Johann Friedrichs [Thu, 21 Nov 2019 15:19:05 +0000 (16:19 +0100)]
media: dvb-core: Fix receiving invalid EIT-sections
Resetting buf without resetting pusi_seen at a channel-switch can lead
to copying the rest of a section to the start of buf, but treating it as
a complete section, when the next pusi arrives.
EIT-sections starting without valid header were randomly received during
an EIT-scan on a transponder.
Signed-off-by: Johann Friedrichs <johann.friedrichs@web.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel W. S. Almeida [Tue, 12 Nov 2019 19:54:45 +0000 (20:54 +0100)]
media: au8522: improve formatting
This patch fixes the following scripts/checkpatch.pl errors:
ERROR: space required before the open parenthesis '('
+ switch(input) {
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel W. S. Almeida [Tue, 26 Nov 2019 16:40:51 +0000 (17:40 +0100)]
media: Documentation: media: dtv-frontend.rst: fix a few minor typos
Fix a few minor typos throughout the document without changing the
meaning of the sentences.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel W. S. Almeida [Tue, 12 Nov 2019 19:52:48 +0000 (20:52 +0100)]
media: as102: improve formatting
This patch fixes the following scripts/checkpatch.pl error:
ERROR: open brace '{' following function definitions go on the next line
+static int as102_fe_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *settings) {
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel W. S. Almeida [Tue, 31 Dec 2019 19:11:23 +0000 (20:11 +0100)]
media: dvb_dummy_fe: change printk to pr_warn
Replaces printk with pr_err to fix warnings from checkpatch.pl
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel W. S. Almeida [Tue, 31 Dec 2019 19:11:22 +0000 (20:11 +0100)]
media: dvb_dummy_fe: Add blank line after declaration
Fix checkpatch.pl error by adding a blank line
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel W. S. Almeida [Tue, 31 Dec 2019 19:11:21 +0000 (20:11 +0100)]
media: dvb_dummy_fe: Fix ERROR: POINTER_LOCATION, AVOID_EXTERN and long lines
Change foo* bar to foo *bar to avoid ERROR: POINTER_LOCATION in checkpatch
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_signal_strength(struct dvb_frontend* fe, u16* strength)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_signal_strength(struct dvb_frontend* fe, u16* strength)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_snr(struct dvb_frontend* fe, u16* snr)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_snr(struct dvb_frontend* fe, u16* snr)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_sleep(struct dvb_frontend* fe)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_init(struct dvb_frontend* fe)
ERROR: "foo* bar" should be "foo *bar"
+static void dvb_dummy_fe_release(struct dvb_frontend* fe)
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = fe->demodulator_priv;
ERROR: "foo* bar" should be "foo *bar"
+struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void)
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = NULL;
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = NULL;
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = NULL;
remove 'extern' keyword from declaration
Fix CHECK:AVOID_EXTERNS: extern prototypes should be avoided in .h files
by removing it.
Fix long lines
Break long lines into smaller ones to improve readability.
WARNING: line over 80 characters
+ memcpy(&state->frontend.ops, &dvb_dummy_fe_ofdm_ops, sizeof(struct dvb_frontend_ops));
WARNING: line over 80 characters
+ memcpy(&state->frontend.ops, &dvb_dummy_fe_qpsk_ops, sizeof(struct dvb_frontend_ops));
WARNING: line over 80 characters
+ memcpy(&state->frontend.ops, &dvb_dummy_fe_qam_ops, sizeof(struct dvb_frontend_ops));
WARNING: line over 80 characters
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
WARNING: line over 80 characters
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
WARNING: line over 80 characters
+ FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
WARNING: line over 80 characters
+ .symbol_rate_min = (
57840000 / 2) / 6
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Wed, 1 Jan 2020 09:19:20 +0000 (10:19 +0100)]
media: dib0090: incorrect format specifier detected by clang
drivers/media/dvb-frontends/dib0090.c:1751:67: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("BB Offset Cal, BBreg=%hd,Offset=%hd,Value Set=%hd\n", state->dc->addr, state->adc_diff, state->step);
~~~ ^~~~~~~~~~~~~~~
%hhu
drivers/media/dvb-frontends/dib0090.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0090.c:1751:101: warning: format specifies type 'short' but the argument has type 's8' (aka 'signed char') [-Wformat]
dprintk("BB Offset Cal, BBreg=%hd,Offset=%hd,Value Set=%hd\n", state->dc->addr, state->adc_diff, state->step);
~~~ ^~~~~~~~~~~
%hhd
drivers/media/dvb-frontends/dib0090.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Wed, 1 Jan 2020 09:06:19 +0000 (10:06 +0100)]
media: dib0070: incorrect format specifiers detected by clang
drivers/media/dvb-frontends/dib0070.c:192:52: warning: format specifies type 'short' but the argument has type 's8' (aka 'signed char') [-Wformat]
dprintk("CAPTRIM=%hd; ADC = %hd (ADC) & %dmV\n", state->captrim, adc, (u32) adc*(u32)1800/(u32)1024);
~~~ ^~~~~~~~~~~~~~
%hhd
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:203:59: warning: format specifies type 'short' but the argument has type 's8' (aka 'signed char') [-Wformat]
dprintk("CAPTRIM=%hd is closer to target (%hd/%hd)\n", state->captrim, adc, state->adc_diff);
~~~ ^~~~~~~~~~~~~~
%hhd
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:367:46: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("Tuning for Band: %hd (%d kHz)\n", band, freq);
~~~ ^~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:445:39: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("REFDIV: %hd, FREF: %d\n", REFDIV, FREF);
~~~ ^~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:447:57: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("Num: %hd, Den: %hd, SD: %hd\n", (u16) Rest, Den, (state->lo4 >> 12) & 0x1);
~~~ ^~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:447:62: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
dprintk("Num: %hd, Den: %hd, SD: %hd\n", (u16) Rest, Den, (state->lo4 >> 12) & 0x1);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~
%d
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:448:33: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("HFDIV code: %hd\n", state->current_tune_table_index->hfdiv);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:449:27: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("VCO = %hd\n", state->current_tune_table_index->vco_band);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:450:40: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("VCOF: ((%hd*%d) << 1))\n", state->current_tune_table_index->vco_multi, freq);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Wed, 1 Jan 2020 08:59:58 +0000 (09:59 +0100)]
media: dib7000p: incorrect format specifier detected by clang
drivers/media/dvb-frontends/dib7000p.c:918:37: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("SPLIT %p: %hd\n", demod, agc_split);
~~~ ^~~~~~~~~
%hhu
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Wed, 1 Jan 2020 08:58:56 +0000 (09:58 +0100)]
media: dib7000m: incorrect format specifier detected by clang
drivers/media/dvb-frontends/dib7000m.c:811:38: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("SPLIT %p: %hd\n", demod, agc_split);
~~~ ^~~~~~~~~
%hhu
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Wed, 8 Jan 2020 10:13:25 +0000 (11:13 +0100)]
Merge tag 'v5.5-rc5' into patchwork
Linux 5.5-rc5
* tag 'v5.5-rc5': (1006 commits)
Linux 5.5-rc5
Documentation: riscv: add patch acceptance guidelines
riscv: prefix IRQ_ macro names with an RV_ namespace
clocksource: riscv: add notrace to riscv_sched_clock
apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
hexagon: define ioremap_uc
ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
mm/hugetlb: defer freeing of huge pages if in non-task context
mm/gup: fix memory leak in __gup_benchmark_ioctl
mm/oom: fix pgtables units mismatch in Killed process message
fs/posix_acl.c: fix kernel-doc warnings
hexagon: work around compiler crash
hexagon: parenthesize registers in asm predicates
fs/namespace.c: make to_mnt_ns() static
fs/nsfs.c: include headers for missing declarations
fs/direct-io.c: include fs/internal.h for missing prototype
mm: move_pages: return valid node id in status if the page is already on the target node
memcg: account security cred as well to kmemcg
kcov: fix struct layout for kcov_remote_arg
...
Linus Torvalds [Sun, 5 Jan 2020 22:23:27 +0000 (14:23 -0800)]
Linux 5.5-rc5
Linus Torvalds [Sun, 5 Jan 2020 19:15:31 +0000 (11:15 -0800)]
Merge tag 'riscv/for-v5.5-rc5' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Several fixes for RISC-V:
- Fix function graph trace support
- Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"
- Use __pa_symbol() when computing the physical address of a kernel
symbol, rather than __pa()
- Mark the RISC-V port as supporting GCOV
One DT addition:
- Describe the L2 cache controller in the FU540 DT file
One documentation update:
- Add patch acceptance guideline documentation"
* tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Documentation: riscv: add patch acceptance guidelines
riscv: prefix IRQ_ macro names with an RV_ namespace
clocksource: riscv: add notrace to riscv_sched_clock
riscv: ftrace: correct the condition logic in function graph tracer
riscv: dts: Add DT support for SiFive L2 cache controller
riscv: gcov: enable gcov for RISC-V
riscv: mm: use __pa_symbol for kernel symbols
Paul Walmsley [Sat, 23 Nov 2019 02:33:28 +0000 (18:33 -0800)]
Documentation: riscv: add patch acceptance guidelines
Formalize, in kernel documentation, the patch acceptance policy for
arch/riscv. In summary, it states that as maintainers, we plan to
only accept patches for new modules or extensions that have been
frozen or ratified by the RISC-V Foundation.
