nitrogen6x: Move setup_sata to common part
[platform/kernel/u-boot.git] / board /
2013-12-17 Giuseppe Paganonitrogen6x: Move setup_sata to common part
2013-12-17 Eric Nelsoni.MX6 (DQ/DLS): use macros for mux and pad declarations
2013-12-17 Fabio Estevamimx: Explicitly pass the I2C bus number in pmic_init()
2013-11-28 Giuseppe Paganoudoo: Fix watchdog during kernel boot.
2013-11-28 Giuseppe Paganoudoo: Add ethernet support (FEC + Micrel KSZ9031).
2013-11-28 Giuseppe Paganoudoo: Move and optimize platform register setting.
2013-11-28 Fabio Estevammx6sabresd: Add SPI NOR support
2013-11-28 Fabio Estevammx6sabresd: Fix wrong colors in LVDS splash
2013-11-27 Fabio Estevamefikamx: Fix pmic_init() argument
2013-11-27 Fabio Estevammx31pdk: Fix pmic_init() argument
2013-11-27 Fabio Estevammx51evk: Fix pmic_init() argument
2013-11-13 Eric Nelsoni.MX6DQ/DLS: replace pad names with their Linux kernel...
2013-11-13 Stefan Roesemx6: titanium: Move BSP code to barco board directory
2013-11-13 Fabio Estevamtitanium: Return the error when cpu_eth_init() fails
2013-11-13 Fabio Estevamwandboard: Return the error when cpu_eth_init() fails
2013-11-13 Fabio Estevamwandboard: Return the error immediately when ipuv3_fb_i...
2013-11-12 Samuel Egliarm, am335x: update for the siemens boards
2013-11-11 Tom Riniomap730p2: Remove board
2013-11-11 Igor Grinbergcm-t35: use gpio_led driver for status led
2013-11-09 Albert ARIBAUDMerge branch 'iu-boot/master' into 'u-boot-arm/master'
2013-11-08 Tom RiniMerge branch 'master' of git://denx.de/git/u-boot-usb
2013-11-08 Rob Herringsandbox: convert to common time functions
2013-11-08 Masahiro Yamadainclude: delete include/linux/config.h
2013-11-08 Przemyslaw Marczakusb: ums: move ums code from trats to Samsung common...
2013-11-08 Przemyslaw Marczakusb: ums: fix disk capacity miscalculation and code...
2013-11-08 Przemyslaw Marczakusb: ums: code refactoring to improve reusability on...
2013-11-08 Masahiro Yamadacosmetic: remove empty lines at the top of file
2013-11-08 Masahiro YamadaEP88x: remove remainders of dead board
2013-11-08 Masahiro Yamadakup: Delete an unused Makefile
2013-11-07 Albert ARIBAUDMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
2013-11-06 Tom RiniMerge branch 'master' of git://denx.de/git/u-boot-coldfire
2013-11-06 Tom RiniMerge branch 'fpga' of git://denx.de/git/u-boot-microblaze
2013-11-06 Masahiro Yamadafreescale: p1_p2_rdb_pc: rename COBJS-y to obj-y
2013-11-05 Albert ARIBAUDMerge branch 'u-boot-atmel/master' into 'u-boot-arm...
2013-11-04 Bo Shenarm: atmel: at91sam9n12ek: add usb host support
2013-11-04 Rob HerringARM: vexpress: convert to common timer code
2013-11-04 Rob Herringconfig: Add a default CONFIG_SYS_PROMPT
2013-11-04 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-blackfin
2013-11-04 Fabio Estevamwandboard: README: Include the quad version
2013-11-01 Nikita Kiryanovcm_t35: update lcd predefines
2013-11-01 Tom Riniam335x: Enable CONFIG_OMAP_WATCHDOG support
2013-11-01 Igor Grinbergcm-t35: move the display code to common place
2013-11-01 Igor Grinbergcm-t35: move the eeprom code to common place
2013-11-01 Andreas Bießmanntricorder: support 256MiB SDRAM on revision > D
2013-11-01 Andreas Bießmanntricorder: add led support
2013-11-01 Andreas Bießmanntricorder: panic() on unknown board
2013-11-01 Andreas Bießmanntricorder: add tricordereeprom command
2013-11-01 Heiko Schocherarm, da85x: update for the ipam390 board
2013-11-01 Tom Riniam33xx, davinci: Create and use <asm/davinci_rtc.h>
2013-11-01 Tom Riniboard/keymile/kmp204x/Makefile: Convert to SPDX tag
2013-11-01 Tom Riniboard: powerpc: convert more makefiles to Kbuild style
2013-11-01 Masahiro YamadaMakefile: convert makefiles to Kbuild style and delete...
