MX28: Transfer small blocks via PIO in MXS MMC
[platform/kernel/u-boot.git] / board /
2012-09-01 Otavio Salvadormxs: Reowork SPL to use 'mxs' prefix for methods
2012-09-01 Otavio Salvadormxs: prefix register structs with 'mxs' prefix
2012-09-01 Veli-Pekka PeltolaAdd support for Bluegiga APX4 Development Kit
2012-09-01 Markus Hubigat91: Add support for taskit AT91SAM9G20 boards.
2012-09-01 Bo Shenarm : Atmel : add at91sam9x5ek board support
2012-09-01 Enric Balletbò i... OMAP3: fix DRAM size for IGEP-based boards.
2012-09-01 Tom Riniam33xx: Rework pinmux functions
2012-09-01 Tom Riniam33xx: Add support for TI AM335x StarterKit EVM
2012-09-01 Tom Riniam33xx: Remove board/ti/am335x/evm.c
2012-09-01 Javier Martinez... OMAP3: igep00x0: add SPL support for IGEP-based boards
2012-09-01 Javier Martinez... OMAP3: igep00x0: Add config option to choose flash...
2012-09-01 Chandan Natham335x_evm: CPSW support
2012-09-01 Ilya Yanokam335x_evm: read the on-board EEPROM
2012-09-01 Chandan Natham33xx: pin mux defintions for CPSW switch
2012-09-01 Peter Meerwaldbeagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
2012-09-01 Steve Sakomanomap: am335x_evm: enable i2c1 channel
2012-09-01 Peter Meerwaldbeagle: removed unused pr_debug #define
2012-09-01 Peter Meerwaldbeagle: make get_expansion_id(), get_board_revision...
2012-09-01 Lad, Prabhakarda850/omap-l138: Fix NAND flash timings
2012-09-01 Rajashekhara, Sudhakarda850/omap-l138: modifications for Logic PD Rev.3 AM18x...
2012-09-01 Lad, Prabhakarda850/omap-l138: Add MMC support for DA850/OMAP-L138
2012-09-01 Steve Sakomanomap: am335x_evm: remove unused definitions
2012-09-01 Stefano BabicOMAP3: mcx: read hot-water-button after reset
2012-09-01 Stefano BabicOMAP3: mcx: set pinmux for uart4
2012-09-01 Igor Grinbergarm: omap3: cm-t35: minor comment and printf change
2012-09-01 Sughosh Ganuhawkboard/omapl-138: Add support for generating ais...
2012-09-01 Stefan RoeseConsolidate bootcount code into drivers/bootcount
2012-09-01 Anatolij Gustschinmpc52xx: remove o2dnt board
2012-09-01 Anatolij Gustschinmpc52xx: add common o2dnt and o2dnt2 support and config...
2012-08-09 Jens Scharsigrename EB+MCF-EV123 to its current marketing name EB...
2012-08-09 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
2012-08-08 Hongtao Jiapowerpc/sgmii: To support PHY link state auto detect...
2012-08-08 Shaohui Xiepowerpc/p2041: configure the CPLD lane_mux according...
2012-08-08 Timur Tabipowerpc/p1022ds: fix DIU/LBC switching with NAND enabled
2012-08-08 Matthew McClintockpowerpc/p1022ds: add support for SPI and SD boot
2012-07-31 Gerlando Falautopowerpc/82xx: add SDRAM detection for km82xx
2012-07-31 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-i2c
2012-07-31 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-micro...
2012-07-31 Holger Brunckkm/common: remove printfs for i2c deblocking code
2012-07-31 Rajeshwari ShindeCONFIG: SMDK5250: I2C: Enable I2C
2012-07-31 Troy Kiskymx6qsabrelite: add i2c multi-bus support
2012-07-31 Troy Kiskyi.mx: iomux-v3.h: move to imx-common include directory
2012-07-30 Wolfgang DenkMerge branch 'next' of git://git.denx.de/u-boot
2012-07-29 Wolfgang Denkdoc: cleanup - move board READMEs into respective board...
2012-07-22 Wolfgang DenkMinor Coding Style Cleanup.
2012-07-22 Wolfgang DenkBC3450 board: Remove unused CONFIG_SYS_CPU definition
2012-07-22 Wolfgang DenkBC3450 board: change debug code to using debug()
2012-07-20 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-arm
2012-07-20 SRICHARAN RARM: OMAP4: PANDA: Add rest of the USB module pads...
