From: Marco Franchi Date: Thu, 26 Oct 2017 15:25:14 +0000 (-0200) Subject: ARM: dts: imx53-tx53: Fix 'ethernet-phy@0' node with unit name and no reg property X-Git-Tag: v4.19~1679^2~20^2~124 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=faee0fe2e2ec540977c7080a68da87c39e1fe182;p=platform%2Fkernel%2Flinux-rpi.git ARM: dts: imx53-tx53: Fix 'ethernet-phy@0' node with unit name and no reg property The following build warning is seen with W=1: Warning (unit_address_vs_reg): Node /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 has a unit name, but no reg property Fix this warning by adding reg property from such node and, consequently, includes a mdio node into the fec node, with the 'address-cells' and 'size-cells' to avoid these other following warnings: Warning (reg_format): "reg" property in /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/aips@60000000/ethernet@63fec000/ethernet-phy@0 Signed-off-by: Marco Franchi Tested-by: Lothar Waßmann Acked-by: Lothar Waßmann Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 71b58b6..a22e461 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -225,10 +225,16 @@ mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ status = "okay"; - phy0: ethernet-phy@0 { - interrupt-parent = <&gpio2>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - device_type = "ethernet-phy"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + device_type = "ethernet-phy"; + }; }; };