arm64: dts: exynos: Update Exynos5433 CHIPID node
[platform/kernel/linux-exynos.git] / drivers / tty /
2019-02-14 Marek Szyprowskiserial: samsung: Enable baud clock for UART reset proce...
2019-02-14 Seung-Woo Kimtty: serial: samsung: Increase maximum baudrate
2019-02-12 Andy Shevchenkoserial: 8250_pci: Make PCI class test non fatal
2019-02-12 Greg Kroah-Hartmanserial: fix race between flush_to_ldisc and tty_open
2019-02-12 Beomho Seotty: serial: samsung: Properly set flags in autoCTS...
2019-02-12 Andy Duanserial: fsl_lpuart: clear parity enable bit when disabl...
2019-01-31 Nicolas Pitrevt: invoke notifier on screen size change
2019-01-31 Paul Fulghumtty/n_hdlc: fix __might_sleep warning
2019-01-31 Samir Virmaniuart: Fix crash in uart_write and uart_put_char
2019-01-31 Greg Kroah-Hartmantty: Handle problem if line discipline does not have...
2019-01-26 Sergey Senozhatskytty/serial: do not free trasnmit buffer page under...
2019-01-26 Anders Roxellserial: set suppress_bind_attrs flag only if builtin
2019-01-23 Dmitry Safonovtty: Don't hold ldisc lock in tty_reopen() if ldisc...
2019-01-23 Dmitry Safonovtty: Simplify tty->count math in tty_reopen()
2019-01-23 Dmitry Safonovtty: Hold tty_ldisc_lock() during tty_reopen()
2019-01-23 Dmitry Safonovtty/ldsem: Wake up readers after timed out down_write()
2019-01-13 Yangtao Liserial/sunsu: fix refcount leak
2019-01-09 Nava kishore Manneserial: uartps: Fix interrupt mask issue to handle...
2018-12-21 Yangtao Lidrivers/tty: add missing of_node_put()
2018-12-13 Macpaul Linkgdboc: fix KASAN global-out-of-bounds bug in param_set...
2018-12-13 Chanho Parktty: do not set TTY_IO_ERROR flag if console port
2018-12-13 Peter Shihtty: serial: 8250_mtk: always resume the device in...
2018-12-08 Laura Abbottkgdboc: Fix warning with module build
2018-12-08 Laura Abbottkgdboc: Fix restrict error
2018-12-01 Greg Kroah-Hartmantty: wipe buffer if not echoing data
2018-12-01 Linus Torvaldstty: wipe buffer.
2018-11-21 H. Peter Anvintermios, tty/tty_baudrate.c: fix buffer overrun
2018-11-21 Phil Elwellsc16is7xx: Fix for multi-channel stall
2018-11-21 Miles Chentty: check name length in tty_find_polling_driver()
2018-11-13 He Zhekgdboc: Passing ekgdboc to command line causes panic
2018-10-13 Dmitry Safonovtty: Drop tty->count on tty_reopen() failure
2018-10-10 Jan Kiszkaserial: mvebu-uart: Fix reporting of effective CSIZE...
2018-10-04 Uwe Kleine-Königserial: imx: restore handshaking irq for imx1
2018-10-04 Christophe Leroyserial: cpm_uart: return immediately from console poll
2018-10-04 Stefan Agnertty: serial: lpuart: avoid leaking struct tty_struct
2018-10-04 Zhouyang Jiadrivers/tty: add error handling for pcmcia_loop_config
2018-10-04 Geert Uytterhoevenserial: sh-sci: Stop RX FIFO timer during port shutdown
2018-09-29 Gustavo A. R. Silvatty: vt_ioctl: fix potential Spectre v1
2018-09-26 Michal Simekearlycon: Remove hardcoded port->uartclk initialization...
2018-09-26 Michal Simekearlycon: Initialize port->uartclk based on clock-frequ...
2018-09-26 Johan Hovoldtty: fix termios input-speed encoding
2018-09-26 Johan Hovoldtty: fix termios input-speed encoding when using BOTHER
2018-09-19 Anton Vasilyevtty: rocket: Fix possible buffer overwrite on register_PCI
2018-09-09 Tycho Andersenuart: fix race between uart_put_char() and uart_shutdown()
2018-08-24 Matthijs van Duinpty: fix O_CLOEXEC for TIOCGPTPEER
2018-08-22 Srinath Mannamserial: 8250_dw: Add ACPI support for uart on Broadcom SoC
2018-08-22 Chen Huserial: 8250_dw: always set baud rate in dw8250_set_termios
2018-08-22 Aaron Sierraserial: 8250_exar: Read INT0 from slave device, too
2018-08-22 Marktty: serial: 8250: Revert NXP SC16C2552 workaround
2018-08-03 DaeRyong Jeongtty: Fix data race in tty_insert_flip_string_fixed_flag
2018-08-03 Stewart Smithhvc_opal: don't set tb_ticks_per_usec in udbg_init_opal...
