From: Cristian Ciocaltea Date: Thu, 8 Oct 2020 21:44:39 +0000 (+0300) Subject: i2c: owl: Clear NACK and BUS error bits X-Git-Tag: v5.15~2777^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f5b3f433641c543ebe5171285a42aa6adcdb2d22;p=platform%2Fkernel%2Flinux-starfive.git i2c: owl: Clear NACK and BUS error bits When the NACK and BUS error bits are set by the hardware, the driver is responsible for clearing them by writing "1" into the corresponding status registers. Hence perform the necessary operations in owl_i2c_interrupt(). Fixes: d211e62af466 ("i2c: Add Actions Semiconductor Owl family S900 I2C driver") Reported-by: Manivannan Sadhasivam Signed-off-by: Cristian Ciocaltea Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c index 672f1f2..a163b8f 100644 --- a/drivers/i2c/busses/i2c-owl.c +++ b/drivers/i2c/busses/i2c-owl.c @@ -176,6 +176,9 @@ static irqreturn_t owl_i2c_interrupt(int irq, void *_dev) fifostat = readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT); if (fifostat & OWL_I2C_FIFOSTAT_RNB) { i2c_dev->err = -ENXIO; + /* Clear NACK error bit by writing "1" */ + owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOSTAT, + OWL_I2C_FIFOSTAT_RNB, true); goto stop; } @@ -183,6 +186,9 @@ static irqreturn_t owl_i2c_interrupt(int irq, void *_dev) stat = readl(i2c_dev->base + OWL_I2C_REG_STAT); if (stat & OWL_I2C_STAT_BEB) { i2c_dev->err = -EIO; + /* Clear BUS error bit by writing "1" */ + owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT, + OWL_I2C_STAT_BEB, true); goto stop; }