From: Denis Ciocca <denis.ciocca@st.com>
Date: Thu, 18 Jul 2019 22:53:48 +0000 (-0700)
Subject: iio:accel: device settings are set immediately during probe
X-Git-Tag: v5.4-rc1~134^2~160^2~59
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=feba6b18c926ad59cb7ea97e6023a38c6bf74310;p=platform%2Fkernel%2Flinux-rpi.git

iio:accel: device settings are set immediately during probe

This patch set accel settings right after probe start. This is
done in preparation of regmap that needs different configuration
based on multiread bit value.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---

diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index c3c8f2e..a92cf77 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -150,20 +150,29 @@ MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
 
 static int st_accel_i2c_probe(struct i2c_client *client)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *adata;
+	struct iio_dev *indio_dev;
 	const char *match;
 	int ret;
 
+	match = device_get_match_data(&client->dev);
+	if (match)
+		strlcpy(client->name, match, sizeof(client->name));
+
+	settings = st_accel_get_settings(client->name);
+	if (!settings) {
+		dev_err(&client->dev, "device name %s not recognized.\n",
+			client->name);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adata));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	adata = iio_priv(indio_dev);
-
-	match = device_get_match_data(&client->dev);
-	if (match)
-		strlcpy(client->name, match, sizeof(client->name));
+	adata->sensor_settings = (struct st_sensor_settings *)settings;
 
 	st_sensors_i2c_configure(indio_dev, client, adata);
 
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index 474742e..c0556db 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -102,18 +102,28 @@ MODULE_DEVICE_TABLE(of, st_accel_of_match);
 
 static int st_accel_spi_probe(struct spi_device *spi)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *adata;
+	struct iio_dev *indio_dev;
 	int err;
 
+	st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
+				 spi->modalias, sizeof(spi->modalias));
+
+	settings = st_accel_get_settings(spi->modalias);
+	if (!settings) {
+		dev_err(&spi->dev, "device name %s not recognized.\n",
+			spi->modalias);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adata));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	adata = iio_priv(indio_dev);
+	adata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
-				 spi->modalias, sizeof(spi->modalias));
 	st_sensors_spi_configure(indio_dev, spi, adata);
 
 	err = st_accel_common_probe(indio_dev);