We've been following these guidelines for the past few months. In the
meantime, we've received quite a bit of feedback that it would be
helpful to have these guidelines formally documented.
Based on a suggestion from Matthew Wilcox, we also add a link to this
file to Documentation/process/index.rst, to make this document easier
to find. The format of this document has also been changed to align
to the format outlined in the maintainer entry profiles, in accordance
with comments from Jon Corbet and Dan Williams.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Krste Asanovic <krste@berkeley.edu>
Cc: Andrew Waterman <waterman@eecs.berkeley.edu>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Paul Walmsley [Fri, 20 Dec 2019 11:09:49 +0000 (03:09 -0800)]
riscv: prefix IRQ_ macro names with an RV_ namespace
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently
generic macro name that it's used by several source files across the
Linux code base. Some of these other files ultimately include the
arch/riscv CSR include file, causing collisions. Fix by prefixing the
RISC-V csr.h IRQ_ macro names with an RV_ prefix.
Fixes:
a4c3733d32a72 ("riscv: abstract out CSR names for supervisor vs machine mode")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Zong Li [Mon, 23 Dec 2019 08:46:14 +0000 (16:46 +0800)]
clocksource: riscv: add notrace to riscv_sched_clock
When enabling ftrace graph tracer, it gets the tracing clock in
ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock()
to get the clock value. If riscv_sched_clock() isn't marked with
'notrace', it will call ftrace_push_return_trace() and cause infinite
loop.
The result of failure as follow:
command: echo function_graph >current_tracer
[ 46.176787] Unable to handle kernel paging request at virtual address
ffffffe04fb38c48
[ 46.177309] Oops [#1]
[ 46.177478] Modules linked in:
[ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47
[ 46.177981] epc:
ffffffe00035e59a ra :
ffffffe00035e57e sp :
ffffffe03a7569b0
[ 46.178216] gp :
ffffffe000d29b90 tp :
ffffffe03a756180 t0 :
ffffffe03a756968
[ 46.178430] t1 :
ffffffe00087f408 t2 :
ffffffe03a7569a0 s0 :
ffffffe03a7569f0
[ 46.178643] s1 :
ffffffe00087f408 a0 :
0000000ac054cda4 a1 :
000000000087f411
[ 46.178856] a2 :
0000000ac054cda4 a3 :
0000000000373ca0 a4 :
ffffffe04fb38c48
[ 46.179099] a5 :
00000000153e22a8 a6 :
00000000005522ff a7 :
0000000000000005
[ 46.179338] s2 :
ffffffe03a756a90 s3 :
ffffffe00032811c s4 :
ffffffe03a756a58
[ 46.179570] s5 :
ffffffe000d29fe0 s6 :
0000000000000001 s7 :
0000000000000003
[ 46.179809] s8 :
0000000000000003 s9 :
0000000000000002 s10:
0000000000000004
[ 46.180053] s11:
0000000000000000 t3 :
0000003fc815749c t4 :
00000000000efc90
[ 46.180293] t5 :
ffffffe000d29658 t6 :
0000000000040000
[ 46.180482] status:
0000000000000100 badaddr:
ffffffe04fb38c48 cause:
000000000000000f
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[paul.walmsley@sifive.com: cleaned up patch description]
Fixes:
92e0d143fdef ("clocksource/drivers/riscv_timer: Provide the sched_clock")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Linus Torvalds [Sun, 5 Jan 2020 03:38:51 +0000 (19:38 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
hexagon: define ioremap_uc
ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
mm/hugetlb: defer freeing of huge pages if in non-task context
mm/gup: fix memory leak in __gup_benchmark_ioctl
mm/oom: fix pgtables units mismatch in Killed process message
fs/posix_acl.c: fix kernel-doc warnings
hexagon: work around compiler crash
hexagon: parenthesize registers in asm predicates
fs/namespace.c: make to_mnt_ns() static
fs/nsfs.c: include headers for missing declarations
fs/direct-io.c: include fs/internal.h for missing prototype
mm: move_pages: return valid node id in status if the page is already on the target node
memcg: account security cred as well to kmemcg
kcov: fix struct layout for kcov_remote_arg
mm/zsmalloc.c: fix the migrated zspage statistics.
mm/memory_hotplug: shrink zones when offlining memory
Linus Torvalds [Sun, 5 Jan 2020 03:28:30 +0000 (19:28 -0800)]
Merge tag 'apparmor-pr-2020-01-04' of git://git./linux/kernel/git/jj/linux-apparmor
Pull apparmor fixes from John Johansen:
- performance regression: only get a label reference if the fast path
check fails
- fix aa_xattrs_match() may sleep while holding a RCU lock
- fix bind mounts aborting with -ENOMEM
* tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
apparmor: only get a label reference if the fast path check fails
apparmor: fix bind mounts aborting with -ENOMEM
John Johansen [Thu, 2 Jan 2020 13:31:22 +0000 (05:31 -0800)]
apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
aa_xattrs_match() is unfortunately calling vfs_getxattr_alloc() from a
context protected by an rcu_read_lock. This can not be done as
vfs_getxattr_alloc() may sleep regardles of the gfp_t value being
passed to it.
Fix this by breaking the rcu_read_lock on the policy search when the
xattr match feature is requested and restarting the search if a policy
changes occur.
Fixes:
8e51f9087f40 ("apparmor: Add support for attaching profiles via xattr, presence and value")
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Linus Torvalds [Sat, 4 Jan 2020 22:16:57 +0000 (14:16 -0800)]
Merge tag 'mips_fixes_5.5_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A collection of MIPS fixes:
- Fill the struct cacheinfo shared_cpu_map field with sensible
values, notably avoiding issues with perf which was unhappy in the
absence of these values.
- A boot fix for Loongson 2E & 2F machines which was fallout from
some refactoring performed this cycle.
- A Kconfig dependency fix for the Loongson CPU HWMon driver.
- A couple of VDSO fixes, ensuring gettimeofday() behaves
appropriately for kernel configurations that don't include support
for a clocksource the VDSO can use & fixing the calling convention
for the n32 & n64 VDSOs which would previously clobber the $gp/$28
register.
- A build fix for vmlinuz compressed images which were
inappropriately building with -fsanitize-coverage despite not being
part of the kernel proper, then failing to link due to the missing
__sanitizer_cov_trace_pc() function.
- A couple of eBPF JIT fixes, including disabling it for MIPS32 due
to a large number of issues with the code generated there &
reflecting ISA dependencies in Kconfig to enforce that systems
which don't support the JIT must include the interpreter"
* tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Avoid VDSO ABI breakage due to global register variable
MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig
MIPS: BPF: Disable MIPS32 eBPF JIT
MIPS: Prevent link failure with kcov instrumentation
MIPS: Kconfig: Use correct form for 'depends on'
mips: Fix gettimeofday() in the vdso library
MIPS: Fix boot on Fuloong2 systems
mips: cacheinfo: report shared CPU map
Nick Desaulniers [Sat, 4 Jan 2020 21:00:26 +0000 (13:00 -0800)]
hexagon: define ioremap_uc
Similar to commit
38e45d81d14e ("sparc64: implement ioremap_uc") define
ioremap_uc for hexagon to avoid errors from
-Wimplicit-function-definition.
Link: http://lkml.kernel.org/r/20191209222956.239798-2-ndesaulniers@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/797
Fixes:
e537654b7039 ("lib: devres: add a helper function for ioremap_uc")
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Tuowen Zhao <ztuowen@gmail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Will Deacon <will@kernel.org>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gang He [Sat, 4 Jan 2020 21:00:22 +0000 (13:00 -0800)]
ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
Because ocfs2_get_dlm_debug() function is called once less here, ocfs2
file system will trigger the system crash, usually after ocfs2 file
system is unmounted.
This system crash is caused by a generic memory corruption, these crash
backtraces are not always the same, for exapmle,
ocfs2: Unmounting device (253,16) on (node
172167785)
general protection fault: 0000 [#1] SMP PTI
CPU: 3 PID: 14107 Comm: fence_legacy Kdump:
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:__kmalloc+0xa5/0x2a0
Code: 00 00 4d 8b 07 65 4d 8b
RSP: 0018:
ffffaa1fc094bbe8 EFLAGS:
00010286
RAX:
0000000000000000 RBX:
d310a8800d7a3faf RCX:
0000000000000000
RDX:
0000000000000000 RSI:
0000000000000dc0 RDI:
ffff96e68fc036c0
RBP:
d310a8800d7a3faf R08:
ffff96e6ffdb10a0 R09:
00000000752e7079
R10:
000000000001c513 R11:
0000000004091041 R12:
0000000000000dc0
R13:
0000000000000039 R14:
ffff96e68fc036c0 R15:
ffff96e68fc036c0
FS:
00007f699dfba540(0000) GS:
ffff96e6ffd80000(0000) knlGS:00000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000055f3a9d9b768 CR3:
000000002cd1c000 CR4:
00000000000006e0
Call Trace:
ext4_htree_store_dirent+0x35/0x100 [ext4]
htree_dirblock_to_tree+0xea/0x290 [ext4]
ext4_htree_fill_tree+0x1c1/0x2d0 [ext4]
ext4_readdir+0x67c/0x9d0 [ext4]
iterate_dir+0x8d/0x1a0
__x64_sys_getdents+0xab/0x130
do_syscall_64+0x60/0x1f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f699d33a9fb
This regression problem was introduced by commit
e581595ea29c ("ocfs: no
need to check return value of debugfs_create functions").
