From: Joakim Tjernlund Date: Thu, 6 Mar 2008 10:48:46 +0000 (+0800) Subject: ucc_geth: use correct thread number for 10/100Mbps link X-Git-Tag: v2.6.25-rc7~25^2~36 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ffea31ed1c93a599d14de484a2c5c701f4480ba3;p=platform%2Fkernel%2Flinux-exynos.git ucc_geth: use correct thread number for 10/100Mbps link Use thread number of 1 for 10/100Mbps link instead of 4. Signed-off-by: Joakim Tjernlund Signed-off-by: Li Yang Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index fba0811..8cc3166 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -154,8 +154,8 @@ static struct ucc_geth_info ugeth_primary_info = { .rxQoSMode = UCC_GETH_QOS_MODE_DEFAULT, .aufc = UPSMR_AUTOMATIC_FLOW_CONTROL_MODE_NONE, .padAndCrc = MACCFG2_PAD_AND_CRC_MODE_PAD_AND_CRC, - .numThreadsTx = UCC_GETH_NUM_OF_THREADS_4, - .numThreadsRx = UCC_GETH_NUM_OF_THREADS_4, + .numThreadsTx = UCC_GETH_NUM_OF_THREADS_1, + .numThreadsRx = UCC_GETH_NUM_OF_THREADS_1, .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, }; @@ -3975,6 +3975,8 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ug_info->uf_info.utfs = UCC_GETH_UTFS_GIGA_INIT; ug_info->uf_info.utfet = UCC_GETH_UTFET_GIGA_INIT; ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT; + ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4; + ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4; } /* Set the bus id */