sniper: Serial number support, obtained from die ID
[platform/kernel/u-boot.git] / board /
2015-08-13 Paul Kocialkowskisniper: Serial number support, obtained from die ID
2015-08-13 Paul Kocialkowskisniper: OMAP3 reboot mode support
2015-08-13 Paul KocialkowskiLG Optimus Black (P970) codename sniper support
2015-08-13 Vladimir Zapolskiylpc32xx: devkit3250: add spl build support
2015-08-13 Vladimir Zapolskiylpc32xx: devkit3250: update of board configuration
2015-08-13 Jiandong Zhengarm: bcmcygnus: Enable Ethernet support
2015-08-13 Heiko Schocherarm, at91: support for sam9260 based smartweb board
2015-08-12 Rob HerringARM: highbank: remove DRAM bank setup
2015-08-12 Peng Fanfsl: common: pfuze: no use original pfuze code if DM_PMIC
2015-08-10 Tom RiniMerge git://git.denx.de/u-boot-dm
2015-08-09 Tom RiniMerge branch 'master' of git.denx.de/u-boot-sunxi
2015-08-08 Hans de Goedesunxi: display: Add composite video out support
2015-08-08 Karol Gugalasunxi: nand: Add pinmux and clock settings for NAND...
2015-08-08 Dinh Nguyenddr: altera: sequencer: add RW_MGR_MEM_NUMBER_OF_RANKS
2015-08-08 Marek Vasutddr: altera: sequencer: Wrap misc remaining macros
2015-08-08 Marek Vasutddr: altera: sequencer: Wrap IO_* macros
2015-08-08 Marek Vasutddr: altera: sequencer: Wrap RW_MGR_* macros
2015-08-08 Marek Vasutddr: altera: sequencer: Wrap ac_rom_init and inst_rom_init
2015-08-08 Marek Vasutddr: altera: sequencer: Move qts-generated files to...
2015-08-08 Marek Vasutddr: altera: sdram: Introduce socfpga_sdram_get_config()
2015-08-08 Marek Vasutarm: socfpga: system: Clean up pinmux_config.c
2015-08-08 Marek Vasutarm: socfpga: scan: Zap iocsr_scan_chain*_table()
2015-08-08 Marek Vasutarm: socfpga: clock: Clean up pll_config.h
2015-08-08 Marek Vasutarm: socfpga: Move sdram_config.h to board dir
2015-08-08 Marek Vasutarm: socfpga: Move generated files into qts subdir
2015-08-06 Tom RiniMerge git://git.denx.de/u-boot-dm
2015-08-06 Stephen WarrenARM: tegra: Add p2371-0000 board
2015-08-06 Stephen WarrenARM: tegra: Add e2220-1170 board
2015-08-06 Alexandre CourbotARM: tegra: enable GPU DT node when appropriate
2015-08-06 Stephen WarrenARM: tegra: add comment re: autogeneration to pinmux...
2015-08-06 Simon Glassexynos: Add support for spring
2015-08-06 Simon Glassexynos: Drop old exynos5250-specific board code
2015-08-06 Simon Glassexynos: Drop old exynos5420-specific board code
2015-08-06 Simon Glassexynos: Remove unneeded device tree control #ifdefs
2015-08-06 Simon Glassexynos: Enable new features for exynos5 boards
2015-08-06 Simon Glassexynos: Add common board code for exynos5 boards that...
2015-08-05 Tom WarrenT210: P2571: Turn CPU fan on
2015-08-05 Tom WarrenT210: P2571: Enable SD-card power via PMIC LDO2
2015-08-05 Tom RiniMerge git://git.denx.de/u-boot-x86
2015-08-05 Hans de Goedesunxi: Drop our own copy of the USB_KEYBOARD options
2015-08-05 Paul Kocialkowskisunxi: usb: USB_MUSB_SUNXI move to musb-new Kconfig
2015-08-05 Paul Kocialkowskiusb: musb-new: CONFIG_MUSB prefix replacement with...
2015-08-05 Simon Glassx86: qemu: Support operation as an EFI payload
2015-08-05 Simon Glassx86: baytrail: Support operation as an EFI payload
2015-08-05 Ben Stoltzx86: Add EFI board code
2015-08-05 Bin Mengx86: Add Intel Bayley Bay board support
2015-08-05 Bin Mengx86: minnowmax: Remove smsc47x superio codes
2015-08-04 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-fsl...
2015-08-03 Alison Wangarmv7/ls1021a: allow OCRAM access permission as R/W...