Link: http://lkml.kernel.org/r/20191225061501.13587-1-ghe@suse.com
Fixes:
e581595ea29c ("ocfs: no need to check return value of debugfs_create functions")
Signed-off-by: Gang He <ghe@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org> [5.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kai Li [Sat, 4 Jan 2020 21:00:18 +0000 (13:00 -0800)]
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
If journal is dirty when mount, it will be replayed but jbd2 sb log tail
cannot be updated to mark a new start because journal->j_flag has
already been set with JBD2_ABORT first in journal_init_common.
When a new transaction is committed, it will be recored in block 1
first(journal->j_tail is set to 1 in journal_reset). If emergency
restart happens again before journal super block is updated
unfortunately, the new recorded trans will not be replayed in the next
mount.
The following steps describe this procedure in detail.
1. mount and touch some files
2. these transactions are committed to journal area but not checkpointed
3. emergency restart
4. mount again and its journals are replayed
5. journal super block's first s_start is 1, but its s_seq is not updated
6. touch a new file and its trans is committed but not checkpointed
7. emergency restart again
8. mount and journal is dirty, but trans committed in 6 will not be
replayed.
This exception happens easily when this lun is used by only one node.
If it is used by multi-nodes, other node will replay its journal and its
journal super block will be updated after recovery like what this patch
does.
ocfs2_recover_node->ocfs2_replay_journal.
The following jbd2 journal can be generated by touching a new file after
journal is replayed, and seq 15 is the first valid commit, but first seq
is 13 in journal super block.
logdump:
Block 0: Journal Superblock
Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2)
Blocksize: 4096 Total Blocks: 32768 First Block: 1
First Commit ID: 13 Start Log Blknum: 1
Error: 0
Feature Compat: 0
Feature Incompat: 2 block64
Feature RO compat: 0
Journal UUID:
4ED3822C54294467A4F8E87D2BA4BC36
FS Share Cnt: 1 Dynamic Superblk Blknum: 0
Per Txn Block Limit Journal: 0 Data: 0
Block 1: Journal Commit Block
Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK)
Block 2: Journal Descriptor
Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK)
No. Blocknum Flags
0. 587 none
UUID:
00000000000000000000000000000000
1. 8257792 JBD2_FLAG_SAME_UUID
2. 619 JBD2_FLAG_SAME_UUID
3.
24772864 JBD2_FLAG_SAME_UUID
4. 8257802 JBD2_FLAG_SAME_UUID
5. 513 JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG
...
Block 7: Inode
Inode: 8257802 Mode: 0640 Generation:
57157641 (0x3682809)
FS Generation:
2839773110 (0xa9437fb6)
CRC32:
00000000 ECC: 0000
Type: Regular Attr: 0x0 Flags: Valid
Dynamic Features: (0x1) InlineData
User: 0 (root) Group: 0 (root) Size: 7
Links: 1 Clusters: 0
ctime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.
286280801 2019
atime: 0x5de5d870 0x113181a1 -- Tue Dec 3 11:37:20.
288457121 2019
mtime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.
286280801 2019
dtime: 0x0 -- Thu Jan 1 08:00:00 1970
...
Block 9: Journal Commit Block
Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK)
The following is journal recovery log when recovering the upper jbd2
journal when mount again.
syslog:
ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it.
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2
fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13
Due to first commit seq 13 recorded in journal super is not consistent
with the value recorded in block 1(seq is 14), journal recovery will be
terminated before seq 15 even though it is an unbroken commit, inode
8257802 is a new file and it will be lost.
Link: http://lkml.kernel.org/r/20191217020140.2197-1-li.kai4@h3c.com
Signed-off-by: Kai Li <li.kai4@h3c.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Changwei Ge <gechangwei@live.cn>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Sat, 4 Jan 2020 21:00:15 +0000 (13:00 -0800)]
mm/hugetlb: defer freeing of huge pages if in non-task context
The following lockdep splat was observed when a certain hugetlbfs test
was run:
================================
WARNING: inconsistent lock state
4.18.0-159.el8.x86_64+debug #1 Tainted: G W --------- - -
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/30/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffffffff9acdc038 (hugetlb_lock){+.?.}, at: free_huge_page+0x36f/0xaa0
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x14f/0x3b0
_raw_spin_lock+0x30/0x70
__nr_hugepages_store_common+0x11b/0xb30
hugetlb_sysctl_handler_common+0x209/0x2d0
proc_sys_call_handler+0x37f/0x450
vfs_write+0x157/0x460
ksys_write+0xb8/0x170
do_syscall_64+0xa5/0x4d0
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
irq event stamp: 691296
hardirqs last enabled at (691296): [<
ffffffff99bb034b>] _raw_spin_unlock_irqrestore+0x4b/0x60
hardirqs last disabled at (691295): [<
ffffffff99bb0ad2>] _raw_spin_lock_irqsave+0x22/0x81
softirqs last enabled at (691284): [<
ffffffff97ff0c63>] irq_enter+0xc3/0xe0
softirqs last disabled at (691285): [<
ffffffff97ff0ebe>] irq_exit+0x23e/0x2b0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(hugetlb_lock);
<Interrupt>
lock(hugetlb_lock);
*** DEADLOCK ***
:
Call Trace:
<IRQ>
__lock_acquire+0x146b/0x48c0
lock_acquire+0x14f/0x3b0
_raw_spin_lock+0x30/0x70
free_huge_page+0x36f/0xaa0
bio_check_pages_dirty+0x2fc/0x5c0
clone_endio+0x17f/0x670 [dm_mod]
blk_update_request+0x276/0xe50
scsi_end_request+0x7b/0x6a0
scsi_io_completion+0x1c6/0x1570
blk_done_softirq+0x22e/0x350
__do_softirq+0x23d/0xad8
irq_exit+0x23e/0x2b0
do_IRQ+0x11a/0x200
common_interrupt+0xf/0xf
</IRQ>
Both the hugetbl_lock and the subpool lock can be acquired in
free_huge_page(). One way to solve the problem is to make both locks
irq-safe. However, Mike Kravetz had learned that the hugetlb_lock is
held for a linear scan of ALL hugetlb pages during a cgroup reparentling
operation. So it is just too long to have irq disabled unless we can
break hugetbl_lock down into finer-grained locks with shorter lock hold
times.
Another alternative is to defer the freeing to a workqueue job. This
patch implements the deferred freeing by adding a free_hpage_workfn()
work function to do the actual freeing. The free_huge_page() call in a
non-task context saves the page to be freed in the hpage_freelist linked
list in a lockless manner using the llist APIs.
The generic workqueue is used to process the work, but a dedicated
workqueue can be used instead if it is desirable to have the huge page
freed ASAP.
Thanks to Kirill Tkhai <ktkhai@virtuozzo.com> for suggesting the use of
llist APIs which simplfy the code.
Link: http://lkml.kernel.org/r/20191217170331.30893-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Navid Emamdoost [Sat, 4 Jan 2020 21:00:12 +0000 (13:00 -0800)]
mm/gup: fix memory leak in __gup_benchmark_ioctl
In the implementation of __gup_benchmark_ioctl() the allocated pages
should be released before returning in case of an invalid cmd. Release
pages via kvfree().
[akpm@linux-foundation.org: rework code flow, return -EINVAL rather than -1]
Link: http://lkml.kernel.org/r/20191211174653.4102-1-navid.emamdoost@gmail.com
Fixes:
714a3a1ebafe ("mm/gup_benchmark.c: add additional pinning methods")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ilya Dryomov [Sat, 4 Jan 2020 21:00:09 +0000 (13:00 -0800)]
mm/oom: fix pgtables units mismatch in Killed process message
pr_err() expects kB, but mm_pgtables_bytes() returns the number of bytes.
As everything else is printed in kB, I chose to fix the value rather than
the string.
Before:
[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name
...
[ 1878] 1000 1878 217253 151144 1269760 0 0 python
...
Out of memory: Killed process 1878 (python) total-vm:869012kB, anon-rss:604572kB, file-rss:4kB, shmem-rss:0kB, UID:1000 pgtables:1269760kB oom_score_adj:0
After:
[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name
...
[ 1436] 1000 1436 217253 151890 1294336 0 0 python
...
Out of memory: Killed process 1436 (python) total-vm:869012kB, anon-rss:607516kB, file-rss:44kB, shmem-rss:0kB, UID:1000 pgtables:1264kB oom_score_adj:0
Link: http://lkml.kernel.org/r/20191211202830.1600-1-idryomov@gmail.com
Fixes:
70cb6d267790 ("mm/oom: add oom_score_adj and pgtables to Killed process message")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Edward Chron <echron@arista.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 4 Jan 2020 21:00:05 +0000 (13:00 -0800)]
fs/posix_acl.c: fix kernel-doc warnings
Fix kernel-doc warnings in fs/posix_acl.c.
