From: Benoît Thébaudeau Date: Sun, 14 Jan 2018 18:43:05 +0000 (+0100) Subject: mmc: sdhci-esdhc-imx: Fix i.MX53 eSDHCv3 clock X-Git-Tag: v4.14.15~61 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f2264bb027c6d0ad6405cddb37ca9ebad3209316;p=platform%2Fkernel%2Flinux-exynos.git mmc: sdhci-esdhc-imx: Fix i.MX53 eSDHCv3 clock commit 499ed50f603b4c9834197b2411ba3bd9aaa624d4 upstream. Commit 5143c953a786 ("mmc: sdhci-esdhc-imx: Allow all supported prescaler values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode, thus bypassing the SD clock frequency prescaler, in order to be able to get higher SD clock frequencies in some contexts. However, that commit missed the fact that this value is illegal on the eSDHCv3 instance of the i.MX53. This seems to be the only exception on i.MX, this value being legal even for the eSDHCv2 instances of the i.MX53. Fix this issue by changing the minimum prescaler value if the i.MX53 eSDHCv3 is detected. According to the i.MX53 reference manual, if DLLCTRL[10] can be set, then the controller is eSDHCv3, else it is eSDHCv2. This commit fixes the following issue, which was preventing the i.MX53 Loco (IMX53QSB) board from booting Linux 4.15.0-rc5: [ 1.882668] mmcblk1: error -84 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc00 [ 2.002255] mmcblk1: error -84 transferring data, sector 2050, nr 6, cmd response 0x900, card status 0xc00 [ 12.645056] mmc1: Timeout waiting for hardware interrupt. [ 12.650473] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 12.656921] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001201 [ 12.663366] mmc1: sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000000 [ 12.669813] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 12.676258] mmc1: sdhci: Present: 0x01f8028f | Host ctl: 0x00000013 [ 12.682703] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000000 [ 12.689148] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000003f [ 12.695594] mmc1: sdhci: Timeout: 0x0000008e | Int stat: 0x00000000 [ 12.702039] mmc1: sdhci: Int enab: 0x107f004b | Sig enab: 0x107f004b [ 12.708485] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00001201 [ 12.714930] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x08100810 [ 12.721375] mmc1: sdhci: Cmd: 0x0000163a | Max curr: 0x00000000 [ 12.727821] mmc1: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x00000000 [ 12.734265] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 [ 12.740709] mmc1: sdhci: Host ctl2: 0x00000000 [ 12.745157] mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0xc8049200 [ 12.751601] mmc1: sdhci: ============================================ [ 12.758110] print_req_error: I/O error, dev mmcblk1, sector 2050 [ 12.764135] Buffer I/O error on dev mmcblk1p1, logical block 0, lost sync page write [ 12.775163] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null) [ 12.782746] VFS: Mounted root (ext4 filesystem) on device 179:9. [ 12.789151] mmcblk1: response CRC error sending SET_BLOCK_COUNT command, card status 0x900 Signed-off-by: Benoît Thébaudeau Reported-by: Wladimir J. van der Laan Tested-by: Wladimir J. van der Laan Fixes: 5143c953a786 ("mmc: sdhci-esdhc-imx: Allow all supported prescaler values") Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 85140c9..8b941f8 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -687,6 +687,20 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, return; } + /* For i.MX53 eSDHCv3, SYSCTL.SDCLKFS may not be set to 0. */ + if (is_imx53_esdhc(imx_data)) { + /* + * According to the i.MX53 reference manual, if DLLCTRL[10] can + * be set, then the controller is eSDHCv3, else it is eSDHCv2. + */ + val = readl(host->ioaddr + ESDHC_DLL_CTRL); + writel(val | BIT(10), host->ioaddr + ESDHC_DLL_CTRL); + temp = readl(host->ioaddr + ESDHC_DLL_CTRL); + writel(val, host->ioaddr + ESDHC_DLL_CTRL); + if (temp & BIT(10)) + pre_div = 2; + } + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);