From: IotaHydrae Date: Wed, 4 May 2022 11:59:04 +0000 (+0800) Subject: pinctrl: sunxi: fix f1c100s uart2 function X-Git-Tag: v6.6.17~7574^2~1 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=fa8785e5931367e2b43f2c507f26bcf3e281c0ca;p=platform%2Fkernel%2Flinux-rpi.git pinctrl: sunxi: fix f1c100s uart2 function Change suniv f1c100s pinctrl,PD14 multiplexing function lvds1 to uart2 When the pin PD13 and PD14 is setting up to uart2 function in dts, there's an error occurred: 1c20800.pinctrl: unsupported function uart2 on pin PD14 Because 'uart2' is not any one multiplexing option of PD14, and pinctrl don't know how to configure it. So change the pin PD14 lvds1 function to uart2. Signed-off-by: IotaHydrae Reviewed-by: Andre Przywara Link: https://lore.kernel.org/r/tencent_70C1308DDA794C81CAEF389049055BACEC09@qq.com Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c index 2801ca7..68a5b62 100644 --- a/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c +++ b/drivers/pinctrl/sunxi/pinctrl-suniv-f1c100s.c @@ -204,7 +204,7 @@ static const struct sunxi_desc_pin suniv_f1c100s_pins[] = { SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION(0x2, "lcd"), /* D20 */ - SUNXI_FUNCTION(0x3, "lvds1"), /* RX */ + SUNXI_FUNCTION(0x3, "uart2"), /* RX */ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)), SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15), SUNXI_FUNCTION(0x0, "gpio_in"),