Also fix one typo (setgit -> setgid).
fs/posix_acl.c:647: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
fs/posix_acl.c:647: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
fs/posix_acl.c:647: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
Link: http://lkml.kernel.org/r/29b0dc46-1f28-a4e5-b1d0-ba2b65629779@infradead.org
Fixes:
073931017b49d ("posix_acl: Clear SGID bit when setting file permissions")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Desaulniers [Sat, 4 Jan 2020 21:00:02 +0000 (13:00 -0800)]
hexagon: work around compiler crash
Clang cannot translate the string "r30" into a valid register yet.
Link: https://github.com/ClangBuiltLinux/linux/issues/755
Link: http://lkml.kernel.org/r/20191028155722.23419-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Sid Manning <sidneym@quicinc.com>
Reviewed-by: Brian Cain <bcain@codeaurora.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Desaulniers [Sat, 4 Jan 2020 20:59:59 +0000 (12:59 -0800)]
hexagon: parenthesize registers in asm predicates
Hexagon requires that register predicates in assembly be parenthesized.
Link: https://github.com/ClangBuiltLinux/linux/issues/754
Link: http://lkml.kernel.org/r/20191209222956.239798-3-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Sid Manning <sidneym@codeaurora.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Tuowen Zhao <ztuowen@gmail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Will Deacon <will@kernel.org>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Sat, 4 Jan 2020 20:59:55 +0000 (12:59 -0800)]
fs/namespace.c: make to_mnt_ns() static
Make to_mnt_ns() static to address the following 'sparse' warning:
fs/namespace.c:1731:22: warning: symbol 'to_mnt_ns' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191209234830.156260-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Sat, 4 Jan 2020 20:59:52 +0000 (12:59 -0800)]
fs/nsfs.c: include headers for missing declarations
Include linux/proc_fs.h and fs/internal.h to address the following
'sparse' warnings:
fs/nsfs.c:41:32: warning: symbol 'ns_dentry_operations' was not declared. Should it be static?
fs/nsfs.c:145:5: warning: symbol 'open_related_ns' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191209234822.156179-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Sat, 4 Jan 2020 20:59:49 +0000 (12:59 -0800)]
fs/direct-io.c: include fs/internal.h for missing prototype
Include fs/internal.h to address the following 'sparse' warning:
fs/direct-io.c:591:5: warning: symbol 'sb_init_dio_done_wq' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191209234544.128302-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Shi [Sat, 4 Jan 2020 20:59:46 +0000 (12:59 -0800)]
mm: move_pages: return valid node id in status if the page is already on the target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes:
a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Sat, 4 Jan 2020 20:59:43 +0000 (12:59 -0800)]
memcg: account security cred as well to kmemcg
The cred_jar kmem_cache is already memcg accounted in the current kernel
but cred->security is not. Account cred->security to kmemcg.
Recently we saw high root slab usage on our production and on further
inspection, we found a buggy application leaking processes. Though that
buggy application was contained within its memcg but we observe much
more system memory overhead, couple of GiBs, during that period. This
overhead can adversely impact the isolation on the system.
One source of high overhead we found was cred->security objects, which
have a lifetime of at least the life of the process which allocated
them.
Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Konovalov [Sat, 4 Jan 2020 20:59:39 +0000 (12:59 -0800)]
kcov: fix struct layout for kcov_remote_arg
Make the layout of kcov_remote_arg the same for 32-bit and 64-bit code.
This makes it more convenient to write userspace apps that can be
compiled into 32-bit or 64-bit binaries and still work with the same
64-bit kernel.
Also use proper __u32 types in uapi headers instead of unsigned ints.
Link: http://lkml.kernel.org/r/9e91020876029cfefc9211ff747685eba9536426.1575638983.git.andreyknvl@google.com
Fixes:
eec028c9386ed1a ("kcov: remote coverage support")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: "Jacky . Cao @ sony . com" <Jacky.Cao@sony.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chanho Min [Sat, 4 Jan 2020 20:59:36 +0000 (12:59 -0800)]
mm/zsmalloc.c: fix the migrated zspage statistics.
When zspage is migrated to the other zone, the zone page state should be
updated as well, otherwise the NR_ZSPAGE for each zone shows wrong
counts including proc/zoneinfo in practice.
Link: http://lkml.kernel.org/r/1575434841-48009-1-git-send-email-chanho.min@lge.com
Fixes:
91537fee0013 ("mm: add NR_ZSMALLOC to vmstat")
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jinsuk Choi <jjinsuk.choi@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Sat, 4 Jan 2020 20:59:33 +0000 (12:59 -0800)]
mm/memory_hotplug: shrink zones when offlining memory
We currently try to shrink a single zone when removing memory. We use
the zone of the first page of the memory we are removing. If that
memmap was never initialized (e.g., memory was never onlined), we will
read garbage and can trigger kernel BUGs (due to a stale pointer):
BUG: unable to handle page fault for address:
000000000000353d
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-
20190820+ #317
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:clear_zone_contiguous+0x5/0x10
Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840
RSP: 0018:
ffffad2400043c98 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
0000000200000000 RCX:
0000000000000000
RDX:
0000000000200000 RSI:
0000000000140000 RDI:
0000000000002f40
RBP:
0000000140000000 R08:
0000000000000000 R09:
0000000000000001
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000140000
R13:
0000000000140000 R14:
0000000000002f40 R15:
ffff9e3e7aff3680
FS:
0000000000000000(0000) GS:
ffff9e3e7bb00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000000000353d CR3:
0000000058610000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
__remove_pages+0x4b/0x640
arch_remove_memory+0x63/0x8d
try_remove_memory+0xdb/0x130
__remove_memory+0xa/0x11
acpi_memory_device_remove+0x70/0x100
acpi_bus_trim+0x55/0x90
acpi_device_hotplug+0x227/0x3a0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x221/0x550
worker_thread+0x50/0x3b0
kthread+0x105/0x140
ret_from_fork+0x3a/0x50
Modules linked in:
CR2:
000000000000353d
Instead, shrink the zones when offlining memory or when onlining failed.
Introduce and use remove_pfn_range_from_zone(() for that. We now
properly shrink the zones, even if we have DIMMs whereby
- Some memory blocks fall into no zone (never onlined)
- Some memory blocks fall into multiple zones (offlined+re-onlined)
- Multiple memory blocks that fall into different zones
Drop the zone parameter (with a potential dubious value) from
__remove_pages() and __remove_section().
Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com
Fixes:
f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after
d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 4 Jan 2020 18:49:15 +0000 (10:49 -0800)]
Merge tag 'dmaengine-fix-5.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A bunch of fixes for:
- uninitialized dma_slave_caps access
- virt-dma use after free in vchan_complete()
- driver fixes for ioat, k3dma and jz4780"
* tag 'dmaengine-fix-5.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
ioat: ioat_alloc_ring() failure handling.
dmaengine: virt-dma: Fix access after free in vchan_complete()
dmaengine: k3dma: Avoid null pointer traversal
dmaengine: dma-jz4780: Also break descriptor chains on JZ4725B
dmaengine: Fix access to uninitialized dma_slave_caps
Linus Torvalds [Sat, 4 Jan 2020 18:41:08 +0000 (10:41 -0800)]
Merge tag 'media/v5.5-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes at CEC core to comply with HDMI 2.0 specs and fix some
border cases
- a fix at the transmission logic of the pulse8-cec driver
- one alignment fix on a data struct at ipu3 when built with 32 bits
* tag 'media/v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes
media: pulse8-cec: fix lost cec_transmit_attempt_done() call
media: cec: check 'transmit_in_progress', not 'transmitting'
media: cec: avoid decrementing transmit_queue_sz if it is 0
media: cec: CEC 2.0-only bcast messages were ignored
Chen-Yu Tsai [Fri, 3 Jan 2020 06:45:33 +0000 (07:45 +0100)]
media: sun4i-csi: Add support for A10 CSI1 camera sensor interface
The A10/A20 Allwinner SoCs have two camera sensor interface blocks,
named CSI0 and CSI1. The two have the same register layouts with
slightly different features:
- CSI0 has an image signal processor (ISP); CSI1 doesn't
- CSI0 can support up to four separate channels under CCIR656;
CSI1 can only support one
- CSI0 can support up to 16-bit wide bus with YUV422;
CSI1 can support up to 24-bit wide bus with YUV444
For now the driver doesn't support wide busses, nor CCIR656. So the
only relevant difference is whether a clock needs to be taken and
enabled for the ISP.
Add structs to record the differences, tie them to the compatible
strings, and deal with the ISP clock. Support for the new CSI1
hardware block is added as well.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chen-Yu Tsai [Sun, 15 Dec 2019 16:59:15 +0000 (17:59 +0100)]
media: sun4i-csi: Deal with DRAM offset
On Allwinner SoCs, some high memory bandwidth devices do DMA directly
over the memory bus (called MBUS), instead of the system bus. These
devices include the CSI camera sensor interface, video (codec) engine,
display subsystem, etc.. The memory bus has a different addressing
scheme without the DRAM starting offset.
Deal with this using the "interconnects" property from the device tree,
or if that is not available, set dev->dma_pfn_offset to PHYS_PFN_OFFSET.
Fixes:
577bbf23b758 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chen-Yu Tsai [Sun, 15 Dec 2019 16:59:14 +0000 (17:59 +0100)]
media: sun4i-csi: Fix [HV]sync polarity handling
The Allwinner camera sensor interface has a different definition of
[HV]sync. While the timing diagram uses the names HSYNC and VSYNC,
the note following the diagram and register names use HREF and VREF.
