

Merge https://source.denx.de/u-boot/custodians/u-boot-socfpga

- chameleonv3 updates

chameleonv3: Convert CONFIG_SPL_MAX_SIZE to Kconfig

This file was missed during the conversion process. Add the symbol to
defconfig.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm: dts: chameleonv3: Add 270-2 variant

Add devicetree for chameleonv3 with the 270-2I2-D11E variant of the
Mercury+ AA1 module

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm: dts: chameleonv3: Rename chameleonv3.dts to .dtsi

This file is included by the different chameleonv3 variants. Change the
name to .dtsi.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm: dts: chameleonv3: Override chameleonv3 bitstream names

Set the bitstream name per Chameleon variant. This allows the same
boot filesystem with all bitstream variants to be used on different
boards.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

socfpga: chameleonv3: Move environment to a text file

Move the environment to an easily editable text file in the boot
partition

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

socfpga: chameleonv3: Enable ext4 in SPL

Allow SPL to boot from an ext4 filesystem.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

usb: dwc3: Use the devm_gpiod_get_optional() API for reset gpio

As the "reset-gpios" property is optional, don't return the
error and just skip the gpio reset sequence.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>

Merge tag 'efi-2023-04-rc3' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-04-rc3

Documentation

* Add a document for the RISC-V architecture
* Move gateworks and bcm7xxx documentation to HTML

UEFI

* measure the loaded device-tree
* make CapsuleMax configurable and provide sensible default

doc: remove superfluous warning

We have been using Sphinx >=3 since 2020. We don't expect issues.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

efi_loader: set CapsuleMax from CONFIG_EFI_CAPSULE_MAX

Adds CONFIG_EFI_CAPSULE_MAX to configure the max index value used in
EFI capsule reports. Prior to this change is the hard coded value was
65535 which would exceed available storage for variables. Now the
default value is 15 which should work fine with most systems.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>

efi_loader: Measure the loaded DTB

Measures the DTB passed to the EFI application upon new boolean config
switch CONFIG_EFI_TCG2_PROTOCOL_MEASURE_DTB. For platforms where the
content of the DTB passed to the OS can change across reboots, there is
not point measuring it hence the config switch to allow platform to not
embed this feature.

Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

efi_loader: fix wrong attribute check for QueryVariableInfo

QueryVariableInfo with EFI_VARIABLE_HARDWARE_ERROR_RECORD is
accepted, remove wrong attribute check.

Fixes: 454a9442fbce ("efi_loader: update attribute check for QueryVariableInfo()")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

efi_loader: avoid buffer overrun in efi_var_mem_compare

We should not scan beyond the end of string name.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

doc: arch: Add document for RISC-V architecture

This patch adds a brief introduction to the RISC-V architecture and
the typical boot process used on a variety of RISC-V platforms.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

board: gateworks: venice: move README to RST

Move board/gateworks/venice/README to RST documentation.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

doc: board: bcm7xxx: Convert to reStructuredText format

Convert the documentation for the Broadcom BCM7445 and BCM7260 boards
to reStructuredText format and add the new filename to
doc/board/broadcom/index.rst.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

doc: devicetree: dt_qemu.rst: Fix the typo and space

Fix typo and whitespace in the document.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Merge branch '2023-02-17-assorted-fixes'

- avb_verify bugfix, and cpsw_mdio bugfix

common: avb_verify: prevent opening incorrect session

The arg->session is not valid if arg->ret != NULL, so can't be
assigned, correct this.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@globallogic.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>

cpsw_mdio.c: Use correct reg in cpsw_mdio_get_alive

cpsw_mdio_get_alive reads the wrong register.
See page 2316 in SPRUH73Q AM335x TRM

Signed-off-by: Ulf Samuelsson <ulf@emagii.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge https://source.denx.de/u-boot/custodians/u-boot-riscv

- binman: Add help message if opensbi is absent when building u-boot SPL
- AndesTech: rename cpu and board name to 'andesv5' and 'ae350'
- Clean up cache operation for Andes ae350 platform

riscv: binman: Add help message for missing blobs

Add the 'missing-msg' for more detailed output
on missing system firmware.

