From: Zhang Run Date: Thu, 24 Jan 2019 05:48:49 +0000 (+0800) Subject: net: usb: asix: ax88772_bind return error when hw_reset fail X-Git-Tag: v4.9.162~11 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=fa30a23499efc1ce7df8390b746bc5b44e763cd7;p=platform%2Fkernel%2Flinux-amlogic.git net: usb: asix: ax88772_bind return error when hw_reset fail [ Upstream commit 6eea3527e68acc22483f4763c8682f223eb90029 ] The ax88772_bind() should return error code immediately when the PHY was not reset properly through ax88772a_hw_reset(). Otherwise, The asix_get_phyid() will block when get the PHY Identifier from the PHYSID1 MII registers through asix_mdio_read() due to the PHY isn't ready. Furthermore, it will produce a lot of error message cause system crash.As follows: asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send software reset: ffffffb9 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0000: -71 asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable software MII access asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0000: -71 ... Signed-off-by: Zhang Run Reviewed-by: Yang Wei Tested-by: Marcel Ziswiler Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 5be6b67492d5..393fd3ed6b94 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -729,8 +729,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0); chipcode &= AX_CHIPCODE_MASK; - (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) : - ax88772a_hw_reset(dev, 0); + ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) : + ax88772a_hw_reset(dev, 0); + + if (ret < 0) { + netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret); + return ret; + } /* Read PHYID register *AFTER* the PHY was reset properly */ phyid = asix_get_phyid(dev);