From: zhongyuan <zy123.yuan@samsung.com>
Date: Mon, 22 Oct 2018 06:02:10 +0000 (+0800)
Subject: [common][nfc][DOTTIZEN-3092, improve manual test descriptions]
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=refs%2Fchanges%2F67%2F191667%2F2;p=test%2Ftct%2Fweb%2Fapi.git

[common][nfc][DOTTIZEN-3092, improve manual test descriptions]

Change-Id: I5c369b118d6892f152894ddbef15d5cdec20dd98
---

diff --git a/common/tct-nfc-tizen-tests/tests.full.xml b/common/tct-nfc-tizen-tests/tests.full.xml
index c0ae6aa2f..b75f63577 100755
--- a/common/tct-nfc-tizen-tests/tests.full.xml
+++ b/common/tct-nfc-tizen-tests/tests.full.xml
@@ -2711,7 +2711,7 @@
       </capabilities>
       <testcase purpose="Check if method NFCAdapter::setPeerListener() successfully registers listener for detecting NFC peer" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCAdapter_setPeerListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected.</step_desc>
@@ -2778,7 +2778,7 @@
       </testcase>
       <testcase purpose="Check if method NFCAdapter::unsetPeerListener() disables listener for detecting an NFC peer-to-peer target" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCAdapter_unsetPeerListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected and then click "Peer was attached" button.</step_desc>
@@ -2821,7 +2821,7 @@
       </testcase>
       <testcase purpose="Check NFCPeer attributes, method existence and TypeMismatchError throwing" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P3" id="NFCPeer">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected.</step_desc>
@@ -2922,7 +2922,7 @@
       </testcase>
       <testcase purpose="Check if NFCPeerDetectCallback::onattach() callback is called with proper argument when NFC peer is detected" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeerDetectCallback_onattach">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected.</step_desc>
@@ -2941,7 +2941,7 @@
       </testcase>
       <testcase purpose="Check if NFCPeerDetectCallback::ondetach() is called when NFC peer is taken away" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeerDetectCallback_ondetach">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Put the other NFC device close to your device until it will be detected and then take it away.</step_desc>
@@ -2972,7 +2972,7 @@
       </testcase>
       <testcase purpose="Check if method NFCPeer::sendNDEF() reports error by calling errorCallback when peer is disconnected" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCPeer_sendNDEF_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to take NDEF message from NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Put the other NFC device close to your device until it will be detected and then take it away before the expiration of 3 seconds.</step_desc>
@@ -2991,7 +2991,7 @@
       </testcase>
       <testcase purpose="Check if method NFCPeer::sendNDEF() sends data to other NFC device" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_sendNDEF_sendData">
         <description>
-          <pre_condition>Turn off the NFC adapter. Prepare the other device with NFC turned on. Other device should be able to take NDEF message from NFC.</pre_condition>
+          <pre_condition>Turn off NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected.</step_desc>
@@ -3010,7 +3010,7 @@
       </testcase>
       <testcase purpose="Check if method NFCPeer::sendNDEF(ndefMessage, onSuccess, onError) can be called successfully" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_sendNDEF_with_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to take NDEF message from NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected. If other device receives message then PASS.</step_desc>
@@ -3029,7 +3029,7 @@
       </testcase>
       <testcase purpose="Check if NFCPeer::sendNDEF(ndefMessage, onSuccess) can be called successfully" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_sendNDEF_with_successCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to take NDEF message from NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected. If other device receives message then PASS.</step_desc>
@@ -3048,10 +3048,22 @@
       </testcase>
       <testcase purpose="Check if NFCPeer::setReceiveNDEFListener() method works properly" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_setReceiveNDEFListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
-              <step_desc>Click "Run". Move other NFC device close so it will be detected, then send a NFC message from it. Then click the "Message was sent" button below.</step_desc>
+              <step_desc>Click "Run".</step_desc>
+              <expected>Alert message will show up</expected>
+            </step>
+            <step order="2">
+              <step_desc>Move other NFC device close so it will be detected.</step_desc>
+              <expected>Detect NFC device</expected>
+            </step>
+            <step order="3">
+              <step_desc>Click "OK".</step_desc>
+              <expected>Alert Message is closed</expected>
+            </step>
+            <step order="4">
+              <step_desc>Send a NFC message(on emulator Type Name Format: NDEF_TNF_WELL_KNOWN)</step_desc>
               <expected>pass</expected>
             </step>
           </steps>
@@ -3067,7 +3079,7 @@
       </testcase>
       <testcase purpose="Check if NFCPeer::unsetReceiveNDEFListener() method works properly" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_unsetReceiveNDEFListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected, then send a NFC message from it. Then click the "Message was sent" button below.</step_desc>
@@ -3086,7 +3098,7 @@
       </testcase>