Signed-off-by: Rick Chen <rick@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>

riscv: ae350: Adjust the memory layout of ae350

Adjust the initial stack pointer address to 0x10000000(256M)

Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

riscv: Rename Andes cpu and board names

The current ae350-related defconfigs could also
support newer Andes CPU IP, so modify the names of CPU
from ax25 to andesv5, and board name from ax25-ae350 to ae350.

Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

driver: cache-v5l2: Fix type casting warning on RV32

This patch fixes following warning for the riscv32 toolchain.

drivers/cache/cache-v5l2.c:122:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  122 |         regs = (struct l2cache *)dev_read_addr(dev);
      |                ^

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

configs: ae350: Display CPU and board info for AE350 platforms

Display information about CPU and board during start up.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

configs: ae350: Increase maximum retry count for AE350 platforms

Loading an image via TFTP is often interrupted when retrying more than
10 times, increase the number of retries so that it does not simply stop
the transfer.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

configs: ae350: Enable v5l2 cache for AE350 platforms in SPL

To reduce the code size, CONFIG_V5L2_CACHE was disabled since commit:
ca06444aac2c643db3a3f2eb37afc60fae15177e

Turing on does not significantly increase the size of u-boot-spl.bin,
so we enable it by default to improve performance.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

riscv: ax25: cache.c: Cleanups to L1/L2 cache function used in SPL

This patch refines L1 cache enable/disable and v5l2-cache enable
functions.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

riscv: ae350: dts: Update L2 cache compatible string

Update the compatible string of L2 cache.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

riscv: cpu: ax25: Simplify cache enabling logic in harts_early_init()

As the OpenSBI v1.2 does not enable the cache [0], we enable
the i/d-cache in harts_early_init() and do not disable in
cleanup_before_linux(). This patch also simplifies the logic
and moves the CSR encoding to include/asm/arch-andes/csr.h.

[0] https://github.com/riscv-software-src/opensbi/commit/bd7ef4139829da5c30fa980f7498d385124408fa

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

driver: cache: cache-v5l2: Update memory-mapped scheme to support Gen2 platform

The L2C configuration register has MAP field to indicate its version
is v0 (Gen1) or v1 (Gen2) L2-cache. This patch makes the driver
compatible with both memory-mapped scheme.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

board: AndesTech: ax25-ae350.c: Enable v5l2-cache in spl_board_init()

The L2-cache is not enabled currently, the enbale_caches() will call
the v5l2_enable() callback to enable it in SPL.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

riscv: Remove redundant Kconfig "RISCV_NDS_CACHE"

There is no need for RISCV_NDS_CACHE config to control cache switches.

Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

riscv: global_data.h: Correct the comment for PLICSW

PLIC is used for external interrupt, while PLICSW is an Andes-specific
design for software interrupt.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>

Prepare v2023.04-rc2

Signed-off-by: Tom Rini <trini@konsulko.com>

clocks: qcs404: Add support for I2C clocks

Co-developed-by: Mike Worsfold <mworsfold@impinj.com>
Signed-off-by: Mike Worsfold <mworsfold@impinj.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

Merge tag 'i2c-updates-for-v2023.04' of https://source.denx.de/u-boot/custodians/u-boot-i2c

i2c updates for v2023.04

- add new i2c driver ast2600 from Ryan Chen

- i2c-cdns: make read fifo-depth configurable through device tree
  from Pei Yue Ho

- mxc i2c driver: print base address in hex, not in decimal
  from Fabio

Merge https://source.denx.de/u-boot/custodians/u-boot-marvell

- mvebu: Support for 2 new Armada 385 boards (Tony)
- mvebu: Minor misc board enhancements (Tony)
- kirkwood: Serial driver fixes (Kconfig & dtsi) (Tony)
- cmd: return code when tlv_eeprom incorrectly called (Heinrich)

arm: kirkwood: Enable uart0 dm-pre-reloc for Pogoplug V4 board

When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is
required for this board to boot over UART with kwboot. Enable this in
kirkwood-pogoplug-series-4-u-boot.dtsi.

Added by Stefan while applying:
Please note that it's not fully understood, why this property really
is needed. Here a link to the discussion about this:

https://lore.kernel.org/r/20230201080210.ypz4nrj4y2igwxz3@pali/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

arm: mvebu: Add support for Synology DS116 (Armada 385)

Synology DS116 is a NAS based on Marvell Armada 385 SoC.

