ARM64: configs: tizen_bcmrpi3_defconfig: Sync with savedefconfig
[platform/kernel/linux-rpi.git] / arch / arm /
2020-07-06 Seung-Woo KimARM: tizen_bcm2709_defconfig: enable ZC3XX camera module
2020-07-06 Hoegeun KwonARM: tizen_bcm2709_defconfig: Disable unused modules...
2020-07-06 Hoegeun KwonARM: tizen_bcm2709_defconfig: Disable FB_BCM2708
2020-07-06 Jaechul LeeARM64: dts: bcm2710-rpi-3-b: Changes GPIO26 to GPIO25...
2020-07-06 Jaehoon ChungARM: config: tizen_bcm2709: update defconfig file
2020-07-06 Jaechul LeeARM: tizen_bcm2709_defconfig: Removes unnecessary modules
2020-07-06 Jaechul LeeARM64: dts: bcm2710-rpi-3-b: Adds respeaker 4mic nodes
2020-07-06 Jaechul LeeARM64: config: tizen_bcmrpi3: Adds configures related...
2020-07-06 Seung-Woo KimARM: tizen_bcm2709_defconfig: Add CONFIG_KEYBOARD_GPIO
2020-07-06 Seung-Woo KimARM: tizen_bcm2709_defconfig: Enable modules for usb...
2020-07-06 Jaechul LeeARM64: dts: bcm2710-rpi-3-b: Adds buttons for speaker...
2020-07-06 Seung-Woo KimARM: tizen_bcm2709_defconfig: enable TUN for openvpn
2020-07-06 Seung-Woo KimARM: tizen_bcm2709_defconfig: enable UNWINDER_ARM
2020-07-06 Seung-Woo KimARM: tizen_bcm2709_defconfig: disable unnecessary senso...
2020-07-06 Hoegeun KwonARM: dts: bcm283x: Fix the priority of pixelvalve0...
2020-07-06 Hoegeun KwonARM: dts: bcm2710-rpi-3-b-plus: Add DT support for...
2020-07-06 Seung-Woo KimARM: dts: bcm2710-rpi-3-b-plus: Enable dt nodes for...
2020-07-06 Seung-Woo KimARM: dts: bcm2710-rpi-3-b-plus: Add reserved memory...
2020-07-06 Hoegeun KwonARM: dts: Add support for drm vc4 on RPI3 b plus
2020-07-06 Seung-Woo KimARM: tizen_bcm2709_defconfig: sync rtl8192cu vendor...
2020-07-06 Seung-Woo KimARM: tizen_bcm2709_defconfig: enable IP_NF_RAW
2020-07-06 Seung-Woo KimARM: tizen_bcm2709_defconfig: enable MPTCP
2020-07-06 Seung-Woo KimARM: tizen_bcm2709_defconfig: enable NETFILTER_XT_TARGE...
2020-07-06 Inki Daearm: tizen_bcm2709_defconfig: enable sync file validati...
2020-07-06 Seung-Woo KimARM: configs: add tizen_bcm2709_defconfig
2020-07-06 Seung-Woo KimARM: dts: bcm2809-rpi-2-b: enable display, touch, audio...
2020-07-06 egukimARM64: dts: bcm2710-rpi-3-b : add memory reserve
2020-07-06 egukimARM64: dts: bcm2710: add psci device node
2020-07-06 egukimARM64: dts: rpi3: Add optee node
2020-07-06 KwangCheol LeeARM64: dts: bcm2710-rpi-3-b: add DT support for DRM...
2020-07-06 Eric AnholtBCM270X: Enable the DSI panel node in the VC4 overlay.
2020-07-06 Inki DaeARM: dts: bcm2710-rpi-3-b: enable spi0 device node
2020-07-06 Lee HackseungARM: dts: bcm2710-rpi-3-b : Change audio node status...
2020-07-06 Andi ShytiARM64: dts: bcm2710-rpi-3-b: enable i2c1
2020-07-06 Hoegeun Kwonarm: dts: Add support for drm vc4 on RPI3
2020-07-04 Phil Elwelloverlays: rpi-ft5406: Fix boolean parameters
2020-07-04 Dave Stevensondtoverlays: Fixup imx219 and imx477 overlays due to...
2020-07-03 Dave Stevensondt: Use rpi-firmware-kms-2711 on 2711 platforms
2020-07-02 Phil Elwelloverlays: Fix miniuart-bt "krnbt" parameter
2020-07-01 Maxim MikityanskiyARM: dts: Add Bluetooth nodes for Raspberry Pi
2020-07-01 Maxim Mikityanskiyconfig: Set CONFIG_SERIAL_DEV_CTRL_TTYPORT=y in Raspber...
2020-07-01 Dave Stevensondefconfig: Add Sony IMX290 image sensor driver to all...
2020-07-01 Dave Stevensondtoverlays: Add an overlay for the Sony IMX290 image...
2020-07-01 Dave Stevensondt/dtoverlays: Fix up base DT and overlays for updated...
2020-07-01 Phil ElwellARM: dts: Set brcm,enable-l1ss for CM4
2020-07-01 Phil ElwellARM: dts: Add bcm2711-rpi-cm4.dts
2020-07-01 Phil ElwellSQUASH: dts: Fix firmware clocks support
2020-07-01 Maxime Ripardclk: rpi: Adjust DT binding to match upstream
2020-07-01 Phil Elwelloverlays: Update upstream overlays after vc4-kms-v3d...