Combined they imply the hardware uses either [HV]REF or inverted
[HV]SYNC. There are also registers to set horizontal skip lengths
in pixels and vertical skip lengths in lines, also known as back
porches.
Fix the polarity handling by using the opposite polarity flag for
the checks. Also rename `[hv]sync_pol` to `[hv]ref_pol` to better
match the hardware register description.
Fixes:
577bbf23b758 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chen-Yu Tsai [Sun, 15 Dec 2019 16:59:13 +0000 (17:59 +0100)]
media: sun4i-csi: Fix data sampling polarity handling
The CLK_POL field specifies whether data is sampled on the falling or
rising edge of PCLK, not whether the data lines are active high or low.
Evidence of this can be found in the timing diagram labeled "horizontal
size setting and pixel clock timing".
Fix the setting by checking the correct flag, V4L2_MBUS_PCLK_SAMPLE_RISING.
While at it, reorder the three polarity flag checks so HSYNC and VSYNC
are grouped together.
Fixes:
577bbf23b758 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chen-Yu Tsai [Sun, 15 Dec 2019 16:59:12 +0000 (17:59 +0100)]
media: dt-bindings: media: sun4i-csi: Add compatible for CSI0 on R40
The CSI0 block in the Allwinner R40 SoC looks to be the same as the one
in the A20. The register maps line up, and they support the same
features. The R40 appears to support BT.1120 based on the feature
overview, but it is not mentioned anywhere else. Also like the A20, the
ISP is not mentioned, but the CSI special clock needs to be enabled for
the hardware to function. The manual does state that the CSI special
clock is the TOP clock for all CSI hardware, but currently no hardware
exists for us to test if CSI1 also depends on it or not.
Add a compatible string for the CSI0 block in the R40, with the A20
compatible string as a fallback.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chen-Yu Tsai [Sun, 15 Dec 2019 16:59:11 +0000 (17:59 +0100)]
media: dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20
The CSI1 block has the same structure and layout as the CSI0 block.
Differences include:
- Only one channel in BT.656 instead of four in CSI0
- 10-bit raw data input vs 8-bit in CSI0
- 24-bit RGB888/YUV444 input vs 16-bit RGB565/YUV422 in CSI0
- No ISP hardware
The hardware found in the A20 is the same as in the A10.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Mon, 30 Dec 2019 09:26:25 +0000 (10:26 +0100)]
media: staging/intel-ipu3: make imgu use fixed running mode
Currently, the imgu running mode need user to set by v4l2 ctrl.
However, imgu only support 2 pipes and 2 operation modes - video and
still. This patch make the first imgu subdev running as video and second
one running as still, it will make the user understand easily, it can
also cover current camera use cases requirement. The running mode is set
during subdev registering, no race-condition after change, so it is safe
to change the mode data type to integer.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Mon, 30 Dec 2019 03:09:04 +0000 (04:09 +0100)]
media: staging/intel-ipu3: set the main output as mandatory
From firmware perspective, the main output for each pipe is mandatory
and must be enabled. This patch set the link between imgu subdev and
main output as IMMUTABLE by default.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eugen Hristev [Thu, 21 Nov 2019 07:55:24 +0000 (08:55 +0100)]
media: i2c: mt9v032: fix enum mbus codes and frame sizes
This driver supports both the mt9v032 (color) and the mt9v022 (mono)
sensors. Depending on which sensor is used, the format from the sensor is
different. The format.code inside the dev struct holds this information.
The enum mbus and enum frame sizes need to take into account both type of
sensors, not just the color one. To solve this, use the format.code in
these functions instead of the hardcoded bayer color format (which is only
used for mt9v032).
[Sakari Ailus: rewrapped commit message]
Suggested-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jules Irenge [Thu, 7 Nov 2019 10:36:08 +0000 (11:36 +0100)]
media: staging: ipu3: replace 0 with false
Replace 0 with false to clear
warning of assignment of 0/1 to bool variable.
Issue detected by coccinelle tool.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Adam Ford [Tue, 29 Oct 2019 12:42:11 +0000 (13:42 +0100)]
media: ov5640: Fix check for PLL1 exceeding max allowed rate
The variable _rate is by ov5640_compute_sys_clk() which returns
zero if the PLL exceeds 1GHz. Unfortunately, the check to see
if the max PLL1 output is checking 'rate' and not '_rate' and
'rate' does not ever appear to be 0.
This patch changes the check against the returned value of
'_rate' to determine if the PLL1 output exceeds 1GHz.
Fixes:
aa2882481cad ("media: ov5640: Adjust the clock based on the expected rate")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Adam Ford [Fri, 25 Oct 2019 19:07:23 +0000 (21:07 +0200)]
media: ov5640: Put max framerate into table and simplify check
Currently the various modes are placed into a table, but when
ov5640_find_mode is called, it has to double check whether
or not the requested framerate is tolerated by the mode.
The determination is based on checking hact, vact, and frame rate.
Only 640x480 is allowed at 60fps and QSXGA is limited to 15fps, but
as the number of permitted frame rates change, this will begin to
add more and more complexity to the check.
This patch simplifies the check by adding the max framerate
allowed for each mode into the table of modes. It then compares
the requested framerate to the max permitted in the mode's table.
This reduces the number of comparisions to one down from three
at run-time.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Linus Torvalds [Fri, 3 Jan 2020 20:20:21 +0000 (12:20 -0800)]
Merge tag 'for-5.5-rc4-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few fixes for btrfs:
- blkcg accounting problem with compression that could stall writes
- setting up blkcg bio for compression crashes due to NULL bdev
pointer
- fix possible infinite loop in writeback for nocow files (here
possible means almost impossible, 13 things that need to happen to
trigger it)"
* tag 'for-5.5-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix infinite loop during nocow writeback due to race
btrfs: fix compressed write bio blkcg attribution
btrfs: punt all bios created in btrfs_submit_compressed_write()
Linus Torvalds [Fri, 3 Jan 2020 20:11:30 +0000 (12:11 -0800)]
Merge tag 'block-5.5-
20200103' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three fixes in here:
- Fix for a missing split on default memory boundary mask (4G) (Ming)
- Fix for multi-page read bio truncate (Ming)
- Fix for null_blk zone close request handling (Damien)"
* tag 'block-5.5-
20200103' of git://git.kernel.dk/linux-block:
null_blk: Fix REQ_OP_ZONE_CLOSE handling
block: fix splitting segments on boundary masks
block: add bio_truncate to fix guard_bio_eod
Linus Torvalds [Fri, 3 Jan 2020 19:21:25 +0000 (11:21 -0800)]
Merge tag 'kbuild-fixes-v5.5-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix build error in usr/gen_initramfs_list.sh
- fix libelf-dev dependency in deb-pkg build
* tag 'kbuild-fixes-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild/deb-pkg: annotate libelf-dev dependency as :native
gen_initramfs_list.sh: fix 'bad variable name' error
Linus Torvalds [Fri, 3 Jan 2020 19:17:14 +0000 (11:17 -0800)]
Merge tag 'for-linus-2020-01-03' of git://git./linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"Here are two fixes:
- Panic earlier when global init exits to generate useable coredumps.
Currently, when global init and all threads in its thread-group
have exited we panic via:
do_exit()
-> exit_notify()
-> forget_original_parent()
-> find_child_reaper()
This makes it hard to extract a useable coredump for global init
from a kernel crashdump because by the time we panic exit_mm() will
have already released global init's mm. We now panic slightly
earlier. This has been a problem in certain environments such as
Android.
- Fix a race in assigning and reading taskstats for thread-groups
with more than one thread.
This patch has been waiting for quite a while since people
disagreed on what the correct fix was at first"
* tag 'for-linus-2020-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
exit: panic before exit_mm() on global init exit
taskstats: fix data-race
Linus Torvalds [Fri, 3 Jan 2020 19:13:50 +0000 (11:13 -0800)]
Merge tag 'powerpc-5.5-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two more powerpc fixes for 5.5:
- One commit to fix a build error when CONFIG_JUMP_LABEL=n,
introduced by our recent fix to is_shared_processor().
- A commit marking some SLB related functions as notrace, as tracing
them triggers warnings.
Thanks to Jason A Donenfeld"
* tag 'powerpc-5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/spinlocks: Include correct header for static key
powerpc/mm: Mark get_slice_psize() & slice_addr_is_low() as notrace
Linus Torvalds [Fri, 3 Jan 2020 19:10:31 +0000 (11:10 -0800)]
Merge tag 'sound-5.5-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing to worry at this stage but all nice small changes:
- A regression fix for AMD GPU detection in HD-audio
- A long-standing sleep-in-atomic fix for an ice1724 device
- Usual suspects, the device-specific quirks for HD- and USB-audio"
* tag 'sound-5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Enable the bass speaker of ASUS UX431FLC
ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code
ALSA: hda/realtek - Add Bass Speaker and fixed dac for bass speaker
ALSA: hda - Apply sync-write workaround to old Intel platforms, too
ALSA: hda/hdmi - fix atpx_present when CLASS is not VGA
ALSA: usb-audio: fix set_format altsetting sanity check
ALSA: hda/realtek - Add headset Mic no shutup for ALC283
ALSA: usb-audio: set the interface format after resume on Dell WD19
Linus Torvalds [Fri, 3 Jan 2020 19:08:30 +0000 (11:08 -0800)]
Merge tag 'drm-fixes-2020-01-03' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"New Years fixes! Mostly amdgpu with a light smattering of arm
graphics, and two AGP warning fixes.