Board Specification:

- Marvel MV88F6820 Dual Core at 1.8GHz
- 1 GiB DDR3 RAM
- 8MB Macronix mx25l6405d SPI flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvell 88E1510)
- 1x SATA (6 Gbps)
- 3x LED
- PIC16F1829 (connected to uart1)
- GPIO fan
- serial console

Note that this patch depends on the add-support for Thecus N2350 patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>

arm: mvebu: Power up 2nd SATA port for Thecus N2350

Currently, only the 1st SATA port is powered up (by GPIO1 12).
Add GPIO1 13 in board initialization to power up the 2nd SATA port.

Note that this patch depends on the initial add-support patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

arm: kirkwood: sheevaplug: reduce u-boot image size

Sheevaplug board has 512K CONFIG_BOARD_SIZE_LIMIT. Recently, DM_SERIAL has
pushed the image size a few hundred bytes over that limit. So explicitly
deselect some configs that are unrelated to this board
(and gain back a bit over 2K).

Signed-off-by: Tony Dinh <mibodhi@gmail.com>

arm: mvebu: Add support for Thecus N2350 (Armada 385) board

Thecus N2350 is a NAS based on Marvell Armada 385 SoC.

Specification:

- Processor: Marvel MV88F6820 Dual Core at 1GHz
- 1 GiB DDR4 RAM
- 4MB Macronix mx25l3205d SPI flash
- 512MB Hynix H27U4G8F2DTR-BC NAND flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvell 88E1510)
- 2x SATA (hot swap slots)
- 3x buttons
- 10x LEDS
- serial console

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

arm: kirkwood: Use CONFIG_SYS_NS16550 with DM_SERIAL for Kirkwood boards

CONFIG_SYS_NS16550 is required when DM_SERIAL is enabled for
Kirkwood boards.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>

cmd: return code when tlv_eeprom incorrectly called

A command called with incorrect parameters should set $? to 1 (false).
Instead of calling cmd_usage(cmdtp) and then returning 0 just return
CMD_RET_FAILURE.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>

i2c: i2c-cdns.c: Update driver to read fifo-depth from device tree

Enable driver to fetch the optional parameter (fifo-depth) from device
tree. If the parameter is not found in the device tree, it will use
the default value declared in the driver.

Signed-off-by: Pei Yue Ho <peiyue.ho@starfivetech.com>
Reviewed-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Reviewed-by: Eng Lee Teh <englee.teh@starfivetech.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

dt-bindings: i2c: i2c-cdns.txt: Add description for an optional parameter, fifo-depth

Add description for fifo-depth parameter that can be used
in the device tree.

Signed-off-by: Pei Yue Ho <peiyue.ho@starfivetech.com>
Reviewed-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Reviewed-by: Eng Lee Teh <englee.teh@starfivetech.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

arm: aspeed: dtsi: add reg for i2c

The i2c driver have global register that i2c bus use
ofnode_get_parent to get parent register address.

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

i2c:aspeed:support ast2600 i2c new register mode driver

Add i2c new register mode driver to support AST2600 i2c
new register mode. AST2600 i2c controller have legacy and
new register mode. The new register mode have global register
support 4 base clock for scl clock selection, and new clock
divider mode.

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>

i2c: mxc_i2c: Use hex notation for the base address

Printing the I2C controller base address in decimal notation
is not helpful.

Change it to hex notation, which is the standard format found
in the Reference Manual and devicetree.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

Merge tag 'dm-pull-12feb23' of https://source.denx.de/u-boot/custodians/u-boot-dm

minor changes to fdt command and binman

cmd: fdt: allow standalone "fdt move"

At the moment every subcommand of "fdt", except "addr" itself, requires
the DT address to be set first. We explicitly check for that before even
comparing against the subcommands' string.
This early bailout also affects the "move" subcommand, even though that
does not require or rely on a previous call to "fdt addr". In fact it
even sets the FDT address to the target of the move command, so is a
perfect beginning for a sequence of fdt commands.

Move the check for a previously set FDT address to after we handle the
"move" command also, so we don't need a dummy call to "fdt addr" first,
before being able to move the devicetree.

