mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio could be used
[platform/kernel/u-boot.git] / board /
2013-03-24 Tom Riniam335x_evm: Add better timings for the new BeagleBoard...
2013-03-24 Matt Porterti814x_evm: add ti814x evm board support
2013-03-24 Matt Porteram33xx: refactor emif4/ddr to support multiple EMIF...
2013-03-24 Matt Porteram33xx: convert defines from am33xx-specific to generic...
2013-03-24 Vaibhav Hirematham335x: Enable DDR PHY dynamic power down bit for DDR3...
2013-03-22 Nikita Kiryanovcm-t35: add support for loading splash image from NAND
2013-03-20 Stephen WarrenARM: rpi_b: enable SD controller, add related env/cmds
2013-03-20 Stephen WarrenARM: rpi_b: use bcm2835 mbox driver to get memory size
2013-03-18 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-usb
2013-03-18 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arm
2013-03-18 Lukasz Majewskiarm:trats: Use new ums command
2013-03-15 Simon Glassarm: Use sections header to obtain link symbols
2013-03-15 Simon GlassReplace __bss_end__ with __bss_end
2013-03-15 Albert ARIBAUDMerge branch 'u-boot-tegra/master' into 'u-boot-arm...
2013-03-15 Albert ARIBAUDMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
2013-03-15 fabio.estevam@free... nitrogen: Use unsigned long to specify the total RAM...
2013-03-14 Tom WarrenTegra114: Dalmore: Add pad config tables/code based...
2013-03-14 Tom WarrenTegra114: fdt: Move aliases from dtsi to dts file as...
2013-03-14 Tom WarrenTegra114: Dalmore: Always use DEFAULT instead of DISABL...
2013-03-14 Tom WarrenTegra30: MMC: Add SD bus power-rail and SDMMC pad init...
2013-03-14 Tom WarrenTegra30: fdt: Add SDMMC (sdhci) nodes for T30 boards...
2013-03-14 Tom WarrenTegra30: Cardhu: Add pad config tables/code based on...
2013-03-14 Tom WarrenTegra114: pinmux: Update pinmux tables & code, fix...
2013-03-14 Tom WarrenTegra30: Cardhu: Remove unneeded cardhu.c.mmc file
2013-03-14 Tom WarrenTegra30: fdt: Sync DT nodes with kernel DT files (I2C...
2013-03-14 Tom WarrenTegra: fdt: Remove memreserve line from Cardhu/Seaboard...
2013-03-14 Tom WarrenTegra: MMC: Add DT support to MMC driver for all T20...
2013-03-14 Tom WarrenTegra: fdt: Add/enhance sdhci (mmc) nodes for all T20...
2013-03-14 Tom WarrenTegra: fdt: tamonten: Add common tamonten.dtsi file...
2013-03-14 Tom WarrenTegra: fdt: Change /include/ to #include for C preprocessor
2013-03-14 Tom WarrenTegra114: fdt: Update DT files with I2C info for T114...
2013-03-14 Lucas Stachtegra: usb: move implementation into right directory
2013-03-13 Eric NelsonAdd Boundary Devices Nitrogen6X boards
2013-03-12 Albert ARIBAUDRefactor linker-generated arrays
2013-03-12 Albert ARIBAUDarm: make __bss_start and __bss_end__ compiler-generated
2013-03-12 Albert ARIBAUDRemove linker lists (LGAs) from SPL linker scripts
2013-03-12 Albert ARIBAUDMerge branch 'u-boot-atmel/master' into 'u-boot-arm...
2013-03-11 Stefan Roeseppc: Remove PCIPPC2 and PCIPPC6 boards
2013-03-11 Tom RiniMerge u-boot/master into u-boot-ti/master
2013-03-11 Lokesh Vutlaarm: dra7xx: Add board files for DRA7XX socs
2013-03-10 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-mpc82xx
2013-03-09 Holger Brunckpowerpc/82xx/km: removed unneeded ifdef
2013-03-09 Holger Brunckpowerpc/82xx/km: make handle_mgcoge3un_reset static
2013-03-09 Anatolij Gustschinmpc512x: pdm360ng: drop not needed memory node fixup
2013-03-09 Anatolij Gustschinmpc512x: add ifm ac14xx board
2013-03-09 Anatolij Gustschinmpc512x: use common code for clock setting for all...
2013-03-09 Anatolij Gustschinmpc512x: use common code for CSx configuration
2013-03-09 Stefan Roesempc5200: a4m2k: Implement custom "dynamic" watchdog...