Quiet as expected, hopefully we don't get a post holiday rush.
agp:
- two unused variable removed
amdgpu:
- ATPX regression fix
- SMU metrics table locking fixes
- gfxoff fix for raven
- RLC firmware loading stability fix
mediatek:
- external display fix
- dsi timing fix
sun4i:
- Fix double-free in connector/encoder cleanup (Stefan)
maildp:
- Make vtable static (Ben)"
* tag 'drm-fixes-2020-01-03' of git://anongit.freedesktop.org/drm/drm:
agp: remove unused variable arqsz in agp_3_5_enable()
agp: remove unused variable mcapndx
drm/amdgpu: correct RLC firmwares loading sequence
drm/amdgpu: enable gfxoff for raven1 refresh
drm/amdgpu/smu: add metrics table lock for vega20 (v2)
drm/amdgpu/smu: add metrics table lock for navi (v2)
drm/amdgpu/smu: add metrics table lock for arcturus (v2)
drm/amdgpu/smu: add metrics table lock
Revert "drm/amdgpu: simplify ATPX detection"
drm/arm/mali: make malidp_mw_connector_helper_funcs static
drm/sun4i: hdmi: Remove duplicate cleanup calls
drm/mediatek: reduce the hbp and hfp for phy timing
drm/mediatek: Fix can't get component for external display plane.
drm/mediatek: Check return value of mtk_drm_ddp_comp_for_plane.
Jan Stancek [Fri, 3 Jan 2020 17:37:18 +0000 (18:37 +0100)]
mm/hugetlbfs: fix for_each_hstate() loop in init_hugetlbfs_fs()
LTP memfd_create04 started failing for some huge page sizes
after v5.4-10135-gc3bfc5dd73c6.
The problem is the check introduced to for_each_hstate() loop that
should skip default_hstate_idx. Since it doesn't update 'i' counter,
all subsequent huge page sizes are skipped as well.
Fixes:
8fc312b32b25 ("mm/hugetlbfs: fix error handling when setting up mounts")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sakari Ailus [Fri, 11 Oct 2019 09:45:22 +0000 (11:45 +0200)]
media: smiapp: Put the device again if starting streaming fails
If there was an error in starting streaming, put the runtime usage count
of the device.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Mon, 30 Sep 2019 08:18:45 +0000 (10:18 +0200)]
media: smiapp: Avoid maintaining power state information
Instead of keeping track of the power state ourselves, let runtime PM
handle it.
This also splits handling controls between side effect management and
writing the new configuration to the sensor's registers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Fri, 18 Oct 2019 14:50:05 +0000 (16:50 +0200)]
media: omap3isp: Don't restart CCDC if we're about to stop
The omap3isp driver set the new buffer and enabled the CCDC in a situation
a new buffer was available but streaming was about to be stopped on the
CCDC. This lead to frequent system crashes in case there were buffers
queued when streming was being stopped.
Fix this by first checking whether there's an intent to stop streaming and
if there isn't, then set the new buffer and re-enable CCDC.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Thu, 17 Oct 2019 11:01:37 +0000 (13:01 +0200)]
media: omap3isp: Ignore failure of stopping streaming on external subdev
The isp was marked to have failed to stop if stopping streaming on an
external subdev failed. The return value from the external subdev should
be ignored instead as it is not part of the ISP and thus the ISP does not
need to be reset for that reason.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomasz Maciej Nowak [Sun, 29 Dec 2019 14:53:55 +0000 (15:53 +0100)]
media: dvb: add support for TerraTec TC2 Stick (193534)
Seems to be a clone of Logilink VG0022A. Supports DVB-C, DVB-T and
DVB-T2. Only terrestrial reception was tested on Polish and Czech
multiplexes.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bodo Eggert [Thu, 26 Dec 2019 21:28:45 +0000 (22:28 +0100)]
media: serial_ir: change "ignoring spike" to debug level
At least on my system with a self-made IR receiver, my kernel log is filled
with:
serial_ir serial_ir.0: ignoring spike: 1 1 1419988034627194ns 1419956080709377ns
These messages happen at random and do not prevent the receiver from
working. Also I cannot change the features of the IC, therefore they are not
useful. Probably they are not useful at all.
However they fill the console, they accumulate and fill the dmesg log, by
doing this, they prevent me from seeing important message.
Signed-off-by: Bodo Eggert <7eggert@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
James Hogan [Thu, 19 Dec 2019 14:52:57 +0000 (15:52 +0100)]
media: MAINTAINERS: Orphan img-ir driver
I haven't been active for 18 months, and don't have the hardware set up
to test the img-ir driver, so mark it as orphaned and remove myself as
maintainer.
I used to test this driver using a Minimorph board with Meta based
TZ1090 SoC, but the Meta arch port is long gone from the kernel. The
only remaining platform in-tree using this driver is the Imagination
Pistachio SoC, and the only Pistachio based board with DTS in-tree (MIPS
Creator Ci40) doesn't bring the IR out.
However I presume the IP persists under the guardianship of Sondrel, and
its possible current & future SoCs/boards may continue to use this IP.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: James Hartley <james.hartley@sondrel.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
David J. Fiddes [Tue, 12 Nov 2019 12:40:59 +0000 (13:40 +0100)]
media: rtl28xxu: Add support for PROlectrix DV107669 DVB-T dongle
This adds support for the PROlectrix DV107669 DVT-T dongle which
uses an RTL2832 and FC0012 tuner.
Tests:
- Verified correct operation of DVB-T reception with VLC across
several UK multiplexes
Signed-off-by: David J. Fiddes <D.J@fiddes.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel W. S. Almeida [Sun, 1 Dec 2019 16:15:41 +0000 (17:15 +0100)]
media: dvb_dummy_fe: Add blank line after declaration
Fix checkpatch.pl error by adding a blank line
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel W. S. Almeida [Thu, 7 Nov 2019 01:36:33 +0000 (02:36 +0100)]
media: dvb_dummy_fe: place EXPORT_SYMBOL below corresponding function
dvb_dummy_fe.c had all its EXPORT_SYMBOL macros located at the end of the
file. Now these are located directly below the symbol they are exporting
for increased readability.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Thu, 21 Nov 2019 10:10:47 +0000 (11:10 +0100)]
media: rc: ensure lirc is initialized before registering input device
Once rc_open is called on the input device, lirc events can be delivered.
Ensure lirc is ready to do so else we might get this:
Registered IR keymap rc-hauppauge
rc rc0: Hauppauge WinTV PVR-350 as
/devices/pci0000:00/0000:00:1e.0/0000:04:00.0/i2c-0/0-0018/rc/rc0
input: Hauppauge WinTV PVR-350 as
/devices/pci0000:00/0000:00:1e.0/0000:04:00.0/i2c-0/0-0018/rc/rc0/input9
BUG: kernel NULL pointer dereference, address:
0000000000000038
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.3.11-300.fc31.x86_64 #1
Hardware name: /DG43NB, BIOS NBG4310H.86A.0096.2009.0903.1845 09/03/2009
Workqueue: events ir_work [ir_kbd_i2c]
RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0
Code: a6 b4 07 00 00 49 81 c6 b8 07 00 00 55 53 e8 ba a7 9d ff 4c 89
e7 49 89 45 00 e8 5e 7a 25 00 49 8b 1e 48 89 c5 4c 39 f3 74 58 <8b> 43
38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49
RSP: 0018:
ffffaae2000b3d88 EFLAGS:
00010017
RAX:
0000000000000002 RBX:
0000000000000000 RCX:
0000000000000019
RDX:
0000000000000001 RSI:
006e801b1f26ce6a RDI:
ffff9e39797c37b4
RBP:
0000000000000002 R08:
0000000000000001 R09:
0000000000000001
R10:
0000000000000001 R11:
0000000000000001 R12:
ffff9e39797c37b4
R13:
ffffaae2000b3db8 R14:
ffff9e39797c37b8 R15:
ffff9e39797c33d8
FS:
0000000000000000(0000) GS:
ffff9e397b680000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000038 CR3:
0000000035844000 CR4:
00000000000006e0
Call Trace:
ir_do_keydown+0x8e/0x2b0
rc_keydown+0x52/0xc0
ir_work+0xb8/0x130 [ir_kbd_i2c]
process_one_work+0x19d/0x340
worker_thread+0x50/0x3b0
kthread+0xfb/0x130
? process_one_work+0x340/0x340
? kthread_park+0x80/0x80
ret_from_fork+0x35/0x40
Modules linked in: rc_hauppauge tuner msp3400 saa7127 saa7115 ivtv(+)
tveeprom cx2341x v4l2_common videodev mc i2c_algo_bit ir_kbd_i2c
ip_tables firewire_ohci e1000e serio_raw firewire_core ata_generic
crc_itu_t pata_acpi pata_jmicron fuse
CR2:
0000000000000038
---[ end trace
c67c2697a99fa74b ]---
RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0
Code: a6 b4 07 00 00 49 81 c6 b8 07 00 00 55 53 e8 ba a7 9d ff 4c 89
e7 49 89 45 00 e8 5e 7a 25 00 49 8b 1e 48 89 c5 4c 39 f3 74 58 <8b> 43
38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49
RSP: 0018:
ffffaae2000b3d88 EFLAGS:
00010017
RAX:
0000000000000002 RBX:
0000000000000000 RCX:
0000000000000019
RDX:
0000000000000001 RSI:
006e801b1f26ce6a RDI:
ffff9e39797c37b4
RBP:
0000000000000002 R08:
0000000000000001 R09:
0000000000000001
R10:
0000000000000001 R11:
0000000000000001 R12:
ffff9e39797c37b4
R13:
ffffaae2000b3db8 R14:
ffff9e39797c37b8 R15:
ffff9e39797c33d8
FS:
0000000000000000(0000) GS:
ffff9e397b680000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000038 CR3:
0000000035844000 CR4:
00000000000006e0
rc rc0: lirc_dev: driver ir_kbd_i2c registered at minor = 0, scancode
receiver, no transmitter
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and
compatibles))
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPG (1024 kB)
ivtv0: Registered device vbi8 for decoder VBI (64 kB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1024 kB)
Cc: stable@vger.kernel.org
Tested-by: Nick French <nickfrench@gmail.com>
Reported-by: Nick French <nickfrench@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Mon, 11 Nov 2019 11:40:52 +0000 (12:40 +0100)]
media: cxusb: use dev_dbg() rather than hand-rolled debug
This solves the following compiler warnings:
drivers/media/usb/dvb-usb/cxusb.c: In function ‘cxusb_gpio_tuner’:
drivers/media/usb/dvb-usb/cxusb.c:128:35: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
128 | deb_info("gpio_write failed.\n");
| ^
drivers/media/usb/dvb-usb/cxusb.c: In function ‘cxusb_bluebird_gpio_rw’:
drivers/media/usb/dvb-usb/cxusb.c:145:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
145 | deb_info("bluebird_gpio_write failed.\n");
| ^
drivers/media/usb/dvb-usb/cxusb.c: In function ‘cxusb_i2c_xfer’:
drivers/media/usb/dvb-usb/cxusb.c:251:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
251 | deb_i2c("i2c read may have failed\n");
| ^
drivers/media/usb/dvb-usb/cxusb.c:274:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
274 | deb_i2c("i2c write may have failed\n");
| ^
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sun, 10 Nov 2019 10:25:13 +0000 (11:25 +0100)]
media: vp7045: do not read uninitialized values if usb transfer fails
It is not a fatal error if reading the mac address or the remote control
decoder state fails.