       <testcase purpose="Check if method unsetReceiveNDEFListener of NFCPeer accepts extra argument" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCPeer_unsetReceiveNDEFListener_extra_argument">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected.</step_desc>
@@ -3451,7 +3463,19 @@
           <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC.</pre_condition>
           <steps>
             <step order="1">
-              <step_desc>Click "Run". Move other NFC device close so it will be detected, then send a NFC message from it. Then click the "Message was sent" button below.</step_desc>
+              <step_desc>Click "Run".</step_desc>
+              <expected>Alert message will show up</expected>
+            </step>
+            <step order="2">
+              <step_desc>Move other NFC device close so it will be detected.</step_desc>
+              <expected>Detect NFC device</expected>
+            </step>
+            <step order="3">
+              <step_desc>Click "OK".</step_desc>
+              <expected>Alert Message is closed</expected>
+            </step>
+            <step order="4">
+              <step_desc>Send a NFC message(on emulator Type Name Format: NDEF_TNF_WELL_KNOWN)</step_desc>
               <expected>pass</expected>
             </step>
           </steps>
@@ -3547,7 +3571,7 @@
       </testcase>
       <testcase purpose="Check if method NFCAdapter::setTagListener() successfully registers listener for detecting NFC tag" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCAdapter_setTagListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
@@ -3626,7 +3650,7 @@
       </testcase>
       <testcase purpose="Check if onattach() callback is called successfully when NFC tag is detected after NFCAdapter::setTagListener() with null tagFilter" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCAdapter_setTagListener_tagFilter_is_null">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close to the device so it will be detected.</step_desc>
@@ -3645,7 +3669,7 @@
       </testcase>
       <testcase purpose="Check if onattach() callback is called successfully when NFC tag is detected after NFCAdapter::setTagListener() with valid tagFilter" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCAdapter_setTagListener_with_tagFilter">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close to the device so it will be detected.</step_desc>
@@ -3664,7 +3688,7 @@
       </testcase>
       <testcase purpose="Check if method NFCAdapter::unsetTagListener() disables listener for detecting an NFC tag" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCAdapter_unsetTagListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected and then click "Tag was attached" button.</step_desc>
@@ -3707,7 +3731,7 @@
       </testcase>
       <testcase purpose="Check NFCTag attributes, method existence and TypeMismatchError throwing" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P3" id="NFCTag">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
@@ -3868,7 +3892,7 @@
       </testcase>
       <testcase purpose="Check if NFCTagDetectCallback::onattach() callback is called with proper argument when NFC tag is detected" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCTagDetectCallback_onattach">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
@@ -3887,7 +3911,7 @@
       </testcase>
       <testcase purpose="Check if NFCTagDetectCallback::ondetach() callback is called when NFC tag is disconnected" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCTagDetectCallback_ondetach">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close until it will be detected and then take it away.</step_desc>
@@ -3918,7 +3942,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::readNDEF() reports error by calling errorCallback when NFC tag was disconnected" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCTag_readNDEF_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close until it will be detected and then take it away before the expiration of 3 seconds.</step_desc>
@@ -3937,7 +3961,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::readNDEF() successfully reads data from NFC tag" type="compliance" onload_delay="90" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCTag_readNDEF_without_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
@@ -3961,7 +3985,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::transceive() reports error by calling errorCallback when NFC tag is disconnected" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCTag_transceive_with_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close until it will be detected and then take it away before the expiration of 3 seconds.</step_desc>
@@ -3980,7 +4004,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::writeNDEF() can be called with only mandatory argument" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCTag_writeNDEF">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
@@ -3999,7 +4023,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::writeNDEF() reports error by calling errorCallback when NFC tag is disconnected" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCTag_writeNDEF_with_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close until it will be detected and then take it away before the expiration of 3 seconds.</step_desc>
@@ -4018,7 +4042,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::writeNDEF() calls successCallback" type="compliance" status="approved" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCTag_writeNDEF_with_successCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
diff --git a/common/tct-nfc-tizen-tests/tests.xml b/common/tct-nfc-tizen-tests/tests.xml
index 13726b2c7..4000ef480 100755
--- a/common/tct-nfc-tizen-tests/tests.xml
