HID: hyperv: fix possible memory leak in mousevsc_probe()
[platform/kernel/linux-rpi.git] / drivers / tty /
2022-11-10 Helge Dellerparisc: Make 8250_gsc driver dependend on CONFIG_PARISC
2022-11-10 Lukas Wunnerserial: ar933x: Deassert Transmit Enable on ->rs485_con...
2022-11-03 Lukas Wunnerserial: Deassert Transmit Enable on probe in driver...
2022-11-03 Lino Sanfilipposerial: core: move RS485 configuration tasks from drive...
2022-10-26 Pali Rohárserial: 8250: Fix restoring termios speed after suspend
2022-10-26 Sherry Suntty: serial: fsl_lpuart: disable dma rx/tx use flags...
2022-10-26 Ilpo Järvinenserial: 8250: Toggle IER bits on only after irq has...
2022-10-26 Dan Carpenterdrivers: serial: jsm: fix some leaks in probe
2022-10-26 Shubhrajyoti Dattatty: xilinx_uartps: Fix the ignore_status
2022-10-26 Maciej W. Rozyckiserial: 8250: Request full 16550A feature probing for...
2022-10-26 Maciej W. Rozyckiserial: 8250: Let drivers request full 16550A feature...
2022-09-28 Ilpo Järvinenserial: tegra-tcu: Use uart_xmit_advance(), fixes icoun...
2022-09-28 Ilpo Järvinenserial: tegra: Use uart_xmit_advance(), fixes icount...
2022-09-28 Lukas Wunnerserial: fsl_lpuart: Reset prior to registration
2022-09-23 Sergiu Mogatty: serial: atmel: Preserve previous USART mode if...
2022-09-23 Lino Sanfilipposerial: atmel: remove redundant assignment in rs485_config
2022-09-08 Mazin Al Haddadtty: n_gsm: add sanity check for gsm->receive in gsm_re...
2022-09-08 Sherry Suntty: serial: lpuart: disable flow control while waiting...
2022-09-08 Helge Dellervt: Clear selection before changing the font
2022-09-08 Shenwei Wangserial: fsl_lpuart: RS485 RTS polariy is inverse
2022-08-25 Liang Hetty: serial: Fix refcount leak bug in ucc_uart.c
2022-08-17 Cameron Williamstty: 8250: Add support for Brainboxes PX cards.
2022-08-17 Maciej W. Rozyckiserial: 8250: Add proper clock handling for OxSemi...
2022-08-17 Maciej W. Rozyckiserial: 8250: Fold EndRun device support into OxSemi...
2022-08-17 Andy Shevchenkoserial: 8250_pci: Replace dev_*() by pci_*() macros
2022-08-17 Andy Shevchenkoserial: 8250_pci: Refactor the loop in pci_ite887x_init()
2022-08-17 Sherry Suntty: serial: fsl_lpuart: correct the count of break...
2022-08-17 Doug Bergerserial: 8250_bcm7271: Save/restore RTS in suspend/resume
2022-08-17 Daniel Starketty: n_gsm: fix missing corner cases in gsmld_poll()
2022-08-17 Daniel Starketty: n_gsm: fix DM command
2022-08-17 Daniel Starketty: n_gsm: fix wrong T1 retry count handling
2022-08-17 Uwe Kleine-Königserial: 8250_fsl: Don't report FE, PE and OE twice
2022-08-17 Daniel Starketty: n_gsm: fix resource allocation order in gsm_activa...
2022-08-17 Daniel Starketty: n_gsm: fix race condition in gsmld_write()
2022-08-17 Daniel Starketty: n_gsm: fix packet re-transmission without open...
2022-08-17 Daniel Starketty: n_gsm: fix non flow control frames during mux...
2022-08-17 Daniel Starketty: n_gsm: fix missing timer to handle stalled links
2022-08-17 Daniel Starketty: n_gsm: fix wrong queuing behavior in gsm_dlci_data...
2022-08-17 Daniel Starketty: n_gsm: fix tty registration before control channel...
2022-08-17 Daniel Starketty: n_gsm: fix user open not possible at responder...
2022-08-17 Zhenguo Zhaotty: n_gsm: Delete gsmtty open SABM frame when config...
2022-08-17 Ilpo Järvinenserial: 8250_dw: Store LSR into lsr_saved_flags in...
2022-08-17 Miquel Raynalserial: 8250: dma: Allow driver operations before start...
2022-08-17 Maciej W. Rozyckiserial: 8250: Export ICR access helpers for internal use
2022-08-17 Narendra Hadkeserial: mvebu-uart: uart2 error bits clearing
2022-08-17 Tetsuo Handatty: vt: initialize unicode screen buffer
2022-07-29 Jiri Slabytty: use new tty_insert_flip_string_and_push_buffer...
2022-07-29 Jiri Slabytty: extract tty_flip_buffer_commit() from tty_flip_buf...