2012-07-20 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-usb
2012-07-20 Wolfgang DenkMerge branch 'sf' of git://git.denx.de/u-boot-blackfin
2012-07-20 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-net
2012-07-18 Wolfgang DenkMerge branch 'next' of git://git.denx.de/u-boot-video
2012-07-12 Wolfgang DenkMerge branch 'next' of git://git.denx.de/u-boot-net...
2012-07-12 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-i2c
2012-07-11 Fabio Estevammx28evk: Add I2C support
2012-07-11 Troy Kiskymx6qsabrelite: add i2c support
2012-07-10 Stephan Linzmicroblaze: Wire up dts configuration
2012-07-10 Wolfgang DenkMinor Coding Style cleanup
2012-07-10 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-arm
2012-07-09 Stephen Warrentegra: trimslice: set up serial flash pinmux
2012-07-09 Stephen Warrentegra: add pin_mux_spi() board initialization function
2012-07-09 Tom Warrentegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build...
2012-07-09 Thierry Redingtegra: Add Tamonten Evaluation Carrier support
2012-07-09 Thierry Redingtegra: Use SD write-protect GPIO on Tamonten
2012-07-09 Thierry Redingtegra: Implement gpio_early_init() on Tamonten
2012-07-09 Thierry Redingtegra: Allow boards to perform early GPIO setup
2012-07-09 Thierry Redingtegra: plutux: Add device tree support
2012-07-09 Thierry Redingtegra: medcom: Add device tree support
2012-07-09 Thierry Redingtegra: Rework Tamonten support
2012-07-09 Peter Meerwaldbeagle: add eeprom expansion board info for bct brettl4
2012-07-09 Michal Simekmicroblaze: Move individual board linker scripts to...
2012-07-08 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-arm
2012-07-08 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
2012-07-07 esw@bus-elektronik.deadd new board vl_ma2sc
2012-07-07 Stefan RoeseSPL: ARM: spear: Remove some objects from SPL build
2012-07-07 Shiraz HashimSPEAr: Enable dcache for fast file transfer
2012-07-07 Amit VirdiSPEAr: Initialize SNOR in early_board_init_f
2012-07-07 Vipin KUMARSPEAr: Add configuration options for spear3xx and spear...
2012-07-07 Vipin KumarSPEAr: Add interface information in initialization
2012-07-07 Vipin KUMARSPEAr: Add macb driver support for spear310 and spear320
2012-07-07 Vipin KUMARSPEAr: Configure network support for spear SoCs
2012-07-07 Vipin KUMARSPEAr: Place ethaddr write and read within CONFIG_CMD_NET
2012-07-07 Amit VirdiSPEAr: Eliminate dependency on Xloader table
2012-07-07 Amit VirdiSPEAr: Fix ARM relocation support
2012-07-07 Vipin KUMARSPEAr: Configure FSMC driver for NAND interface
2012-07-07 Holger Brunckarm/km: remove calls to kw_gpio_* in board_early_init_f
2012-07-07 Thomas Herzmannarm/km: add implementation for read_dip_switch
2012-07-07 Valentin Longchamparm/km: support the 2 PCIe fpga resets
2012-07-07 Valentin Longchamparm/km: skip FPGA config when already configured
2012-07-07 Valentin Longchamparm/km: redefine piggy 4 reg names to avoid conflicts
2012-07-07 Valentin Longchamparm/km: enable BOCO2 FPGA download support
2012-07-07 Holger Brunckarm/km: remove portl2.h and use km_kirkwood instead
2012-07-07 Holger Brunckarm/km: convert mgcoge3un target to km_kirkwood
2012-07-07 Holger Brunckarm/km: add kmcoge5un board support
2012-07-07 Holger Brunckarm/km: add kmnusa board support
2012-07-07 SRICHARAN RARM: OMAP4/5: Move USB pads to essential list.
2012-07-07 Marek VasutKirkwood: Add support for Ka-Ro TK71
2012-07-07 Valentin Longchamparm/km: use spi claim bus to switch between SPI and...
2012-07-07 Simon GuinotARM: don't probe PHY address for LaCie boards
next