thermal: core: call put_device() only after device_register() fails
[platform/kernel/linux-rpi.git] / drivers / tty / serial /
2023-01-24 Tobias Schrammserial: atmel: fix incorrect baudrate setup
2023-01-24 Lino Sanfilipposerial: amba-pl011: fix high priority character transmi...
2023-01-24 Ilpo Järvinenserial: pch_uart: Pass correct sg to dma_unmap_sg()
2023-01-24 Krzysztof Kozlowskitty: serial: qcom-geni-serial: fix slab-out-of-bounds...
2023-01-14 Rasmus Villemoesserial: fixup backport of "serial: Deassert Transmit...
2022-12-31 Yuan Canserial: sunsab: Fix error handling in sunsab_init()
2022-12-31 Gabriel Somloserial: altera_uart: fix locking in polling mode
2022-12-31 Jiri Slabytty: serial: altera_uart_{r,t}x_chars() need only uart_port
2022-12-31 Jiri Slabytty: serial: clean up stop-tx part in altera_uart_tx_ch...
2022-12-31 Xiongfeng Wangserial: pch: Fix PCI device refcount leak in pch_reques...
2022-12-31 Valentin Caronserial: stm32: move dma_request_chan() before clk_prepa...
2022-12-31 delisunserial: pl011: Do not clear RX FIFO & RX interrupt...
2022-12-31 Jiamei Xieserial: amba-pl011: avoid SBSA UART accessing DMACR...
2022-12-31 Yuan Canserial: 8250_bcm7271: Fix error handling in brcmuart_init()
2022-12-31 Kartikserial: tegra: Read DMA status before terminating
2022-12-08 Lukas Wunnerserial: stm32: Deassert Transmit Enable on ->rs485_config()
2022-12-08 Marek Vasutserial: stm32: Use TC interrupt to deassert GPIO RTS...
2022-12-08 Marek Vasutserial: stm32: Factor out GPIO RTS toggling into separa...
2022-12-02 Lukas Wunnerserial: 8250: 8250_omap: Avoid RS485 RTS glitch on...
2022-12-02 Sherry Suntty: serial: fsl_lpuart: don't break the on-going trans...
2022-12-02 Ilpo Järvinenserial: fsl_lpuart: Fill in rs485_supported
2022-12-02 Ilpo Järvinenserial: Add rs485_supported to uart_port
2022-11-26 Ilpo Järvinenserial: 8250_lpss: Use 16B DMA burst with Elkhart Lake
2022-11-26 Ilpo Järvinenserial: 8250_lpss: Configure DMA also w/o DMA filter
2022-11-26 Ilpo Järvinenserial: 8250: Flush DMA Rx on RLSI
2022-11-26 Ilpo Järvinenserial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs
2022-11-26 Shawn Guoserial: imx: Add missing .thaw_noirq hook
2022-11-26 Tony Lindgrenserial: 8250: omap: Flush PM QOS work on remove
2022-11-26 Tony Lindgrenserial: 8250: omap: Fix unpaired pm_runtime_put_sync...
2022-11-26 Matthias Schifferserial: 8250_omap: remove wait loop from Errata i202...
2022-11-26 Tony Lindgrenserial: 8250: omap: Fix missing PM runtime calls for...
2022-11-10 Helge Dellerparisc: Make 8250_gsc driver dependend on CONFIG_PARISC
2022-11-10 Lukas Wunnerserial: ar933x: Deassert Transmit Enable on ->rs485_con...
2022-11-03 Lukas Wunnerserial: Deassert Transmit Enable on probe in driver...
2022-11-03 Lino Sanfilipposerial: core: move RS485 configuration tasks from drive...
2022-10-26 Pali Rohárserial: 8250: Fix restoring termios speed after suspend
2022-10-26 Sherry Suntty: serial: fsl_lpuart: disable dma rx/tx use flags...
2022-10-26 Ilpo Järvinenserial: 8250: Toggle IER bits on only after irq has...
2022-10-26 Dan Carpenterdrivers: serial: jsm: fix some leaks in probe
2022-10-26 Shubhrajyoti Dattatty: xilinx_uartps: Fix the ignore_status
2022-10-26 Maciej W. Rozyckiserial: 8250: Request full 16550A feature probing for...
2022-10-26 Maciej W. Rozyckiserial: 8250: Let drivers request full 16550A feature...
2022-09-28 Ilpo Järvinenserial: tegra-tcu: Use uart_xmit_advance(), fixes icoun...
2022-09-28 Ilpo Järvinenserial: tegra: Use uart_xmit_advance(), fixes icount...
2022-09-28 Lukas Wunnerserial: fsl_lpuart: Reset prior to registration
2022-09-23 Sergiu Mogatty: serial: atmel: Preserve previous USART mode if...
2022-09-23 Lino Sanfilipposerial: atmel: remove redundant assignment in rs485_config
2022-09-08 Sherry Suntty: serial: lpuart: disable flow control while waiting...
