serial: mcf: Implement CONFIG_SERIAL_MULTI into MCF serial driver
[kernel/u-boot.git] / board /
2012-09-04 Matt Sealeyefikamx: refine USB support
2012-09-04 Fabio Estevammx28evk: Convert to mxs_adjust_memory_params()
2012-09-04 Otavio SalvadorMX28: mx28evk: Align SSP clock speed
2012-09-04 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-avr32
2012-09-03 Jens Scharsigeb_cpux9k2: fix chip select
2012-09-03 Michael Wallelsxl: support power switch
2012-09-03 Karl O. PincCosmetic doc typo fixes to the kwbimage feature docs
2012-09-03 Holger Brunckarm/km: remove unused code
2012-09-03 Valentin Longchampkm/ivm: fix string len check to support 7 char board...
2012-09-02 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-usb
2012-09-01 Wolfgang DenkMerge branch 'agust@denx.de' of git://git.denx.de/u...
2012-09-01 Wu, Joshat91: 9x5: change SMC config timing that both works...
2012-09-01 Andreas Bießmannarm:at91-boards: remove console_init_f where unnecessary
2012-09-01 Andreas Bießmannat91sam9263ek: remove unnecessary console_init_f
2012-09-01 Bo Shenarm : at91sam9x5 : fix a small bug for NAND
2012-09-01 Lukasz Majewskiarm:trats: Support for USB UDC driver at TRATS board.
2012-09-01 Benoît Thébaudeaufsl_esdhc: Remove cache snooping for i.MX
2012-09-01 Stefano BabicMX5: efikamx: substitutes GPIO_NUMBER with IMX_GPIO_NR
2012-09-01 Ashok Kumar Reddymx5:Use IMX_GPIO_NR macro
2012-09-01 Matt Sealeyefikamx: sync Smartbook DDR settings in DCD with those...
2012-09-01 Matt Sealeyefikamx: update to Efika MX Smarttop and Smartbook...
2012-09-01 Matt Sealeyefikamx: configure Smarttop PCBID and LED pads in DCD...
2012-09-01 Matt Sealeyefikamx: remove drive strength function and roll its...
2012-09-01 Matt Sealeyefikamx: move and rename Efika MX directories and confi...
2012-09-01 Marek VasutMX28: m28evk: Align SSP clock speed
2012-09-01 Ashok Kumar Reddymx6qarm2:Use IMX_GPIO_NR macro
2012-09-01 tremimx27lite: update with gpio api change (v4)
2012-09-01 Otavio Salvadormxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
2012-09-01 Fabio Estevammx53ard: Use IMX_GPIO_NR macro
2012-09-01 Fabio Estevammx51evk: Use IMX_GPIO_NR macro
2012-09-01 Fabio Estevammx53loco: Use IMX_GPIO_NR macro
2012-09-01 Benoît Thébaudeaumx35: Fix broken pin definitions
2012-09-01 Stefano BabicMX: Set a common gpio.h for all i.MX
2012-09-01 Troy Kiskymx53evk: add boot_mode support
2012-09-01 Troy Kiskymx6qsabrelite: add boot_mode support
2012-09-01 Troy Kiskyiomux: move IOMUX_GPR13_xxx defines
2012-09-01 Benoît Thébaudeaumx35: Fix typo on EDIO
2012-09-01 Vikram Narayanantx25: Use generic gpio_* calls
2012-09-01 Otavio Salvadormxs: Convert sys_proto.h prefixes to 'mxs'
2012-09-01 Rajeshwari ShindeSMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0
2012-09-01 Rajeshwari ShindeExynos5: DDR3: Add DDR3 memory setup for Exynos5250...
2012-09-01 Rajeshwari ShindeEXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
2012-09-01 Rajeshwari ShindeSMDK5250: Add smdk5250-uboot-spl.lds
2012-09-01 Rajeshwari ShindeSMDK5250: SPL: Define parametric board initializer
2012-09-01 Allen Martintegra20: move SDRAM param save to later in boot
2012-09-01 Allen Martintegra20: remove timer_init from SPL build
2012-09-01 Allen Martintegra20: make board mkdir commands unconditional
2012-09-01 Allen Martintegra20: rename tegra2 -> tegra20
2012-09-01 Stephen WarrenARM: add Raspberry Pi model B board, using BCM2835 SoC
2012-09-01 John Rigbyu8500: Separating mmc config parameters from driver
2012-09-01 Mathieu J. Poirieru8500: Enabling power to MMC device on AB8500 V2
2012-09-01 Mathieu J. Poirieru8500: Moving processor-specific functions to cpu area.
