From: Courtney Cavin Date: Mon, 12 Dec 2011 07:38:27 +0000 (-0800) Subject: Input: add driver for Sharp gp2ap002a00f proximity sensor X-Git-Tag: upstream/snapshot3+hdmi~3244^2~161^2~22 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ff803ed4ddbbf9f4bbd439b5e23dc25a4e0cce7a;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git Input: add driver for Sharp gp2ap002a00f proximity sensor This driver adds support for Sharp's GP2AP002A00F proximity sensor. The proximity is measured as a binary switch, i.e. an object is either detected or not detected. Hence, this driver is implemented as a switch that reports SW_FRONT_PROXIMITY. Reviewed-by: Datta Shubhrajyoti Signed-off-by: Courtney Cavin Signed-off-by: Oskar Andero Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index e53b443..7b46781 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -179,6 +179,17 @@ config INPUT_APANEL To compile this driver as a module, choose M here: the module will be called apanel. +config INPUT_GP2A + tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver" + depends on I2C + depends on GENERIC_GPIO + help + Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip + hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called gp2ap002a00f. + config INPUT_GPIO_TILT_POLLED tristate "Polled GPIO tilt switch" depends on GENERIC_GPIO diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 90070c1..46671a8 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -22,8 +22,9 @@ obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o -obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o +obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o +obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c new file mode 100644 index 0000000..71fba8c --- /dev/null +++ b/drivers/input/misc/gp2ap002a00f.c @@ -0,0 +1,299 @@ +/* + * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc. + * + * Author: Courtney Cavin + * Prepared for up-stream by: Oskar Andero + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct gp2a_data { + struct input_dev *input; + const struct gp2a_platform_data *pdata; + struct i2c_client *i2c_client; +}; + +enum gp2a_addr { + GP2A_ADDR_PROX = 0x0, + GP2A_ADDR_GAIN = 0x1, + GP2A_ADDR_HYS = 0x2, + GP2A_ADDR_CYCLE = 0x3, + GP2A_ADDR_OPMOD = 0x4, + GP2A_ADDR_CON = 0x6 +}; + +enum gp2a_controls { + /* Software Shutdown control: 0 = shutdown, 1 = normal operation */ + GP2A_CTRL_SSD = 0x01 +}; + +static int gp2a_report(struct gp2a_data *dt) +{ + int vo = gpio_get_value(dt->pdata->vout_gpio); + + input_report_switch(dt->input, SW_FRONT_PROXIMITY, !vo); + input_sync(dt->input); + + return 0; +} + +static irqreturn_t gp2a_irq(int irq, void *handle) +{ + struct gp2a_data *dt = handle; + + gp2a_report(dt); + + return IRQ_HANDLED; +} + +static int gp2a_enable(struct gp2a_data *dt) +{ + return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD, + GP2A_CTRL_SSD); +} + +static int gp2a_disable(struct gp2a_data *dt) +{ + return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD, + 0x00); +} + +static int gp2a_device_open(struct input_dev *dev) +{ + struct gp2a_data *dt = input_get_drvdata(dev); + int error; + + error = gp2a_enable(dt); + if (error < 0) { + dev_err(&dt->i2c_client->dev, + "unable to activate, err %d\n", error); + return error; + } + + gp2a_report(dt); + + return 0; +} + +static void gp2a_device_close(struct input_dev *dev) +{ + struct gp2a_data *dt = input_get_drvdata(dev); + int error; + + error = gp2a_disable(dt); + if (error < 0) + dev_err(&dt->i2c_client->dev, + "unable to deactivate, err %d\n", error); +} + +static int __devinit gp2a_initialize(struct gp2a_data *dt) +{ + int error; + + error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN, + 0x08); + if (error < 0) + return error; + + error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS, + 0xc2); + if (error < 0) + return error; + + error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE, + 0x04); + if (error < 0) + return error; + + error = gp2a_disable(dt); + + return error; +} + +static int __devinit gp2a_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct gp2a_platform_data *pdata = client->dev.platform_data; + struct gp2a_data *dt; + int error; + + if (!pdata) + return -EINVAL; + + if (pdata->hw_setup) { + error = pdata->hw_setup(client); + if (error < 0) + return error; + } + + error = gpio_request_one(pdata->vout_gpio, GPIOF_IN, GP2A_I2C_NAME); + if (error) + goto err_hw_shutdown; + + dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL); + if (!dt) { + error = -ENOMEM; + goto err_free_gpio; + } + + dt->pdata = pdata; + dt->i2c_client = client; + + error = gp2a_initialize(dt); + if (error < 0) + goto err_free_mem; + + dt->input = input_allocate_device(); + if (!dt->input) { + error = -ENOMEM; + goto err_free_mem; + } + + input_set_drvdata(dt->input, dt); + + dt->input->open = gp2a_device_open; + dt->input->close = gp2a_device_close; + dt->input->name = GP2A_I2C_NAME; + dt->input->id.bustype = BUS_I2C; + dt->input->dev.parent = &client->dev; + + input_set_capability(dt->input, EV_SW, SW_FRONT_PROXIMITY); + + error = request_threaded_irq(client->irq, NULL, gp2a_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + GP2A_I2C_NAME, dt); + if (error) { + dev_err(&client->dev, "irq request failed\n"); + goto err_free_input_dev; + } + + error = input_register_device(dt->input); + if (error) { + dev_err(&client->dev, "device registration failed\n"); + goto err_free_irq; + } + + device_init_wakeup(&client->dev, pdata->wakeup); + i2c_set_clientdata(client, dt); + + return 0; + +err_free_irq: + free_irq(client->irq, dt); +err_free_input_dev: + input_free_device(dt->input); +err_free_mem: + kfree(dt); +err_free_gpio: + gpio_free(pdata->vout_gpio); +err_hw_shutdown: + if (pdata->hw_shutdown) + pdata->hw_shutdown(client); + return error; +} + +static int __devexit gp2a_remove(struct i2c_client *client) +{ + struct gp2a_data *dt = i2c_get_clientdata(client); + const struct gp2a_platform_data *pdata = dt->pdata; + + device_init_wakeup(&client->dev, false); + + free_irq(client->irq, dt); + + input_unregister_device(dt->input); + kfree(dt); + + gpio_free(pdata->vout_gpio); + + if (pdata->hw_shutdown) + pdata->hw_shutdown(client); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int gp2a_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct gp2a_data *dt = i2c_get_clientdata(client); + int retval = 0; + + if (device_may_wakeup(&client->dev)) { + enable_irq_wake(client->irq); + } else { + mutex_lock(&dt->input->mutex); + if (dt->input->users) + retval = gp2a_disable(dt); + mutex_unlock(&dt->input->mutex); + } + + return retval; +} + +static int gp2a_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct gp2a_data *dt = i2c_get_clientdata(client); + int retval = 0; + + if (device_may_wakeup(&client->dev)) { + disable_irq_wake(client->irq); + } else { + mutex_lock(&dt->input->mutex); + if (dt->input->users) + retval = gp2a_enable(dt); + mutex_unlock(&dt->input->mutex); + } + + return retval; +} +#endif + +static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume); + +static const struct i2c_device_id gp2a_i2c_id[] = { + { GP2A_I2C_NAME, 0 }, + { } +}; + +static struct i2c_driver gp2a_i2c_driver = { + .driver = { + .name = GP2A_I2C_NAME, + .owner = THIS_MODULE, + .pm = &gp2a_pm, + }, + .probe = gp2a_probe, + .remove = __devexit_p(gp2a_remove), + .id_table = gp2a_i2c_id, +}; + +static int __init gp2a_init(void) +{ + return i2c_add_driver(&gp2a_i2c_driver); +} + +static void __exit gp2a_exit(void) +{ + i2c_del_driver(&gp2a_i2c_driver); +} + +module_init(gp2a_init); +module_exit(gp2a_exit); + +MODULE_AUTHOR("Courtney Cavin "); +MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h new file mode 100644 index 0000000..aad2fd4 --- /dev/null +++ b/include/linux/input/gp2ap002a00f.h @@ -0,0 +1,22 @@ +#ifndef _GP2AP002A00F_H_ +#define _GP2AP002A00F_H_ + +#include + +#define GP2A_I2C_NAME "gp2ap002a00f" + +/** + * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data + * @vout_gpio: The gpio connected to the object detected pin (VOUT) + * @wakeup: Set to true if the proximity can wake the device from suspend + * @hw_setup: Callback for setting up hardware such as gpios and vregs + * @hw_shutdown: Callback for properly shutting down hardware + */ +struct gp2a_platform_data { + int vout_gpio; + bool wakeup; + int (*hw_setup)(struct i2c_client *client); + int (*hw_shutdown)(struct i2c_client *client); +}; + +#endif