2022-09-08 Shenwei Wangserial: fsl_lpuart: RS485 RTS polariy is inverse
2022-08-25 Liang Hetty: serial: Fix refcount leak bug in ucc_uart.c
2022-08-17 Cameron Williamstty: 8250: Add support for Brainboxes PX cards.
2022-08-17 Maciej W. Rozyckiserial: 8250: Add proper clock handling for OxSemi...
2022-08-17 Maciej W. Rozyckiserial: 8250: Fold EndRun device support into OxSemi...
2022-08-17 Andy Shevchenkoserial: 8250_pci: Replace dev_*() by pci_*() macros
2022-08-17 Andy Shevchenkoserial: 8250_pci: Refactor the loop in pci_ite887x_init()
2022-08-17 Sherry Suntty: serial: fsl_lpuart: correct the count of break...
2022-08-17 Doug Bergerserial: 8250_bcm7271: Save/restore RTS in suspend/resume
2022-08-17 Uwe Kleine-Königserial: 8250_fsl: Don't report FE, PE and OE twice
2022-08-17 Ilpo Järvinenserial: 8250_dw: Store LSR into lsr_saved_flags in...
2022-08-17 Miquel Raynalserial: 8250: dma: Allow driver operations before start...
2022-08-17 Maciej W. Rozyckiserial: 8250: Export ICR access helpers for internal use
2022-08-17 Narendra Hadkeserial: mvebu-uart: uart2 error bits clearing
2022-07-29 Jiri Slabytty: drivers/tty/, stop using tty_schedule_flip()
2022-07-29 Pali Rohárserial: mvebu-uart: correctly report configured baudrat...
2022-07-21 Ilpo Järvinenserial: 8250: Fix PM usage_count for console handover
2022-07-21 Ilpo Järvinenserial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
2022-07-21 Ilpo Järvinenserial: stm32: Clear prev values before setting RTS...
2022-07-21 Yi Yangserial: 8250: fix return error code in serial8250_reque...
2022-07-21 Chanho Parktty: serial: samsung_tty: set dma burst_size to 1
2022-07-12 AngeloGioacchino... Revert "serial: 8250_mtk: Make sure to select the right...
2022-07-12 Hui WangRevert "serial: sc16is7xx: Clear RS485 bits in the...
2022-07-12 AngeloGioacchino... serial: 8250_mtk: Make sure to select the right FEATURE_SEL
2022-07-12 Hui Wangserial: sc16is7xx: Clear RS485 bits in the shutdown
2022-06-25 Lukas Wunnerserial: core: Initialize rs485 RTS polarity already...
2022-06-22 Ilpo Järvinenserial: 8250: Store to lsr_save_flags after lsr read
2022-06-14 John Ognessserial: msm_serial: disable interrupts in __msm_console...
2022-06-14 Duoming Zhoudrivers: tty: serial: Fix deadlock in sa1100_set_termios()
2022-06-14 Huang Guobintty: Fix a possible resource leak in icom_probe
2022-06-14 Ilpo Järvinenserial: stm32-usart: Correct CSIZE, bits, and parity
2022-06-14 Ilpo Järvinenserial: st-asc: Sanitize CSIZE and correct PARENB for CS7
2022-06-14 Ilpo Järvinenserial: sifive: Sanitize CSIZE and c_iflag
2022-06-14 Ilpo Järvinenserial: sh-sci: Don't allow CS5-6
2022-06-14 Ilpo Järvinenserial: txx9: Don't allow CS5-6
2022-06-14 Ilpo Järvinenserial: rda-uart: Don't allow CS5-6
2022-06-14 Ilpo Järvinenserial: digicolor-usart: Don't allow CS5-6
2022-06-14 YueHaibingserial: cpm_uart: Fix build error without CONFIG_SERIAL...
2022-06-14 Ilpo Järvinenserial: 8250_fintek: Check SER_RS485_RTS_* only with...
2022-06-14 John Ognessserial: meson: acquire port->lock in startup()
2022-06-14 Maciej W. Rozyckiserial: sifive: Report actual baud base rather than...
2022-06-14 Sherry Suntty: serial: fsl_lpuart: fix potential bug when using...
2022-06-14 Miaoqian Linserial: 8250_aspeed_vuart: Fix potential NULL dereferen...
2022-06-14 Miaoqian Lintty: serial: owl: Fix missing clk_disable_unprepare...
2022-06-09 Jiri Slabyserial: pch: don't overwrite xmit->buf[0] by x_char
2022-05-18 AngeloGioacchino... serial: 8250_mtk: Fix register address for XON/XOFF...
2022-05-18 AngeloGioacchino... serial: 8250_mtk: Fix UART_EFR register address
2022-05-18 Indan Zupancicfsl_lpuart: Don't enable interrupts too early
2022-05-18 Yang Yingliangtty/serial: digicolor: fix possible null-ptr-deref...
2022-05-09 Maciej W. Rozyckiserial: 8250: Correct the clock for EndRun PTP/1588...
2022-05-09 Maciej W. Rozyckiserial: 8250: Also set sticky MCR bits in console resto...
2022-05-09 Lino Sanfilipposerial: amba-pl011: do not time out prematurely when...
next