2012-09-01 Mathieu J. Poiriersnowball: applying power to LAN and GBF controllers
2012-09-01 Mathieu J. Poiriersnowball: Adding architecture dependent initialisation
2012-09-01 Mathieu J. Poirieru8500: Moving prcmu to cpu directory
2012-09-01 Mathieu J. Poiriersnowball: Add support for ux500 based snowball board
2012-09-01 Heiko Schocherdavinci: enbw_cmc: change switch init behaviour
2012-09-01 Sughosh Ganuda8xx/hawkboard: Add support for ohci host controller
2012-09-01 Tom Riniam335x evm: Enable support for spi0
2012-09-01 Tom Riniam335x evm: Enable MMC1 pinmux
2012-09-01 Tom Riniam335x evm: Initial support for AM335x GP EVM Profiles
2012-09-01 Otavio Salvadorsc_sps_1: Adjust board config to use 'mxs' SoC code
2012-09-01 Marek VasutMX28: Add SchulerControl SC_SPS_1 platform
2012-09-01 Marek VasutMX28: Move the u-boot.bd info CPUDIR/SOCDIR
2012-09-01 Fabio Estevamvision2: do not overwrite the console
2012-09-01 Fabio Estevammx51evk: do not overwrite the console
2012-09-01 Stefano BabicMX5: mx53loco: do not overwrite the console
2012-09-01 Otavio Salvadormxs: Reowork SPL to use 'mxs' prefix for methods
2012-09-01 Otavio Salvadormxs: prefix register structs with 'mxs' prefix
2012-09-01 Veli-Pekka PeltolaAdd support for Bluegiga APX4 Development Kit
2012-09-01 Markus Hubigat91: Add support for taskit AT91SAM9G20 boards.
2012-09-01 Bo Shenarm : Atmel : add at91sam9x5ek board support
2012-09-01 Enric Balletbò i... OMAP3: fix DRAM size for IGEP-based boards.
2012-09-01 Tom Riniam33xx: Rework pinmux functions
2012-09-01 Tom Riniam33xx: Add support for TI AM335x StarterKit EVM
2012-09-01 Tom Riniam33xx: Remove board/ti/am335x/evm.c
2012-09-01 Javier Martinez... OMAP3: igep00x0: add SPL support for IGEP-based boards
2012-09-01 Javier Martinez... OMAP3: igep00x0: Add config option to choose flash...
2012-09-01 Chandan Natham335x_evm: CPSW support
2012-09-01 Ilya Yanokam335x_evm: read the on-board EEPROM
2012-09-01 Chandan Natham33xx: pin mux defintions for CPSW switch
2012-09-01 Peter Meerwaldbeagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
2012-09-01 Steve Sakomanomap: am335x_evm: enable i2c1 channel
2012-09-01 Peter Meerwaldbeagle: removed unused pr_debug #define
2012-09-01 Peter Meerwaldbeagle: make get_expansion_id(), get_board_revision...
2012-09-01 Lad, Prabhakarda850/omap-l138: Fix NAND flash timings
2012-09-01 Rajashekhara, Sudhakarda850/omap-l138: modifications for Logic PD Rev.3 AM18x...
2012-09-01 Lad, Prabhakarda850/omap-l138: Add MMC support for DA850/OMAP-L138
2012-09-01 Steve Sakomanomap: am335x_evm: remove unused definitions
2012-09-01 Stefano BabicOMAP3: mcx: read hot-water-button after reset
2012-09-01 Stefano BabicOMAP3: mcx: set pinmux for uart4
2012-09-01 Igor Grinbergarm: omap3: cm-t35: minor comment and printf change
2012-09-01 Sughosh Ganuhawkboard/omapl-138: Add support for generating ais...
2012-09-01 Stefan RoeseConsolidate bootcount code into drivers/bootcount
2012-09-01 Anatolij Gustschinmpc52xx: remove o2dnt board
2012-09-01 Anatolij Gustschinmpc52xx: add common o2dnt and o2dnt2 support and config...
2012-08-23 Scott Woodpowerpc/mpc85xx/p1_p2_rdb: add all LAWs during SPL
2012-08-23 Timur Tabipowerpc/85xx: remove support for the Freescale P3060
2012-08-23 Timur Tabipowerpc/85xx: get rid of enum board_slots in P4080...
2012-08-23 Timur Tabipowerpc/85xx: introduce function serdes_device_from_fm_...
next