+++ b/common/tct-nfc-tizen-tests/tests.xml
@@ -1157,7 +1157,7 @@
       </capabilities>
       <testcase purpose="Check if method NFCAdapter::setPeerListener() successfully registers listener for detecting NFC peer" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCAdapter_setPeerListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected.</step_desc>
@@ -1189,7 +1189,7 @@
       </testcase>
       <testcase purpose="Check if method NFCAdapter::unsetPeerListener() disables listener for detecting an NFC peer-to-peer target" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCAdapter_unsetPeerListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected and then click "Peer was attached" button.</step_desc>
@@ -1211,7 +1211,7 @@
       </testcase>
       <testcase purpose="Check NFCPeer attributes, method existence and TypeMismatchError throwing" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P3" id="NFCPeer">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected.</step_desc>
@@ -1228,7 +1228,7 @@
       </testcase>
       <testcase purpose="Check if NFCPeerDetectCallback::onattach() callback is called with proper argument when NFC peer is detected" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeerDetectCallback_onattach">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected.</step_desc>
@@ -1240,7 +1240,7 @@
       </testcase>
       <testcase purpose="Check if NFCPeerDetectCallback::ondetach() is called when NFC peer is taken away" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeerDetectCallback_ondetach">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Put the other NFC device close to your device until it will be detected and then take it away.</step_desc>
@@ -1257,7 +1257,7 @@
       </testcase>
       <testcase purpose="Check if method NFCPeer::sendNDEF() reports error by calling errorCallback when peer is disconnected" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCPeer_sendNDEF_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to take NDEF message from NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Put the other NFC device close to your device until it will be detected and then take it away before the expiration of 3 seconds.</step_desc>
@@ -1269,7 +1269,7 @@
       </testcase>
       <testcase purpose="Check if method NFCPeer::sendNDEF() sends data to other NFC device" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_sendNDEF_sendData">
         <description>
-          <pre_condition>Turn off the NFC adapter. Prepare the other device with NFC turned on. Other device should be able to take NDEF message from NFC.</pre_condition>
+          <pre_condition>Turn off NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected.</step_desc>
@@ -1281,7 +1281,7 @@
       </testcase>
       <testcase purpose="Check if method NFCPeer::sendNDEF(ndefMessage, onSuccess, onError) can be called successfully" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_sendNDEF_with_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to take NDEF message from NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected. If other device receives message then PASS.</step_desc>
@@ -1293,7 +1293,7 @@
       </testcase>
       <testcase purpose="Check if NFCPeer::sendNDEF(ndefMessage, onSuccess) can be called successfully" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_sendNDEF_with_successCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to take NDEF message from NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected. If other device receives message then PASS.</step_desc>
@@ -1305,10 +1305,22 @@
       </testcase>
       <testcase purpose="Check if NFCPeer::setReceiveNDEFListener() method works properly" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_setReceiveNDEFListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
-              <step_desc>Click "Run". Move other NFC device close so it will be detected, then send a NFC message from it. Then click the "Message was sent" button below.</step_desc>
+              <step_desc>Click "Run".</step_desc>
+              <expected>Alert message will show up</expected>
+            </step>
+            <step order="2">
+              <step_desc>Move other NFC device close so it will be detected.</step_desc>
+              <expected>Detect NFC device</expected>
+            </step>
+            <step order="3">
+              <step_desc>Click "OK".</step_desc>
+              <expected>Alert Message is closed</expected>
+            </step>
+            <step order="4">
+              <step_desc>Send a NFC message(on emulator Type Name Format: NDEF_TNF_WELL_KNOWN)</step_desc>
               <expected>pass</expected>
             </step>
           </steps>
@@ -1317,7 +1329,7 @@
       </testcase>
       <testcase purpose="Check if NFCPeer::unsetReceiveNDEFListener() method works properly" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_unsetReceiveNDEFListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected, then send a NFC message from it. Then click the "Message was sent" button below.</step_desc>
@@ -1329,7 +1341,7 @@
       </testcase>
       <testcase purpose="Check if method unsetReceiveNDEFListener of NFCPeer accepts extra argument" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCPeer_unsetReceiveNDEFListener_extra_argument">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move other NFC device close so it will be detected.</step_desc>
@@ -1495,10 +1507,22 @@
       </testcase>
       <testcase purpose="Check if NFCPeer::setReceiveNDEFListener() method works properly" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCPeer_setReceiveNDEFListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare the other device with NFC turned on. Other device should be able to send NDEF message by NFC. Make sure to detach the devices(on emulator - P2P Detached button)</pre_condition>