Reported-by: syzbot+ec869945d3dde5f33b43@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sun, 10 Nov 2019 10:15:37 +0000 (11:15 +0100)]
media: af9005: uninitialized variable printked
If usb_bulk_msg() fails, actual_length can be uninitialized.
Reported-by: syzbot+9d42b7773d2fecd983ab@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ard Biesheuvel [Mon, 30 Dec 2019 14:07:47 +0000 (15:07 +0100)]
kbuild/deb-pkg: annotate libelf-dev dependency as :native
Cross compiling the x86 kernel on a non-x86 build machine produces
the following error when CONFIG_UNWINDER_ORC is enabled, regardless
of whether libelf-dev is installed or not.
dpkg-checkbuilddeps: error: Unmet build dependencies: libelf-dev
dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting
dpkg-buildpackage: warning: (Use -d flag to override.)
Since this is a build time dependency for a build tool, we need to
depend on the native version of libelf-dev so add the appropriate
annotation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 30 Dec 2019 13:20:06 +0000 (22:20 +0900)]
gen_initramfs_list.sh: fix 'bad variable name' error
Prior to commit
858805b336be ("kbuild: add $(BASH) to run scripts with
bash-extension"), this shell script was almost always run by bash since
bash is usually installed on the system by default.
Now, this script is run by sh, which might be a symlink to dash. On such
distributions, the following code emits an error:
local dev=`LC_ALL=C ls -l "${location}"`
You can reproduce the build error, for example by setting
CONFIG_INITRAMFS_SOURCE="/dev".
GEN usr/initramfs_data.cpio.gz
./usr/gen_initramfs_list.sh: 131: local: 1: bad variable name
make[1]: *** [usr/Makefile:61: usr/initramfs_data.cpio.gz] Error 2
This is because `LC_ALL=C ls -l "${location}"` contains spaces.
Surrounding it with double-quotes fixes the error.
Fixes:
858805b336be ("kbuild: add $(BASH) to run scripts with bash-extension")
Reported-by: Jory A. Pratt <anarchy@gentoo.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Sean Young [Sun, 10 Nov 2019 10:04:40 +0000 (11:04 +0100)]
media: digitv: don't continue if remote control state can't be read
This results in an uninitialized variable read.
Reported-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Mon, 16 Dec 2019 14:15:06 +0000 (15:15 +0100)]
media: v4l2-core: fix compat v4l2_buffer handling for time64 ABI
Add support for the four new variants of ioctl commands for 64-bit time_t
in v4l2_buffer.
The existing v4l2_buffer32 structure for the traditional format gets
changed to match the new v4l2_buffer format, and the old layout is
now called v4l2_buffer32_time32. Neither of these matches the native
64-bit architecture format of v4l2_buffer, so both require special
handling in compat code.
Duplicating the existing handlers for the new types is a safe conversion
for now, but unfortunately this may turn into a maintenance burden
later. A larger-scale rework of the compat code might be a better
alternative, but is out of scope of the y2038 work.
Note: x32 support for v4l2_buffer32 has always been broken and remains
so after this change, fixing it would have required even more duplication,
and apparently nobody has cared so far.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: remove spurious newline]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Mon, 16 Dec 2019 14:15:05 +0000 (15:15 +0100)]
media: v4l2-core: fix compat VIDIOC_DQEVENT for time64 ABI
The native code supports the variant of struct v4l2_event for 64-bit
time_t, so add the compat version as well.
Here, a new incompatibility arises: while almost all 32-bit architectures
now use the same layout as 64-bit architectures and the commands can
simply be passed through, on x86 the internal alignment of v4l2_event
is different because of the 64-bit member in v4l2_event_ctrl.
To handle all architectures, this now requires defining four different
versions of the structure to cover all possible combinations. The compat
handling for VIDIOC_DQEVENT32 and VIDIOC_DQEVENT32_TIME32 is now inside
of an #ifdef so it does not get used on architectures other than x86.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Mon, 16 Dec 2019 14:15:04 +0000 (15:15 +0100)]
media: v4l2-core: fix v4l2_buffer handling for time64 ABI
The v4l2_buffer structure contains a 'struct timeval' member that is
defined by the user space C library, creating an ABI incompatibility
when that gets updated to a 64-bit time_t.
As in v4l2_event, handle this with a special case in video_put_user()
and video_get_user() to replace the memcpy there.
Since the structure also contains a pointer, there are now two
native versions (on 32-bit systems) as well as two compat versions
(on 64-bit systems), which unfortunately complicates the compat
handler quite a bit.
Duplicating the existing handlers for the new types is a safe
conversion for now, but unfortunately this may turn into a
maintenance burden later. A larger-scale rework of the
compat code might be a better alternative, but is out of scope
of the y2038 work.
Sparc64 needs a special case because of their special suseconds_t
definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Mon, 16 Dec 2019 14:15:03 +0000 (15:15 +0100)]
media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABI
The v4l2_event structure contains a 'struct timespec' member that is
defined by the user space C library, creating an ABI incompatibility
when that gets updated to a 64-bit time_t.
While passing a 32-bit time_t here would be sufficient for CLOCK_MONOTONIC
timestamps, simply redefining the structure to use the kernel's
__kernel_old_timespec would not work for any library that uses a copy
of the linux/videodev2.h header file rather than including the copy from
the latest kernel headers.
This means the kernel has to be changed to handle both versions of the
structure layout on a 32-bit architecture. The easiest way to do this
is during the copy from/to user space.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Mon, 16 Dec 2019 14:15:02 +0000 (15:15 +0100)]
media: v4l2-core: split out data copy from video_usercopy
The copy-in/out portions of video_usercopy() are about to
get more complex, so turn then into separate functions as
a cleanup first.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Mon, 16 Dec 2019 14:15:01 +0000 (15:15 +0100)]
media: v4l2-core: compat: ignore native command codes
The do_video_ioctl() compat handler converts the compat command
codes into the native ones before processing further, but this
causes problems for 32-bit user applications that pass a command
code that matches a 64-bit native number, which will then be
handled the same way.
Specifically, this breaks VIDIOC_DQEVENT_TIME from user space
applications with 64-bit time_t, as the structure layout is
the same as the native 64-bit layout on many architectures
(x86 being the notable exception).
Change the handler to use the converted command code only for
passing into the native ioctl handler, not for deciding on the
conversion, in order to make the compat behavior match the
native behavior.
Actual support for the 64-bit time_t version of VIDIOC_DQEVENT_TIME
and other commands still needs to be added in a separate patch.
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Mon, 16 Dec 2019 14:15:00 +0000 (15:15 +0100)]
media: v4l2: abstract timeval handling in v4l2_buffer
As a preparation for adding 64-bit time_t support in the uapi,
change the drivers to no longer care about the format of the
timestamp field in struct v4l2_buffer.