2022-07-29 Jiri Slabytty: drop tty_schedule_flip()
2022-07-29 Jiri Slabytty: drivers/tty/, stop using tty_schedule_flip()
2022-07-29 Pali Rohárserial: mvebu-uart: correctly report configured baudrat...
2022-07-21 Ilpo Järvinenserial: 8250: Fix PM usage_count for console handover
2022-07-21 Ilpo Järvinenserial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
2022-07-21 Ilpo Järvinenserial: stm32: Clear prev values before setting RTS...
2022-07-21 Yi Yangserial: 8250: fix return error code in serial8250_reque...
2022-07-21 Yangxi Xiangvt: fix memory overlapping when deleting chars in the...
2022-07-21 Chanho Parktty: serial: samsung_tty: set dma burst_size to 1
2022-07-12 AngeloGioacchino... Revert "serial: 8250_mtk: Make sure to select the right...
2022-07-12 daniel.starke@siem... tty: n_gsm: fix encoding of command/response bit
2022-07-12 Hui WangRevert "serial: sc16is7xx: Clear RS485 bits in the...
2022-07-12 Daniel Starketty: n_gsm: fix invalid gsmtty_write_room() result
2022-07-12 AngeloGioacchino... serial: 8250_mtk: Make sure to select the right FEATURE_SEL
2022-07-12 Daniel Starketty: n_gsm: fix sometimes uninitialized warning in...
2022-07-12 Daniel Starketty: n_gsm: fix invalid use of MSC in advanced option
2022-07-12 Daniel Starketty: n_gsm: fix missing update of modem controls after...
2022-07-12 Daniel Starketty: n_gsm: fix frame reception handling
2022-07-12 Zhenguo Zhaotty: n_gsm: Save dlci address open status when config...
2022-07-12 Zhenguo Zhaotty: n_gsm: Modify CR,PF bit when config requester
2022-07-12 Hui Wangserial: sc16is7xx: Clear RS485 bits in the shutdown
2022-06-25 Lukas Wunnerserial: core: Initialize rs485 RTS polarity already...
2022-06-22 Ilpo Järvinenserial: 8250: Store to lsr_save_flags after lsr read
2022-06-22 Tony Lindgrentty: n_gsm: Debug output allocation must use GFP_ATOMIC
2022-06-22 Vincent Whitchurchtty: goldfish: Fix free_irq() on remove
2022-06-14 John Ognessserial: msm_serial: disable interrupts in __msm_console...
2022-06-14 Changbin Dusysrq: do not omit current cpu when showing backtrace...
2022-06-14 Duoming Zhoudrivers: tty: serial: Fix deadlock in sa1100_set_termios()
2022-06-14 Huang Guobintty: Fix a possible resource leak in icom_probe
2022-06-14 Zheyu Matty: synclink_gt: Fix null-pointer-dereference in slgt_...
2022-06-14 Ilpo Järvinenserial: stm32-usart: Correct CSIZE, bits, and parity
2022-06-14 Ilpo Järvinenserial: st-asc: Sanitize CSIZE and correct PARENB for CS7
2022-06-14 Ilpo Järvinenserial: sifive: Sanitize CSIZE and c_iflag
2022-06-14 Ilpo Järvinenserial: sh-sci: Don't allow CS5-6
2022-06-14 Ilpo Järvinenserial: txx9: Don't allow CS5-6
2022-06-14 Ilpo Järvinenserial: rda-uart: Don't allow CS5-6
2022-06-14 Ilpo Järvinenserial: digicolor-usart: Don't allow CS5-6
2022-06-14 YueHaibingserial: cpm_uart: Fix build error without CONFIG_SERIAL...
2022-06-14 Ilpo Järvinenserial: 8250_fintek: Check SER_RS485_RTS_* only with...
2022-06-14 John Ognessserial: meson: acquire port->lock in startup()
2022-06-14 Tony Lindgrentty: n_gsm: Fix packet data hex dump output
2022-06-14 Tony Lindgrentty: n_gsm: Don't ignore write return value in gsmld_ou...
2022-06-14 Maciej W. Rozyckiserial: sifive: Report actual baud base rather than...
2022-06-14 Sherry Suntty: serial: fsl_lpuart: fix potential bug when using...
2022-06-14 Miaoqian Linserial: 8250_aspeed_vuart: Fix potential NULL dereferen...
2022-06-14 Daniel Gibsontty: n_tty: Restore EOF push handling behavior
2022-06-14 Miaoqian Lintty: serial: owl: Fix missing clk_disable_unprepare...
2022-06-14 Wang Weiyangtty: goldfish: Use tty_port_destroy() to destroy port
2022-06-09 Jiri Slabyserial: pch: don't overwrite xmit->buf[0] by x_char
2022-06-09 Laurent Viviertty: goldfish: Introduce gf_ioread32()/gf_iowrite32()
2022-06-09 Qi Zhengtty: fix deadlock caused by calling printk() under...
2022-05-18 AngeloGioacchino... serial: 8250_mtk: Fix register address for XON/XOFF...
next