           <steps>
             <step order="1">
-              <step_desc>Click "Run". Move other NFC device close so it will be detected, then send a NFC message from it. Then click the "Message was sent" button below.</step_desc>
+              <step_desc>Click "Run".</step_desc>
+              <expected>Alert message will show up</expected>
+            </step>
+            <step order="2">
+              <step_desc>Move other NFC device close so it will be detected.</step_desc>
+              <expected>Detect NFC device</expected>
+            </step>
+            <step order="3">
+              <step_desc>Click "OK".</step_desc>
+              <expected>Alert Message is closed</expected>
+            </step>
+            <step order="4">
+              <step_desc>Send a NFC message(on emulator Type Name Format: NDEF_TNF_WELL_KNOWN)</step_desc>
               <expected>pass</expected>
             </step>
           </steps>
@@ -1554,7 +1578,7 @@
 -->
       <testcase purpose="Check if method NFCAdapter::setTagListener() successfully registers listener for detecting NFC tag" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCAdapter_setTagListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
@@ -1591,7 +1615,7 @@
       </testcase>
       <testcase purpose="Check if onattach() callback is called successfully when NFC tag is detected after NFCAdapter::setTagListener() with null tagFilter" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCAdapter_setTagListener_tagFilter_is_null">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close to the device so it will be detected.</step_desc>
@@ -1603,7 +1627,7 @@
       </testcase>
       <testcase purpose="Check if onattach() callback is called successfully when NFC tag is detected after NFCAdapter::setTagListener() with valid tagFilter" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCAdapter_setTagListener_with_tagFilter">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close to the device so it will be detected.</step_desc>
@@ -1615,7 +1639,7 @@
       </testcase>
       <testcase purpose="Check if method NFCAdapter::unsetTagListener() disables listener for detecting an NFC tag" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCAdapter_unsetTagListener">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected and then click "Tag was attached" button.</step_desc>
@@ -1637,7 +1661,7 @@
       </testcase>
       <testcase purpose="Check NFCTag attributes, method existence and TypeMismatchError throwing" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P3" id="NFCTag">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
@@ -1654,7 +1678,7 @@
       </testcase>
       <testcase purpose="Check if NFCTagDetectCallback::onattach() callback is called with proper argument when NFC tag is detected" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCTagDetectCallback_onattach">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
@@ -1666,7 +1690,7 @@
       </testcase>
       <testcase purpose="Check if NFCTagDetectCallback::ondetach() callback is called when NFC tag is disconnected" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCTagDetectCallback_ondetach">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close until it will be detected and then take it away.</step_desc>
@@ -1683,7 +1707,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::readNDEF() reports error by calling errorCallback when NFC tag was disconnected" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCTag_readNDEF_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close until it will be detected and then take it away before the expiration of 3 seconds.</step_desc>
@@ -1695,7 +1719,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::readNDEF() successfully reads data from NFC tag" onload_delay="90" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCTag_readNDEF_without_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
@@ -1707,7 +1731,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::transceive() reports error by calling errorCallback when NFC tag is disconnected" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCTag_transceive_with_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close until it will be detected and then take it away before the expiration of 3 seconds.</step_desc>
@@ -1719,7 +1743,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::writeNDEF() can be called with only mandatory argument" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCTag_writeNDEF">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>
@@ -1731,7 +1755,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::writeNDEF() reports error by calling errorCallback when NFC tag is disconnected" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P2" id="NFCTag_writeNDEF_with_errorCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close until it will be detected and then take it away before the expiration of 3 seconds.</step_desc>
@@ -1743,7 +1767,7 @@
       </testcase>
       <testcase purpose="Check if method NFCTag::writeNDEF() calls successCallback" component="TizenAPI/Communication/NFC" execution_type="manual" priority="P1" id="NFCTag_writeNDEF_with_successCallback">
         <description>
-          <pre_condition>Turn on NFC adapter. Prepare NFC tag.</pre_condition>
+          <pre_condition>Turn on NFC adapter. Prepare NFC tag. Make sure to detach the tag(on emulator - NDEF Tag Detached)</pre_condition>
           <steps>
             <step order="1">
               <step_desc>Click "Run". Move NFC tag close so it will be detected.</step_desc>