2013-11-01 Masahiro Yamadaboard: powerpc: convert makefiles to Kbuild style
2013-11-01 Masahiro Yamadaboard: arm: convert makefiles to Kbuild style
2013-11-01 Masahiro Yamadablackfin: convert makefiles to Kbuild style
2013-11-01 Masahiro Yamadam68k: convert makefiles to Kbuild style
2013-11-01 Masahiro Yamadax86: convert makefiles to Kbuild style
2013-11-01 Masahiro Yamadanios2: convert makefiles to Kbuild style
2013-11-01 Masahiro Yamadands32: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadamips: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadamicroblaze: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadaopenrisc: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadaavr32: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadash: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadasparc: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadadrivers: move some drivers to drivers/Makefile
2013-10-31 Masahiro Yamadaboard: ti: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadasandbox: convert makefiles to Kbuild style
2013-10-31 Eric Nelsoni.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt
2013-10-31 Christoph G. BaumannARM: mxs: Configure 2 Gbit DDR2 RAM for BG0900
2013-10-30 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-video
2013-10-24 Valentin Longchampmpc85xx: introduce the kmp204x reference design support
2013-10-24 Valentin Longchampfsl/mpc85xx: define common serdes_clock_to_string function
2013-10-24 Valentin LongchampKM: add CONFIG_KM_COMMON_ETH_INIT for km common eth...
2013-10-24 Valentin LongchampKM: define CONFIG_SYS_I2C_INIT_BOARD only for concerned...
2013-10-24 Po Liupowerpc/c29xpcie: add DDR ECC on off config setting
2013-10-22 Troy Kiskyusb: rename board_usb_init_type to usb_init_type
2013-10-22 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-sh
2013-10-21 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-usb
2013-10-20 Troy Kiskyusb: ehci-hcd: add enum usb_init_type parameter to...
2013-10-20 Troy Kiskyusb: add enum usb_init_type parameter to usb_lowlevel_init
2013-10-20 Troy Kiskyusb: rename board_usb_init_type to usb_init_type
2013-10-20 Dan MurphyARM: omap5-evm: Move MAC creation to misc_init
2013-10-20 Dan Murphyusb: dra7xx: Add support for dra7xx xhci USB host
2013-10-20 Dan Murphyusb: omap5: Update the board_usb_init api
2013-10-20 Lukasz Majewskisamsung:common:thor: Define common Samsung code to...
2013-10-20 Lukasz Majewskiusb:g_dnl: Add name parameter to g_dnl_bind_fixup function
2013-10-20 Mateusz Zalegausb: new board-specific USB init interface
2013-10-20 Troy Kiskynitrogen6x: add otg usb host/device mode support
2013-10-20 Troy Kiskymx6: iomux: add GPR1 defines for use with nitrogen6x
2013-10-20 Dan MurphyOMAP5-uevm: USB: Add xHCI host contoller support
2013-10-20 Julius Wernerexynos: dts: Add USB VBUS GPIOs to the device tree
2013-10-20 Julius Wernerexynos: usb: Switch USB VBUS GPIOs to be device tree...
2013-10-17 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-i2c
2013-10-17 Marek VasutARM: mxs: Add PPC-AG BG0900 board
2013-10-17 Fabio Estevamudoo: Add initial support for mx6q udoo board
2013-10-17 Stefan Roesearm: Remove IXP425 boards pdnb3 and scpu
2013-10-16 Prabhakar Kushwahaboards/c29xpcie: Update TLB and LAW size for IFC NAND...
2013-10-16 Shengzhou Liupowerpc/p1010rdb: add p1010rdb-pb support with updating...
2013-10-16 Shengzhou Liuboard/p1010rdb: add pin mux and sdhc support in any...
next