From: John Fastabend <john.r.fastabend@intel.com>
Date: Wed, 23 Feb 2011 05:57:47 +0000 (+0000)
Subject: ixgbe: DCB, implement ieee_setapp dcbnl ops
X-Git-Tag: v2.6.39-rc1~468^2~87^2~13
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f8628d404505e61bfc63638744656ede69227766;p=platform%2Fkernel%2Flinux-exynos.git

ixgbe: DCB, implement ieee_setapp dcbnl ops

Implement ieee_setapp dcbnl ops in ixgbe. This is required
to setup FCoE which requires dedicated resources. If the
app data is not for FCoE then no action is taken in ixgbe
except to add it to the dcb_app_list.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index d7c456f..8d139f7 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -709,6 +709,35 @@ static int ixgbe_dcbnl_ieee_setpfc(struct net_device *dev,
 	return err;
 }
 
+static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev,
+				   struct dcb_app *app)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+
+	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
+		return -EINVAL;
+#ifdef IXGBE_FCOE
+	if (app->selector == 1 && app->protocol == ETH_P_FCOE) {
+		if (adapter->fcoe.tc == app->priority)
+			goto setapp;
+
+		/* In IEEE mode map up to tc 1:1 */
+		adapter->fcoe.tc = app->priority;
+		adapter->fcoe.up = app->priority;
+
+		/* Force hardware reset required to push FCoE
+		 * setup on {tx|rx}_rings
+		 */
+		adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
+		ixgbe_dcbnl_set_all(dev);
+	}
+
+setapp:
+#endif
+	dcb_setapp(dev, app);
+	return 0;
+}
+
 static u8 ixgbe_dcbnl_getdcbx(struct net_device *dev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
@@ -759,6 +788,7 @@ const struct dcbnl_rtnl_ops dcbnl_ops = {
 	.ieee_setets	= ixgbe_dcbnl_ieee_setets,
 	.ieee_getpfc	= ixgbe_dcbnl_ieee_getpfc,
 	.ieee_setpfc	= ixgbe_dcbnl_ieee_setpfc,
+	.ieee_setapp	= ixgbe_dcbnl_ieee_setapp,
 	.getstate	= ixgbe_dcbnl_get_state,
 	.setstate	= ixgbe_dcbnl_set_state,
 	.getpermhwaddr	= ixgbe_dcbnl_get_perm_hw_addr,