am33xx/board: use cpu_mmc_init() for default mmc initialization
[kernel/u-boot.git] / include /
2012-10-25 Tom Riniam33xx: Add SPI SPL as an option
2012-10-25 Stefano BabicOMAP3: add video support to the mcx board
2012-10-25 Stefano BabicOMAP3: mcx: updated to new hardware revision
2012-10-25 Stefano BabicOMAP3: updated pinmux and environment for new revision...
2012-10-23 Igor Grinbergcm-t35: clean unused defines from config
2012-10-23 Andrew Bradfordconfigs: Fix usage of mmc rescan
2012-10-18 402jagan@gmail.comversatile: board configs: Use buffered writes on flash
2012-10-18 Marek Vasutdm: Move s3c24xx USB driver to a proper place
2012-10-18 Marek Vasutdm: wdt: arm: Move tnetv107x into drivers/watchdog/
2012-10-16 Albert ARIBAUDRemove lh7a40x cpu and serial driver
2012-10-16 Łukasz Dałekh2200: Add support for iPAQ h2200 palmtop
2012-10-15 Tom RiniMerge branch 'agust@denx.de-next' of git://git.denx...
2012-10-15 Fabio Estevamconfigs: mx6qsabre_common.h: Use default clock definitions
2012-10-15 Benoît Thébaudeaumx31: Fix PDR0_CSI_PODF
2012-10-15 Otavio Salvadormx6qsabreauto: Use ttymxc3 as console
2012-10-15 Benoît Thébaudeaumx5/6: Define default SoC input clock frequencies
2012-10-15 Fabio Estevammx6q: Add basic support for mx6qsabreauto
2012-10-15 Fabio Estevamconfigs: mx6: Add a common config file
2012-10-15 Fabio Estevammx6qsabresd: Add Ethernet support
2012-10-15 Fabio Estevammx6: Add basic support for mx6qsabresd board.
2012-10-15 Stephen Warrentegra: enable CONFIG_CMD_PART
2012-10-15 Tom WarrenTegra20: Move some include files to arch-tegra for...
2012-10-15 Thierry Redingtegra: Rename Medcom to Medcom-Wide
2012-10-15 Simon Glassinput: Allow key ghosting filter to be disabled
2012-10-15 Simon Glassinput: Separate out keyboard repeat/delay from init
2012-10-15 Pavel Herrmannsata.h: Make all sata/ata drivers include <sata.h>
2012-10-15 Tom Riniide.h: Make ide_(read|write) match block_dev_desc_t...
2012-10-15 Lukasz Dalekusb.h: Add udc_disconnect prototype to usb.h
2012-10-15 Lucas Stachusb: ulpi: add indicator configuration function
2012-10-15 Lucas Stachusb: lowlevel interface change to support multiple...
2012-10-15 Stefan Roeseppc4xx: Remove AP1000 board support
2012-10-15 Stefan Roeseppc4xx: Remove ML2 board support
2012-10-15 Stefan Roeseppc4xx: Remove IOP480 support
2012-10-15 Marek Vasutserial: Remove CONFIG_SERIAL_MULTI from remaining sources
2012-10-15 Marek Vasutserial: Remove CONFIG_SERIAL_MULTI from config files
2012-10-15 Marek Vasutserial: bfin: Flip the jtag serial console to CONFIG_SE...
2012-10-15 Marek Vasutserial: zoom2: Remove zoom2 serial prototypes from...
2012-10-15 Marek Vasutserial: bfin: Adjust serial_register_bfin_uart()
2012-10-15 Marek Vasutserial: bfin: Remove the bfin_serialN_device exports...
2012-10-15 Marek Vasutserial: ns16550: Move serial registration from serial_i...
2012-10-15 Marek Vasutserial: mpc512x: Move serial registration from serial_i...
2012-10-15 Marek Vasutserial: microblaze: Move serial registration from seria...
2012-10-15 Tom Riniserial: zynq: Move serial registration from serial_init...
2012-10-15 Marek Vasutserial: s5p: Move serial registration from serial_initi...
2012-10-15 Marek Vasutserial: pxa: Move serial registration from serial_initi...
2012-10-15 Marek Vasutserial: s3c24xx: Move serial registration from serial_i...
2012-10-15 Marek Vasutserial: mpc512x: Properly define CONFIG_SYS_PSC3 in...
2012-10-15 Marek Vasutserial: pxa: Make use of default_serial_console in...
2012-10-15 Marek Vasutserial: Rename .init() and .uninit() in serial_device
2012-10-15 Marek Vasutserial: Coding style cleanup of struct serial_device
2012-10-15 Marek VasutCOMMON: Use __stringify() instead of rest of implementa...