2015-08-03 chenhui zhaoarmv7/ls1021atwr: program the regulator for deep sleep
2015-08-03 Tang Yuantianarmv7/ls1021atwr: added deep sleep support in uboot
2015-08-02 Tom RiniMerge branch 'master' of git://denx.de/git/u-boot-imx
2015-08-02 Peng Fanimx: mx6ul_14x14_evk add basic board support
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: setup hdmi only on hdmi enable
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: add support for displaytype env var
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: make it possible to not init display
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: map HDMI to IPU1 DI0 explicitly
2015-08-02 Peng Fanimx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board...
2015-08-02 Peng Fanimx: mx6sabresd/sabreauto runtime setting fdt_file
2015-08-01 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
2015-07-31 Priyanka Jainpowerpc/T104xRDB: Remove vbank check redundant code
2015-07-31 Shengzhou Liupowerpc/t1023rdb: eMMC boot without external SD card
2015-07-31 Shengzhou Liupowerpc/t1023rdb: add support for T1023RDB RevC
2015-07-31 Aneesh Bansalpowerpc/mpc85xx: SECURE BOOT- NAND secure boot target...
2015-07-31 Aneesh Bansalpowerpc/mpc85xx: SECURE BOOT- NAND secure boot target...
2015-07-29 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-tegra
2015-07-28 Priyanka Jainpowerpc/t104x, t102x: Update CPC debug register value...
2015-07-28 Shaohui Xiepowerpc/t4rdb: fix cpld reset altbank
2015-07-28 Ying Zhangpowerpc/p2020rdb: fix the FDT_ERR_NOTFOUND issue
2015-07-28 gaurav ranapowerpc/T104xD4: Add Secure boot support for T104xD4RDB...
2015-07-28 Priyanka Jainpowerpc/T104xD4RDB: Add T104xD4RDB boards support
2015-07-28 Tom WarrenT210: Add support for 64-bit T210-based P2571 board
2015-07-28 Tom RiniMerge branch 'zynq' of git://denx.de/git/u-boot-microblaze
2015-07-28 Michal Simekzynq: Fix typo in Makefile about custom ps7_init file
2015-07-28 Michal Simekzynqmp: Show EL level where U-Boot runs
2015-07-28 Michal SimekARM: zynqmp: Wire up SATA for the board
2015-07-28 Michal SimekARM: zynqmp: Wire up ethernet controllers
2015-07-28 Siva Durga Prasad... zynqmp: Define ep config for ZynqMP
2015-07-28 Siva Durga Prasad... zynqmp: Kconfig: Move zynqmp Kconfig
2015-07-27 Simon Glasstegra: nyan-big: Allow TPM on I2C
2015-07-27 Nishanth Menonboard: ks2_evm: get rid of bogus CONFIG_LINUX_BOOT_PARA...
2015-07-27 Antonio Borneostm32f429: pass the device unique ID in DTB
2015-07-27 Masahiro YamadaKill unneeded #include <linux/kconfig.h>
2015-07-27 Nishanth Menonboard: ks2: README: fix typos
2015-07-27 Paul Kocialkowskiomap-common: Common boot code OMAP3 support and cleanup
2015-07-26 Otavio Salvadorcgtqmx6eval: Align DCD settings with Congatec's U-boot
2015-07-26 Otavio Salvadorcgtqmx6eval: Add SATA support
2015-07-26 Otavio Salvadorcgtqmx6eval: Add splash screen support
2015-07-26 Otavio Salvadorcgtqmx6eval: Add USB support
2015-07-26 Otavio Salvadorcgtqmx6eval: Add PMIC support
2015-07-26 Otavio Salvadorcgtqmx6eval: Add ESDHC3 support
2015-07-26 Otavio Salvadorcgtqmx6eval: Fit into single lines
2015-07-26 Otavio Salvadorcgtqmx6eval: Improve the error handling
2015-07-26 Otavio Salvadorcgtqmx6eval: Staticize when possible
2015-07-26 Fabio Estevammx6sxsabresd: Use 'int' for return values
2015-07-26 Fabio Estevammx6sabresd: Use 'int' for return values
2015-07-26 Fabio Estevamwarp: Add MAX77696 support
2015-07-26 Stefan Roesearm: mx6: tqma6: Add WRU-IV baseboard for the TQMa6 SoM
2015-07-25 Tom RiniMerge branch 'master' of git.denx.de/u-boot-sunxi
2015-07-25 Hans de Goedesunxi: musb: Move musb config and platdata to the sunxi...
next