From: Marc Zyngier Date: Wed, 13 Jul 2016 16:18:33 +0000 (+0100) Subject: genirq/msi: Make sure PCI MSIs are activated early X-Git-Tag: v4.8-rc4~4^2~5 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f3b0946d629c8bfbd3e5f038e30cb9c711a35f10;p=platform%2Fkernel%2Flinux-exynos.git genirq/msi: Make sure PCI MSIs are activated early Bharat Kumar Gogada reported issues with the generic MSI code, where the end-point ended up with garbage in its MSI configuration (both for the vector and the message). It turns out that the two MSI paths in the kernel are doing slightly different things: generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI And it turns out that end-points are allowed to latch the content of the MSI configuration registers as soon as MSIs are enabled. In Bharat's case, the end-point ends up using whatever was there already, which is not what you want. In order to make things converge, we introduce a new MSI domain flag (MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set, this flag forces the programming of the end-point as soon as the MSIs are allocated. A consequence of this is that we have an extra activate in irq_startup, but that should be without much consequence. tglx: - Several people reported a VMWare regression with PCI/MSI-X passthrough. It turns out that the patch also cures that issue. - We need to have a look at the MSI disable interrupt path, where we write the msg to all zeros without disabling MSI in the PCI device. Is that correct? Fixes: 52f518a3a7c2 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts" Reported-and-tested-by: Bharat Kumar Gogada Reported-and-tested-by: Foster Snowhill Reported-by: Matthias Prager Reported-by: Jason Taylor Signed-off-by: Marc Zyngier Acked-by: Bjorn Helgaas Cc: linux-pci@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner --- diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index a02981e..eafa613 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -1411,6 +1411,8 @@ struct irq_domain *pci_msi_create_irq_domain(struct fwnode_handle *fwnode, if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS) pci_msi_domain_update_chip_ops(info); + info->flags |= MSI_FLAG_ACTIVATE_EARLY; + domain = msi_create_irq_domain(fwnode, info, parent); if (!domain) return NULL; diff --git a/include/linux/msi.h b/include/linux/msi.h index 4f0bfe5..e8c81fb 100644 --- a/include/linux/msi.h +++ b/include/linux/msi.h @@ -270,6 +270,8 @@ enum { MSI_FLAG_MULTI_PCI_MSI = (1 << 2), /* Support PCI MSIX interrupts */ MSI_FLAG_PCI_MSIX = (1 << 3), + /* Needs early activate, required for PCI */ + MSI_FLAG_ACTIVATE_EARLY = (1 << 4), }; int msi_domain_set_affinity(struct irq_data *data, const struct cpumask *mask, diff --git a/kernel/irq/msi.c b/kernel/irq/msi.c index 5499935..19e9dfb 100644 --- a/kernel/irq/msi.c +++ b/kernel/irq/msi.c @@ -359,6 +359,17 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev, else dev_dbg(dev, "irq [%d-%d] for MSI\n", virq, virq + desc->nvec_used - 1); + /* + * This flag is set by the PCI layer as we need to activate + * the MSI entries before the PCI layer enables MSI in the + * card. Otherwise the card latches a random msi message. + */ + if (info->flags & MSI_FLAG_ACTIVATE_EARLY) { + struct irq_data *irq_data; + + irq_data = irq_domain_get_irq_data(domain, desc->irq); + irq_domain_activate_irq(irq_data); + } } return 0;