From: Masahiro Yamada Date: Wed, 16 May 2018 02:41:07 +0000 (+0900) Subject: usb: dwc3: support clocks and resets for DWC3 core X-Git-Tag: v4.19~894^2~81^2~64 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=fe8abf332b8f66868013cfcd6bfe727136a2ab5f;p=platform%2Fkernel%2Flinux-rpi.git usb: dwc3: support clocks and resets for DWC3 core Historically, the clocks and resets are handled on the glue layer side instead of the DWC3 core. For simple cases, dwc3-of-simple.c takes care of arbitrary number of clocks and resets. The DT node structure typically looks like as follows: dwc3-glue { compatible = "foo,dwc3"; clocks = ...; resets = ...; ... dwc3 { compatible = "snps,dwc3"; ... }; } By supporting the clocks and the reset in the dwc3/core.c, it will be turned into a single node: dwc3 { compatible = "foo,dwc3", "snps,dwc3"; clocks = ...; resets = ...; ... } This commit adds the binding of clocks and resets specific to this IP. The number of clocks should generally be the same across SoCs, it is just some SoCs either tie clocks together or do not provide software control of some of the clocks. I took the clock names from the Synopsys datasheet: "ref" (ref_clk), "bus_early" (bus_clk_early), and "suspend" (suspend_clk). I found only one reset line in the datasheet, hence the reset-names property is omitted. Those clocks are required for new platforms. Enforcing the new binding breaks existing platforms since they specify clocks (and resets) in their glue layer node, but nothing in the core node. I listed such exceptional cases in the DT binding. The driver code has been relaxed to accept no clock. This change is based on the discussion [1]. I inserted reset_control_deassert() and clk_bulk_enable() before the first register access, i.e. dwc3_cache_hwparams(). [1] https://patchwork.kernel.org/patch/10284265/ Signed-off-by: Masahiro Yamada Reviewed-by: Rob Herring Signed-off-by: Felipe Balbi --- diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 0dbd308..7f13ebe 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -7,6 +7,26 @@ Required properties: - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. + - clock-names: should contain "ref", "bus_early", "suspend" + - clocks: list of phandle and clock specifier pairs corresponding to + entries in the clock-names property. + +Exception for clocks: + clocks are optional if the parent node (i.e. glue-layer) is compatible to + one of the following: + "amlogic,meson-axg-dwc3" + "amlogic,meson-gxl-dwc3" + "cavium,octeon-7130-usb-uctl" + "qcom,dwc3" + "samsung,exynos5250-dwusb3" + "samsung,exynos7-dwusb3" + "sprd,sc9860-dwc3" + "st,stih407-dwc3" + "ti,am437x-dwc3" + "ti,dwc3" + "ti,keystone-dwc3" + "rockchip,rk3399-dwc3" + "xlnx,zynqmp-dwc3" Optional properties: - usb-phy : array of phandle for the PHY device. The first element @@ -15,6 +35,7 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". + - resets: a single pair of phandle and reset specifier - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 25d7e9d..ea91310 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -8,6 +8,7 @@ * Sebastian Andrzej Siewior */ +#include #include #include #include @@ -24,6 +25,7 @@ #include #include #include +#include #include #include @@ -266,6 +268,12 @@ done: return 0; } +static const struct clk_bulk_data dwc3_core_clks[] = { + { .id = "ref" }, + { .id = "bus_early" }, + { .id = "suspend" }, +}; + /* * dwc3_frame_length_adjustment - Adjusts frame length if required * @dwc3: Pointer to our controller context structure @@ -667,6 +675,9 @@ static void dwc3_core_exit(struct dwc3 *dwc) usb_phy_set_suspend(dwc->usb3_phy, 1); phy_power_off(dwc->usb2_generic_phy); phy_power_off(dwc->usb3_generic_phy); + clk_bulk_disable(dwc->num_clks, dwc->clks); + clk_bulk_unprepare(dwc->num_clks, dwc->clks); + reset_control_assert(dwc->reset); } static bool dwc3_core_is_valid(struct dwc3 *dwc) @@ -1256,6 +1267,12 @@ static int dwc3_probe(struct platform_device *pdev) if (!dwc) return -ENOMEM; + dwc->clks = devm_kmemdup(dev, dwc3_core_clks, sizeof(dwc3_core_clks), + GFP_KERNEL); + if (!dwc->clks) + return -ENOMEM; + + dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); dwc->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1286,6 +1303,32 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_get_properties(dwc); + dwc->reset = devm_reset_control_get_optional_shared(dev, NULL); + if (IS_ERR(dwc->reset)) + return PTR_ERR(dwc->reset); + + ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); + if (ret == -EPROBE_DEFER) + return ret; + /* + * Clocks are optional, but new DT platforms should support all clocks + * as required by the DT-binding. + */ + if (ret) + dwc->num_clks = 0; + + ret = reset_control_deassert(dwc->reset); + if (ret) + goto put_clks; + + ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + if (ret) + goto assert_reset; + + ret = clk_bulk_enable(dwc->num_clks, dwc->clks); + if (ret) + goto unprepare_clks; + platform_set_drvdata(pdev, dwc); dwc3_cache_hwparams(dwc); @@ -1349,6 +1392,14 @@ err1: pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); + clk_bulk_disable(dwc->num_clks, dwc->clks); +unprepare_clks: + clk_bulk_unprepare(dwc->num_clks, dwc->clks); +assert_reset: + reset_control_assert(dwc->reset); +put_clks: + clk_bulk_put(dwc->num_clks, dwc->clks); + return ret; } @@ -1370,11 +1421,44 @@ static int dwc3_remove(struct platform_device *pdev) dwc3_free_event_buffers(dwc); dwc3_free_scratch_buffers(dwc); + clk_bulk_put(dwc->num_clks, dwc->clks); return 0; } #ifdef CONFIG_PM +static int dwc3_core_init_for_resume(struct dwc3 *dwc) +{ + int ret; + + ret = reset_control_deassert(dwc->reset); + if (ret) + return ret; + + ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + if (ret) + goto assert_reset; + + ret = clk_bulk_enable(dwc->num_clks, dwc->clks); + if (ret) + goto unprepare_clks; + + ret = dwc3_core_init(dwc); + if (ret) + goto disable_clks; + + return 0; + +disable_clks: + clk_bulk_disable(dwc->num_clks, dwc->clks); +unprepare_clks: + clk_bulk_unprepare(dwc->num_clks, dwc->clks); +assert_reset: + reset_control_assert(dwc->reset); + + return ret; +} + static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; @@ -1438,7 +1522,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; @@ -1449,7 +1533,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) break; case DWC3_GCTL_PRTCAP_HOST: if (!PMSG_IS_AUTO(msg)) { - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4f3b438..1765e01 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -891,6 +891,9 @@ struct dwc3_scratchpad_array { * @eps: endpoint array * @gadget: device side representation of the peripheral controller * @gadget_driver: pointer to the gadget driver + * @clks: array of clocks + * @num_clks: number of clocks + * @reset: reset control * @regs: base address for our registers * @regs_size: address space size * @fladj: frame length adjustment @@ -1013,6 +1016,11 @@ struct dwc3 { struct usb_gadget gadget; struct usb_gadget_driver *gadget_driver; + struct clk_bulk_data *clks; + int num_clks; + + struct reset_control *reset; + struct usb_phy *usb2_phy; struct usb_phy *usb3_phy;