The v4l2_timeval_to_ns() function is no longer needed in the
kernel after this, but there is userspace code relying on
it to be part of the uapi header.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: replace spaces by tabs]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Mon, 16 Dec 2019 14:14:59 +0000 (15:14 +0100)]
media: documentation: fix video_event description
The type for the timestamp in video_event was changed to
'long' a long time ago, change the documentation to match.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Wed, 6 Nov 2019 11:57:07 +0000 (12:57 +0100)]
media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes
A struct that needs to be aligned to 32 bytes has a size of 28. Increase
the size to 32.
This makes elements of arrays of this struct aligned to 32 as well, and
other structs where members are aligned to 32 mixing
ipu3_uapi_awb_fr_config_s as well as other types.
Fixes: commit
dca5ef2aa1e6 ("media: staging/intel-ipu3: remove the unnecessary compiler flags")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Zong Li [Mon, 23 Dec 2019 08:46:13 +0000 (16:46 +0800)]
riscv: ftrace: correct the condition logic in function graph tracer
The condition should be logical NOT to assign the hook address to parent
address. Because the return value 0 of function_graph_enter upon
success.
Fixes:
e949b6db51dc (riscv/function_graph: Simplify with function_graph_enter())
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Yash Shah [Fri, 3 Jan 2020 04:13:20 +0000 (09:43 +0530)]
riscv: dts: Add DT support for SiFive L2 cache controller
Add the L2 cache controller DT node in SiFive FU540 soc-specific DT file
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Zong Li [Thu, 2 Jan 2020 03:09:54 +0000 (11:09 +0800)]
riscv: gcov: enable gcov for RISC-V
This patch enables GCOV code coverage measurement on RISC-V.
Lightly tested on QEMU and Hifive Unleashed board, seems to work as
expected.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Zong Li [Thu, 2 Jan 2020 03:12:40 +0000 (11:12 +0800)]
riscv: mm: use __pa_symbol for kernel symbols
__pa_symbol is the marcro that should be used for kernel symbols. It is
also a pre-requisite for DEBUG_VIRTUAL which will do bounds checking.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Yunfeng Ye [Tue, 17 Dec 2019 12:22:57 +0000 (20:22 +0800)]
agp: remove unused variable arqsz in agp_3_5_enable()
This patch fix the following warning:
drivers/char/agp/isoch.c: In function ‘agp_3_5_enable’:
drivers/char/agp/isoch.c:322:13: warning: variable ‘arqsz’ set but not
used [-Wunused-but-set-variable]
u32 isoch, arqsz;
^~~~~
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Yunfeng Ye [Tue, 17 Dec 2019 12:21:37 +0000 (20:21 +0800)]
agp: remove unused variable mcapndx
This patch fix the following warning:
drivers/char/agp/isoch.c: In function ‘agp_3_5_isochronous_node_enable’:
drivers/char/agp/isoch.c:87:5: warning: variable ‘mcapndx’ set but not
used [-Wunused-but-set-variable]
u8 mcapndx;
^~~~~~~
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Fri, 3 Jan 2020 01:04:43 +0000 (17:04 -0800)]
Merge tag 'sizeof_field-v5.5-rc5' of git://git./linux/kernel/git/kees/linux
Pull final sizeof_field conversion from Kees Cook:
"Remove now unused FIELD_SIZEOF() macro (Kees Cook)"
* tag 'sizeof_field-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kernel.h: Remove unused FIELD_SIZEOF()
Linus Torvalds [Fri, 3 Jan 2020 00:46:30 +0000 (16:46 -0800)]
Merge tag 'gcc-plugins-v5.5-rc5' of git://git./linux/kernel/git/kees/linux
Pull gcc-plugins fix from Kees Cook:
"Build flexibility fix: allow builds to disable plugins even when
plugins available (Arnd Bergmann)"
* tag 'gcc-plugins-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: make it possible to disable CONFIG_GCC_PLUGINS again
Linus Torvalds [Fri, 3 Jan 2020 00:42:10 +0000 (16:42 -0800)]
Merge tag 'seccomp-v5.5-rc5' of git://git./linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"Fixes for seccomp_notify_ioctl uapi sanity from Sargun Dhillon.
The bulk of this is fixing the surrounding samples and selftests so
that seccomp can correctly validate the seccomp_notify_ioctl buffer as
being initially zeroed.
Summary:
- Fix samples and selftests to zero passed-in buffer
- Enforce zeroed buffer checking
- Verify buffer sanity check in selftest"
* tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV
seccomp: Check that seccomp_notif is zeroed out by the user
selftests/seccomp: Zero out seccomp_notif
samples/seccomp: Zero out members based on seccomp_notif_sizes
Paul Burton [Thu, 2 Jan 2020 04:50:38 +0000 (20:50 -0800)]
MIPS: Avoid VDSO ABI breakage due to global register variable
Declaring __current_thread_info as a global register variable has the
effect of preventing GCC from saving & restoring its value in cases
where the ABI would typically do so.
To quote GCC documentation:
> If the register is a call-saved register, call ABI is affected: the
> register will not be restored in function epilogue sequences after the
> variable has been assigned. Therefore, functions cannot safely return
> to callers that assume standard ABI.
When our position independent VDSO is built for the n32 or n64 ABIs all
functions it exposes should be preserving the value of $gp/$28 for their
caller, but in the presence of the __current_thread_info global register
variable GCC stops doing so & simply clobbers $gp/$28 when calculating
the address of the GOT.
In cases where the VDSO returns success this problem will typically be
masked by the caller in libc returning & restoring $gp/$28 itself, but
that is by no means guaranteed. In cases where the VDSO returns an error
libc will typically contain a fallback path which will now fail
(typically with a bad memory access) if it attempts anything which
relies upon the value of $gp/$28 - eg. accessing anything via the GOT.
One fix for this would be to move the declaration of
__current_thread_info inside the current_thread_info() function,
demoting it from global register variable to local register variable &
avoiding inadvertently creating a non-standard calling ABI for the VDSO.
Unfortunately this causes issues for clang, which doesn't support local
register variables as pointed out by commit
fe92da0f355e ("MIPS: Changed
current_thread_info() to an equivalent supported by both clang and GCC")
which introduced the global register variable before we had a VDSO to
worry about.
Instead, fix this by continuing to use the global register variable for
the kernel proper but declare __current_thread_info as a simple extern
variable when building the VDSO. It should never be referenced, and will
cause a link error if it is. This resolves the calling convention issue
for the VDSO without having any impact upon the build of the kernel
itself for either clang or gcc.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes:
ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <christian.brauner@canonical.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Linus Torvalds [Fri, 3 Jan 2020 00:39:51 +0000 (16:39 -0800)]
Merge tag 'pstore-v5.5-rc5' of git://git./linux/kernel/git/kees/linux
Pull pstore bug fixes from Kees Cook:
- always reset circular buffer state when writing new dump (Aleksandr
Yashkin)
- fix rare error-path memory leak (Kees Cook)
* tag 'pstore-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ram: Write new dumps to start of recycled zones
pstore/ram: Fix error-path memory leak in persistent_ram_new() callers
Dominik Brodowski [Wed, 1 Jan 2020 19:05:03 +0000 (20:05 +0100)]
Revert "fs: remove ksys_dup()"
This reverts commit
8243186f0cc7 ("fs: remove ksys_dup()") and the
subsequent fix for it in commit
2d3145f8d280 ("early init: fix error
handling when opening /dev/console").
Trying to use filp_open() and f_dupfd() instead of pseudo-syscalls
caused more trouble than what is worth it: it requires accessing vfs
internals and it turns out there were other bugs in it too.
In particular, the file reference counting was wrong - because unlike
the original "open+2*dup" sequence it used "filp_open+3*f_dupfd" and
thus had an extra leaked file reference.
That in turn then caused odd problems with Androidx86 long after boot
becaue of how the extra reference to the console kept the session active
even after all file descriptors had been closed.
Reported-by: youling 257 <youling257@gmail.com>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Wed, 11 Dec 2019 13:39:28 +0000 (14:39 +0100)]
gcc-plugins: make it possible to disable CONFIG_GCC_PLUGINS again
I noticed that randconfig builds with gcc no longer produce a lot of
ccache hits, unlike with clang, and traced this back to plugins
now being enabled unconditionally if they are supported.
I am now working around this by adding
export CCACHE_COMPILERCHECK=/usr/bin/size -A %compiler%
to my top-level Makefile. This changes the heuristic that ccache uses
to determine whether the plugins are the same after a 'make clean'.
However, it also seems that being able to just turn off the plugins is
generally useful, at least for build testing it adds noticeable overhead
but does not find a lot of bugs additional bugs, and may be easier for
ccache users than my workaround.
Fixes:
9f671e58159a ("security: Create "kernel hardening" config area")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20191211133951.401933-1-arnd@arndb.de
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Sargun Dhillon [Mon, 30 Dec 2019 20:38:11 +0000 (12:38 -0800)]
selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV
This adds logic to the user_notification_basic test to set a member
of struct seccomp_notif to an invalid value to ensure that the kernel
returns EINVAL if any of the struct seccomp_notif members are set to
invalid values.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191230203811.4996-1-sargun@sargun.me
Fixes:
6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
projects / platform / kernel / linux-rpi.git / log