This skips one pointless "fdt addr" call in scripts which aim to alter
the control DT, but need to copy it to a safe location first (for
instance to $fdt_addr_r).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

cmd: fdt: move: Use map_sysmem to convert pointers

The "fdt move" subcommand was using the provided DTB addresses directly,
without trying to "map" them into U-Boot's address space. This happened
to work since on the vast majority of "real" platforms there is a simple
1:1 mapping of VA to PAs, so either value works fine.

However this is not true on the sandbox, so the "fdt move" command fails
there miserably:
=> fdt addr $fdtcontroladdr
=> cp.l $fdtcontroladdr $fdt_addr_r 40  # simple memcpy works
=> fdt move $fdtcontroladdr $fdt_addr_r
Segmentation fault

Use the proper "map_sysmem" call to convert PAs to VAs, to make this
more robust in general and to enable operation in the sandbox.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

binman: Show the image name for the top-level section

At present we show 'main section' as the top-level section name. It may
be more helpful to show the actual image name. This is tricky because
Image is a parent class of Entry_section, so there is no distinction
between an image and a section.

Update it to show the image name.

Signed-off-by: Simon Glass <sjg@chromium.org>

socfpga: fix the serial console on DE1-SoC

Previously, the TX LED would flash but nothing would appear on the
serial port, and the board would appear dead with a build of the
socfpga_cyclone5_defconfig. I have verified that adding the frequency to
the uart will fix the serial console on my board.

Thanks to @ehoffman on the Rocketboards forum:
https://forum.rocketboards.org/t/cyclonev-programming-fpga-from-u-boot/2230/30

Signed-off-by: Jade Lovelace <lists@jade.fyi>
Reviewed-by: Marek Vasut <marex@denx.de>

Merge tag 'clk-2023.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-clk

Clock changes for 2023.04-rc1

This contains various fixes and small features. I've included a reset patch as
well since it was in the same series as a clock patch.

Merge branch 'for-2023.04' of https://source.denx.de/u-boot/custodians/u-boot-mpc8xx

- A fix for a long standing bug that has been exposed by commit
  50128aeb0f8 ("cyclic: get rid of cyclic_init()") preventing 8xx boards
  from booting since u-boot 2023.01
- A GPIO driver for powerpc 8xx chip
- Fixup for powerpc 8xx SPI driver
- A new powerpc 8xx board
- The two devices having that board.

reset: Allow reset_get_by_name() with NULL name

This allows devm_reset_control_get(dev, NULL) to work and get the first
reset control, which is common in code ported from Linux.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20230122000252.53642-2-samuel@sholland.org

clk: Allow clk_get_by_name() with NULL name

This allows devm_clock_get(dev, NULL) to work and get the first clock,
which is common in code ported from Linux.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20230122000252.53642-1-samuel@sholland.org

cmd: clk: probe the clock before dump them

The clock UCLASS need to be probed to allow availability of the
private data (struct clk *), get in show_clks() with dev_get_clk_ptr()
before use them.

Without this patch the clock dump can cause crash because all the
private data are not available before calling the API clk_get_rate().

It is the case for the SCMI clocks, priv->channel is needed for
scmi_clk_get_rate() and it is initialized only in scmi_clk_probe().
This issue causes a crash for "clk dump" command on STM32MP135F-DK board
for SCMI clock not yet probed.

Fixes: 1a725e229096 ("clk: fix clock tree dump to properly dump out every registered clock")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20221213145708.v2.1.Ia0bc6b272f1e2e3f37873c61d79138c2663c4055@changeid

clk: imx8mn: fix imx8mn_enet_phy_sels clocks list

[backport from linux commit 2626cf67f20b28446dfc3a5b9493dd535cdb747b]

According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):

     Clock Root         offset     Source Select (CCM_TARGET_ROOTn[MUX])
        ...              ...                    ...
 ENET_PHY_REF_CLK_ROOT  0xAA80            000 - 24M_REF_CLK
                                          001 - SYSTEM_PLL2_DIV20
                                          010 - SYSTEM_PLL2_DIV8
                                          011 - SYSTEM_PLL2_DIV5
                                          100 - SYSTEM_PLL2_DIV2
                                          101 - AUDIO_PLL1_CLK
                                          110 - VIDEO_PLL_CLK
                                          111 - AUDIO_PLL2_CLK
        ...              ...                    ...

while the imx8mn_enet_phy_sels list didn't contained audio_pll1_out for
source select bits 101b.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20221219113127.528282-4-dario.binacchi@amarulasolutions.com

clk: imx: rename video_pll1 to video_pll

[backport from linux commit bedcf9d1dcf88ed38731f0ac9620e5a421e1e9d6]

Unlike audio_pll1 and audio_pll2, there is no video_pll2. Further, the
name used in the RM is video_pll. So, let's rename "video_pll1" to
"video_pll" to be consistent with the RM and avoid misunderstandings.

