From: Roger Quadros Date: Mon, 17 Nov 2014 12:09:03 +0000 (+0200) Subject: net: can: c_can: Add support for TI am4372 DCAN X-Git-Tag: v4.9.8~5202^2~176^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f2bf2589834faec7af8c02c3949c90788d21b790;p=platform%2Fkernel%2Flinux-rpi3.git net: can: c_can: Add support for TI am4372 DCAN AM4372 SoC has 2 DCAN modules. Add compatible id and raminit driver data for it. The driver data is same as AM3352 but this gives us flexibility to add AM4372 specific quirks if required later. Signed-off-by: Roger Quadros Signed-off-by: Marc Kleine-Budde --- diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt index 6731730..5a1d8b0c 100644 --- a/Documentation/devicetree/bindings/net/can/c_can.txt +++ b/Documentation/devicetree/bindings/net/can/c_can.txt @@ -4,7 +4,8 @@ Bosch C_CAN/D_CAN controller Device Tree Bindings Required properties: - compatible : Should be "bosch,c_can" for C_CAN controllers and "bosch,d_can" for D_CAN controllers. - Can be "ti,dra7-d_can" or "ti,am3352-d_can". + Can be "ti,dra7-d_can", "ti,am3352-d_can" or + "ti,am4372-d_can". - reg : physical base address and size of the C_CAN/D_CAN registers map - interrupts : property with a value describing the interrupt diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index f4488e5..a4535d2 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -235,6 +235,7 @@ static const struct of_device_id c_can_of_table[] = { { .compatible = "bosch,d_can", .data = &d_can_drvdata }, { .compatible = "ti,dra7-d_can", .data = &dra7_dcan_drvdata }, { .compatible = "ti,am3352-d_can", .data = &am3352_dcan_drvdata }, + { .compatible = "ti,am4372-d_can", .data = &am3352_dcan_drvdata }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, c_can_of_table);