2012-10-15 Marek VasutCOMMON: Use __stringify() instead of MK_STR()
2012-10-15 Marek VasutCOMMON: Use __stringify() instead of xstr()
2012-10-15 Marek VasutCOMMON: Add __stringify() function
2012-10-15 Tom Rinigth2: Remove this platform
2012-10-12 Marek Vasutm28: Properly configure the SPI flash chipselect
2012-10-08 Luka Perkovide: Correct IDE_BUS(dev) macro
2012-10-08 Rommel Custodioml507: Fix Xilinx uartlite driver hang
2012-10-05 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arm
2012-10-05 Wolfgang DenkMPC85xx: remove support for TQM85xx boards
2012-10-04 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arm
2012-10-04 Dinh NguyenARM: Add Altera SOCFPGA Cyclone5
2012-10-04 Michal Simekxilinx: Add new Zynq board
2012-10-04 Michal Simekserial: Add Zynq serial driver
2012-10-04 Stefan RoeseARM: Add X600 board support (SPEAr600 based)
2012-10-04 Simon Glassext4: Rename block group descriptor table from gd to bgd
2012-10-03 Albert ARIBAUDMerge remote-tracking branch 'u-boot-marvell/master'
2012-10-03 Valentin Longchampkm_kirkwood: enable MV88E6352_SWITCH support for kmnusa
2012-10-03 Albert ARIBAUDedminiv2: increase malloc len to 256K
2012-10-03 Luka Perkovkirkwood: add support for Iomega iConnect board
2012-10-03 Simon GuinotARM: add support for d2 Network v2
2012-10-03 Simon GuinotARM: add support for Network Space v2 Lite and Mini
2012-10-03 Simon Guinotlacie_kw: add support for EFI partitions
2012-10-03 Gabriel HuauARM : Add support for MINI2440 (s3c2440).
2012-10-03 Nobuhiro Iwamatsurmobile: armadillo-800eva: Remove CONFIG_SYS_NO_L2CACHE
2012-10-03 Nobuhiro Iwamatsurmobile: armadillo-800eva: Add Support NFS and BOOTZ...
2012-10-03 Nobuhiro Iwamatsurmobile: armadillo-800eva: Add Support CONFIG_OF_LIBFDT
2012-10-03 Hideyuki Sanoarm: rmobile: Add support for ATMARK-TECHNO Armadillo...
2012-10-03 Nobuhiro Iwamatsuarm: rmobile: kzm9g: Add CONFIG_GLOBAL_TIMER to board...
2012-10-03 Nobuhiro Iwamatsuarm: rmobile: Add support TMU base timer function
2012-10-03 Nobuhiro Iwamatsuarm: rmobile: kzm9g: remove unrelated config
2012-10-03 Nobuhiro Iwamatsuarm: rmobile: kzm9g: Add LIBFDT support
2012-10-03 Tetsuyuki Kobayashiarm: rmobile: kzm9g: remove unrelated config
2012-10-03 Tetsuyuki Kobayashiarm: rmobile: kzm9g: add NFS_TIMEOUT in config file
2012-10-03 Tetsuyuki Kobayashiarm: rmobile: kzm9g: Fix CONFIG_BAUDRATE setting
2012-10-03 Tetsuyuki Kobayashiarm: rmobile: kzm9g: change prompt to board specific
2012-10-03 Tetsuyuki Kobayashiarm: rmobile: kzm9g: Modify sdram area
2012-10-03 Nobuhiro Iwamatsuarm: rmobile: Add supoprt for KMC KZM-A9-GT board
2012-10-02 Simon Glassbootstage: Add new bootstage IDs for board, LCD
2012-10-02 Simon Glassbootstage: Add feature to stash/unstash bootstage info
2012-10-02 Simon Glassbootstage: Store boot timings in device tree
2012-10-02 Simon Glassbootstage: Add time accumulation feature
2012-10-02 Simon Glassbootstage: Export bootstage_add_record() function
2012-10-02 Wolfgang Grandeggermpc52xx/motionpro: fix monitor size and update default...
2012-10-01 Peter Meerwaldomap4_panda: remove CONFIG_PANDA, not used
2012-10-01 Koen Kooiam335x-evm config: decrease bootdelay to 1s and mount...
2012-10-01 Ilya YanokOMAP: networking support for SPL
2012-10-01 Ilya Yanokam335x_evm: enable networking in SPL
2012-10-01 Bastian Ruppertdavinci: ea20: add some configs and default environmet...
2012-10-01 Bastian Ruppertdavinci: ea20: the console is always set to the serial...
next