From: Aleksander Mistewicz <a.mistewicz@samsung.com>
Date: Tue, 12 Sep 2017 10:56:27 +0000 (+0200)
Subject: Add support for rpi3 2parts images
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=refs%2Fchanges%2F27%2F181827%2F1;p=tools%2Ftestlab%2Fmajor.git

Add support for rpi3 2parts images

Change-Id: I27f34b96a3759c7a545b97c882efa9284d6dc46c
---

diff --git a/tct/flash/flash_dd_rpi3-2parts.sh b/tct/flash/flash_dd_rpi3-2parts.sh
new file mode 100755
index 0000000..992aa37
--- /dev/null
+++ b/tct/flash/flash_dd_rpi3-2parts.sh
@@ -0,0 +1,51 @@
+#!/bin/sh
+
+# Copyright (c) 2017 Samsung Electronics Co., Ltd All Rights Reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# script for flashing SD card using dd
+# the layout is:
+#   * boot.img          -> 1st partition
+#   * ramdisk.img       -> 2nd partition
+#   * systemd-data.img  -> 3rd partition
+#   * rootfs.img        -> 5th partition
+#   * modules.img       -> 6th partition
+#
+# script always checks for block device availability
+# files are taken from CWD
+# there are no checks if files exist, dd should fail
+#
+# SD card should be prepared using script mkpart.sh available at:
+# https://wiki.tizen.org/wiki/Quick_guide_for_odroid#Fuse_bootloader_image
+#
+# Author: Aleksander Mistewicz <a.mistewicz@samsung.com>
+
+TESTLAB_SCRIPTS="$(CDPATH='' cd -- "$(dirname -- "$0")"/.. && pwd -P)"
+
+. "${TESTLAB_SCRIPTS}/common.sh"
+
+test -n "${1}" || die "Too few arguments!"
+
+sdd="sudo dd bs=4096"
+test -b "${1}1" || die "No ${1}1"
+$sdd if=boot.img "of=${1}1"
+test -b "${1}2" || die "No ${1}2"
+$sdd if=ramdisk.img "of=${1}2"
+test -b "${1}3" || die "No ${1}3"
+$sdd if=system-data.img "of=${1}3"
+test -b "${1}5" || die "No ${1}5"
+$sdd if=rootfs.img "of=${1}5"
+test -b "${1}6" || die "No ${1}6"
+$sdd if=modules.img "of=${1}6"
+sync
diff --git a/tct/rpi3_prepare_flash_conf.sh b/tct/rpi3_prepare_flash_conf.sh
index 63083fc..ab17589 100755
--- a/tct/rpi3_prepare_flash_conf.sh
+++ b/tct/rpi3_prepare_flash_conf.sh
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright (c) 2016 Samsung Electronics Co., Ltd All Rights Reserved
+# Copyright (c) 2016-2017 Samsung Electronics Co., Ltd All Rights Reserved
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -14,7 +14,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-# Script used to flash, prepare and configure ODROID U3
+# Script used to flash, prepare and configure RPI 3
 #
 # Syntax is: odroid_prepare_conf_flash.sh $SDMUX $BOOT_IMAGE $IMAGE \
 #    [$NATIVE_TCT_REPO]
@@ -51,7 +51,14 @@ UUID_FILE="/var/tmp/uuid-${SDMUX}"
 DEV_SDCARD=$(uuid2dev "${UUID_FILE}" "${SDMUX}") || die "sdcard not found!"
 
 cd "${IMAGE_UNPACKED}"
-"${TESTLAB_SCRIPTS}/flash/flash_dd_rpi3.sh" "${DEV_SDCARD}"
+case "$IMAGE" in
+    *2parts*)
+        "${TESTLAB_SCRIPTS}/flash/flash_dd_rpi3-2parts.sh" "${DEV_SDCARD}"
+        ;;
+    *)
+        "${TESTLAB_SCRIPTS}/flash/flash_dd_rpi3.sh" "${DEV_SDCARD}"
+        ;;
+esac
 RET=$?
 cd "${OLDPWD}"