From: Philippe Coval <philippe.coval@open.eurogiciel.org>
Date: Fri, 22 May 2015 16:05:22 +0000 (+0200)
Subject: usbtouchscreen: adds support for inverting X or Y axis (or both)
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=refs%2Fheads%2Fsandbox%2Fpcoval%2Ftizen_common;p=profile%2Fcommon%2Fkernel-common.git

usbtouchscreen: adds support for inverting X or Y axis (or both)

Invert Y is needed (together with swap XY) for some touchscreens :

- LeadingTouch screens (at least for some of them)
- cartft 8in4 (USB ID=0eef:0001)

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Philippe Coval <philippe.coval@open.eurogiciel.org>
Change-Id: I3b551be8734d5d5f272c8ee8579d2233d6c11ca4
---

diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index a0966331a89b..28db033b9377 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -63,6 +63,12 @@
 static bool swap_xy;
 module_param(swap_xy, bool, 0644);
 MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+static int invert_x;
+module_param(invert_x, bool, 0644);
+MODULE_PARM_DESC(invert_x, "Invert X axis.");
+static int invert_y;
+module_param(invert_y, bool, 0644);
+MODULE_PARM_DESC(invert_y, "Invert Y axis.");
 
 static bool hwcalib_xy;
 module_param(hwcalib_xy, bool, 0644);
@@ -1292,6 +1298,7 @@ static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
                                  unsigned char *pkt, int len)
 {
 	struct usbtouch_device_info *type = usbtouch->type;
+	int x, y;
 
 	if (!type->read_data(usbtouch, pkt))
 			return;
@@ -1299,12 +1306,20 @@ static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
 	input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);
 
 	if (swap_xy) {
-		input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
-		input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
+		x = usbtouch->y;
+		y = usbtouch->x;
 	} else {
-		input_report_abs(usbtouch->input, ABS_X, usbtouch->x);
-		input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);
+		x = usbtouch->x;
+		y = usbtouch->y;
 	}
+	if (invert_x)
+		x = type->max_xc - x + type->min_xc;
+	if (invert_y)
+		y = type->max_yc - y + type->min_yc;
+
+	input_report_abs(usbtouch->input, ABS_X, x);
+	input_report_abs(usbtouch->input, ABS_Y, y);
+
 	if (type->max_press)
 		input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
 	input_sync(usbtouch->input);