From: Brian Masney Date: Thu, 6 Oct 2022 14:55:29 +0000 (-0400) Subject: arm64: dts: qcom: sc8280xp: correct ref clock for ufs_mem_phy X-Git-Tag: v6.1~117^2~7^2~7 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f3aa975e230e060c07dcfdf3fe92b59809422c13;p=platform%2Fkernel%2Flinux-starfive.git arm64: dts: qcom: sc8280xp: correct ref clock for ufs_mem_phy The first UFS host controller fails to start on the SA8540P automotive board (QDrive3) due to the following errors: ufshcd-qcom 1d84000.ufs: ufshcd_query_flag: Sending flag query for idn 18 failed, err = 253 ufshcd-qcom 1d84000.ufs: ufshcd_query_flag: Sending flag query for idn 18 failed, err = 253 ufshcd-qcom 1d84000.ufs: ufshcd_query_flag: Sending flag query for idn 18 failed, err = 253 ufshcd-qcom 1d84000.ufs: ufshcd_query_flag_retry: query attribute, opcode 5, idn 18, failed with error 253 after 3 retries The system eventually fails to boot with the warning: gcc_ufs_phy_axi_clk status stuck at 'off' This issue can be worked around by adding clk_ignore_unused to the kernel command line since the system firmware sets up this clock for us. Let's fix this issue by updating the ref clock on ufs_mem_phy. Note that the downstream MSM 5.4 sources list this as ref_clk_parent. With this patch, the SA8540P is able to be booted without clk_ignore_unused. Signed-off-by: Brian Masney Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Tested-by: Johan Hovold Reviewed-by: Johan Hovold Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20221006145529.755521-1-bmasney@redhat.com --- diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 4921bbaf5caf..f5824f44e15f 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -891,7 +891,7 @@ ranges; clock-names = "ref", "ref_aux"; - clocks = <&rpmhcc RPMH_CXO_CLK>, + clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; resets = <&ufs_mem_hc 0>;