2020-07-01 Phil Elwelloverlays: i2c-gpio: Avoid open-drain warnings
2020-07-01 Phil ElwellRevert "overlays: gpio-keys: Avoid open-drain warnings"
2020-07-01 Hristo Venevsnd_bcm2835: disable HDMI audio when vc4 is used (...
2020-07-01 Phil Elwellconfigs: Add SND_SOC_MAX98357A=m
2020-07-01 Kevin P. FlemingAdd Micro Crystal RV-1805 to i2c-rtc overlays
2020-07-01 Phil Elwelloverlays: i2c-rtc-gpio: Fix trickle-resistor-ohms param
2020-07-01 bjornoverlays: Add spi0 overlay to support sc16is752
2020-07-01 Pali Rohároverlays: gpio-shutdown: Add information for Raspberry...
2020-07-01 Pali Rohároverlays: gpio-shutdown: Add information for SysV init...
2020-07-01 Phil Elwelloverlays: i2c-rtc: Fix trickle-resistor-ohms param
2020-07-01 Chen-Yu Tsaiconfigs: Build HWMON core into kernel
2020-07-01 Chen-Yu Tsaiconfigs: Switch to upstream thermal sensor for RPi...
2020-07-01 Chen-Yu TsaiARM: dts: bcm2711-rpi: Remove downstream thermal sensor...
2020-07-01 Stefan WahrenARM: configs: Build BCM2711 thermal as module
2020-07-01 Stefan WahrenARM: dts: bcm2711: Enable thermal
2020-07-01 Phil ElwellARM: dts: Update for new VCHIQ BCM2711 DMA support
2020-07-01 Phil Elwellconfigs: Add ZSWAP=y, ZBUD=m, Z3FOLD=m
2020-07-01 Phil Elwelloverlays: Fix audio parameter of vc4-kms-v3d
2020-07-01 Phil Elwellconfigs: Restore missing NF_TABLES settings
2020-07-01 Phil Elwellconfigs: Use the upstream cpufreq driver
2020-07-01 Phil Elwellconfigs: Include the firmware-clocks driver
2020-07-01 Phil ElwellARM: dts: Enable firmware-clocks on all Pis
2020-07-01 Dave Stevensondefconfig: Add CMA and system dma-heaps to the config
2020-07-01 Naushir Patuckconfigs: Add imx477 sensor driver to all Raspberry...
2020-07-01 Naushir Patuckdtoverlays: Add IMX477 sensor overlay
2020-07-01 Phil Elwellraspberrypi: dts: Switch to discrete ALSA devices
2020-07-01 Phil Elwelloverlays: Move "fixed-clock" nodes to the root
2020-07-01 Phil Elwelloverlays: tc358743: Use intra-overlay fragments
2020-07-01 Dom Cobleyconfig: Enable CONFIG_DRM_VC4_HDMI_CEC
2020-07-01 Dom Cobleyvc4_hdmi_regs: Add Intr2 register block
2020-07-01 Phil Elwelloverlays: sc16is752-spi1: Add xtal parameter
2020-07-01 Phil Elwelloverlays: Make use of intra-overlay fragments
2020-07-01 Phil Elwellconfigs: Add missing TOUCHSCREEN_RASPBERRYPI_FW=m
2020-07-01 Phil Elwelloverlays: gpio-keys: Avoid open-drain warnings
2020-07-01 Phil Elwelloverlays: Make the i2c-gpio overlay safe again
2020-07-01 Phil ElwellARM: dts: bcm2711: Allow 40-bit DMA for SPI
2020-07-01 popcornmixconfigs: Enable CONFIG_DRM_VC4_HDMI_CEC
2020-07-01 Naushir Patuckconfigs: Add VIDEO_ISP_BCM2835 to all Pi defconfigs
2020-07-01 Phil Elwelloverlays: rpivid-v4l2 also needs size-cells = 2
2020-07-01 Hristo Venevdts: bcm2711: add "High Peripheral" mode overlay
2020-07-01 Hristo Venevdts: bcm2711: set #size-cells = <2>
2020-07-01 Phil ElwellARM: dts: Create bcm2708-rpi-b-rev1.dts
2020-07-01 Dave Stevensondt: Update all mainline bcm283x dt files for i2c0 pinct...
2020-07-01 Dave Stevensondtoverlays: Update CSI overlays to use i2c_csi_dsi
2020-07-01 Dave Stevensondt: Implement an I2C pinctrl mux for BSC0.
2020-07-01 Dave Stevensondefconfig: Enable I2C_MUX_PINCTRL in all Pi configs
2020-07-01 Phil Elwelldts: bcm2711: EMMC2 can address the whole first GB
2020-07-01 Naushir Patuckdefconfig: Add bcm2835-unicam to platform defconfigs.
2020-07-01 Phil Elwelldts: bcm2711: Move emmc2 to its own "bus"
2020-07-01 Phil ElwellARM: dts: Extend SCB bus address range
2020-07-01 Phil Elwellconfigs: Restore CONFIG_GPIO_SYSFS
next