From: Eilon Greenstein Date: Wed, 12 Aug 2009 08:23:11 +0000 (+0000) Subject: bnx2x: Supporting PHY FW upgrade X-Git-Tag: v2.6.32-rc1~703^2~406 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f57a60256d02daba1316c98da472f02cd98a58d3;p=profile%2Fivi%2Fkernel-x86-ivi.git bnx2x: Supporting PHY FW upgrade There are 3 operations that the driver needs to support to allow applications to access the PHY FW (on top of the MDC/MDIO access). Since those are essentially nvram access commands, adding them to the ethtool -E interface. Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index 371310d..98e3e8f 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -1996,7 +1996,7 @@ static u8 bnx2x_emac_program(struct link_params *params, /*****************************************************************************/ /* External Phy section */ /*****************************************************************************/ -static void bnx2x_hw_reset(struct bnx2x *bp, u8 port) +void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port) { bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, MISC_REGISTERS_GPIO_OUTPUT_LOW, port); @@ -2035,7 +2035,7 @@ static void bnx2x_ext_phy_reset(struct link_params *params, params->port); /* HW reset */ - bnx2x_hw_reset(bp, params->port); + bnx2x_ext_phy_hw_reset(bp, params->port); bnx2x_cl45_write(bp, params->port, ext_phy_type, @@ -2106,8 +2106,7 @@ static void bnx2x_ext_phy_reset(struct link_params *params, params->port); /* HW reset */ - bnx2x_hw_reset(bp, params->port); - + bnx2x_ext_phy_hw_reset(bp, params->port); break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: @@ -2118,7 +2117,7 @@ static void bnx2x_ext_phy_reset(struct link_params *params, params->port); /* HW reset */ - bnx2x_hw_reset(bp, params->port); + bnx2x_ext_phy_hw_reset(bp, params->port); bnx2x_cl45_write(bp, params->port, ext_phy_type, @@ -2146,7 +2145,7 @@ static void bnx2x_ext_phy_reset(struct link_params *params, case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: DP(NETIF_MSG_LINK, "SerDes 5482\n"); - bnx2x_hw_reset(bp, params->port); + bnx2x_ext_phy_hw_reset(bp, params->port); break; default: @@ -6573,7 +6572,7 @@ static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base) swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); - bnx2x_hw_reset(bp, 1 ^ (swap_val && swap_override)); + bnx2x_ext_phy_hw_reset(bp, 1 ^ (swap_val && swap_override)); msleep(5); if (swap_val && swap_override) @@ -6647,7 +6646,7 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base) (1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT))); REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val); - bnx2x_hw_reset(bp, 1); + bnx2x_ext_phy_hw_reset(bp, 1); msleep(5); for (port = 0; port < PORT_MAX; port++) { /* Extract the ext phy address for the port */ @@ -6714,9 +6713,7 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base) return rc; } - - -static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr) +void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr) { u16 val, cnt; @@ -7032,7 +7029,7 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port, for (cnt = 0; cnt < 100; cnt++) msleep(5); - bnx2x_hw_reset(bp, port); + bnx2x_ext_phy_hw_reset(bp, port); for (cnt = 0; cnt < 100; cnt++) msleep(5); diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h index d25ef45..9805d21 100644 --- a/drivers/net/bnx2x_link.h +++ b/drivers/net/bnx2x_link.h @@ -187,6 +187,10 @@ u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars); /* One-time initialization for external phy after power up */ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base); +/* Reset the external PHY using GPIO */ +void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port); + +void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr); u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr, u8 byte_cnt, u8 *o_buf); diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 14586676..7853977 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -9353,7 +9353,8 @@ static int bnx2x_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *eebuf) { struct bnx2x *bp = netdev_priv(dev); - int rc; + int port = BP_PORT(bp); + int rc = 0; if (!netif_running(dev)) return -EAGAIN; @@ -9365,27 +9366,62 @@ static int bnx2x_set_eeprom(struct net_device *dev, /* parameters already validated in ethtool_set_eeprom */ - /* If the magic number is PHY (0x00504859) upgrade the PHY FW */ - if (eeprom->magic == 0x00504859) - if (bp->port.pmf) { + /* PHY eeprom can be accessed only by the PMF */ + if ((eeprom->magic >= 0x50485900) && (eeprom->magic <= 0x504859FF) && + !bp->port.pmf) + return -EINVAL; + + if (eeprom->magic == 0x50485950) { + /* 'PHYP' (0x50485950): prepare phy for FW upgrade */ + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + bnx2x_acquire_phy_lock(bp); + rc |= bnx2x_link_reset(&bp->link_params, + &bp->link_vars, 0); + if (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config) == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, + MISC_REGISTERS_GPIO_HIGH, port); + bnx2x_release_phy_lock(bp); + bnx2x_link_report(bp); + + } else if (eeprom->magic == 0x50485952) { + /* 'PHYR' (0x50485952): re-init link after FW upgrade */ + if ((bp->state == BNX2X_STATE_OPEN) || + (bp->state == BNX2X_STATE_DISABLED)) { bnx2x_acquire_phy_lock(bp); - rc = bnx2x_flash_download(bp, BP_PORT(bp), - bp->link_params.ext_phy_config, - (bp->state != BNX2X_STATE_CLOSED), - eebuf, eeprom->len); - if ((bp->state == BNX2X_STATE_OPEN) || - (bp->state == BNX2X_STATE_DISABLED)) { - rc |= bnx2x_link_reset(&bp->link_params, - &bp->link_vars, 1); - rc |= bnx2x_phy_init(&bp->link_params, - &bp->link_vars); - } + rc |= bnx2x_link_reset(&bp->link_params, + &bp->link_vars, 1); + + rc |= bnx2x_phy_init(&bp->link_params, + &bp->link_vars); bnx2x_release_phy_lock(bp); + bnx2x_calc_fc_adv(bp); + } + } else if (eeprom->magic == 0x53985943) { + /* 'PHYC' (0x53985943): PHY FW upgrade completed */ + if (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config) == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) { + u8 ext_phy_addr = + (bp->link_params.ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT; + + /* DSP Remove Download Mode */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, + MISC_REGISTERS_GPIO_LOW, port); - } else /* Only the PMF can access the PHY */ - return -EINVAL; - else + bnx2x_acquire_phy_lock(bp); + + bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr); + + /* wait 0.5 sec to allow it to run */ + msleep(500); + bnx2x_ext_phy_hw_reset(bp, port); + msleep(500); + bnx2x_release_phy_lock(bp); + } + } else rc = bnx2x_nvram_write(bp, eeprom->offset, eebuf, eeprom->len); return rc;