2013-03-09 Stefan Roesempc5200: Add a4m2k board port
2013-03-08 Nikita Kiryanovcm-t35: add support for user defined lcd parameters
2013-03-08 Nikita Kiryanovcm-t35: add support for dvi displays
2013-03-08 Nikita Kiryanovomap3: allow dynamic selection of gfx_format
2013-03-08 Nikita Kiryanovomap_hsmmc: add driver check for write protection
2013-03-08 Nikita Kiryanovcm-t35: implement board specific card detect check
2013-03-08 Nikita Kiryanovomap_hsmmc: implement driver check for card detection
2013-03-08 Tom Riniam335x_evm: Add am335x_evm_usbspl build target
2013-03-07 Otavio Salvadormx23_olinuxino: Fix warning for implicit declaration
2013-03-07 Fabio Estevammx6: Provide a structure for accessing HDMI registers
2013-03-07 Otavio Salvadormx23_olinuxino: Enable USB support
2013-03-07 Otavio Salvadormx23_olinuxino: Add support for status LED
2013-03-07 Otavio Salvadormx23evk: Adjust DRAM control register to use full 128MB...
2013-03-07 Marek Vasutmxs: m28: Enable power to USB port 0
2013-03-07 Eric Nelsoni.MX6: consolidate pad names for multi-CPU boards
2013-03-07 Eric Nelsoni.MX6: mx6qsabrelite: indent with tabs
2013-03-05 Stefano BabicMerge branch 'master' of git://git.denx.de/u-boot-arm
2013-03-04 Simon Glassx86: Adjust link device tree include file
2013-03-04 Tom RiniMerge branch 'mem' of git://git.denx.de/u-boot-x86
2013-03-04 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-blackfin
2013-03-04 Sonic Zhangblackfin: bf60x: add board and headers files to support...
2013-03-01 Stefano BabicOMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define
2013-02-28 Wolfgang DenkARM: ns9750dev: remove remainders of dead board
2013-02-23 Stefano BabicMerge branch 'master' of git://git.denx.de/u-boot-arm
2013-02-21 Albert ARIBAUDMerge branch 'u-boot-ti/master' into 'u-boot-arm/master'
2013-02-21 Albert ARIBAUDMerge 'u-boot-microblaze/mainline/arm' into 'u-boot...
2013-02-19 Bo ShenARM: atmel: add at91sam9g20ek_2mmc nand boot support
2013-02-18 Michael Jonesomap3: mvblx: pass FPGA version to the kernel
2013-02-18 Michael Jonesomap3: mvblx: select fpgafilename according to orientation
2013-02-18 Enric Balletbo i... OMAP3: igep00x0: Add new IGEP COM PROTON.
2013-02-18 Enric Balletbo i... OMAP3: igep00x0: use official board names.
2013-02-18 Ilya Yanokam335x_evm: enable support for booting via USB
2013-02-18 Lars Poeschelam33xx: pcm051: Remove wp pin mux for sd-card
2013-02-18 robertcnelson@gmai... beagle: expansion boards: add LSR COM6L adapter
2013-02-18 robertcnelson@gmai... beagle: expansion boards: retry i2c_read with 16bit...
2013-02-18 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-mpc83xx
2013-02-15 Holger Brunckpowerpc/83xx/km: drop uneeded dtt_bus environment var
2013-02-15 Andreas Huberkm/scripts: replace hardcoded uImage
2013-02-15 Karlheinz Jergpowerpc/83xx/km: add MV88E6122 switch support for kmvect1
2013-02-15 Holger Brunckkm/common/ivm: rework piggy mac adress offset generation
2013-02-15 Karlheinz Jergkm82xx, km83xx: move ethernet_present() from common...
2013-02-15 Holger Brunckkm/common/ivm: remove CONFIG_SYS_I2C_IVM_BUS related...
2013-02-15 Holger Brunckkm/common/ivm: remove obsolete code
2013-02-15 Holger Brunckkm/common: remove unneeded ifdefs for I2C
2013-02-15 Kim PhillipsMerge branch 'master' of git://git.denx.de/u-boot
2013-02-15 Tom RiniMerge branch 'fixes' of git://git.denx.de/u-boot-mips
2013-02-15 Simon Glassx86: Remove eNET boards
2013-02-13 Tom RiniMerge branch 'next' of git://git.denx.de/u-boot-mips
2013-02-12 Tom Riniam335x_evm: Fix CPSW ethernet on GP EVM and EVM-SK
2013-02-12 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arm
2013-02-12 Benoît Thébaudeauimx: mx6q DDR3 init: Benefit from available CL = 7
2013-02-12 Benoît Thébaudeauimx: mx6q DDR3 init: Fix MR0.PPD
next