From: Cixi Geng Date: Tue, 19 Apr 2022 14:24:57 +0000 (+0800) Subject: iio: adc: sc27xx: add support for PMIC sc2720 and sc2721 X-Git-Tag: v6.6.17~7345^2~81^2~12 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=fff4a7a890ea23e671c55e322c8b341f1f94c4e3;p=platform%2Fkernel%2Flinux-rpi.git iio: adc: sc27xx: add support for PMIC sc2720 and sc2721 sc2720 and sc2721 is the product of sc27xx series. Co-developed-by: Yuming Zhu Signed-off-by: Yuming Zhu Signed-off-by: Cixi Geng Link: https://lore.kernel.org/r/20220419142458.884933-7-gengcixi@gmail.com Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c index 1d02390..02d6e81 100644 --- a/drivers/iio/adc/sc27xx_adc.c +++ b/drivers/iio/adc/sc27xx_adc.c @@ -9,11 +9,13 @@ #include #include #include +#include #include /* PMIC global registers definition */ #define SC2731_MODULE_EN 0xc08 #define SC27XX_MODULE_ADC_EN BIT(5) +#define SC2721_ARM_CLK_EN 0xc0c #define SC2731_ARM_CLK_EN 0xc10 #define SC27XX_CLK_ADC_EN BIT(5) #define SC27XX_CLK_ADC_CLK_EN BIT(6) @@ -37,7 +39,9 @@ /* Bits and mask definition for SC27XX_ADC_CH_CFG register */ #define SC27XX_ADC_CHN_ID_MASK GENMASK(4, 0) #define SC27XX_ADC_SCALE_MASK GENMASK(10, 9) +#define SC2721_ADC_SCALE_MASK BIT(5) #define SC27XX_ADC_SCALE_SHIFT 9 +#define SC2721_ADC_SCALE_SHIFT 5 /* Bits definitions for SC27XX_ADC_INT_EN registers */ #define SC27XX_ADC_IRQ_EN BIT(0) @@ -67,8 +71,15 @@ #define SC27XX_RATIO_NUMERATOR_OFFSET 16 #define SC27XX_RATIO_DENOMINATOR_MASK GENMASK(15, 0) +/* ADC specific channel reference voltage 3.5V */ +#define SC27XX_ADC_REFVOL_VDD35 3500000 + +/* ADC default channel reference voltage is 2.8V */ +#define SC27XX_ADC_REFVOL_VDD28 2800000 + struct sc27xx_adc_data { struct device *dev; + struct regulator *volref; struct regmap *regmap; /* * One hardware spinlock to synchronize between the multiple @@ -95,6 +106,7 @@ struct sc27xx_adc_variant_data { const struct sc27xx_adc_linear_graph *sscale_cal; void (*init_scale)(struct sc27xx_adc_data *data); int (*get_ratio)(int channel, int scale); + bool set_volref; }; struct sc27xx_adc_linear_graph { @@ -130,6 +142,16 @@ static const struct sc27xx_adc_linear_graph sc2731_small_scale_graph_calib = { 100, 84, }; +static const struct sc27xx_adc_linear_graph big_scale_graph_calib = { + 4200, 856, + 3600, 733, +}; + +static const struct sc27xx_adc_linear_graph small_scale_graph_calib = { + 1000, 833, + 100, 80, +}; + static int sc27xx_adc_get_calib_data(u32 calib_data, int calib_adc) { return ((calib_data & 0xff) + calib_adc - 128) * 4; @@ -191,6 +213,94 @@ static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data, return 0; } +static int sc2720_adc_get_ratio(int channel, int scale) +{ + switch (channel) { + case 14: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(68, 900); + case 1: + return SC27XX_VOLT_RATIO(68, 1760); + case 2: + return SC27XX_VOLT_RATIO(68, 2327); + case 3: + return SC27XX_VOLT_RATIO(68, 3654); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + case 16: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(48, 100); + case 1: + return SC27XX_VOLT_RATIO(480, 1955); + case 2: + return SC27XX_VOLT_RATIO(480, 2586); + case 3: + return SC27XX_VOLT_RATIO(48, 406); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + case 21: + case 22: + case 23: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(3, 8); + case 1: + return SC27XX_VOLT_RATIO(375, 1955); + case 2: + return SC27XX_VOLT_RATIO(375, 2586); + case 3: + return SC27XX_VOLT_RATIO(300, 3248); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + default: + switch (scale) { + case 0: + return SC27XX_VOLT_RATIO(1, 1); + case 1: + return SC27XX_VOLT_RATIO(1000, 1955); + case 2: + return SC27XX_VOLT_RATIO(1000, 2586); + case 3: + return SC27XX_VOLT_RATIO(100, 406); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + } + return SC27XX_VOLT_RATIO(1, 1); +} + +static int sc2721_adc_get_ratio(int channel, int scale) +{ + switch (channel) { + case 1: + case 2: + case 3: + case 4: + return scale ? SC27XX_VOLT_RATIO(400, 1025) : + SC27XX_VOLT_RATIO(1, 1); + case 5: + return SC27XX_VOLT_RATIO(7, 29); + case 7: + case 9: + return scale ? SC27XX_VOLT_RATIO(100, 125) : + SC27XX_VOLT_RATIO(1, 1); + case 14: + return SC27XX_VOLT_RATIO(68, 900); + case 16: + return SC27XX_VOLT_RATIO(48, 100); + case 19: + return SC27XX_VOLT_RATIO(1, 3); + default: + return SC27XX_VOLT_RATIO(1, 1); + } + return SC27XX_VOLT_RATIO(1, 1); +} + static int sc2731_adc_get_ratio(int channel, int scale) { switch (channel) { @@ -219,6 +329,34 @@ static int sc2731_adc_get_ratio(int channel, int scale) /* * According to the datasheet set specific value on some channel. */ +static void sc2720_adc_scale_init(struct sc27xx_adc_data *data) +{ + int i; + + for (i = 0; i < SC27XX_ADC_CHANNEL_MAX; i++) { + switch (i) { + case 5: + data->channel_scale[i] = 3; + break; + case 7: + case 9: + data->channel_scale[i] = 2; + break; + case 13: + data->channel_scale[i] = 1; + break; + case 19: + case 30: + case 31: + data->channel_scale[i] = 3; + break; + default: + data->channel_scale[i] = 0; + break; + } + } +} + static void sc2731_adc_scale_init(struct sc27xx_adc_data *data) { int i; @@ -241,7 +379,7 @@ static void sc2731_adc_scale_init(struct sc27xx_adc_data *data) static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel, int scale, int *val) { - int ret; + int ret, ret_volref; u32 tmp, value, status; ret = hwspin_lock_timeout_raw(data->hwlock, SC27XX_ADC_HWLOCK_TIMEOUT); @@ -250,10 +388,25 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel, return ret; } + /* + * According to the sc2721 chip data sheet, the reference voltage of + * specific channel 30 and channel 31 in ADC module needs to be set from + * the default 2.8v to 3.5v. + */ + if ((data->var_data->set_volref) && (channel == 30 || channel == 31)) { + ret = regulator_set_voltage(data->volref, + SC27XX_ADC_REFVOL_VDD35, + SC27XX_ADC_REFVOL_VDD35); + if (ret) { + dev_err(data->dev, "failed to set the volref 3.5v\n"); + goto unlock_adc; + } + } + ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL, SC27XX_ADC_EN, SC27XX_ADC_EN); if (ret) - goto unlock_adc; + goto regulator_restore; ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR, SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR); @@ -303,6 +456,17 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel, disable_adc: regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL, SC27XX_ADC_EN, 0); +regulator_restore: + if ((data->var_data->set_volref) && (channel == 30 || channel == 31)) { + ret_volref = regulator_set_voltage(data->volref, + SC27XX_ADC_REFVOL_VDD28, + SC27XX_ADC_REFVOL_VDD28); + if (ret_volref) { + dev_err(data->dev, "failed to set the volref 2.8v,ret_volref = 0x%x\n", + ret_volref); + ret = ret || ret_volref; + } + } unlock_adc: hwspin_unlock_raw(data->hwlock); @@ -551,6 +715,31 @@ static const struct sc27xx_adc_variant_data sc2731_data = { .sscale_cal = &sc2731_small_scale_graph_calib, .init_scale = sc2731_adc_scale_init, .get_ratio = sc2731_adc_get_ratio, + .set_volref = false, +}; + +static const struct sc27xx_adc_variant_data sc2721_data = { + .module_en = SC2731_MODULE_EN, + .clk_en = SC2721_ARM_CLK_EN, + .scale_shift = SC2721_ADC_SCALE_SHIFT, + .scale_mask = SC2721_ADC_SCALE_MASK, + .bscale_cal = &sc2731_big_scale_graph_calib, + .sscale_cal = &sc2731_small_scale_graph_calib, + .init_scale = sc2731_adc_scale_init, + .get_ratio = sc2721_adc_get_ratio, + .set_volref = true, +}; + +static const struct sc27xx_adc_variant_data sc2720_data = { + .module_en = SC2731_MODULE_EN, + .clk_en = SC2721_ARM_CLK_EN, + .scale_shift = SC27XX_ADC_SCALE_SHIFT, + .scale_mask = SC27XX_ADC_SCALE_MASK, + .bscale_cal = &big_scale_graph_calib, + .sscale_cal = &small_scale_graph_calib, + .init_scale = sc2720_adc_scale_init, + .get_ratio = sc2720_adc_get_ratio, + .set_volref = false, }; static int sc27xx_adc_probe(struct platform_device *pdev) @@ -603,6 +792,14 @@ static int sc27xx_adc_probe(struct platform_device *pdev) } sc27xx_data->dev = dev; + if (pdata->set_volref) { + sc27xx_data->volref = devm_regulator_get(dev, "vref"); + if (IS_ERR(sc27xx_data->volref)) { + ret = PTR_ERR(sc27xx_data->volref); + return dev_err_probe(dev, ret, "failed to get ADC volref\n"); + } + } + sc27xx_data->var_data = pdata; sc27xx_data->var_data->init_scale(sc27xx_data); @@ -632,6 +829,8 @@ static int sc27xx_adc_probe(struct platform_device *pdev) static const struct of_device_id sc27xx_adc_of_match[] = { { .compatible = "sprd,sc2731-adc", .data = &sc2731_data}, + { .compatible = "sprd,sc2721-adc", .data = &sc2721_data}, + { .compatible = "sprd,sc2720-adc", .data = &sc2720_data}, { } }; MODULE_DEVICE_TABLE(of, sc27xx_adc_of_match);