From: Pedro Alves Date: Fri, 13 Oct 2017 00:27:18 +0000 (+0100) Subject: Eliminate is_remote check in gdb.base/scope.exp X-Git-Tag: users/ARM/embedded-binutils-master-2017q4~630 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f5ca00321dd8da526b8a6a894465bdc7a14d30ac;p=platform%2Fupstream%2Fbinutils.git Eliminate is_remote check in gdb.base/scope.exp This commit makes --target_board=native-gdbserver (and in principle all other is_remote boards) pass all the same gdb.base/scope.exp tests as native testing. I first wrote the gdb.base/scope.exp change described in the ChangeLog below and in the new comments in the patch, knowing that gdb_file_cmd was the right thing to use here. However, that revealed that the native-extended-gdbserver board should be overriding gdb_file_cmd+gdb_reload instead of gdb_load, as is hinted at by the comments on top of the default implementations in testsuite/lib/gdb.exp, because otherwise a gdb_run_cmd after gdb_file_cmd misses setting "set remote exec-file". However, if we do that and remove gdb_load, then we regress gdb.base/dbx.exp, so for now keep the gdb_load override as well. gdb/testsuite/ChangeLog: 2017-10-13 Pedro Alves * gdb.base/scope.exp: Use build_executable + clean_restart + gdb_file_cmd instead of prepare_for_testing and no longer skip "before run" tests on is_remote target boards. Update comments. * boards/native-extended-gdbserver.exp (extended_gdbserver_load_last_file): New, factored out from ... (gdb_load): ... this. Move further below and add comment. (extended_gdbserver_gdb_file_cmd, gdb_file_cmd, gdb_reload): New. --- diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 06c62f4..38add6f 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,13 @@ +2017-10-13 Pedro Alves + + * gdb.base/scope.exp: Use build_executable + clean_restart + + gdb_file_cmd instead of prepare_for_testing and no longer skip + "before run" tests on is_remote target boards. Update comments. + * boards/native-extended-gdbserver.exp + (extended_gdbserver_load_last_file): New, factored out from ... + (gdb_load): ... this. Move further below and add comment. + (extended_gdbserver_gdb_file_cmd, gdb_file_cmd, gdb_reload): New. + 2017-10-12 Pedro Alves * gdb.base/attach.exp: Remove references to gdb64. diff --git a/gdb/testsuite/boards/native-extended-gdbserver.exp b/gdb/testsuite/boards/native-extended-gdbserver.exp index 4ea210f..564ffd2 100644 --- a/gdb/testsuite/boards/native-extended-gdbserver.exp +++ b/gdb/testsuite/boards/native-extended-gdbserver.exp @@ -80,17 +80,12 @@ proc mi_gdb_start { args } { return 0 } -# Overriden in order to set the remote exec-file whenever a file is -# loaded to gdb. -# -proc gdb_load { arg } { +# Helper that runs "set remote exec-file" with the last loaded file. + +proc extended_gdbserver_load_last_file {} { global gdb_prompt global last_loaded_file - if { $arg != "" } { - if [gdb_file_cmd $arg] then { return -1 } - } - send_gdb "set remote exec-file $last_loaded_file\n" gdb_expect { -re "$gdb_prompt $" {} @@ -103,6 +98,37 @@ proc gdb_load { arg } { return 0 } +# Overriden in order to set the remote exec-file whenever a file is +# loaded to gdb. +# +if { [info procs extended_gdbserver_gdb_file_cmd] == "" } { + rename gdb_file_cmd extended_gdbserver_gdb_file_cmd +} +proc gdb_file_cmd { arg } { + if [extended_gdbserver_gdb_file_cmd $arg] { + return -1 + } + return [extended_gdbserver_load_last_file] +} + +proc gdb_reload { } { + return [extended_gdbserver_load_last_file] +} + +# With the two procedure overrides above, it shouldn't be necessary to +# override this one too. However, not doing so regresses +# gdb.base/dbx.exp. See comments above gdb.base/dbx.exp:gdb_file_cmd. +# Once testing of the "symbol-file"/"exec-file" commands is moved out +# to a separate non-dbx testcase, we should be able to remove this. +proc gdb_load { arg } { + if { $arg != "" } { + if [gdb_file_cmd $arg] then { return -1 } + } + + return [extended_gdbserver_load_last_file] +} + + # Likewise, for MI. # if { [info procs extended_gdbserver_mi_gdb_load] == "" } { diff --git a/gdb/testsuite/gdb.base/scope.exp b/gdb/testsuite/gdb.base/scope.exp index 48d8245..f26775d 100644 --- a/gdb/testsuite/gdb.base/scope.exp +++ b/gdb/testsuite/gdb.base/scope.exp @@ -18,7 +18,7 @@ standard_testfile scope0.c scope1.c -if {[prepare_for_testing "failed to prepare" ${testfile} \ +if {[build_executable "failed to build" ${testfile} \ [list $srcfile $srcfile2] {debug}]} { return -1 } @@ -497,6 +497,13 @@ proc test_at_localscopes {} { gdb_stop_suppressing_tests } +# Note, we don't pass a binfile to clean_restart because we need to +# avoid gdb_load here. With remote targets, gdb_load connects to the +# remote target, and we specificaly want the following tests to run +# before the program is started. +clean_restart +gdb_file_cmd $binfile + # Test that variables in various segments print out correctly before # the program is run. @@ -505,21 +512,15 @@ setup_xfail "rs6000-*-*" gdb_test "print 'scope0.c'::filelocal_ro" "= 201" -# gdb currently cannot access bss memory on some targets if the inferior -# is not running. -# -# For PA boards using monitor/remote-pa.c, the bss test is going to -# randomly fail. We've already put remote-pa on the target stack, -# so we actually read memory from the board. Problem is crt0.o -# is responsible for clearing bss and that hasnt' happened yet. +# Check that gdb can access bss memory if the inferior is not running. # -# This is a problem for all non-native targets. -- manson -if [is_remote target] { - unsupported "print 'scope0.c'::filelocal_bss before run" -} else { - gdb_test "print 'scope0.c'::filelocal_bss" "= 0" \ - "print 'scope0.c'::filelocal_bss before run" -} +# Note the care above about avoiding gdb_load. Otherwise, for +# embedded stub-like boards, this test would randomly fail. If we'd +# already put target remote on the target stack, we'd read memory from +# the board instead of the program's binary, and we would have +# connected before crt0.o had had a chance to clear bss. +gdb_test "print 'scope0.c'::filelocal_bss" "= 0" \ + "print 'scope0.c'::filelocal_bss before run" gdb_test "print 'scope0.c'::filelocal" "= 1" \ "print 'scope0.c'::filelocal before run"