No functional changes intended.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20221219113127.528282-3-dario.binacchi@amarulasolutions.com

clk: imx8mn: rename vpu_pll to m7_alt_pll

[backport from linux commit a429c60baefd95ab43a2ce7f25d5b2d7a2e431df]

The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20221219113127.528282-2-dario.binacchi@amarulasolutions.com

clk: nuvoton: fix bug for calculate pll clock

Fix bug for npcm7xx bmc calculate pll clock.
PLLCON1 need to divide by 2.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20221121091528.1351-1-JJLIU0@nuvoton.com

lmb: Treat a region which is a subset as equal

In various cases logical memory blocks are coalesced; As a result doing
a strict check whether memory blocks are the same doesn't necessarily
work as a previous addition of a given block might have been merged into
a bigger block.

Fix this by considering a block is already registered if it's a pure
subset of one of the existing blocks.

Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>

Merge branch '2023-02-10-update-trace-feature-to-work-with-trace-cmd'

To quote the author:
Since U-Boot's tracing feature was originally written, quite a few changes
have taken place in this domain. The original text format used by tracing
is still emitted by Linux, but a new trace-cmd tool has invented a binary
format which is now used by new tools, such as kernelshark.

With recent distributions and the move to Python 3, the old pybootchart
tool does not build or run. Unfortunately there is no 1:1 replacement for
the features that were provided by pybootchart, or at least it is not
obvious. Still, it makes sense to keep with the times.

This series updates proftool to use the new binary format, adding support
for function and funcgraph tracing, so that U-Boot's trace records can be
examined by trace-cmd and kernelshark.

This series also adds support for a flamegraph, which provides a visual
way to see which functions are called a lot, as well as which ones consume
the most time.

Some minor updates to the trace implementation within U-Boot are included,
to provide a little more information and to fix a few problems.

No unit tests are provided by proftool, but a functional test ensures that
sandbox can emit traces which can be processed by proftool, then parsed by
trace-cmd and that the timing of the various formats looks consistent.

CI, Docker: Update to Jammy 2023016 tag

Move to the latest tag for "Jammy" and rebuild the containers.

Signed-off-by: Tom Rini <trini@konsulko.com>

trace: Update documentation

Revamp the documentation for the new features, including a description of
the new features and documentation for the trace command.

Signed-off-by: Simon Glass <sjg@chromium.org>

trace: Add a test

Add a test which runs sandbox, collects a trace and makes sure it can
be processed by trace-cmd. This should ensure that this feature continues
to work as U-Boot and trace-cmd evolve.

Signed-off-by: Simon Glass <sjg@chromium.org>

Docker: Support trace-cmd

Build trace-cmd as part of the docker image, so that trace tests can be
used. Unfortunately the version provided by distributions is a little old
and has bugs. It also does not support specifying the time base for the
trace, which is required to convert microseconds to nanaseconds.

Signed-off-by: Simon Glass <sjg@chromium.org>

trace: Provide a flamegraph that uses timing

Add a second variant of the flame graph that shows records in terms of the
number of microseconds used by each call stack. This is a useful way of
seeing where time is going within the execution of U-Boot.

This requires a call stack that records the start time of each function,
as well as a way of subtracting all time consumed by child functions, so
that this time is not counted twice by the flamegraph. The time values in
the output are just for the function itself, not for its children.

Signed-off-by: Simon Glass <sjg@chromium.org>

trace: Support output of a flamegraph

It is useful to see how many times each function is called, particularly
in the context of its callers. A flamegraph is a way of showing this.

Support output in this format which can be used by the flamegraph.pl
script, to generate an SVG image for browsing.

Signed-off-by: Simon Glass <sjg@chromium.org>

trace: Support output of funcgraph records

Add support for writing ftrace records in the 'funcgraph' format, which
shows function entry and exit points as well as the time taken by each
function.

Signed-off-by: Simon Glass <sjg@chromium.org>