From: Seung-Woo Kim <sw0312.kim@samsung.com>
Date: Mon, 29 Apr 2019 06:25:36 +0000 (+0900)
Subject: rpi: tizen-boot: rpi3-32b: support to enter the flash mode with command
X-Git-Tag: accepted/tizen/unified/20221108.163909~263
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f9efb2863125a49606176013dc6e33eee11cc156;p=platform%2Fkernel%2Fu-boot.git

rpi: tizen-boot: rpi3-32b: support to enter the flash mode with command

Support to enter the flash mode with command.

- Refer to below command:
U-boot> run tfm

Note: this applies, to rpi3-32b from rpi3, the commit cf212f48a110
("config: tizen_rpi: support to enter the flash mode with command").

Change-Id: I3a801aed172557385abd8651c811708f1f27feec
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
---

diff --git a/board/raspberrypi/rpi/tizen-boot-rpi3-32b.scr b/board/raspberrypi/rpi/tizen-boot-rpi3-32b.scr
index a21beff..13ae5fc 100644
--- a/board/raspberrypi/rpi/tizen-boot-rpi3-32b.scr
+++ b/board/raspberrypi/rpi/tizen-boot-rpi3-32b.scr
@@ -19,6 +19,13 @@ if test -e $bootdev $mmcbootdev:$mmcinformpart $rebootparamfile; then;
 	fi
 fi
 
+# This is for jumping to flash mode on u-boot.
+if test "${bootmode}" = "download"; then;
+	setenv ramdiskpart 8
+	setenv ramdisksize c00000
+	setenv bootmode flash
+fi
+
 if test "${bootmode}" = "flash"; then;
 	if test -n "${ipaddr}"; then;
 		ip_opt=\"ip=${ipaddr}::${gateway}:${netmask}\"