2018-07-08 Alexander Potapenkovt: prevent leaking uninitialized data to userspace...
2018-07-08 Johan Hovoldserdev: fix memleak on module unload
2018-07-08 Andy Shevchenkoserial: 8250_pci: Remove stalled entries in blacklist
2018-07-08 Tetsuo Handan_tty: Access echo_* variables carefully.
2018-07-08 Tetsuo Handan_tty: Fix stall at n_tty_receive_char_special().
2018-07-03 Daniel Wagnerserial: sh-sci: Use spin_{try}lock_irqsave instead...
2018-06-16 Dave Martintty: pl011: Avoid spuriously stuck-off interrupts
2018-06-16 Tony Lindgrenserial: 8250: omap: Fix idling of clocks for unused...
2018-06-16 Marek Szyprowskiserial: samsung: fix maxburst parameter for DMA transac...
2018-06-16 Sebastian Andrzej... tty/serial: atmel: use port->name as name in request_irq()
2018-06-16 Geert Uytterhoevenserial: sh-sci: Stop using printk format %pCr
2018-05-25 Uwe Kleine-Königserial: altera: ensure port->regshift is honored consis...
2018-05-25 Vignesh Rserial: 8250: Don't service RX FIFO if interrupts are...
2018-05-25 Geert Uytterhoevenserial: arc_uart: Fix out-of-bounds access through...
2018-05-25 Geert Uytterhoevenserial: fsl_lpuart: Fix out-of-bounds access through...
2018-05-25 Geert Uytterhoevenserial: imx: Fix out-of-bounds access through serial...
2018-05-25 Geert Uytterhoevenserial: mxs-auart: Fix out-of-bounds access through...
2018-05-25 Geert Uytterhoevenserial: samsung: Fix out-of-bounds access through seria...
2018-05-25 Geert Uytterhoevenserial: sh-sci: Fix out-of-bounds access through DT...
2018-05-25 Geert Uytterhoevenserial: xuartps: Fix out-of-bounds access through DT...
2018-05-01 Daniel Kurtzearlycon: Use a pointer table to fix __earlycon_table...
2018-05-01 Tetsuo Handatty: Use __GFP_NOFAIL for tty_ldisc_get()
2018-05-01 Tetsuo Handatty: Avoid possible error pointer dereference at tty_ld...
2018-05-01 Tony Lindgrentty: n_gsm: Fix DLCI handling for ADM mode if debug...
2018-05-01 Tony Lindgrentty: n_gsm: Fix long delays with control frame timeouts...
2018-05-01 Tetsuo Handatty: Don't call panic() at tty_ldisc_init()
2018-04-26 Aaron Sierratty: serial: exar: Relocate sleep wake-up handling
2018-04-24 Tejun Heotty: make n_tty_read() always abort if hangup is in...
2018-04-12 Tony Lindgrentty: n_gsm: Allow ADM response in addition to UA for...
2018-04-08 Mike Frysingervt: change SGR 21 to follow the standards
2018-04-08 Joel Stanleyserial: 8250: Add Nuvoton NPCM UART
2018-03-28 Linus Torvaldstty: vt: fix up tabstops properly
2018-03-24 Andy Shevchenkoserial: 8250_pci: Don't fail on multiport card class
2018-03-24 Saharapty: cancel pty slave port buf's work in tty_release
2018-03-24 Stefan Potyraserial: 8250_dw: Disable clock on error
2018-03-24 Sebastian Andrzej... tty: goldfish: Enable 'earlycon' only if built-in
2018-03-19 Greentime Huearlycon: add reg-offset to physical address before...
2018-03-19 Sebastian Andrzej... serial: core: mark port as initialized in autoconfig
2018-03-19 Nikola Ciprichserial: 8250_pci: Add Brainboxes UC-260 4 port serial...
2018-03-19 Jonas Danielssontty/serial: atmel: add new version check for usart
2018-03-19 Ulrich Hechtserial: sh-sci: prevent lockup on full TTY buffers
2018-02-07 Sebastian Andrzej... serial: core: mark port as initialized after successful...
2018-02-03 Fabio Estevamserial: imx: Only wakeup via RTSDEN bit if the system...
2018-02-03 Wei Yongjunserial: 8250_uniphier: fix error return code in uniphie...
2018-02-03 Masahiro Yamadaserial: 8250_of: fix return code when probe function...
2018-02-03 Gaurav Kohlitty: fix data race between tty_init_dev and flush of buf
2018-01-02 Johan Hovoldtty: fix tty_ldisc_receive_buf() documentation
2018-01-02 Linus Torvaldsn_tty: fix EXTPROC vs ICANON interaction with TIOCINQ...
2017-12-20 Johan Hovoldserdev: ttyport: enforce tty-driver open() requirement
next